2011 Nissan Murano Owners Manual

the Vehicle Phonebook.

is ready to call

4-86 Center display, heater, air conditioner, audio, phone and voice recognition systems

There are different methods to input a phone number. Select one of the following options

Model "Z51-D" EDITED: 2010/ 7/ 23

instead of “Enter Number by Keypad” in step 3.

— Copy from Call History

The system will show a list of incoming, outgoing or missed calls that were down- loaded from the connected cellular phone (depending on the phone’s compatibility). Select one of these entries to save in the vehicle phonebook.

— Copy from the Handset

The system will show the connected cellular phone’s phonebook that was downloaded (depending on the phone’s compatibility). Select one of these entries to save in the vehicle phonebook.

Black plate (255,1)

SAA2620

SAA2523

Editing the Vehicle Phonebook 1. Push the PHONE button and select

the

“Vehicle Phonebook” key.

2. Select the desired entry from the displayed

list.

3. Select the “Edit” key.

4. Select the desired item to change.

The following editing items are available: . Entry #

Changes the displayed number of selected entry.

the

. Name

Edit the name of the entry using the keypad displayed on the screen.

. Number

Edit the phone number using the keypad displayed on the screen.

Type

Select an icon from the icon list.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-87

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (256,1)

. Voicetag

Confirm and store the voicetag. Voicetags allow easy dialing using the NISSAN Voice Recognition system. (See “NISSAN VOICE RECOGNITION SYSTEM (models with na- vigation system)” later in this section.)

To delete an entry, select the “Delete” key at step 3.

SAA2524

SAA2621

MAKING A CALL To make a call, follow this procedure.

1. Push the PHONE button on the instrument panel or the button on the steering wheel. The “PHONE” screen will appear on the display.

2. Select the “Handset Phonebook” key on the

“PHONE” menu.

3. Select the desired entry from the list.

4. Confirm the correct entry by selecting for the

correct number from the list.

5. Select

the “Call” key to start dialing the

number.

There are different methods to make a call. Select one of the following options instead of “Handset Phonebook” in step 2 above. . Vehicle Phonebook

Select an entry stored in the Vehicle’s Phonebook. . Call History

Select an outgoing, incoming or missed call downloaded from your cell phone (depend- ing on your phone’s compatibility).

4-88 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

. Dial Number

Input the phone number manually using the keypad displayed on the screen. (See “HOW TO USE TOUCH SCREEN (models with navigation system)” earlier in this section.)

Black plate (257,1)

. Answer

Accept an incoming call to talk.

. Hold Call

Put an incoming call on hold.

. Reject Call

Reject an incoming call.

To finish the call, perform one of following procedures listed below.

the

a) Select the “Hang up” key.

SAA2525

b) Push the PHONE button on the instrument

panel.

c) Push the

button on the steering wheel.

RECEIVING A CALL When you hear a phone ring, the display will change to the incoming call mode. To receive a call, perform one of the following procedures listed below.

a) Select the “Answer” key.

b) Push the PHONE button on the instrument

panel.

c) Push the

button on the steering wheel.

There are some options available when receiving a call. Select one of the following displayed on the screen.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-89

Model "Z51-D" EDITED: 2010/ 7/ 23

. Keypad

Using the touch tone, send digits to the connected party for using services such as voicemail.

. Cancel Mute

This will appear after “Mute” is selected. Mute will be canceled.

To adjust the person’s voice to be louder or quieter, push the volume control switch (+ or −) on the steering wheel or turn the volume control knob on the instrument panel while talking on the phone. This adjustment is also available in the SETTING mode.

SAA2526

DURING A CALL There are some options available during a call. Select one of the following displayed on the screen if necessary. . Hang up

Finish the call. . Use Handset

Transfer the call to the cellular phone.

. Mute

Mute your voice to the person.

4-90 Center display, heater, air conditioner, audio, phone and voice recognition systems

Black plate (258,1)

SAA2527

PHONE SETTING To set up the Bluetooth® Hands-Free Phone System to your preferred settings, push the SETTING button on the instrument panel and select the “PHONE” key.

Edit Vehicle Phonebook To edit the vehicle phonebook, use the same procedure as described in “VEHICLE PHONE- BOOK” earlier in this section.

Delete Phonebook The vehicle phonebook entries can be deleted all at the same time or one by one.

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (259,1)

Auto Download When this item is activated, the phonebook of a hands-free phone is automatically downloaded at the same time that the hands-free phone is connected.

Download Handset Phonebook Download the contacts registered in a Blue- tooth® cellular phone. Availability of this function depends on each cellular phone. The memory downloading procedure from the cellular phone also varies according to each cellular phone. See cellular phone Owner’s Manual for details.

Volume The following kinds of phone volume can be set. Pushing the PHONE button and selecting the “Volume” key can also operate the same settings. . Ringtone/Incoming Call/Outgoing Call

To increase or decrease the volume, select the “Ringtone”, “Incoming Call” or “Out- going Call” key and adjust it with the multi- function controller. . Automatic Hold

When this function is activated, an incoming phone call is automatically held.

. Vehicle Ringtone

When this function is activated, a specific ringtone that is different from the cellular phone will sound when receiving a call.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-91

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (260,1)

TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.

Symptom

Solution

System fails to interpret the command correctly.

The system consistently selects the wrong voicetag.

1. Ensure that the command is valid. (See “NISSAN VOICE RECOGNITION SYSTEM (models with navigation system)” later in this section; page 4-106.)

2. Ensure that the command is spoken after the tone.

3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle.

4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too noisy to use the phone, it is likely that the voice commands will not be recognized.

5. If more than one command was said at a time, try saying the commands separately.

1. Ensure that the voicetag requested matches what was originally stored. (See “VEHICLE PHONEBOOK” earlier in this section.)

2. Replace one of the names being confused with a new name.

4-92 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (261,1)

BLUETOOTH® HANDS-FREE PHONE SYSTEM (models without navigation system) (if so equipped)

WARNING

. Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.

If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle before doing so.

CAUTION

To avoid draining the vehicle battery, use a phone after starting the engine.

Your vehicle is equipped with Bluetooth® Hands-Free Phone System. If you are an owner of a Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless technology, you can make or receive a telephone call with your cellular phone in your pocket.

Once your cellular phone is paired to the in- vehicle phone module, no phone connecting

procedure is required. Your phone is automati- cally connected with the in-vehicle phone module when the ignition switch is pushed to the “ON” position with the registered cellular phone turned on and carried in the vehicle. You can register up to 5 different Bluetooth® cellular phones in the in-vehicle phone module. However, you can talk on only one cellular phone at a time.

When a call is active, the audio system and microphone (located in the ceiling in front of the rearview mirror) are used for the handsfree communications.

If the audio system is being used at the time, the audio mode will mute and will stay muted until the active call is ended.

The NISSAN Voice Recognition system sup- ports the phone commands, so dialing a phone number using your voice is possible. Before using the Bluetooth® Hands-Free Phone System, refer to the following notes. . Set up the wireless connection between a cellular phone and the in-vehicle phone module before using the Bluetooth ® Hands-Free Phone System.

. Some Bluetooth® enabled cellular phones may not be recognized by the in-vehicle phone module.

. You will not be able to use a hands-free

phone under the following conditions:

— Your vehicle is outside of the telephone

service area.

— Your vehicle is in an area where it

is difficult to receive radio waves; such as in a tunnel, in an underground parking garage, behind a tall building or in a mountainous area.

— Your cellular phone is locked in order not

to be dialed.

. When the radio wave condition is not ideal it may be to hear the other person’s voice

or ambient sound is too loud, difficult during a call.

the ignition switch is Immediately after pushed to the “ON” position, it may be impossible to receive a call for a short period of time.

. Do not place the cellular phone in an area surrounded by metal or far away from the in- vehicle phone module to prevent tone quality degradation and wireless connection dis- ruption.

. While a cellular phone is connected through the the cellular phone may

the Bluetooth® wireless connection, battery power of discharge quicker than usual.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-93

Model "Z51-D" EDITED: 2010/ 7/ 23

— Number of Channel: 79

— This wireless equipment can’t be used for any services related to safety because there is the possibility of radio interfer- ence.

REGULATORY INFORMATION

Bluetooth® is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Visteon Corpora- tion.

If the Bluetooth® Hands-Free Phone System seems to be malfunctioning, please contact a NISSAN dealer.

. Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise.

. Refer to the cellular phone Owner’s Manual regarding the telephone pairing procedure specific to your phone, battery charging, cellular phone antenna, etc.

The antenna display on the monitor will not coincide with the antenna display of some cellular phones.

. Keep the interior of the vehicle as quiet as possible to hear the caller’s voice clearly as well as to minimize its echoes.

If reception between callers is unclear, adjusting the incoming or outgoing call volume may improve the clarity.

This wireless hands free car kit is based on Bluetooth® technology,

— Frequency: 2402 MHz - 2480 MHz

— Output Power: 4.14 dBm E.I.R.P — Modulation: FHSS GFSK 8DPSK, p/

4DQPSK

4-94 Center display, heater, air conditioner, audio, phone and voice recognition systems

Black plate (262,1)

SAA1858

CONTROL BUTTONS 1. PHONE SEND

button

Push the button to initiate a VR session or answer an incoming call. You can also use the button to skip through system feedback and to enter commands during a call.

2. PHONE END

button

Push the button to cancel a VR session or end a call.

VOICE RECOGNITION SYSTEM You can also use the Bluetooth® hands-free phone system with Voice Recognition System.

INFO

The available voice commands are only

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (263,1)

SAA1858

Giving voice command:

1. Push and release the

switch located on

the steering wheel.

applicable to the relevant language set in the LANGUAGE setting screen. (See “HOW TO USE SETTING BUTTON” earlier in this section.)

If the vehicle is in motion, some commands may not be available so full attention may be given to vehicle operation.

. Speak a voice command within 5 seconds after the beep sound. If no voice command is given, the system will ask you for a number. If no further command is given, the session ends.

. Speak in a natural voice without pausing

between words.

Using system

Initialization:

When the ignition switch is pushed to the ON position, Voice Recognition System is initialized, which may take up to one minute. When completed, the system is ready to accept voice switch on the steering commands. If the wheel is pushed before the initialization com- pletes, the system will not accept any command.

Before starting:

To get the best performance out of the Voice Recognition System, observe the following: . Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing the voice commands cor- rectly.

. Wait until a tone sounds before speaking a

command.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-95

Model "Z51-D" EDITED: 2010/ 7/ 23

4. The system acknowledges the command and announces the next set of available commands.

5. After the tone sounds, speak the phone

number.

6. When you have finished speaking the phone the system repeats it back and

number, announces the available commands.

7. After system responds, speak “Dial” and the

system dials the spoken numbers.

Operating tips: . Voice commands cannot be accepted when

the icon is

the command is not

If the system announces, “Please say again”. Repeat the command in a clear voice.

recognized,

. Push the

switch or the BACK button

once to return to the previous screen.

If you want to cancel the command, push the switch. The message “Voice input is canceled” will be announced. If you want to adjust the volume of the system feedback, push the volume control buttons [+] or [−] on the steering wheel or use the audio system volume knob while the system is making an announcement.

SAA2574

2. A list of commands appears on the screen, and the system announces, “Please say a command after the beep. Available com- mands are: Call, Phonebook, Recent Calls, Connect Phone or Help”.

3. After the tone sounds and the icon on the , speak a screen changes from command. See the “List of voice com- mands” later in this section for the voice command list. Speak “Call” for example.

to

INFO

Voice commands cannot be recognized as long as the screen icon is not in the command recognition mode

4-96 Center display, heater, air conditioner, audio, phone and voice recognition systems

Black plate (264,1)

How to speak commands:

The Voice Recognition System requires a certain way to speak voice commands. Speak normally and clearly in the direction of the microphone (located in front of the rearview mirror). Every digit of the number must be spoken individually and in a normal manner. The hands-free mode will work best when the telephone number is spoken in blocks of three to five digits. After each spoken block is termi- nated, the system will repeat the three to five digits and wait for you to speak the next digit or block of digits required for the telephone number.

See “List of voice commands” later in this section for the appropriate commands that can be spoken for the hands-free mode system.

Example:

In order to initiate a call, speak “Phonebook”.

INFO

If you are controlling the telephone system by voice command for the first time or do not know the appropriate voice command, speak “Help”. The system announces the available commands.

. When you speak numbers, you can speak

both “zero” or “oh” for “0”.

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (265,1)

Personal vocabulary (voicetags):

Voice Recognition System is equipped with the function called “voicetags”, which can be associated with the phone number and name in the phonebook. Using the voice tag will automatically generate a speed dial to the registered number.

See “PHONEBOOK REGISTRATION” earlier in this section.

You can call the identified number using the following command: “Dial” followed by the voice tag.

Dialling a name with a voice tag:

It is possible to call up a name via a voice tag instead of a number, provided the name and number of your correspondent has been pre- viously stored in the phonebook.

Dial via a voice tag, according to the following procedure.

1. Push the

switch.

2. The system replies “please say a command after the beep. Available commands are: Call, Phonebook, Recent Calls, Connect Phone or Help”.

3. Give your

instructions to the system by saying: “Dial John” for example (“John” must have been previously set as a voice tag for

John’s phone number) or “Dial One” if John is classified as one in the phonebook.

the system cannot understand your If command, repeat it according to the re- commendations mentioned in “How to speak commands” earlier in this section.

4.

If the given name (voice tag) is correct, the phone system will dial the number registered for “John”.

INFO

To end the voice command phase at any stage switch once in of the procedure, push the order to activate the cancel command.

Manual command selection:

Commands can be selected manually. While the commands are displayed on the screen, select a command by operating the Tune switch, and button. Once a command is then push the manually selected, the voice command function is cancelled. To return to voice command mode, the current push the operation, and then perform the first procedure of voice command.

button to cancel

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-97

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (266,1)

List of voice commands:

COMMAND

“Call/Dial” “”

“Call/Dial” “Redial”

“Call” “”

“Phonebook” “”

“Phonebook” “List Names”

“Phonebook” “Transfer Entry”

“Phonebook” “Delete Entry”

“Connect Phone” “Software Version”

“Connect Phone” “Add Phone”

“Connect Phone” “Select Phone”

“Connect Phone” “Delete Phone”

“Connect Phone” “Bluetooth Off”

“Connect Phone” “Replace Phone”

ACTION

Dials the specified .

Dials the last number.

Dials the specified .

Displays the specified in the phonebook.

Displays all the names in the phonebook.

Transfers the phonebook data to the system.

Deletes the phonebook registered in the system.

Displays the software version of the system to be connected.

Connects a cellular phone to the system.

Selects a registered cellular phone.

Deletes a registered cellular phone. Turns the Bluetooth® connection off. Changes the registered order of the cellular phones.

“Connect Phone” “Delete Phone” “All Phones”

Deletes all registered cellular phones.

“Connect Phone” “Delete Phone” “List Phones”

Selects a registered cellular phone and deletes it.

4-98 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (267,1)

SAA2575

SAA2576

SAA2577

PAIRING PROCEDURE Up to 5 cellular phones can be registered.

3. Speak: “Add Phone”. The system acknowl- edges the command and asks you to initiate connecting from the phone handset.

4. When asked to enter a PIN code to connect a Bluetooth® cellular phone, enter the code “1234”.

1. Push the

button on the steering wheel. The system announces the available com- mands.

2. Speak: “Connect Phone”. The system ac- knowledges the command and announces the next set of available commands.

INFO:

The Add Phone command is not available when the vehicle is moving.

The code is always “1234” regardless of the number of phones paired.

The connecting procedure of a cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual for more information.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-99

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (268,1)

SAA2578

SAA2579

SAA2580

5. The system asks the user to speak a name

for the phone.

Speak: “Yes”. The system acknowledges the command and registers the cellular phone.

If the name is too long or too short, the system tells the user, then prompts the user for a name again.

Also, if more than one phone is connected and the name sounds too much like a name already used, the system tells the user, then prompts the user for name again.

PHONEBOOK REGISTRATION When the cellular phone is connected to the in- vehicle module, the data stored in the cellular logs, phone such as phonebook, outgoing call incoming call logs is automatically transferred and registered to the system.

logs and missed call

The availability of this function depends on each cellular phone. The copying procedure also varies according to each cellular phone. See cellular phone Owner’s Manual for more infor- mation.

MAKING A CALL To make a call, follow the procedures below.

1. Push the

button on the steering wheel.

A tone will sound.

2. Speak: “Call”. The system acknowledges the command and announces the next set of available commands.

3. Speak the registered person’s name. The system acknowledges the command and announces the next set of available com- mands.

Up to 1,000 phone numbers per registered cellular phone can be stored in the phonebook.

4. Speak: “Yes”. The system acknowledges the

command and makes the call.

4-100 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

5. Once the call has ended, press the

button on the steering wheel.

RECEIVING A CALL

When the ring tone is heard, press the button on the steering wheel.

Once the call has ended, press the button on the steering wheel.

NOTE: To reject a call when the ring tone is heard, press the button on the steering wheel.

Black plate (269,1)

“Mute on/off” — Use the Mute command to mute the user’s voice so the other party cannot hear it.

Use the mute command again to unmute the user’s voice.

“Transfer Handset” — Use the Transfer Handset command to transfer the call from the Bluetooth® Hands-Free Phone System to a cellular phone when privacy is desired. The system announces, “Transfer Handset. The call is transferred to the handset only.” The system then ends the VR session.

The Transfer Call command can also be issued again to return to a hands-free call through the vehicle.

“Help” — The system announces the avail- able commands.

NOTE: If the other party ends the call or the cellular phone network connection is lost while the Mute feature is on, the Mute feature may need to be reset to “off.”

SAA2581

DURING A CALL During a call there are several command options button on the steering available. Press the wheel to mute the receiving voice and enter commands.

“(digits)” — Use the Send command to enter numbers during a call. For example, if directed to dial an extension by an auto- mated system:

Speak: “Sending one two three four.”

The system acknowledges the command and sends the tones associated with the numbers. The system then ends the VR session and returns to the call.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-101

Model "Z51-D" EDITED: 2010/ 7/ 23

Once the name and location are confirmed, the system begins the call.

. Number

When prompted by the system, speak the number to call.

. Redial

Use the Redial command to call the last number of outgoing calls. The system acknowledges the command, repeats the If a redial number and begins dialing. number does not exist, the system an- nounces, “There is no number to redial” and ends the VR session.

. Callback

Use the Callback command to call the last number in incoming calls. The system acknowledges the command, repeats the number and begins dialing. If an incoming the system call number does not exist, announces, “There is no number to call back” and ends the VR session.

. Help

The system announces the available com- mands.

SAA2582

PHONE SETTINGS Call

(a name)

If there are entries stored in the Phone Book, a number associated with a name and location can be dialed. See “Phone book registration” in this section to learn how to store entries. When prompted by the system, say the name of the phone book entry to call.

The system acknowledges the name. If there are multiple locations associated with the name, the system asks the user to choose the location.

4-102 Center display, heater, air conditioner, audio, phone and voice recognition systems

Black plate (270,1)

Phonebook (a name)

SAA2583

Use the name command to seek the name and locations registered in the phonebook in alphabetical order. When the system ac- knowledges the alphabet the user spoke, the system announces all registered names and locations beginning with that alphabet.

Playback of the list can be stopped at any time by pressing a button on the steering wheel. The system ends the VR session.

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (271,1)

List Names

Use the List Names command to hear the names and locations registered in the phonebook. When the system acknowl- edges the command, the system announces all voicetags registered in the system.

Playback of the list can be stopped at any time by pressing a button on the steering wheel. The system ends the VR session.

Transfer Entry

Use the Transfer Entry command to transfer the phonebook data stored in a cellular phone to the system.

The system acknowledges the command and asks the user to initiate a transfer from the phone handset. The new contact phone number will be transferred from the cellular phone via a Bluetooth® communication link.

The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s Manual for more information. The system repeats the number and prompts the user for the next command. After entering numbers, choose “Store.”

The system confirms the name, location and number. The system then asks if the user would like to store another location for the same name. If the user does not wish to

store another location, the system ends the VR session.

. Delete Entry

Use the Delete Entry command to delete a specific number or all numbers in the phonebook. The system announces the names of the phone numbers already stored in the system. The system then gives the option to delete a specific number or all numbers. Once the user chooses to delete a number or all numbers, the system asks the user to confirm.

. Help

The system announces the available com- mands.

Recent Calls Incoming

SAA2584

Use the Incoming command to make a call viewing the list of incoming calls.

. Missed

Use the Missed command to make a call viewing the list of missed calls.

. Outgoing

Use the Outgoing command to make a call viewing the list of outgoing calls.

. Redial

Use the Redial command to dial the last Center display, heater, air conditioner, audio, phone and voice recognition systems 4-103

Model "Z51-D" EDITED: 2010/ 7/ 23

outgoing call.

. Callback

Use the Callback command to dial the last incoming call.

. Help

The system announces the available com- mands.

Connect Phone . Add Phone

SAA2585

Use the Pair Phone command to connect a compatible phone to the Bluetooth® Hands- Free Phone System.

When asked to enter a PIN code to connect a Bluetooth® cellular phone, enter the code “1234”.

The code is always “1234” regardless of the number of phones connected. Up to 5
phones can be connected. If the user tries to connect a sixth phone, the system announces that the user must first delete one phone or replace an existing phone. If

4-104 Center display, heater, air conditioner, audio, phone and voice recognition systems

Black plate (272,1)

the user tries to connect a phone that has already been connected to the vehicle system, the system announces the name the phone is already using. The that connecting procedure will then be can- celled.

The Add Phone command is not available when the vehicle is moving.

. Select Phone

Use the Select Phone command to select a phone of lesser priority when two or more phones connected with Bluetooth® Hands- Free Phone System are in the vehicle at the same time.

The system asks the user to name the phone and confirm the selection.

Once the selection is confirmed, the se- lected phone remains active until the ignition switch is placed in the OFF position or a new phone is selected.

. Delete Phone

Use the Delete Phone command to delete a specific phone or all phones from Bluetooth® Hands-Free Phone System. The system announces the names of the phones already paired with the system and their priority level. The system then gives the option to delete a specific phone, all phones or listen

Model "Z51-D" EDITED: 2010/ 7/ 23

to the list again. Once the user chooses to delete a phone or all phones, the system asks the user to confirm.

Priority Level 2 = Phone B Priority Level 3 = Phone A

. Bluetooth On/Off

NOTE: When the user deletes a phone, the associated phone book for that phone will also be deleted. . Replace Phone

Use the Replace Phone command to change the priority level of the active phone.

The priority level determines which phone is active when more than one paired Blue- tooth® phone is in the vehicle.

The system states the priority level of the active phone and asks for a new priority level (1, 2, 3, 4, 5).

If the new priority level is already being used for another phone, the two phones will swap priority levels.

For example, if the current priority levels are:

Priority Level 1 = Phone A Priority Level 2 = Phone B Priority Level 3 = Phone C

and you change the priority level of Phone C to Level 1, then:

Use the Bluetooth On/Off command to turn on/off Bluetooth® Hands-Free Phone Sys- tem. . Help

The system announces the available com- mands.

VOICE ADAPTATION MODE The Voice Adaptation mode allows up to two users with different dialects to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different voice adaptation model for each con- nected phone.

Training procedure 1. Position the vehicle in a reasonably quiet

outdoor location.

2. Sit

in the driver’s seat with the engine the parking brake on, and the

running, transmission in Park.

3. Press the

button.

Priority Level 1 = Phone C

4. Speak: “Help”. The system acknowledges

Black plate (273,1)

the command and announces the next set of available commands.

5. Speak:

"Voice Adaptation". The system acknowledges the command and displays the voice adaptation mode screen.

6. Voice memory A or memory B is selected automatically. If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions pro- vided by the system.

7. When preparation is complete and you are

ready to begin, press the

button.

8. The voice adaptation mode will be ex- plained. Follow the instructions provided by the system.

9. When training is finished, the system will tell you an adequate number of phrases have been recorded.

10. The system will ask you to say your name. Follow the instructions to register your name.

11. The system will announce that voice adapta- tion has been completed and the system is ready.

The voice adaptation mode will stop if:

button is pressed in voice

The adaptation mode.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-105

Model "Z51-D" EDITED: 2010/ 7/ 23

.

The vehicle is driven during voice adaptation mode.

The ignition switch is placed in the OFF or LOCK position.

Black plate (274,1)

Alternate Command Mode be turned off and Standard Mode be used for the best recognition performance.

the voice commands for

For the navigation system, refer to the Navigation System Owner’s Manual of your vehicle.

NISSAN VOICE RECOGNITION STANDARD MODE The following section is applicable when the Standard Mode is activated.

The Standard Mode enables you to complete the desired operation by simply following the prompts that appear on the display and also are announced by the system.

NISSAN VOICE RECOGNITION SYSTEM (models with navigation system)

NISSAN Voice Recognition allows hands-free operation of the Phone, Navigation, Information and Audio systems in one of two modes, Standard Mode or Alternate Command Mode.

In Standard Mode, commands that are available are always shown on the display and announced by the system. You can complete your desired operation by simply following the prompts given by the system. (See “NISSAN VOICE RECOG- NITION STANDARD MODE” later in this section for details.)

For advanced operation, you can use the Alternate Command Mode. (See “NISSAN VOICE RECOGNITION ALTERNATE COM- MAND MODE” later in this section for details.) When this mode is active, an expanded list of commands can be spoken after pushing the switch, and the voice command TALK menu prompts are turned off. Review the expanded command list, which is available when this mode is active. Note that in this mode the recognition success rate may be affected as the number of available commands and the ways of speaking each command are increased.

To switch one mode to another, see each mode description later in this section.

To improve the recognition success rate when Alternate Command Mode is active, try using the Speaker Adaptation Function available in that mode. Otherwise, is recommended that

it

4-106 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (275,1)

SAA2529

SAA2530

SAA2531

Activating Standard Mode When the Alternate Command Mode is active, perform the following steps to switch to the Standard Mode.

1. Push the SETTING button on the instrument

panel.

2. Select the “Others” key.

3. Select the “Voice Recognition” key.

4. Select the “Alternate Command Mode” key.

1. Push the INFO button on the instrument

5. The indicator turns off and the Standard

panel.

Mode activates.

2. Select the “Others” key.

Displaying user guide If you use the NISSAN Voice Recognition system for the first time or you do not know how to operate it, you can display the User Guide for confirmation.

You can confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands.

3. Select the “Voice Recognition” key.

4. Select the “User Guide” key.

5. Select a preferred item.

You can skip steps 1 and 3 above if you say “Help”.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-107

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (276,1)

SAA2532

SAA2534

Getting Started Before using the NISSAN Voice Recognition system for the first time, you can confirm how to use commands by viewing the Getting Started section of the User Guide.

1. Select the “Getting Started” key.

2. You can confirm the page by scrolling the

screen using the multi-function controller.

Tutorials on the operation of the NISSAN Voice Recognition system

Let’s Practice This mode helps learn how to use the NISSAN Voice Recognition system.

1. Select the “Let’s Practice” key.

2. After the message screen appears, push the

TALK

switch on the steering wheel.

3. Speak the displayed number after the tone. The evaluation screen will be displayed and the result can be confirmed.

Available items: . Getting Started

Describes the basics of how to operate the NISSAN Voice Recognition system.

Let’s Practice

Mode that allows practicing by following the instructions of the system voice.

. Using the Address Book

Tutorial for entering a destination by using the Address Book.

Finding a Street Address (if so equipped)

Tutorial for entering a destination by street address.

. Placing Calls

Tutorial for making a phone call by voice command operation.

. Help on Speaking

Displays useful tips of speaking for correct command recognition by the system.

the Command List

Note that feature is only available when Alternate Command Mode is active.

If you choose “Using the Address Book”, “Finding a Street Address” or “Placing Calls”, you can view tutorials on how to perform these operations using NISSAN Voice Recognition. 4-108 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (277,1)

SAA1859

Giving voice commands 1. Push the TALK steering wheel.

switch located on the

beep sounds.

Before starting To get the best recognition performance from NISSAN Voice Recognition, observe the follow- ing:

The interior of the vehicle should be as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noise and vibration sounds, etc.), which may prevent the system from correctly recognizing the voice commands.

. Wait until the tone sounds before speaking a

SAA2533

command.

. Speak in a natural conversational voice

without pausing between words.

If the air conditioner is set to “Auto”, the fan speed is automatically lowered so that your commands can be recognized more easily.

Useful tips for correct operation You can display useful speaking tips to help the system recognize your voice commands cor- rectly.

Select “Help on Speaking” to start display.

USING THE SYSTEM Initialization When the ignition switch is pushed to the ON position, NISSAN Voice Recognition is initia- lized, which may take up to one minute. When completed, the system is ready to accept voice switch is pushed commands. If the TALK before the initialization completes, the display will show the message: “System not ready.” or a

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-109

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (278,1)

detailed information of the each command.

How to speak numbers:

Operating tips: . Say a command after the tone. . Commands that are available are always shown on the display and spoken through voice menu prompts. Commands other than those that are displayed are not accepted. Please follow the prompts given by the system.

the command is not

If the system announces, “Please say again”. Repeat the command in a clear voice.

recognized,

NISSAN Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples.

General rule

Only single digits 0 (zero) to 9 can be used. (For example, if you would like to say 500, “five zero zero” can be used, but “five hundred” cannot.)

Examples

1-800-662-6200

— “One eight zero zero six six two six two

. Push the BACK button once to return to the

zero zero”

SAA2535

2. A list of commands appears on the screen, and the system announces, “Would you like to access Phone, Navigation, Information, Audio or Help?”.

3. After the tone sounds and the icon on the , speak a

to

screen changes from command.

Selecting the “Practice” key will start the practice mode. See “Let’s Practice” earlier in this section.

4. Continue to follow the voice menu prompts and speak after the tone sounds until your desired operation is completed.

Selecting the “Help” key can display the

previous screen.

To exit the voice recognition system, push and hold the TALK switch. The message, “Voice canceled” will be an- nounced.

To skip the voice guidance function and give the command immediately, press the TALK the system. Re-

switch to interrupt

member to speak after the tone.

to adjust

the volume of

If you want the system feedback, push the volume control buttons [+] or [−] on the steering switch or use the audio system volume knob while the system is making an announcement.

4-110 Center display, heater, air conditioner, audio, phone and voice recognition systems

Improving Recognition of Phone numbers

You can improve the recognition of phone numbers by saying the phone number in three groups of numbers. For example, when you try to call 800-662-6200, say “eight zero zero” first, and the system will then ask you for the next three digits. Then, say “six six two”. After recognition, the system will then ask for the last four digits. Say, “six two zero zero”. Using this method of phone digit entry can improve recognition performance.

When speaking a house number, speak the If the letter “o (Oh)” is number “0” as “zero”. included in the house number, it will not be recognized as the number “0 (zero)” even if you

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (279,1)

speak “oh” instead of “zero”. Please speak “zero” for the number “0 (zero)”, “oh” for the letter “o (oh)”.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-111

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (280,1)

Command List

Category Command:

Command

Phone

Navigation

Information

Audio

Help

. Phone Command:

Action

Operates the Phone function

Operates the Navigation function

Displays the vehicle Information function

Operates the Audio function.

Displays User Guide

Command

Dial Number

Vehicle Phonebook

Handset Phonebook Call history

Action

Makes a call to a spoken phone number up to 10 digits.

Makes a call to a contact that is stored in the Vehicle Phonebook.

Makes a call to a contact that is stored in the mobile phone.

Incoming Calls

Outgoing Calls

Missed Calls

Makes a call to the incoming call number.

Makes a call to the dialed number.

Makes a call to the Missed calls number.

International Call

Change Number

Makes an international call by allowing more than 10 digits to be spoken.

Corrects the recognized phone number (available during phone number entry).

4-112 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (281,1)

. Navigation Command:

Command

Home

Address

Places

Address Book

Previous Destinations

Information Command:

Command

Fuel Economy

Maintenance

Traffic Information

Where am I?

. Audio Command:

Command

AM

FM

XM Music Box® CD

Action

Sets a route to your home that is stored in the Address Book.

Searches for a location by the street address specified, and sets a route to the location.

Sets a route to a facility near the current vehicle location.

Searches for stored information in the Address Book.

Sets a route to a previous destination.

Action

Displays fuel economy information.

Displays maintenance information.

Turns the traffic information system ON and OFF.

Displays your current location.

Action

Turns to the AM band, selecting the station last played.

Turns to the FM band, selecting the station last played.

Turns to the XM Satellite band, selecting the channel last played. Turns on the Music Box® hard drive audio system. Starts to play a CD.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-113

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (282,1)

. General Commands

Command

Go back

Exit

Action

Corrects the last recognition result to return to the previous screen

Cancels Voice Recognition

4-114 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (283,1)

Voice command examples To use the NISSAN Voice Recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations by voice commands are described here.

For navigation system commands, see the separate Navigation System Owner’s Manual.

SAA1859

SAA2535

Example 1 - Placing a call to the phone number 800-662-6200:

2. The system announces, “Would you like to Information,

access Phone, Navigation, Audio or Help?”

1. Push the TALK steering wheel.

switch located on the

3. Speak “Phone”.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-115

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (284,1)

SAA2536

SAA2537

SAA2538

4. Speak “Dial Number”.

5. Speak “8 0 0”.

Selecting the “Manual Controls” key switches the screen to the keypad to input the phone number manually.

6. The system announces, “Please say the next three digits or dial, or say change number.”

7. Speak “6 6 2”.

4-116 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (285,1)

. You can only say a phone number using the 3-3-4 grouping, 7 digits, and 10 digits using this command. Please use the “International Call” command for all other formats.

If you say “Change Number” during phone number entry, the system will automatically request that you repeat the number using the 3-3-4 format. In this case please say the area code first and then follow the prompts. . Do not add a “1” in front of the area code

when speaking phone numbers.

SAA2539

SAA2540

8. The system announces, “Please say the last

10. The system announces, “Dial or Change

four digits” or say change number.

Number?”

9. Speak “6 2 0 0”.

11. Speak “Dial”.

the system does not

If recognize your command, please try repeating the com- mand using a natural voice. Speaking too slow or too loudly may further decrease recognition performance.

12. The system makes a call to 800-662-6200.

Note: . You can also speak “800-662-6200” (10
continuous digits) or “662-6200” (7 con- tinuous digits), the area code is not necessary. However, the 3-3-4 digit group- ing is recommended for improved recogni- tion. (See “How to speak numbers” earlier in this section.)

if

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-117

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (286,1)

SAA1859

SAA2535

SAA2536

Example 2 - Placing an international call to the phone number 011-81-111-222-3333:

2. The system announces, “Would you like to Information or

access Phone, Navigation, Help?”

1. Push the TALK steering wheel.

switch located on the

3. Speak “Phone”.

4. Speak “International Call”.

4-118 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (287,1)

NISSAN VOICE RECOGNITION AL- TERNATE COMMAND MODE The following section is applicable when Alter- nate Command Mode is activated.

When Alternate Command Mode is activated, an expanded list of commands can be used after In this mode, pressing the TALK available commands are not fully shown on the display or prompted. Review the expanded command list when this mode is active. See examples of Alternate Command Mode screens.

switch.

Please note that in this mode the recognition success rate may be affected as the number of available commands and ways of speaking each command are increased. To improve the recog- nition success rate, try using the Speaker Adaptation Function available in that mode. (See “Speaker adaptation function (for Alternate Command Mode)” later in this section.) Other- wise it is recommended that Alternate Com- mand Mode be turned OFF and Standard Mode be used for the best recognition performance.

5. Speak “011811112223333”.

6. Speak “Dial”.

SAA2541

SAA2542

7. System makes a call to 011-81-111-222-

3333.

Note:

Any digit International Number input process.

format

input

is available in the

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-119

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (288,1)

SAA2529

SAA2543

SAA2544

Activating Alternate Command Mode When the Standard Mode is active, perform the following steps to switch to the Alternate Command Mode.

1. Push the SETTING button on the instrument

panel.

2. Highlight the “Others” key.

3. Highlight the “Voice Recognition” key.

4. Highlight the “Alternate Command Mode”

1. Push the INFO button on the instrument

key.

panel.

5. The confirmation message is displayed on the screen. Push the “OK” key to activate the Alternate Command Mode.

Displaying command list If you are controlling the system by voice commands for the first time or do not know the appropriate voice command, perform the follow- ing procedure for displaying the voice command list (available only in Alternate Command Mode).

2. Select the “Others” key.

3. Select the “Voice Recognition” key.

4. Select the “Command List” key.

4-120 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (289,1)

5. Select a category from the list.

6. Select an item.

SAA2545

SAA2546

7.

If necessary, scroll the screen using the multi-function controller to view the entire list.

8. Press the BACK button to return to the

previous screen.

Center display, heater, air conditioner, audio, phone and voice recognition systems 4-121

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (290,1)

Command List

Phone Commands:

Dial Number

Vehicle Phonebook

Handset Phonebook Call History

Command

Action

Makes a call to a spoken phone number.

Makes a call to a contact that is stored in the Vehicle Phonebook.

Makes a call to a contact that is stored in the mobile phone.

Incoming Calls

Outgoing Calls

Missed Calls

Makes a call to the incoming call number.

Makes a call to the dialed number.

Makes a call to the Missed calls number.

International Call

Makes an international call by allowing more than 10 digits to be spoken.

Navigation Commands:

Command

Home

Address

Places

Address Book

Previous Destinations

Previous Start Point

Delete Destination

Sets a route to your home that is stored in the Address Book.

Searches for a location by the street address specified, and sets a route to the location.

Action

Sets a route to a facility near the current vehicle location.

Searches for stored information in the Address Book.

Sets a route to a previous destination.

Sets a route to a previous starting point.

Deletes a destination.

4-122 Center display, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2010/ 7/ 23

Black plate (291,1)

Information Commands:

Command

Fuel Economy

Maintenance

Where am I?

Traffic Information

Weather Information

Weather Map

Audio Commands:

Action

Displays fuel economy information.

Displays maintenance information.

Displays your current location.

Turns the traffic information system ON and OFF.

Displays weather information.

Displays a weather map.

Music Box®