2005 Nissan Quest Owners Manual

If you change the horn beep or the lamp flash feature with the keyfob, the display screen will not show the current mode. Use the keyfob to return to the previous mode and re-enable the display screen control.

Keyless remote response (cid:151) lights:

This key allows you to change the hazard indica- tor flash mode that occurs when pressing the LOCK or UNLOCK button on the keyfob.

4-14 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

NOTE:

If you change the horn beep or the lamp flash feature with the keyfob, the mode will not be changed with the display. Use the keyfob to return to the previous mode and re-enable the display control.

Auto re-lock time:

This key allows you to set the length of time before doors auto re-lock. Sensitivity of automatic headlights:

This key allows you to set the sensitivity of the automatic headlights: c Lower- less sensitive, automatic headlights will take longer to come on when the head- light sensor senses less ambient light.

c Higher- more sensitive, automatic head- lights will come on quicker when the head- light sensor senses less ambient light.

Automatic headlights off delay:

This key allows you to set the length of time before the automatic headlights turn off after exiting the vehicle.

Speed dependent wiper: This key allows you to turn on or turn off the driving speed dependent intermittent wiper func- tion. Return all settings to default: When this key is selected and turned on using the (cid:147)ENTER(cid:148) button, all settings made by VE- HICLE ELECTRONICS will return to the default settings.

LHA0262

System settings Language/Unit The LANGUAGE/UNIT screen will appear when selecting the (cid:147)Language/Unit(cid:148) key and push- ing the (cid:147)ENTER(cid:148) button. Language: English or French Unit: US (cid:151) mile, (cid:176)F, MPG

Metric (cid:151) km, (cid:176)C, L/100 km

You can select the language and unit using the joystick and (cid:147)ENTER(cid:148) button.

Display screen, heater, air conditioner and audio systems 4-15

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

LHA0270

LHA0271

LHA0272

Clock Adjusting the time: Select the (cid:147)Hours(cid:148) or (cid:147)Minutes(cid:148) key and move the joystick to the right or left to adjust the time. The time will change step by step. After completion of (cid:147)PREV(cid:148) button.

the setting, press the

Setting daylight savings time: Use the (cid:147)Daylight Saving Time(cid:148) key to adjust the clock to daylight savings time. ON: The displayed time advances by 1 hour. OFF: The current time is displayed.

Adjusting the time to the GPS: Select the (cid:147)Auto Adjust(cid:148) key. The time will be reset to the GPS time.

4-16 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

The GPS time (manual time) corresponding to the selected zone will be displayed. Pacific zone has been set as the initial (default) setting. Beep setting With this option ON, a beep will sound if any audio button is pushed.

BUTTON

To change the display brightness, push the button. Pushing the button again will change the display to DAY or NIGHT display. Then, adjust the brightness moving the joystick right or left. If no operation is done within 10 seconds, or if the (cid:147)PREV(cid:148) button is pushed, the display will return to the previous display.

LHA0273

Selecting the time zone: 1. Select the (cid:147)Select Time Zone(cid:148) key. The [TIME ZONE] screen will appear.

LHA0274
2. Select one of the following zones depending

on the current location. c Pacific zone c Mountain zone c Central zone c Eastern zone c Atlantic zone c Newfoundland zone

After selection, the [CLOCK SETTINGS] screen will appear.

Display screen, heater, air conditioner and audio systems 4-17

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

VENTILATORS

Adjust air flow direction for the driver and pas- senger sides1 , center s2 , and rear passenger s3
ventilators by moving the ventilator slide and/or ventilator assemblies.

HEATER AND AIR CONDITIONER (manual)

WARNING

c The air conditioner cooling function op- erates only when the engine is running. c On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possi- bly fatal injuries to people or animals. Do not leave children or adults who would normally require the support of others in your vehicle. Unattended pets should not be left alone either.

c Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.

c Positioning of the heater and/or air conditioner controls should not be done while driving so full attention may be given to vehicle operation.

LHA0328

4-18 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

(cid:151) Air flows from center and side

ventilators and the front and rear floor outlets.

(cid:151) Air flows mainly from the front and

rear floor outlets.

(cid:151) Air flows from defroster outlets

and the front and rear floor outlets.

(cid:151) Air flows mainly from defroster

outlets.

The air flow control dial also has intermediate positions which allow the air flow to be distrib- uted between 2 of the icon positions on the air flow control dial. Temperature control dial The temperature control dial allows you to adjust the temperature of the outlet air. To make the temperature more cool turn the dial more to the left. To make the temperature more warm turn the dial more to the right.

Air recirculation button

ON position: Push the the vehicle. ( Push the c driving on a dusty road.

button to recirculate air inside

will appear on the display.)

button to the on position when:

1. 2. 3. 4. 5. 6. 7. 8.

Fan speed control dial Air recirculation button Temperature control dial Air conditioner button Air flow control dial Rear window defroster switch Rear fan speed dial Rear temperature dial

WHA0501

CONTROLS Fan control dial The fan control dial turns the fan on and off, and controls fan speed. Air flow control dial The air flow control dial allows you to select the air flow outlets. MAX A/C

(cid:151) Air flows from center and side

vents with maximum cooling (air conditioning).

(cid:151) Air flows from center and side

ventilators.

Display screen, heater, air conditioner and audio systems 4-19

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

c to prevent traffic fumes from entering pas-

senger compartment.

c for maximum cooling when using the air con-

ditioner.

OFF position: Push the button again to turn air recircula- tion off. ( will appear on the display.) Out- side air is drawn into the passenger compartment and distributed through the selected outlet. Use the off position for normal heater or air con- ditioner operation.

Air conditioner button

Start the engine, turn the fan control dial to the desired position and push the button to turn on the air conditioner. A/C will appear on the display when the air conditioner is operating. To turn off the air conditioner, push the button again, the display will show A/C OFF. The air conditioner cooling function oper- ates only when the engine is running. Rear window defroster switch For more information about the rear window de- froster switch, see (cid:147)Rear window defroster switch(cid:148) in the (cid:147)Instruments and controls(cid:148) section of this manual.

HEATER OPERATION Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets.

1. Push the

for normal heating ( play).

button to the OFF position shown on dis-

2. Turn the air flow control dial to the

position.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de- sired position between the middle and the hot position.

Ventilation This mode directs outside air to the side and center ventilators.

1. Push the

button to the OFF position

shown on display).

2. Turn the air flow control dial to the

position.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position.

Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows.

1. Turn the air flow control dial to the

position.

2. Turn the fan control dial to the desired posi-

tion.

3. Turn the temperature control dial to the de- sired position between the middle and the hot position.

c To quickly remove ice or fog from the win- dows, turn the fan control dial to the highest setting and the temperature control lever to the full HOT position.

c When the

position is selected, the air conditioner automatically turns on (however, A/C will not appear on the display) if the outside temperature is more than 36(cid:176)F (2(cid:176)C). The air conditioning system will con- tinue to operate until the fan control dial is turned to OFF or the vehicle is shut off, even is turned to a if the air flow control dial position other than the position. This dehumidifies the air which helps defog the windshield. The mode automatically

4-20 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.

Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets. 1. Push the

button to the OFF position

shown on display).

2. Turn the air flow control dial to the

position.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position.

Heating and defogging This mode heats the interior and defogs the wind- shield. 1. Turn the air flow control dial to the

position.

2. Turn the fan control dial to the desired posi-

tion.

3. Turn the temperature control dial to the de- sired position between the middle and the hot position.

c When the

position is selected, the air conditioner automatically turns on (however, A/C will not appear on the display) if the outside temperature is more than 36(cid:176)F (2(cid:176)C). The air conditioning system will con- tinue to operate until the fan control dial is turned to OFF or the vehicle is shut off, even is turned to a if the air flow control dial position other than the position. This dehumidifies the air which helps defog the mode automatically windshield. The turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.

Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation. AIR CONDITIONER OPERATION Start the engine, turn the fan control dial to the desired position, and push in the button to activate the air conditioner. When the air condi- tioner is on, cooling and dehumidifying functions are added to the heater operation. The air conditioner cooling function oper- ates only when the engine is running.

Cooling This mode is used to cool and dehumidify the air.

1. Push the

button to the OFF position.

2. Turn the air flow control dial to the

position.

3. Turn the fan control dial to the desired posi-

tion.

4. Push the

the display.

button. A/C will appear on

5. Turn the temperature control dial to the de-

sired position.

c For quick cooling when the outside tem- perature is high, push the button to the ON position ( shown on display). Be sure to return the to the OFF po- sition for normal cooling ( shown on display). You may also select MAX A/C for quick cooling.

Dehumidified heating This mode is used to heat and dehumidify the air.

1. Push the

button to the OFF position

shown on display).

2. Turn the air flow control dial to the

position.

Display screen, heater, air conditioner and audio systems 4-21

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

3. Turn the fan control dial to the desired posi-

tion.

4. Push the

A/C.

button. The display shows

5. Turn the temperature control dial to the de-

sired position. Operating tips c Keep the windows and sunroof

(if so equipped) closed while the air conditioner is in operation.

AIRFLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. For additional information on heating and cooling see (cid:147)Heating(cid:148) on page 4-20 and (cid:147)Cooling(cid:148) on page 4-21. The air re- circulation ( ) button should always be in the OFF position for heating and defrosting.

c After parking in the sun, drive for 2 or 3
minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air con- ditioner to cool the interior more quickly.

c The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps pre- vent damage to the system due to lack of lubrication.

c If

the engine coolant

temperature gauge indicates engine coolant tem- perature over the normal range, turn the air conditioner off. See (cid:147)If your vehicle overheats(cid:148) in the (cid:147)In case of emergency(cid:148) section of this manual.

4-22 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

WHA0502

WHA0503

Display screen, heater, air conditioner and audio systems 4-23

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

4-24 Display screen, heater, air conditioner and audio systems

WHA0504

WHA0505

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

WHA0506

Display screen, heater, air conditioner and audio systems 4-25

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

4-26 Display screen, heater, air conditioner and audio systems

WHA0507

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

Display screen, heater, air conditioner and audio systems 4-27

WHA0508

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

HEATER AND AIR CONDITIONER (automatic) (if so equipped)

c Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.

c Positioning of the heater and/or air conditioner controls should not be done while driving so full attention may be given to vehicle operation.

Start the engine and operate the controls to activate the air conditioner. AUTOMATIC OPERATION Cooling or heating (auto) This mode may be normally used all year round as the system automatically works to keep a con- stant temperature. Air flow distribution and fan speed are also controlled automatically.

1. Push the AUTO button on. (AUTO will be

displayed.)

2. Turn the driver(cid:146)s side temperature control dial to the left or right to set the desired temperature. Driver and passenger tem- peratures can be set independently. Press AUTO a second time to activate dual climate control functions. Turn the passenger(cid:146)s side temperature control dial to the left or right to set the desired passenger(cid:146)s temperature.

Driver temperature control dial Front window defroster button Fan speed control and system OFF dial AUTO button Passenger temperature control dial A/C ON/OFF button Rear control and fan speed dial Rear window defroster button

1. 2. 3. 4. 5. 6. 7. 8. 9. MODE button 10. Air recirculation button 11. Rear temperature control dial

LHA0491

WARNING

c The air conditioner cooling function op- erates only when the engine is running. c On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possi- bly fatal injuries to people or animals. Do not leave children or adults who would normally require the support of others in your vehicle. Unattended pets should not be left alone either.

4-28 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

c Adjust the temperature dial to about 75(cid:176)F

(24(cid:176)C) for normal operation.

c The temperature of the passenger compart- ment will be maintained automatically. Air flow distribution, fan speed and A/C on/off are also controlled automatically.

Dehumidified defrosting or defogging 1. Push the defroster control button

to turn the system on. The display will show the defrost icon.

2. Turn the temperature dial to the left or right

to set the desired temperature.

c To quickly remove ice from the outside of the windows, turn the manual fan control dial to the maximum position

c As soon as possible after the windshield is clean, push the AUTO button to return to the auto mode.

c When the DEF control

is activated, the air conditioner will automatically be turned on at outside temperatures above 36(cid:176)F (2(cid:176)C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the fan control is turned OFF or the vehicle is shut off, even if the air flow MODE control button is used to select a position other than the posi-

tion. This dehumidifies the air which helps defog the windshield. The air recirculation mode automatically turns off, allowing out- side air to be drawn into the passenger compartment to further improve the defog- ging performance.

(cid:151) Air flows from center and side

ventilators and foot outlets.

(cid:151) Air flows mainly from foot outlets. (cid:151) Air flows from defroster and foot

outlets.

(cid:151) Air flows mainly from defroster

outlets.

MANUAL OPERATION Fan speed control Turn the fan control dial manually control the fan speed.

left or right to

To turn system off Turn and hold the fan speed control dial all the way to the left ( 0 ) until the system turns off.

Push the AUTO button to return to automatic control of the fan speed. Air recirculation Push the air recirculation button to recir- culate interior air inside the vehicle. Push the AUTO button to return to automatic mode.

The air recirculation button will not be activated when the air conditioner is in DEF, floor, or floor/defrost mode. Air flow control Pushing the MODE button manually controls air flow and selects the air outlet to:

(cid:151) Air flows from center and side

ventilators.

Display screen, heater, air conditioner and audio systems 4-29

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

REAR SEAT AIR CONDITIONER

OPERATING TIPS c When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate for a maximum of 150 seconds. However, this is not a malfunction. After the coolant tempera- ture warms up, air flow from the foot outlets will operate normally.

WHA0509

Rear fan speed control dial Rear temperature control dial

1. 2. REAR CONTROL BUTTON You can adjust the climate control system for rear seat passengers using the buttons on the main control panel. Front passengers can control the rear functions by placing the controls on any setting other than the (cid:147)R(cid:148).

4-30 Display screen, heater, air conditioner and audio systems

LIC0515
The sunload sensor s1 , located on the top center of the instrument panel, helps the system main- tain a constant temperature. Do not put anything on or around this sensor.

To operate the rear air conditioner, the engine must be running and the front air conditioner system must be on. The rear seat air conditioner can be turned on and off from the front controls. If the rear seat fan control dial is set to (0), the air conditioner is turned off. If it is set to any of the fan speed positions, air is discharged from the rear vents at the corresponding speed. When the rear seat fan control dial is set to (R), the rear seat passengers control their own fan speed. The rear seat air conditioner only works when the front seat air conditioner is operating.

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 08/04/04—betty X

LHA0490

CONTROLS Fan control dial The fan control dial s1 turns the rear vent fan on and off, and controls fan speed. Temperature control dial The temperature control dial s2 allows rear pas- sengers to adjust the temperature of the outlet air.

SERVICING AIR CONDITIONER

AUDIO SYSTEM

The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth(cid:146)s ozone layer. Special charging equipment and lubricant is re- quired when servicing your NISSAN air condi- tioner. Using improper refrigerants or lubricants will cause severe damage to your air conditioner system. See (cid:147)Air conditioner system refrigerant and lubricant recommendations(cid:148) in the (cid:147)Techni- cal and consumer information(cid:148) section of this manual. A NISSAN dealer is able to service your (cid:147)environ- mentally friendly(cid:148) air conditioning system.

WARNING

The air conditioner system contains re- frigerant under high pressure. To avoid personal injury, any air conditioner ser- vice should be done only by an experi- enced technician with proper equipment.

RADIO Turn the ignition key to the ACC or ON position and press the ON•OFF/VOLUME control knob to turn the radio on. If you listen to the radio with the engine not running, the key should be turned to the ACC position.

Radio reception is affected by station signal strength, distance from radio transmitter, build- ings, bridges, mountains and other external influ- ences. Intermittent changes in reception quality normally are caused by these external influences. Using a cellular phone in or near the ve- hicle may influence radio reception quality. Radio reception Your NISSAN radio system is equipped with state-of-the-art electronic circuits to enhance ra- dio reception. These circuits are designed to extend reception range, and to enhance the qual- ity of that reception.

However there are some general characteristics of both FM and AM radio signals that can affect radio reception quality in a moving vehicle, even when the finest equipment is used. These char- acteristics are completely normal in a given re- ception area, and do not indicate any malfunction in your NISSAN radio system.

Display screen, heater, air conditioner and audio systems 4-31

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

the vehicle outside of any metal or large building for satellite radio to receive all of the necessary data. No satellite radio reception is available and (cid:147)NO SAT(cid:148) is displayed when the SAT band option is selected unless optional satellite receiver and antenna are installed and an XMT or SIRIUS(cid:153) satellite radio service subscription is active. Satellite radio performance may be affected if cargo carried on the roof blocks the satellite radio signal. If possible, do not put cargo over the satellite antenna.

Reception conditions will constantly change be- cause of vehicle movement. Buildings, terrain, signal distance and interference from other ve- hicles can work against ideal reception. De- scribed below are some of the factors that can affect your radio reception. FM RADIO RECEPTION Range: FM range is normally limited to 25 - 30
miles (40 - 48 km), with monaural (single chan- nel) FM having slightly more range than stereo FM. External influences may sometimes interfere with FM station reception even if the FM station is within 25 miles (40 km). The strength of the FM signal is directly related to the distance between the transmitter and receiver. FM signals follow a line-of-sight path, exhibiting many of the same characteristics as light. For example they will reflect off objects.

Fade and drift: As your vehicle moves away from a station transmitter, the signals will tend to fade and/or drift.

Static and flutter: During signal interference from buildings, large hills or due to antenna position (usually in conjunction with increased distance from the station transmitter) static or flutter can be heard. This can be reduced by adjusting the treble control to reduce treble response.

Multipath reception: Because of the reflective characteristics of FM signals, direct and reflected signals reach the receiver at the same time. The signals may cancel each other, resulting in mo- mentary flutter or loss of sound. AM RADIO RECEPTION AM signals, because of their low frequency, can bend around objects and skip along the ground. In addition, the signals can be bounced off the ionosphere and bent back to earth. Because of these characteristics, AM signals are also sub- ject to interference as they travel from transmitter to receiver.

Fading: Occurs while the vehicle is passing through freeway underpasses or in areas with many tall buildings. It can also occur for several seconds during ionospheric turbulence even in areas where no obstacles exist.

Static: Caused by thunderstorms, electrical power lines, electric signs and even traffic lights. SATELLITE RADIO RECEPTION (if so equipped) When the satellite radio is first installed or the battery has been replaced, the satellite radio may not work properly. This is not a malfunction. Wait more than 10 minutes with satellite radio ON and

4-32 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

c Do not use the following CDs as they may cause the CD player to malfunc- tion: c 3.1 in (8 cm) discs with an adapter c CDs that are not round c CDs with a paper label c CDs that are warped, scratched, or

have abnormal edges

disc DIGITAL AUDIO(cid:148) logo on the disc or packaging.

c During cold weather or rainy days, the player may malfunction due to the hu- midity. If this occurs, remove the CD and dehumidify or ventilate the player completely.

c The player may skip while driving on

rough roads.

c The CD player sometimes cannot func- tion when the compartment tempera- ture is extremely high. Decrease the temperature before use.

c Do not expose the CD to direct sun-

light.

c CDs that are in poor condition or are dirty, scratched or covered with finger- prints may not work properly.

c The following CDs may not work prop-

erly: c Copy control compact discs (CCCD) c Recordable compact discs (CD-R) c Rewritable compact discs (CD-RW)

Display screen, heater, air conditioner and audio systems 4-33

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

LHA0099
AUDIO OPERATION PRECAUTIONS Compact disc (CD) player c Only use high quality 4.7 inches (12 cm) round discs that have the (cid:147)COMPACT

11. REAR AV button 12. 13. Tuning and AUDIO control knob

Rear speaker control button

(BASS, TREBLE, FADE and BAL- ANCE)

14. CD insert slot 15. CD eject button

*No satellite radio reception is available and (cid:147)NO SAT(cid:148) is displayed when the SAT button is pressed unless optional satellite receiver and antenna are installed, and an XMT or SIRIUS(cid:153) sat- ellite radio service subscription is active.

LHA0355

SEEK/TRACK change button TUNE/REW/FF button PAUSE/MUTE button PROG/RPT button

1. 2. 3. 4. 5. ON•OFF/VOLUME control knob

PRESET A-B-C select button Station select buttons (1 - 6)

Type A 6. 7. 8. CD play button 9. 10. SAT (satellite) radio select button*

FM-AM band select button

4-34 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

11. REAR AV button 12. 13. Tuning and AUDIO control knob (BASS,

Rear speaker control button

TREBLE, FADE and BALANCE)

14. CD load button 15. CD insert slot 16. CD eject button

*No satellite radio reception is available and (cid:147)NO SAT(cid:148) is displayed when the SAT button is pressed unless optional satellite receiver and antenna are installed, and an XMT or SIRIUS(cid:153) satel- lite radio service subscription is active.

FM-AM-SAT RADIO WITH COMPACT DISC (CD) PLAYER (Type A)/CD CHANGER (Type B) No satellite radio reception is available and (cid:147)NO SAT(cid:148) is displayed when the SAT button is pressed unless optional satellite receiver and antenna are installed, and an XMT or SIRIUS(cid:153) satellite radio service subscription is active. Audio main operation ON•OFF/Volume control: Turn the ignition key to ACC or ON, and then push the ON•OFF/Volume control knob while the system is off to call up the mode (radio or CD) which was playing immediately before the system was turned off.

SEEK/TRACK change button TUNE/REW/FF button PAUSE/MUTE button PROG/RPT button

1. 2. 3. 4. 5. ON•OFF/VOLUME control knob

LHA0321

PRESET A-B-C select button Station and CD select buttons (1 - 6)

Type B 6. 7. 8. CD play button 9. 10. SAT (satellite) radio select button*

FM-AM band select button

Display screen, heater, air conditioner and audio systems 4-35

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 08/04/04—tbrooks X

To turn the system off, press the ON•OFF/Volume control knob.

Turn the ON•OFF/Volume control knob to adjust the volume.

This vehicle has speed sensitive control volume (SSV) for audio. The audio volume changes as the driving speed changes. AUDIO knob (BASS, TREBLE, FADE, BAL- ANCE and SSV if so equipped):

Press the AUDIO knob to change the mode as follows: BASS ! TREBLE ! FADE ! BALANCE ! SSV (if so equipped)

To adjust Bass, Treble, Fade and Balance, press the AUDIO knob until the desired mode appears in the display. Turn the Tuning knob to adjust Bass and Treble to the desired level. You can also use the Tuning knob to adjust Fader and Balance modes. Fader adjusts the sound level between the front and rear speakers and Balance adjusts the sound between the right and left speakers.

To change the SSV mode to OFF, LOW, MID or HIGH, turn the Tuning knob to the right or left.

wise, the radio or CD display will automatically reappear after about 10 seconds. Display CD text:

To change the text displayed while playing a CD, press the AUDIO knob until (cid:147)Display Mode(cid:148) ap- pears.

Turn the Tuning knob within 2 seconds. The text will change as follows: Track number ˆ! Track title ˆ! Disc title ˆ! Track number Display satellite radio text (if so equipped):

To change the text displayed while listening to satellite radio, press the AUDIO knob until (cid:147)Dis- play Mode(cid:148) appears.

Turn the Tuning knob within 2 seconds. The text will change as follows: Channel number ˆ! Channel name ˆ! Artist ˆ! Title ˆ! Channel number Pause/mute button:

To mute or pause the audio sound, push the PAUSE/MUTE button.

Once you have adjusted the sound quality to the desired level, press the AUDIO knob repeatedly until the radio or CD display reappears. Other- 4-36 Display screen, heater, air conditioner and audio systems

To release the mute or pause, push the button again.

FM/AM/SAT radio operation FM/AM/SAT band select:

Pushing the FM-AM or SAT radio select button will change the band as follows: AM ˆ! FM or SAT (Satellite- if so equipped) When FM-AM or SAT radio select button is pushed while the ignition switch is in the ACC or ON, the radio will come on at the station last played.

The last station played will also come on when the ON•OFF/Volume control knob is depressed to ON.

No satellite radio reception is available and (cid:147)NO SAT(cid:148) is displayed when the SAT button is pressed unless optional satellite receiver and antenna are installed, and an XMT or SIRIUS(cid:153) satellite radio service subscription is active.

If a compact disc is playing when the FM-AM or SAT radio select button is pushed, the compact disc will automatically be turned off and the last radio station played will come on.

The FM stereo indicator ST will glow during FM stereo reception. When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception.

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 08/04/04—tbrooks X

TUNE (Tuning):

WARNING

The radio should not be tuned while driv- ing so full attention may be given to ve- hicle operation.

To manually tune the radio, push the TUNE button ) or turn the tuning knob to right or left.

or

To move quickly through the channels, hold either the or button down for more than 1.5 seconds.

SEEK tuning:

Push the SEEK/TRACK button ( for less than 1.5 seconds to tune from high to low or low to high frequencies and stop at the next broadcasting station. SCAN tuning:

or

or

Push the button for more than 1.5 seconds to stop at each broadcasting station for 5 seconds. Pushing the button again during this 5 second period will stop SCAN tuning and the radio will remain tuned to that station. If the button is not pushed within 5
seconds, SCAN tuning moves to the next station.

or

Station memory operations: 18 stations can be set for the FM, AM and SAT radio to the A, B and C preset button in any combination of AM, FM or SAT* stations. 1. Press the PRESET ABC button to change between storage banks. The radio displays the icon A, B or C to indicate which set of presets are active.

2. Tune to the desired station using manual, SEEK or SCAN tuning. Push and hold any of the desired station memory buttons (1 - 6) until a beep sound is heard. (The radio mutes when the select button is pushed.)

3. The channel indicator will then come on and the sound will resume. Memorizing is now complete.

4. Other buttons can be set in the same manner. * SAT presets are only available on SAT equipped vehicles. If the battery cable is disconnected, or if the fuse blows, the radio memory will be canceled. In that case, reset the desired stations. Radio data system (RDS): RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band) and/or SAT radio encoded within a regular radio broad-

cast. Currently, most RDS stations are in large cities, but many stations are now considering broadcasting RDS data. RDS can display: c Station call sign, such as (cid:147)WHFR 98.3(cid:148). c Station name, such as (cid:147)The Groove(cid:148). c Music or programming type such as (cid:147)Clas-

sical(cid:148), (cid:147)Country(cid:148), or (cid:147)Rock(cid:148).

c Traffic reports about delays or construction. If the station broadcasts RDS information, the RDS icon is displayed. Program type (PTY): PTY can be used to search for a certain program type. Certain areas have a limited number of stations that transmit RDS. Many stations trans- mit call letters and frequencies only. Searching or scanning by program type may yield a limited number of selections. When PROG/RPT button is pressed for more than 1.5 seconds during FM or SAT (if so equipped) mode, the PTY name of the current tuned station is displayed. During this time if the PTY data code is zero or the data is unreadable, the display will show NONE. To change the PTY: 1. Press the PROG/RPT button.

Display screen, heater, air conditioner and audio systems 4-37

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 08/04/04—tbrooks X

SEEK tuning: 3. After selecting a program type, push the ) for less than SEEK button ( 1.5 seconds within 10 seconds. Tuning to the PTY station will start. If you do not push the SEEK button within the 10 second pe- riod, the PTY mode will be canceled.

or

SCAN tuning: 4. Push the

or

button for more than 1.5 seconds to scan the PTY name stations and stop at each broadcasting sta- tion for 5 seconds. Pushing the button again during this 5 second period will stop SCAN tuning and the radio will remain tuned to that station. If the button is not pushed within 5 seconds, SCAN tuning moves to the next station.

or

2. Press the TUNE button (

LHA0275
) to chose a specific program type. Refer to the illustration. The display will show (cid:147)SEEK, SCAN?(cid:148)

or

Compact disc (CD) player operation (Type A)

CAUTION

c Do not force the compact disc into the

slot. This could damage the player.

c Trying to load a CD with the CD door closed could damage the CD and/or CD changer.

c Only one CD can be loaded into the CD

player at a time.

Turn the ignition key to the ACC or ON position and insert the compact disc into the slot with the label side facing up. The compact disc will be guided automatically into the slot and start playing.

If the radio is already operating, it will automati- cally turn off and the compact disc will play. If the system has been turned off while the com- pact disc was playing, pushing the ON•OFF/VOL control knob will start the compact disc. 3.1 in (8 cm) diameter compact discs can also be used without an adapter. CD button: When the CD button is pushed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play. When the CD button is pushed with the compact disc loaded but the radio playing, the radio will automatically be turned off and the compact disc will start to play.

REW (Rewind), FF (Fast Forward):

(rewind) or

When the (fast forward) button is pushed while the compact disc is being played, the compact disc will play while rewind- ing or fast forwarding. When the button is re- leased, the compact disc will return to normal play speed.

4-38 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 08/04/04—tbrooks X

SEEK/TRACK:

When the button is pushed for less than 1.5 seconds while a compact disc is playing, the track being played returns to its beginning. Push several times to skip back through tracks. The compact disc will go back the number of times the button is pushed.

When the button is pushed for less than 1.5 seconds while a compact disc is playing, the next track will start to play from its beginning. Push several times to skip through tracks. The compact disc will advance the number of times the button is pushed. (When the last track on the compact disc is skipped through, the first track will be played.)

or

When the button is pushed for more than 1.5 seconds, each track will play for about 10 seconds. To stop playing, push the button. REPEAT (RPT):

When the PROG/RPT button is pushed while the compact disc is being played, the play pattern can be changed as follows: ALL DISC RPT ! 1 TRACK RPT ! 1 DISC RDM ! ALL DISC RPT

ALL DISC RPT: the entire disk will be repeated 1 TRACK RPT: the current track will be repeated 1 DISC RDM: all tracks will be played randomly REAR AV:

Pushing the REAR AV button for less than 1.5
seconds turns the rear seat audio controller on. Pushing it again will turn the rear seat audio controller off. If the vehicle is not equipped with a rear seat audio controller, the display will show (cid:147)REAR AV N/A(cid:148).

If a DVD is loaded in the DVD entertainment system (if so equipped), pushing the REAR AV button for more than 1.5 seconds will turn the DVD player on.

When the REAR AV button is pushed for more than 1.5 seconds with a DVD loaded and another audio source playing, the other source will auto- matically be turned off and the DVD will start to play.

(SPEAKER CONTROL) button:

Push this button to turn the rear speakers off and headphones on. Push this button again to turn rear seat speakers back on and headphones off.

CD EJECT:

When the pact disc loaded, ejected.

button is pushed with the com- the compact disc will be

button is pushed while the compact When disc is being played, the compact disc will eject and the system will turn off. CD IN indicator:

CD IN indicator appears on the display when the CD is loaded with the system on. Compact disc (CD) changer operation (Type B)

CAUTION

c Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player.

c Trying to load a CD with the CD door closed could damage the CD and/or CD changer.

Turn the ignition key to the ACC or ON position. To insert the disc, first push the LOAD button. Insert the compact disc into the slot with the label side facing up. The compact disc will be guided automatically into the slot and start playing.

Display screen, heater, air conditioner and audio systems 4-39

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 08/04/04—tbrooks X

If the radio is already operating, it will automati- cally turn off and the compact disc will play.

If the system has been turned off while the com- pact disc was playing, pushing the ON•OFF/VOL control knob will start the compact disc.

LOAD button:

CAUTION

Only load one CD into the CD changer at a time.

REW (Rewind), FF (Fast Forward):

(rewind) or

When the (fast forward) button is pushed while a compact disc is playing, the compact disc will play while rewinding or fast forwarding . When the button is released, the compact disc will return to normal play speed.

When the CD button is pushed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play.

SEEK/TRACK:

When the CD button is pushed with the compact disc loaded with the tape or the radio playing, the tape or radio will automatically be turned off and the compact disc will start to play.

To insert a CD in the CD changer, push the LOAD button for less than 1.5 seconds. Select the loading slot by pushing the CD insert select button (1 - 6), then insert the CD. To insert 6 CDs to the CD changer, push the LOAD button for more than 1.5 seconds. The slot numbers (1 - 6) will illuminate on the display when CDs are loaded into the changer. CD button: When the CD button is pushed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play. When the CD button is pushed with the compact disc loaded with the radio playing, the radio will automatically be turned off and the compact disc will start to play. 4-40 Display screen, heater, air conditioner and audio systems

When the button is pushed for less than 1.5
seconds while a compact disc is playing, the track being played returns to its beginning. Push several times to skip back through tracks. The compact disc will go back the number of times the button is pushed.

When the button is pushed for less than 1.5
seconds while the compact disc is playing, the next track will start to play from its beginning. Push several times to skip through tracks. The compact disc will advance the number of times

the button is pushed. (When the last track on the compact disc is skipped through, the first track will be played.)

or

button for more When pushing the than 1.5 seconds, each track will play for about To 10
push the button again. CD select buttons:

seconds.

playing,

stop

To play another CD that has been loaded, push a CD select button (1 - 6). REPEAT (RPT):

When the PROG/RPT play button is pushed while the compact disc is played, the play pattern can be changed as follows: ALL DISC RPT ! 1 DISC RPT! 1 TRACK RPT ! ALL DISC RDM ! 1 DISC RDM ! ALL DISC RPT

ALL DISC RPT: All discs loaded will be repeated. 1 DISC RPT: The disc that is currently playing will be repeated. 1 TRACK RPT: The track that is currently playing will be repeated ALL DISC RDM: Tracks from all discs will be played randomly 1 DISC RDM: Tracks from the disc that is cur- rently playing will be played randomly

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 08/04/04—tbrooks X

reload (except 3.1 in [8 cm] diameter com- pact discs).

All discs: c Press and hold the

button for more than 1.5 seconds. The compact discs will be ejected one by one. If a disc is not removed within 15 seconds, or the button is pressed again during the eject sequence, the entire disc eject sequence will be can- celed.

When this button is pushed while the compact disc is being played, the compact disc will eject and the last source will be played. CD IN indicator: The slot numbers (1 - 6) will illuminate if CDs have been loaded into the changer.

REAR AV: Pushing the REAR AV button for less than 1.5
seconds turns the rear seat audio controller on. Pushing it again will turn the rear seat audio controller off. If the vehicle is not equipped with a rear seat audio controller, the display will show (cid:147)REAR AV N/A(cid:148). If a DVD is loaded in the DVD entertainment system (if so equipped), pushing the REAR AV button for more than 1.5 seconds will turn the DVD player on. When the REAR AV button is pushed for more than 1.5 seconds with a DVD loaded and another audio source playing, the other source will auto- matically be turned off and the DVD will start to play.

(SPEAKER CONTROL) button:

Push this button to turn the rear speakers off and headphones on. Push this button again to turn rear seat speakers back on and headphones off.

CD EJECT:

Current disc: c Press the slot number (1 - 6) for the desired disc, then press the button. The com- pact disc will be ejected. If the disc is not removed within 15 seconds, the disc will

LHA0049

CD CARE AND CLEANING c Handle a CD by its edges. Do not bend the

disc. Never touch the surface of the disc.

c Always place the discs in the storage case

when they are not being used.

c To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion.

c Do not use a conventional record cleaner or

alcohol intended for industrial use.

c A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated.

Display screen, heater, air conditioner and audio systems 4-41

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 08/04/04—tbrooks X

To stop the FF or REW function, press the or button for less than 1.5 seconds again. When playing a CD in the CD changer (if so equipped), push the tuning switch ( or between discs when multiple CDs are loaded.

) for more than 1.5 seconds to change

MODE select switch Push the mode select switch to change the mode in the following sequence: PRESET A, B or C (stored AM/FM radio stations), CD and DVD (if so equipped). To switch from PRESET A, PRE- SET B or PRESET C press the tuning switch ) to toggle to the next set of preset stations. Volume control switch Push the volume control switch up or down to increase or decrease the volume.

or

LHA0269

Tuning

POWER on/off switch Tuning switch

Volume control switch 1. 2. MODE select switch 3. 4. STEERING WHEEL SWITCH FOR AUDIO CONTROL (if so equipped) The audio system can be operated using the controls on the steering wheel. POWER on/off switch With the ignition key turned to the ACC or ON position, push the POWER switch to turn the audio system on or off.

or

Memory change (radio): Push the tuning switch ( ) for less than 1.5 seconds to change the radio frequency. Seek tuning (radio): Push the tuning switch ( ) for more than 1.5 seconds to seek the next or previ- ous radio station. FF, REW: Push the tuning switch ( ) for less 1.5 seconds to return to the beginning of the present program or skip to the next program. Push several times to skip back or skip through programs.

or

or

4-42 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 08/04/04—marlene X

REAR AUDIO CONTROLS (if so equipped) Push the REAR AV button on the front radio control panel to turn the rear controls on. Push the button again to turn rear controls off.

The headphones symbol illuminates on the front display when the rear audio controls are on. Two headphone jacks are provided so two rear seat passengers may listen to the audio system pri- vately.

The rear volume controls can only increase the volume to the level at which the front radio volume control is set.

One or two (if so equipped) infrared headphones are included if the vehicle is equipped with the DVD entertainment system. Most portable radio headphones work with the rear audio controls.

For vehicles equipped with the FM/AM/SAT radio with compact disc player, if the rear passengers turn off the rear speakers and are using head- phones they may choose to listen to a different media than the front passengers. The rear pas- sengers can listen to the radio while the front passengers can listen to the same thing, a CD or SAT radio (if so equipped).

7.

Infrared headphone transmitter lens*

LHA0322

*Red transmitters will be visible when infrared headphones are on.

Display screen, heater, air conditioner and audio systems 4-43

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

VOL (volume) control button

1. 2. MODE select button 3. 4. 5. 6. Headphone jacks

NEXT button SEEK button

speaker control button

The NEXT button does not function while in SAT radio mode or when playing a DVD or CD. ANTENNA Window antenna The antenna pattern is printed inside the rear passenger and driver side windows.

CAUTION

c Do not place metalized film near the rear driver or passenger side window glass or attach any metal parts to it. This may cause poor reception or noise.

c When cleaning the inside of the rear driver or passenger side window, be careful not to scratch or damage the window antenna. Lightly wipe along the antenna with a dampened soft cloth.

VOL (volume) button: The VOL button allows the rear passengers to adjust the headphone volume level.

(SPEAKER CONTROL) button:

Push this button to turn the rear speakers off and headphones on. Push this button again to turn rear seat speakers back on and headphones off. MODE button: The MODE button allows the rear passengers to change between AM, FM, CD, DVD and AUX. The media options are listed on the face plate of the rear audio controls. When a source of media is selected, the media label will be illuminated. SEEK button:

In AM or FM mode the SEEK button allows the rear seat passengers to find the next radio station up or down the station band frequency.

In CD mode the SEEK button allows the rear passengers to find the next or previous selection on the CD. NEXT button:

When the NEXT button is pushed while in AM or FM mode, the radio will change to the next preset.

4-44 Display screen, heater, air conditioner and audio systems

DVD ENTERTAINMENT SYSTEM (if so equipped)

LHA0327

WARNING

c The DVD Entertainment System is de- signed for rear seat passenger viewing only.

c The driver must not attempt to operate the DVD Entertainment System while the vehicle is in motion so that full at- tention may be given to vehicle operation.

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

CAUTION

c The glass screen on the liquid crystal display may break if hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mer- cury. In case of contact with skin, wash immediately with soap and water.

c Use a damp, soft cloth when cleaning the DVD Entertainment System compo- nents. Do not use solvents or cleaning solutions.

c Do not attempt to use the system in extreme temperature conditions [below -4(cid:176)F (-20(cid:176)C) or above 158(cid:176)F (70(cid:176)C)].

c To avoid draining the vehicle battery, do not operate the system more than 15
minutes without starting the engine.

LHA0316
DIGITAL VIDEO DISC (DVD) PLAYER CONTROLS

EJECT button DVD slot ENTER button POWER on/off button

1. 2. 3. 4. 5. MODE button 6. 7. 8. 9. MENU button 10. DISPLAY button 11. NAVIGATION keys

Input jacks STOP button PLAY/PAUSE button

Display screen, heater, air conditioner and audio systems 4-45

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

DISPLAY button

6. 7. MODE button SUBTITLE button 8. 9. AUDIO button 10. ANGLE button 11. CLEAR button 12. PAUSE button 13. PLAY button 14. FAST FORWARD/FAST REVERSE

button

15. MENU button 16. NAVIGATION keys 17. BACK button 18. NUMERIC KEYPAD REMOTE CONTROL

LHA0317

LHA0315

FLIP-DOWN SCREEN The flip-down screen has a wireless remote con- trol receiver s1 located at the bottom of the screen.

On vehicles equipped with 2 screens for second and third row passengers, both screens will have a remote control receiver.

1. 2. 3.

POWER button STOP button NEXT TRACK/CHAPTER and PREVI- OUS TRACK/CHAPTER button TITLE button ENTER button

4. 5. 4-46 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

CAUTION

c The glass screen on the liquid crystal display may break if hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mer- cury. In case of contact with skin, wash immediately with soap and water.

c The screen rotates down to view and up into the housing to store when not in use. Ensure that the screen is latched securely into the housing when stored.

SAA0720

SAA0721

Headphones Power ON/OFF:

Push the power button to turn the headphones on or off. Volume control:

Turn the volume control knob to adjust the vol- ume.

The headphones will automatically be turned off in 30 seconds if there is no sound during that period. To prevent the battery from being dis- charged, keep the power suppy turned off when not in use.

NOTE: For optimum infrared headphone perfor- mance, increase the volume on the rear seat controller to the maximum level and adjust the infrared headphone volume us- ing the volume control on the headphones. Using a lower volume setting on the rear seat controller can cause static noise in the infrared headphones.

Display screen, heater, air conditioner and audio systems 4-47

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

PLAYING A DIGITAL VIDEO DISC (DVD)

CAUTION

c Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery.

c Do not allow the system to get wet. Excessive moisture such as spilled liq- uids may system to malfunction.

cause

the

c The driver must not attempt to wear the headphones while the vehicle is in mo- tion so that full attention may be given to vehicle operation.

c While playing video CD media, this DVD player does not guarantee complete functionality of all video CD formats.

With the DVD player, you can hear DVD videos, video CDs and CDs using headphones. Passen- gers in the rear seat can enjoy the sound inde- pendently of the front seat.

Press the REAR AV button located on the front controls for more than 1.5 seconds to hear the sound of the DVD player through the speakers.

Pushing the turns the rear speakers on and off.

button on the front controls

It is possible to operate the DVD player by remote control.

Headphones are a wireless type and no cables are necessary. You can use them in almost all the ranges in the rear seat. (It is not possible to use the headphones in the front seat.) POWER on/off button:

With the ignition switch turned to the ACC or ON position, push the POWER button to turn the DVD player on or off.

Insert the DVD into the slot with the label side facing up. The DVD will be guided automatically into the slot.

If the DVD player is off and a DVD is inserted, the DVD player will automatically turn on.

CAUTION

Do not force the compact disc into the slot. This could damage the player.

MODE select button:

Push the Mode button to select Audio/Video source between DVD and AUX input (input jacks

on the faceplate, Red = right channel audio input, White = left channel audio input, and Yellow = Video input).

The display will show the (cid:147)AUX(cid:148) in the upper left corner of the display for 4 seconds once the Mode is changed to AUX.

To use the input jacks, refer to (cid:147)Auxiliary input jacks(cid:148) in this section.

or

PLAY:

When the PLAY/PAUSE button on the player or the PLAY button on the remote control is pushed, the player will play.

In play mode, the display will briefly show on the upper left corner of the display.

FF (Fast Forward), REW (Remote control only):

Push FAST FORWARD/FAST REVERSE but- tons to carry out the fast forward or fast reverse presentation at 5 times normal play speed.

Push FAST FORWARD/FAST REVERSE but- tons again or PLAY button to resume the normal play speed.

4-48 Display screen, heater, air conditioner and audio systems

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

NEXT CHAPTER/ PREVIOUS CHAPTER (Remote control only):

When the (NEXT CHAPTER) button is pushed while the DVD is being played, the pro- gram next to the present one will start to play from its beginning. Push several times to skip through programs. The DVD will advance the number of the times pushed. When (PREVIOUS CHAPTER) button is the pushed, the program being played returns to its beginning. Push several times to skip back through programs. The DVD will go back the number of times the button is pushed.

button

is

or

PAUSE:

When the PLAY/PAUSE button on the player or the PAUSE button on the remote control is pushed, the player will pause playing of the me- dia. In pause mode, the player will show on the upper left corner of the display until the player is changed to another mode.

STOP:

Push the STOP button once to stop playing the in the upper media. The display will show left corner of the display for 4 seconds, and the last disc position will be stored. When the PLAY

it will resume at the

button is pushed again, stored disc track and time position. If the STOP button is pushed again when the player is already in Stop mode, it will reinitialize the pointer to the beginning of the disc. In effect it will ignore the last stored disc position and upon receipt of the next play message it will begin at the Title Menu, or at (cid:147)the beginning of the disc(cid:148).

c Use NAVIGATION KEYS to navigate within the display menu, and use ENTER to select the item.

c Holding the DISPLAY control on the face- plate for longer than approximately 2 sec- onds while in the display menu will reset the display characteristics to their nominal val- ues. (Faceplate feature only)

EJECT:

When the EJECT button is pushed with the DVD loaded, it will be ejected. The display will show the EJECT symbol in the upper left corner of the display for 4 seconds once the EJECT button is pushed. If the DVD is not loaded, the display will show (cid:147)NO DISC(cid:148). If the DVD comes out and is not removed within 25 seconds, it will be pulled back into the slot to protect it. DISPLAY: If the DISPLAY control is pushed for less than 2
seconds, the display menu will appear on the screen. c The display menu will remain on the screen for 10 seconds if no subsequent control activations occur.

If the DISPLAY control button on the faceplate is pushed for more than 2 seconds, the media track/time information will be displayed along the bottom of the display. Pushing the DISPLAY con- trol for more than 2 seconds will remove the media track/time information from the display. (Faceplate feature only) NAVIGATION KEYS: If media is in PLAY mode, activation of the NAVI- GATION KEYS (Up, Down, Left, and Right) will perform the next chapter/track, previous chapter/track, fast re- forward, and the display will verse and fast show respec- tively in the upper left corner of the display for 4
seconds. (Faceplate feature only) If media is in PAUSE mode, activation of the NAVIGATION KEYS (Up, Down and Right) will perform the next chapter/track, previous chapter/track and slow Display screen, heater, air conditioner and audio systems 4-49

functions:

functions:

following

following

and

Z REVIEW COPY—2005 Quest (van) Owners Manual—USA_English (nna) 07/21/04—debbie X

forward, and the display will show and a forward arrow symbol respectively in the upper left corner of the display for 4 seconds. (Faceplate feature only)

If media is in activated MENU mode, the NAVI- GATION KEYS will be used to navigate Up, Down, Left, and Right within the menu.

If display control menu is on, the NAVIGATION KEYS will be used to navigate Up, Down, Left, and Right within the menu. ENTER:

In MENU mode, push the ENTER button to select MENU items.

In the display menu, push the ENTER button to select items for modification, as per the on- screen instructions. MENU:

If the media is in PLAY mode and the MENU button is pressed, the DVD menu will appear on the screen. Use Navigation Keys to navigate within the menu, and use ENTER to select the item.

Push the MENU button again to return to PLAY mode.

TITLE (Remote control only):

CLEAR (Remote control only):

Push TITLE button to return the DVD media to the (cid:147)title(cid:148) of the DVD.

Push TITLE button again to return to the previous stop point and play. BACK (Remote control only):

Push the BACK button to exit the current active menu and return to the previous menu. SUBTITLE (Remote control only):

Push the SUBTITLE button to call up subtitle selection menu.

Repeatedly press the SUBTITLE button to cycle through each available subtitle. AUDIO (Remote control only):

Push the AUDIO button to call up audio menu.

Repeatedly press the AUDIO button to cycle through each available audio track. ANGLE (Remote control only):

Push the ANGLE button to call up camera angle