2005 Honda Odyssey Owners Manual

To turn the subtitle on and off, select ‘‘Subtitle’’ from the setup menu by pressing the button. You will see submenu ‘‘OFF’’ or ‘‘ON.’’ Select ‘‘OFF’’ or ‘‘ON’’ by pressing the or ▲

▼ ▲

button.

▼

or

If more than one subtitle language is available, you will see the language currently selected when you select ‘‘ON’’ in the previous step. Select the desired subtitle language by pressing the Press the RETURN or ENT button to go back to the play mode setup menu.

▼ ▲

button.

or

On some DVDs, the scenes are recorded by more than one camera, giving different viewpoints of the same scene. To change the angle, select ‘‘Angle’’ from the setup menu. You will see a submenu if there are different angles available. Select the number on the submenu by pressing the Press the RETURN or ENT button to go back to the play mode setup menu.

▼ ▲

button.

or

CONTINUED

241

Information Provided by:Rear Entertainment System

Search

When you select the ‘‘Search’’ from the play mode setup menu, you will see the submenu shown above. In the left submenu, you can select between ‘‘Title’’ and ‘‘Chapter.’’ The right submenu displays the current title or chapter number and the total number of titles or chapters.

242

or

▼ ▲

▼ ▲

To do a title search, select ‘‘Title’’ by pressing the button. Change the number on the right submenu by pressing the press the ENT button to begin the title search. If you press the RETURN button, the display returns to the play mode setup menu without doing the search.

button, and

or

or

or button, and press the ENT button

To do a chapter search, select ‘‘Chapter’’ by pressing the ▼ ▲ button. Change the number on the right submenu by pressing the ▼ ▲ to begin the chapter search. If you press the RETURN button, the display returns to the play mode setup menu without doing the search.

Information Provided by:Num Input

A numerical command can be issued to a DVD by inputting a two digit number, and a button number can be selected on the screen.

Select the ‘‘Num Input’’ from the play mode setup menu. The screen will change as shown above. If you select the ‘‘Move Key’’ using the

button, and

, or

press the ENT button, the Num Input display on the screen will

Rear Entertainment System

Select and enter the second digit number the same way. The cursor will automatically move to the ‘‘ENT’’ icon when you press the ENT button. Press the ENT button to enter the number command. To go back to the DVD screen, press the RETURN button.

CONTINUED

243

change from the left side to right side or right to left.

Select the first digit number using the

, or

button, and enter it by pressing

the ENT button. If you want to change the number, select ‘‘DEL,’’ and press the ENT button, then select and enter the new number.

Information Provided by:Rear Entertainment System

PersonalSurround

are playing.

Display

or

▼ ▲

Select ‘‘Cinema,’’ ‘‘Music,’’ or ‘‘Voice’’ by pressing the button, and enter your selection by pressing the ENT button. The ‘‘PERSONAL SURROUND’’ logo is displayed in the upper right corner of the screen.

If you select ‘‘Off,’’ the logo disappears, and there will be no special sound effect.

When you select ‘‘PERSONAL SURROUND’’ by pressing the

or

button, the personal surround setup menu is displayed above the ‘‘PERSONAL SURROUND’’ icon.

Selecting one of the sound effects, Cinema, Music, or Voice, from the personal surround menu allows you to change the sound in your headphones to match the disc you

244

or

To adjust the display, select ‘‘Display’’ by pressing the

button, and enter your

selection by pressing the ENT button. The display changes as shown above. You can adjust these display settings:

Back Light Contrast Brightness Tint Color

Information Provided by:Rear Entertainment System

The display changes as shown above.

Select ‘‘Yes,’’ and press the ENT button. You will see the message ‘‘Default display settings applied’’ on the display for 5 seconds.

245

If you want to set the display to the default setting, select ‘‘Reset’’ by pressing the button, and, then pressing the ENT button.

▼ ▲

or

or

▼ ▲

Select the quality you want to adjust by pressing the button, and then pressing the ENT button. The adjustment bar is displayed next to the selected item. Adjust the setting by pressing the button. When you are finished with your adjustment, press the ENT button.

or

Information Provided by:Rear Entertainment System

Screen Mode You can set the screen mode to these settings:

Normal Wide Zoom Full

246

Normal

Wide

Zoom

Full

Information Provided by:Select the ‘‘Aspect Ratio’’ by pressing the the ENT button.

button, then press

or

The selectable setting menu is displayed, and the current setting is highlighted in blue.

Select the desired setting by pressing the press the ENT button.

▼ ▲

or

button, then

Rear Entertainment System

The selected setting will be highlighted in blue for one second, and the screen returns to the play mode in the selected setting.

CONTINUED

247

Information Provided by:Rear Entertainment System

INITIALSETTINGSMenu

INITIALSETTINGS(Language)

Menu Language

When you select ‘‘Language’’ with the button, the menu shown above appears.

or

To retune to the stop or prestop screen, select ‘‘Close’’ using the

or

button, and then press

the ENT, or the SETUP button.

To select the language used in the DISC menus, select ‘‘Menu Lang’’ by pressing the button. You will see the submenu next to ‘‘Menu Lang.’’

▼ ▲

or

When you press the SETUP button on the rear control panel when a DVD is not playing, the ‘‘INITIAL SETTINGS’’ menu is displayed.

There are two selectable menus: ‘‘Language’’ and ‘‘Others.’’

248

Information Provided by:Rear Entertainment System

If you want another language than those listed, you need to enter the code number of the desired language. Select ‘‘other,’’ and press the ENT button. The display changes as shown in the next column.

If you select the ‘‘No,’’ and press the ENT button, the display returns to the initial screen of the ‘‘Language’’ menu.

CONTINUED

249

Select the desired language by pressing the then pressing the ENT button.

▼ ▲

button, and

or

The selectable languages are, English, French, Spanish, German, Italian, Dutch, and Japanese.

Information Provided by:Rear Entertainment System

Audio Language

If you select ‘‘Yes,’’ the display changes to the language code input mode. Select the first number digit using the

, or button, and press the ENT

button to enter it. Repeat this until all four digits are filled. When the fourth digit is entered, the cursor automatically moves to ‘‘ENT’’ on the display. Press the ENT button on the control panel to enter the new language code.

250

If you made a mistake entering a number digit, select ‘‘DEL’’ on the display with the or button, and press the ENT button on the control panel. Then select and enter the correct number digit as described. The display returns to the initial ‘‘Language’’ menu screen.

You can select the dubbed language before playing DVDs. Select ‘‘Audio Lang’’ by pressing the button. You will see the ▼ ▲ submenu next to ‘‘Audio Lang.’’

or

Follow the same instructions you used to set the menu language.

Information Provided by:Subtitle Language

INITIALSETTINGS(Others)

Dynamic Range

Rear Entertainment System

You can select the subtitle language before playing DVDs. Select ‘‘Subtitle Lang’’ by pressing the button. You will see the submenu next to the ‘‘Subtitle Lang.’’

▼ ▲

or

Follow the same instructions you used to set the menu language.

When you select ‘‘Others’’ at the bottom of the ‘‘INITIAL SETTINGS’’ screen, the above menu appears on the screen.

‘‘Dynamic Range’’ reduces the differences between the loud and quiet sound levels throughout the disc. When this is on, the louder sounds are lowered, and quieter sounds are increased.

CONTINUED

251

Information Provided by:Rear Entertainment System

Angle Mark

ANGLE MARK

When you switch to another angle while playing a DVD, the angle mark is displayed in the upper right corner of the screen.

You can set the system to display or not display this angle mark.

When you select the ‘‘Dynamic Range’’ by pressing the ▼ ▲ button, you will see the submenu next to the ‘‘Dynamic Range’’ as shown above.

or

To turn ‘‘Dynamic Range’’ on or off, select ‘‘ON’’ or ‘‘OFF’’ by pressing the button, and then press the ENT button.

or

252

or

Select ‘‘Angle Mark’’ by pressing the button. The above submenu ▼ ▲ appears. If you want the angle mark to be displayed, select ‘‘ON’’ with the button, and then press the ENT button. The display returns to the ‘‘Others’’ menu.

or

Information Provided by:Parental Control Level

You can place an auditory restriction by changing the parental control level. The higher the level number, the lower the restriction.

or

▼ ▲

Select ‘‘Parental Level’’ by pressing the button. You will see the submenu shown above. If you select ‘‘No,’’ and press the ENT button, the display returns to the ‘‘Others’’ menu.

Rear Entertainment System

When you select and enter ‘‘Yes,’’ the display changes as shown above. To change the level, you need to enter your four digit password. Select the number for the first digit by pressing the

, or button, and enter it by pressing the ENT button. Repeat this until all four digits are filled. When you enter the fourth number, the cursor automatically moves to ‘‘ENT’’ on the display. Press the ENT button on the control panel. CONTINUED

253

Information Provided by:Rear Entertainment System

Changing the Password

If the system does not recognize the password you entered, you will see the above display. Repeat the parental control level steps until you enter the correct password.

If you enter the password correctly, you can then change the parental control level.

Once you correctly enter the button password, press the ▼ ▲ to change the level, and then press the ENT button to enter your selection.

or

The password was set to ‘‘1111’’ when the vehicle left the factory.

254

Information Provided by:Rear Entertainment System

If the system does not recognize the password you entered, you will see the above display. Repeat the password setting steps until you enter the correct password.

CONTINUED

255

To change the password, select ‘‘Password.’’ You will see the above menu displayed. Select ‘‘Yes’’ by pressing the button, then press the ENT button.

or

If you select ‘‘No,’’ and press the ENT button, the display returns to the ‘‘Others’’ menu.

Select the first digit by pressing the button,

, or

and enter it by pressing the ENT button. Repeat this until all four digits are entered. When you enter the fourth number, the cursor automatically moves to ‘‘ENT’’ on the display. Press the ENT button on the control panel.

Information Provided by:Rear Entertainment System

If you forget the password, select ‘‘Password,’’ and press the 10 times.

▲

button

The display changes as shown above. If you want to use the default password (1111), select ‘‘Yes,’’ and press the ENT button.

The message ‘‘Default password setting applied’’ is displayed for 5 seconds.

256

Information Provided by:Remote Control

RELEASE BUTTON

Replacing the Remote Control Batteries

COVER

The rear control panel can be detached from the ceiling unit and used as a remote control. To remove it from the ceiling unit, press the release button. The control panel will swing down partway. Pivot it down further past the detent until it detaches from the hinge. To reinstall it, reverse the procedure.

If it takes several pushes on the button to operate the rear entertainment system, have your dealer replace the batteries as soon as possible.

Battery type: BR3032

Rear Entertainment System

AsrequiredbytheFCC:Thisdevice complieswithPart15oftheFCCrules. Operationissubjecttothefollowingtwo conditions:(1)Thisdevicemaynot causeharmfulinterference,and(2)this devicemustacceptanyinterference received,includinginterferencethat maycauseundesiredoperation.

Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.

ThisdevicecomplieswithIndustry CanadaStandardRSS-210.Operationis subjecttothefollowingtwoconditions: (1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

257

Information Provided by:Those packages or jackets should also bear the designation of ‘‘1’’ or ‘‘ALL’’. DVD-ROMs cannot be played in this system.

Protecting DVDs The tips on how to handle and protect DVDs are basically the same as those for compact discs. Refer to ‘‘Protecting Your CDs’’ on page 221

Rear Entertainment System

Playable DVDs

There are various types of DVDs available. Some of them are not compatible with your system.

The DVD player in your rear entertainment system can play DVDs and CDs bearing the above marks on their packages or jackets.

258

Information Provided by:Rear Entertainment System

DVD Player Error Messages If you see an error message in the screen while operating the DVD player, find the cause in the chart to the right. If you cannot clear the message, take your vehicle to a dealer.

Message

ERROR F0
ERROR F2
Invalid region code Invalid disc

Parental control active. Change level to view.

Solution

Eject the disc and reinsert it.

Use a disc with the regional designation of ‘‘1’’ or ‘‘All’’. The disc is not playable in this unit. Eject the disc, and insert a disc compatible with this system. Reinsert the disc, and increase the parental control level (see pages 253 and 254 ).

259

Information Provided by:Rear Entertainment System

Wireless Headphones

VOLUME DIAL

Some state and local government agencies prohibit the use of headphones by the driver of a motor vehicle. Always obey applicable laws and regulations.

260

The audio for the rear entertainment system is sent to the wireless headphones that come with the system. When using the headphones, make sure you wear them correctly: L (left) and R (right) are marked on the sides of the frame. The antennas are in the front of the earpieces. If you wear the headphones backwards, the antennas will be aimed away from the system, affecting the sound quality and range.

To use the headphones, pivot the earpieces outward. This turns them on. To adjust the volume, turn the dial on the bottom of the right earpiece. When you remove the headphones, the earpieces automatically pivot inward, and the headphones turn off. When not in use, store the headphones in the pocket of either front seat.

ReplacingBatteries

TAB

Each headphone uses one AAA battery. The battery is under the cover on the left earpiece. To remove the cover, insert a coin in the slot and twist it slightly to pry the cover away from the earpiece. Pull the cover outward, and pivot it out of the way.

Information Provided by:Auxiliary Input Jacks

COVER

ARMREST

LEVER

BATTERY

Remove the battery. Install the new battery in the earpice as shown in the diagram next to the battery slot. Slide the cover back into place on the earpiece, then press down on the back edge to lock it in place.

Auxiliary input jacks and headphone connectors for the rear entertainment system are under the third seat armrest on the driver’s side. To access these connectors, open the cover by pulling up on the lever.

Rear Entertainment System

AUXILIARY INPUT JACKS

The system will accept auxiliary inputs from standard video games and video equipment. Some video game power supplies may cause poor picture quality.

V = Video jack L = Left audio jack R = Right audio jack

CONTINUED

261

Information Provided by:Rear Entertainment System

VOLUME DIALS

HEADPHONE CONNECTORS

There are three headphone connectors for the third seat passengers. Each connector has its own volume control.

262

Information Provided by:OnEXandTouringmodels The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights, parking lights, side marker lights and taillights flashes if someone attempts to break into your vehicle or remove the radio. This alarm continues for 2 minutes, then the alarm stops. To reset an alarming system before the 2
minutes have elapsed, unlock either front door with the key or the remote transmitter.

The security system automatically sets 15 seconds after you lock the doors, hood, and the tailgate. For the system to activate, you must lock the doors and the tailgate from the outside with the key, the lock tab, the door lock switch, or the remote transmitter. The security system indicator in the instrument panel starts blinking immediately to show you the system is setting itself.

Security System

The security system will not set if the hood, tailgate, or any door is not fully closed. If the system will not set, check the Door and Tailgate Open Monitor on the instrument panel (see page ), to see if the doors and the tailgate are fully closed. Since it is not part of the monitor display, manually check the hood.

67

SECURITY SYSTEM INDICATOR

Do not attempt to alter this system or add other devices to it.

Once the security system is set, opening any door, the tailgate, or the hood without using the key or the remote transmitter, will cause it to alarm. It also alarms if the radio is removed from the dashboard or the wiring is cut.

263

Information Provided by:Cruise Control

Cruise control allows you to maintain a set speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. It should be used for cruising on straight, open highways. It is not recommended for city driving, winding roads, slippery roads, heavy rain, or bad weather.

Improper use of cruise control can lead to a crash.

Use cruise control only when traveling on open highways in good weather.

264

Using Cruise Control

CRUISE BUTTON

CANCEL BUTTON

DECEL/SET BUTTON

RES/ACCEL BUTTON

1.

Push the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on.

2.

Accelerate to the desired cruising speed above 25 mph (40 km/h).

3.

Press and release the DECEL/ SET button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated.

Cruise control may not hold the set speed when you are going up and down hills. If your speed increases going down a hill, use the brakes to slow down to the desired speed. This will cancel cruise control. To resume the set speed, press the RES/ ACCEL button. The CRUISE CONTROL indicator on the instrument panel comes on.

When climbing a steep hill, the automatic transmission may downshift to hold the set speed.

Information Provided by:Changing the Set Speed You can increase the set speed in any of these ways:

Press and hold the RES/ACCEL button. When you reach the desired speed, release the button.

Push the accelerator pedal, accelerate to the desired speed, and press the DECEL/SET button.

To increase the speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, your vehicle will speed up about 1 mph (1.6 km/h).

You can decrease the set speed in any of these ways:

Press and hold the DECEL/SET button. Release the button when you reach the desired speed.

To slow down in very small amounts, tap the DECEL/SET button repeatedly. Each time you do this, your vehicle will slow down about 1 mph (1.6 km/h).

Tap the brake pedal lightly with your foot. The CRUISE CONTROL indicator on the instrument panel goes out. When the vehicle slows to the desired speed, press the DECEL/SET button.

Cruise Control

Even with cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set speed.

Resting your foot on the brake pedal causes cruise control to cancel.

CONTINUED

265

Information Provided by:Resuming the Set Speed When you push the CANCEL button or tap the brake pedal, the system remembers the previously set speed. To return to that speed, accelerate to above 25 mph (40 km/h), and then press and release the RES/ACCEL button. The CRUISE CONTROL indicator comes on. The vehicle accelerates to the same speed as before.

Pressing the CRUISE button turns the system completely off and erases the previous set speed.

Cruise Control

Cancelling Cruise Control

CRUISE BUTTON

CANCEL BUTTON

You can cancel cruise control in any of these ways:

Tap the brake pedal.

Push the CANCEL button on the steering wheel.

Push the CRUISE button on the steering wheel.

266

Information Provided by:OnEXandTouringmodels The HomeLink Universal Transceiver built into your vehicle can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.

General Information If you are training HomeLink to operate a garage door or gate, you should unplug the motor for that device during training. Repeatedly pressing the remote control button could burn out the motor.

HomeLink stores the code in a permanent memory. There should be no need to retrain HomeLink if your vehicle’s battery goes dead or is disconnected. If your garage door opener was manufactured before April 1982, you may not be able to program HomeLink to operate it. They do not have the safety feature

HomeLink Universal Transceiver

that causes the motor to stop and reverse if an obstacle is detected during closing, increasing the risk of injury.

Important Safety Precautions Always refer to the opening instructions and safety information that came with your garage door opener or other equipment you intend to operate with HomeLink. If you do not have this information, contact the manufacturer of the equipment.

If you just

Training HomeLink Before you begin − received your vehicle and have not trained any of the buttons in HomeLink before, you should erase any previously learned codes before training the first button.

To do this, press and hold the two outside buttons on the HomeLink Transceiver for about 20 seconds, or until the red indicator flashes. Release the buttons, then go to step 1.

If you are training the second or third buttons, go directly to step 1.

CONTINUED

267

Information Provided by:HomeLink Universal Transceiver

3.

Press and hold the remote control button and one of the HomeLink buttons at the same time.

6.

The remote control you are training f rom may stop transmitting af ter 2
seconds. This is not enough f or HomeLink to learn the code. Release and press the button on the remote control every 2 seconds until HomeLink has learned the code.

4.

5.

The red indicator in HomeLink should begin flashing. It will flash slowly at first, then rapidly.

When the red indicator flashes rapidly, release both buttons. HomeLink should have learned the code from the remote control.

1.

Unplug the garage door opener motor from the house current.

2.

Hold the end of the garage door opener remote control 2 to 5
inches from HomeLink. Make sure you are not blocking your view of the red indicator in HomeLink.

268

Plug in the garage door opener motor, then test the HomeLink button by pushing it. If the button does not work, repeat the procedure to train it again. If it still does not work, you may have a variable or rolling code garage door opener. See if you do by pressing and holding the HomeLink button you just trained. If the red indicator blinks for 2
seconds then stays on, you have a rolling code garage door opener. Go to ‘‘Training with a Rolling Code System’’ (see page ).

269

7.

Repeat these steps to train the other two HomeLink buttons to operate any other remotely controlled devices around your home (lighting, automatic gate, security system, etc.).

Information Provided by:Training With a Rolling Code System For security purposes, newer garage door opening systems use a ‘‘rolling’’ or variable code. Information from the remote control and the garage door opener are needed before HomeLink can operate the garage door opener.

The ‘‘Training HomeLink’’ procedure trains HomeLink to the proper garage door opener code. The following procedure synchronizes HomeLink to the garage door opener so it sends and receives the correct codes.

1.

2.

Make sure you have properly completed the ‘‘Training HomeLink’’ procedure.

Find the ‘‘Training’’ button on your garage door opener unit. The location will vary, depending on the manufacturer.

HomeLink Universal Transceiver

TRAINING BUTTON

4.

Press and hold the button on HomeLink for 3 to 4 seconds.

3.

Press the training button on the garage door opener unit until the indicator next to the button comes on. The indicator may blink, or come on and stay on. You then have approximately 30 seconds to complete the following steps.

5.

Press and hold the HomeLink button again for 3 to 4 seconds. This should turn off the training indicator on the garage door opener unit. (Some systems may require you to press the button up to three times.)

6.

Press the HomeLink button again. It should operate the garage door.

269

Information Provided by:HomeLink Universal Transceiver

Customer Assistance If you have problems with training the HomeLink Universal Transceiver, or would like information on home products that can be operated by HomeLink, call (800) 355-3515. On the Internet, go to www.homelink.com.

HomeLink is a registered trademark of Johnson Controls, Inc.

Erasing Codes To erase the codes stored in all three buttons, press and hold the two outside buttons until the red indicator begins to flash, then release the buttons.

You should erase all three codes before selling the vehicle.

Retraining a Button To train an already programmed HomeLink button with a new device, you do not have to erase all the memory. Train the selected button over the existing memory code following the steps under ‘‘Training HomeLink’’.

AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.

Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.

ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

270

Information Provided by:OnTouringmodel Your vehicle has a parking sensor system. The system lets you know the approximate distance between your vehicle and most obstacles while you are parking. When the system is on and your vehicle is nearing an obstacle, you will hear beeping and see parking messages in the multi-information display.

Parking Sensor System

PARKING SENSOR SYSTEM BUTTON

To activate the system, push the button on the dashboard with the ignition in the ON (II) position. The indicator in the button comes on when the system is on. To turn the system off, push the button again.

All obstacles may not always be sensed. Even when the system is on, you should look for obstacles near your vehicle to make sure it is safe to park.

MULTI-INFORMATION DISPLAY

The system has two front corner sensors, two rear corner sensors, and a rear center sensor. The rear center sensor works only when the shift lever is in Reverse (R), and the vehicle speed is less than 5
mph (8 km/h).

The corner sensors work only when the shift lever is in any position other than P and the vehicle speed is less than 5 mph (8 km/h).

271

Information Provided by:Parking Sensor System

Multi-Information Display Messages and Beeper Operation When you turn the system on, all indicators come on in the multi- information display, and a beeper sounds once.

When the system senses an obstacle, the appropriate indicator comes on, and a beeper sounds as shown in the following tables.

CornerSensorOperation Example shown: Obstacle is at the left front of the vehicle

About 16-20 in (40-50 cm)

About 12-16 in (30-40 cm)

About 12 in (30 cm) or less

Distance

Indicators and Messages

Upper left indicator stays on

Upper left indicator stays on

Upper left indicator stays on

Beeper

Short beeps

Very short beeps

Continuous beep

272

Information Provided by:RearCenterSensorOperation

About 40-70 in (1-1.8 m)

About 24-40 in (0.6-1 m)

About 24 in (0.6 m) or less

Distance

Indicators and Messages

Bottom indicator stays on

Bottom indicator stays on

Bottom indicator stays on

Beeper

Short beeps

Very short beeps

Continuous beeps

Parking Sensor System

If the system develops a problem, you will see a ‘‘CHECK PARKING SENSOR SYSTEM’’ message in the multi-information display, and a beeper sounds continuously. Very often, a sensor covered with mud, ice, snow, etc. is the cause of this message. Check the sensors first. If the message stays on or the beeper does not stop, have the system checked by your dealer.

CONTINUED

273

Information Provided by:Parking Sensor System

Within about 20 in (50 cm)

Within about 70 in (1.8 m)

The range of the corner sensors and the rear center sensor are limited. Each corner sensor is capable of sensing an obstacle only when your vehicle is 20 in (50 cm) or closer. The rear center sensor senses an obstacle that is behind your vehicle 70 in (1.8 m) or closer.

Do not put any accessories on or around the sensors.

The system may not function properly under these conditions:

The sensors are covered with snow, ice, mud, etc. When the vehicle is on a rough road, on grass, or on a hill.

274

After the vehicle has been sitting out in hot or cold weather. When the system is affected by some electrical equipment or devices generating an ultrasonic wave. When operating the vehicle in bad weather.

The system may not sense thin or low objects, or sonic-absorptive materials such as snow, cotton, or sponge.

The system cannot sense objects directly under the bumper.

CanadianOwners: ThisdevicecomplieswithIndustry CanadaStandardRSS-210.Operationis subjecttothefollowingtwoconditions: (1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

Information Provided by:OnEXwithLeatherandTouring models

Whenever you shift to R (Reverse) with the ignition switch in the ON (II) position, the rear view is shown on the navigation system screen.

For the best picture, always keep the rear view camera clean, and do not cover the camera lens.

Rear View Camera and Monitor

When in reverse, the touch screen and Navi ‘‘hard’’ buttons are locked out, except the ‘‘ZOOM’’ button. Touching the ‘‘ ’’ button allows you to adjust the brightness of the rear view camera image.

’’ or ‘‘

▼

▲

The camera brightness cannot be adjusted by voice control.

Since the rear view camera display area is limited, you should always back up slowly and carefully, and look behind you for obstacles.

275

Information Provided by:276

Information Provided by:Before Driving

Before you begin driving your vehicle, you should know what gasoline to use and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. The information in this section will help you. If you plan to add any accessories to your vehicle, please read the information in this section first.

Break-in period Gasoline Type Service Station Procedures

.............................. ............................... ......... ....................................

Refueling Opening and Closing the

. 278
. 278
. 279
. 279

Hood

Oil Check Engine Coolant Check

. 280
. 281
. 282
. 283
. 283
Accessories and Modifications . 284
. 286
Carrying Cargo

....................................... ................................... ............. ............................... ........ ... .............................

Improving Fuel Economy

Fuel Economy

277

Information Provided by:Break-in Period, Gasoline Type

Break-in Period Help assure your vehicle’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period:

Avoid full-throttle starts and rapid acceleration.

Avoid hard braking for the first 200 miles (300 km).

Do not change the oil until the scheduled maintenance time.

Do not tow a trailer.

You should also follow these recommendations with an overhauled or exchanged engine, or when the brakes are replaced.

Gasoline Type Your vehicle is designed to operate on unleaded gasoline with a pump octane number of 86 or higher. Use of a lower octane gasoline can cause a persistent, heavy metallic rapping noise that can lead to engine damage.

We recommend quality gasolines containing detergent additives that help prevent fuel system and engine deposits.

In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend, in areas where it is available, the use of gasoline that does NOT contain manganese-based fuel additives such as MMT.

Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact

278

your dealer for service.

Some gasoline today is blended with oxygenates such as ethanol or MTBE. Your vehicle is designed to operate on oxygenated gasoline containing up to 10 percent ethanol by volume and up to 15 percent MTBE by volume. Do not use gasoline containing methanol.

If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.

For further important fuel-related information, please refer to your Quick Start Guide

Information Provided by:Refueling

1.

Park with the driver’s side closest to the service station pump.

2.

Open the fuel fill door by pulling on the handle under the lower left corner of the dashboard.

Before refueling, make sure the rear sliding door on the driver’s side is closed.

3.

Remove the fuel fill cap slowly. You may hear a hissing sound as pressure inside the tank escapes. The fuel fill cap is attached to the fuel filler with a tether. Insert the attachment on the fuel fill cap into the slit on the fuel fill door.

4.

Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank. Leave some room for the fuel to expand with temperature changes.

even Ifthefuelnozzlekeepsclickingoff though the tank is not full, there may be a problem with your vehicle’s fuel vapor recovery system. The system helps keep fuel vapors from going into the atmosphere. Consult your dealer.

Service Station Procedures

Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.

Stop the engine, and keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately.

FUEL FILL CAP

CONTINUED

279

Information Provided by:Service Station Procedures

5.

Screw the fuel fill cap back on until it clicks at least three times. If you do not properly tighten the cap, the malfunction indicator lamp may come on (see page On the Touring model, you will also see a ‘‘CHECK FUEL CAP’’ message on the multi-information display.

372

).

Opening and Closing the Hood

HOOD RELEASE HANDLE

6.

Push the fuel fill door closed until it latches.

280

1.

Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly.

2.

Put your fingers under the front edge of the hood. The hood latch handle is above the ‘‘H’’ logo. Pull up on this handle until it releases the hood. Lift the hood.

LATCH

If the hood latch handle moves stiffly, or you can open the hood without lifting the handle, the mechanism should be cleaned and lubricated.

Information Provided by:Service Station Procedures

Oil Check

SUPPORT ROD

UPPER MARK LOWER MARK

DIPSTICK

Wait a few minutes after turning the engine off before you check the oil.

1.

Remove the dipstick (orange loop).

4.

Remove the dipstick again, and check the level. It should be between the upper and lower marks.

2.

Wipe off the dipstick with a clean cloth or paper towel.

3.

Insert it all the way back in its hole.

If it is near or below the lower mark, 328
see

Adding Engine Oil

on page

3.

Pull the support rod out of its clip and insert the end into the hole on the passenger’s side of the hood.

To close the hood, lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop. Make sure it is securely latched.

281

Information Provided by:Owner’s Maintenance on page

Refer to Checks for information about checking other items on your vehicle.

323

Service Station Procedures

Engine Coolant Check

MAX

RESERVE TANK

MIN

Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If Adding it is below the MIN line, see Engine Coolant for 331
information on adding the proper coolant.

on page

282

Information Provided by:Improving Fuel Economy

Always maintain your vehicle according to the maintenance Owner’s messages. See Maintenance Checks

(page

323

).

an underinflated tire Forexample, causes more ‘‘rolling resistance,’’ which uses more fuel.

The build-up of snow or mud on your vehicle’s underside adds weight and rolling resistance. Frequent cleaning helps your fuel mileage and reduces the chance of corrosion.

Drive moderately. Rapid acceleration, abrupt cornering, and hard braking use more fuel.

Always drive in the highest gear possible.

Try to maintain a constant speed. Every time you slow down and speed up, your vehicle uses extra fuel. Use cruise control when appropriate.

Combine several short trips into one.

The air conditioning puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible.

Fuel Economy

283

Information Provided by:Accessories and Modifications

Modifying your vehicle, or installing some non-Honda accessories, can make it unsafe. Before you make any modifications or add any accessories, be sure to read the following information.

Accessories Your dealer has Honda accessories that allow you to personalize your vehicle. These accessories have been designed and approved for your vehicle, and are covered by warranty.

Although non-Honda accessories may fit on your vehicle, they may not meet factory specifications, and could adversely affect your vehicle’s handling and stability (see page 285

).

Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be hurt or killed.

Follow all instructions in this owner’s manual regarding accessories and modifications.

When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your vehicle’s computer controlled systems, such as your airbags and anti-lock brakes.

284

Before installing any accessory:

Make sure the accessory does not obscure any lights, or interfere with proper vehicle operation or performance.

Be sure electronic accessories do not overload electrical circuits (see page the proper operation of your vehicle.

) or interfere with

376

Before installing any electronic accessory, have the installer contact your dealer. If possible, have your dealer inspect the final installation.

Information Provided by:Modifying Your Vehicle Removing parts from your vehicle, or replacing components with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability.

Some examples are:

Lowering the vehicle with a non- Honda suspension kit that significantly reduces ground clearance can allow the undercarriage to hit speed bumps or other raised objects, which could cause the airbags to deploy.

Raising your vehicle with a non-Honda suspension kit can affect the handling and stability.

Non-Honda wheels, because they are a universal design, can cause excessive stress on suspension components.

Accessories and Modifications

Larger or smaller wheels and tires can interfere with the operation of your vehicle’s anti-lock brakes and other systems.

Modifying your steering wheel or any other part of your vehicle’s safety systems could make the systems ineffective.

Additional Safety Precautions

See on page

35

If you plan to modify your vehicle, consult your dealer.

285

Information Provided by:Carrying Cargo

REAR COMPARTMENT

FRONT DOOR POCKET

SEAT-BACK POCKETS

REMOVABLE SECOND ROW CONSOLE ＊

UPPER GLOVE BOX

CENTER POCKET

IN-FLOOR STORAGE (with Lazy Susan ) ＊＊

SEAT-BACK POCKET

CARGO AREA

LOWER GLOVE BOX

Your vehicle has several convenient storage areas:

＊＊

Glove box (upper and lower) In-floor storage (with Lazy Susan ) Front door and seat-back pockets Rear cargo area, including the second row seats when removed, and the third row seat when folded flat Removable second row console Center pocket Rear compartment Roof-rack (if installed)

However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.

: Touring model only

: EX and Touring models only

＊ ＊＊

286

Information Provided by:The maximum load for your vehicle is: LX model: 1,349 lbs (612 kg) EX model: 1,388 lbs (630 kg) EX with Leather: 1,322 lbs (600 kg) Touring model: 1,208 lbs (548 kg)

This figure includes, cargo, accessories, and the tongue weight if you are towing a trailer.

To determine the correct cargo and luggage load limit:

1.

Locate the statement, ‘‘the combined weight of occupants and cargo should never exceed 1,208
lbs (548 kg)’’ on your vehicle’s placard (on the driver’s doorjamb) if your vehicle is the Touring model, for example.

2.

Determine the combined weight of the driver and passengers that will be riding in your vehicle.

Carrying Cargo

3.

4.

Subtract the combined weight of the driver and passengers from the maximum load.

The resulting figure equals the available amount of cargo and luggage load capacity.

6.

If your vehicle will be towing a trailer, the load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.

For example, If your vehicle is the Touring model, and if there will be five 150 lbs (70 kg) occupants in your vehicle, the amount of available cargo and luggage load capacity is 458 lbs (198 kg). (350 kg) 1,208 lbs (548 kg) = 458 lbs (198 kg)

150 lbs (70 kg) = 750 lbs

750 lbs (350 kg)