2014 Toyota Prius V Owners Manual

2-1. Driving procedures

CAUTION

●Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in

the vehicle when it is in the sun. Doing so may result in the following: • Gas may leak from a cigarette lighter or spray can, and may lead to a

fire.

• The temperature inside the vehicle may cause the plastic lenses and

plastic material of glasses to deform or crack.

• Soft drink cans may fracture, causing the contents to spray over the interior of the vehicle, and may also cause a short circuit in the vehi- cle’s electrical components.

●Do not leave cigarette lighters in the vehicle. If a cigarette lighter is in a place such as the glove box or on the floor, it may be lit accidentally when luggage is loaded or the seat is adjusted, causing a fire.

●Do not attach adhesive discs to the windshield or windows. Do not place containers such as air fresheners on the instrument panel or dashboard. Adhesive discs or containers may act as lenses, causing a fire in the vehi- cle.

●Do not leave a door or window open if the curved glass is coated with a metallized film such as a silver-colored one. Reflected sunlight may cause the glass to act as a lens, causing a fire.

●Do not touch the exhaust pipe while the hybrid system is operating or

immediately after turning the hybrid system off. Doing so may cause burns.

●Do not leave the hybrid system operating in an area with snow build-up, or where it is snowing. If snowbanks build up around the vehicle while the hybrid system is operating, exhaust gases may collect and enter the vehi- cle. This may lead to death or a serious health hazard.

171

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

CAUTION

■Exhaust gases

Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Inhaling exhaust gases may lead to death or a serious health hazard. ●If the vehicle is in a poorly ventilated area, stop the hybrid system. In a closed area, such as a garage, exhaust gases may collect and enter the vehicle. This may lead to death or a serious health hazard.

●The exhaust system should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard. ■When taking a nap in the vehicle

Always turn the hybrid system off. Otherwise, if you accidentally move the shift lever or depress the accelerator pedal, this could cause an accident or fire due to hybrid system overheating. Additionally, if the vehicle is parked in a poorly ventilated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.

■When braking

●When the brakes are wet, drive more cautiously.

Braking distance increases when the brakes are wet, and this may cause one side of the vehicle to brake differently than the other side. Also, the parking brake may not securely hold the vehicle.

●If the electronically controlled assist function does not operate, do not fol- low other vehicles closely and avoid downhill or sharp turns that require braking. In this case, braking is still possible, but the brake pedal should be depressed more firmly than usual. Also, the braking distance will increase. Have your brakes fixed immediately.

●The brake system consists of 2 or more individual hydraulic systems; if one of the systems fails, the other(s) will still operate. In this case, the brake pedal should be depressed more firmly than usual and the braking distance will increase. Have your brakes fixed immediately.

172

PRIUS v_OM_OM47840U_(U)

2

2-1. Driving procedures

NOTICE

■When driving the vehicle

●Do not depress the accelerator and brake pedals at the same time during

driving, as this may restrain driving torque.

●Do not use the accelerator pedal or depress the accelerator and brake

pedals at the same time to hold the vehicle on a hill.

■Avoiding damage to vehicle parts

●Do not turn the steering wheel fully in either direction and hold it there for

an extended period of time. Doing so may damage the power steering motor.

●When driving over bumps in the road, drive as slowly as possible to avoid

damaging the wheels, underside of the vehicle, etc.

■If you get a flat tire while driving

A flat or damaged tire may cause the following situations. Hold the steering wheel firmly and gradually depress the brake pedal to slow down the vehicle. ●It may be difficult to control your vehicle. ●The vehicle will make abnormal sounds or vibrations. ●The vehicle will lean abnormally. Information on what to do in case of a flat tire. (P. 462)

173

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

NOTICE

■When encountering flooded roads

Do not drive on a road that has flooded after heavy rain etc. Doing so may cause the following serious damage to the vehicle: ●Engine stalling ●Short in electrical components ●Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ●Brake function ●Changes in quantity and quality of engine oil, transmission fluid for the

hybrid system, etc.

●Lubricant condition for the bearings and suspension joints (where possi-

ble), and the function of all joints, bearings, etc.

If the P position control system is damaged by flooding, it may not be possi- ble to shift the shift position to P, or from P to other positions. When the shift position cannot be changed from P to any other position, the front wheels will lock, and you will be unable to tow the vehicle with the front wheels on the ground, as the front wheels may be locked. In this case, transport the vehicle with both front wheels or all four wheels lifted.

174

PRIUS v_OM_OM47840U_(U)

2

2-1. Driving procedures Power (ignition) switch

Performing the following operations when carrying the electronic key on your person starts the hybrid system or changes “POWER” switch modes. ■ Starting the hybrid system

STEP 1

STEP 2

Check that the parking brake is set. Firmly depress the brake pedal. Check that the “POWER” switch indicator turns green. If the indi- cator does not turn green, the hybrid system cannot be started. When the shift position is N, the hybrid system cannot start. Shift the shift position to P when starting the hybrid system. (P. 188)

STEP 3

Press the “POWER” switch.

The hybrid system can be started from any “POWER” switch mode. Continue depressing the brake pedal until the hybrid system is completely started.

175

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

STEP 4

Check that the “READY” indicator is on. If the “READY” indicator changes from a flashing light to a solid light and the buzzer sounds, the hybrid system is starting nor- mally. The vehicle will not move when the “READY” indicator is off. The vehicle can move when the “READY” indicator is on even if the engine is stopped. (The gasoline engine starts or stops auto- matically in accordance with the state of the vehicle.)

■ Stopping the hybrid system

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

Stop the vehicle completely. Set the parking brake. (P. 195) Shift the shift position to P. (P. 188) Check that the shift position indicator shows P. (P. 185) Press the “POWER” switch. The hybrid system will stop. Slowly release the brake pedal and check that the indicator on the “POWER” switch is off.

176

PRIUS v_OM_OM47840U_(U)

2

2-1. Driving procedures

■ Changing “POWER” switch modes Modes can be changed by pressing the “POWER” switch with the brake pedal released. (The mode changes each time the switch is pressed.)

Off The emergency flashers can be used. ACCESSORY mode Some electrical components such as the audio system can be used. The “POWER” switch indicator turns amber. ON mode All electrical components can be used. The “POWER” switch indicator turns amber.

177

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

■Auto power off function

If the vehicle is left in ACCESSORY mode for more than 20 minutes or ON mode (the hybrid system is not operating) for more than an hour with the shift position in P, the “POWER” switch will automatically turn off. However, this function cannot entirely prevent the 12-volt battery from discharging. Do not leave the vehicle with the “POWER” switch in ACCESSORY or ON mode for long periods of time when the hybrid system is not operating.

■Sounds and vibrations specific to a hybrid vehicle

P. 34

■Electronic key battery depletion

P. 69

■When the ambient temperature is low, such as during winter driving

conditions The “READY” indicator may flash for a long time when the hybrid system is starting. Driving will become possible once the “READY” indicator has illumi- nated. Wait until the “READY” indicator has illuminated.

■Conditions affecting operation

P. 65

■Notes for the entry function

P. 66

■If the hybrid system does not start

The immobilizer system may not have been deactivated. (P. 119)

178

PRIUS v_OM_OM47840U_(U)

2

2-1. Driving procedures

■When the “POWER” switch indicator flashes in amber

The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately.

■If the “READY” indicator does not come on

If the “READY” indicator does not come on when you press the “POWER” switch with the shift position in P and the brake pedal depressed, contact your Toyota dealer immediately.

■If the hybrid system is malfunctioning

P. 445

■If the electronic key battery is depleted

P. 407

■Operation of the “POWER” switch

●When operating the “POWER” switch, one short, firm press is enough. If the switch is pressed improperly, the hybrid system may not start or the “POWER” switch mode may not change. It is not necessary to press and hold the switch.

●If attempting to restart the hybrid system immediately after turning the “POWER” switch off, the hybrid system may not start in some cases. After turning the “POWER” switch off, please wait a few seconds before restarting the hybrid system.

■Automatically P position selection function

P. 190

179

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

■When the P position control system malfunctions

The “POWER” switch will not be able to be turned off. In such a case, the switch can be turned off after applying the parking brake. Have the vehicle inspected by your Toyota dealer immediately.

■Meter display

When the “POWER” switch is turned off, each display will extinguish as fol- lows. ●The shift position indicator will extinguish after approximately 2 seconds. ●The odometer, clock, etc. will extinguish after approximately 30 seconds. (Each display will also extinguish immediately if a door is locked before 30
seconds has elapsed)

CAUTION

■When starting the hybrid system

Always start the hybrid system while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the hybrid system under any cir- cumstances. Doing so may cause an accident resulting in death or serious injury.

■Stopping the hybrid system in an emergency

If you want to stop the hybrid system in an emergency while driving the vehi- cle, press and hold the “POWER” switch for more than 2 seconds, or press it briefly 3 times or more in succession. However, do not touch the “POWER” switch while driving except in an emer- gency. Turning the hybrid system off while driving will not cause loss of steering or braking control, however, power assist to the steering will be lost. This will make it more difficult to steer smoothly, so you should pull over and stop the vehicle as soon as it is safe to do so.

180

PRIUS v_OM_OM47840U_(U)

2

2-1. Driving procedures

NOTICE

■To prevent 12-volt battery discharge

●Do not leave the “POWER” switch in ACCESSORY or ON mode for long

periods of time without the hybrid system on.

●If the hybrid system is off, but the indicator on the “POWER” switch is illu- minated, this indicates that the “POWER” switch is still turned on. When exiting the vehicle, always check that the “POWER” switch is off. ■Symptoms indicating a malfunction with the “POWER” switch

If the “POWER” switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction. Con- tact your Toyota dealer immediately.

181

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures EV drive mode

In EV drive mode, the electric motor (traction motor), powered by the hybrid battery (traction battery), is used to drive the vehicle. This mode allows you to drive in residential areas late at night, or in indoor parking lots etc. without concern for noises and exhaust gas emissions.

Turns EV drive mode on/off

When EV drive mode is turned on, the EV drive mode indica- tor will come on. Pressing the switch when in EV drive mode will return the vehicle to normal driving (using the gasoline engine and elec- tric motor [traction motor]).

182

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

■Situations in which EV drive mode cannot be turned on It may not be possible to turn EV drive mode on in the following situations.* If it cannot be turned on, a buzzer will sound to inform the driver. ●The temperature of the hybrid system is high.

The vehicle has been left in the sun, driven on a hill, driven at high speeds, etc.

●The temperature of the hybrid system is low.

The vehicle has been left in temperatures lower than about 32 F (0 C) for a long period of time etc.

●The gasoline engine is warming up. ●The hybrid battery (traction battery) is low.

When the amount of remaining hybrid battery (traction battery) charge displayed on the meter is low. (P. 197)

●Vehicle speed is high. ●The accelerator pedal is depressed firmly or the vehicle is on a hill etc. ●The windshield defogger is in use. *: Depending on the circumstances, EV drive mode may also not be

switched to in situations other than those above.

■Switching to EV drive mode when the gasoline engine is cold

If the hybrid system is started while the gasoline engine is cold, the gasoline engine will start automatically after a short period of time in order to warm up. In this case, you will become unable to switch to EV drive mode. After the hybrid system has started and the “READY” indicator has illumi- nated, press the EV drive mode switch before the gasoline engine starts to switch to EV drive mode.

183

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

■Automatic cancelation of EV drive mode

When driving in EV drive mode, the gasoline engine may automatically restart in the following situations. When EV drive mode is canceled, a buzzer will sound and the EV drive mode indicator will flash and go off. ●The hybrid battery (traction battery) becomes low. ●Vehicle speed becomes high. ●The accelerator pedal is depressed firmly or the vehicle is on a hill etc.

■Possible driving distance when driving in EV drive mode

In EV drive mode, it is possible to drive up to about 1.3 mile (2 km) if driving at a speed of about 25 mph (40 km/h) or less. (The distance that is possible depends on the hybrid battery [traction battery] level and driving conditions.)

■Changing a driving mode when in EV drive mode

EV drive mode can be used in conjunction with Eco drive mode and power mode. However, EV drive mode may be automatically canceled when used in con- junction with power mode.

■Fuel economy

PRIUS v is designed to achieve the best possible fuel economy during nor- mal driving (using the gasoline engine and electric motor [traction motor]). Driving in EV drive mode more than necessary may lower fuel economy.

CAUTION

■While driving

When driving in EV drive mode, pay special attention to the area around the vehicle. Because there is no engine noise, pedestrians, people riding bicy- cles or other people and vehicles in the area may not be aware of the vehicle starting off or approaching them, so take extra care while driving.

184

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures Hybrid transmission

Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever

Shift lever Operate the shift lever gently and ensure correct shifting operation.

When shifting to the D or R positions, move the shift lever along the shift gate. To shift to the N position, slide the shift lever to the left and hold it. The shift position will change to N. Shifting to B is only possible when shift position D is selected.

The shift lever will always return to this original position after a shifting operation.

When shifting from P to N, D or R, from D to R, or from R to D, ensure that the brake pedal is being depressed and the vehicle is stationary.

185

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

Shift position indicator The position of the frame on the shift position indicator changes in accordance with the current shift position. When any shift position other than D or B is selected, the arrow toward B and B position indicator disappears from the shift position indicator.

When selecting the shift position, make sure that the shift position has been changed to the desired position by checking the shift position indica- tor provided on the instrument cluster. ■ Shift position purpose

Shift position

Function

Parking the vehicle/starting the hybrid system

Reversing Neutral

Normal driving*

Applying moderate engine braking when driving

down hills or on steep slopes

*: For good fuel economy and noise reduction, the D position should usu-

ally be used.

186

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

■ Selecting a driving mode

The following modes can be selected to suit driving conditions:

Eco drive mode The torque generated in response to accelerator pedal depres- sion will lessen compared to normal, and air conditioning opera- tion (heating/cooling) will be restrained, thus suiting driving with improved fuel efficiency. When the “ECO MODE” switch is pressed, the “ECO MODE” indicator comes on. Power mode Use when high levels of response and feeling are desirable, such as when driving in mountainous regions or when overtak- ing. When the power mode switch is pressed, the power mode indicator comes on.

187

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

P position switch

■ When shifting the shift position to P

Fully stop the vehicle and set the parking brake, and then press the P position switch.

the shift position

When is changed to P, the switch indicator comes on. Check that the P position is illumi- nated on the shift position indica- tor.

■ Shifting the shift position from P to other positions

● While depressing the brake pedal firmly, operate the shift lever. If the shift lever is operated without depressing the brake pedal, the buzzer will sound and the shifting operation will be disabled. ● When selecting the shift position, make sure that the shift posi- tion has been changed to the desired position by checking the shift position indicator provided on the instrument cluster. ● The shift position cannot be changed from P to B directly.

188

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

■Operation of the air conditioning system in Eco drive mode

Eco drive mode controls the heating/cooling operations and fan speed of the air conditioning system to enhance fuel efficiency. (P. 187) To improve air conditioning performance, adjust the fan speed or turn off Eco drive mode.

■For the shift positions

●When the “POWER” switch is off, the shift position cannot be changed. ●When the “POWER” switch is in ON mode (the hybrid system is not oper- ating), the shift position can only be changed to N. The shift position will be changed to N even if the shift lever is shifted to D or R and held in that position.

●When the “READY” indicator is on, the shift position can be changed

from P to D, N or R.

●When the “READY” indicator is flashing, the shift position cannot be changed from P to other position even if the shift lever is operated. Wait until the “READY” indicator changes from a flashing to a solid light, and then operate the shift lever again.

●The shift position can only be changed to B directly from D. In addition, if an attempt is made to change the shift position by moving the shift lever or by pressing the P position switch in any of the following situa- tions, the buzzer will sound and the shifting operation will be disabled or the shift position will automatically change to N. When this happens, select an appropriate shift position. ●Situations where the shifting operation will be disabled:

• When an attempt is made to change the shift position from P to other

position by moving the shift lever without depressing the brake pedal.

• When an attempt is made to change the shift position from P or N to B

by moving the shift lever.

189

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

●Situations where the shift position will automatically change to N: • When the P position switch is pressed while the vehicle is running.*1
• When an attempt is made to select the R position by moving the shift lever when the vehicle is moving forward.*2
• When an attempt is made to select the D position by moving the shift lever when the vehicle is moving in reverse.*3
• When an attempt is made to change the shift position from R to B by *1: Shift position may be changed to P when driving at extremely low

moving the shift lever.

speeds.

*2: Shift position may be changed to R when driving at low speeds. *3: Shift position may be changed to D when driving at low speeds. ■Reverse warning buzzer

When shifting into R, a buzzer will sound to inform the driver that the shift position is in R.

■When the accelerator pedal is depressed while the shift position is in N

A buzzer will sound to inform the driver that the shift position is in N.

■Automatically P position selection function

When the shift position is in a position other than P, pressing the “POWER” switch with the vehicle stopped completely will cause the shift position to change to P automatically, and then the “POWER” switch will turn off.

■If the shift position cannot be shifted from P

There is a possibility that the 12-volt battery is discharged. Check the 12-volt battery in this situation. (P. 481)

190

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

■About engine braking

When shift position B is selected, releasing the accelerator pedal will apply engine braking. ●When the vehicle is driven at high speeds, compared to ordinary gaso- line-fueled vehicles, the engine braking deceleration is felt less than that of other vehicles.

●The vehicle can be accelerated even when shift position B is selected. If the vehicle is driven continuously in the B position, fuel efficiency will become low. Usually, shift the shift position to D. ■When canceling Eco drive mode/power mode

●Press the switch again. Also, power mode will be canceled automatically when the “POWER” switch is turned off. However, Eco drive mode will not be canceled automatically until the switch is pressed, even if the “POWER” switch is turned off.

●When in Eco drive mode, if the power mode switch is pressed or the operation is reversed, the mode will switch to that of the last switch to be pressed.

■Switching the drive mode when in EV drive mode

P. 184

■After recharging/reconnecting the 12-volt battery

P. 386

■Customization

Settings (e.g. Reverse warning buzzer) can be changed. (Customizable features P. 525)

191

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures

CAUTION

■When driving on slippery road surfaces

Do not accelerate or shift the shift position suddenly. Sudden changes in engine braking may cause the vehicle to spin or skid, resulting in an accident.

■For the shift lever

Do not remove the shift lever knob or use anything but a genuine Toyota shift lever knob. Also, do not hang anything on the shift lever. Doing so could prevent the shift lever from returning to position, causing unexpected accidents to occur when the vehicle is in motion.

■P position switch

Do not press the P position switch while the vehicle is moving. If the P position switch is pressed when driving at very low speeds (for example, directly before stopping the vehicle), the vehicle may stop sud- denly when the shift position switches to P, which could lead to an accident.

192

PRIUS v_OM_OM47840U_(U)

2

2-1. Driving procedures

NOTICE

■Hybrid battery (traction battery) charge

If the shift position is in N, the hybrid battery (traction battery) will not be charged. To help prevent the battery from discharging, avoid leaving the N position selected for an extended period of time.

■Situations where P position control system malfunctions are possible If any of the following situations occurs, P position control system malfunc- tions are possible. Immediately stop the vehicle in a safe place on level ground, apply the park- ing brake, and then contact your Toyota dealer. ●When the “P LOCK MALFUNCTION WHEN PARKING, PARK IN FLAT PLACE AND APPLY PARKING BRAKE SECURELY” warning message appears on the instrument cluster. (P. 448)

●When the parking lock system warning light is illuminated. ●When everything except the shift position indicator selection frame is illu-

minated.

●When the shift position indicator remains off.

■Notes regarding shift lever and P position switch operation

Avoid repeatedly operating the shift lever and P position switch in quick suc- cession. The system protection function may activate and it will not be temporarily possible to shift the shift position other than P. If this happens, please wait for a while before attempting to change the shift position again.

193

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures Turn signal lever

The turn signal lever can be used to show the following intention of the driver:

Right turn Left turn Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever. Lane change left (push and hold the lever partway) The left hand signals will flash until you release the lever.

the

to

■Turn signals can be operated when The “POWER” switch is in ON mode.

■If the indicator flashes faster than usual

Check that a light bulb in the front or rear turn signal lights has not burned out.

194

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures Parking brake

U.S.A.

Canada

To set the parking brake, fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot. (Depressing the pedal again releases the parking brake.)

■Parking brake engaged warning buzzer

P. 444

■Usage in winter time

See “Winter driving tips” for parking brake usage in winter time. (P. 271)

NOTICE

■Before driving

Fully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear.

195

PRIUS v_OM_OM47840U_(U)

2-1. Driving procedures Horn

To sound the horn, press on or close to the

mark.

■After adjusting the steering wheel

Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (P. 107)

196

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster Gauges and meters

The units used on the trip information display etc. may differ depending on the target region. The following gauges and meters and display illuminate when the “POWER” switch is in ON mode:

Hybrid System Indicator Hybrid System Indicator represents the hybrid system power output and regenerative charging. Speedometer Displays the vehicle speed. Shift position indicators Displays the shift position. Fuel gauge Displays the quantity of fuel remaining in the tank. Hybrid battery (traction battery) status The amount of charge remaining in the hybrid battery (traction battery) is shown by 8 bars.

197

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

Trip information display Displays fuel consumption, driving range, etc. Odometer and trip meter display Odometer: Displays the total distance that the vehicle has been

driven.

Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different dis- tances independently.

Clock P. 314

198

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

MPH or km/h button

The speed units can be selected MPH or km/h.

Press the button to switch the display between MPH and km/h.

Instrument panel light control

The brightness of the instrument panel lights can be adjusted by turn- ing the dial.

Brighter Darker When is turned to ON, the brightness will be reduced slightly unless the control dial is turned fully up.

the headlight switch

199

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

Changing the display

Switches between odometer and trip meter displays. When the trip meter is displayed, pressing and holding the “TRIP” button will reset the trip meter.

When you reset the trip meter, the average fuel consumption will be reset as well. (P. 201)

Switching the trip information display

Items displayed can be switched by pressing the “DISP” button.

200

PRIUS v_OM_OM47840U_(U)

2

2-2. Instrument cluster

Trip information display

■ Current fuel consumption

Displays the instant fuel consumption.

■ Average fuel consumption

The average fuel consumption is displayed on both the odometer and the trip meter. • While the odometer is being displayed, or when the odometer/trip meter are not being displayed, the average fuel consumption from the last reset will be displayed.

• While the trip meter is being displayed, the average fuel consumption will be displayed in accordance with the trip meter distance from the last reset.

• The function can be reset by pressing the “DISP” button for longer than 1 second when the average fuel consumption is displayed on the odometer.

• The function can be reset by pressing the “TRIP” button for longer than 1 second when the average fuel consumption is displayed on the trip meter.

• Use the displayed average fuel consumption

as a reference.

201

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

■ Cruising range

■ “SET” screen

Displays the estimated maximum distance that can be driven with the quantity of fuel remain- ing. • This distance is computed based on your

average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.

• When only a small amount of fuel is added to

the tank, the display may not be updated. When refueling, turn the “POWER” switch off. If the vehicle is refueled without turning the “POWER” switch off, the display may not be updated.

The items displayed on Hybrid System Indica- tor can be setup. (P. 205)

202

PRIUS v_OM_OM47840U_(U)

2

2-2. Instrument cluster

Hybrid System Indicator

Hybrid System Indicator displays the hybrid system operating condi- tion and provides Eco-friendly driving assistance in accordance with the driving conditions and the acceleration. ■ Names and meaning of each icons

Eco Driving Indicator Light Turns on when the vehicle is driven in Eco-friendly. Hybrid System Indicator Refer to “Reading Hybrid System Indicator” below. EV indicator The EV indicator comes on when the vehicle is driven using only the electric motor (traction motor) or the gasoline engine is stopped.

■ Reading Hybrid System Indicator

As shown below, the driving conditions of the vehicle can be con- firmed by checking the status of the indicator.

Charge area Eco area Hybrid Eco area Power area

203

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

As shown below, the driving conditions of the vehicle can be con- firmed by checking the status of the indicator.

Hybrid System Indicator status

Display*1

Charge area: Shows regenerative charging.*2 (P. 31)

Eco area: Shows that the vehicle is driven in Eco-friendly.

Hybrid Eco area: Shows that gasoline engine power is not being used very often.*3

Power area: Shows that the driving power is more than the upper limit of Eco driving (during full power driv- ing etc.). *1: The images are examples only, and may vary slightly from actual condi-

tions.

*2: The displayed status is intended as a guide, and may differ from the

actual status.

*3: The gasoline engine will automatically stop and restart under various

conditions.

204

PRIUS v_OM_OM47840U_(U)

2

2-2. Instrument cluster

Changing Hybrid System Indicator settings

The items displayed on Hybrid System Indicator can be changed by operating the “DISP” button. Stop the vehicle in a place in which the operation can be safely carried out, apply the parking brake, and shift the shift position to P.

STEP 1

STEP 2

After pressing the “DISP” button to display the “SET” screen on the trip information display, press and hold the “DISP” button for 1
second or more.

The “SET” display and Hybrid System Indicator will flash.

Press the “DISP” button while the display is flashing to select the items to be displayed. The display items will flash.

Display all Display Hybrid System Indica- tor and EV indicator Display Hybrid System Indica- tor only Display none Display Eco Driving Indicator Light only

205

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

STEP 3

Press and hold the “DISP” button for 1 second or more to complete the setup. If setup is not completed by pressing and holding the “DISP” button for 1 second or more, or if nothing is operated within approximately 10 seconds, the screen will return and the settings will be lost.

■Eco Driving Indicator Light

Eco Driving Indicator Light will turn on when driving power is lower than the upper limit of Eco driving. It will turn off when the acceleration exceeds the Eco driving accelerator upper limit or when the vehicle is stopped. Eco Driving Indicator Light will not operate in the following conditions: ●The shift position is anything other than D. ●The driving mode is set to power mode or EV drive mode. (P. 182, 187) ●The vehicle speed is approximately 80 mph (130 km/h) or higher. Eco Driving Indicator Light can be set to activated or deactivated. (P. 205)

■Remaining hybrid battery (traction battery) charge display

The charge amount of the hybrid battery (traction battery) is automatically controlled by the hybrid system. For this reason, even if electricity is recov- ered via the regenerative braking, or electricity is generated via the gasoline engine, the displayed hybrid battery (traction battery) charge amount may not reach the highest level (level 8). However, this does not indicate a mal- function.

206

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

■Engine speed

On hybrid vehicles, engine speed is precisely controlled in order to help improve fuel efficiency and reduce exhaust emissions etc. There are times when the engine speed that is displayed may differ even when vehicle operation and driving conditions are the same.

■Brightness of the instrument panel light

If the headlight switch is turned to ON while the surrounding area is dark, the instrument panel lights will dim.

■When disconnecting and reconnecting 12-volt battery terminals

The average fuel consumption and cruising range will be reset.

NOTICE

■To prevent damage to the engine and its components

The engine may be overheating if the high coolant temperature warning light comes on or flashes. In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (P. 487)

■The trip information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed.

207

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster Indicators and warning lights

The indicator and warning lights on the instrument cluster inform the driver of the status of the vehicle’s various systems. Instrument cluster

Some indicators and the units used on the trip information display etc. may differ depending on the target region. Center panel

208

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

■ Indicators

The indicators inform the driver of the operating state of the vehicle’s various systems.

*1

Eco Driving Indicator Light (P. 203)

“ECO MODE” indicator (P. 187)

Power mode indicator (P. 187)

Cruise control indicator (P. 229, 233)

Radar cruise control indicator (P. 233)

(if equipped) (green)

(if equipped) (green)

“SET” indicator (P. 229, 233)

Slip indicator (P. 251, 254)

*1, 2

209

(U.S.A.)

(Canada)

Turn signal indicator (P. 194)

Headlight indicator (P. 213)

Tail light indicator (P. 213)

Headlight high beam indicator (P. 216)

Front fog light indicator (P. 219)

Security indicator (P. 119)

“READY” indicator (P. 175)

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

EV indicator (P. 203)

EV drive mode indica- tor (P. 182)

Shift position indicators (P. 185)

*1, 3

(if equipped)

“PCS” warning (P. 257)

SRS airbag on-off indicator (P. 138)

*1: These lights turn on when the “POWER” switch is turned to the ON mode to indicate that a system check is being performed. They will turn off after the hybrid system is on, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.

*2: The light flashes to indicate that the system is operating. *3: The light comes on when the system is turned off. The light flashes

faster than usual to indicate that the system is operating.

210

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

■ Warning lights

Warning lights inform the driver of malfunctions in any of the vehicle’s systems. (P. 444)

*1

*1

*1

*1

*1

*1

(Canada)

(U.S.A.) *1

*1

*1

*1

*1

*1

*1

(U.S.A.) *1

(Canada) (red) *1

(yellow) *1

(if equipped) (if equipped) *1, 2

*1

*1

*1

*1

(if equipped)

(if equipped)

(yellow)

(if equipped)

(yellow)

(U.S.A.)

(Canada) *1

(U.S.A.)

(U.S.A.)

(Canada)

*1: These lights turn on when the “POWER” switch is turned to ON mode to indicate that a system check is being performed. They will turn off after the hybrid system is on, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.

*2: The light flashes to indicate a malfunction.

211

PRIUS v_OM_OM47840U_(U)

2-2. Instrument cluster

CAUTION

■If a safety system warning light does not come on

Should a safety system light such as the ABS and SRS airbag warning light not come on when you start the hybrid system, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs.

212

PRIUS v_OM_OM47840U_(U)

2

2-3. Operating the lights and windshield wipers Headlight switch

The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: U.S.A. (type A)

The daytime running lights turn on. The side marker, parking, tail, license plate, daytime run- ning lights and instru- ment panel lights turn on. The headlights and all the lights listed above (except day- time running lights) turn on. The daytime running lights turn off.

213

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers

U.S.A. (type B)

The headlights, park- ing lights, daytime running lights and so on turn on and off automatically (when the “POWER” switch is in ON mode). The side marker, parking, tail, license plate, daytime run- ning lights and instru- ment panel lights turn on. The headlights and all the lights listed above (except day- time running lights) turn on. The daytime running lights turn off.

214

PRIUS v_OM_OM47840U_(U)

2

2-3. Operating the lights and windshield wipers

Canada

The daytime running lights turn on. The side marker, parking, tail, license plate, daytime run- ning lights and instru- ment panel lights turn on. The headlights and all the lights listed above (except day- time running lights) turn on. The headlights, park- ing lights, daytime running lights and so on turn on and off automatically (when the “POWER” switch is in ON mode).

(if equipped)

215

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers

Turning on the high beam headlights

With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off. Pull the lever toward you and release it to flash the high beams once. You can flash the high beams with the headlights on or off.

■Daytime running light system

●To make your vehicle more visible to other drivers, the daytime running lights turn on automatically (at a reduced intensity) whenever the hybrid system is started and the parking brake is released. Daytime running lights are not designed for use at night. For the U.S.A.: Daytime running lights can be turned off by operating the switch.

●Compared to turning on the headlights, the daytime running light system offers greater durability and consumes less electricity, so it can help improve fuel economy.

216

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers

■Headlight control sensor (if equipped)

The sensor may not function properly if an object is placed on the sensor, or any- thing that blocks the sensor is affixed to the windshield. Doing so the sensor detecting the level of ambient light and may cause the automatic headlight sys- tem to malfunction. Air conditioning operation may also be interrupted.

interferes with

■Automatic light off system

●When the headlights come on: The headlights and tail lights turn off 30
seconds after a door is opened and closed if the “POWER” switch is turned to ACCESSORY mode or turned off. (The lights turn off immedi- ately if

on the key is pressed after all the doors are locked.)

●When only the tail lights come on: The tail lights turn off automatically if the “POWER” switch is turned to ACCESSORY mode or turned off and the driver’s door is opened.

To turn the lights on again, turn the “POWER” switch to ON mode, or turn the light switch off once and then back to

or

217

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers

■Automatic headlight leveling system (if equipped)

The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users.

■Customization

Settings (e.g. light sensor sensitivity) can be changed. (Customizable features P. 525)

NOTICE

■To prevent 12-volt battery discharge

Do not leave the lights on longer than necessary when the hybrid system is off.

218

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers Fog light switch

The fog lights secure excellent visibility in difficult driving condi- tions, such as in rain and fog. Type A

Turns the fog lights off Turns the fog lights on

: If equipped 219

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers

Type B

Turns the fog lights off Turns the fog lights on

■Fog lights can be used when

The headlights are on in low beam.

NOTICE

■To prevent 12-volt battery discharge

Do not leave the lights on longer than necessary when the hybrid system is off.

220

PRIUS v_OM_OM47840U_(U)

2

2-3. Operating the lights and windshield wipers Windshield wipers and washer

When intermittent windshield wiper operation is selected, wiper intervals can be also adjusted. The wiper operation is selected by moving the lever as follows. Type A

wind- Intermittent shield wiper opera- tion Low speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation

221

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers

the

Increases intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency

Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. If the headlights are on, the headlight cleaner will operate once.

222

PRIUS v_OM_OM47840U_(U)

2

2-3. Operating the lights and windshield wipers

Type B

Intermittent wind- shield wiper opera- tion Low speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation

223

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers

the

Increases intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency

Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. If the headlights are on, the headlight cleaner will operate once.

■The windshield wipers and washer can be operated when

The “POWER” switch is in ON mode.

■If no windshield washer fluid sprays

Check that the washer nozzles are not blocked if there is washer fluid in the washer fluid tank.

224

PRIUS v_OM_OM47840U_(U)

2

2-3. Operating the lights and windshield wipers

NOTICE

■When the windshield is dry

Do not use the wipers, as they may damage the windshield.

■When the washer fluid tank is empty

Do not operate the switch continually as the washer fluid pump may over- heat.

■When a nozzle becomes blocked

In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.

■To prevent 12-volt battery discharge

Do not leave the wipers on longer than necessary when the hybrid system is off.

225

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers Rear window wiper and washer

Turning the end of the lever turns on the rear window wiper and washer as follows: Type A

Intermittent window wiper operation Normal window wiper operation Washer/wiper operation Washer/wiper operation

dual

dual

226

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers

Type B

Intermittent window wiper operation Normal window wiper operation Washer/wiper operation Washer/wiper operation

dual

dual

■The rear window wiper and washer can be operated when

The “POWER” switch is in ON mode.

■If no washer fluid sprays

Check that the washer nozzle is not blocked if there is washer fluid in the washer fluid reservoir.

NOTICE

■When the rear window is dry

Do not use the wiper, as it may damage the rear window.

■When the washer fluid tank is empty

Do not operate the switch continually as the washer fluid pump may over- heat.

227

PRIUS v_OM_OM47840U_(U)

2-3. Operating the lights and windshield wipers Headlight cleaner switch

Washer fluid can be sprayed on the headlights.

Press the switch to clean the headlights.

■The headlight cleaners can be operated when

The “POWER” switch is in ON mode and the headlight switch is turned on.

■Windshield washer linked operation

Only for the first time when the windshield washer is operated with the “POWER” switch in ON mode and the headlights on, the headlight cleaners will operate once. (P. 221)

NOTICE

■When the washer fluid tank is empty

Do not press the switch continually as the washer fluid pump may overheat.

228

: If equipped

PRIUS v_OM_OM47840U_(U)

2-4. Using other driving systems Cruise control

Use the cruise control to maintain a set speed without depressing the accelerator pedal.

Indicators Cruise control switch

■ Setting the vehicle speed

STEP 1

Press the “ON-OFF” button to activate the cruise control.

indicator will

Cruise control come on. Press deactivate the cruise control.

the button again

to

STEP 2

Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed.

“SET” indicator will come on. The vehicle speed at