The passenger’s advanced airbag
system has weight sensors under the
seat. Although Honda does not
encourage carrying a child in the
passenger’s seat, if the sensors
detect the weight of an infant or
small child (up to about 65 lbs or 29
kg), the system will automatically
turn the passenger’s airbag off.
Be aware that objects placed on the passenger’s seat can also cause the airbag to be turned off.
2008 S2000 07/07/25 17:30:51 31S2A680 0030
Additional Information About Your Airbags
When the airbag is turned off, a ‘‘passenger airbag off’’ indicator in the center of the dashboard comes on (see page
26
).
If the weight sensors detect there is no passenger in the seat, the airbag will be off. However, the passenger airbag off indicator will not come on.
To ensure that the passenger’s advanced airbag system will work properly, donotdoanythingthat wouldincreaseordecreasethe weightonthepassenger’sseat,such ashangingheavyobjectsontheseat.
How the SRS Indicator Works
The SRS indicator alerts you to a potential problem with your airbags or seat belt tensioners.
When you turn the ignition switch to the ON (II) position, this indicator comes on briefly then goes off. This tells you the system is working properly.
If the indicator comes on at any other time, or does not come on at all, you should have the system checked by your dealer. For example:
If the SRS indicator does not come on after you turn the ignition switch to the ON (II) position. If the indicator stays on after the engine starts. If the indicator comes on or flashes on and off while you drive.
CONTINUED
25
2008 S2000 Be aware that objects placed on the passenger’s seat can cause the indicator to come on.
If no weight is detected in the passenger’s seat, the airbag will be automatically shut off. However, the indicator will not come on.
07/07/25 17:30:59 31S2A680 0031
Additional Information About Your Airbags
If you see any of these indications, the airbags and seat belt tensioners may not work properly when you need them.
How the Passenger Airbag Off Indicator Works
Ignoring the SRS indicator can result in serious injury or death if the airbag systems or tensioners do not work properly.
Have your vehicle checked by a dealer as soon as possible if the SRS indicator alerts you to a possible problem.
U. S.
Canada
PASSENGER AIRBAG OFF INDICATOR
This indicator alerts you that the passenger’s airbag has been shut off because weight sensors detect about 65 lbs (29 kg) or less (the weight of an infant or small child) on the passenger’s seat. It does notmean there is a problem with the airbag.
26
2008 S2000 07/07/25 17:31:08 31S2A680 0032
The passenger airbag off indicator may come on and off repeatedly if the total weight on the seat is near the airbag cutoff threshold.
If an adult or teenage passenger is riding in front, move the seat as far to the rear as possible, and have the passenger sit upright and wear the seat belt properly.
Additional Information About Your Airbags
If the indicator comes on with no passenger and no objects on the passenger seat, or with an adult riding there, something may be interfering with the weight sensors. Look for and remove:
Airbag Service Your airbag systems are virtually maintenance free, and there are no parts you can safely service. However, you must have your vehicle serviced if:
Any items under the passenger’s seat.
Any objects hanging on the seat.
Any object(s) touching the rear of the seat-back.
If no obstructions are found, have your vehicle checked by a dealer as soon as possible.
Any airbag
Anairbageverinflates. that has deployed must be replaced along with the control unit and other related parts. Any seat belt tensioner that activates must also be replaced.
Do not try to remove or replace any airbag by yourself. This must be done by an authorized dealer or a knowledgeable body shop.
27
2008 S2000 07/07/25 17:31:14 31S2A680 0033
Additional Information About Your Airbags
Additional Safety Precautions
Donotattempttodeactivateyour airbags. seat belts provide the best protection.
Together, airbags and
Donottamperwithairbag componentsorwiringforany Tampering could cause reason. the airbags to deploy, possibly causing very serious injury.
Donotremoveormodifyaseat withoutconsultingyourdealer. This could make the driver’s seat position sensor or the passenger’s weight sensors ineffective. If it is necessary to remove or modify a seat to accommodate a person with disabilities, first contact Honda Automobile Customer Service at (800) 999-1009.
TheSRSindicatoralertsyoutoa Take your vehicle to an problem. authorized dealer as soon as possible. If you ignore this indication, your airbags may not operate properly.
Even if your
Ifyourvehiclehasamoderateto severeimpact. airbags do not inflate, your dealer should inspect the driver’s seat position sensor, the passenger’s weight sensors, the seat belt tensioners, and all seat belts worn during the crash to make sure they are operating properly.
28
2008 S2000 07/07/25 17:31:21 31S2A680 0034
Protecting Children General Guidelines
−
Children depend on adults to protect them. However, despite their best intentions, many adults do not know how to passengers.
protect child
properly
If you ever need to drive with a child in your vehicle, be sure to read this section. It begins with important general guidelines, then presents special information for small children who must ride in a forward- facing child seat, and for larger children.
All Children Must Be Restrained Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained. In fact, vehicle accidents are the number one cause of the death of children ages 12 and under.
To reduce the number of child deaths and injuries, every state and Canadian province requires that children be properly restrained when they ride in a vehicle.
Anychildwhoistoosmalltoweara
seatbeltmustberestrainedinan
approvedchildseatthatisproperly
securedtothevehicle
33
(see pages
36
).
−
Largerchildrenmustberestrained withalap/shoulderbeltandrideon aboosterseatuntiltheseatbeltfits ). themproperly
(see pages
37
40
−
Children who are unrestrained or improperly restrained can be seriously injured or killed in a crash.
Any child too small for a seat belt should be properly restrained in a child seat. A larger child should be properly restrained with a seat belt and use a booster seat if necessary.
29
2008 S2000 07/07/25 17:31:30 31S2A680 0035
Protecting Children General Guidelines
−
Your Vehicle is Not Recommended for Child Passengers According to accident statistics, children of all ages and sizes are safer when they are restrained in a back seat. The National Highway Traffic Safety Administration and Transport Canada recommend that all children aged 12 and under be properly restrained in a back seat. Some states have laws restricting where children may ride.
Since this vehicle does not have a back seat, we strongly recommend that you do not carry any child who is not large enough or mature enough to ride in front (see page
37
).
The Passenger’s Airbag Can Pose Serious Risks Airbags have been designed to help protect adults in a moderate to severe frontal collision. To do this, the passenger’s airbag is quite large, and it can inflate with enough force to cause very serious injuries.
Even though your vehicle has an
advanced airbag system that
automatically turns the passenger’s
airbag off (see page
24
follow these guidelines:
), please
Infants Neverputarear-facingchildseatin If the airbag inflates, it thisvehicle. can hit the back of the child seat with enough force to kill or very seriously injure an infant.
30
If the vehicle seat is too
SmallChildren Placingaforward-facingchildseatin thepassenger’sseatcanbe hazardous. far forward, or the child’s head is thrown forward during a collision, an inflating airbag can strike the child with enough force to kill or very seriously injure a small child.
LargerChildren Childrenwhohaveoutgrownchild seatsarealsoatriskofbeinginjured orkilledbyaninflatingpassenger’s If a larger child must ride in airbag. this vehicle, see page important guidelines on how to decide when a child is ready to ride in the passenger’s seat and how to properly protect the child.
for
37
2008 S2000 07/07/25 17:31:42 31S2A680 0036
To remind you of the passenger’s airbag hazards, your vehicle has warning labels on the dashboard (U.S. models) and on the driver’s and passenger’s visors. Please read and follow the instructions on these labels.
Protecting Children General Guidelines
−
U.S.Models SUN VISOR
DASHBOARD
CanadianModels SUN VISOR
31
2008 S2000 07/07/25 17:31:49 31S2A680 0037
Protecting Children General Guidelines
−
Additional Safety Precautions
Neverholdasmallchildonyour If you are not wearing a seat lap. belt in a crash, you could be thrown forward and crush the child against the dashboard. If you are wearing a seat belt, the child can be torn from your arms and be seriously hurt or killed.
Neverputaseatbeltoveryourself andachild. belt could press deep into the child and cause serious or fatal injuries.
During a crash, the
Neverlettwochildrenusethe If they do, they sameseatbelt. could be very seriously injured in a crash.
32
Donotleavechildrenaloneina Leaving children without vehicle. adult supervision is illegal in most states and Canadian provinces, and can be very hazardous.
For example, a small child left in a vehicle on a hot day can die from heatstroke. A child left alone with the key in the ignition switch can accidentally set the vehicle in motion, possibly injuring themselves or others.
Even very young
Keepvehiclekeysandremote transmittersoutofthereachof children. children learn how to unlock vehicle doors, turn on the ignition switch, and open the trunk, which can lead to accidental injury or death.
Lockbothdoorsandthetrunk whenyourvehicleisnotinuse. Children who play in vehicles can accidentally get trapped inside. Teach your children not to play in or around vehicles. Know how to operate the emergency trunk opener and decide if your children should be shown how to use this feature (see page
66
).
2008 S2000 07/07/25 17:31:57 31S2A680 0038
Because an inflating airbag can seriously injure or kill small children, we recommend that you do not carry a small child as a passenger in this vehicle.
If you decide to transport a small child in this vehicle, be sure to move the passenger seat as far to the rear as possible, and follow the instructions and guidelines in the following pages.
ChildSeatType A child who is at least one year old, and who fits within the child seat maker’s weight and height limits, should be restrained in a forward- facing, upright child seat.
Of the different seats available, we recommend those that have a five- point harness system as shown.
Protecting Small Children
ChildSeatPlacement We also recommend that a small child use the child seat until the child reaches the weight or height limit for the seat.
Placing a forward-facing child seat in the passenger’s seat can result in serious injury or death if the airbag inflates.
If you must place a forward- facing child seat in the passenger’s seat, move the vehicle seat as far back as possible and properly restrain the child.
33
2008 S2000 07/07/25 17:32:07 31S2A680 0039
Selecting a Child Seat, Installing a Child Seat
Selecting a Child Seat To provide proper protection, a child seat should meet three requirements:
Installing a Child Seat After selecting a proper child seat, there are three main steps in installing a child seat:
1.
ThechildseatshouldmeetU.S.or CanadianMotorVehicleSafety Look for FMVSS Standard213. 213 or CMVSS 213 on the box.
2.
Thechildseatshouldbeofthe propertypeandsizetofitthechild.
1.
Properlysecurethechildseatto All child seats must be thevehicle. secured to the vehicle with the lap part of a lap/shoulder belt. A child whose seat is not properly secured to the vehicle can be endangered in a crash.
3.
Thechildseatshouldfitthe passenger’sseat.
Before purchasing a child seat, or using a previously purchased one, we recommend that you test the seat to make sure it fits properly in the passenger’s seat.
34
2.
After installing a child
Makesurethechildseatisfirmly secured. seat, push and pull the seat forward and from side-to-side to verify that it is secure.
A child seat secured with a seat belt should be installed as firmly as possible. However, it does not need to be ‘‘rock solid.’’ Some side- to-side movement can be expected and should not reduce the child seat’s effectiveness.
If the child seat is not secure, use a different style of child seat that can be firmly secured.
3.
Securethechildinthechildseat. Make sure the child is properly strapped in the child seat according to the child seat maker’s instructions. A child who is not properly secured in a child seat can be seriously injured in a crash.
The following pages provide guidelines on how to properly install a forward-facing child seat.
2008 S2000 07/07/25 17:32:14 31S2A680 0040
Installing a Child Seat
In this vehicle, a forward-facing child seat must be secured to the vehicle with the lap part of the lap/shoulder belt. In addition, the lockable retractor must be activated to secure a child seat.
1.
Move the vehicle seat to the rear- most position. Moving the seat as far back as possible reduces the chance of a child being injured or killed if the passenger’s airbag inflates.
2.
3.
With the child seat in position, route the belt through the child seat according to the seat maker’s instructions, then insert the latch plate into the buckle.
4.
After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked and you will need to repeat these steps.
To activate the lockable retractor, slowly pull the shoulder part of the belt all the way out until it stops, then let the belt feed back into the retractor.
CONTINUED
35
2008 S2000 07/07/25 17:32:20 31S2A680 0041
Installing a Child Seat
To deactivate the lockable retractor and remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract.
6.
Push and pull the child seat forward and from side-to-side to verify that it is secure enough to stay upright during normal driving maneuvers. If the child seat is not secure, unlatch the belt, allow it to retract fully, then repeat these steps.
5.
After confirming that the belt is locked, grab the shoulder part of the belt near the buckle, and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure.
To remove slack, it may help to put weight on the child seat, or push on the back of the seat while pulling up on the belt.
36
2008 S2000 07/07/25 17:32:28 31S2A680 0042
When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit on a booster seat and wear a lap/shoulder belt.
Since this vehicle does not have a back seat, we recommend that you do not carry a larger child, age 12 or under, as a passenger.
However, the following pages provide guidelines to help you decide when a given child may ride in this vehicle, and how to properly protect the child.
Allowing a larger child age 12 or under to ride in the vehicle can result in injury or death if the passenger’s airbag inflates.
If a larger child must ride in the vehicle, adjust the vehicle seat as far back as possible, use a booster seat if needed, and have the child sit up properly and wear the seat belt properly.
Protecting Larger Children
Checking Seat Belt Fit
To determine if a lap/shoulder belt properly fits a child, have the child put on the seat belt, then ask yourself:
1.
Does the child sit all the way back against the seat?
2.
Do the child’s knees bend comfortably over the edge of the seat?
CONTINUED
37
2008 S2000 07/07/25 17:32:37 31S2A680 0043
Protecting Larger Children
3.
Does the shoulder belt cross between the child’s neck and arm?
4.
Is the lap part of the belt as low as possible, touching the child’s thighs?
5.
Will the child be able to stay seated like this for the whole trip?
If you answer yes to all these questions, the child is ready to wear the lap/shoulder belt correctly. If you answer no to any question, the child needs to ride on a booster seat.
38
Using a Booster Seat
to drive.
Booster seats can be high-back or low-back. Whichever style you select, make sure the booster meets federal safety standards and that you follow the booster seat maker’s instructions.
If a child who uses a booster seat rides in this vehicle, move the vehicle seat as far to the rear as possible, and be sure the child is wearing the seat belt properly.
A child may continue using a booster seat until the tops of their ears are even with the top of the vehicle’s or booster’s seat-back. A child of this height should be tall enough to use the lap/shoulder belt without a booster seat.
A child who has outgrown a forward- facing child seat should use a booster seat until the lap/shoulder belt fits them properly without the booster.
Some states and Canadian provinces also require children to use a booster seat until they reach a given age or weight (e.g., 6 years or 60 lbs). Be sure to check current laws in the states or provinces where you intend
2008 S2000 07/07/25 17:32:47 31S2A680 0044
When Can a Larger Child Ride in This Vehicle The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a back seat.
PhysicalSize Physically, a child must be large enough for the lap/shoulder belt to properly fit (see page belt does not fit properly, with or without the child sitting on a booster, the child should not sit in this vehicle.
). If the seat
37
If the passenger’s airbag inflates in a moderate to severe frontal collision, the airbag can cause serious injuries to a child who is unrestrained, improperly restrained, sitting too close to the airbag, or out of position.
Maturity To safely ride in this vehicle, a child must be able to follow the rules, including sitting properly, and wearing the seat belt properly throughout ride.
Of course, children vary widely. And while age may be one indicator of when a child can safely ride in this vehicle. There are other important factors you should consider.
Protecting Larger Children
If you decide that a child can safely ride in this vehicle, be sure to:
Carefully read the owner’s manual, and make sure you understand all seat belt instructions and all safety information.
Move the vehicle seat to the rear- most position.
Have the child sit up straight, back against the seat, and feet on or near the floor.
Check that the child’s seat belt is properly and securely positioned.
Supervise the child. Even mature children sometimes need to be reminded to fasten the seat belts or sit properly.
39
2008 S2000 07/07/25 17:32:53 31S2A680 0045
Devices intended to
Donotputanyaccessoriesona seatbelt. improve a child’s comfort or reposition the shoulder part of a seat belt can make the belt less effective and increase the chance of serious injury in a crash.
Protecting Larger Children
Additional Safety Precautions
Donotletachildwearaseatbelt This could result acrosstheneck. in serious neck injuries during a crash.
This could
Donotletachildputtheshoulder partofaseatbeltbehindtheback orunderthearm. cause very serious injuries during a crash. It also increases the chance that the child will slide under the belt in a crash and be injured.
Twochildrenshouldneverusethe sameseatbelt. could be very seriously injured in a crash.
If they do, they
40
2008 S2000 07/07/25 17:33:01 31S2A680 0046
Your vehicle’s exhaust contains carbon monoxide gas. Carbon monoxide should not enter the vehicle in normal driving if you maintain your vehicle properly and follow the information on this page.
Have the exhaust system inspected for leaks whenever:
The vehicle is raised for an oil change.
You notice a change in the sound of the exhaust.
The vehicle was in an accident that may have damaged the underside.
Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and even kill you.
Avoid any enclosed areas or activities that expose you to carbon monoxide.
High levels of carbon monoxide can collect rapidly in enclosed areas, such as a garage. Do not run the engine with the garage door closed. Even with the door open, run the engine only long enough to move the vehicle out of the garage.
Carbon Monoxide Hazard
With the trunk open, airflow can pull exhaust gas into your vehicle’s interior and create a hazardous condition. If you must drive with the trunk open, open all the windows, and set the heating and cooling system as shown below.
If you must sit in your parked vehicle with the engine running, even in an unconfined area, adjust the heating and cooling system as follows:
1. 2. 3. 4.
Select the fresh air mode. Select the mode. Set the fan speed to high. Set the temperature control to a comfortable setting.
41
2008 S2000 07/07/25 17:33:24 31S2A680 0047
Safety Labels
These labels are in the locations shown. They warn you of potential hazards that could cause serious injury. Read these labels carefully.
If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact your dealer for a replacement.
DASHBOARD U.S.modelsonly
RADIATOR
42
SUN VISOR U.S.models
Canadianmodels
BATTERY
U.S.models
HOOD
Canadianmodels
2008 S2000 07/07/25 17:33:28 31S2A680 0048
Instruments and Controls
This section gives information about the controls and displays that contribute to the daily operation of your vehicle. All the essential controls are within easy reach.
Control Locations Instrument Panel Instrument Panel Indicators Gauges
........................... ............................ .......... ............................................. ..................................... .................................... ............................... .................................. .......... ...................
Odometer Trip meter Select Button Fuel Gauge Check Fuel Cap Message Temperature Gauge Outside Temperature
. 44
. 45
. 46
. 53
. 53
. 53
. 53
. 54
. 54
. 55
Indicator
................................... .................. ............................................
Maintenance Minder Clock
. 55
. 56
. 56
Controls Near the Steering
Wheel
...........................................
. 57
Windshield Wipers and
Washers
Turn Signal and Headlights Instrument Panel Brightness Hazard Warning Button Rear Window Defogger Keys and Locks Immobilizer System Ignition Switch Power Door Locks
....................................... ........... ........ ................. ................. ............................... ........................ ................................ ..........................
. 58
. 59
. 60
. 60
. 61
. 62
. 63
. 64
. 65
Trunk
Emergency Trunk Opener
Remote Transmitter Seats Power Windows Convertible Top Removable Hardtop Mirrors Parking Brake Interior Convenience Items
................................................ ........ ....................... ................................................. .............................. .............................. ........................ ............................................. ................................. ........... ......................... ........... ............. ................................. .......... ...................................
Beverage Holder Accessory Power Socket Console Compartments Audio Panel Dashboard Lower Pocket
Interior Light
. 65
. 66
. 67
. 69
. 70
. 72
. 78
. 87
. 88
. 89
. 90
. 90
. 91
. 91
. 92
. 92
43
2008 S2000 07/07/25 17:33:35 31S2A680 0049
Control Locations
HOOD RELEASE HANDLE (P.130)
POWER DOOR LOCK (P.65)
POWER WINDOW SWITCHES (P.70)
MIRROR CONTROLS (P.87)
MANUAL TRANSMISSION (P.147)
ROOF SWITCH * (P.73) U.S. S2000 model is shown.
* If equipped.
44
HEATING/COOLING CONTROLS (P.96, 100)
*
CRUISE CONTROL BUTTONS (P.124)
AUDIO SYSTEM * (P.104)
PARKING BRAKE (P.88)
HAZARD WARNING BUTTON (P.60)
ACCESSORY POWER SOCKET (P.90)
REAR WINDOW DEFOGGER BUTTON (P.61)
2008 S2000 07/07/25 17:33:45 31S2A680 0050
Instrument Panel
(P.48)
TURN SIGNAL AND HAZARD WARNING INDICATORS VSA ACTIVATION INDICATOR (P.50) VEHICLE STABILITY ASSIST (VSA) SYSTEM INDICATOR (P.50) ANTI-LOCK BRAKE SYSTEM (ABS) INDICATOR (P.47) ELECTRIC POWER STEERING (EPS) INDICATOR (P.48)
SEAT BELT REMINDER INDICATOR (P.46)
PARKING BRAKE AND BRAKE SYSTEM INDICATOR (P.46, 220)
*
OUTSIDE TEMPERATURE INDICATOR
(P.55)
MAINTENANCE MINDER INDICATOR (P.50)
INFORMATION DISPLAY
PEAK POWER INDICATOR
HIGH BEAM INDICATOR
(P.53, 161) (P.52) (P.49)
*
TPMS INDICATOR
(P.51)
(P.51)
LOW TIRE PRESSURE INDICATOR LOW FUEL INDICATOR DAYTIME RUNNING LIGHTS INDICATOR (P.48)
(P.49)
DOOR-OPEN INDICATOR
(P.47)
TRUNK-OPEN INDICATOR IMMOBILIZER SYSTEM INDICATOR CRUISE CONTROL INDICATOR (P.47) MALFUNCTION INDICATOR LAMP
(P.47) (P.49)
(P.47, 219)
LOW OIL PRESSURE INDICATOR
(P.46, 218)
SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR
(P.47)
CHARGING SYSTEM INDICATOR
(P.46, 218)
* *
The U.S. instrument panel is shown. Differences for the Canadian models are noted in the text.
1 : 2 : Only on CR models. CR models are not available in Canada.
45
2008 S2000 07/07/25 17:33:55 31S2A680 0051
Instrument Panel Indicators
The instrument panel has many indicators to give you important information about your vehicle.
Seat Belt Reminder Indicator
This indicator comes on when you turn the ignition switch to the ON (II) position. It reminds you and your passenger to fasten your seat belts. A beeper also sounds if you and your passenger have not fastened your seat belts.
If you turn the ignition switch to the ON (II) position before fastening your seat belts, the beeper sounds, and the indicator flashes. If you do not fasten your seat belts before the beeper stops, the indicator stops flashing but remains on.
46
If your passenger does not fasten their seat belt, the indicator comes on about 6 seconds after the ignition switch is turned to the ON (II) position.
If either of you do not fasten your seat belt while driving, the beeper will sound and the indicator will flash again at regular intervals. For more information, see page
16
Low Oil Pressure Indicator
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page
218
Charging System Indicator
If this indicator comes on when the engine is running, the battery is not being charged. For more information, see page
218
U.S.
Canada
Parking Brake and Brake System Indicator
This indicator has two functions:
1.
2.
It comes on when you turn the ignition switch to the ON (II) position. It is a reminder to check the parking brake. A beeper sounds if you drive with the parking brake not fully released. Driving with the parking brake not fully released can damage the brakes and tires.
If it stays on after you have fully released the parking brake while the engine is running, or if it comes on while driving, there could be a problem with the brake system. For more information, see page
220
2008 S2000 07/07/25 17:34:05 31S2A680 0052
Supplemental Restraint System Indicator
This indicator comes on briefly when you turn the ignition switch to the ON (II) position. If it comes on at any other time, it indicates a potential problem with your airbags. This indicator will also alert you to a potential problem with your automatic seat belt tensioners, driver’s seat position sensor, or the passenger’s seat weight sensors. For more information, see page
.25
Anti-lock Brake System (ABS) Indicator
This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position, and when you push the START button. If it comes on at any other time, there is a problem with the ABS. If this happens, have your vehicle checked at a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function. For more information, see page
150
Instrument Panel Indicators
See page
Malfunction Indicator
Lamp
219
Trunk-open Indicator
This indicator comes on if the trunk lid is not closed tightly.
Door-open Indicator
This indicator comes on if either door is not closed tightly.
Cruise Control Indicator
This indicator comes on when you
set the cruise control. See page
124
cruise control.
for information on operating the
47
2008 S2000 07/07/25 17:34:13 31S2A680 0053
Instrument Panel Indicators
Electric Power Steering (EPS) Indicator
This indicator normally comes on when you turn the ignition to the ON (II) position and goes off after the engine starts. If it comes on at any other time, there is a problem in the electric power steering system. If this happens, stop the vehicle in a safe place and turn off the engine. Reset the system by restarting the engine. The indicator will not turn off immediately. If it does not go off after driving a short distance, or comes on again while driving, take the vehicle to your dealer to have it checked. With the indicator on, the EPS may be turned off, making the vehicle harder to steer.
If the power steering system overheats while driving, the assist is reduced and steering may feel slightly harder.
48
Driving with the power steering system continuously overheating can cause system damage.
Turn Signal and Hazard Warning Indicators
The left or right turn signal indicator blinks when you signal a lane change or turn. If the indicator does not blink or blinks rapidly, it usually means one of the turn signal bulbs is burned out (see page ). Replace the bulb as soon as possible, since other drivers cannot see that you are signaling.
181
When you press the hazard warning button, both turn signal indicators blink. All turn signals on the outside of the vehicle should flash.
‘‘Daytime Running Lights’’ Indicator
If this indicator comes on when the ignition switch is turned to the ON (II) position and the parking brake is released, it means there is a problem in the high beam headlight’s circuit. Have your vehicle checked by your dealer.
2008 S2000 07/07/25 17:34:21 31S2A680 0054
High Beam Indicator
This indicator comes on with the high beam headlights. For more information, see page
59
When the daytime running lights (DRL) are on, this indicator comes on with reduced brightness.
Immobilizer System Indicator
This indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. It will then go off if you have inserted a properly-coded ignition key. If it is not a properly-coded key, the indicator will blink, and the engine will not start (see page
63
).
This indicator also blinks several times when you turn the ignition switch from the ON (II) position to the ACCESSORY (I) or LOCK (0) position.
Instrument Panel Indicators
Low Fuel Indicator
This indicator comes on as a reminder that you must refuel soon.
When the indicator comes on, there is about 2.22 US gal (8.4 ) of fuel remaining in the tank before the reading reaches E. There is a small reserve of fuel remaining in the tank when the reading does reach E.
49
2008 S2000 07/07/25 17:34:32 31S2A680 0055
Instrument Panel Indicators
Vehicle Stability Assist (VSA) System Indicator
This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position.
If it comes on and stays on at any
other time, or if it does not come on
when you turn the ignition switch to
the ON (II) position, there is a
problem with the VSA system. Take
your vehicle to a dealer to have it
checked. Without VSA, your vehicle
still has normal driving ability, but
will not have VSA traction and
stability enhancement. See page
for more information on the
152
VSA system.
50
VSA Activation Indicator
This indicator has three functions:
It comes on as a reminder that you have turned off the vehicle stability assist (VSA) system.
It flashes when VSA is active (see page
152
).
Maintenance Minder Indicator
This indicator reminds you that it is time to take your vehicle in for scheduled maintenance. The maintenance main items and sub items will be displayed in the information display. See page more information on the maintenance minder.
161
for
It comes on along with the VSA system indicator if there is a problem with the VSA system.
This indicator goes off when your dealer resets it after completing the required maintenance service.
1.
2.
3.
This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position. For more information, see page
152
2008 S2000 07/07/26 09:33:07 31S2A680 0056
Low Tire Pressure Indicator
This indicator normally comes on for a few seconds when you turn the ignition to the ON (II) position. If it comes on while driving, it indicates that one or more of your vehicle’s tires are extremely low on pressure.
ExceptCRmodels
If this happens, pull to the side of the
road when it is safe, check which tire
has lost the pressure, and determine
the cause. If it is because of a flat tire,
replace the flat tire with the compact
spare (see page
), and have the
flat tire repaired as soon as possible.
If two or more tires are underinflated,
call a professional towing service
(see page
154
for more information.
). Refer to page
201
228
CRmodels
If this happens, pull to the side of the
road when it is safe, check which tire
has lost the pressure, and determine
the cause. If it is because of a flat tire,
repair the flat tire with the tire repair
kit (see page
), and have the flat
tire repaired as soon as possible. If
two or more tires are underinflated,
call a professional towing service
(see page
154
for more information.
). Refer to page
228
206
Instrument Panel Indicators
Tire Pressure Monitoring System (TPMS) Indicator This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position.
If this indicator comes on and stays on at any other time, or if it does not come on when you turn the ignition switch to the ON (II) position, there is a problem with the TPMS. With this indicator on, the low tire pressure indicator will not come on when a tire loses pressure. Take the vehicle to your dealer to have the system checked.
51
2008 S2000 07/07/25 17:34:47 31S2A680 0057
Instrument Panel Indicators
Peak Power Indicator
PEAK POWER INDICATOR
When the tachometer reading reaches the red zone, this indicator goes out and the red zone starts flashing.
See page points.
148
for recommended shift
CRmodels This indicator show the rpm range where peak power occurs.
When it is flashing, engine speed is approaching the maximum power range.
When it stays on, the engine speed is in the maximum power range.
52
2008 S2000 07/07/25 17:34:57 31S2A680 0058
TACHOMETER
OUTSIDE TEMPERATURE INDICATOR
SPEEDOMETER
CLOCK BUTTON
−
BUTTON
TEMPERATURE GAUGE
FUEL GAUGE
TRIP BUTTON
CLOCK
TRIP METER
+
BUTTON
ODOMETER/CHECK FUEL CAP INDICATOR
SELECT BUTTON
Odometer The odometer shows the total distance your vehicle has been driven. It measures miles in U.S. models and kilometers in Canadian models. It is illegal under U.S. federal law and Canadian provincial regulations to disconnect, reset, or alter the odometer with the intent to change the number of miles or kilometers indicated.
Trip Meter The trip meter shows the number of miles or kilometers driven since you last reset it.
There are two trip meters: Trip A and Trip B. Switch between these displays by pressing the TRIP button repeatedly. Each trip meter works independently, so you can keep track of two different distances.
Gauges
To reset a trip meter, display it, and then press and hold the TRIP button until you hear a beep and the number resets to ‘‘0.0’’.
Select Button The select button switches the speedometer reading between miles per hour and kilometers per hour. It also changes the odometer and trip meters to read in miles or kilometers correspondingly. To change the readings, push the SELECT button, and hold it until you hear a beep.
53
2008 S2000 07/07/25 17:35:03 31S2A680 0059
Gauges
Fuel Gauge This shows how much fuel you have. It may show slightly more or less than the actual amount.
Avoid driving with an extremely low f uel level. Running out of f uel could cause the engine to misf ire, damaging the catalytic converter.
Check Fuel Cap Message Your vehicle’s on board diagnostic system will detect a loose or missing fuel fill cap as an evaporative system leak. The first time a leak is detected a ‘‘CHECK FUEL CAP’’ message appears on the information display. Turn the engine off, and confirm the fuel fill cap is installed. If it is, loosen it, then retighten it until it clicks at least once. The message should go off after several days of normal driving once you tighten or replace the fuel fill cap. To scroll to another display, press the trip button. The ‘‘CHECK FUEL CAP’’ message will appear each time you restart the engine until the system turns the message off.
54
If the system still detects a leak in the vehicle’s evaporative emissions system, the malfunction indicator lamp (MIL) comes on. If the fuel fill cap was not already tightened, turn the engine off, and check or retighten the fuel fill cap until it clicks at least once. The MIL should go off after several days of normal driving once the cap is tightened or replaced. If the MIL does not go off, have your vehicle inspected by a dealer. For more information, see page
219
2008 S2000 07/07/25 17:35:12 31S2A680 0060
Temperature Gauge This shows the temperature of the engine’s coolant. During normal operation, the reading should be in the middle of the gauge. In severe driving conditions, such as very hot weather or a long period of uphill driving, the reading may reach near the red mark. If it reaches the red (Hot) mark, pull safely to the side of the road. See page instructions and precautions on checking the engine’s cooling system.
215
for
Outside Temperature Indicator This indicator displays the outside temperature in Fahrenheit (U.S. models) or Centigrade (Canadian models).
The temperature sensor is in the front bumper. Therefore, the temperature reading can be affected by heat reflection from the road surface, engine heat, and the exhaust from surrounding traffic. This can cause an incorrect temperature reading when your speed is under 19 mph (30 km/h).
The sensor delays the indicator update until it reaches the correct outside temperature. This may take several minutes.
If the outside temperature is incorrectly displayed, you can adjust it up to 3°C ± in Canadian models) warmer or cooler.
5°F in U.S. models (
±
Gauges
NOTE: The temperature must be stabilized before doing this procedure.
To adjust the outside temperature
indicator, make sure the outside
temperature indicator is shown in
the display, then press and hold the
TRIP button for 10 seconds (the
TRIP A or B is also reset). The
following sequence will appear for 1
second each: 0, 1, 2, 3, 4, 5,
4,
− − −
− − −
− − 1, 0 (U.S.) or 0, 1, 2, 3, 1, 0 (Canada).
2, 2,
3, 3,
5,
When it reaches the desired value, release the TRIP button. You should see the new outside temperature displayed.
In certain weather conditions, temperature readings near freezing (32°F, 0°C) could mean that ice is forming on the road surface.
55
2008 S2000 07/07/25 17:35:19 31S2A680 0061
Gauges
Maintenance Minder The information display in the instrument panel shows you the engine oil life and maintenance service items when the ignition switch is in the ON (II) position. This information helps to keep you aware of the periodic maintenance your vehicle needs for continued trouble- free driving. Refer to page more information.
161
for
4.