the message aloud.
2 Displaying text messages P. 371
2. Press
to have the pop-up menu appear
on the screen.
3. Rotate
to select Call, then press
QRG
TOC
Index
Home
375
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 376 ページ 2012年10月3日 水曜日 午後4時21分
Bluetooth® HandsFreeLink®
QRG
TOC
Index
Home
376
Models with navigation system Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle’s navigation system, without handling your cell phone.
Using HFL ■ HFL Buttons
Volume up
Pick-up Button
Volume down
Hang-up/Back Button Talk Button
Microphone
PHONE Button Interface Dial
(Pick-up) button: Press to go to the Phone Call screen or to answer an
incoming call.
(Hang-up/back) button: Press to end a call or to cancel a command.
(Talk) button: Press to give HFL voice commands.
PHONE button: Press to go directly to the Phone screen.
Interface dial: Rotate
to select an item on the screen, then press
. Move
or
to select secondary menu.
1Bluetooth® HandsFreeLink®
To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities: • U.S.: Visit www.handsfreelink.honda.com, or call
1-888-528-7876.
• Canada: Visit www.handsfreelink.ca, or call (888)
1-888-528 -7876.
To use HFL, the Bluetooth setting must be On.
2 Customized Features P. 299
Voice control tips • Aim the vents away from the ceiling and close the windows, as noise coming from them may interfere with the microphone. • Press and release the
button when you want to
call a number using a stored voice tag, a phonebook name, or a number. Speak clearly and naturally after a beep.
• If the microphone picks up voices other than yours,
the command may be misinterpreted.
• To change the volume level, use the audio system's volume knob or the remote audio controls on the steering wheel.
State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 377 ページ 2012年10月3日 水曜日 午後4時21分
■ HFL Status Display The audio/information screen notifies you when there is an incoming call.
Bluetooth Indicator Comes on when your phone is connected to HFL. HFL Mode
Caller’s Name
Caller’s Number
Battery Level Status Roam Status
Signal Strength
■ Limitations for Manual Operation
Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored speed dial entries with voice tags, phonebook names, or numbers can be called using voice commands while the vehicle is in motion.
2 Speed Dial P. 394
Disabled Option
uu Bluetooth® HandsFreeLink®uUsing HFL
1Bluetooth® HandsFreeLink®
Bluetooth® Wireless Technology The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.
HFL Limitations An incoming call on HFL will interrupt the audio system when it is playing. It will resume when the call is ended.
1HFL Status Display
The information that appears on the audio/ information screen varies between phone models.
You can change the system language to English, French, or Spanish.
2 Customized Features P. 299
QRG
TOC
Index
Home
377
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 378 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
QRG
HFL Menus The power mode must be in ACCESSORY or ON to use HFL.
■ Phone Settings screen
1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press
1HFL Menus
To use HFL, you must first pair your Bluetooth- compatible cell phone to the system while the vehicle is parked.
Some functions are limited while driving. A message appears on the screen when the vehicle is moving and the operation is canceled.
Phone
Connect phone
Bluetooth Device List
(Existing entry list) Add Bluetooth
Device
Connect a phone to the system.
Pair a phone to the system.
Disconnect
Disconnect a paired phone from the system.
(Existing entry list)
Edit Device
Name Edit PIN
Replace This
Device
Delete This
Device
Edit the user name of a paired phone.
Create a security PIN for a paired phone. Replace a previously paired phone with a new phone.
Delete a previously paired phone.
Add Bluetooth
Device
Pair a phone to the system.
TOC
Index
Home
378
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 379 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
Edit Speed
Dial
Delete All Delete all the previously stored speed dial numbers.
New Entry
(Existing entry list)
Manual Input
Import from Call History Import from Phonebook
Enter a phone number to store as a speed dial number. Select a phone number from the call history to store as a speed dial number. Select a phone number from the phonebook to store as a speed dial number.
Edit
Delete
Edit a previously stored speed dial number. ● Change a number. ● Create or delete a voice tag. Delete a previously stored speed dial number.
Auto Transfer
Auto Answer
Ring Tone
Automatic Phone Sync
Use Contact Photo
Default
Set calls to automatically transfer from your phone to HFL when you enter the vehicle. Set whether to automatically answer an incoming call after about four seconds. Select the ring tone. Set phonebook data to be automatically imported when a phone is paired to HFL. Display a caller’s picture on an incoming call screen. Cancel/Reset all customized items in the Phone Settings group as default.
Enable Text/Email
Select Account
Turn the text message/E-mail function on and off. Select a mail or text message account.
New Text/Email Alert Select whether a pop-up alert comes on the screen when HFL receives a new
Text/
Email*1
*1: Appears only when a phone is connected to HFL.
text message/E-mail.
Continued
QRG
TOC
Index
Home
379
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 380 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
QRG
■ Phone screen
1. Press the PHONE button. 2. Press the MENU button to display the
menu items.
Dial*1
Enter a phone number to dial.
Phonebook*1
Display the paired phone’s phonebook.
Speed Dial*1
New Entry
Manual Input Import from Call History Import from Phonebook
Enter a phone number to store as a speed dial number. Select a phone number from the call history to store as a speed dial number. Select a phone number from the phonebook to store as a speed dial number.
(Existing entry list)
Dial the selected number in the speed dial list.
More Speed Dials Display another paired phone’s speed dial list.
*1: Appears only when a phone is connected to HFL.
TOC
Index
Home
380
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 381 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
QRG
Redial*1
Redial the last number dialed in the phone’s history.
Call History*1
All
Dialed
Received Missed
Display the last 20 outgoing, incoming and missed calls. Display the last 20 outgoing calls. Display the last 20 incoming calls. Display the last 20 missed calls.
Select a message and press
Message is read aloud.
Text/Email*1
(Read/Stop)
Previous
Next
Reply
System reads received message aloud, or stop message from being read. See the previous message. See the next message. Reply to a received message using one of six fixed phrases.
TOC
Call
Make a call to the sender.
Select Account
Select a mail or text message account.
*1: Appears only when a phone is connected to HFL.
Continued
Index
Home
381
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 382 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
QRG
■ Phone Setup
■ To pair a cell phone (when there is no
phone paired to the system)
1. Press the PHONE button. 2. Rotate
to select Yes, then press
3. Make sure your phone is search or discoverable mode, then press u HFL automatically searches for a
Bluetooth device.
4. When your phone appears on the list, select
it by pressing u If your phone does not appear, you can
select Refresh to search again.
u If your phone still does not appear, move
to select Phone Not Found? and
search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.
5. HFL gives you a pairing code on the audio/
information screen. u Confirm if the pairing code on the screen
and your phone match. This may vary by phone.
6. You will receive a notification on the screen
if pairing is successful.
TOC
Index
Home
382
1Phone Setup
Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls.
Phone Pairing Tips: • You cannot pair your phone while the vehicle is
moving.
• Up to six phones can be paired. • Your phone's battery may drain faster when it is
paired to HFL.
• If your phone is not ready for pairing or not found by the system within three minutes, the system will time out and returns to idle.
Once you have paired a phone, you can see it displayed on the screen with one or two icons on the right side. These icons indicate the following:
: The phone can be used with HFL. : The phone is compatible with Bluetooth® Audio.
When pairing is completed, an Automatic Phone Sync prompt appears. Select On if you want your call history and phonebook automatically imported to HFL.
2 Changing the Automatic Phone Sync
setting P. 393
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 383 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ To pair a cell phone (when a phone has
already been paired to the system)
1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select Connect
Phone, then Add Bluetooth Device.
3. Make sure your phone is in search or
discoverable mode, then press u HFL automatically searches for a
Bluetooth device.
4. When your phone appears on the list, select
it by pressing u If your phone does not appear, you can
select Refresh to search again.
u If your phone still does not appear, move
to select Phone Not Found? and
search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.
5. HFL gives you a pairing code on the audio/
information screen. u Confirm if the pairing code on the screen
and your phone match. This may vary by phone.
6. You will receive a notification on the screen
if pairing is successful.
Continued
QRG
TOC
Index
Home
383
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 384 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ To change the pairing code setting 1. Press the SETTINGS button.
2. Rotate
to select System Settings, then
press u Repeat the procedure to select Edit
Pairing Code.
3. Rotate
to select Fixed or Random,
then press
1To change the pairing code setting
The pairing code may be six or four digits depending on your phone.
The default pairing code is 0000 until you change the setting. To create your own, select Fixed, and delete the current code, then enter a new one.
For a randomly generated pairing code each time you pair a phone, select Random.
QRG
TOC
Index
Home
384
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 385 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ To replace an already-paired phone
1To replace an already-paired phone with a new phone
The replaced phone will keep the same speed dial entries, call history, and security PIN information from the previously paired phone.
with a new phone
1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select
Bluetooth Device List.
3. Rotate
to select a paired phone you
want to replace, then press
4. Rotate
to select Replace This Device,
then press
5. HFL enters the pairing process and searches
a new phone. u Follow the prompts to pair a new phone.
6. You will receive a notification on the screen
if pairing is successful.
Continued
QRG
TOC
Index
Home
385
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 386 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ To delete a paired phone 1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select
Bluetooth Device List.
3. Rotate
to select a phone you want to
delete, then press
4. Rotate
to select Delete This Device,
then press
5. You will receive a confirmation message on to select Yes, then
the screen. Rotate press
6. You will receive a notification on the screen
if it is successful.
QRG
TOC
Index
Home
386
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 387 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ To Set Up a Text Message/E-mail Options
■ To turn on or off the text/E-mail
function
1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select Enable
Text/Email.
u A pop-up menu appears on the screen.
3. Rotate
to select On or Off, then
press
■ To turn on or off the text/E-mail notice 1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select New
Text/Email Alert.
u A pop-up menu appears on the screen.
3. Rotate
to select On or Off, then
press
Continued
1To turn on or off the text/E-mail notice
On: A pop-up notification comes on every time you receive a new text message. Off: The message you receive is stored in the system without notification.
QRG
TOC
Index
Home
387
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 388 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ To set up the auto reading option 1. Press the SETTINGS button.
2. Rotate
to select System Settings, then
press u Repeat the procedure to select Message
Auto Reading.
u A pop-up menu appears on the screen.
3. Rotate
to select On, Off or Auto, then
press
1To set up the auto reading option
On: A text message/Email is always read aloud. Off: A text message/Email is not read aloud. Auto: A text message/Email is read aloud only when driving.
QRG
TOC
Index
Home
388
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 389 ページ 2012年10月3日 水曜日 午後4時21分
■ To Create a Security PIN You can protect each of the six cell phones with a security PIN.
1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select
Bluetooth Device List.
3. Rotate
to select a phone you want to
add a security PIN to, then press
4. Rotate
to select Edit PIN, then press
Audio/information screen
5. Enter a new four-digit number.
uu Bluetooth® HandsFreeLink®uHFL Menus
1To Create a Security PIN
If the phone is already security PIN protected, you need to enter the current security PIN before clearing the PIN or creating a new one.
Audio with touch screen
to select, then press to delete. Rotate
Audio/information screen Rotate Move OK to enter the security PIN. Audio with touch screen You can also enter a number using the icons.
to select
6. Re-enter the four-digit number.
u The screen returns to the screen in
step 4.
Continued
QRG
TOC
Index
Home
389
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 390 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ Editing User Name
Edit the user name of a paired phone as follows: 1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select
Bluetooth Device List.
3. Rotate
to select a phone you want to
edit, then press
4. Rotate
to select Edit Device Name,
then press
5. Enter a new name of the phone.
to delete. Rotate
to select, then press
Audio/information screen Rotate Move to select OK then press name. Audio with touch screen You can also enter a name using the icons.
or move to enter the
Audio/information screen
Audio with touch screen
QRG
TOC
Index
Home
390
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 391 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ Automatic Transferring If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL.
1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select Auto
Transfer.
3. Rotate
to select On, then press
■ Auto Answer You can set HFL to automatically answer an incoming call in four seconds.
1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select Auto
Answer.
3. Rotate
to select On, then press
Continued
QRG
TOC
Index
Home
391
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 392 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ Ring Tone You can change the ring tone setting.
1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select Ring
Tone.
3. Rotate
to select Fixed, Mobile Phone
or Off, then press
1Ring Tone
Fixed: The fixed ring tone sounds from the speaker. Mobile Phone: The ring tone stored in the connected cell phone sounds from the speaker. Off: No ring tones sound from the speaker.
QRG
TOC
Index
Home
392
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 393 ページ 2012年10月3日 水曜日 午後4時21分
■ Automatic Import of Cellular Phonebook and Call History
■ When Automatic Phone Sync is
set to On:
When your phone is paired, the contents of its phonebook and call history are automatically imported to HFL.
■ Changing the Automatic Phone Sync
setting
1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select
Automatic Phone Sync.
3. Rotate press
to select On or Off, then
Continued
uu Bluetooth® HandsFreeLink®uHFL Menus
1Automatic Import of Cellular Phonebook and Call History
When you select a person from the list in the cellular phonebook, you can see up to three category icons. The icons indicate what types of numbers are stored for that name.
Pref
Home
Fax
Car
Mobile
Other
Work
Pager
Message
Voice
On some phones, it may not be possible to import the category icons to HFL.
The phonebook is updated after every connection. Call history is updated after every connection or call.
QRG
TOC
Index
Home
393
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 394 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ Speed Dial Up to 20 speed dial numbers can be stored per phone.
To store a speed dial number: 1. Press the PHONE button.
2. Press the MENU button.
1Speed Dial
When a voice tag is stored, press the button to call the number using the voice tag. Say “Call” and the voice tag name.
3. Rotate
to select Speed Dial, then
press u Repeat the procedure to select New
Entry.
4. Rotate
to select a place to choose a
number from, then press From Import from Call History: u Select a number from the call history. From Manual Input: u Input the number manually. From Import from Phonebook: u Select a number from the linked cell
phone’s imported phonebook.
5. When the speed dial is successfully stored, you are asked to create a voice tag for the number. Rotate then press
to select Yes or No,
6. Using the
button, follow the prompts to
store a voice tag for the speed dial entry.
QRG
TOC
Index
Home
394
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 395 ページ 2012年10月3日 水曜日 午後4時21分
■ To add a voice tag to a stored speed
dial number
1. Press the SETTINGS button.
2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select Edit
Speed Dial.
3. Select an existing speed dial entry. u From the pop-up menu, rotate
to
select Edit, then press
4. Rotate
to select Voice Tag, then
press u From the pop-up menu, rotate
select Record, then press
to
5. Using the
button, follow the prompts to
complete the voice tag.
Continued
uu Bluetooth® HandsFreeLink®uHFL Menus
1Speed Dial
Avoid using duplicate voice tags. Avoid using “home” as a voice tag. It is easier for HFL to recognize a longer name. For example, use “John Smith” instead of “John.”
QRG
TOC
Index
Home
395
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 396 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
QRG
TOC
Index
Home
396
■ To delete a voice tag 1. Press the SETTINGS button. 2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select Edit
Speed Dial.
3. Select an existing speed dial entry. u From the pop-up menu, rotate
to
select Edit, then press
to select Voice Tag, then
4. Rotate press u From the pop-up menu, rotate
to
select Clear, then press
5. You will receive a confirmation message on to select Yes, then
the screen. Rotate press
■ To delete a speed dial 1. Press the SETTINGS button. 2. Rotate
to select Phone Settings, then
press u Repeat the procedure to select Edit
Speed Dial.
3. Select an existing speed dial entry. u From the pop-up menu, rotate
to
select Delete, then press
4. You will receive a confirmation message on to select Yes, then
the screen. Rotate press
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 397 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ Phonebook Phonetic Modification Add phonetic modifications or a new voice tag to the phone’s contact name so that it is easier for HFL to recognize voice commands.
■ To add a new voice tag 1. Press the SETTINGS button.
1Phonebook Phonetic Modification
Phonetic Modification is grayed out when Song By Voice is set to Off.
You can store up to 20 phonetic modification items.
2. Rotate
to select System Settings, then
press
3. Rotate
to select Phonebook Phonetic
Modification, then press
4. Rotate
to select the phone you want to
add phonetic modification to, then press
Continued
QRG
TOC
Index
Home
397
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 398 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
5. Rotate
to select New Voice Tag, then
press
6. Move
or
and rotate contact name, then press u The pop-up menu appears on the screen.
to select a
7. Rotate
to select Modify, then press
8. Using the
button, follow the prompts to
complete the voice tag.
9. You will receive a confirmation message on
the screen. Rotate press
to select OK, then
QRG
TOC
Index
Home
398
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 399 ページ 2012年10月3日 水曜日 午後4時21分
■ To modify a voice tag 1. Press the SETTINGS button.
2. Rotate
to select System Settings, then
press
3. Rotate
to select Phonebook Phonetic
Modification, then press
4. Rotate
to select the phone you want to
add phonetic modification to, then press
5. Rotate
to select a contact name you
want to modify, then press u The pop-up menu appears on the screen.
6. Rotate
to select Modify, then press
7. Using the
button, follow the prompts to
complete the voice tag.
8. You will receive a confirmation message on
the screen. Rotate press
to select OK, then
Continued
uu Bluetooth® HandsFreeLink®uHFL Menus
1Phonebook Phonetic Modification
You cannot modify or delete a contact name if it is edited with a phone other than the phone connected to HFL.
QRG
TOC
Index
Home
399
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 400 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ To delete a modified voice tag 1. Press the SETTINGS button.
2. Rotate
to select System Settings, then
press
3. Rotate
to select Phonebook Phonetic
Modification, then press
4. Rotate
to select the phone you want to
delete phonetic modification, then press
5. Rotate
to select a contact name you
want to delete, then press u The pop-up menu appears on the screen.
6. Rotate
to select Delete, then press
7. Move press
and rotate
to select OK, then
QRG
TOC
Index
Home
400
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 401 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
Connect phone
Phone#1
Phone#2
Phone#3
Connect phone
■ To delete all modified voice tags 1. Press the SETTINGS button.
2. Rotate
to select System Settings, then
press
3. Rotate
to select Phonebook Phonetic
Modification, then press
4. Rotate
to select the phone you want to
delete phonetic modification, then press u The contact name list appears.
5. Move
and rotate
to select Delete All,
then press
6. You will receive a confirmation message on to select Yes, then
the screen. Rotate press
Continued
QRG
TOC
Index
Home
401
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 402 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
QRG
■ Making a Call
1Making a Call
You can make calls by inputting any phone number, or by using the imported phonebook, call history, speed dial entries, or redial.
Any voice-tagged speed dial entry, phonebook name, or number can be dialed by voice from most screens. button and say “Call” and the voice tag Press the name, “Call by name” and the phonebook name, or the phone number.
The maximum range between your phone and vehicles is 30 feet (10 meters).
Once a call is connected, you can hear the voice of the person you are calling through the audio speakers.
TOC
Index
Home
402
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 403 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ To make a call using the imported
1To make a call using the imported phonebook
phonebook
1. Press the PHONE button.
2. Press the MENU button. 3. Rotate
to select Phonebook, then
press
4. The phonebook is stored alphabetically.
to Search.
Move u You can use the keyboard on the touch
screen for an alphabetical search.
This function is disabled while the vehicle is moving. However, you can call a stored voice-tagged speed dial number, phonebook name, or number using voice commands.
2 Limitations for Manual Operation P. 377
2 Speed Dial P. 394
You can use the keyboard on the audio with touch screen for an alphabetical search.
to select a number, then
5. Rotate press u Dialing starts automatically.
Continued
QRG
TOC
Index
Home
403
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 404 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ To make a call using a phone number 1. Press the PHONE button.
2. Press the MENU button.
3. Rotate
to select Dial, then press
4. Rotate
press
to select a number, then
5. Rotate
to select
, then press
u Dialing starts automatically.
1To make a call using a phone number
This function is disabled while the vehicle is moving. However, you can call a stored voice-tagged speed dial number, phonebook name, or number using voice commands.
2 Limitations for Manual Operation P. 377
2 Speed Dial P. 394
You can use the keyboard on the audio with touch screen to input numbers. Select numbers, then
to start dialing.
■ To make a call using redial 1. Press the PHONE button.
2. Press the MENU button.
3. Rotate
to select Redial, then press
u Dialing starts automatically.
1To make a call using redial
Press and hold the number dialed in your phone’s history.
button to redial the last
QRG
TOC
Index
Home
404
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 405 ページ 2012年10月3日 水曜日 午後4時21分
uu Bluetooth® HandsFreeLink®uHFL Menus
■ To make a call using the call history 1. Press the PHONE button.
2. Press the MENU button.
3. Rotate
to select Call History, then
press
4. Move
or
to select All, Dialed,
Received, and Missed.
1To make a call using the call history
The call history displays the last 20 dialed, received, or missed calls. (Appears only when a phone is connected to HFL.)
These icons next to the number indicate the following:
: Dialed calls. : Received calls. : Missed calls.
1To make a call using a speed dial entry
to select More Speed Dials to view another
Move paired phone’s speed dial list. You can make a call from that list using the currently connected phone.
When a voice tag is stored, press the call the number using the voice tag.
button to
2 Speed Dial P. 394
Any voice-tagged speed dial entry, phonebook name or number can be dialed by voice from any screen. Press the
button and follow the prompts.
5. Rotate
to select a number, then
press u Dialing starts automatically.
■ To make a call using a speed dial entry 1. Press the PHONE button.
2. Press the MENU button.
3. Rotate
to select Speed Dial, then
press
4. Rotate
to select a number, then press
press u Dialing starts automatically.
Continued
QRG
TOC
Index
Home
405
2013 Accord Sedan button to put the current call on hold to
1Receiving a Call Call Waiting Press the answer the incoming call.