2007 Subaru Legacy Owners Manual

Download PDF Manual
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Left Page Model "ALL_MODEL_MEMO" EDITED: 2006/ 1/ 17 Black plate (9,1) Audio Antenna system .................................................. Printed antenna................................................... FM reception ....................................................... XMTM Satellite radio reception (if equipped) ..... Installation of accessories.................................. Audio set ............................................................ Type A audio set (if equipped) ............................. Type B audio set (if equipped) ............................. Power and sound controls ................................. Power switch and volume control ........................ Tone and balance control .................................... Audio effector switching (type B) ......................... 5-2 5-2 5-2 5-2 5-4 5-5 5-5 5-6 5-7 5-7 5-7 5-9 FM/AM radio operation ...................................... 5-10 FM/AM selection................................................. 5-10 Tuning ............................................................... 5-10 Station preset .................................................... 5-11 Satellite radio operation (if equipped) .............. 5-12 XMTM satellite radio ............................................ 5-12 Satellite radio reception...................................... 5-12 Band selection ................................................... 5-12 Channel and category selection.......................... 5-13 Channel preset................................................... 5-14 Display selection................................................ 5-14 CD player operation .......................................... How to insert a CD (type A)................................ How to insert a CD(s) (type B)............................ How to play back a CD ...................................... To select a track from its beginning.................... Fast-forwarding and fast-reversing ..................... Repeating .......................................................... Random playback .............................................. Scan ................................................................. Display selection ............................................... Folder selection ................................................. How to eject a CD from the player (type A) ......... How to eject CDs from the player (type B) .......... When the following messages are displayed......................................................... AUX unit operation ............................................ AUX jack ........................................................... AUX inputs selection button............................... Audio control buttons (if equipped) ................. MODE button..................................................... Precautions to observe when handling a compact disc................................................... 5-15 5-15 5-15 5-17 5-17 5-18 5-19 5-20 5-21 5-22 5-22 5-23 5-23 5-24 5-25 5-25 5-25 5-26 5-26 5-27 北米Model "A2420BE-B" EDITED: 2006/ 7/ 31 5-2 Audio Antenna system & Printed antenna CAUTION Do not use sharp instruments or window cleaner containing abra- sives to clean the inner surface of the window on which the antenna is printed. Doing so may damage the antenna printed on the window. Sedan Station wagon The antenna is printed on the inner surface of the rear window glass. & FM reception Although FM is normally static free, reception can be affected by the surround- ing area, atmospheric conditions, station strength and transmitter distance. Build- ings or other obstructions may cause momentary static, flutter or station inter- ference. reception continues to be unsatisfactory, switch to a stronger station. If Black plate (192,1) XMTM Satellite radio recep- tion (if equipped) XMTM is a continental U.S. based satellite radio service that offers more than 160 coast to coast channels, including music, news, sports, talk and children’s program- ming. XMTM provides digital quality audio and text information, including song title and artist name. A service fee is required to receive the XMTM service. For more information, contact XMTM at www.xmradio.com or call 1-800-XM- RADIO (1-800-967-2346). The XMTM satellite radio receiver that is fitted to your vehicle receives the neces- sary signals from two specially designated satellites that are in a geostationary orbit over the equator. One satellite covers the east coast and the other covers the west coast. Both of their signals north. These signals are then relayed throughout the USA by a network of ground repeater stations. The satellite radio signals are transmitted as “line of sight” signals. Line of sight signals can be blocked by objects such as buildings, but the network of repeater stations allows signal coverage within urban areas such as cities. You may experience problems in receiving them direct 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 XMTM satellite radio signals in the follow- ing situations. . If you are driving northward in a coastal area the XMTM satellite You will notice that radio antenna is fixed to the upper right hand corner of your windscreen. Black plate (193,1) Audio 5-3 The signal comes from the south and may not be able to reach the antenna in some circumstances when you are driving north. . If you are driving in a tunnel or a covered parking area . If you are driving beneath the top level of a multi-level freeway . If you drive under a bridge . If you are driving next to a tall vehicle (such as a truck or a bus) that blocks the signal . If you are driving in a valley where the surrounding hills or peaks block the signal from the south . If you are driving on a mountain road where the southern direction is blocked by mountains . If you are driving in an area with tall trees that block the signal (10 m or more), for example on a road that goes through a dense forest . The signal can become weak in some areas that are not covered by the repeater station network. Please note that these may be other unforeseen circumstances when there are problems with the reception of XMTM satellite radio signals. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (194,1) 5-4 Audio Installation of accessories Always consult your SUBARU dealer before installing a citizen band radio or other transmitting device in your vehicle. Such devices may cause the electronic control system to malfunction if they are incorrectly installed or they are not suited for the vehicle. if 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Audio set Your SUBARU may be equipped with one of the following audio sets. See the pages indicated in this section for operating details. & Type A audio set (if equipped) Black plate (195,1) Audio 5-5 The audio set will operate only when the ignition switch is in the “ACC” or “ON” position. . Power and sound controls: page 5-7 . Radio operation: refer to page 5-10 . Satellite radio operation (if equipped): refer to page 5-12 . CD (compact disc) player operation: refer to page 5-15 . AUX unit operation: refer to page 5-25 refer to – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 5-6 Audio & Type B audio set (if equipped) Black plate (196,1) The audio set will operate only when the ignition switch is in the “ACC” or “ON” position. . Power and sound controls: page 5-7 . Radio operation: refer to page 5-10 . Satellite radio operation (if equipped): refer to page 5-12 . CD (compact disc) player operation: refer to page 5-15 . AUX unit operation: refer to page 5-25 refer to 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (197,1) & Tone and balance control ! To change tone control modes Audio 5-7 Power and sound controls & Power switch and volume control The dial is used for both power (ON/OFF) and volume control. The radio is turned ON and OFF by pushing the dial and the volume is controlled by turning the dial. The dial can also be used for tone and balance adjustment. The volume control dial normally functions as a volume control. This dial becomes a control for Bass, Midrange, Treble, Fader or Balance when you select the appro- priate tone and balance control mode. Choose desired volume level for each mode by turning the volume control dial. The control function returns to volume control mode after approximately 5 sec- onds. Each brief press of the “AUDIO” button changes control modes in the following sequence starting from volume control mode. (When the radio is first turned on, the control mode is in the volume control.) The “AUDIO” button is used for selecting the following control modes: – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 5-8 Audio Control mode (Range of levels) Black plate (198,1) ! To change balance control modes Bass control (−6 to +6) Midrange control (−6 to +6) Treble control (−6 to +6) Volume control (0 to 40) AUX volume control* (0 to 40) Turn counterclockwise Turn clockwise For less bass sound For more bass sound For less midrange sound For more midrange sound For less treble sound For more treble sound For less volume For less volume For more volume For more volume * Only when an AUX audio product is connected. the “BAL” button Each brief press of changes control modes in the following sequence starting from volume control mode. (When the radio is first turned on, the control mode is in the volume control.) The “BAL” button is used for selecting the following control modes: 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (199,1) Audio 5-9 & Audio effector switching (type B) Turn counterclockwise Turn clockwise Control mode (Range of levels) Fader control (R9 to F9) Balance control (L9 to R9) To decrease front speaker vo- lume To increase left speaker vo- lume and decrease right speaker volume To decrease rear speaker vo- lume To increase right speaker vo- lume and decrease left speaker volume Volume control (0 to 40) AUX volume control* (0 to 40) For less volume For less volume For more volume For more volume * Only when an AUX audio product is connected. 1. When continuing to press the “AUDIO” button, the “SRS WOW” of audio effector system starts up with a beep sound. The illumination “ ” of the indicator shows the status of the SRS WOW mode selection. 2. When continuing to press the “AUDIO” button in the SRS WOW mode, the beep sound and the SRS WOW mode finish, and the “ ” turns off. NOTE SRS technology is incorporated under license from SRS Labs, Inc. SRS WOW, SRS and symbol are trademarks of SRS Labs, Inc. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (200,1) 5-10 Audio The SRS WOW mode has the following qualities. . Natural feeling of stereophonic ef- fect . Rich and varied bass sound . Crystal-clear sound FM/AM radio operation & FM/AM selection & Tuning ! Manual tuning Push the “FM AM” button when the radio is off to turn on the radio. Push the “FM AM” button when the radio is on to select FM1, FM2 or AM reception. Each brief press of the “FM AM” button changes the radio in the following se- quence starting from the last radio band with you selected. Press the “ ” side of the TUNE/TRACK button to increase the tuning frequency and press the tuning button marked “ ” to decrease it. Each time the button is pressed, the frequency interval can be changed be- tween 10 kHz in the AM mode and 0.2 MHz in the FM mode. If you hold down the “ the button, the tuning frequency will increase continuously, and if you hold down the “ the tuning frequency will decrease continuously. Re- lease the button when your desired frequency is reached. the button, ” side of ” side of 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 select the desired station. ! Scan tuning (SCAN) NOTE While you are holding down either side of the TUNE/TRACK button, the tuning frequency will not stop changing even if the frequency of a receivable station is reached. ! Stereo indicator The stereo indicator “ST” will come on when an FM stereo broadcast is received. ! Seek tuning (SEEK) ” or “ the station for If you press the “ ” side of the SEEK/SCAN button for 0.5 second or longer, the radio will switch to scan mode. In this mode, the radio scans through the radio band until a station is found. The radio will stop at five seconds while displaying the frequency, after which scanning will continue until the entire band has been scanned. Press the “ ” side of the button again to cancel the scan mode and to stop on any displayed frequency. If you hold down the “ the the radio will scan up the fre- button, quency band (from low frequencies to high frequencies). If you hold down the “ ” ” side of ” or “ ” or “ If you press the “ ” side of the SEEK/SCAN button briefly, the radio will automatically search for a receivable station and stop at the first one it finds. This function may not be available, how- ever, when radio signals are weak. In such a situation, perform manual tuning to Black plate (201,1) Audio 5-11 side of the button, the radio will scan down the frequency band (from high frequencies to low frequencies). Automatic tuning may not function prop- erly if the station reception is weakened by distance from the station or proximity to tall buildings and hills. & Station preset ” or “ ! How to preset stations 1. Press the “FM AM” button to select FM1, FM2 or AM reception. 2. Press the “ the button or tune the radio manually until the desired station frequency is displayed. 3. Press one of the preset buttons for more than 1.5 seconds to store the frequency. If the button is pressed for less than 1.5 seconds, the preceding selection will remain in memory. ” side of NOTE . If the connection between the radio and battery is broken for any reason such as vehicle maintenance or radio removal, all stations stored in the this preset buttons are cleared. occurs, the preset buttons. . If a cell phone is placed near the If is necessary to reset it – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 5-12 Audio radio, it may cause the radio to emit noise when it receives calls. This noise does not indicate a radio fault. Satellite radio operation (if equipped) ! Selecting preset stations Presetting a station with a preset button allows you to select that station in a single operation. Up to six AM, FM1 and FM2 stations each may be preset. To receive satellite radio, it is necessary to install the Subaru genuine satellite recei- ver (dealer option) and to enter into a contract. For details, please contact your SUBARU dealer. & XMTM satellite radio XMTM is a continental U.S. based satellite radio service that offers more than 160 coast to coast channels, including music, news, sports, talk and children’s program- ming. XMTM provides digital quality audio and text information, including song title and artist name. A service fee is required to receive the XMTM service. For more information, contact XMTM at www.xmradio.com or call 1-800-XM- RADIO (1-800-967-2346). & Satellite radio reception Satellite radio signals are best received in areas with a clear view of the open sky. In areas where there are tall buildings, trees, tunnels or other structures that may obstruct the signal of the satellites, there may be signal interruptions. Other circum- stances that may result loss include driving near a wall, steep cliff, hill in signal Black plate (202,1) or driving on the lower level of a multi- tiered road or inside of a parking garage. To help reduce this condition, satellite radio providers have installed ground- based repeaters in heavily populated areas. However, you may still experience reception problems in some areas. & Band selection Push the “SAT” button when the radio is off to turn on the radio. Push the “SAT” button when the radio is on to select XM1, XM2 or XM3 reception. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (203,1) Audio 5-13 & Channel and category selec- tion ! Channel selection ! Category selection ! Channel scan Press “ button to select press “ previous category. ” of ” of the FOLDER/CATEGORY the next category and the the button to select ” of the TUNE TRACK button to Press “ select the next channel and press “ ” of the button to select the previous channel. Keep pressing “ the button to change to the next channel continuously and keep pressing “ ” of the button to change to the previous channel continu- ously. ” of In this mode, Press the “ ” side of the SEEK/SCAN button to change the radio to the SCAN mode. the radio scans through the channel until a station is found. The radio will stop at the station for five seconds while displaying the channel number, after which scanning will continue until the entire channel has been scanned from the low end to the high end. Press the “ ” side of the button again to cancel the SCAN mode and to stop on any displayed channel. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (204,1) 5-14 Audio & Channel preset ! Selecting preset channels & Display selection ! How to preset channels 1. Press the “SAT” button to select XM1, XM2 and XM3 reception. 2. Press the SEEK/SCAN button or the TUNE TRACK button to select the chan- nel. the preset buttons for 3. Press one of more than 1.5 seconds to store the channel. If the button is pressed for less than 1.5 seconds, the preceding selection will remain in memory. NOTE If the connection between the radio and battery is broken for any reason such as vehicle maintenance or radio re- moval, all channels stored in the preset buttons are cleared. If this occurs, it is necessary to reset the preset buttons. Presetting a channel with a preset button allows you to select in a single operation. Up to six XM1, XM2 and XM3 channels each may be preset. that channel Press the “TEXT” button while receiving the satellite radio to change the display as follows: 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 CD player operation NOTE . Make sure to always insert a disc with the label side up. If a disc is inserted with the label side down, the player displays “CHECK DISC”. Refer to “When the following messages are displayed” in this section. . If a disc is inserted during a radio broadcast, the disc will interrupt the broadcast. . After the last song finishes, the disc will automatically return to track 1 (the first song on the disc) and will auto- matically play back. . The player is designed to be able to play music CD-Rs and music CD-RWs, but it may not be able to play certain ones. . Single CDs (i.e., 8 cm/3 inch CDs) are not supported, and if inserted, they will be immediately ejected. . The file (song) that has protected by copyright of WMA cannot be played, and the player will skip to the next file (song). & How to insert a CD (type A) Hold a disc with a finger in the center hole while gripping the edge of the disc, then insert it in to the slot (with the label side up) and the player will automatically pull the disc into position. NOTE DO NOT INSERT TWO DISCS INTO THE DISC INSERTION SLOT AT A TIME. & How to insert a CD(s) (type B) 1. Briefly press the “LOAD” button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink. If no indicator blinks, it means that there is Black plate (205,1) Audio 5-15 no idle position in the magazine. 2. When the “LOAD” indicator flashes, insert the disc. Once you have inserted the disc, the “LOAD” indicator will go off. The disc will then be automatically drawn in, and the player will begin to play back the first track of the disc. . To insert more discs in succession, repeat Steps 1 and 2. The magazine will be loaded with discs in the ascending order of position number. If you do not insert any disc in 15 seconds after you have pressed the “LOAD” button, the player will begin to play back the first track of the last disc you have inserted. . The disc indicator steadily lights up if a disc is already inserted in the correspond- ing position of the magazine. . While the player is in the loading mode, if you press “FM AM”, “SAT” or “AUX” button, the player will enter the standby mode. Press the “CD” button to start playback. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 5-16 Audio ! Inserting a disc in a desired posi- tion 1. Briefly press the “LOAD” button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink. The positions in the magazine the indica- tor of which steadily lights up are already loaded with discs. Black plate (206,1) Press the “CD” button to start playback. ! Loading all the magazine (Full disc loading mode) 2. Press the disc select button at the position where you want to insert a disc. 3. When the “LOAD” indicator flashes, insert the disc. Once you have inserted the disc, the “LOAD” indicator will go off. The disc will then be automatically drawn in, and the player will begin to play the first track on the disc. . If you wish to insert another disc, repeat the procedure beginning with step 1. If you do not insert any disc in 15 seconds after you have pressed the “LOAD” button, the player will begin to play back the first track of the last disc you have inserted. . While the player is in the loading mode, if you press “FM AM”, “SAT” or “AUX” button, the player will enter standby mode. If you continue to press the “LOAD” 1. button for more than 1.5 seconds, the player will produce beep sound and will enter the full disc loading mode. 2. When the disc number indicator and “ALL LOAD” indicator start flashing, insert a disc within 15 seconds. If a disc is successfully loaded during this period, the disc number indicator will stop blinking and will steadily light. 3. When the loading of a disc is com- plete, the next disc number indicator will blink. Then repeat Step 2. 4. When the magazine is filled with discs by repeating Steps 2 and 3, the player will 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 start playback of the discs, beginning with the one inserted first. If you fail to insert any disc during each 15 seconds interval, the full disc loading mode will be canceled, and the player will start playback of the disc inserted first. & How to play back a CD ! When there is no CD inserted Insert a CD by referring to “How to insert a CD (type A)” / “How to insert a CD(s) (type B)”. When a CD is loaded, the player will start playback of the CD, beginning with the first track. ! When CD is in the player (type A) When the “CD” button is pressed, the Black plate (207,1) Audio 5-17 player will start playback. ! When there are CDs loaded (type B) & To select a track from its beginning ! Forward direction Press a desired one of the disc select buttons the disc number indicator of which steadily lights up. The player will then start playback of the selected CD, beginning with the first track. If a disc that the player cannot read has been loaded, the player will display the message “CHECK DISC”. Briefly press the “ ” side of the TUNE/ TRACK button to skip to the beginning of the next track/file (track). Each time the button is pressed, the indicated track/file (track) number will increase. NOTE In an MP3 or WMA folder, skipping past the last track/file (track) will take you back to the first track/file (track) in the folder. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (208,1) 5-18 Audio ! Backward direction & Fast-forwarding and fast-re- versing ! Fast-reversing ! Fast-forwarding Briefly press the “ ” side of the TUNE/ TRACK button to skip to the beginning of the current track/file (track). Each time the button is pressed, the indicated track/file (track) number will decrease. NOTE In an MP3 or WMA folder, skipping past the first track/file (track) will take you to the last track/file (track) in the folder. Press the “ ” side of the TUNE/TRACK button continuously to fast-reverse the disc/folder. Release the button to stop fast-reversing. NOTE If you fast-reverse to the beginning of the first track/file (track), fast-reversing will stop and the player will start play- back. Press the “ ” side of the TUNE/TRACK button continuously to fast-forward the disc/folder. Release the button to stop fast-forwarding. NOTE If you fast-forward to the end of the last track/file (track), fast-forwarding will stop and the player will start playback beginning with the first track/file (track). 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 & Repeating ! To repeat the currently playing track/file (track) To repeat a track/file (track), briefly press the “RPT” button while the track/file (track) is playing. The display will show “RPT”, and the track/file (track) will be repeated. To cancel the track/file (track) repeat-play mode, briefly press the “RPT” button twice. The “RPT” indication will go off, and the normal playback mode will be resumed. NOTE . Each time you briefly press the button, the mode will change to the next one in the following sequence. If you accidentally press the button and cancel the track/file (track) repeat-play mode, press it again to reselect the repeat-play mode. . The repeat-play mode will be can- celled if you perform any of the follow- ing steps: ” or “ ” button . Press the “RPT” button . Press the “ . Press the disc select button . Select the radio or AUX mode . Press the “ ” side of the SEEK/SCAN button on folder re- peating (MP3 or WMA disc) . Press the “LOAD” button when there is free space in the CD magazine. . Turn off the power of the audio equipment. . Turn the ignition switch to the “OFF” position. Black plate (209,1) Audio 5-19 ! To repeat the currently playing disc/ folder the disc/folder To repeat the currently playing disc/folder, press the “RPT” button twice while a track/ file (track) is playing. The display will show “D-RPT” for non-MP3/WMA disc, “F-RPT” for MP3/WMA folder. And the disc/folder will be played repeatedly. To cancel repeat play mode, press the “RPT” button once more. The “D-RPT” or “F-RPT” indication will go off, and the normal playback mode will be resumed. NOTE . Each time you briefly press the button, the mode will change to the next one in the following sequence. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 5-20 Audio & Random playback If you accidentally press the button and cancel the disc/folder repeat-play mode, press it again to reselect the disc/folder repeat-play mode. . For MP3 and WMA discs, they can play back repeatedly only for the currently playing file folder. They can- not play back the whole disc. . The disc/folder repeat-play mode will be cancelled if you perform any of the following steps: ” button . Press the “RPT” button . Press the “ . Press the disc select button . Select the radio or AUX mode . Press the “ ” side of the SEEK/SCAN button in the folder repeating mode “F-RPT” . Turn off the power of the audio equipment. . Turn the ignition switch to the “OFF” position. ” or “ ! Non-MP3/WMA disc Press the “RPT” button for 0.5 second or longer during disc playback to play all of the tracks on the disc in a random order. The display will show “RDM”, and all of the tracks on the disc will be played in a random order. To cancel random playback, press the “RPT” button again for at least 0.5 second. The “RDM” indication will go off, and the normal playback mode will be resumed. NOTE Random playback will be cancelled if you perform any of the following steps: . Press the “RPT” button . Press the “ ” button Black plate (210,1) . Press the disc select button . Select the radio or AUX mode . Press the “LOAD” button when there is free space in the CD magazine. . Turn off the audio equipment. . Turn the ignition switch to the “OFF” position. the power of ! MP3/WMA disc Press the “RPT” button for 0.5 second or longer during disc playback to play all of the tracks in the folder currently being played in random order. The display will show “F-RDM” during the folder random mode. Press the “RPT” button again for 0.5 second or longer to play all of the tracks on the disc in random order. The display will show “D-RDM” during the disc random mode. To cancel the random mode, press the “RPT” button for 0.5 second or longer during “D-RDM” random playback. The “D-RDM” indication will go off, and the normal playback mode will be resumed. NOTE . Each time you press the button for 0.5 second or longer, the mode will change to the next one in the following sequence. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 ” or “ If you accidentally press the button and cancel the random mode, press it again to reselect the random mode. . Random playback will be cancelled if you perform any of the following steps: . Press the “RPT” button . Press the “ ” side of the SEEK/SCAN button in the folder ran- dom mode “F-RDM” . Press the “ . Press the disc select button . Select the radio or AUX mode . Press the “LOAD” button when there is free space in the CD magazine. . Turn off the audio equipment. . Turn the ignition switch to the “OFF” position. the power of ” button & Scan ” side of The scan mode lets you listen to the first 10 seconds of each track/file (track) in succession. Press the “ the SEEK/SCAN button for 0.5 second or longer to start scanning upward beginning with the track/file (track) following the currently selected one. Press the “ ” side of the button to start scanning down- ward beginning with the track/file (track) preceding the currently selected one. After all tracks/files (tracks) in the disk/ folder have been scanned, normal play- back will be resumed. To cancel the scan mode, press the “ ” side of the button for 0.5 second or longer. ” or “ Black plate (211,1) Audio 5-21 ” or “ ” or “ ” side of the NOTE The scan mode will be cancelled if you perform any of the following steps: . Press the “RPT” button . Press the “ TUNE/TRACK button . Press the “ SEEK/SCAN button . Press the “ . Press the disc select button . Select the radio or AUX mode . Press the “LOAD” button when there is free space in the CD magazine. . Turn off the audio equipment. . Turn the ignition switch to the “OFF” position. ” side of the the power of ” button – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (212,1) 5-22 Audio & Display selection ! Page (track/folder title) scroll & Folder selection If you press the “TEXT” button for 0.5 second or longer during playback of an MP3/WMA file, the indication will change to the next one in the following sequence. If, having pressed the “TEXT” button to select FOLDER NAME or FILE NAME display, you press the “TEXT” button again for at least 0.5 second, the title will be scrolled so you can see all of it. NOTE The display is designed to show titles for up to three pages (64 characters in total). However, it may in some cases show titles for only up to two pages (32 characters in total). the next ” side of the SEEK/SCAN Press the “ folder. button briefly to select Press the “ ” side of the button briefly to go back to the previous folder. The folder title will be shown each time you press one of the buttons. NOTE . Selecting folders in this way is possible only within a single disc. . Only MP3/WMA folders are recog- nized when an attempt to select the next or previous folder is made. If no appropriate folder exists on the disc, pressing the “ ” side of the SEEK/SCAN button starts playback beginning with the first track/file (track). ” or “ 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (213,1) Audio 5-23 & How to eject a CD from the player (type A) & How to eject CDs from the player (type B) ! Ejecting a CD from the player Of the discs loaded, you can select and remove only one disc. 2. Briefly press the “ ” button. The selected disc will be ejected. The disc number indicator will this time. When you remove the ejected disc, the disc number indicator will go off. flash at To remove more discs in succession, repeat Steps 1 and 2. 1. Use the disc select button to select the disc to be ejected. ”. The disc will be ejected. When a disc is being played back or when a disc is in the player, press the eject button “ NOTE . Avoid driving the vehicle with a CD sticking out, because vibration might make it fall out. . If the disc is left ejected for more than approximately 15 seconds after the ignition switch is turned to the “OFF” position, a disc protection func- tion will operate, automatically reload- ing the disc. In this case, the disc is not played. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 5-24 Audio ! Ejecting all discs from the player (All disc ejection mode) If you continue to press the “ ” 1. button, the player will produce beep sound and will enter the all disc ejection mode. At this time, the disc number indicator and “ALL EJECT” indicator will flash. 2. Remove the disc that has been ejected. The other discs loaded will then be ejected one after another. If you do not remove the disc that has been ejected, the “All disc ejection mode” will be canceled. NOTE . Avoid driving the vehicle with a CD sticking out, because vibration might make it fall out. . If you press the “ ” button while the player is in all disc ejection mode, the mode will be cancelled following ejection of the disc that is currently being ejected. . If you press the “CD” button or “LOAD” button while the player is in all disc ejection mode, the player will draw in the discs that have been ejected and play them. & When the following mes- sages are displayed If one of the following messages is displayed while operating the CD player, determine the cause based on the follow- ing information. If you cannot clear those messages, please contact your SUBARU dealer. ! When “PUSH EJECT” is displayed This message means that there is a mechanical error. Depress the eject button to unload the disc. Check the disc for damage or deformation, and also check that the correct disc is inserted. Do not try to unload the disc forcibly. Single CDs (i.e., 8 cm/3 inch CDs) are not supported, and if inserted, they will be immediately ejected and this error message will be displayed. If the disc cannot be unloaded or the error message remains displayed, please contact your SUBARU dealer. Black plate (214,1) ! When “CHECK DISC” is displayed Press the eject button to unload the discs. Check that the disc is not damaged or scratched, and also check that the disc is inserted correctly. Some CD-RW discs may be causing this error message to appear. Check that the disc type (i.e., 8 cm/3 inch CDs are not supported) and data format are correct. This player can only play MP3 and WMA data formats. If the disc cannot be unloaded or the error message remains displayed, please con- tact your SUBARU dealer. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 AUX unit operation & AUX jack & AUX inputs selection button By connecting a commercial audio pro- duct to the vehicle, such as portable audio player, you can hear its sound via the vehicle’s speaker. Connect push the “AUX” button. For the audio input jack, a stereo mini pin plug (3.5ø) can be connected. For detailed information, see the owner’s manual of the portable audio player. the portable audio player and Press the “AUX” button when the auxiliary audio input is off to turn on the auxiliary audio input. NOTE . The output sound of the portable audio player is not loud, and the sound via the vehicle’s speakers that are connected to the vehicle audio set is very small. If you turn up the volume of the audio set, the volume becomes louder. However, when you change the player to the other portable audio player, the sound may become a lot louder. Turn down the volume when you change between them. . In some cases, when the sound volume of the portable audio player is Black plate (215,1) Audio 5-25 low, the sound becomes bad when you turn up the volume of the vehicle audio system. In this case, adjust the sound volume of the portable audio player. . In some cases, noise occurs be- cause of a bad connection between the portable player of the vehicle audio system or for the player. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (216,1) 5-26 Audio Audio control buttons (if equipped) These buttons are located on the spokes of the steering wheel. They allow the driver to control audio functions without taking his/her hands off the steering wheel. & MODE button *1: The frequency last received in the selected waveband will be displayed. *2: Only when a CD is in the player. *3: Only when with an auxiliary audio product is connected. ! “ ” and “ ” buttons (track) order. The track/file (track) number will be shown on the audio display. ! With SAT mode selected Press the “ ” button to skip forward in the channel order. Press the “ ” button to skip backward in the channel order. The channel will be shown on the audio display. ! Volume control buttons This button is used to select the desired audio mode. Each time it is pressed, the mode changes to the next one in the following sequence: ” button or “ ! With radio mode selected Press the “ ” button. The radio will seek the next receivable station and stop on it. That station’s frequency will be shown on the audio display. ! With CD mode selected Press the “ ” button to skip forward in the track/file (track) order. Press the “ ” button to skip backward in the track/file Press the “+” button to increase the volume. Press the “−” button to reduce the volume. A number indicating the volume will be shown on the audio display. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 ! MUTE button Precautions to observe when handling a compact disc Use only compact discs (CDs, CD-Rs and CD-RWs) that have the mark shown in the following. Also, some compact discs cannot be played. Press this button if you wish to immedi- ately cut the volume to zero. The audio display will show “MUTE”. If you press the button again, the original return and “MUTE” sound volume will goes off. Black plate (217,1) Audio 5-27 – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 there are deposits, wipe the disc surface from the center outward with a dry, soft cloth. Be sure not to use a hard cloth, thinner, benzene, alcohol, etc. . Do not use any disc that is scratched, deformed, or cracked. Also, do not use any disc that has a non-standard shape (for example, a heart shape). Malfunctions or problems might result. . A disc is vulnerable to heat. Never keep it either in places exposed to direct sunlight, near heaters or in vehicles parked in the sun or on hot days. 5-28 Audio If . You cannot use a DualDisc in the CD player. If you insert a DualDisc into the player, the disc may not come out again, possibly causing the player to malfunction. . In cold and/or rainy weather, dew can form inside the CD player, preventing normal operation. this happens, eject the CD and wait for the player to dry out. . Skipping may occur when the CD player is subjected to severe vibration (for example, when the vehicle is driven on a rough surface). . To remove a disc from the case, press the center of the case and hold both edges of the disc. If the disc surface is touched directly, contamination could cause poor tone quality. Do not touch the disc surface. . Use a clean disc whenever possible. If Black plate (218,1) 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (11,1) Interior equipment 6-2 Interior light ......................................................... 6-2 Dome light .......................................................... 6-2 Cargo area light (Station wagon).......................... 6-2 Map light .............................................................. 6-3 Sun visors ........................................................... 6-3 Sun visor extension plate .................................... 6-4 Vanity mirror with light ........................................ 6-4 Storage compartment ......................................... 6-5 Glove box ........................................................... 6-5 Center console box ............................................. 6-6 Center panel compartment (if equipped)............... 6-7 Overhead console (if equipped) ........................... 6-7 Pocket ................................................................ 6-7 Cup holder ........................................................... Front passenger’s cup holder .............................. 6-8 Rear passenger’s cup holder ............................... 6-8 Accessory power outlets.................................... 6-8 Coat hook ........................................................... 6-10 Rear passenger area .......................................... 6-10 Shopping bag hook............................................ 6-11 6-11 6-11 Floor mat ............................................................ 6-12 Cargo area cover (Station wagon) .................... 6-12 Using the cover.................................................. 6-12 For Sedan models .............................................. For Station wagon models.................................. To remove the cover housing............................. To remove the rear gate board ........................... Stowage of the cargo area cover and rear gate board .............................................................. To install the cover housing ............................... To install the rear gate board ............................. Stowage boxes (Station wagon) ....................... Convenient tie-down hooks (if equipped) ........ Under-floor storage compartment .................... Sedan................................................................ Station wagon ................................................... HomeLink® Wireless Control System (if equipped) .................................................... Garage door opener programming in the U.S.A............................................................... Programming rolling-code-protected garage door openers in the U.S.A. ....................................... Programming for entrance gates and garage door openers in Canada........................................... Programming other devices ............................... Operating the HomeLink® Wireless Control System............................................................ Reprogramming a single HomeLink® button ............................................................. Erasing HomeLink® button memory ................... In case a problem occurs................................... 6-13 6-13 6-13 6-14 6-15 6-15 6-16 6-16 6-17 6-17 6-17 6-18 6-19 6-20 6-21 6-21 6-21 6-21 6-21 北米Model "A2420BE-B" EDITED: 2006/ 7/ 31 Black plate (222,1) 6-2 Interior equipment Interior light When leaving your vehicle, make sure the light to avoid battery dis- charge. is turned off & Dome light Map light stays on can be changed by a SUBARU dealer. Contact the nearest SUBARU dealer for details. : The light stays off. & Cargo area light (Station wa- gon) The light switch has three positions: : The light stays on continuously. Middle position: The light comes on when any door is opened. The light remains on for several seconds and gradually goes out after all doors are closed. The light also can be turned on by use of the remote keyless entry transmitter. See the “Remote keyless entry system” sec- tion in chapter 2 for detailed information. The setting of the period for which the light The cargo area light switch has three positions: DOOR: The light comes on only when the rear gate is opened. Middle position: The light stays off. : The light stays on continuously. Vehicle with moonroof (Sedan) Vehicle with moonroof (Station wagon) 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (223,1) Sun visors & Sun visor extension plate Interior equipment 6-3 Vehicle without moonroof To turn on the map light, push the switch. To turn it off, push the switch again. When leaving the vehicle, make sure the light to avoid battery dis- charge. is turned off To block out glare, swing down the visors. To use the sun visor at a side window, swing it down and move it sideways. With the sun visor positioned over the side window, you can use the sun visor extension plate to prevent glare through the gap between the sun visor and center pillar. To use the extension plate, pull it toward the rear of the vehicle. When you have finished using it, stow it by pushing it toward the front of the vehicle. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (224,1) 6-4 Interior equipment & Vanity mirror with light Storage compartment CAUTION Do not pull out the extension plate with the sun visor positioned over the windshield. The extension plate would obstruct your view of the rearview mirror. CAUTION Keep the vanity mirror cover closed while the car is being driven to avoid dazzle. CAUTION . Always keep the storage com- partment closed while driving to reduce the risk of injury in the event of sudden stops or an accident. . Do not store spray cans, contain- ers with flammable or corrosive liquids or any other dangerous items in the storage compart- ment. To use the vanity mirror, swing down the sun visor and open the vanity mirror cover. The light beside the vanity mirror comes on when the ignition switch is either in the “ACC” or “ON” position and the mirror cover is opened. NOTE Use of the vanity mirror light for a long period of time while the engine is not running can cause battery discharge. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 & Glove box & Center console box Center console box (front) To use as storage space: Black plate (225,1) Interior equipment 6-5 Lock 1) 2) Unlock To open the glove box, pull the handle. To close it, push the lid firmly upward. To lock the glove box, insert the key and turn it clockwise. If you remove the divider plate from the dual cupholders, you can use the center console box as a storage space. Slide the sliding lid (near the parking brake lever) toward the rear. Grasp the dual cupholders’ divider plate at the base. Turn it counterclockwise to remove it. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (226,1) 6-6 Interior equipment CAUTION Center console box (rear) If you hold the divider plate at the top while turning it counterclock- wise, it may break. To use again as cupholders: To open the center panel compartment, pull up the edge of the bottom of the panel lid. Pull up the lock release knob at the bottom of the front edge of the lid. & Center panel compartment (if equipped) CAUTION When your vehicle is parked in the sun or a warm day, the inside of the center panel heats up. Avoid storing plastic or other heat-vulnerable or flammable articles such as a lighter in the center panel. Insert the protrusion on the back of the divider plate into the hole in the center of the console box. Grasp the divider plate at the base, and turn it clockwise to fit it. CAUTION If you hold the divider plate at the top while turning it clockwise, it may break. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 & Overhead console (if equipped) & Pocket Cup holder Black plate (227,1) Interior equipment 6-7 To open the console, push on the lid lightly and it will automatically open. CAUTION When your vehicle is parked in the sun or on a warm day, the inside of the overhead console heats up. Avoid storing plastic or other heat- vulnerable or flammable articles such as a lighter in the overhead console. CAUTION Do not use the pocket as an ashtray or leave a lighted cigarette in the pocket. This could cause a fire. To use the pocket, push lightly on the lid below the climate controls. CAUTION . When not in use, always keep the cup holder stored while driving to reduce the risk of injury in the event of a sudden stop or an accident. . Do not pick up a cup from the cup holder or put a cup in the holder while you are driving, as this may distract you and lead to an accident. . Take care to avoid spills. Bev- erages, if hot, might burn you or your passengers. Spilled bev- erages may also damage uphols- tery or carpets. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (228,1) 6-8 Interior equipment & Front passenger’s cup holder & Rear passenger’s cup holder Accessory power outlets The dual cup holder is built into the center console near the parking brake lever. Outlet beside front pocket To access the cup holder, pull toward the rear. the lid The rear passenger’s cup holder is located on the lower side of the back of the center console. To use the cup holder, open the lid by pulling its upper edge. Outlet in center console 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 or more outlets simultaneously, the total power consumed by them must not exceed 120W. CAUTION . Do not attempt to use a cigarette lighter in the accessory power outlet. . Do not place any foreign objects, especially metal ones such as coins or aluminum foil, into the accessory power outlet. That could cause a short circuit. Al- ways put the cap on the acces- sory power outlet when it is not in use. . Use only electrical appliances which are designed for 12V DC. The maximum power rating of an appliance that can be connected varies among outlets as shown in the following. Do not use an appliance which exceeds the in- dicated wattage for each outlet. Outlet beside front pocket: 80W or less Outlets in center console and cargo area: 120W or less When using appliances con- nected to two or more outlets Outlet in cargo area (12V DC) Accessory power outlets are provided beside the front ashtray, in the center console and in the cargo area. Electrical power from the battery is available at any of the outlets when the ignition switch is in either the “ACC” or “ON” position. You can use an in-car electrical appliance by connecting it to an outlet. The maximum power rating of an appli- ance that can be connected varies among outlets as shown in the following. Do not use an appliance which exceeds the indicated wattage for each outlet. Outlet beside front pocket: 80W or less Outlets in center console and cargo area: 120W or less When using appliances connected to two Black plate (229,1) Interior equipment 6-9 simultaneously, the total power consumed by them must not exceed 120W. Overloading the accessory power outlet can cause a short circuit. Do not use double adapters or more than one electrical appliance. . If the plug on your electric appli- ance is either too loose or too tight for the accessory power outlet, this can result in a poor contact or cause the plug to get stuck. Only use plugs that fit properly. . Use of an electric appliance in the accessory power outlet for a long period of time while the engine is not running can cause battery discharge. . Before driving your vehicle, make sure that the plug and the cord on your electrical appliance will not interfere with your shifting gears and operating the accel- erator and brake pedals. If they do, do not use the electrical appliance while driving. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 6-10 Interior equipment Coat hook & Rear passenger area NOTE When the lid of the center console is closed, a gap remains between the center console and the lid to allow the power outlet in the center console to be used. Pass the electrical appliance’s cord through this gap. Black plate (230,1) WARNING Do not hang coat hangers or other hard or pointed objects on the coat hooks. If such items were hanging on the coat hooks during deploy- ment of the SRS curtain airbags, they could cause serious injuries by coming off the coat hooks and being thrown through the cabin or by preventing correct airbag deploy- ment. Before hanging clothing on the coat hooks, make sure there are no pointed objects in the pockets. Hang clothing directly on the coat hooks without using hangers. CAUTION Never hang anything on the coat hook that might obstruct the driver’s view or that could cause injury in sudden stops or in a collision. And do not hang items on the coat hook that weigh 11 lbs (5 kg) or more. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 Black plate (231,1) Shopping bag hook & For Station wagon models Interior equipment 6-11 CAUTION Do not hang items on the shopping bag hook that weigh 11 lbs (5 kg) or more. & For Sedan models The coat hook is attached to each rear passenger’s hand grip. A shopping bag hook is attached to each side of the cargo area. To use the hook, push the upper portion and the shopping bag hook will appear. A shopping bag hook is attached to each inner side wall of the trunk near the trunk lid opening. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 6-12 Interior equipment Floor mat A retaining pin is located on the driver’s side of the vehicle next to the fuel filler door release. Fit the grommet in the carpet onto the pin to prevent the carpet from moving. CAUTION Make sure the driver’s floor mat is placed back in its proper location and correctly secured on its retain- ing pin. If the floor mat slips forward and interferes with the movement of the pedals during driving, it could cause an accident. Black plate (232,1) Cargo area cover (Station wagon) The cargo area cover is provided for covering the cargo area and to protect its contents from direct sunlight. This cover is detachable to make room for additional cargo. & Using the cover To extend the cover, pull the end of the cover out of the housing, then insert its hooks into the catches as shown. To rewind it, unhook it from the catches and it will rewind automatically. You should hold on to the cover and guide it back into the cover housing while it is rewinding. 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 & To remove the rear gate board WARNING Do not place anything on the ex- tended cover. Putting excessive weight on the extended cover can break it and an object on the cover could tumble forward in the event of a sudden stop or collision. This could cause serious injury. & To remove the cover housing 1. Rewind the cover. 1. Remove the top of the rear gate board from the groove in the rear gate panel. 2. Hold down the button on the right- hand rear quarter panel and lift up the right-hand cover housing. 3. Remove the cover housing. 2. Hold both sides of the bottom edge of Black plate (233,1) Interior equipment 6-13 the rear gate board, rotate the rear gate board toward you, and pull it out down- ward. & Stowage of the cargo area cover and rear gate board The cargo area cover and rear gate board can be stowed in under the cargo floor. 1. To open the lid, pull the handle up. – CONTINUED – 北米Model "A2420BE-B" EDITED: 2006/ 7/ 26 6-14 Interior equipment Black plate (234,1) & To install the cover housing 2. To keep the lid open, hang the hook (provided on the back of the lid) on the rear edge of the roof. 3. Remove the left and right parts of the cargo floor lid. 4. Stow the cover housing and rear gate board in the cargo area end. To install the cover housing, insert both ends of the cover housing into the retainers.

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2007 Subaru Legacy Owners Manual