2009 Honda Civic Coupe Owners Manual

201

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１０：５４　３１ＳＶＡ６３０　０２０７　

iPod Error Messages (Models with navigation system)

If you see an error message on the screen while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.

Error Message

Solution

UNSUPPORTED

NO SONG

Appears when an unsupported iPod is inserted. There is no music information.

202

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１０：５９　３１ＳＶＡ６３０　０２０８　

Playing a USB Flash Memory Device (Models with navigation system)

USB ICON

POWER/VOLUME KNOB

MP3 INDICATOR

AUDIO BUTTON

SCAN BUTTON

TUNE BAR

RPT (REPEAT) BUTTON

RDM (RANDOM) BUTTON

FAST FORWARD BUTTON

SKIP

＋

BUTTON

REWIND BUTTON TUNE BAR

SKIP

−

BUTTON

U.S. model is shown.

JOYSTICK

TRACK LIST ICON

SOUND ICON

203

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１１：０６　３１ＳＶＡ６３０　０２０９　

Playing a USB Flash Memory Device (Models with navigation system)

To select the USB mode without using the icon, press the CD/XM button repeatedly. The status bar appears on the bottom of the screen.

The recommended USB flash memory devices are 256 Mbyte or higher. Some digital audio players may be compatible as well.

Some USB flash memory device (such as devices with security lock- out features, etc.) will not work in this audio unit.

＊

The audio system reads and plays the audio files on the USB flash memory device in MP3, WMA or AAC formats. Depending on the format, the display shows MP3, WMA or AAC when a USB flash memory device is playing. The USB flash memory device limit is up to 700 folders or up to 65535 files.

＊

Only AAC format files recorded with iTunes are playable on this audio unit.

To Play a USB Flash Memory Device This audio system can select and play the audio files from a USB flash memory device with the same controls used for the in-dash disc player. To play a USB flash memory device, connect it to the USB adapter cable in the console compartment. The ignition switch must be in the ACCESSORY (I) or ON (II) position. Press the AUDIO button beside the screen to show the audio display and touch the AUX icon.

You can also select an icon by moving the joystick. Move it to left, right, up, or down to change the highlighting and scroll through lists, then press ENT on the top of the joystick to set your selection.

204

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１１：１９　３１ＳＶＡ６３０　０２１０　

Playing a USB Flash Memory Device (Models with navigation system)

Depending on the type and number of files, it may take some time before they begin to play.

Depending on the software the files were made with, it may not be possible to play some files, or display some text data.

VoiceControlSystem You can select the AUX mode by using the navigation system voice control buttons, but cannot operate the play mode functions.

NOTE:

Do not use a device such as a card reader or hard drive as the device or your files may be damaged.

Do not connect your USB flash memory device using a hub.

Do not use an extension cable to the USB adapter cable equipped with your vehicle.

Do not keep the USB flash memory device in the vehicle. Direct sunlight and high heat will damage it.

We recommend backing up your data before playing a USB flash memory device.

−

The specifications for compatible MP3 files are: −

Sampling frequency: 32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2) Bitrate: 32/40/48/56/64/80/96/112/128/ 160/192/224/256/320/VBR kbps (MPEG1) Supported standards: MPEG1 Audio Layer3
MPEG2 Audio Layer3
Partition: Top partition only Maximum layers: 8

− −

−

CONTINUED

205

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１１：３２　３１ＳＶＡ６３０　０２１１　

Playing a USB Flash Memory Device (Models with navigation system)

Even if recorded in MP3, WMA or AAC format, a file with an unsupported version cannot be played. If the system finds an unsupported file, the screen displays UNSUPPORTED, and then skips to the next file.

In WMA or AAC format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, the screen displays UNPLAYABLE FILE, and then skips to the next file.

ConnectingaUSBFlashMemory Device

USB CONNECTOR

CABLE

1.

Pull out the USB connector from the holder and remove the cable from the clip in the console compartment.

−

The specifications for compatible WMA files are: −

Sampling frequency: 32/44.1/48 kHz Bitrate: 48 320/VBR kbps (Max 384) Supported standards: WMA version 7/8/9
Partition: Top partition only Maximum layers: 8

− −

−

−

−

The specifications for compatible AAC files are: −

Sampling frequency: 8/11.025/12/16/22.05/24/32/ 44.1/48 kHz Bitrate: 48
Supported standards: MPEG4/AAC LC MPEG2/AAC LC Partition: Top partition only Maximum layers: 8

320 kbps

− −

−

−

206

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１１：４１　３１ＳＶＡ６３０　０２１２　

Playing a USB Flash Memory Device (Models with navigation system)

ToChangeorSelectFiles

USB ADAPTER CABLE

2.

Connect the USB flash memory device to the USB adapter cable correctly and securely.

When the USB device is connected and the audio display is selected on the screen by pressing the AUDIO button, the AUX icon switches to the USB icon. The display also shows the folder and file numbers, and the elapsed time.

AUDIO INFO ICON

On the map screen, you can see the audio information whenever you touch the AUDIO INFO icon on the lower part of the screen.

PRESET BUTTONS

U.S. model is shown. Use the preset buttons while a USB flash memory device is playing to select passages and change files. Each preset button’s function is shown on the bottom of the screen.

CONTINUED

207

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１１：４８　３１ＳＶＡ６３０　０２１３　

Playing a USB Flash Memory Device (Models with navigation system)

−

To

FOLDER SELECTION select a different folder, press either side of the TUNE bar. Press the

side to skip to the next folder, side to skip to the

and press the beginning of the previous folder.

▼

▲

ToSelectaFilefromFolderandFile Lists

TRACK LIST ICON

U.S. model is shown.

You can also select a folder and file from the lists shown on the screen. Press the AUDIO button to show the audio display on the navigation screen.

−

Each time you press and (preset 6), the player

SKIP release skips forward to the beginning of the next file. Press and release

(preset 5), to skip backward to

the beginning of the current file. Press it again to skip to the beginning of the previous file.

−

FF/REW a file, press and hold or

(preset 3).

To move rapidly within (preset 4)

208

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１１：５６　３１ＳＶＡ６３０　０２１４　

Playing a USB Flash Memory Device (Models with navigation system)

FOLDER ICON

Touch the Track List icon to switch the display to the folder list, then select and touch a desired folder.

FOLDER ICON

The display changes to the file list. Then, select and touch a desired file.

Touch the folder icon on the upper left of the screen to move to the parent folder.

or

▲ ▼

To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon.

To select a desired icon with the joystick, move it in the appropriate direction, then press ENT.

Press the AUDIO button to go back to the normal audio playing display. Pressing the CANCEL button goes back to the previous screen, and pressing the MAP button cancels the audio display on the screen.

CONTINUED

209

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１２：０２　３１ＳＶＡ６３０　０２１５　

Playing a USB Flash Memory Device (Models with navigation system)

Press and hold the button until you hear a beep to turn off either repeat mode. Pressing either side of the TUNE bar also turns off this feature.

U.S. model is shown.

−

This feature

FOLDER REPEAT replays all the tracks/files in the selected folder in the order they are stored. To activate folder repeat, press and hold the RPT button (preset 1) until you see FOLDER REPEAT in the display.

ToSelectRepeat,RandomorScan Mode: You can select any type of repeat, random and scan modes with the RPT, RDM and SCAN buttons. To confirm the selected mode, press the AUDIO button to show the audio control display on the navigation screen.

−

TRACK REPEAT This feature continuously plays a track/file. To activate track repeat, press and release the RPT button (preset 1). You will see TRACK REPEAT in the display.

210

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１２：０８　３１ＳＶＡ６３０　０２１６　

Playing a USB Flash Memory Device (Models with navigation system)

−

TRACK RANDOM This feature plays all the tracks/files in random order. To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display.

−

This

FOLDER RANDOM feature plays the tracks/files in the selected folder in random order. To activate folder random, press and hold the RDM button (preset 2) until you see FOLDER RANDOM in the display.

Press and hold the button until you hear a beep to turn off either random mode.

−

This feature

TRACK SCAN samples all tracks/files in the selected folder in the order they are stored. To activate track scan, press and release the SCAN button. You will see SCAN in the display. You will get a 10 second sampling of each track/file in the folder.

−

FOLDER-SCAN This feature samples the first track/file in each folder in the order they are stored. To activate folder scan, press and hold the SCAN button until you see F-SCAN in the display. You will get a 10 second sampling of each first track/file in the folder(s).

Press and hold the button until you hear a beep to turn off either scan mode. Pressing either SKIP button also turns off this feature.

211

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１２：１６　３１ＳＶＡ６３０　０２１７　

Playing a USB Flash Memory Device (Models with navigation system)

USB Flash Memory Device Error Messages If you see an error message in the screen, see page

213

DisconnectingaUSBFlashMemory Device You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Make sure to follow the USB flash memory device’s instructions when you remove it.

When you disconnect the USB flash memory device while it is playing, the audio display (if selected) shows NO DATA.

If you reconnect the same USB flash memory device, the system will begin playing where it left off.

＊

To Stop Playing a USB Flash Memory Device To play the radio, press the AM/FM button or touch the FM1, FM2, AM, XM1 , or XM2 icon. Press the CD icon to switch to the disc mode (if a disc is loaded). Each time you press the CD/XM button, the audio mode switches between the USB, disc and XM radio .

＊

＊

＊

If equipped

If a PC card is in the audio unit, touch the CARD icon to play the PC card.

212

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１２：２１　３１ＳＶＡ６３０　０２１８　

USB Flash Memory Device Error Messages (Models with navigation system)

If you see an error message on the screen while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.

Error Message

Solution

UNPLAYABLE FILE

UNSUPPORTED

NO SONG

The system cannot read the file(s). Check the files in the USB flash memory device. There is a possibility that the files have been damaged. Appears when the unsupported USB flash memory device is inserted. There is no music information.

213

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１２：２９　３１ＳＶＡ６３０　０２１９　

AM/FM Radio Reception

Radio Frequencies The radio can receive the complete AM and FM bands. Those bands cover these frequen- cies:

AM band: 530 to 1,710 kHz FM band: 87.7 to 107.9 MHz

Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 MHz apart (87.9, 88.1, 88.3).

Stations must use these exact frequencies. It is fairly common for stations to round-off the frequency in their advertising, so your radio could display a frequency of 100.9 even though the announcer may identify the station as ‘‘FM101.’’

214

Radio Reception How well the radio receives stations is dependent on many factors, such as the distance from the station’s transmitter, nearby large objects, and atmospheric conditions.

A radio station’s signal gets weaker as you get farther away from its transmitter. If you are listening to an AM station, you will notice the sound volume becoming weaker, and the station drifting in and out. If you are listening to an FM station, you will see the stereo indicator flickering off and on as the signal weakens. Eventually, the stereo indicator will go off and the sound will fade completely as you get out of range of the station’s signal.

Driving very near the transmitter of a station that is broadcasting on a frequency close to the frequency of the station you are listening to can also affect your radio’s reception. You may temporarily hear both stations, or hear only the station you are close to.

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１２：３５　３１ＳＶＡ６３０　０２２０　

Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your radio then receives both the direct signal from the station’s transmitter, and the deflected signal. This causes the sound to distort or flutter. This is a main cause of poor radio reception in city driving.

Radio reception can be affected by atmospheric conditions such as thunderstorms, high humidity, and even sunspots. You may be able to receive a distant radio station one day and not receive it the next day because of a change in conditions.

AM/FM Radio Reception

Electrical interference from passing vehicles and stationary sources can cause temporary reception problems.

AsrequiredbytheFCC: Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.

215

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１２：４４　３１ＳＶＡ６３０　０２２１　

Protecting Your Discs

General Information

When using CD-R or CD-RW discs, use only high quality discs labeled for audio use.

When recording a CD-R or CD-RW, the recording must be closed for it to be used by the system.

Play only standard round discs. Odd-shaped discs may jam in the drive or cause other problems.

Handle your discs properly to prevent damage and skipping.

Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.

216

Protecting Discs When a disc is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep discs out of direct sunlight and extreme heat.

To clean a disc, use a clean soft cloth. Wipe across the disc from the center to the outside edge.

A new disc may be rough on the inner and outer edges. The small plastic pieces causing this roughness can flake off and fall on the recording surface of the disc, causing skipping or other problems. Remove these pieces by rubbing the inner and outer edges with the side of a pencil or pen.

Never try to insert foreign objects in the system or the magazine.

Handle a disc by its edges; never touch either surface. Do not place stabilizer rings or labels on the disc. These, along with contamination from fingerprints, liquids, and felt-tip pens, can cause the disc to not play properly, or possibly jam in the drive.

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１２：５５　３１ＳＶＡ６３０　０２２２　

Additional Information on Recommended Discs The in-dash disc player/changer has a sophisticated and delicate mechanism. If you insert a damaged disc as indicated in this section, it may become stuck inside and damage the audio unit.

Examples of these discs are shown to the right:

Protecting Your Discs

1.

Bubbled, wrinkled, labeled, and excessively thick discs

Bubbled/ Wrinkled

With Label/ Sticker

Using Printer Label Kit

Sealed

With Plastic Ring

2.

Damaged discs

3.

Poor quality discs

Chipped/ Cracked

Warped

Burrs

CONTINUED

217

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１３：０７　３１ＳＶＡ６３０　０２２３　

Protecting Your Discs

4.

Small, irregular shaped discs

5.

Discs with scratches, dirty discs

Recommended discs are printed with the following logo.

Fingerprints, scratches, etc.

CD-R or CD-RW may not play due to the recording conditions.

Scratches and fingerprints on the discs may cause the sound to skip.

Audio unit may not play the following formats.

This audio unit cannot play a Dual- disc .

3-inch (8-cm) CD

Triangle Shape

Can Shape

Arrow Shape

218

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１３：１７　３１ＳＶＡ６３０　０２２４　

CH BUTTON

MODE BUTTON

VOL BUTTON

Ifequipped Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel.

▲

) or down (

The VOL button adjusts the volume up ( ). Press the top or bottom of the button, hold it until the desired volume is reached, then release it.

▼

The MODE button changes the mode. Pressing the button repeatedly selects FM1, FM2, AM, disc (if a disc is loaded), or a PC card (if it is loaded). On models with satellite radio system, you can also select XM radio.

If an iPod or a USB flash memory device is plugged into the system, you can also select AUX.

＋

) of the button, the system

If you are listening to the radio, use the CH button to change stations. Each time you press and release the top ( goes to the next preset station on the band you are listening to. Press and release the bottom ( ) to go back to the previous station.

−

Remote Audio Controls

＋

To activate the seek function, press and hold the top ( ) or bottom ( − of the CH button until you hear a beep. The system searches up or down from the current frequency to find a station with a strong signal.

If you are playing a disc, the system skips to the beginning of the next track (file in MP3 or WMA format) each time you press the top ( ) of ＋ the CH button. Press the bottom ) to return to the beginning of the − current track or file. Press it twice to return to the previous track or file.

You will see the track/file number and the elapsed time. If the disc has text data or is compressed in MP3 or WMA, you can also see any other information (track title, file name, folder name, etc.).

CONTINUED

219

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１３：２５　３１ＳＶＡ６３０　０２２５　

Remote Audio Controls, Auxiliary Input Jack

＋

) of the CH button to

If you are playing a PC card, press the top ( advance to the next file. Press the bottom ( previous file.

) to go back to the

−

In MP3 or WMA mode, you can use the seek function to select folders. Press and hold the top ( ) of the CH button until you hear a beep, to skip forward to the first file of the next folder. Press the bottom ( ) to − skip backward to the previous folder.

＋

If you are playing a USB flash memory device or iPod with the USB adapter cable (if equipped), press and release the top ( ) of the CH button to skip forward to the beginning of the next file. Press the bottom ( ) to skip backward to the beginning to the current file. Press it twice to return to the previous file.

＋

−

When playing a USB flash memory device, you can also use the seek function to skip the folder. To activate this, press and hold either side of the CH button until you hear a beep.

Auxiliary Input Jack

AUXILIARY INPUT JACK

Ifequipped The auxiliary input jack is underneath the accessory power socket on the front panel. The system will accept auxiliary input from standard audio accessories.

When a compatible audio unit is connected to the jack, press the AUX button (AUX icon on models with navigation system) to select it.

220

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１３：３１　３１ＳＶＡ６３０　０２２６　

Onmodelswithaudiosystem Your vehicle’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific code using the preset buttons (icon on vehicle’s with navigation system). Because there are hundreds of number combinations possible from specific digits, making the system work without knowing the exact code is nearly impossible.

You should have received a card that lists your audio system’s code and serial numbers. It is best to store this card in a safe place at home. In addition, you should write the audio system’s serial number in this owner’s manual.

If you lose the card, you must obtain the code number from a dealer. To do this, you will need the system’s serial number.

If your vehicle’s battery is disconnected or goes dead, or the radio fuse is removed, the audio system will disable itself. If this happens, you will see ‘‘ENTER CODE’’ in the frequency display the next time you turn on the system. Use the preset buttons (icons on vehicles with navigation system) to enter the code. The code is on the radio code card included in your owner’s manual kit. When it is entered correctly, the radio will start playing.

If you make a mistake entering the code, do not start over; complete the sequence, then enter the correct code. You have 10 tries to enter the correct code. If you are unsuccessful in 10 attempts, you must then leave the system on for 1 hour before trying again.

Radio Theft Protection

The system will retain your AM and FM presets even if power is disconnected.

221

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１３：４１　３１ＳＶＡ６３０　０２２７　

Setting the Clock

Onmodelswithoutnavigationsystem To set the time, press the CLOCK (AM/FM) button until the displayed time begins to blink, then release the button.

Change the hours by pressing the H (preset 1) button until the numbers advance to the desired time. Change the minutes by pressing the M (preset 2) button until the numbers advance to the desired time.

Press the CLOCK (AM/FM) button again to enter the set time.

You can quickly set the time to the nearest hour. If the displayed time is before the half hour, pressing the CLOCK (AM/FM) button until you hear a beep, then pressing the R (preset 3) button sets the clock back to the previous hour. If the displayed time is after the half hour, the clock sets forward to the beginning of the next hour.

222

U.S. LX, and Canadian DX, DX-G and LX models

CLOCK BUTTON

EX, EX-L and Si models

CLOCK BUTTON

H (HOUR) BUTTON

R (RESET) BUTTON

M (MINUTE) BUTTON

H (HOUR) BUTTON

R (RESET) BUTTON

M (MINUTE) BUTTON

For example:

1:06 will reset to 1:00
1:52 will reset to 2:00

Onmodelswithnavigationsystem The navigation system receives signals from the global positioning system (GPS), and the displayed

time is updated automatically by the GPS. Refer to the navigation system manual for how to adjust the time.

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１３：４９　３１ＳＶＡ６３０　０２２８　

Ifequipped The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights, parking lights, side marker lights, and taillights flashes if someone attempts to break into your vehicle or remove the radio. This alarm continues for 2 minutes, then the system resets. To reset an alarming system before the 2
minutes have elapsed, unlock the driver’s door with the key or the remote transmitter.

The security system automatically sets 15 seconds after you lock the doors, hood, and trunk. For the system to activate, you must lock the doors from the outside with the key, lock tab, door lock switch, or remote transmitter. The security system indicator on the instrument panel starts blinking immediately to show you the system is setting itself.

Security System

Except Si

The alarm will sound if the trunk lock is forced, or the trunk is opened with the trunk release handle or the emergency trunk opener.

Si

SECURITY SYSTEM INDICATOR

Once the security system is set, opening either door without using the key or the remote transmitter, the hood, or the trunk will cause the system to alarm. It also alarms if the audio unit is removed from the dashboard or the wiring is cut.

With the system set, you can still open the trunk with the master key (U.S. LX model) or the remote transmitter (U.S. EX, EX-L and Si models) without triggering the alarm.

The security system will not set if the hood, trunk, or either door is not fully closed. If the system will not set, turn the ignition switch to the ON (II) position, and check the indicators on the instrument panel. Close either door or the trunk indicated on the display. Check the hood visually since it is not part of the display, and shut it if necessary.

Use the remote transmitter NOTE: to quickly check that the hood, the trunk, and both doors are closed. Push the lock button twice within 5
seconds. There should be an audible confirmation beep.

Do not attempt to alter this system or add other devices to it.

223

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１３：５８　３１ＳＶＡ６３０　０２２９　

Cruise Control

Ifequipped Cruise control allows you to maintain a set speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. It should be used for cruising on straight, open highways. It is not recommended for city driving, winding roads, slippery roads, heavy rain, or bad weather.

Improper use of the cruise control can lead to a crash.

Use the cruise control only when traveling on open highways in good weather.

224

Using Cruise Control

CRUISE BUTTON

RES/ACCEL

SET/DECEL

CANCEL BUTTON

1.

Push the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on.

The cruise control system can be left on, even when it is not in use.

2.

Accelerate to the desired cruising speed above 25 mph (40 km/h).

3.

Press and release the SET/ DECEL button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated.

Cruise control may not hold the set speed when you are going up and down hills. If your vehicle speed increases going down a hill, use the brakes to slow down. This will cancel the cruise control. To resume the set speed, press the RES/ACCEL button. The CRUISE CONTROL indicator on the instrument panel will come back on.

When climbing a steep hill, the automatic transmission may downshift to hold the set speed.

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１４：０７　３１ＳＶＡ６３０　０２３０　

Changing the Set Speed You can increase the set cruising speed in any of these ways:

Press and hold the RES/ACCEL button. When you reach the desired cruising speed, release the button.

Push on the accelerator pedal until you reach the desired cruising speed, then press the SET/ DECEL button.

To increase the speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, your vehicle speeds up about 1 mph (1.6 km/h).

You can decrease the set cruising speed in any of these ways:

Press and hold the SET/DECEL button. Release the button when you reach the desired speed.

To slow down in very small amounts, tap the SET/DECEL button. Each time you do this, your vehicle will slow down about 1 mph (1.6 km/h).

Tap the brake or clutch pedal lightly with your foot. The CRUISE CONTROL indicator on the instrument panel goes out. When the vehicle slows to the desired speed, press the SET/ DECEL button.

Cruise Control

Even with the cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set cruising speed.

Resting your foot on the brake or clutch pedal causes the cruise control to cancel.

225

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１４：１３　３１ＳＶＡ６３０　０２３１　

Cruise Control

Cancelling Cruise Control You can cancel cruise control in any of these ways:

Tap the brake or clutch pedal.

Push the CANCEL button on the steering wheel.

Push the CRUISE button on the steering wheel.

Resuming the Set Speed When you push the CANCEL button, or tap the brake or clutch pedal, the system remembers the previously set cruising speed. To return to that speed, accelerate to above 25 mph (40 km/h) and then press and release the RES/ACCEL button. The CRUISE CONTROL indicator comes on, and the vehicle accelerates to the same cruising speed as before.

Pressing the CRUISE button turns the system off and erases the previous cruising speed.

226

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１４：２１　３１ＳＶＡ６３０　０２３２　

Onmodelswithnavigationsystem Your vehicle is equipped with the Bluetooth HandsFreeLink (HFL). HFL uses Bluetooth technology to link your cell phone to your vehicle. With HFL, you can place and receive calls through your vehicle’s audio system, without the distraction of handling your cell phone. To use this feature, you need a Bluetooth- compatible cell phone with the Hands Free Profile. For more information, and a list of compatible cell phones, visit handsfreelink.honda. com Canada, visit (888) 9-HONDA-9.

, or call (888) 528-7876. In

www.honda.ca

, or call

The HFL is available in English on U.S. models, and in both English and French on Canadian models. To change the language, see page 261
The voice of HFL is set to female.

Here are the main features of HFL. Instructions for using HFL begin on page

231

Voice Control HFL HFL recognizes simple voice commands, such as phone numbers and names. It uses these commands to automatically dial, receive, and store numbers. For more information on voice control, see Using Voice Control on page 231

Bluetooth Wireless Technology The Bluetooth name and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honda Motor Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

Bluetooth HandsFreeLink

Bluetooth is the wireless technology that links your phone to HFL. HFL uses a Class 2 Bluetooth, which means the maximum range between your phone and vehicle is 30 feet (10
meters).

To use HFL, your phone must have approved Bluetooth capability along with the Hands Free Profile. This type of phone is available through many phone makers and cellular carriers. You can also find an approved phone by visiting handsfreelink.honda.com the HandsFreeLink consumer support at (888) 528-7876. In Canada, visit HONDA-9.

, or call (888) 9-

, or by calling

www.honda.ca

227

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１４：３０　３１ＳＶＡ６３０　０２３３　

Bluetooth HandsFreeLink

Incoming/Outgoing Calls With a linked phone, HFL allows you to send and receive calls in your vehicle without holding the phone.

Help Assistance The HFL system has a help function to provide instructions for pairing a phone, or give hints on how to operate HFL properly. If your response or command is not correct, or the system cannot recognize a command, the HFL system will give you an appropriate command or play the help prompt.

228

Phonebook HFL can store up to 50 names and phone numbers in its phonebook. With a linked phone, you can then automatically dial any name or number in the phonebook.

You can also store the desired number to the HFL phonebook directly from your cell phone using the receive contact function in HFL.

Your vehicle’s HFL system has the cellular phonebook import function. This allows you to import your cellular phonebook to HFL. Using the navigation system, you can make a call directly and store a desired number in HFL from the list shown on the navigation display. For more information on how to import the phonebook, see page 242
make a call, see page

252

. To

Your phone may not have NOTE: phonebook import function. Visit , or call the handsfreelink.honda.com HandsFreeLink consumer support at (888) 528-7876. In Canada, call (888) 9-HONDA-9. You can see your phone’s owner’s manual for information.

Microphone The HFL microphone is on the ceiling, between the spotlights. The microphone is shared with the navigation system.

HFL and the navigation system have separate voice recognition systems. When HFL is in use, a voice command for the navigation system will not be recognized even if you press the navigation Talk button. In this case, you will hear two short beeps, and the HFL system has no prompt.

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１４：３８　３１ＳＶＡ６３０　０２３４　

Audio System When HFL is in use, the sound comes through the vehicle’s front audio system speakers. If the audio system is in use while operating either of the HFL buttons or making a call, HFL overrides the audio system. To change the volume level, use the audio system volume knob or the steering wheel volume controls.

Bluetooth HandsFreeLink

The HFL buttons are used as follows:

HFL Talk: This button is used before you give a command, and to answer incoming calls.

Press and release the button, then wait for a beep before giving a command.

HFL Back: This button is used to end a call, go back to the previous voice control command, and to cancel an operation.

HFL Buttons

HFL TALK BUTTON

NAVI VOICE CONTROL BUTTONS

HFL BACK BUTTON

To operate HFL, use the HFL Talk and Back buttons on the left side of the steering wheel.

Ensure that you use the HFL

NOTE: buttons, not the NAVI buttons, to give HFL voice commands.

229

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１４：４７　３１ＳＶＡ６３０　０２３５　

Bluetooth HandsFreeLink

Information Display

BLUETOOTH INDICATOR

When you are operating HFL, dialing or receiving calls with the audio system in use, you will see the above screen on the navigation display.

HFL MESSAGE

On the map screen, you will see a ‘‘HFL’’ message on the screen.

indicator will also be

displayed on the screen if your phone is linked to HFL.

230

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１４：５８　３１ＳＶＡ６３０　０２３６　

How to Use HFL HFL is operated by the HFL Talk and Back buttons on the left side of the steering wheel. The next few pages provide instructions for all basic features of the HFL.

All phones may not

NOTE: operate identically, and some may cause inconsistent operation of HFL.

Using Voice Control Here are some guidelines for using voice control:

Adjust the airflow from both the dashboard and side vents so they do not blow against the microphone on the ceiling.

Close the windows and the moonroof.

To enter a command, press and release the HFL Talk button. After the beep, say your command in a clear, natural tone.

Lower the A/C fan speed during voice recognition operation.

If the microphone picks up voices other than yours, the system may not interpret your voice commands correctly.

If HFL does not recognize a command, its response is ‘‘Pardon.’’ If it doesn’t recognize the command it plays an appropriate Help prompt. Response time may vary depending on the voice command.

To hear a list of available options at any time, press the HFL Talk button, wait for the beep, and say ‘‘Hands free help,’’ or ‘‘Help.’’

Bluetooth HandsFreeLink

When you are at the main menu, you can hear general HFL information such as pairing or setting up the system. Press the HFL Talk button, wait for the beep, and say ‘‘Tutorial.’’

Many commands can be spoken together. For example, you can say, ‘‘Dial 123-456-7891.’’

To enter a string of numbers in a Call or Dial command, you can say them all at once, or you can separate them in blocks of 3, 4, 7, 10, and 11.

To skip a voice prompt, press the HFL Talk button while HFL is speaking. HFL will then begin listening for your next command.

CONTINUED

231

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１５：０７　３１ＳＶＡ６３０　０２３７　

Bluetooth HandsFreeLink

To go back one step in a command process, say ‘‘Go back,’’ or press the HFL Back button. If nothing is said while HFL is listening for a command, HFL will time out and stop its voice recognition, then prompt you with available options or help information. The next time you press the HFL Talk button, HFL begins listening from the point at which it timed out.

To end a command sequence at any time, press and hold the HFL Back button, or press and release the HFL Talk button, wait for the beep, and say ‘‘Cancel.’’ The next time you press the HFL Talk button, HFL begins from its main menu.

When you finish a command sequence, HFL returns to idle. For example, when you store the name ‘‘Eric,’’ the HFL system response is ‘‘Eric has been stored.’’ The next time you press the HFL Talk button, HFL begins from its main menu.

Pairing Your Phone Your Bluetooth compatible phone with Hands Free Profile must be paired to HFL before you can make and receive hands-free calls. To confirm that your phone is Bluetooth compatible, visit handsfreelink.honda.com 528-7876. In Canada, call (888) 9- HONDA-9. Your phone retailer should also be able to confirm that your phone is Bluetooth compatible.

, or call (888)

NOTE:

HFL does not allow you to pair your phone if the vehicle is moving.

For pairing, your phone must be in its discovery mode (searching for a Bluetooth related device).

Up to six phones can be paired to HFL.

Your phone’s battery may drain faster when it is paired to HFL.

The following procedure works for most phones. If you cannot pair your phone to HFL with this procedure, refer to your phone’s operating manual, visit handsfreelink.honda.com HandsFreeLink consumer support at (888) 528-7876, or call your phone retailer. In Canada, call (888) 9-HONDA-9.

, call the

232

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１５：１７　３１ＳＶＡ６３０　０２３８　

Bluetooth HandsFreeLink

During the pairing process, turn off any previously paired phones before pairing a new phone.

Each time a phone is paired with HFL, the system selects a pairing code randomly or sequentialy. You can switch this setting between random mode and fixed mode. To select a pairing code setting between Random and Fixed, refer to page

238

If after three minutes your phone is not ready to pair or a phone is not found, the system will time out and return to idle.

2.

Topairyourfirstphone,followthe promptsontheHFLsystem: 1.

Park your vehicle. With your phone on and the ignition switch in the ACCESSORY (I) or ON (II) position, press and release the Talk button. HFL prompts ‘‘Welcome to Bluetooth HandsFreeLink. This system enables hands-free usage of a mobile phone. Before using this system, a phone needs to be paired or connected with HandsFreeLink. Would you like to pair a phone now? Press the Bluetooth HandsFreeLink Talk button, and after the beep, say Yes, to begin the pairing process, or No, to continue.’’

Press and release the Talk button. After the beep, if you say ‘‘Yes.’’ HFL responds ‘‘Entering phone set up: pair menu. The pairing process requires operation of your Bluetooth phone. For safety, only perform this function while the vehicle is stopped.’’ HFL responds ‘‘For proper system function a compatible Bluetooth phone is required. Please visit the HandsFreeLink website, listed in the owner’s manual, for a list of approved phones and other system information. HandsFreeLink is waiting to pair with a Bluetooth phone. From your phone, search for Bluetooth devices and select HandsFreeLink.’’ HFL responds ‘‘When prompted by your mobile phone, enter the pairing code: ＊

＜ For example

1234

＞

.’’

＊

Go to Step 4.

CONTINUED

233

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１５：２５　３１ＳＶＡ６３０　０２３９　

6.

4.

5.

Follow the prompts on your phone to get it into its discovery mode. The phone will search for HFL. When it comes up, select HandsFreeLink from the list of options displayed on your phone.

When asked by the phone, enter the four-digit code from step 3 into your phone. HFL responds ‘‘HandsFreeLink has connected to a new phone. A name is needed to identify this phone. Press the Talk button and say a name. For example, John’s phone.’’

Bluetooth HandsFreeLink

Steps 4 and 5 show a

NOTE: common way to get your phone into its discovery mode (searching for a Bluetooth related device). If these steps do not work on your phone, refer to the phone’s operating manual.

3.

Press and release the Talk button. After the beep, if you say No, HFL responds ‘‘Would you like to hear the Bluetooth HandsFreeLink tutorial now? Press the Talk button and after the beep, say yes to begin the tutorial, or say No to exit HandsFreeLink.’’

If you say Yes, HFL will begin the tutorial. Follow the prompts on HFL.

234

＜

Press and release the Talk button. After the beep, say the name you want to use. For example, say ‘‘John’s phone.’’ HFL responds ‘‘ John’s phone has been successfully paired.’’ HFL responds ‘‘Would you like to hear the Bluetooth HandsFreeLink tutorial now? Press the Talk button and after the beep, say Yes to begin the tutorial, or say No to exit HandsFreeLink.’’

＞

If you press and release the Talk button and say ‘‘Yes,’’ HFL begins Tutorial. If you say ‘‘No,’’ HFL returns to idle.

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１５：３６　３１ＳＶＡ６３０　０２４０　

Bluetooth HandsFreeLink

Topairanotherphone,dothis: 1.

With your phone on and the ignition switch in the ACCESSORY (I) or ON (II) position, press and release the Talk button. After the beep, say ‘‘Phone setup.’’ HFL responds ‘‘Phone setup options are pair, edit, delete, list, status, next phone, and set pairing code. Press the Talk button and say a command.’’

2.

Press and release the Talk button. After the beep, say ‘‘Pair.’’

Torenameapairedphone,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ HFL responds ‘‘Phone setup options are pair, edit, delete, list, status, next phone, and set pairing code. Press the Talk button and say a command.’’

2.

Press and release the Talk button. After the beep, say ‘‘Edit.’’ HFL responds ‘‘Which phone would like to edit? Press the Talk button, and say a name, or say List, to hear the names of the paired phones’’

3.

4.

Press and release the Talk button. After the beep, say the name of the phone you want to rename. For example, say ‘‘John’s phone.’’ HFL responds ‘‘What is the new name for John’s phone? Press the Talk button and say a name.’’

Press and release the Talk button. After the beep, say the new name of the phone. For example, say ‘‘Lisa’s phone.’’ HFL responds ‘‘The name has been changed.’’

3.

Repeat steps 2 through 6 on pages 233

and

234

＜

John’s phone

With only one paired phone, for example, , HFL responds ‘‘What is the new name for ＜ step 4.

John’s phone

?’’ Then go to

＞

＞

CONTINUED

235

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１５：４９　３１ＳＶＡ６３０　０２４１　

Bluetooth HandsFreeLink

Todeleteapairedphone,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ HFL responds ‘‘Phone setup options are pair, edit, delete, list, status, next phone, and set pairing code. Press the Talk button and say a command.’’

2.

Press and release the Talk button. After the beep, say ‘‘Delete.’’ HFL responds ‘‘Which phone would like to delete? Press the Talk button and say a name, or say list, to hear the names of the paired phone.’’

＜

John’s phone

With only one paired phone, for example, , HFL responds ‘‘Would you like to delete ＜ step 4.

John’s phone ?’’ Then go to

＞

＞

236

Tolistallpairedphones,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ HFL responds ‘‘Phone setup options are pair, edit, delete, list, status, next phone, and set pairing code. Press the Talk button and say a command.’’

2.

Press and release the Talk button. After the beep, say ‘‘List.’’ HFL responds by listing the name of each paired phone. When all phones paired to the system have been read, HFL responds ‘‘The entire list has been read.’’

3.

4.

5.

Press and release the Talk button. After the beep, say the name of the phone you want to delete. For example, say ‘‘John’s phone.’’ HFL responds ‘‘Would you like to delete John’s phone? Press the Talk button and say Yes or No.’’

Press and release the Talk button. After the beep, say ‘‘Yes.’’ HFL responds ‘‘Preparing to delete John’s phone. Press the Talk button and say Continue; otherwise say Go Back or Cancel.’’

Press and release the Talk button. After the beep, if you say ‘‘Continue.’’ HFL responds ‘‘The phone has been deleted.’’ ‘‘Go back’’ or ‘‘Cancel’’ does not delete the phone.

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１５：５８　３１ＳＶＡ６３０　０２４２　

Bluetooth HandsFreeLink

Tofindoutthestatusofthephonebeing used,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ HFL responds ‘‘Phone setup options are pair, edit, delete, list, status, next phone, and set pairing code. Press the Talk button and say a command.’’

Tochangefromthecurrentlylinked phonetoanotherpairedphone,dothis: Press and release the Talk button. 1. After the beep, say ‘‘Phone setup.’’ HFL responds ‘‘Phone setup options are pair, edit, delete, list, status, next phone, and set pairing code. Press the Talk button and say a command.’’

2.

Press and release the Talk button. After the beep, say ‘‘Status.’’ For example, HFL responds ‘‘John’s phone is linked. Battery strength is three bars. Signal strength is five bars, and the phone is roaming.’’

Some Phones may not send the status information to the HFL system.

2.

Press and release the Talk button. After the beep, say ‘‘Next phone.’’ HFL responds ‘‘Searching for the next phone.’’ The system then disconnects the linked phone and searches for another paired phone. If the system finds it, for example, HFL responds ‘‘Paul’s phone is linked.’’

If no other phones are found or paired, the first phone remains linked. For example, HFL responds ‘‘No other paired phones were found/have been paired. Returning to ＞

John’s phone .’’

＜

CONTINUED

237

2009 Civic Coupe Table Of ContentsMain Menu０８／０７／０８　１１：１６：０８　３１ＳＶＡ６３０　０２４３　

Bluetooth HandsFreeLink

SettingaPairingCode When you pair your phone to HFL, the HFL system will automatically select a pairing code at random or in order. You can customize this setting mode between Random and Fixed. If you select the fixed mode, the HFL system will select a pairing code sequentially.

Tochangethesettingmode,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ HFL responds ‘‘Phone setup options are pair, edit, delete, list, status, next phone, and set pairing code. Press the Talk button and say a command.’’

238

2.

Press and release the Talk button. After the beep, say ‘‘Set Pairing Code.’’ HFL responds ‘‘Each time a phone is paired with HandsFreeLink, a pairing code is used for security. This code can be randomly generated by HandsFreeLink, or fixed, which is needed for some Bluetooth devices with a preset pairing code. Would you like to set the pairing code as Random or Fixed?’’

3.

Press and release the Talk button. After the beep, to select the fixed mode, say ‘‘Fixed.’’ HFL responds ‘‘What is the four- digit number you would like to see as the pairing code? Press the Talk button and say the number.’’

4.

5.

Press and release the Talk button. After the beep, say a desired four- digit number. For example, say