2013 Honda Accord Sedan Owners Manual

of you gets too close.

On*1/Off

ACC Display Speed Unit *

Changes the speed unit for ACC on the multi- information display *.

mph*1/km/h

Language Selection *

Changes the displayed language on the multi- information display *.

English*1/French/ Spanish

Vehicle Settings

Adjust Outside Temp. Display

Adjust the temperature reading by a few degrees.

-5°F ~ ±0°F*1 ~ +5°F (U.S.) -3°C ~ ±0°C*1 ~ +3°C (Canada)

Meter Setup

“Trip A” Reset Timing

“Trip B” Reset Timing

Changes the setting of how to reset trip meter A, average fuel economy A, average speed A *, and elapsed time A *.

With Refuel/IGN Off/ Manually Reset*1

Changes the setting of how to reset trip meter B, average fuel economy B, average speed B *, and elapsed time B *.

With Refuel/IGN Off/ Manually Reset*1

Fuel Efficiency Backlight

Turns the ambient meter feature on and off.

On*1/Off

Keyless Start Guidance Screens

Displays the push button start guidance when conditions are met to change power mode.

On*1/Off

* Not available on all models

Index

Home

326

*1:Default Setting

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 327 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uuCustomized Featuresu

Setup Group

Vehicle Settings

Driving Position Setup*

Keyless Access Setup

Customizable Features

Description

Selectable Settings

Memory Position Link

Changes the driver’s seat position to a stored setting.

On*1/Off

Door Unlock Mode

Changes which doors unlock when you grab the driver’s door handle.

Drivers Door Only*1/ All Doors

Keyless Access Light Flash

Keyless Access Beep

Causes some exterior lights to blink when you unlock/lock the doors.

Causes the beeper to sound when you unlock/ lock the doors.

Interior Light Dimming Time

Changes the length of time the interior lights stay on after you close the doors.

Lighting Setup

Headlight Auto Off Timer

Changes the length of time the exterior lights stay on after you close the driver's door.

On*1/Off

On*1/Off

60seconds/ 30seconds*1/ 15seconds

60seconds/ 30seconds/ 15seconds*1/ 0seconds

QRG

TOC

Auto Light Sensitivity

Changes the timing for the headlights to come on.

Max/High/Mid*1/ Low/Min

*1:Default Setting

* Not available on all models

Index

Home

Continued

327

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 328 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uuCustomized Featuresu

QRG

TOC

Setup Group

Vehicle Settings

*1:Default Setting

Index

Home

328

Door Setup

Mainte- nance Info.

Default

Customizable Features

Description

Selectable Settings

Auto Door Lock

Changes the setting for the automatic locking feature.

With Vehicle Speed*1/ Shift from P/Off

Auto Door Unlock

Changes the setting for when the doors unlock automatically.

All Doors When Driver’s Door Opens*1/ All Doors When Shifted to Park/All Doors When Ignition Switched Off/Off

Key And Remote Unlock Mode

Sets up either the driver's door or all doors to unlock on the first push of the remote.

Driver Door*1/All Doors

Keyless Lock Answer Back

LOCK/UNLOCK- The exterior lights flash. LOCK (2nd push)- The beeper sounds.

On*1/Off

Security Relock Timer

Changes the time it takes for the doors to relock and the security system to set after you unlock the vehicle without opening any door.

90seconds/ 60seconds/ 30seconds*1

Maintenance Reset

Resets the engine oil life display when you have performed the maintenance service.

—

Cancels/Resets all customized items in the Vehicle Settings group as default.

Default/OK

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 329 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uuCustomized Featuresu

Setup Group

Customizable Features

Description

Selectable Settings

Show with Turn Signal

Selects whether the LaneWatch display comes on when you move the turn signal lever to the passenger side.

On*1/Off

Reference Lines

Selects whether the reference lines come on on the LaneWatch monitor.

On*1/Off

Next Maneuver Pop up

Selects whether a turn direction screen of the navigation system interrupts on the LaneWatch display.

On*1/Off

Lane- Watch

Brightness

Contrast

Display

Black Level

Adjusts the LaneWatch display settings.

—

Color

Tint

Default

Fixed Guideline

Cancels/Resets all customized items in the LaneWatch group as default.

Default/OK

Selects whether the fixed guidelines come on or not on the rear camera monitor.

On*1/Off

Rear Camera

Dynamic Guideline

Selects whether the dynamic guidelines come on or not on the rear camera monitor.

On*1/Off

Default

Cancels/Resets all customized items in the Rear Camera group as default.

Default/OK

Camera Settings

*1:Default Setting

QRG

TOC

Index

Home

Continued

329

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 330 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uuCustomized Featuresu

QRG

TOC

Setup Group

Customizable Features

Description

Selectable Settings

Sound

Source Select Popup

AM/FM mode HD Radio Mode

Adjusts the settings of the audio speaker’s sound.

2 Adjusting the Sound P. 243

-6 ~ C*1 ~ +6 (Bass, Treble, Fader, Balance and SUBW), Off/Low/ Mid*1/High (SVC)

Selects whether the list of selectable audio sources comes on or not when the AUDIO button is pressed. On/Off*1
Selects whether the audio system automatically switches to the digital radio waves or receives the analogue waves only.

Auto*1/Analogue

Audio Settings

CD (MP3/WMA/AAC), iPod®, USB, Pandora® or AhaTM mode Cover Art

Turns on and off the cover art display.

On*1/Off

Bluetooth® Audio, Pandora® or AhaTM mode Connect Bluetooth Audio Device

Connects, disconnects or pairs a Bluetooth® Audio device to HFL.

Bluetooth® Audio, Pandora® or AhaTM mode Bluetooth Device List

Edits or deletes a Bluetooth® Audio device paired to HFL.

—

—

CD mode Recording from CD

CD mode Recording Quality

Selects whether the songs on music CDs are automatically recorded to the HDD or not.

Auto*1/Manual

Selects the quality of the music files recorded to the HDD.

Standard*1/High

Index

Home

330

*1:Default Setting

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 331 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uuCustomized Featuresu

QRG

TOC

Setup Group

Audio Settings

Customizable Features

Description

Selectable Settings

HDD mode HDD Info

Displays the HDD capacity.

—

CD or HDD mode Gracenote Album DB Info Update

Update the Gracenote® Album Info (Gracenote® Media Database).

Update from USB*1/ Update from CD

CD or HDD mode Update Gracenote Album Info

Update the Gracenote® Album Info (Gracenote® Media Database).

Update by USB*1/ Update by CD

HDD mode Delete all HDD Data

Pandora® or AhaTM mode USB/Bluetooth Connection Priority *

Default

Connect phone

Phone Settings

Phone

Bluetooth Device List

Edit Speed Dial

*1:Default Setting

* Not available on all models

2 Deleting all HDD Data P. 336

—

Selects the connection to have priority.

USB*1/Bluetooth

Cancels/Resets all customized items in the Audio Settings group as default.

Default/OK

Pairs a new phone to HFL, connects or disconnects a paired phone.

2 Phone Setup P. 382

Pairs a new phone to HFL, edits or deletes a paired phone, or creates a security PIN.

2 Phone Setup P. 382

Edits, adds or deletes a speed dial entry.

2 Phone Setup P. 382

—

—

—

Index

Home

Continued

331

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 332 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uuCustomized Featuresu

Customizable Features

Description

Selectable Settings

Auto Transfer

Auto Answer

Sets calls to automatically transfer from your phone to HFL when you enter the vehicle.

Sets whether to automatically answer an incoming call after about four seconds.

Phone

Ring Tone

Selects the ring tone.

On*1/Off

On/Off*1

Fixed/Mobile Phone*1/Off

Automatic Phone Sync

Use Contact Photo

Enable Text/Email

Sets a phonebook data to be automatically imported when a phone is paired to HFL.

Displays a caller’s picture on an incoming call screen.

Turns the text message/E-mail function on and off.

On*1/Off

On*1/Off

On*1/Off

Text/ Email

Select Account

Selects a mail or text message account.

—

New Text/Email Alert

Selects whether a pop-up alert comes on the screen when HFL receives a new text message/E- mail.

On/Off*1

QRG

Setup Group

TOC

Phone Settings

*1:Default Setting

Index

Home

332

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 333 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uuCustomized Featuresu

Setup Group

Customizable Features

Description

Selectable Settings

Clock/ Wallpaper type

Clock

Wallpaper

Clock Adjustment

Clock

Clock Format

See System Settings on P. 323 to P. 325.

Info Settings

Auto Time Zone *

Auto Daylight *

Clock Reset

Other

INFO Screen Preference

Default

*1:Default Setting

* Not available on all models

Selects the top menu when the INFO button is pressed. ● Info Top- A brief menu pops up. ● Info Menu- A full menu pops up. ● Off- A menu does not pop up.

Info Top/Info Menu*1/Off

Cancels/Resets all customized items in the Info Settings group as default.

Default/OK

QRG

TOC

Index

Home

333

2013 Accord Sedan1Defaulting All the Settings

When you transfer the vehicle to a third party, reset all settings to default and delete all personal data.

13 ACCORD 4D US-31T2A6000.book 334 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uuCustomized FeaturesuDefaulting All the Settings

QRG

Models without navigation system Defaulting All the Settings Reset all the menu and customized settings as the factory defaults.

Models with one display 1. Press the SETTINGS button.

Models with two displays 1. Press and hold the DISP button.

All models 2. Rotate

to select System Settings, then

press u Repeat the procedure to select Other,

then Factory data reset.

u The confirmation message will appear.

3. Rotate

to select Yes, then press

to

reset the settings.

4. Rotate

to select Yes, then press

again to reset the settings. u The confirmation message will appear.

Press

to select OK.

TOC

Index

Home

334

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 335 ページ ２０１２年１０月３日　水曜日　午後４時２１分

Models with navigation system Defaulting All the Settings Reset all the menu and customized settings as the factory defaults. 1. Press the SETTINGS button.

2. Rotate

to select System Settings, then

press

3. Rotate

to select Factory data reset,

then press u The pop-up menu appears on the screen.

4. Rotate

to select Yes, then press

u The confirmation message will appear.

5. Rotate

to select Yes, then press

again to reset the settings. u The confirmation message will appear.

Press

to select OK.

uuCustomized FeaturesuDefaulting All the Settings

1Defaulting All the Settings

When you transfer the vehicle to a third party, reset all settings to default and delete all personal data.

The following settings will be reset: • Routing & Guidance: Rerouting, Unverified Area Routing, Traffic Rerouting, Edit Waypoint Search Area, Guidance Mode, Street Name Guidance

• Route Preference

QRG

TOC

Index

Home

335

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 336 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uuCustomized FeaturesuDeleting all HDD Data

QRG

Models with navigation system Deleting all HDD Data Reset all the menu and customized settings, and delete all music data on the HDD.

1. Turn on the audio system and select the

HDD mode.

2. Press the SETTINGS button.

3. Rotate

to select Audio Settings, then

press

4. Rotate

to select Delete all HDD Data,

then press u The confirmation message will appear.

5. Rotate

to select Yes, then press

TOC

Index

Home

336

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 337 ページ ２０１２年１０月３日　水曜日　午後４時２１分

HomeLink® Universal Transceiver *

The HomeLink® Universal Transceiver can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.

1HomeLink® Universal Transceiver *

HomeLink® is a registered trademark of Johnson Controls., Inc.

■ Important Safety Precautions Refer to the safety information that comes with your garage door opener to test that the safety features are functioning properly. If you do not have the safety information, contact the manufacturer.

Before programming HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an “electronic eye,” or other safety and reverse stop features. If it does not, HomeLink may not be able to operate it.

Before programming HomeLink, make sure that people and objects are out of the way of the garage or gate to prevent potential injury or damage.

When programming a garage door opener, park just outside the garage door’s path.

Training HomeLink

Red Indicator

If you have not trained any of the buttons in HomeLink before, you should erase any previously learned codes. To do this: • Press and hold the two outside buttons for

about 20 seconds, until the red indicator blinks. Release the buttons, and proceed to step 1.

• If you are training the second or third

button, go directly to step 1.

* Not available on all models

Continued

QRG

TOC

Index

Home

337

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 338 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uuHomeLink® Universal Transceiver *uTraining HomeLink

QRG

■ Training a Button

1. Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the

HomeLink button you want to program.

2.

Press and hold the desired HomeLink button and the button on the remote transmitter. Does the HomeLink indicator (LED) blink after 10 secs?

YES

NO

NO

TOC

3.

Press and hold the programmed HomeLink button for about a sec. Does the device (garage door opener) work?

YES

NO

YES

a.

Press and hold the remote and the HomeLink button at the same time. Then, while continuing to hold the HomeLink button, press and release the button on the remote every 2 secs. Does the LED blink within 20 secs?

4.

Press and hold the HomeLink button again.

Training Complete

HomeLink LED

HomeLink indicator blinks for 2 secs,

is on.

then remains on.

5.

Press and hold the HomeLink button again. The remote-controlled device should operate.

Training Complete

a.

The remote has a rolling code. Press the “learn” button on the remote-controlled device (e.g. garage door opener).

b.

Within 30 secs, press and hold the programmed HomeLink button for 2 secs.

Index

Home

338

1Training HomeLink

Retraining a Button If you want to retrain a programmed button for a new device, you do not have to erase all button memory. You can replace the existing memory code using this procedure:

1. Press and hold the desired HomeLink button until the HomeLink indicator begins to blink.

Standard transmitter Indicator remains on for about 25 secs.

Rolling code transmitter Indicator blinks rapidly for 2 secs, then remains on for about 23 secs.

2. Continue to hold the HomeLink button and follow steps 1 - 3 under “Training a Button.”

Erasing Codes To erase all the codes, press and hold the two outside buttons until the HomeLink indicator begins to blink (about 10 to 20 secs). You should erase all codes before selling the vehicle.

If you have any problems, see the device’s instructions, visit www.homelink.com, or call HomeLink at (800) 355-3515.

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 339 ページ ２０１２年１０月３日　水曜日　午後４時２１分

Bluetooth® HandsFreeLink®

Models without navigation system Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle’s audio system, without handling your cell phone.

Using HFL ■ HFL Buttons Models with one display

Volume up

Pick-up Button

Volume down

Hang-up/Back Button Talk Button

Microphone

PHONE Button

Selector Knob

(Pick-up) button: Press to answer an incoming call.

(Hang-up/back) button: Press to end a call or to cancel a command.

(Talk) button: Press to call a number with a stored voice tag, a phonebook

name, or a number.

PHONE button: Press to go directly to the Phone screen.

Selector knob: Rotate

to select an item on the screen, then press

Continued

1Bluetooth® HandsFreeLink®

To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities: • U.S.: Visit www.handsfreelink.honda.com, or call

1-888-528-7876.

• Canada: Visit www.handsfreelink.ca, or call

1-888-528 -7876.

To use HFL, the Bluetooth On/Off setting must be On.

2 Customized Features P. 299

Voice control tips • Aim the vents away from the ceiling and close the windows, as noise coming from them may interfere with the microphone. • Press and release the

button when you want to

call a number using a stored voice tag, a phonebook name, or a number. Speak clearly and naturally after a beep.

• If the microphone picks up voices other than yours,

the command may be misinterpreted.

• To change the volume level, use the audio system's volume knob or the remote audio controls on the steering wheel.

State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.

QRG

TOC

Index

Home

339

2013 Accord Sedan1Bluetooth® HandsFreeLink®

Bluetooth® Wireless Technology The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.

HFL Limitations An incoming call on HFL will interrupt the audio system when it is playing. It will resume when the call is ended.

13 ACCORD 4D US-31T2A6000.book 340 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uUsing HFL

QRG

Models with two displays

Volume up

Pick-up Button

Microphone

Volume down

Hang-up/Back Button Talk Button

DISP Button Selector Knob

(Pick-up) button: Press to display the phone menu on half of the screen, or to

answer an incoming call.

(Hang-up/back) button: Press to end a call or to cancel a command.

(Talk) button: Press to call a number with a stored voice tag, a phonebook

name, or a number.

Selector knob: Rotate

to select an item on the screen, then press

To go to the Phone screen: 1. Press the DISP button to switch the display to the Function Change screen.

2. Rotate

to select Phone, then press

TOC

Index

Home

340

2013 Accord Sedanuu Bluetooth® HandsFreeLink®uUsing HFL

1HFL Status Display

The information that appears on the audio/ information screen varies between phone models.

You can change the system language to English, French, or Spanish.

2 Customized Features P. 299

13 ACCORD 4D US-31T2A6000.book 341 ページ ２０１２年１０月３日　水曜日　午後４時２１分

■ HFL Status Display The audio/information screen notifies you when there is an incoming call.

Bluetooth Indicator Comes on when your phone is connected to HFL. HFL Mode

Caller’s Name

Caller’s Number

Battery Level Status Roam Status

Signal Strength

■ Limitations for Manual Operation

Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option until the vehicle is stopped.

Only previously stored speed dial entries with voice tags, phonebook names, or numbers can be called using voice commands while the vehicle is in motion.

2 Speed Dial P. 358

Disabled Options

QRG

TOC

Index

Home

341

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 342 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

HFL Menus The ignition switch must be in ACCESSORY (q or ON (w *1 to use HFL.

■ Phone Settings screen

Models with one display 1. Press the SETTINGS button. Models with two displays 1. Press and hold the DISP button. All models 2. Rotate

press

to select Phone Settings, then

1HFL Menus

To use HFL, you must first pair your Bluetooth- compatible cell phone to the system while the vehicle is parked.

Some functions are limited while driving. A message appears on the screen when the vehicle is moving and the operation is canceled.

TOC

Connect Phone*2

Bluetooth Device List

Add Bluetooth Device

(Existing entry list)

Disconnect

Pair a phone to the system. Connect a phone to the system. Disconnect a paired phone from the system.

(Existing entry list)*2

Edit PIN

Replace This

Device

Delete This

Device

Create a security PIN for a paired phone. Replace a previously paired phone with a new phone.

Delete a previously paired phone.

Add

Bluetooth

Device

Pair a phone to the system.

*1:

Models

with the smart

entry system have an ENGINE START/STOP button instead of an ignition switch.

*2: Appears only when a phone is connected to HFL.

Index

Home

342

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 343 ページ ２０１２年１０月３日　水曜日　午後４時２１分

New Entry

Phone

Edit Speed

Dial*1

(Existing entry list)

uu Bluetooth® HandsFreeLink®uHFL Menus

Manual Input

Import from Call History Import from Phonebook

Enter a phone number to store as a speed dial number. Select a phone number from the call history to store as a speed dial number. Select a phone number from the phonebook to store as a speed dial number.

Edit

Delete

Edit a previously stored speed dial number. ● Change a number. ● Create or delete a voice tag. Delete a previously stored speed dial number.

Delete All

Delete all of the previously stored speed dial number.

Auto Transfer

Auto Answer

Ring Tone

Automatic Phone

Sync*1

Use Contact Photo*2

Set calls to automatically transfer from your phone to HFL when you enter the vehicle. Set whether to automatically answer an incoming call after about four seconds. Select the ring tone. Set phonebook data to be automatically imported when a phone is paired to HFL. Display a caller’s picture on an incoming call screen.

*1: Appears only when a phone is connected to HFL.

*2: Models with two displays

Continued

QRG

TOC

Index

Home

343

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 344 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

344

Text Message*1, *2

Text/Email*1, *3

Enable Text Message*2

Enable Text/Email*3

Select Account *

New Text Message Alert*2

New Text/Email Alert*3

Message Auto Reading

Turn the text message/E-mail function on and off.

Select a mail or text message account. Select whether a pop-up alert comes on the screen when HFL receives a new text message/E-mail. Sets the system to automatically read an incoming text message/E-mail.

Default

Cancel/Reset all customized items in the Phone Settings group as default.

*1: Appears only when a phone is connected to HFL.

*2: Models with one display

*3: Models with two displays

* Not available on all models

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 345 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ Phone screen

Dial*1
Redial*1

Call

History*1

Speed Dial*1

Models with one display 1. Press the PHONE button. 2. Press the MENU button to display the

menu items.

Models with two displays 1. Press the DISP button. 2. Rotate

to select Phone, then press

Enter a phone number to dial. Redial the last number dialed in the phone’s history.

All

Dialed

Received Missed

Display the last 20 outgoing, incoming and missed calls. Display the last 20 outgoing calls. Display the last 20 incoming calls. Display the last 20 missed calls.

New Entry

Manual Input Import from Call History Import from Phonebook

Enter a phone number to store as a speed dial number. Select a phone number from the call history to store as a speed dial number. Select a phone number from the phonebook to store as a speed dial number.

(Existing entry list) Dial the selected number in the speed dial list. More Speed Dials Display another paired phone’s speed dial list.

*1: Appears only when a phone is connected to HFL.

Continued

QRG

TOC

Index

Home

345

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 346 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

346

Phonebook*1

Display the paired phone’s phonebook.

Text Message*1, *2

Text/Email*1, *3

Select Account *

Select a mail or text message account.

Select a message and press

Message is read

aloud.

Read/Stop

Previous Message

Next Message

Reply

Call

System reads received message aloud, or stop message from being read. See the previous message. See the next message. Reply to a received message using one of six fixed phrases. Make a call to the sender.

*1: Appears only when a phone is connected to HFL.

*2: Models with one display

*3: Models with two displays

* Not available on all models

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 347 ページ ２０１２年１０月３日　水曜日　午後４時２１分

■ Phone Setup

■ To pair a cell phone (when there is no

phone paired to the system)

1. Go to the Phone screen. 2 Phone screen P. 345

2. Rotate to select Yes, then press 3. Make sure your phone is search or discoverable mode, then press u HFL automatically searches for a

Bluetooth device.

4. When your phone appears on the list, select

it by pressing u If your phone does not appear, you can

select Refresh to search again.

u If your phone still does not appear, select

Phone Not Found and search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.

5. HFL gives you a pairing code on the audio/

information screen. u Confirm if the pairing code on the screen

and your phone match. This may vary by phone.

6. You will receive a notification on the screen

if pairing is successful.

Continued

uu Bluetooth® HandsFreeLink®uHFL Menus

1Phone Setup

Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls.

Phone Pairing Tips: • You cannot pair your phone while the vehicle is

moving.

• Up to six phones can be paired. • Your phone's battery may drain faster when it is

paired to HFL.

• If your phone is not ready for pairing or not found by the system within three minutes, the system will time out and returns to idle.

Once you have paired a phone, you can see it displayed on the screen with one or two icons on the right side.

These icons indicate the following:

: The phone can be used with HFL. : The phone is compatible with Bluetooth® Audio.

When pairing is completed, an Automatic Phone Sync prompt appears. Select On if you want your call history and phonebook automatically imported to HFL.

2 Changing the Automatic Phone Sync

setting P. 357

QRG

TOC

Index

Home

347

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 348 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

348

■ To pair a cell phone (when a phone has

already been paired to the system)

1. Go to the Phone Settings screen.

2 Phone Settings screen P. 342

2. Rotate

to select Connect Phone, then

press u Repeat the procedure to select Add

Bluetooth Device.

3. Make sure your phone is in search or

discoverable mode, then press u HFL automatically searches for a

Bluetooth device.

4. When your phone appears on the list, select

it by pressing u If your phone does not appear, you can

select Refresh to search again.

u If your phone still does not appear, select

Phone Not Found and search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.

5. HFL gives you a pairing code on the audio/

information screen. u Confirm if the pairing code on the screen

and your phone match. This may vary by phone.

6. You will receive a notification on the screen

if pairing is successful.

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 349 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ To change the pairing code setting Models with one display 1. Press the SETTINGS button.

1To change the pairing code setting

The pairing code may be six or four digits depending on your phone.

Models with two displays 1. Press and hold the DISP button.

All models 2. Rotate

to select System Settings, then

press u Repeat the procedure to select

Bluetooth, then Edit Pairing Code. to select Fixed or Random,

3. Rotate

then press

The default pairing code is 0000 until you change the setting.

To create your own, select Fixed, and delete the current code, then enter a new one.

For a randomly generated pairing code each time you pair a phone, select Random.

Edit Pairing Code

Continued

QRG

TOC

Index

Home

349

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 350 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uHFL Menus

1To replace an already-paired phone with a new phone

The replaced phone will keep the same speed dial entries, call history, and security PIN information from the previously paired phone.

■ To replace an already-paired phone

with a new phone

1. Go to the Phone Settings screen.

2 Phone Settings screen P. 342

2. Rotate

to select Bluetooth Device List

then press

3. Rotate

to select a paired phone you

want to replace, then press

4. Rotate

to select Replace This Device,

then press

5. HFL enters the pairing process and searches

a new phone. u Follow the prompts to pair a new phone.

6. You will receive a notification on the screen

if pairing is successful.

QRG

TOC

Index

Home

350

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 351 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ To delete a paired phone 1. Go to the Phone Settings screen.

2 Phone Settings screen P. 342

2. Rotate

to select Bluetooth Device List,

then press

3. Rotate

to select a phone you want to

delete, then press

4. Rotate

to select Delete This Device,

then press

5. You will receive a confirmation message on to select Yes, then

the screen. Rotate press

6. You will receive a notification on the screen

if it is successful.

Continued

QRG

TOC

Index

Home

351

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 352 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ To Set Up a Text Message/Email Options

■ To turn on or off the text/E-mail

function

1. Go to the Phone Settings screen.

2 Phone Settings screen P. 342

Models with one display 2. Rotate

to select Text Message, then

press u Repeat the procedure to select Enable

Text Message.

u A pop-up menu appears on the screen.

Models with two displays 2. Rotate press u Repeat the procedure to select Enable

to select Text/Email, then

Text/Email.

u A pop-up menu appears on the screen.

All models 3. Rotate

press

to select On or Off, then

QRG

TOC

Index

Home

352

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 353 ページ ２０１２年１０月３日　水曜日　午後４時２１分

■ To turn on or off the text/E-mail notice Models with one display 1. On the Text Message screen, rotate

to

select New Text Message Alert, then press

Models with two displays 1. On the Text/Email screen, rotate

to

select New Text/Email Alert, then press u A pop-up menu appears on the screen.

All models 2. Rotate

press

to select On or Off, then

■ To set up the auto reading option 1. On the Text Message or the Text/Email to select Message Auto

screen, rotate Reading, then press u A pop-up menu appears on the screen.

2. Rotate

to select On, Off or Auto then

press

Continued

uu Bluetooth® HandsFreeLink®uHFL Menus

1To turn on or off the text/E-mail notice

On: A pop-up notification comes on every time you receive a new message. Off: The message you receive is stored in the system without notification.

1To set up the auto reading option

On: A text message/Email is always read aloud. Off: A text message/Email is not read aloud. Auto: A text message/Email is read aloud only when driving.

QRG

TOC

Index

Home

353

2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 354 ページ ２０１２年１０月３日　水曜日　午後４時２１分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

354

■ To Create a Security PIN You can protect each of the six cell phones with a security PIN.

1. Go to the Phone Settings screen.

2 Phone Settings screen P. 342

2. Rotate

to select Bluetooth Device List,

then press