Download PDF Manual

information to the HFL.


You will also see a ‘‘HANDS FREELINK’’ on the upper display.


Bluetooth HandsFreeLink


Multi-Information Display


SIGNAL STRENGTH


HFL MODE MESSAGE


BATTERY LEVEL STATUS


ROAM STATUS


PHONE DIALING


When you are operating the HFL, or when you manually select HFL in the multi-information display, you will see this information in the display:


254


2008 RDX 07/06/04 18:13:06 31STK610 0260 


How to Use the HFL The HFL is operated by the HFL Talk and Back buttons on the left side of the steering wheel. The next few pages provide instructions for all basic features of the HFL.


All phones may not


NOTE: operate identically, and some may cause inconsistent operation of the HFL.


Bluetooth HandsFreeLink


To hear a list of available options at any time, press the Talk button, wait for the beep, and say, ‘‘Hands free link help.’’


Many commands can be spoken together. For example, you can say, ‘‘Dial 123-456-7891.’’


To enter a string of numbers in a Call or Dial command, you can say them all at once, or you can separate them in blocks of 3, 4, 7, 10, or 11.


To skip a voice prompt, press the Talk button while the HFL is speaking. The HFL will then begin listening for your next command.


Using Voice Control Here are some guidelines for using voice control:


To enter a command, press the Talk button. Then, after the beep, say your command in a clear, natural tone.


For best system operation, set the climate control fan speed to low, and direct the center vents away from the microphone in the ceiling.


If the HFL does not recognize a command, its response is, ‘‘Pardon.’’ If it doesn’t recognize the command a second time, its response is, ‘‘Please repeat.’’ If it doesn’t recognize the command a third time, it plays the Help prompt.


CONTINUED


255


2008 RDX 07/06/01 19:04:32 31STK610 0261 


Bluetooth HandsFreeLink


To go back one step in a command process, say, ‘‘Go back,’’ or press the Back button. If nothing is said while the HFL is listening for a command, the HFL will time out and stop its voice recognition. The next time you press the Talk button, the HFL begins listening from the point at which it timed out.


To end a command sequence at any time, press and hold the Back button, or press and release the Talk button, wait for the beep, and say, ‘‘Cancel.’’ The next time you press the Talk button, the HFL begins from its main menu.


When you finish a command sequence, the HFL goes back to its main menu. For example, when you store the name, ‘‘Eric,’’ the HFL response is, ‘‘Eric has been stored.’’ The next time you press the Talk button, you will be at the main menu.


Setting Up the System The voice of the HFL can be set to male or female (U.S. models only). Also, the incoming notification can be set to a ring tone, a prompt, or no notification.


Tosetupthesystem,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘System.’’ The HFL response is, ‘‘System options are setup and clear.’’


256


2.


3.


Press and release the Talk button. After the beep, say ‘‘Setup.’’ The HFL response is ‘‘Would you like male or female prompts?’’


Press and release the Talk button. After the beep, say ‘‘Male’’ or ‘‘Female,’’ depending on the system voice you want. The HFL response is, ‘‘Male (Female) prompts have been selected. Would you like an audible notification of an incoming call?’’


2008 RDX 07/06/01 19:04:42 31STK610 0262 


4.


Press and release the Talk button. If you say ‘‘Yes’’ after the beep, the HFL system response is, ‘‘Would you like the notification to be a ring tone or a prompt?’’ If you say ‘‘No’’ after the beep, the HFL system returns to its main menu. Saying ‘‘No’’ will result in no ring tone or prompt playback during an incoming call. The audio system will be mute, and a message will be displayed.


5.


Press and release the Talk button. After the beep, say ‘‘Ring tone’’ or ‘‘Prompt.’’ The HFT system response is ‘‘A ring tone will be used.’’ or ‘‘An incoming call prompt will be used.’’


Pairing Your Phone Your Bluetooth compatible phone with Hands-Free Profile must be paired to the HFL before you can make and receive hands-free calls. To confirm that your phone is


Bluetooth compatible, visit www.acura.com/handsfreelink or call 1-888-528-7876. In Canada, visit www.acura.ca, or call 1-888-9-ACURA-9. Your phone retailer should also be able to confirm that your phone is Bluetooth compatible.


NOTE:


HFL does not allow you to pair your phone if the vehicle is moving. For pairing, your phone must be in its Discovery mode. Up to six phones can be paired to the HFL. The following procedure works for most phones. If you cannot pair your phone to the HFL with this procedure, refer to your phone’s operating manual, visit com/handsfreelink HandsFreeLink consumer support at your retailer. In Canada, visit acura.ca


(888)9-ACURA-9


(888)528-7876


www.acura.


, or call


, or call


, call at


www.


Bluetooth HandsFreeLink


1.


2.


During the pairing process, turn off any previously paired phones before pairing a new phone.


With your phone on and the ignition in the ACCESSORY (I) or ON (II) position, press and release the Talk button. After the beep, say ‘‘Phone setup.’’ The HFL response is ‘‘Phone setup options are status, pair, edit, delete, and list.’’


Press and release the Talk button. After the beep, say ‘‘Pair.’’ The HFL response is ‘‘The pairing process requires operation of your mobile phone. For safety, only perform this function while the vehicle is stopped. State a four- digit code for pairing. Note this code. It will be requested by the phone.’’


CONTINUED


257


2008 RDX 07/06/01 19:04:49 31STK610 0263 


Bluetooth HandsFreeLink


3.


4.


Press and release the Talk button. After the beep, say the four-digit code you want to use. For example, say ‘‘1, 2, 3, 4.’’ The HFL response is, ‘‘1, 2, 3, 4. Is this correct?’’


Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is ‘‘Searching for a Bluetooth phone. Make sure the phone you are trying to pair is in Discovery mode.’’


Steps 5 and 6 show a


NOTE: common way to get your phone into its Discovery mode. If these steps do not work on your phone, refer to the phone’s operating manual.


258


5.


6.


7.


Follow the prompts on your phone to get it into its Discovery mode. The phone will search for the HFL. When it comes up, select HandsFreeLink from the list of options displayed on your phone.


When asked by the phone, enter the four-digit code from step 3 into your phone. The HFL response is ‘‘A new phone has been found. What would you like to name this phone?’’


Press and release the Talk button. After the beep, say the name you want to use. For example, say ‘‘Eric’s phone.’’ The HFL response is ‘‘Eric’s phone has been successfully paired. Returning to the main menu.’’


8.


If you want to pair another phone, repeat steps 1 through 7.


Once the pairing process is completed, AcuraLink may display a connection confirmation screen. This screen is used to create a data connection between your cell phone and the AcuraLink system. You can choose to set up the data connection now, or do it later. If you want to do it now, exit the HFL menu by pressing the HFL Back button one or more times.


2008 RDX 07/06/01 19:04:59 31STK610 0264 


Torenameapairedphone,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ The HFL response is ‘‘Phone setup options are status, pair, edit, delete, and list.’’


Todeleteapairedphone,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ The HFL response is, ‘‘Phone setup options are status, pair, edit, delete, and list.’’


2.


3.


Press and release the Talk button. After the beep, say ‘‘Delete.’’ The HFL response is, ‘‘Which phone would you like to delete?’’


Press and release the Talk button. After the beep, say the name of the phone you want to delete. For example say ‘‘Eric’s phone.’’ The HFL response is ‘‘Would you like to delete Eric’s phone?’’


2.


3.


4.


Press and release the Talk button. After the beep, say ‘‘Edit.’’ The HFL response is ‘‘Which phone would you like to edit?’’


Press and release the Talk button. After the beep, say the name of the phone you want to rename. For example, say ‘‘Eric’s phone.’’ The HFL response is ‘‘What is the new name for Eric’s phone?’’


Press and release the Talk button. After the beep, say the new name of the phone. For example, say ‘‘Lisa’s phone.’’ The HFL response is, ‘‘The name has been changed. Returning to the main menu.’’


Bluetooth HandsFreeLink


4.


5.


Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is ‘‘Preparing to delete Eric’s phone.’’ Say ‘‘OK’’ to continue. Otherwise, say ‘‘Go back,’’ or ‘‘Cancel.’’


Press and release the Talk button. If you say ‘‘OK’’ after the beep, the HFL response is ‘‘The phone has been deleted. Returning to the main menu.’’ If you say ‘‘Go back,’’ or ‘‘Cancel,’’ the phone will not be deleted.


CONTINUED


259


2008 RDX 07/06/01 19:05:06 31STK610 0265 


Bluetooth HandsFreeLink


Tolistallpairedphones,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ The HFL response is ‘‘Phone setup options are status, pair, edit, delete, and list.’’


2.


Press and release the Talk button. After the beep, say ‘‘List.’’ The HFL responds by listing the name of each paired phone. When all phones paired to the system have been read, the HFL response is ‘‘The entire list has been read. Returning to the main menu.’’


Tofindoutthestatusofthephonebeing used,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ The HFL response is ‘‘Phone setup options are status, pair, edit, delete, and list.’’


2.


Press and release the Talk button. After the beep, say ‘‘Status.’’ An example of the HFL response is, ‘‘Eric’s phone is linked. Battery strength is three bars. Signal strength is five bars, and the phone is roaming. Returning to the main menu.’’


Tochangefromthecurrentlylinked phonetoanotherpairedphone,dothis: Press and release the Talk button. 1. After the beep, say ‘‘Next phone.’’ The HFL response is ‘‘Searching for the next phone.’’ The HFL then disconnects the linked phone and searches for another paired phone. If no other phones are found, the first phone remains linked.


260


2008 RDX 07/06/01 19:05:12 31STK610 0266 


Making a Call You can make calls using any phone number, or by using a name in the HFL phonebook. You can also redial the last number called. During a call, the HFL allows you to talk up to 30
minutes after you remove the key from the ignition switch. Continuing a call without running the engine may discharge and weaken the vehicle’s battery.


Tomakeacallusingaphonenumber, dothis: 1.


With your phone on and the ignition in the ACCESSORY (I) or ON (II) position, press and release the Talk button. After the beep, say ‘‘Call’’ or ‘‘Dial.’’ The HFL response is, ‘‘What name or number would you like to call/ dial?’’


2.


Press and release the Talk button. After the beep, say the number you want to call. For example, say ‘‘123 456 7891.’’ The HFL response is ‘‘123 456 7891. Say call, dial, or continue to add numbers.’’


Bluetooth HandsFreeLink


3.


Press and release the Talk button. After the beep, say ‘‘Call’’ or ‘‘Dial.’’ The HFL response is ‘‘Calling’’ or ‘‘Dialing.’’ Once connected, you will hear the person you called through the audio speakers. To change the volume, use the audio system volume knob.


4.


To end the call, press the Back button.


CONTINUED


261


2008 RDX 07/06/01 19:05:18 31STK610 0267 


3.


Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is ‘‘Calling’’ or ‘‘Dialing.’’ Once connected, you will hear the person you called through the audio speakers. To change the volume, use the audio system volume knob.


4.


To end the call, press the Back button.


To redial the last number called by the phone, press and release the Talk button. After the beep, say ‘‘Redial.’’ The HFL response is, ‘‘Redialing.’’ Once connected, you will hear the person you called through the audio speakers. To change the volume, use the audio system volume knob.


Bluetooth HandsFreeLink


TomakeacallusinganameintheHFL phonebook,dothis: 1.


With your phone on and the ignition in the ACCESSORY (I) or ON (II) position, press and release the Talk button. After the beep, say ‘‘Call’’ or ‘‘Dial.’’ The HFL response is ‘‘What name or number would you like to call/ dial?’’


2.


Press and release the Talk button. After the beep, say the name you want to call. For example, say ‘‘Eric.’’ The HFL response is ‘‘Would you like to call Eric?’’


262


2008 RDX 07/06/01 19:05:27 31STK610 0268 


Bluetooth HandsFreeLink


Sending Numbers or Names During a Call The HFL allows you to send numbers or names during a call. This is useful when you call a menu- driven phone system. You can also program account numbers into the HFL phonebook for easy retrieval during menu-driven calls.


Tosendanumberduringacall,dothis: 1. Press and release the Talk button. After the beep, say ‘‘Send.’’ The HFL response is, ‘‘What name or number would you like to send?’’


Tosendanameduringacall,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘Send.’’ The HFL response is ‘‘What name or number would you like to send?’’


2.


Press and release the Talk button. After the beep, say the number you want to send. For example, say ‘‘1, 2, 3.’’ The HFL response is ‘‘1, 2, 3. Say send, or continue to add numbers.’’


2.


Press and release the Talk button. After the beep, say the name you want to send. For example, say ‘‘Account number.’’ The HFL response is ‘‘Would you like to send account number?’’


To send pound (


NOTE: ‘‘pound.’’ To send star (*), say ‘‘star.’’


) , say



3.


Press and release the Talk button. After the beep, say ‘‘Send.’’ The dial tones will be sent, and the call will continue.


3.


Press and release the Talk button. After the beep, say ‘‘Send.’’ The dial tones will be sent, and the call will continue.


263


2008 RDX 07/06/01 19:05:38 31STK610 0269 


Transferring a Call During a call, you can transfer it from the HFL to your phone, or from your phone to the HFL.


Muting a Call During a call, you can mute or unmute your voice to the person you are talking to.


TotransferacallfromtheHFLtoyour phone,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘Transfer.’’ The audio switches from the HFL to the phone.


Totransferacallfromyourphonetothe HFL,dothis: 2.


Press and release the Talk button. After the beep, say ‘‘Transfer.’’ The audio switches from your phone to the HFL.


Tomuteyourvoice,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘Mute.’’ The HFL response is, ‘‘Mute is active.’’


Tounmuteyourvoice,dothis: 2.


Press and release the Talk button. After the beep, say ‘‘Mute.’’ The HFL response is, ‘‘Mute is canceled.’’


Bluetooth HandsFreeLink


Receiving a Call If you receive a call when you are not on the phone, the HFL interrupts the audio system (if it is on), and plays the incoming call notification, if activated. To answer the call, press the Talk button and begin speaking. If you don’t want to answer the call, press the Back button.


If your phone has Call Waiting, and you receive a call when you are on the phone, press and release the Talk button to answer it. When you do this, the original call is placed on hold. To return to the original call, press the Talk button again. If you don’t want to answer the new call, disregard it, and continue with your original call. If you want to hang up the original call and answer the new call, press the Back button.


264


2008 RDX 07/06/01 19:05:46 31STK610 0270 


Bluetooth HandsFreeLink


4.


5.


Press and release the Talk button. After the beep, say the number. For example, say ‘‘123 456 7891.’’ The HFL response is ‘‘123 456
7891.’’


Press and release the Talk button. After the beep, say ‘‘Enter.’’ The HFL response is ‘‘Eric (or account number) has been stored. Returning to the main menu.’’


Setting up the Phonebook The HFL phonebook can store up to 50 names with their associated numbers. These can be any types of numbers. For example, you can store a phone number and use it to make a call, or you can store an account number and use it during a call to a menu-driven phone system.


Toaddaname,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘Phonebook.’’ The HFL response is ‘‘Phonebook options are store, edit, delete, receive contact, and list.’’


2.


3.


Press and release the Talk button. After the beep, say ‘‘Store.’’ The HFL response is, ‘‘What name would you like to store?’’


Press and release the Talk button. After the beep, say the name you would like to store. For example, say ‘‘Eric’’ or say ‘‘account number.’’ The HFL response is ‘‘What is the number for Eric,’’ or ‘‘What is the number for account number?’’


CONTINUED


265


2008 RDX 07/06/01 19:05:56 31STK610 0271 


Bluetooth HandsFreeLink


Toeditthenumberofaname,dothis: Press and release the Talk button. 1. After the beep, say ‘‘Phonebook.’’ The HFL response is ‘‘Phonebook options are store, edit, delete, receive contact, and list.’’


2.


3.


Press and release the Talk button. After the beep, say ‘‘Edit.’’ The HFL response is, ‘‘What name would you like to edit?’’


Press and release the Talk button. After the beep, say the name you would like to edit. For example, say ‘‘Eric.’’ The HFL response is ‘‘What is the new number for Eric?’’


266


4.


5.


Press and release the Talk button. After the beep, say the new number for Eric. For example, say ‘‘987 654 3219.’’ The HFL response is, ‘‘987 654 3219.’’


Press and release the Talk button. After the beep, say ‘‘Enter.’’ The HFL response is ‘‘The number has been changed. Returning to the main menu.’’


Todeleteaname,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘Phonebook.’’ The HFL response is, ‘‘The Phonebook options are store, edit, delete, receive contact, and list.’’


2.


Press and release the Talk button. After the beep, say ‘‘Delete.’’ The HFL response is, ‘‘What name would you like to delete?’’


3.


4.


Press and release the Talk button. After the beep, say the name you would like to delete. For example, say ‘‘Eric.’’ The HFL response is ‘‘Do you want to delete Eric?’’


Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is, ‘‘The name has been deleted. Returning to the main menu.’’


Tolistallnamesinthephonebook,do this: 1.


Press and release the Talk button. After the beep, say ‘‘Phonebook.’’ The HFL response is, ‘‘The Phonebook options are store, edit, delete, and list.’’


2008 RDX 07/06/01 19:06:06 31STK610 0272 


2.


Press and release the Talk button. After the beep, say ‘‘List.’’ The HFL responds by listing the names in the phonebook. When the end of the list is reached, the HFL response is, ‘‘The entire list has been read. Returning to the main menu.’’


3.


Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is ‘‘Calling.’’ Once connected, you will hear the person you called through the audio speakers. To change the volume, use the audio system volume knob.


Tocallanamefromthephonebooklist, dothis: 1.


Press and release the Talk button. After the beep, say ‘‘Phonebook.’’ The HFL response is ‘‘Phonebook options are store, edit, delete, and list.’’


2.


Press and release the Talk button. After the beep, say ‘‘List.’’ The HFL responds by listing the names in the phonebook. When it says the name you want to call, for example, Eric, press the Talk button, and then say ‘‘Call.’’ The HFL response is, ‘‘Would you like to call Eric?’’


Clearing the System This operation clears the HFL of your passcode, your paired phones, and all names in the HFL phonebook. Clearing is recommended before you sell your vehicle.


Toclearthesystem,dothis: 1.


Press and release the Talk button. After the beep, say ‘‘System.’’ The HFL response is, ‘‘System options are setup and clear.’’


Bluetooth HandsFreeLink


2.


3.


Press and release the Talk button. After the beep, say ‘‘Clear.’’ The HFL response is, ‘‘This process will clear all paired phones, clear all entries in the phonebook, clear the passcode, and restore the defaults in the system setup. Is this what you would like to do?’’


Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is ‘‘Preparing to clear all paired phones, all phonebook entries, the passcode, and restore the defaults in the system setup. This may take up to 2 minutes to complete.’’ Press and release the Talk button. After the beep, say ‘‘OK’’ to proceed, otherwise say ‘‘Go back’’ or ‘‘Cancel.’’


4.


If you said ‘‘OK,’’ after a short period of time, the HFL response is, ‘‘System has been cleared. Returning to the main menu.’’


267


2008 RDX 07/06/01 19:06:15 31STK610 0273 


Bluetooth HandsFreeLink


Changing Language (Canadian Models Only) TochangefromEnglishtoFrench,do this: 1.


Press and release the Talk button. After the beep, say ‘‘Change language.’’ The HFL response is ‘‘English or French?’’


2.


3.


Press and release the Talk button. After the beep, say ‘‘Français.’’ The HFL response is ‘‘Vous avez sélectionné le Français. Les noms en registrés dans une autre langue ne seront pas accessible en mode Français. Voulez-vous continuer?’’


Press and release the Talk button. After the beep, say ‘‘Oui’’ or ‘‘Yes.’’ If there are no paired phones without French name tags, the HFL response is ‘‘Venillez attendre que le systeme change de langue. Please wait while the language is changed.’’ ‘‘La langue a ete changee. Retour au menu


268


4.


principal.’’ If there are paired phones without French name tags, the HFL response is ‘‘Pour que le système identifie les téléphones qui ont été jumelés dans une autre langue, les noms des téléphones doivent être ré-enregistrés.’’


If there are paired phones


NOTE: without French name tags, the following prompts will continue.



The HFL response is, for example, ‘‘Quel est le nom Français pour Paul’s phone ?’’ Press and < release the Talk button. After the beep, say ‘‘Téléphone de Paul.’’ The HFL response is, ‘‘Quel est le nom Français pour phone ?’’ Press and release the Talk button. Say ‘‘Téléphone de Pat.’’ After all paired phones missing a French name tag are re- recorded, the HFL will prompt, ‘‘Retour au menu principal.’’


Pat’s




TochangefromFrenchtoEnglish,do this: 1.


Press and release the Talk button. After the beep, say ‘‘Changer Langue.’’ The HFL response is, ‘‘Anglais ou Français?’’


2.


Press and release the Talk button. After the beep, say ‘‘English.’’ The HFL response is, ‘‘You have selected English. Name tags that were stored while in French mode will not be accessible in English mode. Would you like to continue?’’, then the system repeats the response in English.


2008 RDX 07/06/01 19:06:22 31STK610 0274 


?’’ Press


Téléphone de Paul


The HFL says, for example, ‘‘What is the English name for < > and release the Talk button. After the beep, say ‘‘Paul’s phone. ’’ The HFL response is ‘‘What is the English name for Téléphone de Pat ?’’ Press and release the Talk button. After the beep, say ‘‘Pat’s phone.’’ After all paired phones missing an English name tag are re-recorded, the HFL will say ‘‘Returning to the main menu.’’




4.


3.


Press and release the Talk button. After the beep, say ‘‘Yes’’ or ‘‘Oui.’’ If there are no paired phones without English name tags, the HFL response is ‘‘Please wait while the language is changed. Venillez attendre que le systeme change de langue.’’ ‘‘The language has been changed. Returning to the main menu.’’


If there are paired phones without English name tags, the HFL response is ‘‘The language has been changed. For the system to identify phones that were paired while in another language, the phone names need to be re-recorded.’’


If there are paired phones


NOTE: without English name tags, the following prompts will continue.


Bluetooth HandsFreeLink


AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.


Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.


ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.


269


2008 RDX 07/06/01 19:06:28 31STK610 0275 


Rearview Camera and Monitor


OnRDXwithTechnologyPackage model


The camera brightness cannot be adjusted by voice control.


INTERFACE DIAL


Whenever you shift to reverse (R) with the ignition switch in the ON (II) position, the rear view is shown on the navigation system screen.


Since the rearview camera display area is limited, you should always back up slowly and carefully, and look behind you for obstacles.


For the best picture, always keep the rearview camera clean, and do not cover the camera lens. To avoid scratching the lens when you clean it, use a moist, soft cloth.


When in reverse, the navigation buttons are locked out, except the interface dial on the dashboard. Turn the dial clockwise to make the camera image brighter, and counter- clockwise to darken the image.


270


2008 RDX 07/06/01 19:06:32 31STK610 0276 


Before Driving


Before you begin driving your vehicle, you should know what gasoline to use and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. The information in this section will help you. If you plan to add any accessories to your vehicle, please read the information in this section first.


Break-in Period Fuel Recommendation Service Station Procedures


............................. ................. ......... .................................... .....


Refueling Tighten Fuel Cap Message Opening and Closing


. 272
. 272
. 273
. 273
. 274


the Hood


Oil Check Engine Coolant Check


. 275
. 276
. 277
Fuel Economy . 278
Accessories and Modifications . 281
. 283
Carrying Cargo


................................ ................................... ............. ............................... ... .............................


271


2008 RDX 07/06/01 19:06:41 31STK610 0277 


Break-in Period, Fuel Recommendation


Fuel Recommendation Your vehicle is designed to operate on premium unleaded gasoline with a pump octane of 91 or higher. If this octane grade is unavailable, regular unleaded gasoline with a pump octane of 87 or higher may be used temporarily. The use of regular unleaded gasoline can cause metallic knocking noises in the engine and will result in decreased engine performance. The long-term use of regular-grade gasoline can lead to engine damage.


We recommend using quality gasolines containing detergent additives that help prevent fuel system and engine deposits.


In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend, in areas where it is available, the use of gasoline that does NOT contain manganese-based fuel additives such as MMT.


Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact your authorized dealer for service.


Break-in Period Help assure your vehicle’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period:


Avoid full-throttle starts and rapid acceleration.


Avoid hard braking for the first 200 miles (300 km).


Do not change the oil until the scheduled maintenance time.


Do not tow a trailer.


You should also follow these recommendations with an overhauled or exchanged engine, or when the brakes are replaced.


272


2008 RDX 07/06/01 19:06:50 31STK610 0278 


Fuel Recommendation, Service Station Procedures


Some gasoline today is blended with oxygenates such as ethanol or MTBE. Your vehicle is designed to operate on oxygenated gasoline containing up to 10 % ethanol by volume and up to 15 % MTBE by volume. Do not use gasoline containing methanol.


If your notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.


For further important fuel-related information, please refer to your Quick Start Guide


Refueling


Pull


FUEL FILL DOOR RELEASE HANDLE


1.


Park with the driver’s side closest to the service station pump.


2.


Open the fuel fill door by pulling on the handle at the outside of the driver’s seat.


Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.


Stop the engine, and keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately.


FUEL FILL CAP


TETHER


CONTINUED


273


2008 RDX 07/06/01 19:06:58 31STK610 0279 


Tighten Fuel Cap Message


5.


Screw the fuel fill cap back on until it clicks at least once. If you do not properly tighten the cap, you will see a ‘‘TIGHTEN FUEL CAP’’ message on the multi- information display (see right column on this page), and the malfunction indicator lamp may also come on (see page


382


).


6.


Push the fuel fill door closed until it latches.


If your fuel fill cap is loose or missing, a ‘‘TIGHTEN FUEL CAP’’ message appears on the multi- information display after you start the engine.


Service Station Procedures


3.


4.


Remove the fuel fill cap slowly. You may hear a hissing sound as pressure inside the tank escapes. Place the cap in the holder on the fuel fill door.


Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank. Leave some room for the fuel to expand with temperature changes.


Ifthefuelnozzlekeepsclickingoff even though the tank is not full, there may be a problem with your vehicle’s fuel vapor recovery system. The system helps keep fuel vapor from going into the atmosphere. Try filling at another pump. If this does not fix the problem, consult your dealer.


274


2008 RDX 07/06/01 19:07:06 31STK610 0280 


Opening and Closing the Hood


HOOD RELEASE HANDLE


Turn the engine off, and confirm the fuel fill cap is installed. If it is, loosen it, then retighten it until it clicks at least once. When you can restart the engine, the message appears again. The message goes off after several days of normal driving once you tighten or replace the fuel fill cap. To scroll to another message, press the INFO ( / ) button.


▲ ▼


If the system still detects a leak in your vehicle’s evaporative emissions system, the malfunction indicator lamp (MIL) comes on. If the fuel fill cap was not already tightened, turn the engine off, and check or retighten the fuel fill cap until it clicks at least once. The MIL should go off after several days of normal driving once the cap is tightened or replaced. If the MIL does not go off, have your vehicle inspected by a dealer. For more information, see page


382


1.


Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly.


Service Station Procedures


LATCH


2.


Put your fingers under the front edge of the hood near the center. Slide your hand to the left until you feel the hood latch handle. Push this handle up to release it. Lift up the hood.


If the hood latch handle moves stiffly, or if you can open the hood without lifting the handle, the mechanism should be cleaned and lubricated.


CONTINUED


275


2008 RDX 07/06/01 19:07:14 31STK610 0281 


Service Station Procedures


Oil Check


To close the hood, lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop. Make sure it is securely latched.


DIPSTICK


Park the vehicle on a level surface. Wait a few minutes after turning the engine off before you check the oil.


1.


Remove the dipstick (orange loop).


2.


Wipe off the dipstick with a clean cloth or paper towel.


3.


Hold the dipstick with a clean cloth or paper towel, and then insert it all the way back in its hole.


GRIP


SUPPORT ROD


CLIP


3.


Holding the grip, pull the support rod out of its clip. Insert the end into the designated hole in the hood.


276


2008 RDX 07/06/01 19:07:22 31STK610 0282 


Service Station Procedures


‘‘UP’’MARK


RESERVE TANK


Engine Coolant Check


MAX


UPPER MARK LOWER MARK


MIN


Make sure the ‘‘UP’’ mark on the loop is facing up when you insert the dipstick.


4.


Remove the dipstick again, and check the level. It should be between the upper and lower marks.


Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If Adding it is below the MIN line, see Engine Coolant for 340
information on adding the proper coolant.


on page


If it is near or below the lower mark, see 336


Adding Engine Oil


on page


Owner’s Maintenance on page


Refer to Checks for information about checking other items on your vehicle.


333


277


2008 RDX 07/06/04 18:13:15 31STK610 0283 


Fuel Economy


Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments.


The EPA fuel economy estimates shown in the example to the right are a useful tool for comparison when buying a vehicle. EPA estimates include:



Represents urban


City MPG driving in a vehicle in light traffic. A range of miles per gallon achieved is also provided.



Represents a


Highway MPG mixture of rural and interstate driving, in a warmed-up vehicle, typical of longer trips in free-flowing traffic. A range of miles per gallon


278


City MPG


Highway MPG


Combined Fuel Economy


Estimated Annual Fuel Cost


(Sample U.S. EPA label shown)


achieved is also provided.



Combined Fuel Economy Represents a combination of city and highway driving. The scale represents the range of combined fuel economy for other vehicles in the class.


Estimated Annual Fuel Cost − Provides an estimated annual fuel cost, based on 15,000 miles (20,000
km) per year multiplied by the cost per gallon (based on EPA fuel cost data) divided by the combined fuel economy.


For more information on fuel economy ratings and factors that affect fuel economy, visit fueleconomy.gov vehicles.gc.ca


www. (Canada: Visit


www.


2008 RDX 07/06/01 19:07:45 31STK610 0284 


Fuel Economy


Use the required engine oil (see page


336


).


Maintain proper tire inflation An underinflated tire increases − ‘‘rolling resistance,’’ which reduces fuel economy.


Avoid carrying excess weight in your vehicle It puts a heavier load on the engine, increasing fuel consumption.




Keep your vehicle clean In particular, a build-up of snow or mud on your vehicle’s underside adds weight and rolling resistance. Frequent cleaning helps your fuel economy.


Fuel Economy Factors The following factors can lower your vehicle’s fuel economy:


Aggressive driving (hard acceleration and braking) Excessive idling, accelerating and braking in stop-and-go traffic Cold engine operation (engines are more efficient when warmed up) Driving with a heavy load or the air conditioner running Improperly inflated tires


Improving Fuel Economy


VehicleMaintenance A properly maintained vehicle maximizes fuel economy. Poor maintenance can significantly reduce fuel economy. Always maintain your vehicle according to the maintenance messages displayed on the information display (see Maintenance Checks For example:


Owner’s on page 333


).


DriveEfficiently



Drive moderately acceleration, abrupt cornering, and hard braking increase fuel consumption.


Rapid



Observe the speed limit Aerodynamic drag has a big effect on fuel mileage at speeds above 45
mph (75 km/h). Reduce your speed and you reduce the drag. Trailers, car top carriers, roof racks and bike racks are also big contributors to increased drag.



If your vehicle has a


Always drive in the highest gear possible manual transmission, you can boost your fuel economy by up shifting as early as possible.


Avoid excessive idling − results in 0 miles per gallon.


Idling


CONTINUED


279


2008 RDX 07/06/01 19:07:54 31STK610 0285 


Fuel Economy


CheckingYourFuelEconomy


Miles driven


Gallons of fuel


Miles per


Gallon


100


Liter


Kilometers


L per 100 km


1) 2) 3) 4)


Fill the fuel tank until the nozzle automatically clicks off. Reset trip counter to zero. Record the total gallons (liters) needed to refill. Follow one of the simple calculations above.


Minimize the use of the air conditioning system puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible.


The A/C



Plan and combine trips Combine several short trips into one. A warmed-up engine is more fuel efficient than a cold one.



Calculating Fuel Economy


MeasuringTechniques Direct calculation is the recommended source of information about your actual fuel economy. Using frequency of fill-ups or taking fuel gauge readings are NOT accurate measures of fuel economy. Fuel economy may improve over the first several thousand miles.


280


2008 RDX 07/06/01 19:08:02 31STK610 0286 


Accessories and Modifications


Modifying your vehicle, or installing some non-Acura accessories, can make your vehicle unsafe. Before you make any modifications or add any accessories, be sure to read the following information.


Accessories Your dealer has Acura accessories that allow you to personalize your vehicle. These accessories have been designed and approved for your vehicle, and are covered by warranty.


Although non-Acura accessories may fit on your vehicle, they may not meet factory specifications, and could adversely affect your vehicle’s handling and stability.


Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be hurt or killed.


Follow all instructions in this owner’s manual regarding accessories and modifications.


When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your vehicle’s computer controlled systems, such as your airbags, anti-lock brakes, and tire pressure monitoring system.


Before installing any accessory:


Make sure the accessory does not obscure any lights, or interfere with proper vehicle operation or performance.


Be sure electronic accessories do not overload electrical circuits (see page ) or interfere with proper operation of your vehicle.


386


Before installing any electronic accessory, have the installer contact your dealer for assistance. If possible, have your dealer inspect the final installation.


Do not install accessories on the side pillars or across the rear windows. Accessories installed in these areas may interfere with proper operation of the side curtain airbags.


281


2008 RDX 07/06/01 19:08:10 31STK610 0287 


Accessories and Modifications


Modifying Your Vehicle Removing parts from your vehicle, or replacing components with non- Acura components could seriously affect your vehicle’s handling, stability, and reliability.


Here are some examples:


Lowering the vehicle with a non- Acura suspension kit that significantly reduces ground clearance can allow the undercarriage to hit speed bumps or other raised objects, which could cause the airbags to deploy.


Raising your vehicle with a non- Acura suspension kit can affect the handling and stability.


Non-Acura wheels, because they are a universal design, can cause excessive stress on suspension components and will not be compatible with the tire pressure monitoring system (TPMS).


Larger or smaller wheels and tires can interfere with the operation of your vehicle’s anti-lock brakes and other systems.


Modifying your steering wheel or any other part of your vehicle’s safety features can make the systems ineffective.


If you plan to modify your vehicle, consult your dealer.


282


2008 RDX 07/06/01 19:08:19 31STK610 0288 


DOOR LINING POCKETS


FRONT DOOR POCKET


CENTER POCKET


CARGO AREA


GLOVE BOX


CONSOLE COMPARTMENT


Carrying Cargo


Your vehicle has several convenient storage areas:


Glove box Front door pockets Door lining pockets Center pocket Console compartment Cargo area, including the rear seats when folded down. Roof-rack (if equipped)


However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.


283


2008 RDX 07/06/04 16:06:07 31STK610 0289 


Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.


Follow all load limits and other loading guidelines in this manual.


Carrying Cargo


Load Limits The maximum load for your vehicle is 870 lbs for U.S. vehicles, and 395
kg for Canadian vehicles.


See Tire And Loading Information label attached to the driver’s doorjamb.


Label Example


This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.


284



Steps for Determining Correct Load Limit (1)


Locate the statement ‘‘The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.’’ on your vehicle’s placard.


(2)


Determine the combined weight of the driver and passengers that will be riding in your vehicle.


(3)


Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.


(4)


The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the ‘‘XXX’’ amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400


150) = 650 lbs.)


750 (5



×


2008 RDX 07/06/04 16:06:19 31STK610 0290 


Carrying Cargo


(5)


Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.


(6)


If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.


Example 1


Example 2


Example 3


Max Load (870 lbs)


Passenger Weight (150 lbs x 2 = 300 lbs)


Cargo Weight (570 lbs)


Max Load (870 lbs)


Passenger Weight (150 lbs x 4 = 600 lbs)


Cargo Weight (270 lbs)


Max Load (870 lbs)


Passenger Weight (150 lbs x 5 = 750 lbs)


Cargo Weight (120 lbs)


In addition, the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver’s doorjamb.


285


2008 RDX 07/06/01 19:08:51 31STK610 0291 


Carrying Cargo in the Cargo Area or on a Roof Rack


Distribute cargo evenly on the floor of the cargo area, placing the heaviest items on the bottom and as far forward as possible. Tie down items that could be thrown about the vehicle during a crash or sudden stop.


If you fold the rear seats down, tie down items that could be thrown about the vehicle during a crash or sudden stop. Also, keep all cargo below the bottom of the windows. If it is higher, it could interfere with the proper operation of the side curtain airbags.


Carrying Cargo


Carrying Cargo in the Passenger Compartment


Store or secure all items that could be thrown around and hurt someone during a crash.


Be sure items placed on the floor behind the front seats cannot roll underneath and interfere with the proper operation of the seats, the sensors under the seats, or the driver’s ability to operate the pedals.


Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.


Do not put any items on top of the cargo area cover. They can block your view and be thrown around the vehicle during a crash.


286


If you carry large items that prevent you from closing the tailgate, exhaust gas can enter the passenger area. To avoid the possibility of poisoning on page 56


, follow the instructions


carbon monoxide


If you carry any items on a roof rack, be sure the total weight of the rack and the items does not exceed the maximum allowable weight. Please contact your dealer for further information.


If you carry any items on a roof rack, be sure the total weight of the rack and the items does not exceed 110 lbs (50 kg).


If you use an accessory roof rack, the roof rack weight limit may be lower. Refer to the information that came with your roof rack.


2008 RDX 07/06/01 19:08:57 31STK610 0292 


Cargo Hooks/Hanger Bars


The hanger bars can be used to hang items. The hanger bar is designed to hang light items (maximum load: 11
lbs or 5 kg on each side). Heavy items may damage the bars.


HANGER BARS


HOOK


To secure the cargo, you can use the four cargo hooks on the cargo area. The illustration shows the location of each cargo hook.


The cargo hooks on the floor can be used to install the cargo net for securing items.


Carrying Cargo

Loading...
x