Download PDF Manual

the tones and continue the call.


To send a pound (


NOTE: ‘‘pound.’’ To send a star (*), say ‘‘star.’’


), say



10/07/09 18:45:49 31SWA640_288


Phonebook You can store up to 50 names with their associated numbers in HFL. The numbers you store can be not only phone numbers but other types, such as account numbers or passwords, which can be sent during a menu-driven call.


Tostoreaphonebookentry: Press and release the HFL Talk button before a command.


1.


Say ‘‘


Phonebook


.’’


2.


3.


Say ‘‘


Store


’’ after the prompts.


Say a name you want to list as your phonebook entry.


Bluetooth HandsFreeLink


NOTE:


Avoid using duplicate name entries.


Toeditthenumberstoredinaname: Press and release the HFL Talk button before a command.


Avoid using ‘‘home’’ as a name entry.


It is easier for HFL to recognize a multisyllabic or longer name. For example, use ‘‘Peter’’ instead of ‘‘Pete,’’ or ‘‘John Smith’’ instead of ‘‘John.’’


1.


Say ‘‘


Phonebook


.’’


2.


Say ‘‘


Edit


’’ after the prompts.


3.


Follow the HFL prompts and say the name entry you want to edit.


4.


When asked, say the new number for that name.


5.


Follow the HFL prompts to complete the edit.


4.


Say the number you want to store for the name entry.


5.


Follow the HFL prompts and say Enter ‘‘


’’ to store the entry.


CONTINUED


283


10/07/09 18:46:03 31SWA640_289


Bluetooth HandsFreeLink


Todeleteaname: Press and release the HFL Talk button before a command.


Tolistallnamesinthephonebook: Press and release the HFL Talk button before a command.


1.


Say ‘‘


Phonebook


.’’


1.


Say ‘‘


Phonebook


.’’


2.


3.


Say ‘‘


Delete


’’ after the prompts.


Say the name you want to delete and follow the HFL prompts to complete the deletion.


2.


Say ‘‘


List


’’ after the prompts.


3.


HFL begins reading the names in the order they were stored.


4.


If you hear a name you want to call, immediately press the HFL Talk button and say ‘‘


Call


.’’


Tostoreaspecificphonenumber fromyourcellphonedirectlytothe HFLphonebook(availableonsome phones): Press and release the HFL Talk button before a command.


1.


Say ‘‘


Phonebook


.’’


2.


3.


4.


Receive contact


Say ‘‘ prompts.


’’ after the


Follow the HFL prompts, select a number from your cell phone, and send it to HFL.


Follow the HFL prompts and name the number, or say Discard ‘‘ you want to store.


’’ if it is not the number


5.


Follow the HFL prompts if you want to store another number.


284


10/07/09 18:46:15 31SWA640_290


Cellular Phonebook (availableonsomephones)


Cellular Phonebook If you select from the Information screen menu, you will see five HFL options.


For a list of cell phones that are compatible with this feature:


In the U.S., visit com


or call (888) 528-7876.


handsfreelink.honda.


In Canada, visit or call (888) 528-7876.


www.handsfreelink.ca,


Bluetooth HandsFreeLink


ImportCellularPhonebook: The entire phonebook data of the cell phone that is linked to HFL can be imported to the navigation system.


SearchImportedPhonebook: Once a phonebook has been imported, you can search the phone numbers by the person’s name.


IMPORTED PHONEBOOK


PIN ICON


IMPORTED DATE


Import Cellular


Select ‘‘ Phonebook ,’’ and HFL will begin importing the phonebook. Select OK ‘‘


’’ after the import is completed.


Search Imported


Select ‘‘ Phonebook phonebooks will be displayed.


,’’ and a list of imported


Select a phonebook from the list.


CONTINUED


285


10/07/09 18:46:27 31SWA640_291


Bluetooth HandsFreeLink


Select a person from the list. Up to three category icons are displayed in the left side of the list:


Preference


Home


Mobile


Work


Pager


Fax


Car


Voice


Other


These indicate how many numbers are stored for the name. If a name has more than three category icons, ‘‘…’’ is displayed.


Select the person’s number you want to call, and press the HFL Talk button.


If the phonebook is PIN-protected, you will need to enter the 4-digit PIN.


List ICON


To search for a specific name in the phonebook, enter the keyword for either the first or last name.


To display all names in the List phonebook, select the ‘‘


’’ option.


286


10/07/09 18:46:38 31SWA640_292


DeleteImportedPhonebook: You can delete any imported phonebook.


After making a selection, the following screen will appear.


PIN Number You can add, change, or remove a PIN number from any phonebook.


Bluetooth HandsFreeLink


Delete Imported


Select ‘‘ Phonebook phonebooks will be displayed.


,’’ and a list of imported


Select a phonebook you want to delete. If the phonebook is PIN- protected, you will need to enter the 4-digit PIN number.


Yes Select ‘‘ the deletion.


,’’ then ‘‘


OK


’’ to complete


ToaddaPIN: If you have selected a phonebook without a PIN, you will see the above display.


Enter the new 4-digit PIN. You will have to re-enter the PIN for confirmation.


CONTINUED


287


PIN number


ToremoveaPIN: Select ‘‘ Do not use PIN ‘‘ the current PIN.


,’’ then select ’’ after you enter


10/07/09 18:46:45 31SWA640_293


Bluetooth HandsFreeLink


TochangethePINtoanewnumber:


Select the phonebook you want. The display will change as shown above.


The display will change as shown above.


Enter the current PIN for this phonebook.


Enter the new 4-digit PIN number. You will be asked to re-enter the PIN for verification.


288


10/07/09 18:46:53 31SWA640_294


System Setup This command group allows you to change or customize HFL basic settings.


Toseta4-digitpasscodetolockthe HFLsystemforsecuritypurposes: Press and release the HFL Talk button before a command.


1.


Say ‘‘


System setup


.’’


2.


Say ‘‘


Security


’’ after the prompts.


3.


Follow the HFL prompts and say the 4-digit passcode you want to set.


4.


Follow the HFL prompts to confirm the number.


Bluetooth HandsFreeLink


Once a passcode is set, you NOTE: will need to enter it to use HFL each time you start the vehicle. If you forget the code, your dealer will have to reset it for you, or you will have to clear the entire system (see page 291


).


CONTINUED


289


10/07/09 18:47:06 31SWA640_295


Bluetooth HandsFreeLink


Tochangeyoursecuritypasscode: Press and release the HFL Talk button before a command.


1.


2.


Say ‘‘


System setup


.’’


Change passcode


’’ after the


Say ‘‘ prompts.


3.


Follow the HFL prompts and say the new 4-digit passcode.


4.


Follow the HFL prompts to confirm the number.


290


Toselecteitheraringtoneora promptastheincomingcall notification : Press and release the HFL Talk button before a command.



1.


2.


3.


Say ‘‘


System setup


.’’


Call notification


’’ after the


Say ‘‘ prompts.


Follow the HFL prompts and say Ring tone Prompt ‘‘ .’’ You ’’ for no audible can also say ‘‘ incoming call notification.


’’ or ‘‘ Off



The default setting is a ring tone.


Toactivateordeactivatetheauto transferfunction: If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL with the ignition switch in the ACCESSORY (I) or ON (II) position.


Press and release the HFL Talk button before a command.


1.


2.


3.


Say ‘‘


System setup


.’’


Auto transfer


Say ‘‘ prompts.


’’ after the


HFL will let you know if auto transfer is on or off, depending on the previous setting. Follow the HFL prompts to change the setting.


10/07/09 18:47:19 31SWA640_296


Toclearthesystem: This operation clears the passcodes, paired phones, all names in the HFL phonebook, and all imported phonebook data.


Quick Language Selection Canadianmodelsonly Toquicklychangethelanguage: Press and release the HFL Talk button before a command.


Press and release the HFL Talk button before a command.


1.


Say the language you want to change to in that language.


1.


Say ‘‘


System setup


.’’


2.


Follow the HFL prompts.


2.


Say ‘‘


Clear


’’ after the prompts.


3.


Follow the HFL prompts to continue to complete the clearing procedure.


You can also clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say ‘‘ clear the HFL phonebook and all imported phonebook data will be lost.


System .’’ Paired phones, all names in


Bluetooth HandsFreeLink


Change Language Canadianmodelsonly Tochangethesystemlanguage betweenEnglishandFrench: Press and release the HFL Talk button before a command.


1.


2.


Say ‘‘


Change language


.’’


Follow the HFL prompts to change the language to English or French.


If you have not named your paired phone in the language you just selected, HFL will ask you to name it in the current language.


When French is your currently selected language, you can give voice commands in French.


291


10/07/09 18:47:24 31SWA640_297


Bluetooth HandsFreeLink


Bluetooth


Bluetooth Wireless Technology The name and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honda Motor Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.


292


AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.


Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.


ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.


10/07/09 18:47:28 31SWA640_298


Before Driving


Before you begin driving your vehicle, you should know what gasoline to use and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. The information in this section will help you. If you plan to add any accessories to your vehicle, please read the information in this section first.


Break-in Period Fuel Recommendation Service Station Procedures


............................. ................. ......... .................................... ........


Refueling Check Fuel Cap Message Opening and Closing


. 294
. 294
. 295
. 295
. 296


the Hood


Oil Check Engine Coolant Check


. 297
. 298
. 298
Fuel Economy . 299
Accessories and Modifications . 302
. 304
Carrying Cargo


................................ ................................... ............. ............................... ... .............................


293


10/07/09 18:47:38 31SWA640_299


Break-in Period, Fuel Recommendation


Break-in Period Help assure your vehicle’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period:


Avoid full-throttle starts and rapid acceleration.


Do not change the oil until the scheduled maintenance time.


Avoid hard braking for the first 200 miles (300 km).


Do not tow a trailer.


You should also follow these recommendations with an overhauled or exchanged engine, or when the brakes are replaced.


Fuel Recommendation Your vehicle is designed to operate on unleaded gasoline with a pump octane number of 87 or higher. Use of a lower octane gasoline can cause a persistent, heavy metallic rapping noise that can lead to engine damage.


We recommended using a quality gasoline containing detergent additives that help prevent fuel system and engine deposits.


In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend, in areas where it is available, the use of gasoline that does NOT contain manganese-based fuel additives such as MMT.


Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact


your authorized dealer for service.


Some gasoline today is blended with oxygenates such as ethanol or MTBE. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume and up to 15% MTBE by volume. Do not use gasoline containing methanol.


If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.


For further important fuel-related information for your vehicle, or information on gasoline that does not contain MMT, visit Owner Link at . In Canada, visit owners.honda.com www.honda.ca information on gasoline.


for additional


294


10/07/09 18:47:47 31SWA640_300


Refueling


FUEL FILL DOOR RELEASE HANDLE


FUEL FILL CAP


TETHER


1.


Park with the driver’s side closest to the service station pump.


3.


2.


Open the fuel fill door by pulling on the handle located under the lower left corner of the dashboard.


Remove the fuel fill cap slowly. You may hear a hissing sound as pressure inside the tank equalizes. The fuel fill cap is attached to the fuel filler with a tether. Place the cap in the holder on the fuel fill door.


4.


Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank. This leaves some room in the fuel tank


Service Station Procedures


for the fuel to expand with temperature changes.


If the fuel nozzle keeps clicking off even though the tank is not full, there may be a problem with your vehicle’s fuel vapor recovery system. The system helps keep fuel vapor from going into the atmosphere. Try filling at another pump. If this does not fix the problem, consult your dealer.


Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.


Stop the engine, and keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately.


CONTINUED


295


10/07/09 18:47:55 31SWA640_301


Service Station Procedures


5.


Screw the fuel fill cap back on until it clicks at least once. If you do not properly tighten the cap, the malfunction indicator lamp may come on (see page will also see a ‘‘CHECK FUEL CAP’’ message on the information display.


). You


395


Check Fuel Cap Message


driving once you tighten or replace the fuel fill cap. To scroll to another display, press the select/reset knob.


The ‘‘CHECK FUEL CAP’’ message will appear each time you restart the engine until the system turns the message off.


6.


Push the fuel fill door closed until it latches.


296


Your vehicle’s onboard diagnostic system will detect a loose or missing fuel fill cap as an evaporative system leak. The first time a leak is detected a ‘‘CHECK FUEL CAP’’ message appears on the information display.


Turn the engine off, and confirm the fuel fill cap is installed. If it is, loosen it, then retighten it until it clicks at least once. The message should go off after several days of normal


If the system still detects a leak in your vehicle’s evaporative emissions system, the malfunction indicator lamp (MIL) comes on. If the fuel fill cap was not already tightened, turn the engine off, and check or retighten the fuel fill cap until it clicks at least once. The MIL should go off after several days of normal driving once the cap is tightened or replaced. If the MIL does not go off, have your vehicle inspected by a dealer. For more information, see page


395


10/07/09 18:48:03 31SWA640_302


Opening and Closing the Hood


HOOD RELEASE HANDLE


LATCH


GRIP


SUPPORT ROD


Service Station Procedures


1.


Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly.


CLIP


2.


Reach in between the hood and the front grille with your fingers. The hood latch handle is above the ‘‘H’’ logo. Push this handle up until it releases the hood. Lift the hood.


If the hood latch handle moves stiffly, or if you can open the hood without lifting the handle, the mechanism should be cleaned and lubricated.


3.


Holding the grip, pull the support rod out of its clip. Insert the end into the hole in the hood designated by an arrow.


To close the hood, lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop. Make sure it is securely latched.


297


10/07/09 18:48:13 31SWA640_303


Service Station Procedures


Oil Check


DIPSTICK


Wait a few minutes after turning the engine off before you check the oil.


1.


Remove the dipstick (orange handle).


2.


Wipe off the dipstick with a clean cloth or paper towel.


3.


Insert the dipstick all the way back into its hole.


298


UPPER MARK LOWER MARK


4.


Remove the dipstick again, and check the level. It should be between the upper and lower marks.


If it is near or below the lower mark, see 349


Adding Engine Oil


on page


Engine Coolant Check


MAX


RESERVE TANK


MIN


Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If Adding it is below the MIN line, see Engine Coolant for 352
information on adding the proper coolant.


on page


Owner’s Maintenance on page


Refer to Checks for information about checking other items on your vehicle.


346


10/07/09 18:48:21 31SWA640_304


Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits, and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments.


The EPA fuel economy estimates shown in the example to the right are a useful tool for comparison when buying a vehicle. EPA estimates include:



City MPG Represents urban driving in light traffic. A range of miles per gallon achieved is also provided.



Represents a


Highway MPG mixture of rural and interstate driving, in a warmed-up vehicle, typical of longer trips in free-flowing traffic. A range of miles per gallon


Fuel Economy


City MPG


Highway MPG


Combined Fuel Economy


Estimated Annual Fuel Cost


(Sample U.S. EPA label shown)


achieved is also provided.



Combined Fuel Economy Represents a combination of city and highway driving. The scale represents the range of combined fuel economy for other vehicles in the class.


Estimated Annual Fuel Cost − Provides an estimated annual fuel cost, based on 15,000 miles (20,000
km) per year multiplied by the cost


per gallon (based on EPA fuel cost data) divided by the combined fuel economy.


For more information on fuel economy ratings and factors that affect fuel economy, visit fueleconomy.gov vehicles.gc.ca


www. (Canada: Visit


www.


299


10/07/09 18:48:33 31SWA640_305


Fuel Economy


Fuel Economy Factors The following factors can lower your vehicle’s fuel economy:


Aggressive driving (hard acceleration and braking) Excessive idling, accelerating and braking in stop-and-go traffic Cold engine operation (engines are more efficient when warmed up) Driving with a heavy load or the air conditioner running Improperly inflated tires


Improving Fuel Economy


VehicleMaintenance A properly maintained vehicle maximizes fuel economy. Poor maintenance can significantly reduce fuel economy. Always maintain your vehicle according to the maintenance messages displayed on the multi- Owner’s information display (see Maintenance Checks on page 346
For example:


).


300


Use the recommended viscosity motor oil, displaying the API Certification Seal (see page 349


).


Maintain proper tire inflation An underinflated tire increases − ‘‘rolling resistance,’’ which reduces fuel economy.


Avoid carrying excess weight in your vehicle It puts a heavier load on the engine, increasing fuel consumption.




Keep your vehicle clean In particular, a build-up of snow or mud on your vehicle’s underside adds weight and rolling resistance. Frequent cleaning helps your fuel economy.


DriveEfficiently



Drive moderately acceleration, abrupt cornering, and hard braking increase fuel consumption.


Rapid



Observe the speed limit Aerodynamic drag has a big effect on fuel economy at speeds above 45 mph (75 km/h). Reduce your speed and you reduce the drag. Trailers, car top carriers, roof racks and bike racks are also big contributors to increased drag.


Avoid excessive idling Idling results in 0 miles per gallon (0 kms per liter).



10/07/09 18:48:43 31SWA640_306


Minimize the use of the air conditioning system puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible.


The A/C



Plan and combine trips Combine several short trips into one. A warmed-up engine is more fuel efficient than a cold one.



Calculating Fuel Economy


MeasuringTechniques Direct calculation is the recommended source of information about your actual fuel economy. Using frequency of fill-ups or taking fuel gauge readings are NOT accurate measures of fuel economy. Fuel economy may improve over the first several thousand miles (kilometers).


CheckingYourFuelEconomy


Fuel Economy


Miles driven


Gallons of fuel


Miles per Gallon


100


Liter


Kilometers


L per 100 km


1) 2) 3) 4)


Fill the fuel tank until the nozzle automatically clicks off. Reset trip counter to zero. Record the total gallons (liters) needed to refill. Follow one of the simple calculations above.


301


10/07/09 18:48:51 31SWA640_307


Accessories and Modifications


Modifying your vehicle, or installing some non-Honda accessories, can make your vehicle unsafe. Before you make any modifications or add any accessories, be sure to read the following information.


Accessories Your dealer has Honda accessories that allow you to personalize your vehicle. These accessories have been designed and approved for your vehicle, and are covered by warranty.


Although non-Honda accessories may fit on your vehicle, they may not meet factory specifications, and could adversely affect your vehicle’s handling, stability, and reliability.


Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be hurt or killed.


Follow all instructions in this owner’s manual regarding accessories and modifications.


When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your vehicle’s computer controlled systems, such as your airbags, anti-lock brakes, and tire pressure monitoring system.


Before installing any accessory:


Make sure the accessory does not obscure any lights, or interfere with proper vehicle operation or performance.


Be sure electronic accessories do not overload electrical circuits (see page ) or interfere with proper operation of your vehicle.


397


Before installing any electronic accessory, have the installer contact your dealer for assistance. If possible, have your dealer inspect the final installation.


Do not install accessories on the side pillars or across the rear windows. Accessories installed in these areas may interfere with proper operation of the side curtain airbags.


302


10/07/09 18:48:59 31SWA640_308


Accessories and Modifications


Modifying Your Vehicle Removing parts from your vehicle, or replacing components, with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability.


Here are some examples:


Lowering the vehicle with a non- Honda suspension kit that significantly reduces ground clearance can allow the undercarriage to hit speed bumps or other raised objects, which could cause the airbags to deploy.


Raising your vehicle with a non-Honda suspension kit can affect the handling, stability, and reliability.


Non-Honda wheels, because they are a universal design, can cause excessive stress on suspension components, and are not compatible with the tire pressure monitoring system (TPMS).


Larger or smaller wheels and tires can interfere with the operation of your vehicle’s anti-lock brakes and other systems.


Modifying your steering wheel or any other part of your vehicle’s safety features can make the systems ineffective.


If you plan to modify your vehicle, consult your dealer.


303


10/07/09 18:49:09 31SWA640_309


Carrying Cargo


DUAL DECK CARGO SHELF *


DOOR POCKETS


CARGO AREA


UPPER GLOVE BOX


SEAT-BACK POCKETS *


CENTER CONSOLE COMPARTMENT *


SEAT UNDER TRAY *


LOWER GLOVE BOX


CENTER POCKET



: If equipped


304


Your vehicle has several convenient storage areas:


Upper glove box Lower glove box Console compartment Door pockets Seat-back pockets Seat-under tray (if equipped) Center pocket Cargo area, including the rear seats when folded up or down. Upper and lower cargo areas with the dual deck cargo shelf (if equipped) Roof-rack (if equipped)


However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.


10/07/09 18:49:20 31SWA640_310


Carrying Cargo


Load Limits The maximum load for your vehicle is 850 lbs (385 kg) for U.S. vehicles, and 395 kg for Canadian vehicles.


See Tire And Loading Information label attached to the driver’s doorjamb.


Label Example


Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.


Follow all load limits and other loading guidelines in this manual.


This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.



Steps for Determining Correct Load Limit (1)


Locate the statement ‘‘The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.’’ on your vehicle’s placard.


(2)


Determine the combined weight of the driver and passenger that will be riding in your vehicle.


(3)


Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.


(4)


The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the ‘‘XXX’’ amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400


150) = 650 lbs.)


750 (5



×


(5)


Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.


(6)


If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.


CONTINUED


305


In addition, the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver’s doorjamb.


10/07/09 18:49:26 31SWA640_311


Carrying Cargo


Example 1


Example 2


Example 3


Max Load 850 lbs (395 kg) *


Passenger Weight 150 lbs x 2 = 300 lbs (68 kg x 2 = 136 kg)


Cargo Weight 550 lbs (259 kg) *


Max Load 850 lbs (395 kg) *


Passenger Weight 150 lbs x 4 = 600 lbs (68 kg x 4 = 272 kg)


Cargo Weight 250 lbs (123 kg) *


Max Load 850 lbs (395 kg) *


Passenger Weight 150 lbs x 5 = 750 lbs (68 kg x 5 = 340 kg)


Cargo Weight 100 lbs (55 kg) *



: Canadian models


306


10/07/09 18:49:35 31SWA640_312


Carrying Cargo in the Passenger Compartment


Store or secure all items that could be thrown around and hurt someone during a crash.


Be sure items placed on the floor behind the front seats cannot roll under the seats and interfere with the driver’s ability to operate the pedals, the operation of the seats, or the operation of the sensors under the seats.


Keep the lower glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.


If you fold the rear seats up or down, tie down items that could be thrown about the vehicle during a crash or sudden stop. Also, keep all cargo below the bottom of the windows. If it is higher, it could interfere with the proper operation of the side curtain airbags.


Ifequipped Do not use the dual deck cargo shelf with any rear seat folded up or down.


Carrying Cargo


Carrying Cargo in the Cargo Area or on a Roof Rack


Distribute cargo evenly on the floor of the cargo area, placing the heaviest items on the bottom and as far forward as possible. Tie down items that could be thrown about the vehicle during a crash or sudden stop.


Do not stack items higher than the back of the rear seats. They can block your view and be thrown around the vehicle during a crash.


If you carry large items that prevent you from closing the tailgate, exhaust gas can enter the passenger area. To avoid the possibility of poisoning on page 55


, follow the instructions


carbon monoxide


CONTINUED


307


10/07/09 18:49:43 31SWA640_313


Carrying Cargo


If you carry any items on a roof rack, be sure the total weight of the rack and the items does not exceed 165 lbs (75 kg).


If you use an accessory roof rack, the roof rack weight limit may be lower. Refer to the information that came with your roof rack.


308


Optional Separation Net The separation net can be used to hold back soft, lightweight items stored in the cargo area. Heavy items should be properly secured on the floor of the cargo area. The net may not prevent heavy items from being thrown forward in a crash or a sudden stop.


Carrying Cargo on the Dual Deck Cargo Shelf Ifequipped


U.S.modelisshown.


Do not put any items on the dual deck cargo shelf that could block your view or be thrown around the vehicle during a crash.


Do not use the dual deck cargo shelf if the rear seats are folded down.


Do not exceed the dual deck cargo shelf load limit of 20 lbs on U.S. models, and 10 kg on Canadian models.


10/07/09 18:49:49 31SWA640_314


Cargo Hooks


HOOKS


The four hooks on the floor can be used to install a net for securing items.


Ifequipped Your vehicle also has cargo hooks on the side panel in the cargo area. They are designed to hold light items. Heavy objects may damage the hook. Make sure any items put on each hook weigh less than 6.5 lbs (3 kg).


Carrying Cargo


309


10/07/09 18:49:51 31SWA640_315


310


10/07/09 18:49:55 31SWA640_316


Driving


This section gives you tips on starting the engine under various conditions, and how to operate the automatic transmission. It also includes important information on parking your vehicle, the braking system, the vehicle stability assist (VSA ) system, the tire pressure monitoring system (TPMS), and facts you need if you are planning to tow a trailer or drive off-highway.


Driving Guidelines ........................ Preparing to Drive ........................ Starting the Engine ....................... Automatic Transmission .............. Parking ........................................... Braking System ............................. Anti-lock Brakes (ABS) ............... Vehicle Stability Assist (VSA ),


. 312
. 313
. 314
. 315
. 320
. 321
. 322


aka Electronic Stability


Control (ESC), System


........ Tire Pressure Monitoring System ...................................... ...........................


Towing a Trailer Towing Your Vehicle Behind a


(TPMS)


. 324


. 326
. 329


Motorhome


................................


. 334


Off-Highway Driving


Guidelines


..................................


. 336


311


10/07/09 18:50:03 31SWA640_317


Driving Guidelines


Your vehicle has higher ground clearance that allows you to travel over bumps, obstacles, and rough terrain. It also provides good visibility so you can anticipate problems earlier.


Because your vehicle rides higher off the ground, it has a high center of gravity that can cause it to roll over if you make abrupt turns. Utility vehicles have a significantly higher roll over rate than other types of vehicles.


To prevent rollovers or loss of control:


Take corners at slower speeds than you would with a passenger vehicle.


Avoid sharp turns and abrupt maneuvers whenever possible.


312


Do not modify your vehicle in any way that would raise the center of gravity.


Do not carry heavy cargo on the roof.


Four-wheeldrivemodels Your vehicle is equipped with a four- wheel drive (4WD) system. When the system senses a loss of front- wheel traction, it automatically transfers some power to the rear wheels. This gives you better traction and mobility.


You still need to exercise the same care when accelerating, steering, and braking that you would in a two- wheel drive vehicle.


Seepage foroff-highwaydriving guidelines.


336


10/07/09 18:50:13 31SWA640_318


You should do the following checks and adjustments before you drive your vehicle.


1.


Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.


2.


Check that the hood is fully closed.


3.


4.


Visually check the tires. If a tire looks low, use a gauge to check its pressure.


Check that any items you may be carrying are stored properly or fastened down securely.


5.


6.


Check the seat adjustment (see pages


and


97


98


).


Check the adjustment of the inside and outside mirrors (see page


114


).


7.


Check the steering wheel adjustment (see page 81


).


8.


9.


10.


Make sure the doors and the tailgate are securely closed and locked.


Fasten your seat belt. Check that your passengers have fastened ). their seat belts (see page


15


When you start the engine, check the gauges and indicators in the instrument panel (see pages 61
68


to


).


Preparing to Drive


313


10/07/09 18:50:19 31SWA640_319


Starting the Engine


1.


Apply the parking brake.


4.


2.


In cold weather, turn off all electrical accessories to reduce the drain on the battery.


3.


Make sure the shift lever is in Park. Press on the brake pedal.


Without touching the accelerator pedal, turn the ignition key to the START (III) position. Do not hold the key in the START (III) position for more than 15 seconds at a time. If the engine does not start right away, pause for at least 10 seconds before trying again.


The engine is harder to start in cold weather. Also, the thinner air f ound at altitudes above 8,000 f eet (2,400
meters) adds to this problem.


The immobilizer system protects your vehicle f rom thef t. If an improperly- coded key (or other device) is used, the engine’s f uel system is disabled. For more inf ormation, see page


83


314


10/07/09 18:50:26 31SWA640_320


Shift Lever Position Indicators


U.S. model is shown.


These indicators on the instrument panel show which position the shift lever is in.


The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it flashes while driving (in any shift position), it indicates a possible problem in the transmission.


If the malfunction indicator lamp comes on along with the ‘‘D’’ indicator, there is a problem with the automatic transmission control system. Avoid rapid acceleration, and have the transmission checked by your dealer as soon as possible.


Automatic Transmission


Shifting


RELEASE BUTTON


SHIFT LEVER


To shift from any position, press firmly on the brake pedal and the release button on the side of the shift lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) or ACCESSORY (I) position.


CONTINUED


315



Press the brake


Reverse (R) pedal and the release button on the side of the shift lever to shift from Park to reverse. To shift from reverse to neutral, come to a complete stop and then shift. Press the release button before shifting into reverse from neutral.


10/07/09 18:50:32 31SWA640_321


Automatic Transmission


To shift from:


Do this:


Press the brake pedal and press the shift lever release button.


Press the shift lever release button.


Move the shift lever.


Press the D3 button.


P to R


R to P N to R D to 2
2 to 1
1 to 2
2 to D D to N N to D R to N D3 to D D to D3


316



This position mechani-


Park (P) cally locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. Press the release button on the side of the shift lever to move it.


If you have done all of the above and still cannot move the lever out of Park, see on page 319


Shift Lock Release


To avoid transmission damage, come to a complete stop before shifting into Park. You must also press the release button to shift into Park. The shift lever must be in Park before you can remove the key from the ignition switch.


10/07/09 18:50:39 31SWA640_322



Use neutral if you


Neutral (N) need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Shift to the Park

Loading...
x