Download PDF Manual

Owners Manual—USA_English (nna) 03/05/07—arosenma X


LIC0556


LIC0557


WIC1197


2nd row bench (if so equipped)


3rd row


Bottle holder


CAUTION


c Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. c Do not use bottle holder for open liquid


containers.


2-48 Instruments and controls


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


To reinstall the 2nd row center console box: 1. Slide the console box over the base toward


the rear of the vehicle.


2. Push down to lock the console box in place. 3. Replace the cup holder tray.


LIC0576
2ND ROW CENTER CONSOLE (if so equipped) Pull up on the lever to open the console box lid.


LIC0577
Removing the 2nd row center console box To remove the 2nd row center console box: s1
s2 Pull up on the handle to tilt the console box


Lift out the cup holder tray.


up.


s3 Move the console box toward the front of the


vehicle and lift it out.


Instruments and controls 2-49


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


WARNING


c Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or col- lision, unsecured cargo could cause personal injury.


c Use suitable ropes and hooks to secure


cargo.


c Never allow anyone to ride in the lug- gage area. It is extremely dangerous to ride in a cargo area inside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.


c Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.


c The child restraint top tether strap may be damaged by contact with items in the cargo area. Secure any items in the cargo area. Your child could be seri- ously injured or killed in a collision if the top strap is damaged.


c Be sure everyone in your vehicle is in a


seat and using a seat belt properly.


LIC0571


CARGO AREA STORAGE BIN To open the cargo area storage bin, pull down on the tab and pull the lid off.


LIC0572
To access the floor storage area, push down s1
to raise the handle, then pull up on the handle s2
to lift the luggage board. LUGGAGE HOOKS The luggage hooks can be used to secure cargo with ropes or other types of straps.


2-50 Instruments and controls


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


LTI0089


LTI0090


Side finisher When hooking on ropes, do not apply a load of more than 55 lb (245 N) to a single sA hook or 44
lb (196 N) to a single sB hook.


Floor hooks Do not apply a load of more than 110 lb (490 N) to a single hook.


Instruments and controls 2-51


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


WARNING


c Drive extra carefully when the vehicle is loaded at or near the cargo carrying capacity, especially if the significant portion of that load is carried on the roof rack.


c Heavy loading of the roof rack has the potential to affect the vehicle stability and handling during sudden or abnor- mal handling maneuvers.


c Roof


rack load should be evenly


distributed.


ROOF RACK


2-52 Instruments and controls


c Do not exceed maximum roof rack load


weight capacity.


c Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury.


LIC1177


CAUTION


Use care when placing or removing items from the roof rack. If you cannot comfort- ably lift the items onto the roof rack from the ground, use a ladder or stool.


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


Always distribute the luggage evenly on the roof rack. Do not load more than 200 lbs (91 kg) on entire roof rack. Be sure load is evenly distributed across both crossbars. Be careful that your ve- hicle does not exceed the Gross Vehicle Weight Rating (GVWR) or its Gross Axle Weight Rating (GAWR front and rear). The GVWR and GAWR are located on the F.M.V.S.S. label (located on the driver(cid:146)s door pillar). For more information regarding GVWR and GAWR, refer to (cid:147)Vehicle loading information(cid:148) in the (cid:147)Technical and con- sumer information(cid:148) section later in this manual.


WINDOWS


POWER WINDOWS


WARNING


c Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows.


c Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls and become trapped in a window. Unattended chil- dren could become involved in serious accidents.


The power windows operate when the ignition switch is in the ON position, or for about 45
seconds after the ignition switch is turned to the OFF position. If the driver(cid:146)s or passenger(cid:146)s door is opened during this period of about 45 sec- onds, power to the windows is canceled.


Instruments and controls 2-53


LIC1200
The crossbars can be adjusted forward and backward. Loosen the thumbwheel s1 and ad- just the crossbar to the desired position. Tighten the thumbwheel. Place your luggage on the bars and secure the luggage with rope to the utility loops s2 . Do not place luggage on the side rails or tie rope directly to the side rails. Always be sure the thumbwheels are fully tightened to keep the crossbar in place. Do not use utility loops for any purpose other than securing luggage.


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


LIC1181


WIC1237


WIC1255


Power door lock switch Front passenger side automatic switch Right rear passenger window switch Left rear passenger window switch Driver side automatic switch


1. Window lock button 2. 3. 4. 5. 6. Driver(cid:146)s side power window switch The driver(cid:146)s side control panel is equipped with switches to open or close the front and rear passenger windows. To open a window, push the switch and hold it down. To close a window, pull the switch and hold it up. To stop the opening or closing function at any time, simply release the switch. 2-54 Instruments and controls


Front passenger(cid:146)s power window switch The passenger(cid:146)s window switch operates only the corresponding passenger(cid:146)s window. To open the window, push the switch and hold it down s1 . To close the window, pull the switch up s2 . Locking passengers(cid:146) windows When the window lock button is depressed, only the driver(cid:146)s side window can be opened or closed. Push it again to cancel the window lock function.


Rear power window switch The rear power window switches open or close only the corresponding windows. To open the window, push the switch and hold it down s1 . To close the window, pull the switch up s2 .


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs.


WARNING


There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window.


If the control unit detects something caught in a window equipped with automatic operation as it is closing, the window will be immediately low- ered.


LIC0410


Automatic operation To fully open a window equipped with automatic operation, press the window switch down (only driver(cid:146)s side shown) to the second detent and release it; it need not be held. The window auto- matically opens all the way. To stop the window, lift the switch up while the window is opening.


To fully close a window equipped with automatic operation, pull the switch up to the second detent and release it; it need not be held. Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation.


WIC0675


POWER VENT WINDOWS (if so equipped) Use the vent window switch located on the over- head console to open and close the power vent windows. The windows cannot be operated separately. To open the power vent windows, press and hold the switch toward OPEN. To close the windows, press and hold the switch toward CLOSE.


Instruments and controls 2-55


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


The power vent windows operate when the igni- tion key is in the ON position, or for about 45
seconds after the ignition key is turned to the OFF position. If the driver(cid:146)s or passenger(cid:146)s door is opened during this 45 second period, power to the vent windows is cancelled.


SUNROOF (if so equipped)


LIC0524


WIC0812


MANUAL VENT WINDOWS (if so equipped) To open a manual vent window, pull the latch handle toward you until it releases. To lock the window in the open position, push the latch handle rearward until it locks. To close a manual vent window, pull the latch handle toward you and push the rear portion of the latch toward the rear of the vehicle until it locks.


AUTOMATIC SUNROOF The sunroof will only operate when the ignition switch is in the ON position. The automatic sun- roof is operational for about 45 seconds, even if the ignition switch is turned to the ACC or OFF position. If the driver(cid:146)s door or the front passen- ger(cid:146)s door is opened during this period of about 45 seconds, power to the sunroof is canceled. Sliding the sunroof To fully open the sunroof, push the switch toward the open position s3 . To fully close the sunroof, push the switch toward the close position s4 .


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


2-56 Instruments and controls


To open or close the sunroof part way, push the switch in any direction s5 while the roof is sliding open or closed to stop it in the desired position. Tilting the sunroof To tilt the sunroof up, push the tilt switch toward the up position s1 . When the sunroof is open, it will automatically close and then tilt up.


To tilt the sunroof down, push the tilt switch toward the down position s2 . Restarting the sunroof sliding switch The sliding switch will become inoperable after the battery terminal is disconnected, the electri- cal supply interrupted and/or some abnormality detected. Use the following reset procedure to return sunroof operation to normal.


1.


If the sunroof lid is open, push the tilting switch repeatedly toward the down position s2 to fully close the lid.


2. Push and hold the tilting switch for more than 2 seconds toward the down position s2 to reestablish the lid(cid:146)s home position. The sunroof should now operate normally.


Auto reverse function (when closing or tilting down the sunroof) The auto reverse function can be activated when the sunroof is closed or tilted down by automatic operation when the ignition key is in the ON position or for about 45 seconds after the ignition key is turned to the OFF position. Depending on the environment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the sunroof oc- curs.


WARNING


There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the sunroof.


When closing: If the control unit detects something caught in the sunroof as it moves to the front, the sunroof will immediately open backward. When tilting down: If the control unit detects something caught in the sunroof as it tilts down, the sunroof will immedi- ately tilt up.


If the auto reverse function malfunctions and re- peats opening or tilting up the sunroof, keep pushing the tilt down switch within 5 seconds after it happens; the sunroof will fully close gradu- ally. Make sure nothing is caught in the sunroof.


WARNING


c In an accident you could be thrown from the vehicle through an open sunroof. Al- ways use seat belts and child restraints. c Do not allow anyone to stand up or ex- tend any portion of their body out of the sunroof opening while the vehicle is in motion or while the sunroof is closing.


CAUTION


c Remove water drops, snow, ice or sand


from the sunroof before opening.


c Do not place heavy objects on the sun-


roof or surrounding area.


Sunshade Open and close the sunshade by sliding it for- ward or backward. If the sunroof does not close Have your NISSAN dealer check and repair the sunroof.


Instruments and controls 2-57


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


INTERIOR LIGHT


LIC0585


The interior light has a three-position switch and operates regardless of ignition switch position. When the switch is in the ON position s1 , the interior lights illuminate, regardless of door posi- tion. The lights will go off after about 30 minutes unless the ignition key is in the ACC or ON position. When the switch is in the DOOR position s2 , the interior lights and puddle lamps (if so equipped) will stay on for about 30 seconds when: c The doors are unlocked by the keyfob, a key or the power door lock switch while all doors


2-58 Instruments and controls


NOTE: The footwell lights (if so equipped) and door step lights illuminate when the driver and passenger doors are open regardless of the interior light switch position. These lights will turn off automatically after about 30 minutes while doors are open to prevent the battery from becoming discharged.


CAUTION


Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.


are closed and the ignition switch is in the OFF position.


c The driver(cid:146)s door is opened and then closed while the key is removed from the ignition switch.


c The key is removed from the ignition switch


while all doors are closed.


The lights will turn off while the 30 second timer is activated when: c The driver(cid:146)s door is locked by the keyfob, a


key, or the power door lock switch.


c The ignition switch is turned ON. When the switch is in the OFF position s3 , the interior lights do not illuminate, regardless of door position. The puddle lamps (if so equipped) come on when any front or rear passenger door is opened.


The lights will turn off automatically after 30 min- utes while doors are open to prevent the battery from becoming discharged.


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


PERSONAL LIGHTS


MAP LIGHTS


LIC0587


CONSOLE LIGHT The console light s1 will turn on whenever the parking lights or headlights are illuminated. The console light brightness can be adjusted with the illumination brightness control.


LIC0588
The personal lights on the overhead console can be swiveled 360 degrees. To turn on the light, press the button. Press the button again to turn off the light.


LIC0586
To turn the map lights on, press the switches. To turn them off, press the switches again.


CAUTION


Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.


Instruments and controls 2-59


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


CARGO LIGHT


LIC0590
The cargo light on the overhead trim has a three- position switch. To operate, push the switch to the desired position. ON: The light is illuminated. Normal (center) position: The light illuminates when the lift gate or glass hatch is opened. The light turns off when the lift gate or glass hatch is closed. OFF: The light does not illuminate regardless of lift gate position or lock status.


2-60 Instruments and controls


HOMELINKT UNIVERSAL TRANSCEIVER


The HomeLinkT Universal Transceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. HomeLinkT Universal Transceiver: c Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and se- curity systems.


c Is powered by your vehicle(cid:146)s battery. No separate batteries are required. If the vehi- cle(cid:146)s battery is discharged or is discon- nected, HomeLinkT will retain all program- ming.


Once the HomeLinkT Universal Transceiver is programmed, retain the original trans- mitter for future programming procedures (Example: new vehicle purchases). Upon sale of the programmed HomeLinkT Universal Transceiver buttons should be erased for security purposes. For additional information refer to (cid:147)Program- ming HomeLinkT(cid:148) later in this section.


the vehicle,


WARNING


c Do not use the HomeLinkT Universal Transceiver with any garage door opener that lacks safety stop and re- verse features as required by federal safety standards. (These standards be- came effective for opener models manufactured after April 1, 1982). A ga- rage door opener which cannot detect an object in the path of a closing garage door and then automatically stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features in- creases the risk of serious injury or death.


c During the programming procedure your garage door or security gate will open and close (if the transmitter is within range). Make sure that people or objects are clear of the garage door, gate, etc. that you are programming.


c Your vehicle(cid:146)s engine should be turned off while programming the HomeLinkT Universal Transceiver.


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


WIC0986


PROGRAMMING HOMELINKT 1. To begin, press and hold the two outer HomeLinkT buttons (to clear the memory) until the indicator light s1 blinks (after 20
seconds). Release both buttons.


2. Position the end of the hand-held transmitter 1 - 3 inches (26 - 76 mm) away from the HomeLinkT surface.


WIC0987
3. Using both hands, simultaneously press and hold both the HomeLinkT button you want to program and the hand-held transmitter but- ton.


DO NOT release the buttons until step 4 has been completed.


4. Hold down both buttons until the indicator light on the HomeLinkT flashes, changing from a (cid:147)slow blink(cid:148) to a (cid:147)rapidly flashing blink(cid:148). This could take up to 90 seconds. When the indicator light flashes rapidly, both buttons may be released. The rapidly flash- ing light indicates successful programming. To activate the garage door or other pro- grammed device, press and hold the pro- grammed HomeLinkT button (cid:151) releasing when the device begins to activate. If the indicator light on the HomeLinkT blinks rapidly for 2 seconds and then turns solid, HomeLinkT has picked up a (cid:147)rolling code(cid:148) garage door opener signal. You will need to proceed with the next steps to train the HomeLinkT to complete the programming which may require a ladder and another per- son for convenience.


5.


6. Press and release the (cid:147)smart(cid:148) or (cid:147)learn(cid:148) pro- gram button located on the garage door opener(cid:146)s motor to activate the (cid:147)training mode(cid:148). This button is usually located near the antenna wire that hangs down from the motor. If the wire originates from under a light lens, you will need to remove the lens to access the program button.


Instruments and controls 2-61


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


NOTE: Once you have pressed and released the program button on the garage door open- er(cid:146)s motor and the (cid:147)training light(cid:148) is lit, you have 30 seconds in which to perform step 7. Use the help of a second person for conve- nience to assist when performing this step. 7. Within 30 seconds of pressing and releas- ing the garage door opener program button, quickly and firmly press and release the HomeLinkT button you(cid:146)ve just programmed. Press and release the HomeLinkT button up to 3 times to complete the training.


8. Your HomeLinkT button should now be pro- grammed. (To program the remaining HomeLinkT buttons for additional door or gate openers, follow steps 2-4 only.)


all


previously


NOTE: Do not repeat step 1 unless you want to (cid:147)clear(cid:148) programmed HomeLinkT buttons. If you have any questions or are having difficulty programming your HomeLinkT buttons, refer to the HomeLinkT web site at: www.homelink.com or call 1-800-355-3515.


PROGRAMMING HOMELINKT FOR CANADIAN CUSTOMERS Prior to 1992, D.O.C. regulations required hand- held transmitters to stop transmitting after 2 sec- onds. To program your hand-held transmitter to HomeLinkT, continue to press and hold the HomeLinkT button (note steps 2 - 4 under (cid:147)Pro- gramming HomeLinkT(cid:148)) while you press and re- press ((cid:147)cycle(cid:148)) your hand-held transmitters every 2 seconds until the indicator light flashes rapidly (indicating successful programming).


NOTE: When programming a garage door opener, etc., it is advised to unplug the device dur- ing the (cid:147)cycling(cid:148) process to prevent pos- sible damage to the garage door opener components. OPERATING THE HOMELINKT UNIVERSAL TRANSCEIVER The HomeLinkT Universal Transceiver (once pro- grammed) may now be used to activate the ga- rage door, etc. To operate, simply press the ap- propriate programmed HomeLinkT Universal Transceiver button. The amber indicator light will illuminate while the signal is being transmitted.


PROGRAMMING TROUBLE- DIAGNOSIS If the HomeLinkT does not quickly learn the hand- held transmitter information: c replace the hand-held transmitter batteries


with new batteries.


c position the hand-held transmitter with its from the


facing


away


battery HomeLinkT surface.


area


c press and hold both the HomeLinkT and hand-held transmitter buttons without inter- ruption.


c position the hand-held transmitter 1 - 3
inches (26 - 76 mm) away from the HomeLinkT surface. Hold the transmitter in that position for up to 15 seconds. If HomeLinkT is not programmed within that time, try holding the transmitter in another position (cid:150) keeping the indicator light in view at all times.


If you continue to have programming difficulties, please contact the NISSAN Consumer Affairs Department. The phone numbers are located in the Foreword of this manual.


2-62 Instruments and controls


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


This transmitter has been tested and com- plies with FCC and DOC/MDC rules. Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user(cid:146)s authority to op- erate the equipment. DOC: ISTC 1763K1313
FCC I.D. CV2V67690


IF YOUR VEHICLE IS STOLEN If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLinkT. Consult the Owner(cid:146)s Manual of each device or call the manu- facturer or dealer of those devices for additional information. When your vehicle is recovered, you will need to reprogram the HomeLinkT Univer- sal Transceiver with your new transmitter information. FCC Notice: This device complies with FCC rules part 15
and RSS-210 of Industry Canada. Opera- tion is subject to the following two condi- tions: (1) This device may not cause harmful in- terference and (2) This device must accept any interference that may be received, in- cluding interference that may cause undes- ired operation.


CLEARING THE PROGRAMMED INFORMATION Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). REPROGRAMMING A SINGLE HOMELINKT BUTTON To reprogram a HomeLinkT Universal Transceiver button, complete the following. 1. Press and hold the desired HomeLinkT but- ton. Do not release the button until step 4
has been completed.


2. When the indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter 1 - 3 inches (26 - 76
mm) away from the HomeLinkT surface.


3. Press and hold the hand-held transmitter


button.


4. The HomeLinkT indicator light will flash, first slowly and then rapidly. When the indicator light begins to flash rapidly, release both buttons.


The HomeLinkT Universal Transceiver button has now been reprogrammed. The new device can be activated by pushing the HomeLinkT button that was just programmed. This procedure will not affect any other programmed HomeLinkT buttons.


Instruments and controls 2-63


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


MEMO


2-64 Instruments and controls


3 Pre-driving checks and adjustments


Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Intelligent keys (if so equipped) . . . . . . . . . . . . . . . . . . 3-2
NISSAN vehicle immobilizer system keys . . . . . . . . . . 3-3
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Locking with key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Locking with inside lock knob . . . . . . . . . . . . . . . . . . . . 3-5
Locking with power door lock switch . . . . . . . . . . . . . 3-5
Child safety rear door lock. . . . . . . . . . . . . . . . . . . . . . . 3-6
Remote keyless entry system . . . . . . . . . . . . . . . . . . . . . . . 3-6
How to use remote keyless entry system . . . . . . . . . . 3-7
Intelligent Key system (if so equipped) . . . . . . . . . . . . . . 3-10
Operating range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Door locks/unlocks precaution . . . . . . . . . . . . . . . . . . 3-12
Intelligent Key operation . . . . . . . . . . . . . . . . . . . . . . . . 3-13
How to use the remote keyless entry function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
Warning signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 3-18
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20
Lift gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20


Operating the manual lift gate . . . . . . . . . . . . . . . . . . . 3-21
Operating the power lift gate (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
Cancel switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Lift gate release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Glass hatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Tilt operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Pedal position adjustment . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28
Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-29
Automatic anti-glare rearview mirror . . . . . . . . . . . . . 3-29
Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Automatic drive positioner (if so equipped) . . . . . . . . . . 3-31
Memory storage function . . . . . . . . . . . . . . . . . . . . . . . 3-31
Entry/exit function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33
System operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


KEYS


A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, your NISSAN dealer can duplicate it.


1.


WPD0128
Two master keys (black) with transpon- der chip and chrome NISSAN brand symbol on one side Valet key (black) with transponder chip Key number plate Transponder chip


2. 3. 4. A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record key numbers so it is very important to keep track of your key number plate.


3-2 Pre-driving checks and adjustments


WPD0427


Two Intelligent Keys


1. 2. Mechanical keys (inside Intelligent


Keys) Key number plate


3. INTELLIGENT KEYS (if so equipped) Your vehicle can only be driven with the Intelligent Keys which are registered to your vehicle(cid:146)s Intel- ligent Key system components and NISSAN Ve- hicle Immobilizer System components. As many as 4 Intelligent Keys can be registered and used with one vehicle. The new keys must be regis- tered by a NISSAN dealer prior to use with the Intelligent Key system and NISSAN Vehicle Im- mobilizer System of your vehicle. Since the reg-


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


istration process requires erasing all memory in the Intelligent Key components when registering new keys, be sure to take all Intelligent Keys that you have to the NISSAN dealer.


CAUTION


c Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function.


c Do not drop the Intelligent Key. c Do not strike the Intelligent Key sharply


against another object.


c Do not place the Intelligent Key for an extended period in an area where tem- peratures exceed 140(cid:176)F (60(cid:176)C).


c Do not attach the Intelligent Key with a


key holder that contains a magnet.


c Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV, audio equipment and personal computers.


CAUTION


Always carry the mechanical key installed in the Intelligent Key slot. Valet hand-off When you have to leave a key with a valet, give them the Intelligent Key itself and keep the me- chanical key with you to protect your belongings. To prevent the glove box or console box from being opened during valet hand-off, follow the procedures below. 1. Remove the mechanical key from the Intelli-


gent Key.


2. Lock the glove box or console box with the


mechanical key.


3. Hand the Intelligent Key to the valet and


keep the mechanical key with you.


See (cid:147)Storage(cid:148) in the (cid:147)Instruments and controls(cid:148) section. NISSAN VEHICLE IMMOBILIZER SYSTEM KEYS You can only drive your vehicle using the master or valet keys which are registered to the NISSAN Vehicle Immobilizer System components in your vehicle. These keys have a transponder chip in the key head. Pre-driving checks and adjustments 3-3


SPA1951


Mechanical key The Intelligent Key contains the mechanical key, which can be used in case of a discharged bat- tery.


To remove the mechanical key, release the lock knob on the back of the Intelligent Key.


To install the mechanical key, firmly insert it into the Intelligent Key until the lock knob returns to the lock position.


The mechanical key can be used for operation in the same way as an ordinary key.


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


DOORS


WARNING


c Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally open- ing the doors, and will help keep out intruders.


c Before opening any door, always look


for and avoid oncoming traffic.


c Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls. Unattended children could become involved in seri- ous accidents.


The master key can be used for all the locks.


The valet key cannot be used for the console box lock.


To protect belongings when you leave a key with someone, give them the valet key only. Never leave these keys in the vehicle. Additional or replacement keys: If you still have a key, the key number is not necessary when you need extra NISSAN Vehicle Immobilizer System keys. Your dealer can dupli- cate your existing key. As many as five NISSAN Vehicle Immobilizer System keys can be used with one vehicle. You should bring all NISSAN Vehicle Immobilizer System keys that you have to your NISSAN dealer for registration. This is be- cause the registration process will erase the memory of all key codes previously registered into the NISSAN Vehicle Immobilizer System. After the registration process, these components will only recognize keys coded into the NISSAN Vehicle Immobilizer System during registration. Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle. Do not allow the immobilizer system key, which contains an electrical transponder, to come into contact with salt water. This could affect system function. 3-4 Pre-driving checks and adjustments


Driver(cid:146)s side


LPD0240


LOCKING WITH KEY The power door lock system allows you to lock or unlock all doors at the same time. Turning the key toward the front s1 of the vehicle locks all doors. Turning the key one time toward the rear s2 of the vehicle unlocks that door. From that position, returning the key to neutral s3 (where the key can only be removed and inserted) and turning it toward the rear again within 5 seconds unlocks all doors s4 .


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


Opening and closing windows The driver(cid:146)s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. c To open the windows, turn the driver(cid:146)s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked. c To close the windows, turn the driver(cid:146)s door key to the front of the vehicle for longer than 1 second after the door is locked.


Windows stop when the key cylinder is released.


Inside lock


LPD0241


LOCKING WITH INSIDE LOCK KNOB To lock the door without the key, move the inside lock knob to the lock position s1 , then close the door. To unlock the door without the key, move the inside lock knob to the unlock position s2 .


WPD0381


LOCKING WITH POWER DOOR LOCK SWITCH To lock all the doors without a key, push the door lock switch (driver(cid:146)s or front passenger(cid:146)s side), to the lock position s1 . When locking the door this way, be certain not to leave the key inside the vehicle. To unlock all the doors without a key, push the door lock switch (driver(cid:146)s or front passenger(cid:146)s side) to the unlock position s2 .


Pre-driving checks and adjustments 3-5


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


Lockout protection When the power door lock switch (driver(cid:146)s or front passenger(cid:146)s side) is moved to the lock position with the key in the ignition and any door open, all doors will lock and then unlock auto- matically. This helps to prevent the keys from being accidently locked inside the vehicle.


3-6 Pre-driving checks and adjustments


LPD0420
CHILD SAFETY REAR DOOR LOCK Child safety locks help prevent the rear doors from being opened accidentally, especially when small children are in the vehicle. The child safety lock levers are located on the edge of the rear doors. When the lever is in the lock position, the door can be opened only from the outside.


REMOTE KEYLESS ENTRY SYSTEM


It is possible to lock/unlock all doors, turn on the interior lights and puddle lamps (if so equipped), and activate the panic alarm by using the keyfob from outside the vehicle.


Some settings for the keyfob, such as horn beep, can be adjusted. For vehicles without navigation system, refer to (cid:147)Silencing the horn beep feature(cid:148) later in this section. For vehicles with navigation system, refer to (cid:147)Comfort & convenience set- tings(cid:148) in the (cid:147)Display screen, heater, air condi- tioner and audio systems(cid:148) section later in this manual. Be sure to remove the key from the vehicle before locking the doors.


The keyfob can operate at a maximum distance of approximately 33 ft (10 m) from the vehicle. The effective distance depends upon the conditions around the vehicle.


As many as 5 keyfobs can be used with one vehicle. For information concerning the purchase and use of additional keyfobs, contact a NISSAN dealer.


The keyfob will not function when: c the battery is discharged. c the distance between the vehicle and the


keyfob is over 33 ft (10 m).


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


The panic alarm will not activate when the key is in the ignition switch.


CAUTION


Listed below are conditions or occur- rences which will damage the keyfob: c Do not allow the keyfob to become wet. c Do not drop the keyfob. c Do not strike the keyfob sharply against


another object.


c Do not place the keyfob for an extended period in an area where temperatures exceed 140(cid:176)F (60(cid:176)C).


If a keyfob is lost or stolen, NISSAN rec- ommends erasing the ID code of that key- fob. This will prevent the keyfob from un- authorized use to unlock the vehicle. For information regarding the erasing proce- dure, please contact a NISSAN dealer.


LPD0209


HOW TO USE REMOTE KEYLESS ENTRY SYSTEM Locking doors 1. Close all windows. 2. Remove the key from the ignition switch. 3. Close the hood and all doors. 4. Push the


button on the keyfob. All the doors lock. The hazard warning lights flash twice and the horn beeps once to indicate all doors are locked.


c When the


button is pushed with all doors locked, the hazard warning lights flash twice and the horn beeps once as a re- minder that the doors are already locked.


c If a door is open and you push the


button, the doors will lock but the horn will not beep and the hazard warning lights will not flash.


The horn may or may not beep. For vehicles without navigation system, refer to (cid:147)Silencing the horn beep feature(cid:148) later in this section. For ve- hicles with navigation system, refer to (cid:147)Comfort & convenience settings(cid:148) in the (cid:147)Display screen, heater, air conditioner and audio systems(cid:148) sec- tion later in this manual.


Pre-driving checks and adjustments 3-7


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


button on the keyfob.


The door windows will open while pressing the The door windows cannot be closed by using the keyfob. Linking the keyfob to automatic drive positioner memory If the vehicle is equipped with automatic drive positioner, the keyfob can be linked to a memory setting. See (cid:147)Automatic drive positioner(cid:148) later in this sec- tion.


button on the keyfob again within


Push the 5 seconds. c All doors unlock. c The hazard warning lights flash once if all


doors are completely closed.


The interior lights can be turned off without wait- ing 30 seconds by inserting the key into the ignition and turning to the ON or START position, locking the doors with the keyfob or pushing the interior light switch to the off position. Auto relock When the button on the keyfob is pushed, all doors will lock automatically within 1 minute unless one of the following operations is per- formed: c Any door is opened. c A key is inserted into the ignition switch and


the key is turned from OFF to ON.


Opening windows The keyfob allows you to open windows equipped with automatic operation simulta- neously. c To open the windows, press the


but- ton on the keyfob for longer than 3 sec- onds after all doors are unlocked.


LPD0210


button on the keyfob once.


Unlocking doors Push the c Only the driver(cid:146)s door unlocks. c The hazard warning lights flash once if all doors are completely closed with the ignition key in any position except the ON position. c The interior lights and puddle lamps (if so equipped) turn on and the light timer acti- vates for 30 seconds when the interior light switch is in the DOOR position with the ignition key in any position except the ON position.


3-8 Pre-driving checks and adjustments


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


LPD0243


LPD0211


LPD0262


Operating the power lift gate (if so equipped) Push and hold the button on the keyfob for about 0.5 second to open or close the lift gate. The hazard warning lights flash and a chime sounds to indicate the power open or power close se- quence has started. The lift gate will reverse direction immediately during power open or power close if the keyfob button is pressed. A chime will sound to an- nounce the reversal. For more information, see (cid:147)Lift gate(cid:148) later in this section.


Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pushing and holding the button on the keyfob for longer than 0.5 second. The panic alarm and headlights will stay on for 25
seconds. The panic alarm stops when: c it has run for 25 seconds, or c any button is pushed on the keyfob.


Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the keyfob.


NOTE: If you change the horn beep and lamp flash feature with the keyfob, the display screen (if so equipped) will not show the current mode and cannot be used to change the mode. Use the keyfob to return to the pre- vious mode and re-enable the display screen control. To deactivate: Press and hold the and Pre-driving checks and adjustments 3-9


buttons for at least 2 seconds.


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


buttons for at least 2 seconds


The hazard warning lights will flash three times to confirm that the horn beep feature has been deactivated. To activate: Press and hold the and once more. The hazard warning lights will flash once and the horn will sound once to confirm that the horn beep feature has been reactivated. Deactivating the horn beep feature does not si- lence the horn if the alarm is triggered. Using the interior lights Push the button on the keyfob once to turn on the interior lights and puddle lamps (if so equipped). For additional information, refer to (cid:147)Interior light(cid:148) in the (cid:147)Instruments and controls(cid:148) section earlier in this manual.


3-10 Pre-driving checks and adjustments


INTELLIGENT KEY SYSTEM (if so equipped)


WARNING


Radio waves could adversely affect elec- tric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before use.


The Intelligent Key system can operate all the door locks using the remote controller function or pushing the request switch on the vehicle without taking the key out from a pocket or purse. The operating environment and/or conditions may af- fect the Intelligent Key system operation.


Be sure to read the following before using the Intelligent Key system.


CAUTION


c Be sure to carry the Intelligent Key with


you when operating the vehicle.


c Never leave the Intelligent Key in the


vehicle when you leave the vehicle.


The Intelligent Key is always communicating with the vehicle as it receives radio waves. The Intel- ligent Key system transmits weak radio waves. Environmental conditions may interfere with the operation of the Intelligent Key system under the following operating conditions.


c When operating near a location where strong radio waves are transmitted, such as a TV tower, power station and broadcasting station.


c When in possession of wireless equipment, such as a cellular telephone, transceiver, and CB radio.


c When the Intelligent Key is in contact with or


covered by metallic materials.


c When any type of radio wave remote control


is used nearby.


c When the Intelligent Key is placed near an electric appliance such as a personal com- puter.


c When the vehicle is parked near a parking


meter.


In such cases, correct the operating conditions before using the Intelligent Key function or use the mechanical key. Although the life of the battery varies depending on the operating conditions, the battery(cid:146)s life is approximately 2 years. the battery is dis- charged, replace it with a new one. When the Intelligent Key battery is low, the Intel- ligent Key system warning light ( ) will blink green for about 30 seconds after the ignition switch is turned to the ON position.


If


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


Since the Intelligent Key is continuously receiving radio waves, if the key is left near equipment which transmits strong radio waves, such as sig- nals from a TV and personal computer, the bat- tery life may become shorter.


For information regarding replacement of a bat- tery, see (cid:147)Battery(cid:148) in the (cid:147)Maintenance and do-it- yourself(cid:148) section. Because the steering wheel is locked electrically, unlocking the steering wheel with the ignition switch in the LOCK position is impossible when the vehicle battery is completely discharged. Un- locking the steering wheel is impossible even if the Intelligent Key is inserted into the ignition switch. Pay special attention that the vehicle bat- tery is not completely discharged. As many as 4 Intelligent Keys can be registered and used with one vehicle. For information about the purchase and use of additional Intelligent Keys, contact a NISSAN dealer.


CAUTION


c Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function.


c Do not drop the Intelligent Key.


c Do not strike the Intelligent Key sharply


against another object.


c Do not change or modify the Intelligent


Key.


c Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, im- mediately wipe until it is completely dry. c Do not place the Intelligent Key for an extended period in an area where tem- peratures exceed 140(cid:176)F (60(cid:176)C).


c Do not attach the Intelligent Key with a


key holder that contains a magnet.


c Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV, audio equipment and personal computers.


If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of that Intelli- gent Key from the vehicle. This may prevent the unauthorized use of the Intelligent Key to operate the vehicle. For information regarding the erasing procedure, contact a NISSAN dealer.


Pre-driving checks and adjustments 3-11


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


OPERATING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch s1 . When the Intelligent Key battery is discharged or strong radio waves are present near the operat- ing location, the Intelligent Key system(cid:146)s operat- ing range becomes narrower, and the Intelligent Key may not function properly.


The operating range is within 31.50 in (80 cm) from each request switch s1 .


3-12 Pre-driving checks and adjustments


SPA2038
If the Intelligent Key is too close to the door glass, handle or rear bumper, the request switches may not function. When the Intelligent Key is within the operating range, it is possible for anyone, even someone who does not carry the Intelligent Key, to push the request switch to lock/unlock the doors.


WPD0375


DOOR LOCKS/UNLOCKS PRECAUTION c Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have difficulty recognizing that the Intelli- gent Key is outside the vehicle.


c After locking with the door handle request switch, verify the doors are securely locked by testing them.


c To prevent the Intelligent Key from being left inside the vehicle, make sure you carry the key with you and then lock the doors.


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


c Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door.


WPD0411


WPD0412


INTELLIGENT KEY OPERATION You can lock or unlock the doors without taking the key out of your pocket or bag. When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch within the range of opera- tion.


Locking doors 1. Move the selector to the P (Park) position, push the ignition switch to the LOCK posi- tion and make sure you carry the Intelligent Key with you.


2. Close all doors.


3. Push any door handle request switch while


carrying the Intelligent Key with you.


4. All doors and the rear liftgate will lock.


5. The hazard warning lights flash twice and


the outside buzzer sounds twice.


Pre-driving checks and adjustments 3-13


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


CAUTION


CAUTION


The lockout protection may not function under the following conditions: c When the Intelligent Key is placed on


top of the instrument panel.


c When the Intelligent Key is placed in-


side the glove box or a storage bin.


c When the Intelligent Key is placed in-


side the door pockets.


c When the Intelligent Key is placed in-


side or near metallic materials.


The lockout protection may function when the Intelligent Key is outside the vehicle but it is too close to the vehicle.


c After locking the doors using the re- quest switch, make sure that the doors have been securely locked by operating the door handles or the rear liftgate opener switch.


c When locking the doors using the re- quest switch, make sure to have the Intelligent Key in your possession be- fore operating the request switch to prevent the Intelligent Key from being left in the vehicle.


c The request switch is operational only when the Intelligent Key has been de- tected by the Intelligent Key system.


Lockout protection


To prevent the Intelligent Key from being acci- dentally locked in the vehicle, lockout protection is equipped with the Intelligent Key system.


When the driver(cid:146)s side door is open, the doors are locked, and then the Intelligent Key is put inside the vehicle and all the doors are closed; the lock will automatically unlock and the door buzzer sounds.


WPD0413


NOTE: c Doors lock with the door handle request switch while the ignition switch is not in the LOCK position.


c Doors do not lock by pushing the door handle request switch while any door is open. However, doors lock with the me- chanical key even if any door is open.


c Doors do not lock with the door handle request switch with the Intelligent Key inside the vehicle and a beep sounds to warn you. However, when an Intelligent Key is inside the vehicle, doors can be locked with an- other Intelligent Key.


3-14 Pre-driving checks and adjustments


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


The interior light timer illuminates for 30 seconds when a door is unlocked and the room light switch is in the DOOR position. The interior light can be turned off without waiting for 30 seconds by performing one of the follow- ing operations. c Placing the ignition switch in the ON posi-


tion.


c Locking the doors with the remote controller. c Switching the room light switch to the OFF


position.


WPD0412


WPD0413


Unlocking doors 1. Carry the Intelligent Key.


2. Push the door handle request switch.


3. The hazard warning lights flash once and the


outside buzzer sounds once.


4. Push the door handle request switch again


within 30 seconds to unlock all doors.


For power liftgate opening:


1. Carry the intelligent key.


2. Pull the power liftgate handle or push the


power liftgate button.


3. Power back door open.


If a door handle is pulled while unlocking the doors, that door may not be unlocked. Returning the door handle to its original position will unlock the door. If the door does not unlock after return- ing the door handle, push the door handle re- quest switch to unlock the door.


All doors will be locked automatically unless one of the following operations is performed within 1
minute after pushing the request switch. c Opening any door. c Pushing the ignition switch.


Pre-driving checks and adjustments 3-15


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


CAUTION


After locking the doors using the Intelli- gent Key, be sure that the doors have been securely locked by operating the door handles.


HOW TO USE THE REMOTE KEYLESS ENTRY FUNCTION The remote keyless entry function can operate all door locks using the remote keyless function of the Intelligent Key. The remote keyless function can operate at a distance of 33 ft (10 m) away from the vehicle. The operating distance de- pends upon the conditions around the vehicle. The remote keyless entry function will not func- tion under the following conditions: c When the Intelligent Key is not within the


operational range.


c When the doors or the rear liftgate are open


or not closed securely.


c When the Intelligent Key battery is dis-


charged.


CAUTION


When locking the doors using the Intelli- gent Key, be sure not to leave the key in the vehicle.


3-16 Pre-driving checks and adjustments


Locking doors 1. Place the ignition switch in the LOCK posi-


WPD0359


tion.


2. Close all doors.


3. Push the


Key.


button on the Intelligent


4. The hazard warning lights flash twice and


the horn beeps once.


5. All doors will be locked.


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


The interior light illuminates for 30 seconds when a door is unlocked and the room light switch is in the DOOR position. The light can be turned off without waiting for 30
seconds by performing one of the following op- erations. c Placing the ignition switch in the ON posi-


tion.


c Locking the doors with the remote controller. c Switching the room light switch to the OFF


position.


Opening windows (if so equipped) The Intelligent Key allows you to open windows equipped with automatic operation simulta- neously. c To open the windows, press the


but- ton on the keyfob for longer than 3 sec- onds after all doors are unlocked.


button on the keyfob.


The door windows will open while pressing the The door windows cannot be closed by using the keyfob.


WPD0360


Unlocking doors 1. Push the


button on the Intelligent Key.


2. The hazard warning lights flash once.


3. Push the


button again within 5 sec-


onds to unlock all doors.


All doors will be locked automatically unless one of the following operations is performed within 1
minute after pushing the c Opening any doors. c Pushing the ignition switch.


button.


WPD0414


Releasing the rear lift gate Push the button for longer than 0.5 sec- ond to open the rear lift gate. The rear lift gate release button will not operate when the ignition switch is in the ON position.


Pre-driving checks and adjustments 3-17


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


The hazard warning lights will flash once and the horn will sound once to confirm that the horn beep feature has been reactivated.


Deactivating the horn beep feature does not si- lence the horn if the alarm is triggered. WARNING SIGNALS To help prevent the vehicle from moving unex- pectedly by erroneous operation of the Intelligent Key or to help prevent the vehicle from being stolen, a chime or buzzer sounds from inside and outside the vehicle and a warning is displayed in the instrument panel.


When a chime or beep sounds or a warning is displayed, be sure to check the vehicle and the Intelligent Key.


See the troubleshooting guide that follows and (cid:147)Vehicle information display indicator lights and warnings(cid:148) in the (cid:147)Instruments and controls(cid:148) sec- tion. TROUBLESHOOTING GUIDE Verify the location of all Intelligent Keys that are programmed for the vehicle. If another Intelligent Key is in range or inside the vehicle, the vehicle system may respond differently than expected.


WPD0415


WPD0362


Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention button on the by pushing and holding the Intelligent Key for longer than 0.5 second. The panic alarm and headlights will stay on for 25
seconds.


The panic alarm stops when: c it has run for 25 seconds, or c any button is pushed on the Intelligent Key.


Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the Intelligent Key. To deactivate: Press and hold the and


buttons for at least 2 seconds.


The hazard warning lights will flash three times to confirm that the horn beep feature has been deactivated. To activate: Press and hold the and once more.


buttons for at least 2 seconds


3-18 Pre-driving checks and adjustments


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


Symptom


Possible Cause


Remedy


When pushing the ignition switch to stop the engine


When opening the driver(cid:146)s door to get out of the vehicle


When closing the door after getting out of the vehicle


When closing the door with the inside lock knob turned to LOCK


The SHIFT P warning appears on the dis- play and the inside warning chime sounds continuously. The inside warning chime sounds continuously. The NO KEY warning appears on the display, the outside chime sounds 3 times and the inside warning chime sounds for approximately 3 seconds. The NO KEY warning appears on the dis- play and the outside chime sounds continuously. The outside chime sounds for approximately 3 seconds and all the doors unlock.


When pushing the door handle request switch to lock the door


The outside chime sounds for approximately 2 seconds.


The selector lever is not in the P (Park) position.


Shift the selector lever to the P (Park) position.


The ignition switch is in the ACC position.


The ignition switch is in the ACC or ON position.


Push the ignition switch to the OFF position. Push the ignition switch to the OFF position.


The ignition switch is in the ACC position and the selector lever is not in the P (Park) position.


The Intelligent Key is inside the vehicle.


Move the selector lever to the P (Park) po- sition and push the ignition switch to the OFF position. Carry the Intelligent Key with you.


The Intelligent Key is inside the vehicle. A door is not closed securely. The door handle request switch is pushed before the door is closed.


Carry the Intelligent Key with you. Close the door securely. Push the door handle request switch after the door is closed.


Pre-driving checks and adjustments 3-19


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


HOOD


LIFT GATE


WARNING


c Always be sure the lift gate has been closed securely to prevent it from open- ing while driving.


c Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle. See (cid:147)Ex- haust gas(cid:148) in the (cid:147)Starting and driving(cid:148) section of this manual.


c Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls. Unattended children could become involved in seri- ous accidents.


c Always be sure that hands and feet are clear of the door frame to avoid injury while closing the lift gate.


s1 Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly.


s2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood.


When closing the hood, lower it slowly and make sure it locks into place.


LPD0244


WARNING


c Make sure the hood is completely closed and latched before driving. Fail- ure to do so could cause the hood to fly open and result in an accident.


c If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.


3-20 Pre-driving checks and adjustments


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


LPD0245


LPD0247


LPD0283


OPERATING THE MANUAL LIFT GATE The power door lock system allows you to lock or unlock all doors including the lift gate simulta- neously. To open the lift gate, pull up on the handle. To close, lower and push the lift gate down se- curely.


Rear pillar switch


OPERATING THE POWER LIFT GATE (if so equipped)


NOTE: To open, close or reverse the power lift gate, the shift selector lever must be in P (Park). Also, the power lift gate will not operate if battery voltage is low. Addition- ally, the glass hatch must be fully closed in order to open, close or reverse the power liftgate.


Instrument panel switch


Power Open: The power lift gate automatically moves from the fully closed position to the fully open position in approximately 5 (cid:150) 8 seconds. The power open feature can be activated by the switch on the keyfob, the instrument panel switch and by the outside opener handle. The hazard lights flash and a chime sounds to indicate the power open sequence has been started. c The lift gate can be opened by the instrument panel switch and the keyfob even if the vehicle is locked. The lift gate will individually unlock and open. Once the lift gate is closed, its lock will align to the vehicle(cid:146)s lock or unlock status. Pre-driving checks and adjustments 3-21


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


c The switch on the rear pillar can only be used to close the lift gate if the cancel switch is not in the on position.


Reverse: The power lift gate will reverse direction immedi- ately during power open or power close if the keyfob, instrument panel or rear pillar switch is pressed or if the outside handle is lifted. A chime will sound to announce the reversal. Auto Reverse: If an obstacle is detected during power open or power close, a warning chime will sound and the lift gate will reverse direction and return to the full open or full close position. If a second obstacle is detected, the lift gate motion will stop and the drive motor will disengage. The lift gate will enter manual mode.


A pinch strip is mounted on each side of the lift gate. If an obstacle is detected by a pinch strip during power close, the lift gate will reverse di- rection and return to the full open position.


NOTE: If the pinch strip is damaged or removed, the power close function will not operate.


WARNING


There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the lift gate.


Manual Mode: If power operation is not available, the lift gate may be operated manually. Power operation may not be available if the cancel switch is in the on position, if multiple obstacles have been de- tected in a single power cycle, or if battery volt- age is low.


c The keyfob button must be held for 0.5 sec-


ond before the lift gate opens.


c The lift gate must be unlocked to open it with


the outside opener handle.


c The switch on the rear pillar cannot be used


to open the lift gate.


A warning chime will sound if the shift selector lever is moved out of P (Park) during a power open operation. Power Close: The power lift gate automatically moves from the fully open position to the secondary position. When the lift gate reaches the secondary posi- tion, the cinching motor engages and pulls the lift gate to its primary latch position. Power close takes approximately 7 (cid:150) 10 seconds. The power close feature can be activated by the switch on the keyfob, the instrument panel and the rear pillar. The hazard lights flash and a chime sounds to indicate the power close sequence has been started. c If the outside opener handle is activated while the cinching motor is engaged, the cinching motor will disengage and release the latch.


c The keyfob button must be held for 0.5 sec-


ond before the lift gate closes.


3-22 Pre-driving checks and adjustments


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


CAUTION


c If the power lift gate does not stay open or if the lift gate unexpectedly closes at any time while a continuous warning chime sounds, do not operate the lift gate. There may be a pressure loss in one or both of the lift gate gas stays. Have the lift gate inspected by a NISSAN dealer.


c Do not activate the power lift gate if one or both of the lift gate gas stays are removed. Damage to the lift gate or power lift gate mechanisms may occur.


LPD0250


Safe Mode: If the lift gate gas stays s1 lose pressure, the power lift gate safe mode is activated. When the safe mode is activated, the lift gate slowly closes. A continuous warning chime sounds until the lift gate is in the fully down position. Then the lift gate will be pulled to the closed and latched position by a motor. The power lift gate cannot be opened using the switches at any time in the safe mode. The auto reverse function remains active while the lift gate is closing in the safe mode. Do not operate the lift gate again until checked by your NISSAN dealer.


it is


LPD0248


CANCEL SWITCH Press the switch toward the CANCEL position to disable the rear pillar switch. The lift gate can still be opened and closed using the switch on the instrument panel and keyfob. The lift gate can also be opened manually with the outside handle if the lift gate is unlocked. LIFT GATE RELEASE


WARNING


c Always be sure the lift gate has been closed securely to prevent it from open- ing while driving.


Pre-driving checks and adjustments 3-23


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


c Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle. See (cid:147)Ex- haust gas(cid:148) in the (cid:147)Starting and driving(cid:148) section of this manual.


CAUTION


c If the power lift gate does not stay open or if the lift gate unexpectedly closes at any time while a continuous warning chime sounds, do not operate the lift gate. There may be a pressure loss in one or both of the lift gate gas stays. Have the lift gate inspected by a NISSAN dealer.


c Do not activate the power lift gate if one or both of the lift gate gas stays are removed. Damage to the lift gate or power lift gate mechanisms may occur.


3-24 Pre-driving checks and adjustments


LPD0251


LPD0252


Manual lift gate release Manual lift gate (if so equipped) If the lift gate cannot be locked or unlocked with the door lock switch or the keyfob due to a discharged battery, follow these steps: 1. Remove the cover on the inside of the lift


gate.


Power lift gate release Power lift gate (if so equipped) If the lift gate cannot be opened with the door lock switch or keyfob due to a discharged battery, follow these steps: 1. Remove the cover on the inside of the lift


gate.


2. Move the lever up to lock or down to unlock.


2. Move the lever up to open the lift gate.


Z REVIEW COPY—2008 Armada (wzw) Owners Manual—USA_English (nna) 03/05/07—arosenma X


GLASS HATCH


FUEL-FILLER DOOR


NOTE: The lift gate must be unlocked in order to open the glass hatch.


WARNING


Do not drive with the glass hatch open. This could allow dangerous exhaust gases to be drawn into the vehicle. See (cid:147)Exhaust gas(cid:148) in the (cid:147)Starting and driving(cid:148) section of this manual.


LPD0246
To open, pull up on the smaller outside handle to release the glass hatch, then pull up on the glass hatch. To close, lower and push the glass hatch down securely.


LPD0391


FUEL-FILLER CAP The fuel-filler cap is a ratcheting type. Turn the cap counterclockwise to remove. To tighten, turn the cap clockwise until ratcheting clicks are heard.

Loading...
x