2006 Honda S2000 Owners Manual

you make any modifications or add anyaccessories,besuretoreadthe following information.

Accessories Your dealer has Honda accessories that allow you to personalize your vehicle. These accessories have been designed and approved for your vehicle, and are covered by warranty.

Although non-Honda accessories may fit on your vehicle, they may not meet factory specifications, and could adversely affect your vehicle’s handling and stability.

Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be hurt or killed.

Follow all instructions in this owner’s manual regarding accessories and modifications.

When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your vehicle’s computer controlled systems, such as your airbags and anti-lock brakes.

Accessories and Modifications

Before installing any accessory:

Make sure the accessory does not obscure any lights, or interfere with proper vehicle operation or performance.

Be sure electronic accessories do not overload electrical circuits (see page proper operation.

) or interfere with

186

Before installing any electronic accessory, have the installer contact your dealer. If possible, have your dealer inspect the final installation.

113

Main MenuTable of Contentsst０５／０８／２９　１８：０６：２４　３１Ｓ２Ａ６６０　０１１７　

Accessories and Modifications

Larger or smaller wheels and tires can interfere with the operation of your vehicle’s anti-lock brakes and other systems.

Modifying your steering wheel or any other part of your vehicle’s safety systems could make the systems ineffective.

If you plan to modify your vehicle, consult your dealer.

Modifying Your Vehicle Removing parts from your vehicle, or replacing components with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability.

Some examples are:

Lowering the vehicle with a non- Honda suspension kit that significantly reduces ground clearance can allow the undercarriage to hit speed bumps or other raised objects, which could cause the airbags to deploy.

Raising your vehicle with a non-Honda suspension kit can affect the handling and stability.

Non-Honda wheels can cause excessive stress on suspension components.

114

Main MenuTable of Contentsst０５／０８／２９　１８：０６：３２　３１Ｓ２Ａ６６０　０１１８　

UPPER AND LOWER CONSOLE COMPARTMENTS

DOOR POCKETS

TRUNK

SEAT-BACK POCKET

CONSOLE SIDE NET

DASHBOARD LOWER POCKET

Carrying Cargo

Your vehicle has several convenient storage areas:

Upper and lower console compartments

Dashboard lower pocket

Door pockets

Console side net

Seat-back pocket

Trunk

However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, which may make it unsafe. Before carrying any type of cargo, be sure to read the following pages.

115

Main MenuTable of Contentsst０５／０８／２９　１８：０６：４０　３１Ｓ２Ａ６６０　０１１９　

Carrying Cargo

Load Limits The maximum load for your vehicle is 400 lbs (185 kg). This figure includes the total weight of all occupants, cargo, and accessories.

Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.

Follow all load limits and other loading guidelines in this manual.

116

Steps for determining correct load limit:

4.

1.

2.

3.

Locate the statement, ‘‘the combined weight of occupants and cargo should never exceed 400
lbs’’ on your vehicle’s placard. (The placard is on the driver’s doorjamb.)

Determine the combined weight of the driver and passenger that will be riding in your vehicle.

Subtract the combined weight of the driver and passenger from 400
pounds or 185 kilograms.

The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the maximum load is 400 lbs and there will be two 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 100 lbs. [400
150) = 100 lbs.]

300 (2

−

×

5.

Determine the combined weight of luggage and cargo being loaded in the vehicle. That weight may not safely exceed the available cargo and luggage load capacity in step 4.

In addition, the total weight of the vehicle, all passengers, accessories, and cargo must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver’s doorjamb.

Main MenuTable of Contentsst０５／０８／２９　１８：０６：４５　３１Ｓ２Ａ６６０　０１２０　

Carrying Items in the Passenger Compartment

Store or secure all items that could be thrown around and hurt someone during a crash.

Carrying Cargo in the Trunk

Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible.

Be sure items placed on the floor behind the seats cannot roll under the seats and interfere with the driver’s ability to operate the pedals or the proper operation of the seats.

Carrying Cargo

117

Main MenuTable of Contentsst０５／０８／２９　１８：０６：５１　３１Ｓ２Ａ６６０　０１２２　

Driving

This section gives you tips on starting the engine under various conditions, and how to operate the manual transmission. It also includes important information on parking your vehicle, and the braking system.

Driving Guidelines Preparing to Drive Starting the Engine Manual Transmission Parking Braking System Anti-lock Brakes (ABS) Vehicle Stability Assist (VSA)

........................ ........................ ....................... ................... ........................................... ............................. ...............

. 120
. 121
. 122
. 123
. 125
. 125
. 126

System

Towing a Trailer

........................................ ...........................

. 128
. 129

119

Main MenustBecause of the low-profile tires fitted to your vehicle, the alloy wheels are closer to the ground. Driving over a pothole or road debris at too high a speed can seriously damage a wheel. Slow down under these conditions.

０５／０８／２９　１８：０６：５６　３１Ｓ２Ａ６６０　０１２３　

Driving Guidelines

Your vehicle is designed to give you optimum handling and performance on well-maintained roads. As part of this design, your vehicle has a minimum of ground clearance and very low-profile tires.

Use caution if you ever drive your vehicle on very rough or rutted roads. You could damage the suspension and underbody by bottoming out. Going too fast over parking lot ‘‘speed bumps’’ can also cause damage.

120

Curbs and steep inclines could damage the front and rear bumpers. Low curbs that do not affect the average vehicle may be high enough to hit the bumper on your vehicle. The front or rear bumper may scrape when trying to drive onto an incline, such as a steep driveway or trailer ramps.

Main MenuTable of Contentsst０５／０８／２９　１８：０７：０６　３１Ｓ２Ａ６６０　０１２４　

Preparing to Drive

Check that any items you may be carrying are stored properly or fastened down securely.

9.

Fasten your seat belt. Check that your passenger has fastened his or her seat belt (see page

12

).

Youshoulddothefollowingchecks and adjustments before you drive your vehicle.

1.

Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.

2.

Check that the hood is fully closed.

5.

6.

7.

Check the seat adjustment (see page

67

).

Check the adjustment of the inside and outside mirrors (see page

75

).

3.

Check that the trunk is fully closed.

8.

Make sure the doors are securely closed and locked.

4.

Visually check the tires. If a tire looks low, use a gauge to check its pressure.

10.

When you start the engine, check the gauges and indicators in the ). instrument panel (see page

45

121

Main MenuTable of Contentsst０５／０８／２９　１８：０７：１５　３１Ｓ２Ａ６６０　０１２５　

Starting theEngine

1.

Apply the parking brake.

2.

3.

In cold weather, turn off all electrical accessories to reduce the drain on the battery.

Push the clutch pedal down all the way. The ENGINE START button has no effect unless the clutch pedal is pressed.

4.

Turn the ignition key to the ON (II) position.

5.

Without touching the accelerator pedal, push the ENGINE START button. Do not hold the ENGINE START button for more than 15
seconds at a time. If the engine does not start right away, pause for at least 10 seconds before trying again.

122

6.

7.

If the engine does not start within 15 seconds, or starts but stalls right away, repeat step 5 with the accelerator pedal pressed halfway down. If the engine starts, release pressure on the accelerator pedal so the engine does not race.

If the engine fails to start, press the accelerator pedal all the way downandholdittherewhile starting to clear flooding. If the engine still does not start, return to step 6.

The engine is harder to start in cold weather. Also, the thinner air found at altitudes above 8,000 feet (2,400
meters) adds to this problem.

ENGINE START BUTTON

The immobilizer system protects your vehicle from theft. If an improperly- coded key (or other device) is used, the engine’s fuel system is disabled. For more information, see page

.61

Main MenuTable of Contentsst０５／０８／２９　１８：０７：２１　３１Ｓ２Ａ６６０　０１２６　

Come to a full stop before you shift into reverse. You can damage the transmission by trying to shift into reverse with the vehicle moving. Push down the clutch pedal, and pause for a few seconds before shifting into reverse, or shift into one of the forward gears for a moment. This stops the gears so they won’t ‘‘grind.’’

When slowing down, you can get extra braking from the engine by shifting to a lower gear. This extra braking can help you maintain a safe speed and prevent your brakes from overheating while going down a steep hill. Before downshifting, make sure the engine speed will not go into the tachometer’s red zone in the lower gear.

Manual Transmission

Rapid slowing or speeding-up can cause loss of control on slippery surfaces. If you crash, you can be injured.

Use extra care when driving on slippery surfaces.

Your vehicle is equipped with an aluminum shift lever. If you leave the vehicle parked outside for a long time on a hot day, be careful before moving the shift lever. Because of the heat, the shift lever may be extremely hot. If the outside temperature is low, the shift lever feels cold.

123

The manual transmission is synchronized in all forward gears for smooth operation. It has a lockout so you cannot shift directly from fifth to reverse instead of sixth (see page ). When shifting up or down, 116
make sure you push the clutch pedal down all the way, shift to the next gear, and let the pedal up gradually. When you are not shifting, do not rest your foot on the clutch pedal. This can cause your clutch to wear out faster.

Main MenuTable of Contentsst０５／０８／２９　１８：０７：２９　３１Ｓ２Ａ６６０　０１２７　

Manual Transmission

Recommended Shift Points Drive in the highest gear that lets the engine run and accelerate smoothly. This will give you good fuel economy and effective emissions control. The following shift points are recommended:

Shift Up

Normal Acceleration

1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th 5th to 6th

15 mph (24 km/h) 25 mph (40 km/h) 40 mph (64 km/h) 47 mph (75 km/h) 52 mph (83 km/h)

Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the rpm below the red zone.

Before downshifting, make sure the engine will not go into the tachometer’s red zone.

Reverse Lockout

The manual transmission has a lockout so you cannot accidentally shift from fifth to reverse instead of sixth while the vehicle is moving.

With the clutch pedal pressed, move the shift lever to the reverse side of the neutral gate. Then push the shift lever down, and shift to reverse.

124

Main MenuTable of Contentsst０５／０８／２９　１８：０７：３９　３１Ｓ２Ａ６６０　０１２８　

If the vehicle is facing uphill, turn the front wheels away from the curb, and put the transmission in first gear.

If the vehicle is facing downhill, turn the front wheels toward the curb, and put the transmission in reverse gear.

Make sure the parking brake is fully released before driving away. Driving with the parking brake partially set can overheat or damage the rear brakes.

Parking Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly or your vehicle may roll if it is on an incline.

Parking Tips

Make sure the convertible top and the windows are closed.

Turn off the lights.

Place any packages, valuables, etc., in the trunk or take them with you.

Lock the doors.

Never park over dry leaves, tall grass, or other flammable materials. The hot three way catalytic converter could cause these materials to catch on fire.

Parking, Braking System

Braking System Your vehicle is equipped with disc brakes at all four wheels. A power assist helps reduce the effort needed on the brake pedal. The anti-lock brake system (ABS) helps you retain steering control when braking very hard. Resting your foot on the pedal keeps the brakes applied lightly, builds up heat, and reduces their effectiveness. It also keeps your brake lights on all the time, confusing drivers behind you.

Constant application of the brakes when going down a long hill builds up heat and reduces their effective- ness. Use the engine to assist the brakes by taking your foot off the accelerator and downshifting to a lower gear.

CONTINUED

125

Main MenuTable of Contentsst０５／０８／２９　１８：０７：４６　３１Ｓ２Ａ６６０　０１２９　

Braking System, Anti-lock Brakes (ABS)

Brake Wear Indicators If the brake pads need replacing, you will hear a distinctive, metallic screeching sound when you apply the brake pedal. If you do not have the brake pads replaced, they will screech all the time. It is normal for the brakes to occasionally squeal or squeak when you apply them.

Check the brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Be extra cautious in your driving.

Braking System Design The hydraulic system that operates the brakes has two separate circuits. Each circuit works diagonally across the vehicle (the left-front brake is connected with the right-rear brake, etc.). If one circuit should develop a problem, you will still have braking at two wheels.

126

Anti-lock Brakes (ABS) The anti-lock brake system (ABS) helps prevent the brakes from locking up and helps you retain steering control by pumping the brakes rapidly; much faster than a person.

Youshouldneverpumpthebrakepedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as ‘‘stomp and steer.’’

You will feel a pulsation in the brake pedal when the ABS activates, and may hear some noise. This is normal: it is the ABS rapidly pumping the brakes. On dry pavement, you will need to press on the brake pedal very hard before the ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.

Main MenuTable of Contentsst０５／０８／２９　１８：０７：５４　３１Ｓ２Ａ６６０　０１３０　

Anti-lock Brakes (ABS)

ABS Indicator

ANTI-LOCK BRAKE SYSTEM INDICATOR

If this indicator comes on, the anti- lock function of the braking system has shut down. The brakes still work like a conventional system, but without anti-lock. You should have your dealer inspect your vehicle as soon as possible.

Important Safety Reminders ABS does not reduce the time or distance it takes to stop the vehicle; control during braking.

it only helps with steering

ABS will not prevent a skid that results from changing direction abruptly, such as trying to take a corner too fast or making a sudden lane change.

ABS cannot prevent a loss of stability. Always steer moderately when you are braking hard. Severe or sharp steering wheel movement can still cause your vehicle to veer into oncoming traffic or off the road.

A vehicle with ABS may require a longer distance to stop on loose or uneven surfaces, such as gravel or snow, than a vehicle without anti- lock.

127

Main MenuTable of ContentsstWithout VSA, your vehicle still has normal braking and cornering ability, but it does not have VSA traction and stability enhancement.

０５／０８／２９　１８：０８：０２　３１Ｓ２Ａ６６０　０１３１　

Vehicle Stability Assist (VSA) System

VSA Activation Indicator

When VSA activates, you will see the VSA activation indicator blink (see page

50

).

VSA System Indicator

If this indicator comes on while driving, pull to the side of the road when it is safe, and turn off the engine. Reset the system by restarting the engine. If the VSA system indicator stays on, or comes back on while driving, have the VSA system inspected by your dealer.

If the indicator does not come on when the ignition switch is turned to the ON (II) position, there may be a problem with the VSA system. Have your dealer inspect your vehicle as soon as possible (see page

50

).

The vehicle stability assist (VSA) system helps to stabilize the vehicle during cornering if the vehicle turns more or less than desired. It also assists you in maintaining traction while accelerating on loose or slippery road surfaces. It does this by regulating the engine’s output and by selectively applying the brakes.

When VSA activates, you may notice that the engine does not respond to the accelerator in the same way it does at other times.

The VSA system cannot enhance the vehicle’s driving stability in all situations and does not control your vehicle’s entire braking system. It is still your responsibility to drive and corner at reasonable speeds and to leave a sufficient margin of safety.

128

Main MenuTable of Contentsst０５／０８／２９　１８：０８：１０　３１Ｓ２Ａ６６０　０１３２　

Vehicle Stability Assist (VSA) System, Towing a Trailer

VSA Off Switch

VSA and Tire Sizes Driving with varying tire or wheel sizes may cause the VSA to malfunction. When replacing tires, make sure they are of the same size and type as your original tires (see page

164

).

Deactivate the VSA system if you need to drive with the compact spare tire installed (see page

170

).

If you install winter tires, make sure they are the same size as those that were originally supplied with your vehicle. Exercise the same caution during winter driving as you would if your vehicle was not equipped with VSA.

VSA OFF SWITCH

This switch is at the left side of the right vent. Press it to turn VSA on and off.

When VSA is off, the VSA activation indicator comes on as a reminder.

VSA is turned on every time you start the engine, even if you turned it off the last time you drove the vehicle.

Towing a Trailer Your vehicle is not designed to tow a trailer; Attempting to do so can void your warranties.

129

Main MenuTable of Contentsst０５／０８／２９　１８：０８：１８　３１Ｓ２Ａ６６０　０１３４　

Maintenance

This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions.

This section also includes instructions on how to read the maintenance minder messages on the information display, a maintenance record, and instructions for simple maintenance tasks you may want to take care of yourself.

If you have the skills and tools to perform more complex maintenance tasks on your vehicle, you may want to purchase the service manual. See page for information on how to obtain a copy, or see your dealer.

209

Maintenance Safety Maintenance Minder Maintenance Record Fluid Locations Adding Engine Oil Changing the Oil and Filter Engine Coolant Windshield Washers Manual Transmission Fluid Differential Fluid Brake and Clutch Fluid Lights Cleaning the Seat Belts Floor Mats Dust and Pollen Filter Wiper Blades Tires Checking the Battery Vehicle Storage

...................... .................... .................... .............................. ........................ ......... .............................. .................... ........ .......................... ................ ............................................. ................ ..................................... .................. ................................. ............................................... ................... .............................

. 132
. 133
. 140
. 142
. 143
. 144
. 146
. 148
. 149
. 150
. 151
. 152
. 157
. 158
. 158
. 159
. 160
. 166
. 167

131

Main Menust０５／０８／２９　１８：０８：２７　３１Ｓ２Ａ６６０　０１３５　

Maintenance Safety

All service items not detailed in this section should be performed by a certified technician or other qualified mechanic.

Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required.

Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.

To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.

To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the battery and all fuel-related parts.

Wear eye protection and protective clothing when working with the battery or compressed air.

132

Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.

Always follow the inspection, maintenance recommendations, and schedules in this owner’s manual.

Potential Vehicle Hazards Carbon Monoxide poison from engine exhaust. there is adequate ventilation whenever you operate the engine.

Be sure

Burns from hot parts. Let the engine and exhaust system cool before touching any parts.

Injury from moving parts. not run the engine unless instructed to do so.

Do

Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this owner’s manual.

Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.

Main MenuTable of Contentsst０５／０８／２９　１８：０８：３５　３１Ｓ２Ａ６６０　０１３６　

Your vehicle displays engine oil life and maintenance service items on the information display to show you when you should have your dealer perform engine oil replacement and indicated maintenance service.

Based on the engine operating conditions and accumulated engine revolutions, the onboard computer in your vehicle calculates the remaining engine oil life and displays it as a percentage.

Maintenance Minder

Engine Oil Life Indicator

TRIP BUTTON

The remaining engine oil life is displayed on the engine oil life display according to this table:

Calculated Engine

Displayed

ENGINE OIL LIFE DISPLAY

To see the current engine oil life, turn the ignition switch to the ON (II) position, and push and release the TRIP button repeatedly until the engine oil life display appears (see page

51

).

Oil Life (%) 91 % 100 % 81 % 90 % 71 % 80 % 61 % 70 % 60 % 51 % 41 % 50 % 31 % 40 % 21 % 30 % 16 % 20 % 15 % 11 % 10 % 6 % 5 % 1 %

− − − − − − − − − − − − 0 %

Engine Oil Life (%)

100 % 90 % 80 % 70 % 60 % 50 % 40 % 30 % 20 % 15 % 10 % 5 % 0 %

CONTINUED

133

Main MenuTable of Contentsst０５／０８／２９　１８：０８：４０　３１Ｓ２Ａ６６０　０１３７　

The maintenance item code or codes indicate the main and sub items required at the time of the oil change (see page

140

).

Maintenance Minder

MAINTENANCE MINDER INDICATOR

ENGINE OIL LIFE INDICATOR

MAINTENANCE ITEM CODE(S)

If the remaining engine oil life is 15
to 6 percent, you will see the engine oil life indicator every time you turn the ignition switch to the ON (II) position. The maintenance minder indicator will also come on, and the maintenance item code(s) for other scheduled maintenance items needing service will be displayed next to the engine oil life indicator.

134

When the remaining engine oil life is 5 to 1 percent, you will see a ‘‘SERVICE OIL LIFE’’ message along with the same maintenance item code(s), every time you turn the ignition switch to the ON (II) position.

Main MenuTable of Contentsst０５／０８／２９　１８：０８：４７　３１Ｓ２Ａ６６０　０１３８　

Maintenance Minder

The maximum total mileage shown is ‘‘ 9999.’’

−

You can change the information display from the engine oil life display to the odometer, the trip meter, or the outside temperature (if equipped) every time you press and release the TRIP button.

When the engine oil life is 0 percent or negative mileage, the maintenance minder indicator remains on even if you change the information display.

Immediately have the service performed, and make sure to reset the display as described on the next page.

135

When the remaining engine oil life is 0 percent, the engine oil life indicator will be blinking. The display comes on every time you turn the ignition switch to the ON (II) position. When you see this message, have the indicated maintenance performed by your dealer as soon as possible.

If you still do not perform the indicated maintenance, you will see a negative mileage. It is displayed when you drive over 10 miles (for U.S. models) or 10 km (for Canadian models) after seeing the 0 percent message. Afterward, it shows your driving distance if you continue to drive. Immediately have the indicated maintenance done by your dealer.

Main MenuTable of Contentsst０５／０８／２９　１８：０８：５６　３１Ｓ２Ａ６６０　０１３９　

Maintenance Minder

Maintenance Main Items and Sub Items

ENGINE OIL LIFE INDICATOR

MAINTENANCE ITEM CODE

Resetting the Engine Oil Life Indicator Your dealer will reset the display after completing the required maintenance service. You will see ‘‘OIL LIFE 100 %’’ on the odometer/ trip meter display the next time you turn the ignition switch to the ON (II) position.

If maintenance service is done by someone other than your dealer, reset the maintenance minder as follows:

When the vehicle needs maintenance, maintenance codes appear on the information display.

For an explanation of the maintenance codes, see page

139

1.

Turn the ignition switch to the ON (II) position.

2.

Press the TRIP button until the engine oil life indicator is displayed.

136

3.

Press the TRIP button for more than 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink.

Main MenuTable of Contentsst０５／０８／２９　１８：０９：０３　３１Ｓ２Ａ６６０　０１４０　

Important Maintenance Precautions If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.

Your authorized Honda dealer knows your vehicle best and can provide competent, efficient service.

4.

Press the TRIP button for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to ‘‘100.’’

Maintenance Minder

However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Make sure to have the service facility or person reset the display as previously described. Keep all receipts as proof of completion, and have the person who does the work fill out the maintenance record. Check your warranty booklet for more information.

We recommend using Honda parts and fluids whenever you have maintenance done. These are manufactured to the same high- quality standards as the original components, so you can be confident of their performance and durability.

CONTINUED

137

Main MenuTable of Contentsst０５／０８／２９　１８：０９：１１　３１Ｓ２Ａ６６０　０１４１　

−

Lights Check the operation of the headlights, parking lights, taillights, high-mount brake light, and license plate lights monthly. See page

152

Owner’s Maintenance Checks Youshouldcheckthefollowing items at the specified intervals. If you are unsure of how to perform any check, turn to the appropriate page listed.

−

−

111

Engine oil level Check every time you fill the fuel tank. See page Engine coolant level Check the radiator reserve tank every time you fill the fuel tank. See page Brakes and clutch Check the fluid level monthly. See page 151
Tires Check the tire pressure monthly. Examine the tread for wear and foreign objects. See page 161

112

−

−

Maintenance Minder

U.S. Vehicles: Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individual using parts that are ‘‘certified’’ to EPA standards.

＃

According to state and federal regulations, failure to perform maintenance on the items marked with will not void your emissions warranties. However, all maintenance services should be performed in accordance with the intervals indicated by the information display.

138

Main MenuTable of Contentsst０５／０８／２９　１８：０９：１９　３１Ｓ２Ａ６６０　０１４２　

Maintenance Minder

Symbol

Maintenance Main Items

Replace engine oil ＊ Replace engine oil and oil filter Inspect front and rear brakes Check parking brake adjustment Inspect these items:

Tie rod ends, steering gear box, and boots Suspension components Driveshaft boots Brake hoses and lines (including ABS) All fluid levels and condition of fluids Exhaust system ＃ Fuel lines and connections ＃

＊

1 :

If the message ‘‘SERVICE DUE NOW’’ does not appear more than 12 months after the display is reset, change the engine oil every year.

＃

NOTE:

See information on maintenance and emissions warranty on page

138

Independent of the maintenance minder messages, replace the brake fluid every 3 years. Inspect idle speed every 160,000 miles (256,000 km). Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy.

Symbol

Maintenance Sub Items

Check tire inflation and condition Replace air cleaner element

If you drive in dusty conditions, replace every 15,000
miles (24,000 km).

Replace dust and pollen filter

If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace every 15,000
miles (24,000 km).

Inspect drive belt Replace transmission fluid Replace spark plugs Inspect valve clearance Replace engine coolant Replace rear differential fluid

Driving in mountainous areas results in higher level of mechanical (shear) stress to fluid. This requires differential fluid changes more frequently than recommended by the maintenance minder. If you regularly drive your vehicle under these conditions, have the differential fluid changed every 15,000 miles (24,000 km).

139

Main MenuTable of Contentsst０５／０８／２９　１８：０９：２４　３１Ｓ２Ａ６６０　０１４３　

Maintenance Record

You or the servicing dealer can record all completed maintenance here. When maintenance is performed, record the mileage, circle the coded item(s) completed, and write in any other non-coded items (such as brake fluid replacement) below the codes. Keep the receipts for all work done on your vehicle. Maintenance can also be recorded in your Honda service history booklet.

Mileage

Maintenance Performed

Signature

Date

Mileage

Maintenance Performed

Signature

Date

mi km

mi km

mi km

mi km

mi km

mi km

mi km

A B 1

A B 1

A B 1

A B 1

A B 1

A B 1

A B 1

140

mi km

mi km

mi km

mi km

mi km

mi km

mi km

A B 1

A B 1

A B 1

A B 1

A B 1

A B 1

A B 1

Main MenuTable of Contentsst０５／０８／２９　１８：０９：２９　３１Ｓ２Ａ６６０　０１４４　

Mileage

Maintenance Performed

Signature

Date

Mileage

Maintenance Performed

Signature

Date

Maintenance Record

mi km

mi km

mi km

mi km

mi km

mi km

mi km

A B 1

A B 1

A B 1

A B 1

A B 1

A B 1

A B 1

mi km

mi km

mi km

mi km

mi km

mi km

mi km

A B 1

A B 1

A B 1

A B 1

A B 1

A B 1

A B 1

141

Main MenuTable of Contentsst０５／０８／２９　１８：０９：３３　３１Ｓ２Ａ６６０　０１４５　

Fluid Locations

WASHER FLUID (Blue cap)

ENGINE OIL DIPSTICK (Black handle)

142

ENGINE OIL FILL CAP

CLUTCH FLUID (Gray cap)

BRAKE FLUID (Gray cap)

ENGINE COOLANT RESERVOIR

RADIATOR CAP

Main MenuTable of Contentsst０５／０８／２９　１８：０９：４０　３１Ｓ２Ａ６６０　０１４６　

Adding Engine Oil

Make sure the API Certification Seal says ‘‘For Gasoline Engines.’’

API CERTIFICATION SEAL

Recommended Engine Oil Oil is major contributor to your engine’s performance and longevity. Always use a premium-grade detergent oil displaying the API Certification Seal. This seal indicates the oil is energy conserving, and that it meets the American Petroleum Institute’s latest requirements. It is highly recommended that you use Honda motor oil in your vehicle for as long as you own it.

CONTINUED

143

Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully so you do not spill. Clean up any spills immediately. Spilled oil could damage components in the engine compartment.

Install the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level. Do not fill above the upper mark; you could damage the engine.

Main MenuTable of Contentsst０５／０８／２９　１８：０９：４８　３１Ｓ２Ａ６６０　０１４７　

Adding Engine Oil, Changing the Oil and Filter

Synthetic Oil You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil: it displays the API Certification Seal, and it is the proper weight. You must follow the oil and filter change intervals shown on the information display.

Engine Oil Additives Your vehicle does not require any oil additives. Additives may adversely affect the engine or transmission performance and durability.

Changing the Oil and Filter Always change the oil and filter according to the recommendations in the maintenance schedule. The oil and filter collect contaminants that can damage your engine if they are not removed regularly.

Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service station- type hydraulic lift for this service. Unless you have the knowledge and proper equipment, you should have this maintenance done by a skilled mechanic.

1.

Run the engine until it reaches normal operating temperature, then shut it off.

The oil’s viscosity or weight is provided on the container’s label. Select the oil for your vehicle according to this chart.

Ambient Temperature

An oil with a viscosity of 10W-30 is preferred for optimum fuel economy and year-round protection in your vehicle. You may use 5W-40 oil if the temperature in your area goes below 0°F (

20°C).

−

144

Main MenuTable of Contentsst０５／０８／２９　１８：０９：５９　３１Ｓ２Ａ６６０　０１４８　

WASHER

OIL DRAIN BOLT

OIL FILTER

2.

Open the hood, and remove the engine oil fill cap. Remove the oil drain bolt and washer from the bottom of the engine. Drain the oil into an appropriate container.

3.

4.

Remove the oil filter, and let the remaining oil drain. A special wrench (available from your dealer) is required.

Check the oil filter to make sure its gasket did not stick to the engine block. A stuck gasket could cause an oil leak.

Changing the Oil and Filter

5.

Install a new oil filter according to the instructions that come with it. Make sure to clean off any dirt and dust on the connecting surface of a new oil filter.

6.

Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten the drain bolt to: 33 lbf·ft (45 N·m , 4.6 kgf·m)

7.

Refill the engine with the recommended oil.

Engine oil change capacity (including filter): 5.1 US qt (4.8 )

8.

Install the engine oil fill cap. Start the engine. The oil pressure indicator should go out within 5
seconds. If it does not, turn off the engine, and check your work.

CONTINUED

145

Main MenuTable of Contentsst０５／０８／２９　１８：１０：０６　３１Ｓ２Ａ６６０　０１４９　

Changing the Oil and Filter, Engine Coolant

9.

Let the engine run for several minutes, then check the drain bolt and oil filter for leaks.

Adding Engine Coolant

RESERVE TANK

10.

Turn off the engine and let it sit for several minutes, then check the oil level on the dipstick. If necessary, add more oil.

Improper disposal of engine oil can be harmf ul to the environment. If you change your own oil, please dispose of the used oil properly. Put it in a sealed container and take it to a recycling center. Do not discard it in a trash bin or dump it on the ground.

146

MAX

MIN

If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks.

Always use Honda Long-Life Antifreeze/Coolant Type 2. This coolant is pre-mixed with 50 % antifreeze and 50 % water. Never add straight antifreeze or plain water.

If Honda antifreeze/coolant is not available, you may use another major-brand non-silicate coolant as a temporary replacement. Make sure it is a high-quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.

Main MenuTable of Contentsst０５／０８／２９　１８：１０：１５　３１Ｓ２Ａ６６０　０１５０　

If the reserve tank is completely empty, you should also check the coolant level in the radiator.

Removing the radiator cap