2009 Acura TL Owners Manual

Changes the language used in the display.

ADJUST OUTSIDE TEMP. DISPLAY

Changes the outside temperature reading above or below its current reading.

TRIP COMPUTER TRIP A INFO RESET

Causes trip meter A and the average fuel economy to reset when you refuel.

ADJUST ALARM VOLUME

Changes the indicator alarm volumes into three levels.

AUTO INTERIOR ILLUMINATION

Changes the interior light sensitivity to your liking.

POSITION SETUP (P.107)

KEYLESS START GUIDANCE SCREENS MEMORY POSITION LINK

＊

Changes the display of the keyless start guidance screens. Changes the driver’s seat and the outside mirror positions to a stored setting.

＊ ＊

1: 2 :

Default setting Only on models with Keyless Access system

〜

5°F

〜

3°C

＊

＊

＊

＊

0°F

0°C

ENGLISH FRENCH SPANISH 5°F − 〜 ± (U.S.) 3°C − 〜 ± (Canada) WITH REFUEL MANUAL ONLY IGN OFF HIGH MID ＊ LOW MAX HIGH MID ＊ ON ＊ OFF ON OFF

＊

LOW MIN OFF

99

100

101

103

104

105

108

CONTINUED 93

2009 TL ０８／１２／２３　１７：５９：１２　３１ＴＫ４６００　００９９　

Description

Changes which doors unlock when you use the remote or grab the driver’s door handle. Causes some exterior lights to blink when you unlock/lock the doors by grabbing or touching the sensor/pushing the button on the driver’s door handle. Causes the beeper to sound when you unlock/lock the doors by grabbing or touching the sensor/ pushing the button on the driver’s door handle. Changes how long (in seconds) the interior lights stay on after you close the doors. Changes how long (in seconds) the exterior lights stay on after you close the driver’s door.

Changes the timing of when the headlights come on. The headlight switch needs to be in the AUTO position.

Multi-Information Display

Group Setup

KEYLESS ACCESS SETUP (P.110)

＊

Menu Item

DOOR UNLOCK MODE

KEYLESS ACCESS LIGHT FLASH

LIGHTING SETUP (P.115)

KEYLESS ACCESS BEEP

INTERIOR LIGHT DIMMING TIME HEADLIGHT AUTO OFF TIMER

AUTO LIGHT SENSITIVITY

＊ ＊

1 : 2 :

Default setting Only on models with keyless access system

94

Setting Option

＊

DRIVER DOOR ALL DOORS ON OFF

＊

＊

ON OFF

＊

＊

60 sec 30 sec 60 sec 30 sec 15 sec MAX HIGH MID ＊

15 sec

0 sec

LOW MIN

Page 111

112

113

116

117

118

2009 TL ０８／１２／２３　１７：５９：１９　３１ＴＫ４６００　０１００　

Multi-Information Display

Group Setup

DOOR/WINDOW SETUP (P.120)

Menu Item AUTO DOOR LOCK

Description

Setting Option

Changes when the doors automatically lock.

AUTO DOOR UNLOCK

Changes when the doors automatically unlock.

KEY AND REMOTE UNLOCK MODE

KEYLESS LOCK ACKNOWLEDGMENT

SECURITY RELOCK TIMER

Changes which doors unlock with the remote transmitter/keyless access remote on the first push. The exterior lights flash each time you press the LOCK or UNLOCK button. A beeper will also sound when you press the LOCK button twice. Changes how long it takes (in seconds) for the doors to relock and the security system to set after you unlock but do not open the door. Set/Cancel all the customized settings as default.

DEFAULT ALL (P.129)

＊

: Default setting

＊

SHIFT FROM P WITH VEHICLE SPEED OFF SHIFT TO P/DRIVER DOOR SHIFT TO P/ALL DOORS IGN OFF/DRIVER DOOR IGN OFF/ALL DOORS OFF DRIVER DOOR ALL DOORS

＊

＊

ON OFF

90 sec 60 sec 30 sec SET CANCEL

＊

Page

121

＊

123

125

126

127

129

95

2009 TL ０８／０７／２９　１７：３８：５２　３１ＴＫ４６００　０１０１　

Multi-Information Display

Customize Settings You can customize some of the vehicle control settings to your preference. Here are the settings you can customize:

METER SETUP POSITION SETUP KEYLESS ACCESS SETUP LIGHTING SETUP DOOR/WINDOW SETUP

＊

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown on the next page. Press the INFO ( / ) button until you see the setup you want to customize, then press the SEL/RESET button to enter your selection.

▲ ▼

If you do not make any changes, select ‘‘EXIT,’’ the display returns to normal display.

＊

: Only on models with keyless

access system

When you want to change the vehicle control settings, press the INFO ( / ) button to select CHG SETTING, then press the SEL/ RESET button.

▲ ▼

If you want the settings as they were when the vehicle left the factory, select DEFAULT ALL, as described on page

129

96

2009 TL ０８／０９／０４　１７：２３：００　３１ＴＫ４６００　０１０２　

DEFAULT ALL See page 129.

Multi-Information Display

). : Press the INFO button ( ▲ ▼ : Press the SEL/RESET button. : On models with keyless access system only

＊

METER SETUP See page 98.

POSITION SETUP See page 107.

KEYLESS ACCSESS SETUP ＊ See page 110.

LIGHTING SETUP See page 115.

DOOR/WINDOW SETUP See page 120.

97

2009 TL ０８／０７／２９　１７：３９：０７　３１ＴＫ４６００　０１０３　

Multi-Information Display

Meter Setup Here are the five or six custom settings for the meter setup:

LANGUAGE SELECTION ADJUST OUTSIDE TEMP. DISPLAY TRIP COMPUTER TRIP A INFO RESET ADJUST ALARM VOLUME AUTO INTERIOR ILLUMINATION Onmodelswithkeylessaccess system KEYLESS START GUIDANCE SCREENS

98

See page 99.

See page 100.

See page 101.

See page 103.

See page 104.

Onmodelswithkeylessaccesssystemonly See page 105.

). : Press the INFO button ( ▲ ▼ : Press the SEL/RESET button.

2009 TL ０８／０７／２９　１７：３９：１６　３１ＴＫ４６００　０１０４　

LanguageSelection

While ‘‘METER SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

▲ ▼

Multi-Information Display

There are three language selections you can make: English, French, and Spanish. To choose the language you want, follow these instructions:

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

Press the SEL/RESET button to see the selections.

Select the desired language by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

CONTINUED

99

2009 TL ０８／１２／２３　１８：０２：１５　３１ＴＫ４６００　０１０５　

Multi-Information Display

AdjustOutsideTemp.Display

U.S. models

Canadian models

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘LANGUAGE SELECTION’’ and repeat the procedure again.

If you sometimes find that the temperature reading is a few degrees above or below the actual temperature, you can adjust it by following these instructions:

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly. Press the SEL/RESET button to enter the setting.

▲ ▼

The displayed number is the current adjustment above or below the outside temperature.

Adjust the outside temperature value by pressing the INFO ( / ) button repeatedly. Press the SEL/RESET button to set the desired value.

▲ ▼

100

2009 TL ０８／１２／２３　１８：０２：２９　３１ＴＫ４６００　０１０６　

Multi-Information Display

U.S. models

Canadian models

TripComputerTripAInfoReset You can select the reset timing of the Trip A information: Trip A, Average Fuel Economy A, Average Vehicle Speed A, and Elapsed Time A.

There are three reset choices you can make:

MANUAL ONLY You can reset the Trip A information when Trip A is displayed (see page

−

81

).

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘ADJUST OUTSIDE TEMP. DISPLAY’’ and repeat the procedure again.

−

The Trip A information

IGN OFF is reset when you turn the ignition switch to the LOCK (0) position.

＊

＊

Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. VEHICLE OFF (LOCK) Mode is the equivalent of LOCK (0). For more information, see pages 178

and

180

WITH REFUEL information is reset every time you refuel your vehicle.

The Trip A

−

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

CONTINUED

101

2009 TL ０８／０７／２９　１７：３９：４０　３１ＴＫ４６００　０１０７　

Multi-Information Display

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘TRIP COMPUTER TRIP A INFO RESET’’ and repeat the procedure again.

Press the SEL/RESET button to see the selections.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

102

2009 TL ０８／０７／２９　１７：３９：４８　３１ＴＫ４６００　０１０８　

AdjustAlarmVolume

Select the warning alarm volume from three levels.

Press the SEL/RESET button to see the selections.

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

Select the desired level by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

Multi-Information Display

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘ADJUST ALARM VOLUME’’ and repeat the procedure again.

CONTINUED

103

2009 TL ０８／０７／２９　１７：３９：５６　３１ＴＫ４６００　０１０９　

Multi-Information Display

AutoInteriorIllumination While the headlight switch is turned on, the interior lights gradually dim, as the outside light level gets low. You can customize at which outside light level the lights start to dim.

There are MAX, HIGH, MID, LOW and MIN levels and OFF for the auto interior illumination settings.

If you want the illuminations to start dimming as early as possible, select MAX. For illuminations to start dimming as late as possible, select MIN. Choose HIGH, MID, or LOW for levels in between.

To disable the auto interior illumination function, select OFF.

104

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

Press the SEL/RESET button to see the selections.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

2009 TL ０８／０９／０４　１７：２３：０８　３１ＴＫ４６００　０１１０　

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘AUTO INTERIOR ILLUMINATION’’ and repeat the procedure again.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

Multi-Information Display

KeylessStartGuidanceScreens Onmodelswithkeylessaccesssystem When this item is set to ON, you will see some guidance messages on the multi-information display. You can change this setting between on and off. For more information on start guidance messages, see page 181

CONTINUED

105

2009 TL ０８／０７／２９　１７：４０：０９　３１ＴＫ４６００　０１１１　

Multi-Information Display

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

Press the SEL/RESET button to see the selections.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘KEYLESS START GUIDANCE SCREENS’’ and repeat the procedure again.

106

2009 TL ０８／０７／２９　１７：４０：１５　３１ＴＫ４６００　０１１２　

Position Setup You can customize the MEMORY POSITION LINK setting in position setup.

While ‘‘POSITION SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown in the illustration. Press the INFO ( / ) button until you see the custom setting then press the SEL/RESET button to enter your selection.

▲ ▼

Multi-Information Display

See page108.

). : Press the INFO button ( ▲ ▼ : Press the SEL/RESET button.

CONTINUED

107

2009 TL ０８／０７／２９　１７：４０：２３　３１ＴＫ４６００　０１１３　

Multi-Information Display

MemoryPositionLink When Memory Position Link is set to ON, the driver’s seat and the outside mirrors move to the positions stored in memory. To cause the memory to activate, open the driver’s door with the remote transmitter. On models with keyless access system, open the driver’s door with the remote, or grab the door handle while carrying the remote.

To set the memory positions, see page

164

Onmodelswithkeylessaccesssystem For information on using the remote, see page

167

You can choose this item to customize from ‘‘POSITION SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to see the selections.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

108

2009 TL ０８／０７／２９　１７：４０：２７　３１ＴＫ４６００　０１１４　

Multi-Information Display

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘MEMORY POSITION LINK’’ and repeat the procedure again.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

109

2009 TL ０８／０７／２９　１７：４０：３６　３１ＴＫ４６００　０１１５　

Multi-Information Display

Keyless Access Setup Onmodelswithkeylessaccesssystem There are three custom settings for the keyless access setup:

DOOR UNLOCK MODE KEYLESS ACCESS LIGHT FLASH KEYLESS ACCESS BEEP

While ‘‘KEYLESS ACCESS SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown in the illustration. Press the INFO ( / ) button, until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

▲ ▼

110

See page111.

See page112.

See page 113.

: Press the INFO button ( ). ▲ ▼ : Press the SEL/RESET button.

2009 TL ０８／０７／２９　１７：４０：４４　３１ＴＫ４６００　０１１６　

DoorUnlockMode

Multi-Information Display

To select whether the driver’s door or all doors unlock when you open the driver’s door with the remote or by grabbing the door handle (while carrying the remote), follow these instructions:

You can choose this item to customize from ‘‘KEYLESS ACCESS SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to see the selections.

Select DRIVER DOOR or ALL DOORS by pressing the INFO ( / ▲ ) button, then enter your selection ▼ by pressing the SEL/RESET button.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘DOOR UNLOCK MODE’’ and repeat the procedure again.

CONTINUED

111

2009 TL ０８／０７／２９　１７：４０：５１　３１ＴＫ４６００　０１１７　

Multi-Information Display

KeylessAccessLightFlash When KEYLESS ACCESS LIGHT FLASH is set to ON, some exterior lights blink twice when you unlock the doors by grabbing the driver’s door handle while carrying the remote.

The same exterior lights blink once when you lock the doors by pushing the door lock button while carrying the remote.

You can choose this item to customize from ‘‘KEYLESS ACCESS SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to see the selections.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

112

2009 TL ０８／０７／２９　１７：４０：５８　３１ＴＫ４６００　０１１８　

KeylessAccessBeep When KEYLESS ACCESS BEEP is set to ON, the beeper sounds twice when you unlock the doors by grabbing the drivers door handle while carrying the remote.

When you lock the doors by pushing the door lock button while carrying the remote, the beeper sounds once.

Multi-Information Display

You can choose this item to customize from ‘‘KEYLESS ACCESS SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

CONTINUED

113

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘KEYLESS ACCESS LIGHT FLASH’’ and repeat the procedure again.

2009 TL ０８／０７／２９　１７：４１：０４　３１ＴＫ４６００　０１１９　

Multi-Information Display

Press the SEL/RESET button to see the selections.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘KEYLESS ACCESS BEEP’’ and repeat the procedure again.

114

2009 TL ０８／０７／２９　１７：４１：１３　３１ＴＫ４６００　０１２０　

Lighting Setup Here are the three custom settings for the lighting setup:

INTERIOR LIGHT DIMMING TIME HEADLIGHT AUTO OFF TIMER AUTO LIGHT SENSITIVITY

While ‘‘LIGHTING SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

▲ ▼

Multi-Information Display

See page 116.

See page 117.

See page 118.

). : Press the INFO button ( ▲ ▼ : Press the SEL/RESET button.

CONTINUED

115

2009 TL ０８／０７／２９　１７：４１：２０　３１ＴＫ４６００　０１２１　

Multi-Information Display

InteriorLightDimmingTime

The interior lights fade out when you close all doors. To change how long the lights stay on before they fade out, follow these instructions:

You can choose this item to customize from ‘‘LIGHTING SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to see the selections.

Select the desired setting (15 SEC, 30 SEC, or 60 SEC) by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘INTERIOR LIGHT DIMMING TIME’’ and repeat the procedure again.

116

2009 TL ０８／０７／２９　１７：４１：２７　３１ＴＫ４６００　０１２２　

Multi-Information Display

HeadlightAutoOffTimer The headlights, parking lights, side marker lights, taillights, and license plate lights go off after the selected time when you remove the key from the ignition switch and close the driver’s door. On models with keyless access system, the lights go off after the selected time when you close the driver’s door and take the remote with you. To change how long the lights stay on before they go off, follow these instructions:

You can choose this item to customize from ‘‘LIGHTING SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to see the selections.

Select the desired setting (60 SEC, 30 SEC, 15 SEC or 0 SEC) by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

CONTINUED

117

2009 TL ０８／０７／２９　１７：４１：３７　３１ＴＫ４６００　０１２３　

Multi-Information Display

AutoLightSensitivity The headlights automatically come on when the headlight switch is in the AUTO position and the ambient light reaches a changeable level. You can select the auto light sensitivity from the following five levels:

−

MAX The headlights come on when it is bright.

−

HIGH The headlights come on when it is somewhat bright.

−

MID The headlights come on when it is as bright as sunset or sunrise.

−

LOW The headlights come on when it is somewhat dark.

−

MIN The headlights come on when it is dark.

You can choose this item to customize from ‘‘LIGHTING SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘HEADLIGHT AUTO OFF TIMER’’ and repeat the procedure again.

118

2009 TL ０８／０７／２９　１７：４１：４２　３１ＴＫ４６００　０１２４　

Multi-Information Display

Press the SEL/RESET button to see the selections.

Select the desired setting (MAX, HIGH, MID, LOW or MIN) by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘AUTO LIGHT SENSITIVITY’’ and repeat the procedure again.

119

2009 TL ０８／０７／２９　１７：４１：５２　３１ＴＫ４６００　０１２５　

Multi-Information Display

Door/Window Setup Here are the five custom settings for the door setup:

AUTO DOOR LOCK AUTO DOOR UNLOCK KEY AND REMOTE UNLOCK MODE KEYLESS LOCK ACKNOWLEDGMENT SECURITY RELOCK TIMER

While ‘‘DOOR/WINDOW SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

▲ ▼

120

See page121.

See page123.

See page125.

See page126.

See page127.

). : Press the INFO button ( ▲ ▼ : Press the SEL/RESET button.

2009 TL ０８／０７／２９　１７：４２：０１　３１ＴＫ４６００　０１２６　

Multi-Information Display

AutoDoorLock There are three settings you can choose from:

SHIFT FROM P The doors lock whenever you move the shift lever out of Park.

−

WITH VEHICLE SPEED The doors lock when the vehicle speed reaches about 10 mph (about 16 km/h).

−

−

OFF The auto door lock is deactivated all the time.

You can choose this item to customize from ‘‘DOOR/WINDOW SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to enter the selecting mode.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

CONTINUED

121

2009 TL ０８／０７／２９　１７：４２：０５　３１ＴＫ４６００　０１２７　

Multi-Information Display

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘AUTO DOOR LOCK’’ and repeat the procedure again.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

122

2009 TL ０８／１２／２３　１８：０２：３９　３１ＴＫ４６００　０１２８　

Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. VEHICLE OFF (LOCK) Mode is the equivalent of LOCK (0). For more information, see pages 178

and

180

AutoDoorUnlock There are five possible settings you can choose from:

＊

DRIVER DOOR WITH SHIFT TO P − you move the shift lever to Park.

The driver’s door unlocks when

ALL DOORS WITH SHIFT TO P − All the doors unlock when you move the shift lever to Park.

DRIVER DOOR WITH IGN OFF − The driver’s door unlocks when you turn the ignition switch to the LOCK (0) position.

＊

ALL DOORS WITH IGN OFF All the doors unlock when you turn the ignition switch to the LOCK (0) position.

−

＊

−

OFF deactivated all the time.

The auto door unlock is

Multi-Information Display

You can choose this item to customize from ‘‘DOOR/WINDOW SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

CONTINUED

123

2009 TL ０８／０７／２９　１７：４２：２０　３１ＴＫ４６００　０１２９　

Multi-Information Display

Press the SEL/RESET button to see the selections.

If you choose ‘‘IGN OFF,’’ you will see the above display.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

▲ ▼

Press the INFO ( / ) button to switch the door lock mode setting between the driver’s door and all doors. Then, press the SEL/RESET button to enter your selection.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘AUTO DOOR UNLOCK’’ and repeat the procedure again.

124

2009 TL ０８／０７／２９　１７：４２：２９　３１ＴＫ４６００　０１３０　

KeyandRemoteUnlockMode

Multi-Information Display

You can select whether the driver’s door or all the doors unlock the first time you press the unlock button on the remote transmitter/keyless access remote.

You can choose this item to customize from ‘‘DOOR/WINDOW SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to enter the selecting mode.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘KEY AND REMOTE UNLOCK MODE’’ and repeat the procedure again.

CONTINUED

125

2009 TL ０８／１２／２３　１８：０２：４９　３１ＴＫ４６００　０１３１　

Multi-Information Display

KeylessLockAcknowledgment When you push the LOCK button on the remote transmitter or the keyless access remote, some exterior lights flash, and a beeper sounds when you push the LOCK button again within 5 seconds to verify that the doors and the trunk are locked and the security system has set (see page customize the exterior lights not to flash and the beeper not to sound.

). You can

380

You can choose this item to customize from ‘‘DOOR/WINDOW SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to enter the selecting mode.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

When you press the UNLOCK button on the remote transmitter or the keyless access remote to unlock the driver’s door/all the doors (depending on the customize setting), the exterior lights blink twice to verify that the door(s) is unlocked and the security system is turned off.

To turn this feature on or off, follow these instructions.

126

2009 TL ０８／１２／２３　１８：０２：５８　３１ＴＫ４６００　０１３２　

Multi-Information Display

SecurityRelockTimer If you unlock the doors with the remote transmitter or the keyless access remote, but do not open any of the doors within 30 seconds, the doors automatically relock, and the security system sets.

You can change this relock time from 30 seconds to 60 or 90 seconds.

Onmodelswithkeylessaccesssystem When you unlock the doors by touching either front door handle while carrying the keyless access remote, the relock time is fixed in 30
seconds.

You can choose this item to customize from ‘‘DOOR/WINDOW SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

CONTINUED

127

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘KEYLESS LOCK ACKNOWLEDGMENT’’ and repeat the procedure again.

2009 TL ０８／０７／２９　１７：４２：４９　３１ＴＫ４６００　０１３３　

Multi-Information Display

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘SECURITY RELOCK TIMER’’ and repeat the procedure again.

Press the SEL/RESET button to enter the selecting mode.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

128

2009 TL ０８／０７／２９　１７：４２：５７　３１ＴＫ４６００　０１３４　

DEFAULT ALL

If you want to set the default settings, press the INFO ( / ) button to select DEFAULT ALL, then press the SEL/RESET button.

▲ ▼

To set the default settings, press the INFO ( / ) button to select SET then press the SEL/RESET button.

▲ ▼

If you want to cancel DEFAULT ALL, select CANCEL, then press the SEL/RESET button. The screen goes back to the previous display.

Multi-Information Display

When DEFAULT ALL is set, you will see the above display for several seconds, then the screen returns to the default all setting display.

If the setting is not successfully completed, ‘‘FAILED’’ is shown for several seconds, and then the screen goes back to the normal message mode. Repeat the same procedure to select DEFAULT ALL.

129

2009 TL ０８／０７／２９　１７：４３：０６　３１ＴＫ４６００　０１３５　

Controls Near the Steering Wheel

REMOTE AUDIO CONTROL BUTTONS (P. 374)

PADDLE SHIFTERS

(P. 512)

HEADLIGHTS/TURN SIGNALS/ FOG LIGHTS (P. 133, 137)

INSTRUMENT PANEL BRIGHTNESS (P. 137)

BLUETOOTH HANDSFREELINK SYSTEM BUTTONS (P. 394)

VEHICLE STABILITY ASSIST (VSA) SYSTEM OFF SWITCH (P. 524) HEADLIGHT WASHERS ＊ (P. 132)

VOICE CONTROL BUTTONS for NAVIGATION SYSTEM / BLUETOOTH HANDSFREELINK SYSTEM (P. 420, 424)

＊

STEERING WHEEL ADJUSTMENTS (P. 140)

HORN ＊

MULTI-INFORMATION DISPLAY BUTTONS (P. 78)

WINDSHIELD WIPERS/WASHERS (P. 131)

ENGINE START/STOP BUTTON (P. 177)

NAVIGATION DISPLAY

＊

PASSENGER AIR BAG OFF INDICATOR (P. 134)

HAZARD WARNING BUTTON (P. 139)

CENTER DISPLAY (P. 215, 278) REAR WINDOW DEFOGGER/HEATED MIRROR BUTTON (P. 139, 163) INTERFACE DIAL SELECTOR KNOB (P. 224) SEAT HEATER SWITCHES

(P. 193)

(P. 277) ＊

KEYLESS ACCESS REMOTE SLOT (P. 189)

Vehicle with navigation system is shown.

CRUISE CONTROL BUTTONS

(P. 386)

To use the horn, press the center pad of the steering wheel. If equipped Refer to the navigation system owner’s manual.

1 : ＊ 2 : ＊ 3 : ＊ 130

2009 TL ０８／０７／２９　１７：４３：１６　３１ＴＫ４６００　０１３６　

Windshield Wipers and Washers

ADJUSTMENT RING

1. 2. 3. 4. 5. 6.

MIST OFF INT LO Low speed HI High speed Windshield washers

Intermittent

− − −

Push the right lever up or down to select a position.

MIST

−

The wipers run at high

speed until you release the lever.

OFF

−

The wipers are not activated.

INT

−

The length of the wipe

interval is varied automatically according to vehicle’s speed.

LO

−

The wipers run at low speed.

HI

−

The wipers run at high speed.

−

Windshield Washers

Pull the wiper control lever toward you, and hold it. The washers spray until you release the lever. The wipers run at low speed, then complete one more sweep after you release the lever.

Vary the delay by turning the adjustment ring. If you turn it to the shortest delay ( position), the wipers change to low speed operation when the vehicle speed exceeds 12 mph (20 km/h).

CONTINUED

131

2009 TL ０８／１２／２３　１８：０３：０６　３１ＴＫ４６００　０１３７　

Windshield Wipers and Washers

CanadianSH-AWDmodelsonly When you activate the windshield washer with the headlights turned on, the headlight washer will be activated under certain conditions. For more information, see Washers

Headlight section in the next column.

132

Headlight Washers CanadianSH-AWDmodelsonly

HEADLIGHT WASHER SWITCH

The headlight washers use the same fluid reservoir as the windshield washers.

Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. ON Mode is the equivalent of ON (II). For more information, see pages 178

and

180

＊

The headlight washers can be operated at any time by pressing the headlight washer button located next to the steering wheel column. The