2009 Nissan Maxima Owners Manual

The setting mode allows you to set reminders or preferences for alerts, maintenance intervals or language displays.

to move

In the setting mode screen press to: ● Alert ● Maintenance ● Display

and press

to select the menu.

Alert mode The alert mode allows you to set alerts notifying you of time to rest or icy conditions. The time to rest alert lets you know when you have been traveling for a long time and may need a break. The icy alert notifies you that icy driving condi- tions may exist.

Reset mode The reset mode can be selected in any screen that allows for preferences to be programmed. Once the screen is selected, you have the option to reset the selected distances or time to a new setting.

Instruments and controls 2-19

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

LIC1045

LIC1047

LIC1098

Maintenance mode The maintenance mode allows you to set alerts for the reminding of maintenance intervals for the following: ● engine oil ● oil filter ● tires ● other

to high- Set a desired interval by pushing light the maintenance field and pressing The reset mode will open up and allow you to enter the desired distance.

2-20 Instruments and controls

Display mode The LANGUAGE/UNIT screen will appear when selecting and pressing Language: English or French Unit: US — mile, °F, MPG

“Language/Unit”

the

key

Metric — km, °C, L/100 km

button and pressing

You can select the language and unit using the The settings are automatically saved when you exit the menu by pressing the BACK button or any other mode button.

Warning mode The warning mode can be selected to view any warnings that may be present. Once the screen is selected you have the option of skipping the warning or viewing it in detail. Warnings can be present for issues such as an open door or low fuel. For more information about potential warnings see “Vehicle Information Dis- play indicator lights and warnings” later in this section.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

Vehicle information display warnings and indicators 1. Door and trunk open warning 2. Push warning 3. Low fuel warning

4. Low windshield washer fluid warning

5. No key warning 6. Parking brake warning 7. Shift P warning 8. Engine start operation indicator

WIC1407
9. NISSAN Intelligent Key™ insertion indicator

10. NISSAN Intelligent Key™ removal indicator

11. NISSAN Intelligent Key™ battery discharge

indicator

12. Steering lock release malfunction indicator Instruments and controls 2-21

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

Door and trunk open warning

No key warning

SHIFT P warning

This warning illuminates when a door or the trunk has been opened when the engine is running. Push warning

After the Shift P warning illuminates, the Push warning will illuminate if the ignition switch is placed in the ACC position when the shift selec- tor is moved to the P (Park) position.

See “Shift P warning” in this section for additional information.

To turn off the Push warning, place the ignition switch in the ON position and then to the LOCK position. Low fuel warning This warning illuminates when the fuel level in the fuel tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches E (Empty). There will be a small re- serve of fuel in the tank when the fuel gauge needle reaches E (Empty). Low windshield washer fluid warning This warning illuminates when the windshield washer fluid is at a low level. Add windshield washer fluid as necessary. See “Window washer fluid” in the “Maintenance and do-it-yourself” section of this manual. 2-22 Instruments and controls

This warning illuminates following two condi- tions:

1. When the ignition switch is pushed and the Intelligent Key cannot be recognized by the system. If this warning illuminates, you can- not start the engine.

Check for the following causes and perform the assigned remedies:

This warning illuminates when the ignition switch is pushed to stop the engine with the shift selec- tor in any position except in the P (Park) position.

If this warning illuminates, the ignition switch is in the OFF position. Move the shift selector to the P (Park) position or push the ignition switch to the ON position.

An inside warning chime will also sound.

– The battery of the Intelligent Key carried with you is discharged completely. Re- place the battery with a new one.

If the shift selector is moved to the P (Park) position, the Push warning will appear. Refer to “Push warning” in this section.

– The Intelligent Key carried with you is not registered to the system. Use the regis- tered Intelligent Key.

– You do not have an Intelligent Key with

you. Carry an Intelligent Key with you.

2. When the door is closed with the Intelligent Key left outside the vehicle and the ignition switch is placed in the ACC or ON position. A chime will also sound.

Parking brake warning

This warning illuminates when the parking brake is set and the vehicle is driven.

For additional information about Intelligent Key, see “NISSAN Intelligent Key™” in the “Pre-driving checks and adjustments” section. Engine start operation indicator

This indicator illuminates when the ignition switch is in the LOCK, OFF, ACC or ON position with the shift selector in the P (Park) position.

This indicator means that the engine will start by pushing the push-button ignition switch with the brake pedal depressed.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

NISSAN Intelligent Key™ insertion indica- tor

This indicator illuminates when the Intelligent Key needs to be inserted into the Intelligent Key port. (For example, the Intelligent Key battery is dis- charged.)

If this indicator illuminates, insert the Intelligent Key into the Intelligent Key port in the correct direction. See “Push-button ignition switch” in the “Starting and driving” section. NISSAN Intelligent Key™ removal indicator

This indicator illuminates when the driver’s door is opened with the ignition switch placed in the OFF position and the Intelligent Key placed in the Intelligent Key port. A key reminder chime also sounds.

If this indicator illuminates, remove the Intelligent Key from the Intelligent Key port and take it with you when leaving the vehicle. NISSAN Intelligent Key™ battery discharge indicator

This indicator illuminates when the Intelligent Key battery is running out of power.

If this indicator illuminates, replace the battery with a new one. See “NISSAN Intelligent Key™” in the “Maintenance and do-it-yourself” section.

SECURITY SYSTEMS

Steering lock release malfunction indica- tor This indicator illuminates when the steering wheel cannot be released from the LOCK posi- tion. If this indicator illuminates, push the ignition switch while lightly turning the steering wheel right and left.

LIC0301
Your vehicle has two types of security systems: ● Vehicle security system ● NISSAN Vehicle Immobilizer System VEHICLE SECURITY SYSTEM The vehicle security system provides visual and audible alarm signals if someone opens the doors or trunk lid when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs. The system helps deter vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations. Al- Instruments and controls 2-23

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

ways secure your vehicle even if parking for a brief period. Never leave your Intelligent Key in the vehicle, and always lock the vehicle when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible.

Many devices offering additional protection, such as component locks, identification markers, and tracking systems, are available at auto supply stores and specialty shops. Your NISSAN dealer may also offer such equipment. Check with your insurance company to see if you may be eligible for discounts for various theft protection features. How to arm the vehicle security system 1. Close all windows. (The system can be armed even if the windows are open.)

2. Remove the Intelligent Key from the vehicle. 3. Close all doors, hood and trunk. Lock all doors. The doors can be locked with the Intelligent Key, door handle request switch, power door lock switch or mechanical key. light comes on. The security light stays on for about 30 seconds. The vehicle security sys- tem is now pre-armed. After about 30 sec- onds the vehicle security system automati- cally shifts into the armed phase. The

the security indicator

4. Confirm that

2-24 Instruments and controls

security light begins to flash once every 3
seconds. If, during the 30-second pre-arm time period, the driver’s door is unlocked by the key or the keyfob, or the ignition switch is placed in the ACC or ON position, the sys- tem will not arm.

● Even when the driver and/or passen- gers are in the vehicle, the system will activate with all the doors, hood and trunk lid locked with the ignition switch placed in the LOCK position. When placing the ignition switch in the ACC or ON position, the system will be released.

Vehicle security system activation The vehicle security system will give the following alarm: ● The headlights blink and the horn sounds

intermittently.

● The alarm automatically turns off after ap- proximately 50 seconds. However, the alarm reactivates if the vehicle is tampered with again. The alarm can be shut off by unlocking the driver’s door or trunk lid with the key, or by pressing the button on the Intelli- gent Key.

The alarm is activated by: ● opening the door or trunk lid without using the key or Intelligent Key (even if the door is unlocked by releasing the door inside lock switch).

How to stop an activated alarm The alarm stops only by unlocking the driver’s door or the trunk lid with the key, pressing the button on the Intelligent Key, or press- ing the request switch on the driver’s or passen- ger’s door with the Intelligent Key in range of the door handle. NISSAN VEHICLE IMMOBILIZER SYSTEM The NISSAN Vehicle Immobilizer System will not allow the engine to start without the use of a registered key. If the engine fails to start using a registered key (for example, when interference is caused by another registered key, an automated toll road device or automatic payment device on the key ring), restart the engine using the following procedures: 1. Leave the ignition switch placed in the ON

position for approximately 5 seconds.

2. Place the ignition switch in the OFF or LOCK position and wait approximately 10
seconds.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key.

If the no start condition re-occurs, NISSAN rec- ommends placing the registered key on a sepa- rate key ring to avoid interference from other devices. Statement related to Section 15 of FCC Rules for NISSAN Vehicle Immobilizer Sys- tem (CONT ASSY — IMMOBILIZER, ANT ASSY — IMMOBILIZER) This device complies with part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the follow- ing two conditions; (1) This device may not cause harmful in- terference, and (2) this device must accept any interference received, including inter- ference that may cause undesired opera- tion of the device. CHANGES OR MODIFICATIONS NOT EX- PRESSLY APPROVED BY THE PARTY RE- SPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPER- ATE THE EQUIPMENT.

WINDSHIELD WIPER AND WASHER SWITCH

LIC0474

WIC1434

Security indicator light The security indicator light blinks whenever the ignition switch is placed in the OFF, LOCK or ACC position. This function indicates the NISSAN Ve- hicle Immobilizer System is operational. If the NISSAN Vehicle Immobilizer System is mal- functioning, the light will remain on while the ignition switch is placed in the ON position. If the light still remains on and/or the en- gine will not start, see a NISSAN dealer for NISSAN Vehicle Immobilizer System ser- vice as soon as possible. Please bring all registered keys that you have when visiting your NISSAN dealer for service.

SWITCH OPERATION The windshield wiper and washer operates when the ignition switch is in the ON position.

Push the lever down to operate the wiper at the following speed: 䊊1

Intermittent — intermittent operation can be adjusted by turning the knob toward 䊊A (Slower) or 䊊B (Faster). Also, the intermit- tent operation speed varies in accordance with the vehicle speed. (For example, when the vehicle speed is high, the intermittent operation speed will be faster.)

Instruments and controls 2-25

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

NOTE: You can turn on or turn off the driving speed dependent intermittent wiper func- tion for vehicles with navigation system. Refer to “Vehicle electronic systems” in the “Display screen, heater, air conditioner, au- dio and phone systems” section later in this manual. 䊊2
Low — continuous low speed operation 䊊3 High — continuous high speed operation Push the lever up 䊊4 to have one sweep opera- tion of the wiper. Pull the lever toward you 䊊5
to operate the washer. The wiper will also operate several times.

WARNING

In freezing temperatures the washer solu- tion may freeze on the windshield and obscure your vision which may lead to an accident. Warm the windshield with the defroster before you wash the windshield.

CAUTION

● Do not operate the washer continu-

ously for more than 30 seconds.

● Do not operate the washer if the reser-

voir tank is empty.

● Do not fill the window washer reservoir tank with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the window washer reser- voir tank.

● Pre-mix washer fluid concentrates with water to the manufacturer’s recom- mended levels before pouring the fluid into the window washer reservoir tank. Do not use the window washer reservoir tank to mix the washer fluid concen- trate and water.

2-26 Instruments and controls

REAR WINDOW AND OUTSIDE MIRROR (if so equipped) DEFROSTER SWITCH

Type A

LIC1387

To defrost the rear window glass and outside mirrors (if so equipped), start the engine and push the rear window defroster switch on. The rear window defroster light on the switch comes on. Push the switch again to turn the defroster off.

indicator

The rear window defroster automatically turns off after approximately 15 minutes.

CAUTION

When cleaning the inner side of the rear window, be careful not to scratch or dam- age the rear window defroster.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

Type B

LIC1388

NOTE: The top few rows of wires on the rear win- dow are not part of the rear window de- froster system. These wires make up the antenna for the audio system.

● The life of xenon headlights will be shortened by frequent on-off opera- tion. It is generally desirable not to turn off the headlights for short intervals (for example, when the vehicle stops at a traffic signal).

● If the xenon headlight bulb is close to burning out, the brightness will drasti- cally decrease, the light will start blink- ing, or the color of the light will be- come reddish. If one or more of the above signs appear, contact a NISSAN dealer.

HEADLIGHT AND TURN SIGNAL SWITCH

XENON HEADLIGHTS (if so equipped)

WARNING

ᏘHIGH VOLTAGE

● When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xe- non headlights replaced at a NISSAN dealer.

● Xenon headlights provide considerably more light than conventional head- lights. If they are not correctly aimed, they might temporarily blind an oncom- ing driver or the driver ahead of you and cause a serious accident. If headlights are not aimed correctly, immediately take your vehicle to a NISSAN dealer and have the headlights adjusted correctly.

When the xenon headlight is initially turned on, its brightness or color varies slightly. However, the color and brightness will soon stabilize.

Instruments and controls 2-27

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

CAUTION

Use the headlights with the engine run- ning to avoid discharging the vehicle battery.

Type A

Type B

WIC1435

WIC1436

HEADLIGHT CONTROL SWITCH Lighting 䊊1 When turning the switch to the

posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊2 When turning the switch to the

posi- tion, the headlights come on and all the other lights remain on.

2-28 Instruments and controls

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

To turn on the autolight system: 1. Place the headlight switch in the AUTO po-

sition 䊊1 .

2. Place ignition in the ON position. 3. The autolight system automatically turns the

headlights on and off.

Initially, if the ignition switch is placed in the OFF position and a door is opened and left open, the headlights remain ON for 5 minutes. If another door is opened during the 5 minutes, then the 5
minute timer is reset. To turn the autolight system off, turn the switch to the OFF,

position.

, or

LIC1086

Autolight system The autolight system allows the headlights to be set so they turn on and off automatically. The autolight system can: ● Turn on the headlights, front parking, tail, license plate and instrument panel lights au- tomatically when it is dark.

● Turn off all the lights when it is light. ● Keep all the lights on for 45 seconds after you place the ignition switch in the OFF position and all doors are closed.

WHA1170
Be sure you do not put anything on top of the autolight sensor located on the top side of the instrument panel. The autolight sen- sor controls the autolight; if it is covered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the engine off and the ignition switch placed in the ON position, your vehicle’s battery could be- come discharged.

Instruments and controls 2-29

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

WIC1438

Headlight beam select 䊊1 To select the high beam function, push the lever forward. The high beam lights come on and the

light illuminates.

䊊2 Pull the lever back to select the low beam. 䊊3 Pulling and releasing the lever flashes the

headlight high beams on and off.

Battery saver system If the ignition switch is placed in the OFF position while the headlight switch is in the or 5 minutes. 2-30 Instruments and controls

position, the headlights will turn off after

CAUTION

WARNING

When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.

Even though the battery saver feature au- tomatically turns off the headlights after a period of time, you should turn the head- light switch to the OFF position when the engine is not running to avoid discharging the vehicle battery.

DAYTIME RUNNING LIGHT SYSTEM (Canada only) The headlights automatically illuminate at a re- duced intensity when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the position. Turn the OFF position or in the headlight switch to the position for full illumination when driving at night.

If the parking brake is applied before the engine is started, the daytime running lights do not illumi- nate. The daytime running lights illuminate when the parking brake is released. The daytime run- ning lights will remain on until the ignition switch is placed in the OFF position.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

WIC1412

WIC1439

INSTRUMENT BRIGHTNESS CONTROL The instrument cluster illuminates when the igni- tion switch is in the ON position. The instrument brightness control operates when the the AUTO, Turn the control left or right to adjust the bright- ness of the instrument panel lights when driving at night. The instrument brightness control will not adjust the brightness when the headlights or parking lights are off.

headlight or

position.

control

switch

in

is

TURN SIGNAL SWITCH Turn signal 䊊1 Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signals cancel automatically.

Lane change signal 䊊2 To signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the lever does not latch.

position.

WIC1440
FOG LIGHT SWITCH (if so equipped) To turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the To turn the fog lights on with the headlight switch in the AUTO position, the headlights must be on, then turn the fog light switch to the To turn the fog lights off, turn the fog light switch to the OFF position. The headlights must be on and the low beams selected for the fog lights to operate. The fog lights automatically turn off when the high beam headlights are selected.

position.

Instruments and controls 2-31

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

HAZARD WARNING FLASHER SWITCH

HORN

The flashers will operate with the ignition switch placed in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving.

LIC0394
Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash.

WARNING

● If stopping for an emergency, be sure to

move the vehicle well off the road.

● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.

● Turn signals do not work when the haz-

ard warning flasher lights are on.

2-32 Instruments and controls

LIC1389
To sound the horn, push the center pad area of the steering wheel.

WARNING

Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. Tam- pering with the supplemental front air bag system may result in serious personal injury.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

CLIMATE CONTROL SEAT SWITCH (if so equipped)

LIC1410
The climate controlled seat warms up or cools down the front seat by blowing warm or cool air from the surface of the seat. The climate control switch is located on the center console. The climate controlled seat can be operated as follows: 1. Start the engine. 2. Turn the control knob to the H (Heat) side or to the C (Cool) side, as desired. The indica- tor light on the control knob will illuminate.

3. Adjust the desired amount of air using the control knob. The climate controlled seat blower remains on low speed for approxi- mately 60 seconds after turning the switch on or selecting the desired temperature.

4. When the vehicle’s interior is warmed or cooled, or before you leave the vehicle, be sure to turn the control knob to the Off (center) position

To check the air filter for the climate controlled seat, contact a NISSAN dealer.

CAUTION

● The battery could run down if the cli- mate control seat is operated while the engine is not running.

● Do not use the climate control seat for extended periods or when no one is using the seat.

● Do not put anything on the seat which insulates heat, such as a blanket, cush- ion, seat cover, etc. Otherwise, the seat may become overheated.

● Do not place anything hard or heavy on the seat or pierce it with a pin or similar objects. This may result in damage to the climate controlled seat.

● Any liquid spilled on the seat should be

removed immediately with a dry cloth

● The climate controlled seat has an air filter. Do not operate the climate con- trolled seat without an air filter. This may result in damage to the system.

● When cleaning the seat, never use gasoline, benzine, thinner, or any simi- lar materials.

● If any malfunctions are found or the climate controlled seat does not oper- ate, turn the switch off and have the system checked by your NISSAN dealer.

Instruments and controls 2-33

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

HEATED SEATS (if so equipped)

HEATED STEERING WHEEL (if so equipped)

WIC1441
The front seats are warmed by built-in heaters (if so equipped). The switch is located on the center console.

1. Start the engine.

2. Push the LO or HI position of the switch, as desired. The indicator light in the switch will illuminate.

The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on.

3. When the seat is warmed or before you leave

the vehicle, be sure to turn the switch off.

2-34 Instruments and controls

CAUTION

● Do not use the seat heater for extended periods or when no one is using the seat.

● Do not put anything on the seat which insulates heat, such as a blanket, cush- ion, seat cover, etc. Otherwise, the seat may become overheated.

● Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in damage to the heater.

● Any liquid spilled on the heated seat should be removed immediately with a dry cloth.

● When cleaning the seat, never use gasoline, benzine, thinner, or any simi- lar materials.

● If any abnormalities are found or the heated seat does not operate, turn the switch off and have the system checked by your NISSAN dealer.

● The battery could run down if the seat heater is operated while the engine is not running.

LIC0421
The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below 68°F (20°C).

The heated steering wheel switch is located on the front of the console box.

Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light will come on. If the surface temperature of the steering wheel is below 68°F (20°C), the system will heat the steering wheel to approximately 86°F (30°C), and cycle off and on to maintain a temperature above 68°F (20°C). The indicator light will remain on as long as the system is on.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/21/08—tbrooks 墍

Push the switch again to turn the heated steering wheel system off manually. The indicator light will go off.

NOTE: If the surface temperature of the steering wheel is above 68°F (20°C) when the switch is turned on, the system will not heat the steering wheel. This is not a malfunction.

VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH

indicator will come on.

To turn off the VDC system, push the VDC OFF switch. The Push the VDC OFF switch again or restart the engine to turn on the system. See “Vehicle Dy- namic Control (VDC) system” in the “Starting and driving” section.

WIC0534
The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driv- ing conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off.

Instruments and controls 2-35

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/21/08—tbrooks 墍

POWER OUTLET

STORAGE

CAUTION

● The outlet and plug may be hot during

or immediately after use.

● The power outlets are not designed for

use with a cigarette lighter.

● Do not use with accessories that ex- ceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory.

● Use power outlets with the engine run- ning to avoid discharging the vehicle battery.

● Avoid using power outlets when the air conditioner, headlights or rear window defroster is on.

● Before inserting or disconnecting a plug, be sure the electrical accessory being used is turned OFF.

● Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal temperature fuse may open.

● When not in use, be sure to close the cap. Do not allow water to contact the outlet.

LIC1392

Front center console

The power outlets are for powering electrical accessories such as cellular telephones. They are rated at 12 Volt, 120 W (10A) maximum. The power outlet in the front console box is powered directly by the vehicle battery. The out- let on the center console near the shift selector is powered only when the ignition switch is in the ACC or ON position.

2-36 Instruments and controls

MAP POCKETS

LIC1393

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/21/08—tbrooks 墍

CAUTION

● Do not use for anything other than

sunglasses.

● Do not leave sunglasses in the sun- glasses holder while parking in direct sunlight. The heat may damage the sunglasses.

LIC0016

WIC0253

SEATBACK POCKETS The seatback pockets are located on the back of the driver’s and passenger’s seats. The pockets can be used to store maps.

SUNGLASSES HOLDER (if so equipped) To open the sunglasses holder, push and release.

WARNING

● Keep the sunglasses holder closed

while driving to prevent an accident.

Instruments and controls 2-37

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

CUP HOLDERS

Front

LIC1395

CAUTION

● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger.

● Use only soft cups in the cup holder. Hard objects can injure you in an accident.

2-38 Instruments and controls

To open the front cup holders, push the cup holder lid. To close, lower the cup holder lid and push down until it clicks in place. The rear cup holders are located in the fold-down armrest in the rear seat back.

Rear

LIC0423

To open the cup holders on the rear fold-down armrest, lift the cup holder lid. To close, lower the lid.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

LIC1396

WIC1120

LIC0702

GLOVE BOX Open the glove box by pulling the handle. Use the mechanical key when locking 䊊1 or unlocking 䊊2
the glove box.

WARNING

Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop.

CONSOLE BOX

Upper half Pull up on the driver’s side latch to open the upper half of the console box. The upper half of the console box may be used for storage of cellular phones. An access hole is provided at the front of the upper half of the console box for a phone or I-Pod姞 cord routing to the power outlet.

Lower half Pull up on the lever to open the lower half of the console box. A power outlet is located inside the console box and there is storage for compact discs.

Instruments and controls 2-39

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

LIC0748

GROCERY HOOKS The grocery hooks are located in the trunk and can be used to hang a standard size plastic grocery bag.

CAUTION

Do not apply a total load of more than 20
lbs (9 kg) to a single grocery hook.

2-40 Instruments and controls

WIC1032

LIC1226

Side cargo net

The cargo net helps keep packages in the cargo area from moving around while the vehicle is in motion.

Main cargo net

CARGO NETS (if so equipped)

WARNING

● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury.

● Be sure to secure all four hooks into the retainers. The cargo restrained in the net must not exceed 30 lbs. (13.6 kg) or the net may not stay secured.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

WINDOWS

POWER WINDOWS

WARNING

● Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows.

● Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls and become trapped in a window. Unattended chil- dren could become involved in serious accidents.

The power windows operate when the ignition switch is placed in the ON position, or for about 45 seconds after the ignition switch is placed in the OFF position. If the driver’s or passenger’s door is opened during this period of about 45
seconds, power to the windows is canceled.

LIC0802
To install a cargo net, attach the net to the retain- ers. To remove a cargo net, detach the net from the retainers.

LIC1397

1. Window lock button 2. 3. 4.

Power door lock switch Driver’s side automatic window switch Front passenger’s side automatic win- dow switch Left rear passenger’s side automatic window switch Right rear passenger’s side automatic window switch

5.

6.

Instruments and controls 2-41

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close all of the windows. To open a window, push the switch to the first detent and continue to hold down until the de- sired window position is reached. To close a window, pull the switch to the first detent and continue to hold up until the desired window position is reached.

2-42 Instruments and controls

LIC1398

LIC1399

Front passenger’s power window switch The passenger’s window switch operates only the corresponding passenger’s window. To open the window, push the switch to the first detent and continue to hold it down until the desired position is reached 䊊1 . To close the window, pull the switch to the first detent and continue to hold up until the desired window position is reached 䊊2 .

Rear power window switch The rear power window switches open or close only the corresponding windows. To open the window, push the switch to the first detent and continue to hold it down until the desired window position is reached 䊊1 . To close the window, pull the switch to the first detent and continue to hold up until the desired window position is reached 䊊2 . Locking passengers’ windows When the window lock button is depressed, only the driver’s side window can be opened or closed. Push it again to cancel the window lock function.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

LIC0410

Automatic operation To fully open a window equipped with automatic operation, press the window switch down (only driver’s side shown) to the second detent and release it; it need not be held. The window auto- matically opens all the way. To stop the window, lift the switch up while the window is opening.

To fully close a window equipped with automatic operation, pull the switch up to the second detent and release it; it need not be held. To stop the window, press the switch down while the window is closing.

Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs.

WARNING

There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window.

If the vehicle’s battery is disconnected, replaced, or jump started, the power window auto-reverse function may not operate properly. If this occurs, please contact to re-initialize the power window auto-reverse system.

the dealer

If the control unit detects something caught in a window equipped with automatic operation as it is closing, the window will be immediately low- ered.

If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the fol- lowing procedure to initialize the power window system. 1. Place the ignition switch in the ON position. 2. Close the door. 3. Open the window more than halfway by

operating the power window switch.

4. Pull the power window switch and hold it to close the window, and then hold the switch for more than 3 seconds after the window is closed completely.

5. Release the power window switch. Operate the window by automatic function to confirm the initialization is complete.

6. Perform steps 2 through 5 above for other

windows.

If the power window automatic function does not operate properly after performing the above pro- cedure, have your vehicle checked by a NISSAN dealer.

Instruments and controls 2-43

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

MOONROOF (if so equipped)

LIC1408

AUTOMATIC MOONROOF The moonroof will only operate when the ignition switch is placed in the ON position. The auto- matic moonroof is operational for about 45 sec- onds, even if the ignition switch is placed in the ACC or OFF position. If the driver’s door or the front passenger’s door is opened during this period of about 45 seconds, power to the moon- roof is canceled. Sliding the moonroof To fully open the moonroof, push the switch toward

䊊1 .

2-44 Instruments and controls

To fully close the moonroof, push the switch toward

䊊2 .

To open or close the moonroof part way, push the switch in any direction while the moonroof is sliding to stop it in the desired position. Tilting the moonroof Close the moonroof by pushing the switch 䊊2 . Release the switch, then push toward 䊊2 again to tilt the the switch toward moonroof up.

To tilt toward

the moonroof down, push the switch

䊊1 .

WARNING

● In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints.

● Do not allow anyone to stand up or extend any portion of their body out of the moonroof opening while the vehicle is in motion or while the moonroof is closing.

CAUTION

● Remove water drops, snow, ice or sand

from the moonroof before opening.

● Do not place heavy objects on the

moonroof or surrounding area.

Auto-reverse function (when closing or tilting down the moonroof) The auto-reverse function can be activated when the moonroof is closed or tilted down by auto- matic operation when the ignition switch is placed in the ON position or for about 45 sec- onds after the ignition switch is placed in the OFF position. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the moonroof occurs.

WARNING

There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the moonroof.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

When closing: If the control unit detects something caught in the moonroof as it moves to the front, the moonroof will immediately open backward. When tilting down: If the control unit detects something caught in the moonroof as it tilts down, the moonroof will im- mediately tilt up. If the auto-reverse function malfunctions and re- peats opening or tilting up the moonroof, keep pushing the tilt down switch within 5 seconds after it happens; the moonroof will fully close gradually. Make sure nothing is caught in the moonroof. Sunshade Open and close the sunshade by sliding it for- ward or backward. If the moonroof does not close Have your NISSAN dealer check and repair the moonroof.

DUAL PANEL MOONROOF (if so equipped)

LIC1411

AUTOMATIC MOONROOF The moonroof will only operate when the ignition switch is in the ON position. The automatic moonroof is operational for about 45 seconds, even if the ignition switch is placed in the ACC or OFF position. If the driver’s door or the front passenger’s door is opened during this period of about 45 seconds, power to the moonroof is canceled.

Sliding the moonroof To slide the moonroof: ● To fully open the moonroof, push the switch 䊊1 toward the open position until it reaches is the second detent. pushed to the first detent, only the sunshade will open.

the switch 䊊1

If

● To fully close the moonroof, push the switch 䊊2 toward the close position until it reaches is the second detent. pushed to the first detent, the moonroof will close but the sunshade will remain open.

the switch 䊊2

If

● To open or close the moonroof part way, release the switch 䊊1 or 䊊2 while the moon- roof is sliding open or closed. The moonroof will stop at the desired position.

Tilting the moonroof To tilt the moonroof: ● To tilt the moonroof up, push and release the tilt switch 䊊3 . When the moonroof is open, it will automatically close and then tilt up.

● To tilt the moonroof down, push and release the tilt switch 䊊3 or push the switch 䊊2
toward the close position until it reaches the first detent.

Instruments and controls 2-45

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

CAUTION

● Remove water drops, snow, ice or sand

from the moonroof before opening.

● Do not place heavy objects on the

moonroof or surrounding area.

● To tilt the moonroof down and close the sunshade at the same time, push the switch 䊊2 to the close position until it reaches the second detent.

Auto-reverse function (when closing or tilting down the moonroof) The auto-reverse function can be activated when the moonroof is closed or tilted down by auto- matic operation when the ignition switch is placed in the ON position or for about 45 sec- onds after the ignition switch is placed in the OFF position. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the moonroof occurs.

WARNING

There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the moonroof.

When closing:

If the control unit detects something caught in the moonroof as it moves to the front, the moonroof will immediately open backward. When tilting down:

If the control unit detects something caught in the moonroof as it tilts down, the moonroof will im- mediately tilt up.

If the auto-reverse function malfunctions and re- peats opening or tilting up the moonroof, keep pushing the tilt down switch within 5 seconds after it happens; the moonroof will fully close gradually. Make sure nothing is caught in the moonroof.

WARNING

● In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints.

● Do not allow anyone to stand up or extend any portion of their body out of the moonroof opening while the vehicle is in motion or while the moonroof is closing.

2-46 Instruments and controls

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/21/08—tbrooks 墍

WIC1445

Sunshade To open the sunshade: ● To fully open the sunshade, push the switch 䊊1 toward the open position until it reaches the first detent.

● To fully open the sunshade and the moon- roof together, push the switch 䊊1 toward the open position until it reaches the second detent.

To close the sunshade: ● To fully close the sunshade, push the switch 䊊2 toward the close position until it reaches the second detent.

● Pushing the switch 䊊2 to the first detent will

close the moonroof only.

If the moonroof does not close Have your NISSAN dealer check and repair the moonroof.

REAR CONTROL CANCEL SWITCH (if so equipped)

LIC1391
The rear control cancel switch operates when the ignition switch is placed in the ACC or ON posi- tion. The rear control cancel switch is located on the left side of the instrument panel. Pushing the rear control cancel switch to the CANCEL side will deactivate the following switches in the rear center armrest: ● Automatic climate control ● Audio Pushing the rear control cancel switch to the ON side restores the control to the rear center arm- rest.

Instruments and controls 2-47

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

REAR POWER SUN SHADE (if so equipped)

INTERIOR LIGHT

WIC1443
The rear sun shade operates when the ignition switch is in the ACC or ON position.

The rear sun shade switch is located on the front console. ● To raise the sun shade, push the upper side

of the switch 䊊1 .

● To lower the sun shade, push the lower side

of the switch 䊊2 .

● The switch need not be held down.

2-48 Instruments and controls

CAUTION

● Do not place objects (such as newspa- pers, handkerchiefs, etc.) on the screen inlet port. Doing so may entangle these objects in the screen when it is extend- ing or retracting, causing improper op- eration or damage to the screen.

● Do not push the sun shade arm with your hands, etc., as this may deform it. Improper operation or damage to the screen may result.

● Do not hang any object on the arm rail as this may result in improper operation or damage the screen.

● Do not forcefully pull the screen. Doing so may elongate the screen. Improper operation or damage to the screen may result.

● To avoid personal

injury, keep your hands, fingers and head away from the sun shade arm, arm rail and screen inlet port.

● Do not allow children near the rear sun

shade system. They could be injured.

● Do not pull or push the rear sun shade. This could cause improper operation or damage it.

LIC1081
The interior light has a three-position switch and operates regardless of ignition switch position. ● When the switch is in the ON position 䊊1 , the front and rear personal lights will illumi- nate, regardless of door position. The light will go off after 30 minutes unless the igni- tion switch is placed in the ON position.

● When the switch is in the center DOOR position 䊊2 , the front and rear personal lights will illuminate under the following con- ditions:

– Driver’s door is unlocked while the igni- tion switch is placed in the OFF position.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/21/08—tbrooks 墍

Lights remain on for a maximum of 30
seconds.

– Driver’s door is opened.

Lights remain on for a maximum of 30
seconds after driver’s door is closed.

– Ignition switch is placed in the OFF posi-

tion. Lights remain on for a maximum of 30
seconds.

NOTE: The footwell and doorstep lights illuminate when the driver and passenger doors are opened regardless of the interior light switch position. These lights will turn off automatically after 30 minutes while doors are open to prevent the battery from be- coming discharged.

CAUTION

The lights will go off when the ignition switch is in the ON position, or the driver’s door is closed and locked.

Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.

The lights will also go off after 30 minutes when doors are open. ● When the switch is in the OFF position 䊊3 , lights will not

the front and rear personal illuminate, regardless of door position.

WIC1476

CONSOLE LIGHT The console light 䊊1 will turn on whenever the parking lights or headlights are illuminated. The console light brightness can be adjusted with the illumination brightness control.

Instruments and controls 2-49

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

PERSONAL LIGHTS

Models with moonroof

Models with dual panel moonroof

WIC1494

LIC1409

FRONT To turn the map lights on, press the switches. To turn them off, press the switches again.

CAUTION

Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.

2-50 Instruments and controls

LIC1413

REAR To turn on the rear lights, press and release the switch 䊊1 . To turn the rear lights off, press and release the switch 䊊1 .

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

TRUNK LIGHT

The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light goes off. The light will go off after about 30 minutes if the trunk lid is left open, unless the ignition switch is in the ON position. For bulb replacement procedures, refer to “Exte- rior and interior lights” in the “Maintenance and do-it-yourself” section of this manual.

HOMELINK姞 UNIVERSAL TRANSCEIVER (if so equipped)

The HomeLink姞 Universal Transceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. HomeLink姞 Universal Transceiver: ● Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and se- curity systems.

● Is powered by your vehicle’s battery. No separate batteries are required. If the vehi- cle’s battery is discharged or is discon- nected, HomeLink姞 will retain all program- ming.

Once the HomeLink姞 Universal Transceiver is programmed, retain the original trans- mitter for future programming procedures (Example: new vehicle purchases). Upon sale of the programmed HomeLink姞 Universal Transceiver buttons should be erased for security purposes. For additional information, refer to “Program- ming HomeLink姞” later in this section.

the vehicle,

WARNING

● Do not use the HomeLink姞 Universal Transceiver with any garage door opener that lacks safety stop and re- verse features as required by federal safety standards. (These standards be- came effective for opener models manufactured after April 1, 1982). A ga- rage door opener which cannot detect an object in the path of a closing garage door and then automatically stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features in- creases the risk of serious injury or death.

● During the programming procedure your garage door or security gate will open and close (if the transmitter is within range). Make sure that people or objects are clear of the garage door, gate, etc. that you are programming.

● Your vehicle’s engine should be turned off while programming the HomeLink姞 Universal Transceiver.

Instruments and controls 2-51

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

5.

grammed device, press and hold the pro- grammed HomeLink姞 button — releasing when the device begins to activate. If the indicator light on the HomeLink姞 blinks rapidly for 2 seconds and then turns solid, HomeLink姞 has picked up a “rolling code” garage door opener signal. You will need to proceed with the next steps to train the HomeLink姞 to complete the programming which may require a ladder and another per- son for convenience.

6. Press and release the “smart” or “learn” pro- gram button located on the garage door opener’s motor to activate the “training mode”. This button is usually located near the antenna wire that hangs down from the motor. If the wire originates from under a light lens, you will need to remove the lens to access the program button.

NOTE: Once you have pressed and released the program button on the garage door open- er’s motor and the “training light” is lit, you have 30 seconds in which to perform step 7. Use the help of a second person for conve- nience to assist when performing this step.

WIC0986

PROGRAMMING HOMELINK姞 1. To begin, press and hold the two outer HomeLink姞 buttons (to clear the memory) until the indicator light 䊊1 blinks (after 20
seconds). Release both buttons.

2. Position the end of the hand-held transmitter 1 - 3 inches (26 - 76 mm) away from the HomeLink姞 surface.

2-52 Instruments and controls

WIC0987
3. Using both hands, simultaneously press and hold both the HomeLink姞 button you want to program and the hand-held transmitter but- ton.

DO NOT release the buttons until step 4 has been completed.

4. Hold down both buttons until the indicator light on the HomeLink姞 flashes, changing from a “slow blink” to a “rapidly flashing blink”. This could take up to 90 seconds. When the indicator light flashes rapidly, both buttons may be released. The rapidly flash- ing light indicates successful programming. To activate the garage door or other pro-

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

7. Within 30 seconds of pressing and releas- ing the garage door opener’s program but- ton, quickly and firmly press and release the HomeLink姞 button you’ve just programmed. Press and release the HomeLink姞 button up to 3 times to complete the training.

8. Your HomeLink姞 button should now be pro- grammed. (To program the remaining HomeLink姞 buttons for additional door or gate openers, follow steps 2-4 only.)

all

previously

NOTE: Do not repeat step 1 unless you want to “clear” programmed HomeLink姞 buttons. If you have any questions or are having difficulty programming your HomeLink姞 buttons, refer to the HomeLink姞 web site at: www.homelink.com or call 1-800-355-3515. PROGRAMMING HOMELINK姞 FOR CANADIAN CUSTOMERS Prior to 1992, D.O.C. regulations required hand- held transmitters to stop transmitting after 2 sec- onds. To program your hand-held transmitter to HomeLink姞, continue to press and hold the HomeLink姞 button (see steps 2 - 4 under “Pro- gramming HomeLink姞”) while you press and re- press (“cycle”) your hand-held transmitters every

2 seconds until the indicator light flashes rapidly (indicating successful programming).

NOTE:

When programming a garage door opener, etc., it is advised to unplug the device dur- ing the “cycling” process to prevent pos- sible damage to the garage door opener components. OPERATING THE HOMELINK姞 UNIVERSAL TRANSCEIVER The HomeLink姞 Universal Transceiver (once pro- grammed) may now be used to activate the ga- rage door, etc. To operate, simply press the ap- propriate programmed HomeLink姞 Universal Transceiver button. The red indicator light will illuminate while the signal is being transmitted. PROGRAMMING TROUBLE- DIAGNOSIS If the HomeLink姞 does not quickly learn the hand- held transmitter information: ● replace the hand-held transmitter batteries

with new batteries.

● press and hold both the HomeLink姞 and hand-held transmitter buttons without inter- ruption.

● position the hand-held transmitter 1 - 3
inches (26 - 76 mm) away from the HomeLink姞 surface. Hold the transmitter in that position for up to 15 seconds. If HomeLink姞 is not programmed within that time, try holding the transmitter in another position – keeping the indicator light in view at all times.

If you continue to have programming difficulties, please contact the NISSAN Consumer Affairs Department. The phone numbers are located in the Foreword of this manual. CLEARING THE PROGRAMMED INFORMATION Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds).

● position the hand-held transmitter with its from the

facing

away

battery HomeLink姞 surface.

area

Instruments and controls 2-53

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

This transmitter has been tested and com- plies with FCC and DOC/MDC rules. Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment. DOC: ISTC 1763K1313
FCC I.D. CV2V67690

REPROGRAMMING A SINGLE HOMELINK姞 BUTTON To reprogram a HomeLink姞 Universal Transceiver button, complete the following. 1. Press and hold the desired HomeLink姞 but- ton. Do not release the button until step 4
has been completed.

2. When the indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter 1 - 3 inches (26 - 76
mm) away from the HomeLink姞 surface.

3. Press and hold the hand-held transmitter

button.

4. The HomeLink姞 indicator light will flash, first slowly and then rapidly. When the indicator light begins to flash rapidly, release both buttons.

The HomeLink姞 Universal Transceiver button has now been reprogrammed. The new device can be activated by pushing the HomeLink姞 button that was just programmed. This procedure will not affect any other programmed HomeLink姞 buttons.

IF YOUR VEHICLE IS STOLEN If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLink姞. Consult the Owner’s Manual of each device or call the manu- facturer or dealer of those devices for additional information. When your vehicle is recovered, you will need to reprogram the HomeLink姞 Univer- sal Transceiver with your new transmitter information. FCC Notice: This device complies with FCC rules part 15
and RSS-210 of Industry Canada. Opera- tion is subject to the following two condi- tions: (1) This device may not cause harmful in- terference and (2) This device must accept any interference that may be received, in- cluding interference that may cause undes- ired operation.

2-54 Instruments and controls

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/21/08—tbrooks 墍

3 Pre-driving checks and adjustments

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
NISSAN Intelligent Key™ . . . . . . . . . . . . . . . . . . . . . . . . 3-2
NISSAN Vehicle Immobilizer System keys . . . . . . . . . 3-3
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Locking with key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Locking with inside lock knob . . . . . . . . . . . . . . . . . . . . 3-5
Locking with power door lock switch . . . . . . . . . . . . . 3-5
Child safety rear door lock. . . . . . . . . . . . . . . . . . . . . . . 3-6
Automatic door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
NISSAN Intelligent Key™ . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Operating range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Door locks/unlocks precaution . . . . . . . . . . . . . . . . . . . 3-9
NISSAN Intelligent Key™ Operation. . . . . . . . . . . . . . 3-10
How to use the remote keyless entry function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Warning signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18
Trunk lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

Opener operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19
Secondary trunk lid release (if so equipped) . . . . . . 3-20
Interior trunk lid release . . . . . . . . . . . . . . . . . . . . . . . . 3-20
Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
Opening the fuel-filler door . . . . . . . . . . . . . . . . . . . . . 3-21
Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
Tilt/telescopic steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Automatic operation (if so equipped). . . . . . . . . . . . . 3-23
Manual operation (if so equipped) . . . . . . . . . . . . . . . 3-23
Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Automatic anti-glare rearview mirror . . . . . . . . . . . . . 3-25
Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Automatic drive positioner (if so equipped) . . . . . . . . . . 3-28
Memory storage function . . . . . . . . . . . . . . . . . . . . . . . 3-29
Entry/exit function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30
System operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

KEYS

WPD0363

Two Intelligent Keys

1. 2. Mechanical keys with built-in transpon-

der chip (inside Intelligent Keys) Key number plate

3.

3-2 Pre-driving checks and adjustments

CAUTION

● Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function.

● Do not drop the Intelligent Key. ● Do not strike the Intelligent Key sharply

against another object.

● Do not place the Intelligent Key for an extended period in an area where tem- peratures exceed 140°F (60°C).

● Do not attach the Intelligent Key with a

key holder that contains a magnet.

● Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV, audio equipment and personal computers.

NISSAN INTELLIGENT KEY™ Your vehicle can only be driven with the Intelligent Keys which are registered to your vehicle’s Intel- ligent Key system components and NISSAN Ve- hicle Immobilizer System components. Never leave these keys in the vehicle.

As many as 4 Intelligent Keys can be registered and used with one vehicle. The new keys must be registered by a NISSAN dealer prior to use with the Intelligent Key system and NISSAN Vehicle Immobilizer System of your vehicle. Since the registration process requires erasing all memory in the Intelligent Key components when register- ing new keys, be sure to take all Intelligent Keys that you have to the NISSAN dealer.

A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record key numbers so it is very important to keep track of your key number plate.

A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, your NISSAN dealer can duplicate it.

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍

CAUTION

Always carry the mechanical key installed in the Intelligent Key slot. Valet hand-off When you have to leave a key with a valet, give them the Intelligent Key itself and keep the me- chanical key with you to protect your belongings. To prevent the glove box and the trunk from being opened during valet hand-off, follow the proce- dures below. 1. Push the trunk cancel switch to the OFF

position.

2. Remove the mechanical key from the Intelli-

gent Key.

3. Lock the glove box and the trunk pass-

through with the mechanical key.

SPA1951

Mechanical key The Intelligent Key contains the mechanical key, which can be used in case of a discharged bat- tery.

To remove the mechanical key, release the lock knob on the back of the Intelligent Key.

4. Hand the Intelligent Key to the valet and

keep the mechanical key with you.

To install the mechanical key, firmly insert it into the Intelligent Key until the lock knob returns to the lock position.

The mechanical key can be used for operation in the same way as an ordinary key.

See “Trunk lid” later in this section, “Storage” in the “Instruments and controls” section and “Seats” in the “Safety — seats, seat belts and supplemental restraint system” section.

NISSAN VEHICLE IMMOBILIZER SYSTEM KEYS You can only drive your vehicle using the master keys which are registered to the NISSAN Vehicle Immobilizer System components in your vehicle. These keys have a transponder chip in the key head.

The master key can be used for all the locks.

To protect belongings when you leave a key with someone, give them the Intelligent Key only, not the mechanical key. Never leave these keys in the vehicle.

Additional or replacement keys:

If you still have a key, the key number is not necessary when you need extra NISSAN Vehicle Immobilizer System keys. Your dealer can dupli- cate your existing key. As many as four NISSAN Vehicle Immobilizer System keys can be used with one vehicle. You should bring all NISSAN Vehicle Immobilizer System keys that you have to your NISSAN dealer for registration. This is be- cause the registration process will erase the memory of all key codes previously registered into the NISSAN Vehicle Immobilizer System. After the registration process, these components will only recognize keys coded into the NISSAN Vehicle Immobilizer System during registration. Pre-driving checks and adjustments 3-3

墌 REVIEW COPY—2009 Maxima (max) Owners Manual—USA_English (nna) 10/20/08—debbie 墍