2015 Toyota Camry Owners Manual

(U.S.A.)

Tire pressure warning light (P. 448)

required Maintenance reminder light (P. 449)

*1: Vehicles without a smart key system:

These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. Vehicles with a smart key system: These lights turn on when the engine switch is turned to IGNITION ON mode to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a mal- function in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.

*2: If equipped *3: The light comes on in yellow to indicate a malfunction. *4: The light turns on when the system is turned off.

CAMRY_U (OM33A86U)

2. Instrument cluster

75

Indicators The indicators inform the driver of the operating state of the vehicle’s various systems.

Turn signal indicator (P. 166)

*2, 5 Radar cruise control

indicator (P. 188)

Headlight indicator (P. 168)

Tail light indicator (P. 168)

(U.S.A.)

(Canada)

Headlight high beam indicator (P. 169)

*2, 4 Cruise control “SET” indicator (P. 183)

*1, 2, 6 Pre-collision

system warning light (P. 221)

*2, 4

(Lane Departure

LDA Alert) indicator (P. 201)

*2 Automatic High Beam

indicator (P. 172)

*1, 7

Slip indicator (P. 217)

*1, 3 Eco driving

(P. 81)

indicator

*1 VSC OFF indicator

(P. 218)

“TRAC OFF” indicator (P. 217)

Cruise control indicator (P. 183)

*1, 8

*8

“PASS AIR BAG ON/ OFF” indicator (P. 47)

Security indicator (P. 67, 69)

*1, 2

*2, 4

(Green)

CAMRY_U (OM33A86U)

76

2. Instrument cluster

*1: Vehicles without a smart key system:

These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. Vehicles with a smart key system: These lights turn on when the engine switch is turned to IGNITION ON mode to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a mal- function in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.

*2: If equipped *3: The light does not turn on when the system is disabled. *4: Vehicles with a multi-information display: This light illuminates on the multi-

information display.

*5: This light illuminates on the multi-information display. *6: The light turns on when the system is off. *7: The light flashes to indicate that the system is operating. *8: This light illuminates on the center panel.

WARNING

■If a safety system warning light does not come on

Should a safety system light such as the ABS and SRS warning lights not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.

CAMRY_U (OM33A86U)

2. Instrument cluster

77

Gauges and meters

 Vehicles without a multi-information display

10

Tachometer Displays the engine speed in revolutions per minute. Speedometer Fuel gauge Average fuel consumption meter Display change button P. 79
Odometer/trip meter/average fuel consumption display/set speed P. 79, 183
Engine coolant temperature display/meter light control display Displays the engine coolant temperature and meter light control. Outside temperature display Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). Shift position/shift range display Displays the currently selected the shift position and shift range. P. 162
Instrument panel light control button P. 80

CAMRY_U (OM33A86U)

78

2. Instrument cluster

 Vehicles with a multi-information display

10

Tachometer Displays the engine speed in revolutions per minute. Multi-information display Presents the driver with a variety of driving-related data. Displays warning messages in case of a malfunction (P. 456) Outside temperature display Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). Low outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or lower. Speedometer Display change button P. 79
Fuel gauge Odometer and trip meter display P. 79
Shift position/shift range display Displays the currently selected the shift position and shift range. P. 162
Engine coolant temperature gauge Displays the engine coolant temperature. Instrument panel light control button P. 80

CAMRY_U (OM33A86U)

2. Instrument cluster

79

Changing the odometer/trip meter display Pressing the display change but- ton changes the display as fol- lows.

 Without a multi-information display

 With a multi-information display

■ Odometer

Displays the total distance the vehicle has been driven.

■ Trip meter A*/trip meter B*

Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and dis- play different distances independently.

■ Average fuel consumption (vehicles without a multi-informa-

tion display)* Displays the average fuel consumption since the function was reset.

Use the displayed average fuel consumption as a reference.

*: Press and hold the display change button to reset.

CAMRY_U (OM33A86U)

80

2. Instrument cluster

Instrument panel lights control button The brightness of the Instrument panel lights can be adjusted. Pressing the button will adjust brightness of the Instrument panel lights.

 Without a multi-information display

 With a multi-information display

Eco Driving Indicator Light customization (vehicles without a multi-information display) Eco Driving Indicator Light can be activated or deactivated.

While the odometer is being displayed, press and hold the display change button to dis- play the Eco Driving Indicator Light customization screen.

Press the display change button to set Eco Driving Indicator Light to on or off. Press and hold the display change button to complete the setting.

If off is selected, Eco Driving Indicator Light will not be displayed.

CAMRY_U (OM33A86U)

2. Instrument cluster

81

 Without a multi-information display

 With a multi-information display

■Eco driving indicator light

(Eco During Eco-friendly acceleration driving), Eco Driving Indicator Light will turn on. When the acceleration exceeds the Eco driving accelerator upper limit, or the vehicle is stopped, the light turns off. Eco Driving Indicator Light will not operate in the following conditions: ●The shift lever is in anything other than

D.

●The paddle shift switch is used. (If

equipped)

●The vehicle speed is approximately 80

mph (130 km/h) or higher.

■The meters and display illuminate when

 Vehicles without a smart key system The engine switch is in the “ON” position.  Vehicles with a smart key system The engine switch is in IGNITION ON mode.

■The brightness of the instrument panel lights

When the tail lights are turned on, the meter’s brightness will be reduced slightly unless the meter brightness level adjustment is set to the brightest setting. If the tail lights are turned on when the surroundings are dark, the meter’s brightness will reduce slightly. However, when the surroundings are bright, such as during the daytime, the meter’s brightness will not be reduced even if the tail lights are turned on.

■Outside temperature display

In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change. ●When stopped, or driving at low speeds (less than 16 mph [25 km/h]) ●When the outside temperature has changed suddenly (at the entrance/exit

of a garage, tunnel, etc.)

CAMRY_U (OM33A86U)

82

2. Instrument cluster

NOTICE

■To prevent damage to the engine and its components

●Do not let the indicator needle of the tachometer enter the red zone, which

indicates the maximum engine speed.

●Vehicle without a multi-information display: The engine may be overheat- ing if the rightmost segment of the engine coolant temperature display is flashing. In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (P. 493) Vehicle with a multi-information display: The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (P. 493)

CAMRY_U (OM33A86U)

2

2. Instrument cluster

83

Multi-information display (if equipped)

Display contents The multi-information display presents the driver with a variety of vehi- cle data. ● Menu icons

Displays the following informa- tion when an icon is selected. (P. 84) Some of the information may be displayed automatically depending on the situation.

Drive information

Select to display various drive data. (P. 85)

Navigation system-linked display (if equipped)

Select to display the following navigation system-linked information. • Route guidance • Compass display (north-up display/heading-up display)

Audio system-linked display

Select to enable selection of an audio source or track on the meter using the meter control switches.

Dynamic radar cruise control operation guide (if equipped)

Select to display operation procedures of the dynamic radar cruise control. (P. 188)

tab will change to The speed control mode. (P. 194) If activated, the operational status of the LDA (Lane Departure Alert) system will also be displayed. (If equipped) (P. 202)

when the vehicle is in constant

CAMRY_U (OM33A86U)

84

2. Instrument cluster

Warning message display

Select to display warning messages and measures to be taken if a malfunction is detected. (P. 456)

Settings display

Select to change the meter display settings. (P. 86)

■ Operating the meter control switches

Scroll up/down the screen and move up/down the cur- sor Switch menu/Displays top screen Press: Enters/Sets Press and hold: Resets Returns screen

the previous

the

to

CAMRY_U (OM33A86U)

2. Instrument cluster

85

Drive information ● Average fuel economy*1, 2/Tank average fuel economy*1/Trip aver-

age fuel economy*1
Displays the average fuel consumption since the function was reset, the vehicle was refueled, and the engine was started, respec- tively

Use the displayed average fuel consumption as a reference.

● Current fuel economy*1

Displays the current rate of fuel consumption

● Distance to empty*1/Trip distance*1/Distance*1, 2

Displays the estimated maximum distance that can be driven with the quantity of fuel remaining, the distance driven after the engine was started and the distance since the function was reset, respec- tively. • This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that dis- played.

• When only a small amount of fuel is added to the tank, the display may

not be updated. When refueling, turn the engine switch off. If the vehicle is refueled with- out turning the engine switch off, the display may not be updated.

● Trip elapse time*1/Elapse time*1, 2

Displays the engine was started and the elapsed time since the function was reset, respectively

● Trip average speed*1/Average speed*1, 2

Displays the engine was started and the average vehicle speed since the function was reset, respectively

● Digital speedometer*1
● Tire inflation pressure*3

P. 404

*1: Can be registered to Drive information 1 through 3. (P. 86) *2: Resetting procedures:

• Select a function to be reset using the meter control switch and then

press and hold to reset.

• If there is more than one function that can be reset, check boxes will be

displayed next to those functions.

*3: Vehicles with a tire inflation pressure display function

CAMRY_U (OM33A86U)

86

2. Instrument cluster

Settings display ■ Changing the settings

using the meter control switch.

Select Select an item and then set it with the center button.

■ Customizable items

● Language

Select to change the language on the display.

● Units

Select to change the unit of measure for fuel consumption.

● Drive information 1 through 3

Select to select up to 2 items that will be displayed on a Drive information screen, up to 3 Drive information screens can be set.

● Eco driving indicator light

Select to activate/deactivate the Eco Driving Indicator Light. (P. 81)

● Pop-up display

Select to set the following pop-up displays, which may appear in some situations, on/off. • Instrument panel brightness adjustment display • Route guidance display of the navigation system-linked sys-

• Cruise control operation display (vehicles with dynamic radar

tem (if equipped)

cruise control)

• Incoming call display of the hands-free phone system • Shift position and range display

● Accent color

Select to change the accent colors on the screen, such as the cursor color.

● Speed limit display*

Select to set the display of speed limit information stored in the navigation system (if equipped) to on with the speed limit caution indicator (yellow) enabled, on with the speed limit caution not enabled, or off. If enabled, the speed limit caution indicator will come on if the vehicle speed exceeds the displayed speed limit.

CAMRY_U (OM33A86U)

2

2. Instrument cluster

87

● Maintenance system (U.S.A.)

Select to reset the message after the required maintenance is performed. (P. 381)

● Initialization

Registered or changed meter settings will be deleted or returned to their default setting.

*: Speed limit display may not be available for some regions.

■Setting display automatic cancelation

In the following situations, a setting display in which the settings can be changed through the meter control switches will automatically be turned off. ●When a warning message appears while the setting display is displayed ●When the vehicle begins to move while the setting display is displayed

■Tire inflation pressure (vehicles with a tire pressure warning system)

●Vehicles without a smart key system:

It may take a few minutes to display the tire inflation pressure after the engine switch is turned to the “ON” position. It may also take a few min- utes to display the tire inflation pressure after inflation pressure has been adjusted Vehicles with a smart key system: It may take a few minutes to display the tire inflation pressure after the engine switch is turned to IGNITION ON mode. It may also take a few minutes to display the tire inflation pressure after inflation pressure has been adjusted

●“---” may be displayed if the tire information cannot be determined due to

unfavorable radio wave conditions.

●Tire inflation pressure changes with temperature. The displayed values may also be different from the values measured using a tire pressure gauge.

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

CAMRY_U (OM33A86U)

88

2. Instrument cluster

WARNING

■The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to down- shift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury.

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

NOTICE

■During setting up the display

To prevent battery discharge, ensure that the engine is running while setting up the display features.

CAMRY_U (OM33A86U)

2. Instrument cluster

89

Fuel consumption information Fuel consumption information can be displayed on the Entune Audio system and/or the navigation system.

Entune Audio system or naviga- tion system

CTY20BJ045

Trip information  Entune Audio system with “CAR” button Press the “CAR” button.

If the “Past Record” screen is dis- played, select “Trip Information”.

 Entune Audio system or navigation system with “APPS” button

Press the “APPS” button. Touch “Eco” on screen. If the “Past Record” screen is dis- played, select “Trip Information”.

the “Apps”

CAMRY_U (OM33A86U)

90

2. Instrument cluster

Resetting the consumption data Average vehicle speed since the engine was started Elapsed time since the engine was started Fuel consumption in the past 15
minutes Cruising range (P. 91)

Vehicles without a smart key system: Average fuel consumption for the past 15 minutes is divided by color into past averages and averages attained since the engine switch was last turned to the “ON” position. Use the displayed average fuel con- sumption as a reference. Vehicles with a smart key system: Average fuel consumption for the past 15 minutes is divided by color into past averages and averages attained since the engine switch was last turned to IGNITION ON mode. Use the displayed average fuel consumption as a reference.

This image is an example only.

CAMRY_U (OM33A86U)

2

2. Instrument cluster

91

Past record  Entune Audio system with “CAR” button Press the “CAR” button.

If the “Trip Information” screen is displayed, select “Past Record”.

 Entune Audio system or navigation system with “APPS” button

Press the “APPS” button. Touch “Eco” on the “Apps” screen. If the “Trip Information” screen is displayed, select “Past Record”. Resetting the past record data Best recorded fuel consumption Average fuel consumption Previous record Current fuel economy Updating the average fuel con- sumption data

consumption

fuel

The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated. Use the displayed average fuel consumption as a reference.

This image is an example only.

■Updating the past record data

Update the average fuel consumption by selecting “Update” to measure the current fuel consumption again.

■Resetting the data

The fuel consumption data can be deleted by selecting “Clear”.

■Cruising range

Displays the estimated maximum distance that can be driven with the quan- tity of fuel remaining. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that dis- played.

CAMRY_U (OM33A86U)

92

2. Instrument cluster

CAMRY_U (OM33A86U)

93

Operation of each component

3-1. Key information

Keys .................................... 94

3-2. Opening, closing and

locking the doors Doors ................................ 101
Trunk................................. 109
Smart key system ............. 114

3-3. Adjusting the seats

Front seats ........................ 121
Rear seats......................... 123
Head restraints.................. 125

3-4. Adjusting the steering

wheel and mirrors Steering wheel .................. 127
Inside rear view mirror ...... 129
Outside rear view mirrors............................. 131

3-5. Opening and closing

the windows Power windows ................. 133
Moon roof.......................... 136

CAMRY_U (OM33A86U)

94

3-1. Key information

Keys

The keys The following keys are provided with the vehicle.  Vehicles without a smart key system (type A)

Master keys Operating the wireless remote con- trol function (P. 95) Valet key Key number plate

 Vehicles without a smart key system (type B)

Master keys Operating the wireless remote con- trol function (P. 95) Valet key Key number plate

 Vehicles with a smart key system

Electronic keys • Operating the smart key system

(P. 114)

• Operating the wireless remote

control function (P. 95)

Mechanical keys Key number plate

CAMRY_U (OM33A86U)

3-1. Key information

95

Wireless remote control  Vehicles without a smart key system (type A)

*: This setting must be customized at your Toyota dealer.  Vehicles without a smart key system (type B)

Locks all the doors (P. 101) Sounds the alarm (P. 97) Unlocks all the doors (P. 101) Pressing the button unlocks the driver’s door. Pressing the button again within 5 seconds unlocks the other doors. Opens the driver’s window and moon roof (if equipped) (P. 101)* Opens the trunk (P. 110)

Locks all the doors (P. 101) Unlocks all the doors (P. 101) Pressing the button unlocks the driver’s door. Pressing the button again within 5 seconds unlocks the other doors. Opens the driver’s window and moon roof (if equipped) (P. 101)* Sounds the alarm (P. 97) Opens the trunk (P. 110)

*: This setting must be customized at your Toyota dealer.

CAMRY_U (OM33A86U)

96

3-1. Key information

 Vehicles with a smart key system

Locks all the doors (P. 101) Unlocks all the doors (P. 101) Pressing the button unlocks the driver’s door. Pressing the button again within 5 seconds unlocks the other doors. Opens the driver’s window and moon roof (if equipped) (P. 101)* Opens the trunk (P. 110) Sounds the alarm (P. 97)

*: This setting must be customized at your Toyota dealer. Using the mechanical key (vehicles with a smart key system) To take out the mechanical key, push the release button and take the key out.

The mechanical key can only be inserted in one direction, as the key only has grooves on one side. If the key cannot be inserted in a lock cylinder, turn it over and re- attempt to insert it. After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key bat- tery is depleted or the entry function does not operate properly, you will need the mechanical key. (P. 487)

CAMRY_U (OM33A86U)

■Panic mode

 Vehicles without a smart key system When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the wireless remote control.

 Vehicles with a smart key system is pressed for longer than When about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the electronic key.

3-1. Key information

97

■When required to leave the vehicle’s key with a parking attendant

Lock the glove box as circumstances demand. (P. 343) Vehicles without a smart key system: Carry the master key for your own use and provide the attendant with the valet key. Vehicles with a smart key system: Remove the mechanical key for your own use and provide the attendant with the electronic key only.

■If you lose your keys

New genuine keys can be made by your Toyota dealer using the other key (vehicles without a smart key system) or the other mechanical key (vehicles with a smart key system) and the key number stamped on your key number plate. Keep the plate in a safe place such as your wallet, not in the vehicle.

■When riding in an aircraft

When bringing a key with wireless remote control function onto an aircraft, make sure you do not press any button on the key while inside the aircraft cabin. If you are carrying the key in your bag etc., ensure that the buttons are not likely to be pressed accidentally. Pressing a button may cause the key to emit radio waves that could interfere with the operation of the aircraft.

CAMRY_U (OM33A86U)

98

3-1. Key information

■Conditions affecting operation

 Vehicles without a smart key system The wireless remote control function may not operate normally in the follow- ing situations: ●When the wireless key battery is depleted ●Near a TV tower, electric power plant, gas station, radio station, large dis- play, airport or other facility that generates strong radio waves or electrical noise

●When carrying a portable radio, cellular phone or other wireless communi-

cation devices

●When the wireless key is in contact with, or is covered by a metallic object ●When other wireless key (that emit radio waves) is being used nearby ●If window tint with a metallic content or metallic objects are attached to the

rear window

 Vehicles with a smart key system P. 117

■Key battery depletion

 Vehicles without a smart key system If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary. (P. 420)  Vehicles with a smart key system ●The standard battery life is 1 to 2 years. ●If the battery becomes low, an alarm will sound in the cabin when the engine

stops. (P. 468)

●As the electronic key always receives radio waves, the battery will become depleted even if the electronic key is not used. The following symptoms indi- cate that the electronic key battery may be depleted. Replace the battery when necessary. (P. 420) • The smart key system or the wireless remote control does not operate. • The detection area becomes smaller. • The LED indicator on the key surface does not turn on.

●To avoid serious deterioration, do not leave the electronic key within 3 ft. (1

m) of the following electrical appliances that produce a magnetic field: • TVs • Personal computers • Cellular phones, cordless phones and battery chargers • Recharging cellular phones or cordless phones • Table lamps • Induction cookers ■Replacing the battery

P. 420

CAMRY_U (OM33A86U)

3

3-1. Key information

99

■Confirmation of the registered key number (vehicles with a smart key

system) The number of keys already registered to the vehicle can be confirmed. Ask your Toyota dealer for details.

■If a wrong key is used (vehicles with a smart key system)

The key cylinder rotates freely to isolate inside mechanism. ■Customization that can be configured at Toyota dealer

Settings (e. g. smart key system) can be changed. (Customizable features: P. 525)

■Certification for the wireless remote control (vehicles without a smart

key system)  U.S.A. FCC ID: HYQ23AAC FCC ID: HYQ23AAN FCC ID: HYQ12BDM NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  Canada NOTE: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.

■Certification for wireless remote control (vehicles with a smart key sys-

tem) P. 120

CAMRY_U (OM33A86U)

100

3-1. Key information

NOTICE

■To prevent key damage

●Do not drop the keys, subject them to strong shocks or bend them. ●Do not expose the keys to high temperatures for long periods of time. ●Do not get the keys wet or wash them in an ultrasonic washer etc. ●Do not attach metallic or magnetic materials to the keys or place the keys

close to such materials.

●Do not disassemble the keys. ●Do not attach a sticker or anything else to the surface of the key with a

wireless remote control function.

●Vehicles with a smart key system: Do not place the keys near objects that produce magnetic fields, such as TVs, audio systems and induction cook- ers, or medical electrical equipment, such as low-frequency therapy equip- ment.

■Carrying the electronic key on your person (vehicles with a smart key

system) Carry the electronic key 3.9 in. (10 cm) or more away from electric appli- ances that are turned on. Radio waves emitted from electric appliances within 3.9 in. (10 cm) of the electronic key may interfere with the key, caus- ing the key to not function properly.

■In case of a smart key system malfunction or other key-related prob-

lems (vehicles with a smart key system) Take your vehicle with all the electronic keys provided with your vehicle to your Toyota dealer.

■When an electronic key is lost (vehicles with a smart key system)

If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that were provided with your vehicle.

CAMRY_U (OM33A86U)

3-2. Opening, closing and locking the doors

101

Doors

Unlocking and locking the doors from the outside ◆ Smart key system (if equipped)

Carry the electronic key to enable this function.

Grip the driver’s door handle to unlock the door. Grip the front passenger’s door han- dle to unlock all the doors.* Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked.

*: The door unlock settings can be changed. (P. 107)

Touch the lock sensor (the indentation on the side of the door handle) to lock the doors. Check that the door is securely locked.

◆ Wireless remote control  Vehicles without a smart key system

Locks all the doors Check that the door is securely locked. Unlocks all the doors Pressing the button unlocks the driver’s door. Pressing the but- ton again within 5 seconds unlocks the other doors. Press and hold to open the driver’s window and moon roof.* (P. 134, 137)

*: This setting must be customized

at your Toyota dealer.

 Type A

 Type B

CAMRY_U (OM33A86U)

102

3-2. Opening, closing and locking the doors

 Vehicles with a smart key system

*: This setting must be customized at your Toyota dealer.

◆ Key Turning the key operates the doors as follows:  Vehicles without a smart key system

Locks all the doors Check that the door is securely locked. Unlocks all the doors Pressing the button unlocks the driver’s door. Pressing the but- ton again within 5 seconds unlocks the other doors. Press and hold to open the driver’s window and moon roof.* (P. 134, 137)

Locks all the doors Turn and hold to close the win- dows and moon roof.* (P. 134, 137) Unlocks the door Turning the key unlocks the driver's door. Turning the key again unlocks the other doors. Turn and hold the driver’s window and moon roof.* (P. 134, 137)

to open

*: This setting must be customized at your Toyota dealer.

 Vehicles with a smart key system The doors can also be locked and unlocked with the mechanical key. (P. 487)

CAMRY_U (OM33A86U)

3-2. Opening, closing and locking the doors

103

■Operation signals

Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Driver’s window and moon roof: A buzzer sounds to indicate that the driver’s window and moon roof are open- ing.

■Security feature

If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.

■When the door cannot be locked by the lock sensor on the upper part of

the door handle If the door will not lock even when the top- side sensor area is touched, try using your palm to touch the lock sensor.

■Door lock buzzer (vehicles with a smart key system)

If an attempt to lock the doors is made when a door is not fully closed, a buzzer will sound for 5 seconds. Fully close the door to stop the buzzer, and lock the doors again. ■Alarm (if equipped)

Locking the doors will set the alarm system. (P. 69)

■If the smart key system or the wireless remote control does not operate

properly (vehicles with a smart key system) Use the mechanical key to lock and unlock the doors. (P. 487) Replace the battery with a new one if it is depleted. (P. 420)

CAMRY_U (OM33A86U)

104

3-2. Opening, closing and locking the doors

Unlocking and locking the doors from the inside ◆ Door lock switches Locks all the doors Unlocks all the doors

◆ Inside lock buttons

Locks the door Unlocks the door The front doors can be opened by pulling inside handle even if the lock buttons are in the lock position.

the

Locking the doors from the outside without a key

Move the inside lock button to the lock position. Close the door.

 Vehicles without a smart key system

The door cannot be locked if either of the front doors is open and the key is in the engine switch.

 Vehicles with a smart key system

The door cannot be locked if the engine switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehi- cle.

The key may not be detected correctly and the door may be locked.

CAMRY_U (OM33A86U)

3-2. Opening, closing and locking the doors

105

Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set.

Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.

Automatic door locking and unlocking systems The following functions can be set or cancelled:

Function

Shift position linked door locking function Shift position linked door unlocking function Speed linked door lock- ing function Driver's door linked door unlocking function (vehicles without a smart key system) Driver's door linked door unlocking function (vehicles with a smart key system)

Operation

Shifting the shift lever out of P locks all the doors.

Shifting the shift lever to P unlocks all the doors.

All the doors are locked when the vehicle speed is approximately 12 mph (20 km/h) or higher.

All the doors are unlocked when the driver's door is opened within 10 seconds after turning the engine switch to “ACC” or “LOCK”.

All the doors are unlocked when the driver's door is opened within 10 seconds after turning the engine switch off.

CAMRY_U (OM33A86U)

106

3-2. Opening, closing and locking the doors

■ Setting and canceling the functions

The automatic door locking and unlocking functions can be set or canceled on the audio system screen (P. 525) or by following the procedure below.

Vehicles without a smart key system: Close all the doors and switch the engine switch to the “ON” position. (Perform step within 10 seconds.) Vehicles with a smart key system: Close all the doors and switch the engine switch to IGNITION ON mode. (Perform step within 10 seconds.) Shift the shift lever to P or N, and press and hold the lock switch driver's door or for approximately 5 seconds and then release. The shift lever and switch posi- tions corresponding the desired function to be set are shown as follows. Use the same procedure to cancel the function.

to

Function

Shift lever position

Driver’s door lock switch position

linked door

Shift position linked door lock- ing function Shift position unlocking function Speed linked door locking func- tion Driver's door unlocking function

linked door

When the setting or canceling operation is complete, all doors are locked and then unlocked.

CAMRY_U (OM33A86U)

3-2. Opening, closing and locking the doors

107

■Switching the door unlock function (vehicles with a smart key system) It is possible to set which doors the entry function unlocks using the wireless remote control.

Turn the engine switch off. When the indicator light on the key surface is not on, press and hold

for approximately 5 seconds while pressing and holding

or

The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step

.)

Multi-information

display

Unlocking function

Beep

the driver’s door the

Holding handle unlocks only driver’s door. Holding the front passen- ger’s door handle unlocks all the doors. Holding either handle unlocks all doors.

front door the

Exterior: Beeps 3
times Interior: Pings once

Beeps

Exterior: twice Interior: Pings once

Vehicles with an alarm: To prevent unintended triggering of the alarm, unlock the doors using the wireless remote control and open and close a door once after the settings have been changed. (If a door is not opened within 60 sec- onds after is pressed, the doors will be locked again and the alarm will automatically be set.) In case that the alarm is triggered, immediately stop the alarm. (P. 69)

■Conditions affecting the operation of the smart key system or wireless

remote control  Vehicles without a smart key system P. 98
 Vehicles with a smart key system P. 117

■Customization

Settings (e.g. unlocking function using a key) can be changed. (Customizable features: P. 525)

CAMRY_U (OM33A86U)

108

3-2. Opening, closing and locking the doors

WARNING

■To prevent an accident

Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●Ensure that all doors are properly closed. ●Do not pull the inside handle of the doors while driving.

Be especially careful for the front doors, as the doors may be opened even if the inside lock buttons are in locked position.

●Set the rear door child-protector locks when children are seated in the rear

seats.

■When using the mechanical key and operating the power windows and

moon roof Operate the power window or moon roof after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the window or moon roof. Also, do not allow children to operate the mechanical key. It is possible for children and other passengers to get caught in power window and moon roof.

CAMRY_U (OM33A86U)

3-2. Opening, closing and locking the doors

109

Trunk The trunk can be opened using the trunk opener, entry function, wireless remote control.

Opening the trunk from inside the vehicle Pull up the lever to release the trunk lid.

Opening the trunk from outside the vehicle ◆ Smart key system (if equipped)

While carrying the electronic key, press the button on the trunk lid.

When all the doors are unlocked with the power door lock sys- tem, the trunk can be opened without carrying the electronic key.

CAMRY_U (OM33A86U)

110

3-2. Opening, closing and locking the doors

◆ Wireless remote control  Vehicles without a smart key system

Press and hold the switch.

 Type A

 Type B

 Vehicles with a smart key system

Press and hold the switch.

CAMRY_U (OM33A86U)

3

3-2. Opening, closing and locking the doors

111

■Operation signal

A buzzer sounds to indicate that the trunk has been opened.

■Trunk light

The trunk light turns on when the trunk is opened.

■Function to prevent the trunk being locked with the electronic key inside

(vehicles with a smart key system) ●When all doors are being locked, closing the trunk lid with the electronic key

left inside the trunk will sound an alarm. In this case, the trunk lid can be opened by pressing the trunk release but- ton on the trunk lid.

●Even when the spare electronic key is put in the trunk with all the doors locked, the key confinement prevention function can be activated so the trunk can be opened. In order to prevent theft, take all electronic keys with you when leaving the vehicle.

●Even when the electronic key is put in the trunk with all the doors are locked, the key may not be detected depending on the places and the surrounding radio wave conditions. In this case, the key confinement prevention function cannot be activated, causing the doors to lock when the trunk is closed. Make sure to check where the key is before closing the trunk.

●The key confinement prevention function cannot be activated if any one of

the doors is unlocked. In this case, open the trunk using the trunk opener.

■Internal trunk release lever

The trunk lid can be opened by pulling up the glow-in-the-dark lever located on the inside of the trunk lid. The lever will continue to glow for some time after the trunk lid is closed.

CAMRY_U (OM33A86U)

112

3-2. Opening, closing and locking the doors

WARNING

Observe the following precautions. Failure to do so may result in death or serious injury. ■Before driving

●Make sure that the trunk lid is fully closed. If the trunk lid is not fully closed, it may open unexpectedly while driving and hit near-by objects or luggage in the trunk may be thrown out, causing an accident.

●Do not allow children to play in the trunk.

If a child is accidentally locked in the trunk, they could suffer from heat exhaustion, suffocation or other injuries.

●Do not allow a child to open or close the trunk lid.

Doing so may cause the trunk lid to open unexpectedly, or cause the child’s hands, head, or neck to be caught by the closing trunk lid.

■Important points while driving

Never let anyone sit in the trunk. In the event of sudden braking or a colli- sion, they are susceptible to death or serious injury.

CAMRY_U (OM33A86U)

3-2. Opening, closing and locking the doors

113

WARNING

■Using the trunk

Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in seri- ous injury. ●Remove any heavy loads, such as snow and ice, from the trunk lid before opening it. Failure to do so may cause the trunk lid to suddenly shut again after it is opened.

●When opening or closing the trunk lid, thoroughly check to make sure the

surrounding area is safe.

●If anyone is in the vicinity, make sure they are safe and let them know that

the trunk is about to open or close.

●Use caution when opening or closing the trunk lid in windy weather as it

may move abruptly in strong wind.

●The trunk lid may suddenly shut if it is not opened fully. It is more difficult to open or close the trunk lid on an incline than on a level surface, so beware of the trunk lid unexpectedly opening or closing by itself. Make sure that the trunk lid is fully open and secure before using the trunk.

●When closing the trunk lid, take extra care to prevent your fingers etc. from being caught.

●When closing the trunk lid, make sure to

press it lightly on its outer surface.

●Do not attach any accessories other than genuine Toyota parts to the trunk lid. Such additional weight on the trunk lid may cause the lid to suddenly shut again after it is opened.

CAMRY_U (OM33A86U)

114

3-2. Opening, closing and locking the doors

Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.)

● Locks and unlocks the doors (P. 101)