2012 Subaru Impreza Owners Manual

Download PDF Manual
Beep Return Top Display Cons Eco History Triple Meter Clock Bypass Screen Languages Return Set and adjust the time and date. 12h or 24h format can be selected. Set a birthday. Set an anniversary day. Return to the top menu. Adjust the brightness. Adjust the contrast. Turn the screen on or off. +5 ↔ −5 +5 ↔ −5 On or Off Adjust the beep sound volume. High, Low or Off Return to the top menu. Set and customize the top display informa- tion contents. Avg Cons, Inst Cons, Range or Off Customize the fuel consumption information display. Set and customize the time of logging fuel consumption history. 30 min, 60 min or 120 min Set and customize the triple meter. Select the clock format. Analog, Digital or Off Set the bypass screen for each item. On or Off Select the display language. English or French Return to the top menu. Page 3-37 3-38 3-39 — 3-41 3-42 3-42 3-43 — 3-44 3-45 3-46 3-48 3-49 3-50 3-51 — – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (158,1) 3-36 Instruments and controls Top menu Maintenance Menu option Description Engine Oil Oil Filter Tires Set and adjust the oil maintenance notification date. Set and adjust the oil filter maintenance notification date. Set and adjust the tire maintenance notification date. Maintenance Schedule Set and adjust the vehicle maintenance notification date. On/Off Clear All Settings Return Driving History Set Turn on or off the self-check screen that is activated when the ignition switch is turned to the “ON” position. Clear all settings for maintenance items. On or Off Yes or No Return to the top menu. Register and overwrite the driving record. Return Return to the top menu. Car Setting Hazard Warning Flasher Set the hazard warning flasher. On or Off Defogger Interior Light Auto Light Sensor (models with auto on/off head- lights) Set and customize the operation of the defogger. 15 minutes or Continuous Set and customize the interior light off delay timer. 10, 20, 30 seconds or Off Set and customize the sensitivity of the auto light sensor. Low, Mid, High or Max Return Return to top menu. Initialize Reset to Defaults Reset all settings to the default settings. Yes or No Lifetime Fuel Consumption Reset Clear logged lifetime fuel consumption data. Yes or No Return Return — Return to the top menu. Return to the top menu. Page 3-52 3-53 3-53 3-53 3-53 3-54 — 3-55 — 3-57 3-58 3-59 3-60 — 3-62 3-63 — — 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (159,1) Instruments and controls 3-37 ” or “ ” switch. & Date and time settings The items in the date and time settings can be set. To change the items, operate the “ NOTE . The “Date” item must be set to display the “Birthday”, “Anniversary” and notifications for vehicle mainte- nance. . The “Birthday” and “Anniversary” items can be entered after the “Date” item has been set. ! Preparation for date setting 1. Turn the ignition switch to the “ON” /SET” switch position and pull toward you for more than 2 seconds. the “ operate the “ “Date” item. Then, pull the “ toward you. ” or “ ” switch to show the /SET” switch ! Current date and time setting 1. Perform the preparation steps accord- ing to “Preparation for date setting” F3- 37. 3. Select the item to set by operating the “ SET” switch toward you. ” switch, and then pull the “ ” or “ 2. Operate the “ ” switch to select the “Date” item, and then pull the “ /SET” switch toward you. ” or “ 2. After the selection screen is displayed, 4. Select a number by operating the “ or “ switch toward you. ” switch, and then pull the “ ” /SET” – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (160,1) 3-38 Instruments and controls seconds. ! Birthday setting 1. Perform the preparation steps accord- ing to “Preparation for date setting” F3- 37. 5. After entering the date and time, select “Set” by operating the “ ” switch and confirm the setting by pulling the “ /SET” switch toward you. 6. The system will notify you that the setting is complete for approximately 3 2. Operate the “ ” switch to select the “Birthday” item, and then pull the “ /SET” switch toward you. ” or “ 3. Select the item to set by operating the “ SET” switch toward you. ” switch, and then pull the “ ” or “ 4. Select numbers by operating the “ or “ switch toward you. ” switch, and then pull the “ ” /SET” 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (161,1) Instruments and controls 3-39 seconds. If a birthday is approaching, the following screen will be displayed accompanied by a beep when the ignition switch has been turned to the “ON” position. 5. After entering the date by repeating step 4, select “Set” by operating the “ ” switch and confirm the setting by pulling the “ /SET” switch toward you. From 1 to 7 days prior to the birthday 6. The system will notify you that the setting is complete for approximately 3 On a birthday NOTE If “_ _” is selected for either the “Month” or “Day” item instead of numbers, the birthday notification is deactivated. ! Anniversary setting 1. Perform the preparation steps accord- ing to “Preparation for date setting” F3- 37. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-40 Instruments and controls ” switch to the “Anniversary” item, and then ” or 2. Operate the “ select pull the “ /SET” switch toward you. “ Black plate (162,1) the “ /SET” switch toward you. 6. The system will notify you that the setting is complete for approximately 3 seconds. If an anniversary is approaching, the following screen will be displayed accom- panied by a beep when the ignition switch has been turned to the “ON” position. 4. Select numbers by operating the “ or “ switch toward you. ” switch, and then pull the “ ” /SET” 3. Select the item to set by operating the “ SET” switch toward you. ” switch, and then pull the “ ” or “ 5. After entering the date by repeating step 4, select “Set” by operating the “ ” switch and confirm the setting by pulling 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 NOTE If “_ _” is selected for either the “Month” or “Day” item instead of numbers, the anniversary notification is deactivated. ! Clearing birthday or anniversary 1. Perform the preparation steps accord- ing to “Preparation for date setting” F3-37 and display “Birthday” or “Anniversary” on the screen. 2. When “_ _” is selected for either the “Month” or “Day” item instead of numbers, the setting of “Birthday” or “Anniversary” is cleared. & Image quality and volume settings From 1 to 7 days prior to the anniversary The items in the image quality and volume settings can be set. To change the items, operate the “ ! Preparation for image quality and ” switch. ” or “ volume settings On an anniversary 1. Turn the ignition switch to the “ON” /SET” switch position and pull toward you for more than 2 seconds. the “ Black plate (163,1) Instruments and controls 3-41 2. After the selection screen is displayed, operate the “ ” switch to show the “Display” item. Then, pull /SET” switch toward you. the “ ” or “ ! Brightness setting 1. Perform the preparation steps accord- ing to “Preparation for image quality and volume settings” F3-41. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-42 Instruments and controls toward you. ! Contrast setting 1. Perform the preparation steps accord- ing to “Preparation for image quality and volume settings” F3-41. 2. Operate the “ ” switch to select the “Brightness” item, and then pull the “ /SET” switch toward you. ” or “ 2. Operate the “ ” switch to select the “Contrast” item, and then pull the “ /SET” switch toward you. ” or “ 3. Select a brightness level by operating the “ ” switch, and confirm the setting by pulling the “ /SET” switch ” or “ Black plate (164,1) 3. Select a contrast level by operating the “ ” switch, and confirm the setting by pulling the “ /SET” switch toward you. ” or “ ! Screen OFF setting 1. Perform the preparation steps accord- ing to “Preparation for image quality and volume settings” F3-41. 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (165,1) Instruments and controls 3-43 2. Operate the “ ” switch to select the “Volume” item, and then pull the “ /SET” switch toward you. ” or “ 3. Pull the “ /SET” switch toward you. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 2. Operate the “ ” switch to select the “Screen OFF” item, and then pull the “ /SET” switch toward you. ” or “ 3. Pull toward you. the “ /SET” switch once more 4. The screen is turned off. ”, “ ” or “ Restoring the screen When the “ /SET” switch is pulled toward you after the ignition switch is turned to the “ON” position, the screen will be restored. The screen is restored with the basic screen that was displayed when the screen was turned off. While the screen is off, a warning message will be displayed if necessary, but other screens are not displayed. ! Beep volume setting 1. Perform the preparation steps accord- ing to “Preparation for image quality and volume settings” F3-41. 3-44 Instruments and controls Black plate (166,1) 4. Select an item by operating the “ “ switch toward you. ” switch, and then pull the “ ” or /SET” 6. The system will notify you that the setting is complete for approximately 3 seconds. ” switch, and then pull the “ & Screen settings The items in the screen settings can be set. To change the items, operate the “ ” or “ /SET” switch toward you. ! Preparation for screen settings 1. Turn the ignition switch to the “ON” /SET” switch position and pull toward you for more than 2 seconds. the “ “Set” by operating the “ ” 5. Select switch, and confirm the setting by pulling the “ /SET” switch toward you. 2. After the selection screen is displayed, operate the “ ” switch to show the “Screen Setting” item. Then, pull the “ SET” switch toward you. ” or “ ! Top display setting 1. Perform the preparation steps accord- ing to “Preparation for screen settings” F3-44. 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (167,1) Instruments and controls 3-45 ” or /SET” 6. The system will notify you that the setting is complete for approximately 3 seconds. ! Fuel consumption screen setting 1. Perform the preparation steps accord- ing to “Preparation for screen settings” F3-44. 4. Select an item by operating the “ “ switch toward you. ” switch, and then pull the “ 2. Operate the “ ” switch to select the “Top Display” item, and then pull the “ /SET” switch toward you. ” or “ 3. Pull the “ /SET” switch once more. “Set” by operating the “ ” 5. Select switch, and confirm the setting by pulling the “ /SET” switch toward you. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-46 Instruments and controls Black plate (168,1) 2. Operate the “ ” switch to select the “Cons” item, and then pull the “ /SET” switch toward you. ” or “ 4. Select the displayed configuration by operating the “ ” switch, and then pull the “ /SET” switch toward you. ” or “ 3. Pull the “ /SET” switch once more. “Set” by operating the “ ” 5. Select switch, and confirm the setting by pulling the “ /SET” switch toward you. 6. The system will notify you that the setting is complete for approximately 3 seconds. ! Economy history setting 1. Perform the preparation steps accord- ing to “Preparation for screen settings” F3-44. 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (169,1) Instruments and controls 3-47 “Set” by operating the “ ” 6. Select switch and confirm the setting by pulling the “ /SET” switch toward you. the time of 4. Select the logged fuel consumption history by operating the “ SET” switch toward you. ” switch, and then pull the “ ” or “ 2. Operate the “ ” switch to select the “Eco History” item, and then pull the “ /SET” switch toward you. ” or “ 3. Pull the “ /SET” switch once more. 5. Select “Return” by operating the “ switch. ” 7. The system will notify you that the setting is complete for approximately 3 seconds. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (170,1) 3-48 Instruments and controls ! Triple meter setting 1. Perform the preparation steps accord- ing to “Preparation for screen settings” F3-44. 2. Operate the “ ” switch to select the “Triple Meter” item, and then pull the “ /SET” switch toward you. ” or “ ” or “ 3. Select the setting location (left, center or right) by operating the “ ” switch, and then pull the “ /SET” switch toward you. NOTE The same item cannot be selected for the left, center or right location. ” or “ 4. Select the preferred item by operating the “ ” switch, and then pull the “ If you also want to change the setting for another location, repeat steps 3 and 4. /SET” switch toward you. 5. Select “Set” by operating the “ ” 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (171,1) Instruments and controls 3-49 4. Select a clock style by operating the “ /SET” switch toward you. ” switches and then pull the “ switch, and confirm the setting by pulling the “ /SET” switch toward you. 6. The system will notify you that the setting is complete for approximately 3 seconds. ! Clock screen setting 1. Perform the preparation steps accord- ing to “Preparation for screen settings” F3-44. 2. Operate the “ ” switch to select the “Clock” item, and then pull the “ /SET” switch toward you. ” or “ 3. Pull the “ /SET” switch once more. “Set” by operating the “ ” 5. Select switch, and confirm the setting by pulling the “ /SET” switch toward you. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-50 Instruments and controls 6. The system will notify you that the setting is complete for approximately 3 seconds. ! Bypass screen setting 1. Perform the preparation steps accord- ing to “Preparation for screen settings” F3-44. 2. Operate the “ ” switch to select the “Bypass Screen” item, and then pull the “ /SET” switch toward you. ” or “ Black plate (172,1) ” or “ ” switch, and pull the “ 4. Select “On” or “Off” by operating the “ /SET” switch toward you. If you want to change setting for another item, repeat steps 3 and 4. 3. Select the item to set by operating the “ SET” switch toward you. ” switches, and then pull the “ ” or “ 5. Select “Set” by operating the “ ” or 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 “ pulling the “ ” switch, and confirm the setting by /SET” switch toward you. Black plate (173,1) Instruments and controls 3-51 2. Operate the “ ” switch to select the “Languages” item, and then pull the “ /SET” switch toward you. ” or “ 6. The system will notify you that the setting is complete for approximately 3 seconds. ! Language setting 1. Perform the preparation steps accord- ing to “Preparation for screen settings” F3-44. 4. Select operating the “ pull the “ the preferred language by ” switch, and then ” or “ /SET” switch toward you. language setting is dis- 3. The current /SET” switch toward played. Pull you to enter the language selection mode. the “ “Set” by operating the “ ” 5. Select switch, and confirm the setting by pulling the “ /SET” switch toward you. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (174,1) 3-52 Instruments and controls 6. The system will notify you that the setting is complete for approximately 3 seconds. & Maintenance settings The items in the maintenance settings can be set. To change the items, operate the “ ! Preparation for maintenance set- ” switch toward you. ” or “ tings 1. Turn the ignition switch to the “ON” position, and then pull the “ /SET” switch toward you for more than 2 seconds. 2. After the selection screen is displayed, operate the “ ” switch to show the “Maintenance” item. Then, pull SET” switch toward you. the “ ” or “ 2. Operate the “ ” switch to select the “Engine Oil” item, and then pull the “ /SET” switch toward you. ” or “ ! Engine oil setting 1. Perform the preparation steps accord- ing to “Preparation for maintenance set- tings” F3-52. 3. Select the setting location (month, day, year or distance) by operating the “ ” or “ /SET” ” switch, and then pull the “ 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 switch toward you. ” or ” switch and confirm the setting by 5. Select “Set” by operating the “ “ pulling the “ /SET” switch toward you. ” switch, and then pull the “ 4. Select a number by operating the “ or “ switch toward you. If you also want to change the setting for another location, repeat steps 3 and 4. ” /SET” 6. The system will notify you that the setting is complete for approximately 3 seconds. NOTE . The notification is displayed with information of both date and distance or either date or distance in accor- dance with the setting . When “_ _” is selected for either the “Month”, “Day”, “Year” or “Distance” item instead of numbers, the set noti- fication is deactivated. . If the notification continues for 15 days or more, the system displays “_ _” on the screen. Black plate (175,1) Instruments and controls 3-53 . When the distance announcement reaches 0 km, the display will show “0000” for the next 500 km. After exceeding 500 km, “_ _ _ _” will be displayed. ! Oil filter setting The setting procedure is the same as “Engine oil setting” F3-52, but select the “Oil Filter” item in step 2. ! Tires setting The setting procedure is the same as “Engine oil setting” F3-52, but select the “Tires” item in step 2. ! Maintenance schedule setting The setting procedure is the same as “Engine oil setting” F3-52, but select the “Maintenance Schedule” item in step 2. ! On/Off setting 1. Perform the preparation steps accord- ing to “Preparation for maintenance set- tings” F3-52. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-54 Instruments and controls Black plate (176,1) 2. Operate the “ ” switch to select the “On/Off” item, and then pull the “ /SET” switch toward you. ” or “ 4. Select “On” or “Off” by operating the “ SET” switch toward you. ” switch, and then pull the “ ” or “ 3. The current setting is displayed. Pull the “ /SET” switch toward you to enter the selection mode. “Set” by operating the “ ” 5. Select switch, and confirm the setting by pulling the “ /SET” switch toward you. 6. The system will notify you that the setting is complete for approximately 3 seconds. ! Clear setting 1. Perform the preparation steps accord- ing to “Preparation for maintenance set- tings” F3-52. 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3 Black plate (177,1) Instruments and controls 3-55 & Driving history registration The items in the driving history can be registered. To change the items, operate the “ ” switch, and then pull the “ /SET” switch toward you. ” or “ 1. Turn the ignition switch to the “ON” position, and then pull the “ /SET” switch toward you for more than 2 seconds. 2. After the selection screen is displayed, operate the “ ” switch to show the “Driving History” item. Then, pull the “ SET” switch toward you. ” or “ – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 2. Operate the “ ” switch to select the “Clear All Settings” item, and then pull the “ /SET” switch toward you. ” or “ 4. Confirm the setting by pulling the “ SET” switch toward you. 3. The system displays “No” first. To clear all maintenance settings, select “Yes” by operating the “ ” switch. 5. The system will notify you that the setting is complete for approximately 3 seconds. 3-56 Instruments and controls 3. Pull the “ once more to enter the setting mode. /SET” switch toward you 5. Select one of the registration lines by operating the “ ” switch, and then pull the “ /SET” switch toward you. ” or “ Black plate (178,1) registered directly without a notification. 7. The system will notify you that the registration is complete for approximately 2 seconds. 4. The system will notify you of the place to be selected for approximately 2 sec- onds. 6. To overwrite the previous registration, pull the “ /SET” switch toward you. When registration is performed the first time, it is NOTE The driving history can be registered for the trip meter A or B. & Car settings The items in the car settings can be set. To change the items, operate the “ ” or “ /SET” switch toward you. ! Preparation for car settings 1. Turn the ignition switch to the “ON” position, and then pull the “ /SET” switch ” switch, and then pull the “ 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (179,1) Instruments and controls 3-57 toward you for more than 2 seconds. the selection mode. ” or 2. Operate the “ ” switch to select the “Hazard Warning Flasher” item, and then pull the “ /SET” switch toward you. “ 4. Select “On” or “Off” by operating the “ SET” switch toward you. ” switch, and then pull the “ ” or “ 2. After the selection screen is displayed, operate the “ ” switch to show the “Car Setting” item. Then, pull the “ /SET” switch toward you. ” or “ ! Hazard warning flasher setting 1. Perform the preparation steps accord- ing to “Preparation for car settings” F3-56. 3. The current setting is displayed. Pull the “ /SET” switch toward you to enter “Set” by operating the “ ” 5. Select switch, and confirm the setting by pulling – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-58 Instruments and controls the “ /SET” switch toward you. Black plate (180,1) the “ /SET” switch toward you. 6. The system will notify you that the setting is complete for approximately 3 seconds. If the setting is not available, the following notification will be displayed for approxi- mately 3 seconds. For more details, contact a SUBARU dealer. ! Defogger setting 1. Perform the preparation steps accord- ing to “Preparation for car settings” F3-56. 3. The current setting is displayed. Pull the “ /SET” switch toward you to enter the selection mode. 2. Operate the “ ” switch to select the “Defogger” item, and then pull ” or “ 4. Select the preferred setting by operat- ing the “ ” switch, and then pull ” or “ 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (181,1) Instruments and controls 3-59 the “ /SET” switch toward you. seconds. If the setting is not available, the following notification will be displayed for approxi- mately 3 seconds. For more details, contact a SUBARU dealer. “Set” by operating the “ ” 5. Select switch, and confirm the setting by pulling the “ /SET” switch toward you. 2. Operate the “ ” switch to select the “Interior Light” item, and then pull the “ /SET” switch toward you. ” or “ ! Interior light off delay timer setting 1. Perform the preparation steps accord- ing to “Preparation for car settings” F3-56. 6. The system will notify you that the setting is complete for approximately 3 3. The current setting is displayed. Pull the “ /SET” switch toward you to enter the selection mode. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-60 Instruments and controls Black plate (182,1) 4. Select the preferred setting by operat- ing the “ ” switch, and then pull the “ /SET” switch toward you. ” or “ 6. The system will notify you that the setting is complete for approximately 3 seconds. If the setting is not available, the following notification will be displayed for approxi- mately 3 seconds. For more details, contact a SUBARU dealer. ! Auto light sensor sensitivity setting 1. Perform the preparation steps accord- ing to “Preparation for car settings” F3-56. “Set” by operating the “ ” 5. Select switch, and confirm the setting by pulling the “ /SET” switch toward you. 2. Operate the “ ” switch to select the “Auto Light Sensor” item, and ” or “ 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 then pull the “ /SET” switch toward you. the “ /SET” switch toward you. 3. The current setting is displayed. Pull the “ /SET” switch toward you to enter the selection mode. “Set” by operating the “ ” 5. Select switch, and confirm the setting by pulling the “ /SET” switch toward you. 4. Select the preferred setting by operat- ing the “ ” switch, and then pull ” or “ 6. The system will notify you that the setting is complete for approximately 3 Black plate (183,1) Instruments and controls 3-61 seconds. If the setting is not available, the following notification will be displayed for approxi- mately 3 seconds. For more details, contact a SUBARU dealer. & Initialize Items that have been set to your pre- ference can be initialized. To select an initialization menu, operate the “ ” switch as follows. ! Preparation for initialization 1. Turn the ignition switch to the “ON” position, and then pull the “ /SET” switch toward you for more than 2 seconds. ” or “ – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-62 Instruments and controls Black plate (184,1) 2. After the selection screen is displayed, operate the “ ” switch to show the “Initialize” item. Then, pull /SET” switch toward you. the “ ” or “ 2. Operate the “ ” switch to select the “Reset to Defaults” item, and then pull the “ /SET” switch toward you. ” or “ 4. Confirm the setting by pulling the “ SET” switch toward you. ! Reset to factory default settings 1. Perform the preparation steps accord- ing to “Preparation for initialization” F3- 61. 3. The system displays “No” first. To return to the factory default settings, select “Yes” by operating the “ ” switch. 5. The system will notify you that the setting is complete for approximately 3 seconds. 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 ! Lifetime fuel consumption resetting 1. Perform the preparation steps accord- ing to “Preparation for initialization” F3- 61. Black plate (185,1) Instruments and controls 3-63 ” or 2. Operate the “ select Resetting” item, and then pull SET” switch toward you. ” switch to the “Lifetime Fuel Consumption the “ “ 3. The system displays “No” first. To reset the lifetime fuel consumption, select “Yes” by operating the “ ” switch. 5. Reconfirmation will be displayed. If you are sure you want to proceed, select “Yes” by operating the “ ” switch. 4. Confirm the setting by pulling the “ SET” switch toward you. 6. Confirm the setting again by pulling the “ /SET” switch toward you. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Black plate (186,1) 3-64 Instruments and controls Light control switch & Headlights CAUTION . Use of any lights for a long period of time while the engine is not running can cause the battery to discharge. . Before leaving the vehicle, make sure that the light control switch is turned to the “ ” (off) position. If the vehicle is left unattended for a long time with the light control switch set to a position other than “ ” (off) position, the battery may be discharged. 7. The system will notify you that the setting is complete for approximately 3 seconds. NOTE . Even if the key is removed from the ignition switch, the lights can be illu- minated by operating the light control switch from the “ ” (off) position to the “ . If the driver’s door is opened while the lights are illuminated and the key is removed from the ignition switch, the chirp sound informs the driver that the lights are illuminated. ” position. ” or “ ” position To turn on the headlights, turn the knob on the end of the turn signal lever. “ Instrument panel illumination, headlights, parking lights, front side marker lights, rear side marker lights, tail lights and license plate lights are on. “ illumination, parking Instrument panel lights, front side marker lights, rear side marker lights, tail lights and license plate lights are on. ” position 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 ” position: auto on/off headlights (if “ equipped) When the ignition switch is in the “ON” position, the instrument panel illumination, headlights, parking lights, front side mar- ker lights, rear side marker lights, tail lights and license plate lights are automatically on or off depending on the level of the ambient light. “ ” position The headlights are all off. NOTE The sensitivity of the auto on/off head- lights can be changed by a SUBARU dealer. Consult your SUBARU dealer for details. Also, for models with a multi function display, the setting can be changed using the display. For details, refer to “Multi function display (Non-US vehicles only; if equipped)” F3-29. Black plate (187,1) Instruments and controls 3-65 ! Sensor for the auto on/off head- lights (if equipped) & High/low beam change (dimmer) The sensor is on the instrument panel as shown in the illustration. CAUTION If any object is placed on or near the sensor, the sensor may not detect the level of the ambient light cor- rectly and the auto on/off headlights may not operate properly. To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “ ” on the combina- tion meter is also on. To switch back to low beam, pull the lever back to the center position. – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-66 Instruments and controls & Headlight flasher & Daytime running light system WARNING The brightness of the illumination of the high beam headlights is reduced by the daytime running light system. The light switch must always be turned to the “ ” position when it is dark outside. The high beam headlights will automati- cally illuminate at reduced brightness when the following conditions are fulfilled. . The engine is running. . The parking brake is fully released. . The light control switch is in the ”AUTO” (if equipped), “ ” or off position. . For CVT models, the select lever is in a position other than the “P” position. NOTE . When the light switch is in the “ ” position, the instrument panel illumina- tion, front side marker lights, tail lights and license plate lights are also illumi- nated. . For models with the auto on/off headlights, while the light control switch is in the “AUTO” position and the system is activated to the auto-on mode depending on the ambient light CAUTION Do not hold the lever in the flashing position for more than just a few seconds. To flash the headlights, pull the lever toward you and then release it. The high beam will stay on for as long as you hold the lever. The headlight flasher works even though the lighting switch is in the “ ” (off) position. When the headlights are on high beam, ” on the the high beam indicator light “ combination meter also illuminates. Black plate (188,1) level, the high beam headlights that have illuminated at reduced brightness turn off, and the low beam headlights turn on alternatively. At this time, the instrument panel front side marker lights, lights and license plate lights are also illuminated. illumination, tail 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Turn signal lever Illumination brightness con- trol Black plate (189,1) Instruments and controls 3-67 To darken, turn the control dial downward. NOTE . When the control dial is turned fully upward, the illumination brightness becomes the maximum and the auto- matic dimming function does not work at all. . The brightness setting is not can- celed even when the ignition switch is turned to the “LOCK” position. To activate the right turn signal, push the lever up. To activate the left turn signal turn signal, push the turn signal lever down. When the turn is finished, the lever will return automatically. If the lever does not return after cornering, return the lever to the neutral position by hand. To signal a lane change, push the turn signal lever up or down slightly and hold it during the lane change. The turn signal indicator lights will flash in the direction of the turn or lane change. The lever will return automatically to the neutral position when you release it. ” position The illumination brightness of the instru- ment panel dims under the following conditions. . when the light switch is in the “ “ . when the light control switch is in the “AUTO” position and the headlights illumi- nate automatically (models with auto on/ off headlights: Refer to “Headlights” F3- 64.) ” or You can also adjust the illumination bright- ness for better visibility in the following ways. To brighten, turn the control dial upward. 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-68 Instruments and controls Headlight beam leveler (if equipped) & Automatic headlight beam leveler (models with HID headlights) The HID headlights generate more light than conventional halogen headlights. Therefore a driver of an oncoming vehicle may experience too much glare if your headlight beam height adjustment is high when the vehicle is carrying a heavy load. The automatic headlight beam leveler adjusts the headlight beam height auto- matically and optimally according to the load being carried by the vehicle. Fog light switch (if equipped) 1) Headlight switch 2) Fog light switch The front fog lights will turn on when the fog light switch is placed in the “ ” position while the headlights are in the following condition. . while the headlight switch is in the “ position . for models with the auto on/off head- lights, while the headlight switch is in the “AUTO” position and the headlights turn on automatically ” To turn off the front fog lights, turn the switch back down to the “ ” position. Black plate (190,1) The indicator meter will lights are illuminated. light on the combination fog illuminate when the front 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 Wiper and washer WARNING In freezing weather, do not use the windshield washer until the wind- shield is sufficiently warmed by the defroster. Otherwise the washer fluid can freeze on the windshield, blocking your view. CAUTION . Do not operate the washer con- tinuously for more than 10 sec- onds, or when the washer fluid tank is empty. This may cause overheating of the washer motor. Check the washer fluid level frequently, such as at fuel stops. . Do not operate the wipers when the windshield or rear window is dry. This may scratch the glass, damage the wiper blades and cause the wiper motor to burn out. Before operating the wiper on a dry windshield or rear window, always use the wind- shield washer. . In freezing weather, be sure that the wiper blades are not frozen to the windshield or rear window before switching on the wipers. Attempting to operate the wiper with the blades frozen to the window glass could cause not only the wiper blades to be damaged but also the wiper mo- tor to burn out. the wiper blades are frozen to the window glass, be sure to operate the defroster, windshield wiper dei- cer (if equipped) or rear window defogger before turning on the wiper. If . If the wipers stop during opera- tion because of ice or some other obstruction on the window, the wiper motor could burn out even if the wiper switch is turned off. If this occurs, promptly stop the vehicle in a safe place, turn the ignition switch to the “LOCK” position and clean the window glass to allow proper wiper op- eration. . Use clean water if windshield washer fluid is unavailable. In areas where water freezes in winter, use SUBARU Windshield Washer Fluid or the equivalent. Black plate (191,1) Instruments and controls 3-69 Refer to “Windshield washer fluid” F11-28. Also, when driving the vehicle when there are freezing tempera- tures, use non-freezing type wi- per blades. . Do not clean the wiper blades with gasoline or a solvent, such as paint thinner or benzine. This will cause deterioration of the wiper blades. NOTE . The wiper operates only when the ignition switch is in the “ON” or “ACC” position. . The front wiper motor is protected against overloads by a circuit breaker. If the motor operates continuously under an unusually heavy load, the circuit breaker may trip to stop the motor temporarily. If this happens, park your vehicle in a safe place, turn off the wiper switch, and wait for approxi- mately 10 minutes. The circuit breaker will reset itself, and the wipers will again operate normally. . Clean your wiper blades and win- dow glass periodically with a washer solution to prevent streaking, and to remove accumulations of road salt or – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-70 Instruments and controls road film. Operate the windshield washer for at least 1 second so that washer solution will be sprinkled all over the windshield or rear window. . Grease, wax, insects or other mate- rial on the windshield or the wiper blade results in jerky wiper operation and streaking on the glass. If you cannot remove those streaks after operating the washer or if the wiper operation is jerky, clean the outer sur- face of the windshield or rear window and the wiper blades using a sponge or soft cloth with a neutral detergent or mild-abrasive cleaner. After cleaning, rinse the window glass and wiper blades with clean water. The glass is clean if no beads form on the glass when you rinse with water. . If you cannot eliminate the streaking even after following this procedure, replace the wiper blades with new ones. For replacement instructions, refer to “Replacement of wiper blades” F11-30. Black plate (192,1) & Windshield wiper and washer switches The wiper operates only when the ignition switch is in the “ON” or “ACC” position. ! Windshield wipers For a single wipe of the wipers, push the lever up. The wipers operate until you release the lever. ! Wiper intermittent time control When the wiper switch is in the “ ” position, turn the dial to adjust the operat- ing interval of the wiper. The operating interval can be adjusted in several steps from the shortest interval to the longest. : Mist (for a single wipe) : Off Intermittent : Low speed : High speed To turn the wipers on, push the wiper control lever down. To turn the wipers off, return the lever to the “ ” position. 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 ! Windshield washer NOTE Black plate (193,1) Instruments and controls 3-71 & Rear window wiper and washer switch – 5-door To wash the windshield, pull the wiper control lever toward you. The washer fluid sprays until you release the lever. The wipers operate while you pull the lever. The windshield washer fluid warning light illuminates when the washer fluid level in the tank has dropped to the lower limit. If the warning light illumi- nates, refill the tank with fluid. For the refilling procedure, refer to “Wind- shield washer fluid” F11-28. : Washer (accompanied by wiper op- eration) : Continuous Intermittent : Off : Washer (accompanied by wiper op- eration) ! Rear wiper To turn the rear wiper on, turn the knob switch upward. To turn the wiper off, switch to the “ With the switch turned to the “ return the knob ” position. ” posi- – CONTINUED – 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 3-72 Instruments and controls the rear wiper will tion, the rear wiper will operate intermit- tently at intervals corresponding to the vehicle speed. In this position, when you move the select lever to the “R” position (CVT models) or the shift lever to the reverse position (MT models), the rear wiper will switch to continuous operation. When you move the select lever/shift lever from the “R” (reverse) position to another position, return to intermittent operation. ! Washer To wash the rear window while the rear wiper is operating, turn the knob switch upward to the “ ” position. The washer fluid sprays until you release the knob. To wash the rear window when the rear wiper is not in use, turn the knob switch downward to the “ ” position. The washer fluid sprays and the wiper operates until you release the knob. Black plate (194,1) Mirrors Always check that the inside and outside mirrors are properly adjusted before you start driving. & Inside mirror & Auto-dimming mirror/com- pass (if equipped) The inside mirror has a day and night position. Pull the tab at the bottom of the mirror toward you for the night position. Push it away for the day position. The night position reduces glare from head- lights. LED 1) 2) Switch 3) Sensor 4) Compass display The auto-dimming mirror has an anti-glare feature which automatically reduces glare coming from headlights of vehicles behind you. It also contains a built-in compass. . By pressing and holding the switch for 3 seconds, the automatic dimming func- tion is toggled on or off. When the automatic dimming function is on, the LED indicator will illuminate. Even with the mirror in anti-glare mode, the mirror surface turns bright the transmission is shifted into reverse. This if 北米Model "A1120BE-B" EDITED: 2011/ 10/ 28 glare from vehicle headlights behind you and automatically dim the mirror to elim- inate glare and preserve your vision. For this reason, use care not to cover the sensors with stickers, or other similar items. Periodically wipe the sensors clean using a piece of dry soft cotton cloth or an applicator. ! Compass zone adjustment is to ensure good rearward visibility during reversing. . By pressing and releasing the switch for less than 3 seconds, the compass display is toggled on or off. When the compass is on, an illuminated compass reading will appear right corner of the mirror. in the upper When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner the mirror housing and damage the mirror. ! Photosensors to enter Compass calibration zones to the “Compass calibration 1. Refer zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and hold the switch for 6 seconds until the zone selection comes up (a number will be displayed in the mirror compass window). The mirror has a photosensor attached on the front and back sides. During nighttime

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2012 Subaru Impreza Owners Manual