2010 Honda Accord Sedan Owners Manual

Neutral (N) need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Shift to the Park position if you need to leave your vehicle for any reason. Press on the brake pedal when you are moving the shift lever from neutral to another gear.

CONTINUED

281

2010 Accord Sedan０９／０５／１８　１８：５９：００　３１ＴＡ５６２０　０２８７　

Automatic Transmission

−

Use this position for

Drive (D) your normal driving. The transmission automatically selects a suitable gear (1 through 5) for your speed and acceleration. You may notice the transmission shifting up at higher engine speeds when the engine is cold. This helps the engine warm up faster.

−

To shift from D to D3,

Drive (D3) press the shift lever release button. This position is similar to D, except only the first three gears are selected. Use D3 when towing a trailer in hilly terrain, or to provide engine braking when going down a steep hill. D3 can also keep the transmission from cycling between third and fourth gears in stop-and-go driving.

−

First (1) To shift from second to first, press the release button on the front of the shift lever. This position locks the transmission in first gear. By upshifting and downshifting through 1, 2, D3, and D, you can operate this transmission much like a manual transmission without a clutch pedal.

−

To shift to second,

Second (2) press the release button on the front of the shift lever. This position locks the transmission in second gear. It does not downshift to first gear when you come to a stop.

Use second gear:

For more power when climbing.

To increase engine braking when going down steep hills.

For starting out on a slippery surface or in deep snow.

To help reduce wheel spin.

When driving downhill with a trailer.

282

2010 Accord Sedan０９／０５／１８　１８：５９：１２　３１ＴＡ５６２０　０２８８　

Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the rpm below the red zone.

Shift Lock Release This allows you to move the shift lever out of Park if the normal method of pushing on the brake pedal and pressing the release button does not work.

1.

Set the parking brake.

2.

Remove the key from the ignition switch.

Automatic Transmission

COVER

3.

Put a cloth on the edge of the shift lock release slot cover to prevent scratches. Use a small flat-tip screwdriver or metal fingernail file to carefully pry up the edge of the cover and remove it from the slot.

4.

Insert the key in the shift lock release slot.

CONTINUED

283

2010 Accord Sedan０９／０５／１８　１８：５９：１８　３１ＴＡ５６２０　０２８９　

6.

Remove the key from the shift lock release slot, then reinstall the cover. Make sure the notch on the cover is on the right side. Press the brake pedal, and restart the engine.

If you need to use the shift lock release, it means your vehicle is developing a problem. Have it checked by your dealer.

Automatic Transmission

RELEASE BUTTON

SHIFT LOCK RELEASE SLOT

5.

Push down on the key while you press the release button on the front of the shift lever and move the shift lever out of Park to neutral.

284

2010 Accord Sedan０９／０５／１８　１８：５９：３１　３１ＴＡ５６２０　０２９０　

Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline.

If your vehicle has an automatic transmission, set the parking brake before you put the transmission in Park. This keeps the vehicle from moving and putting pressure on the parking mechanism in the transmission.

Parking Tips

Make sure the moonroof (if equipped) and the windows are closed.

Turn off the lights.

Place any packages, valuables, etc., in the trunk or take them with you.

Lock the doors.

ExceptLX Check the indicator on the instrument panel to verify that the security system is set.

Never park over dry leaves, tall grass, or other flammable materials. The hot three way catalytic converter could cause these materials to catch on fire.

Parking

If the vehicle is facing uphill, turn the front wheels away from the curb. If your vehicle has a manual transmission, put it in first gear.

If the vehicle is facing downhill, turn the front wheels toward the curb. If your vehicle has a manual transmission, put it in reverse gear.

Make sure the parking brake is fully released before driving away. Driving with the parking brake partially set can overheat or damage the rear brakes.

285

2010 Accord Sedan０９／０５／１８　１８：５９：４０　３１ＴＡ５６２０　０２９１　

Braking System

Your vehicle is equipped with disc brakes at all four wheels. A power assist helps reduce the effort needed on the brake pedal. The emergency brake assist system increases the stopping force when you depress the brake pedal hard in an emergency situation. The anti-lock brake system (ABS) helps you retain steering control when braking very hard.

Resting your foot on the pedal keeps the brakes applied lightly, builds up heat, reduces their effectiveness and reduces brake pad life. In addition, fuel economy can be reduced. It also keeps your brake lights on all the time, confusing drivers behind you.

Constant application of the brakes when going down a long hill builds up heat and reduces their effective- ness. Use the engine to assist the brakes by taking your foot off the accelerator and downshifting to a lower gear.

Check the brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Be extra cautious in your driving.

Braking System Design The hydraulic system that operates the brakes has two separate circuits. Each circuit works diagonally across the vehicle (the left-front brake is connected with the right-rear brake, etc.). If one circuit should develop a problem, you will still have braking at two wheels.

Brake Pad Wear Indicators The front and rear disc brakes on all models have audible brake pad wear indicators.

If the brake pads need replacing, you will hear a distinctive, metallic screeching sound when you apply the brake pedal. If you do not have the brake pads replaced, they will screech all the time. It is normal for the brakes to occasionally squeal or squeak when you apply them.

286

2010 Accord Sedan０９／０５／１８　１８：５９：５０　３１ＴＡ５６２０　０２９２　

You will feel a pulsation in the brake pedal when the ABS activates, and you may hear some noise. This is normal: it is the ABS rapidly pumping the brakes. On dry pavement, you will need to press on the brake pedal very hard before the ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.

The anti-lock brake system (ABS) helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than a person can do it.

The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking distribution according to vehicle loading.

Youshouldneverpumpthebrakepedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as ‘‘stomp and steer.’’

Anti-lock Brakes (ABS)

ABS Indicator

If this indicator comes on, the anti- lock function of the braking system has shut down. The brakes still work like a conventional system, but without anti-lock. You should have your dealer inspect your vehicle as soon as possible.

If the ABS indicator comes on while driving, test the brakes as shown on page

367

CONTINUED

287

2010 Accord Sedan０９／０５／１８　１９：００：００　３１ＴＡ５６２０　０２９３　

Anti-lock Brakes (ABS)

If the ABS indicator and the brake system indicator come on together, and the parking brake is fully released, the EBD system may also be shut down.

ImportantSafetyReminders ABS does not reduce the time or distance it takes to stop the vehicle. It only helps with the steering control during braking.

A vehicle with ABS may require a longer distance to stop on loose or uneven surfaces, such as gravel or snow, than a vehicle without anti- lock.

ABS will not prevent a skid that results from changing direction abruptly, such as trying to take a corner too fast or making a sudden lane change. Always drive at a safe speed for the road and weather conditions.

ABS cannot prevent a loss of stability. Always steer moderately when you are braking hard. Severe or sharp steering wheel movement can still cause your vehicle to veer into oncoming traffic or off the road.

367

. If the brakes feel normal,

Test your brakes as instructed on page drive slowly and have your vehicle repaired by your dealer as soon as possible. Avoid sudden hard braking which could cause the rear wheels to lock up and possibly lead to a loss of control.

The VSA indicator will come on along with the ABS indicator.

288

2010 Accord Sedan０９／０５／１８　１９：００：１３　３１ＴＡ５６２０　０２９４　

Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System

The vehicle stability assist (VSA) system helps to stabilize the vehicle during cornering if the vehicle turns more or less than desired. It also assists you in maintaining traction while accelerating on loose or slippery road surfaces. It does this by regulating the engine’s output and by selectively applying the brakes.

When VSA activates, you may notice that the engine does not respond to the accelerator in the same way it does at other times. There may also be some noise from the VSA hydraulic system. You will also see the VSA activation indicator blink.

The VSA system cannot enhance the vehicle’s driving stability in all situations and does not control your vehicle’s entire braking system. It is still your responsibility to drive and corner at reasonable speeds and to leave a sufficient margin of safety.

VSA Activation Indicator

When VSA activates, you will see the VSA activation indicator blink.

Vehicle Stability Assist (VSA) System Indicator

If this indicator comes on while driving, pull to the side of the road when it is safe, and turn off the engine. Reset the system by restarting the engine. If the VSA system indicator stays on or comes back on while driving, have the VSA system inspected by your dealer.

The main function of the

NOTE: VSA system is generally known as Electronic Stability Control (ESC). The system also includes a traction control function.

If the indicator does not come on when the ignition switch is turned to the ON (II) position, there may be a problem with the VSA system. Have your dealer inspect your vehicle as soon as possible.

If the low tire pressure indicator or TPMS indicator comes on, the VSA system automatically turns on even if the VSA system is turned off by pressing the VSA OFF switch (see page cannot turn the VSA system off by pressing the VSA OFF switch again.

). If this happens, you

290

Without VSA, your vehicle will have normal braking and cornering ability, but it will not have VSA traction and stability enhancement.

289

2010 Accord Sedan０９／０５／１８　１９：００：２３　３１ＴＡ５６２０　０２９５　

Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System

VSA and Tire Sizes Driving with varying tire or wheel sizes may cause the VSA to malfunction. When replacing tires, make sure they are of the same size and type as your original tires (see page

344

).

If you install winter tires, make sure they are the same size as those that were originally supplied with your vehicle. Exercise the same caution during winter driving as you would if your vehicle was not equipped with VSA.

VSA is turned on every time you start the engine, even if you turned it off the last time you drove the vehicle.

In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow, it may be easier to free it with the VSA temporarily switched off. When the VSA system is off, the traction control system is also off. You should only attempt to free your vehicle with the VSA off if you are not able to free it when the VSA is on.

Immediately after freeing your vehicle, be sure to switch the VSA on again. We do not recommend driving your vehicle with the VSA and traction control systems switched off.

VSA OFF Switch

VSA OFF SWITCH

This switch is under the driver’s side vent. To turn the VSA system on and off, press and hold it until you hear a beep.

When VSA is off, the VSA activation indicator comes on as a reminder. Press and hold the switch again. It turns the system back on.

290

2010 Accord Sedan０９／０５／１８　１９：００：３５　３１ＴＡ５６２０　０２９６　

Tire Pressure Monitoring System (TPMS)

Your vehicle is equipped with a tire pressure monitoring system (TPMS) that turns on every time you start the engine and monitors the pressure in your tires while driving.

Each tire has its own pressure sensor (not including the spare tire). If the air pressure of a tire becomes significantly low while driving, the sensor in that tire immediately sends a signal that causes the low tire pressure indicator to come on.

Low Tire Pressure Indicator

When the low tire pressure indicator is on, one or more of your tires is significantly underinflated. You should stop and check your tires as soon as possible, and inflate them to the proper pressure as indicated on the vehicle’s tire information placard.

If you think you can safely drive a short distance to a service station, proceed slowly, and inflate the tire to the recommended pressure shown on the driver’s doorjamb.

If the tire is flat, or if the tire pressure is too low to continue driving, replace the tire with the compact spare tire (see page 352

).

If you cannot make the low tire pressure indicator go out after inflating the tires to the specified values, have your dealer check the system as soon as possible.

Driving on a significantly under inflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.

Because tire pressure varies by temperature and other conditions, the low tire pressure indicator may come on unexpectedly.

CONTINUED

291

2010 Accord SedanWhen you restart the vehicle with the compact spare tire, the TPMS indicator may also come on and stay on after driving several miles (kilometers).

０９／０５／１８　１９：００：４５　３１ＴＡ５６２０　０２９７　

Tire Pressure Monitoring System (TPMS)

information label and in the owner’s manual (see page

340

).

Tire Pressure Monitoring System (TPMS) Indicator This indicator comes on and stays on if there is a problem with the tire pressure monitoring system.

If this happens, the system will shut off and no longer monitor tire pressures. Have the system checked by your dealer as soon as possible.

If the low tire pressure indicator or TPMS indicator comes on, the VSA system automatically turns on even if the VSA system is turned off by pressing the VSA OFF switch (see page cannot turn the VSA system off by pressing the VSA OFF switch again.

). If this happens, you

290

For example, if you check and fill your tires in a warm area, then drive in extremely cold weather, the tire pressure will be lower than measured and could be underinflated and cause the low tire pressure indicator to come on. Or, if you check and adjust your tire pressure in cooler conditions, and drive into extremely hot conditions, the tire may become overinflated. However, the low tire pressure indicator will not come on if the tires are overinflated.

Refer to page guidelines.

339

for tire inflation

Although your tire pressure is monitored, you must manually check the tire pressures monthly.

Each tire, including the spare, should be checked monthly when cold, and set to the recommended inflation pressure as specified on the tire

292

2010 Accord Sedan０９／０５／１８　１９：００：５５　３１ＴＡ５６２０　０２９８　

Tire Pressure Monitoring System (TPMS)

The low tire pressure indicator or the TPMS indicator will go off, after several miles (kilometers) driving, when you replace the spare tire with the specified regular tire equipped with the tire pressure monitor sensor.

Never use a puncture-repairing agent in a flat tire. If used, you will have to replace the tire pressure sensor. Have the flat tire repaired by your dealer as soon as possible.

Changing a Tire with TPMS If you have a flat tire, the low tire pressure indicator will come on. Replace the flat tire with the compact spare tire (see page

352

).

Each wheel (except the compact spare tire wheel) is equipped with a tire pressure sensor mounted inside the tire behind the valve stem. You must use TPMS specific wheels. It is recommended that you always have your tires serviced by your dealer or qualified technician.

After you replace the flat tire with the compact spare tire, the low tire pressure indicator stays on. This is normal; the system is not monitoring the spare tire pressure. Manually check the spare tire pressure to be sure it is correct. After several miles (kilometers) driving with the compact spare tire, the TPMS indicator comes on and the low tire pressure indicator goes off.

AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.

Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.

ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

293

2010 Accord Sedan09/07/08 21:41:38 31TA5620_299

Towing a Trailer

Your vehicle has been designed primarily to carry passengers and their cargo. You can also use it to tow a trailer if you carefully observe the load limits, use the proper equipment, and follow the guidelines in this section.

Break-InPeriod Avoid towing a trailer during your vehicle’s first 600 miles (1,000 km) (see page

256

).

294

Load Limits

Exceeding any load limit or improperly loading your vehicle and trailer can cause a crash in which you can be seriously hurt or killed.

Check the loading of your vehicle and trailer carefully before starting to drive.

The

Total Trailer Weight: maximum allowable weight of the trailer and everything in or on it must not exceed 1,000 lbs (450 kg). Towing a load that is too heavy can seriously affect your vehicle’s handling and performance. It can also damage the engine and drivetrain.

2010 Accord Sedan０９／０５／１８　１９：０１：１３　３１ＴＡ５６２０　０３００　

Towing a Trailer

To achieve a proper tongue load, start by loading 60% of the load toward the front of the trailer and 40% toward the rear, then re-adjust the load as needed.

Gross Vehicle Weight Rating (GVWR): The maximum allowable weight of the vehicle, all occupants, all accessories, all cargo, and the tongue load is:

Canadian models

LXandLX-P:

1,970 kg

EXandEX-L:

2,030 kg

V6models: 2,090 kg

Tongue Load: The weight that the tongue of a fully-loaded trailer puts on the hitch should be approximately 10% of the total trailer weight. Too much tongue load reduces front-tire traction and steering control. Too little tongue load can make the trailer unstable and cause it to sway.

U.S. models

LXandLX-P:

4,299 lbs (1,950 kg)

EXandEX-L:

4,431 lbs (2,010 kg)

V6models:

4,575 lbs (2,075 kg)

CONTINUED

295

2010 Accord Sedan０９／０５／１８　１９：０１：２７　３１ＴＡ５６２０　０３０１　

Canadian models

LXandLX-P:

1,065 kg on the front axle 920 kg on the rear axle

EXandEX-L:

1,095 kg on the front axle 950 kg on the rear axle

V6models: 1,175 kg on the front axle 950 kg on the rear axle

Towing a Trailer

Gross Axle Weight Rating (GAWR): The maximum allowable weight at the vehicle axles is:

U.S. models

LXandLX-P:

2,337 lbs (1,060 kg) on the front axle 2,017 lbs (915 kg) on the rear axle

EXandEX-L:

2,403 lbs (1,090 kg) on the front axle 2,061 lbs (935 kg) on the rear axle

V6models:

2,557 lbs (1,160 kg) on the front axle 2,061 lbs (935 kg) on the rear axle

296

Checking Loads The best way to confirm that all loads are within limits is to check them at a public scale. For public scales in your area, check your local phone book, or contact your trailer dealer or rental agency for assistance.

If you cannot get to a public scale, you can estimate the total trailer weight by adding the weight of your trailer (as quoted by the manufacturer) with everything in or on the trailer.

If you normally pull the same load each time you tow a trailer, you can use a suitable scale or a special tongue load gauge to check the tongue load the first time you set up a towing combination (a fully loaded vehicle and trailer), then recheck the tongue load whenever the conditions change.

2010 Accord Sedan０９／０５／１８　１９：０１：４０　３１ＴＡ５６２０　０３０２　

Towing Equipment and Accessories Towing can require a variety of equipment, depending on the size of your trailer, how it will be used, how much load you are towing, and where you tow.

Discuss your needs with your trailer sales or rental agency, and follow the guidelines in this section. Also make sure that all equipment is properly installed and maintained, and that it meets federal, state, province, territory, and local regulations.

Hitches Any hitch used on your vehicle must be properly bolted to the underbody.

SafetyChains Always use safety chains when you tow a trailer. Make sure the chains are secured to the trailer and hitch, and that they cross under the tongue and can catch the trailer if it becomes unhitched. Leave enough slack to allow the trailer to turn corners easily, but do not let the chains drag on the ground.

Towing a Trailer

TrailerBrakes There are two common types of trailer brakes: surge and electric. Surge brakes are common for boat trailers, since the brakes will get wet.

If you choose electric brakes, be sure they are electronically actuated. Do not attempt to tap into your vehicle’s hydraulic system. No matter how successful it may seem, any attempt to attach trailer brakes to your vehicle’s hydraulic system will lower braking effectiveness and create a potential hazard.

See your trailer dealer or rental agency for more information on installing electric brakes.

CONTINUED

297

2010 Accord Sedan０９／０５／１８　１９：０１：５２　３１ＴＡ５６２０　０３０３　

Towing a Trailer

TrailerLights Trailer lights and equipment must comply with federal, state, province, territory, and local regulations. Check with your local trailer sales or rental agencies for the requirements in the area where you plan to tow, and use only equipment designed for your vehicle.

Since lighting and wiring vary by trailer type and brand, you should have a qualified technician install a suitable connector between the vehicle and the trailer. Improper equipment or installation can cause damage to your vehicle’s electrical system and affect your vehicle warranty.

298

AdditionalTowingEquipment Many states and Canadian provinces/territories require special outside mirrors when towing a trailer. Even if they don’t, you should install special mirrors if you cannot clearly see behind you, or if the trailer creates a blind spot. Ask your trailer sales or rental agency if any other items are recommended or required for your towing situation.

Pre-Tow Checklist When preparing to tow, and before driving away, be sure to check the following:

The vehicle has been properly serviced, and the suspension and the cooling system are in good operating condition.

The trailer has been properly serviced and is in good condition.

All weights and loads are within limits.

The hitch, safety chains, and any other attachments are secure.

All items in or on the trailer are properly secured and cannot shift while you drive.

2010 Accord Sedan０９／０５／１８　１９：０２：０５　３１ＴＡ５６２０　０３０４　

The lights and brakes on your vehicle and the trailer are working properly.

Your vehicle tires and spare are properly inflated, and the trailer tires and spare are inflated as recommended by the trailer maker.

Driving Safely With a Trailer The added weight, length, and height of a trailer will affect your vehicle’s handling and performance, so driving with a trailer requires some special driving skills and techniques.

For your safety and the safety of others, take time to practice driving maneuvers before heading for the open road, and follow the guidelines in this section.

TowingSpeedsandGears Drive slower than normal in all driving situations, and obey posted speed limits for vehicles with trailers. If you have an automatic transmission, use the D position when towing a trailer on level roads. D3 is the proper shift lever position to use when towing a trailer in hilly terrain. (See ‘‘ DrivingonHills next column for additional gear information.)

’’ in the

Towing a Trailer

MakingTurnsandBraking Make turns more slowly and wider than normal. The trailer tracks a smaller arc than your vehicle, and it can hit or run over something the vehicle misses. Allow more time and distance for braking. Do not brake or turn suddenly as this could cause the trailer to jackknife or turn over.

DrivingonHills When climbing hills, closely watch your temperature gauge. If it nears the red (Hot) mark, turn the air conditioning off, reduce speed and, if necessary, pull to the side of the road to let the engine cool.

If the automatic transmission shifts frequently while going up a hill, shift to D3.

CONTINUED

299

2010 Accord SedanTowing Your Vehicle Your vehicle is not designed to be towed behind a motor home. If your vehicle needs to be towed in an emergency, see page

375

０９／０５／１８　１９：０２：１６　３１ＴＡ５６２０　０３０５　

BackingUp Always drive slowly and have someone guide you when backing up. Grip the of the steering wheel, then turn the wheel to the left to get the trailer to move to the left. Turn the wheel to the right to move the trailer to the right.

bottom

Parking Follow all normal precautions when parking, including firmly setting the parking brake and putting the transmission in Park (automatic) or in 1st or reverse (manual). Also, place wheel chocks at each of the trailer’s tires.

Towing a Trailer

When driving down hills, reduce your speed, and shift down to second gear. Do not ‘‘ride’’ the brakes, and remember, it will take longer to slow down and stop when towing a trailer.

If you must stop when facing uphill, use the foot brake or parking brake. Do not try to hold the vehicle in place by pressing on the accelerator, as this can cause the automatic transmission to overheat.

HandlingCrosswindsandBuffeting Crosswinds and air turbulence caused by passing trucks can disrupt your steering and cause the trailer to sway. When being passed by a large vehicle, keep a constant speed, and steer straight ahead. Do not try to make quick steering or braking corrections.

300

2010 Accord Sedan０９／０５／１８　１９：０２：２２　３１ＴＡ５６２０　０３０６　

Maintenance

This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions.

This section also includes instructions on how to read the maintenance minder messages on the information display, and instructions for simple maintenance tasks you may want to take care of yourself.

If you have the skills and tools to perform more complex maintenance tasks on your vehicle, you may want to purchase the service manual. See page for information on how to obtain a copy, or see your dealer.

399

Maintenance Safety Maintenance Minder Fluid Locations Adding Engine Oil Changing the Engine Oil and

...................... .................... .............................. ........................

Filter

Brake Fluid Clutch Fluid

Engine Coolant Windshield Washers Transmission Fluid

Automatic Transmission Manual Transmission Brake and Clutch Fluid

........................................... .............................. .................... ....................... .......... .............. ................ ................................ ............................... .................... .................................... ............................................. ................ ..................................... .................. ................................. ............................................... ................... .............................

Power Steering Fluid Timing Belt Lights Cleaning the Seat Belts Floor Mats Dust and Pollen Filter Wiper Blades Tires Checking the Battery Vehicle Storage

. 302
. 303
. 310
. 312

. 314
. 316
. 318
. 319
. 319
. 321
. 322
. 322
. 323
. 323
. 324
. 325
. 334
. 334
. 335
. 336
. 339
. 347
. 348

301

2010 Accord Sedan09/07/08 21:41:48 31TA5620_307

Maintenance Safety

All service items not detailed in this section should be performed by a certified technician or other qualified mechanic.

Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required.

Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.

To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.

To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the battery and all fuel-related parts.

Wear eye protection and protective clothing when working with the battery or compressed air.

302

Improperly maintaining this vehicle, or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.

Always follow the inspection and maintenance recommendations and schedules in this owner’s manual.

Potential Vehicle Hazards Carbon Monoxide poison from engine exhaust. there is adequate ventilation whenever you operate the engine.

Be sure

Burns from hot parts. Let the engine and exhaust system cool down before touching any parts.

Injury from moving parts. not run the engine unless instructed to do so.

Do

Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this owner’s manual.

Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.

2010 Accord Sedan０９／０５／１８　１９：０２：４７　３１ＴＡ５６２０　０３０８　

Your vehicle displays engine oil life and maintenance service items on the information display to show you when you should have your dealer do engine oil replacement and indicated maintenance service.

Based on the engine operating conditions, the onboard computer in your vehicle calculates the remaining engine oil life and displays it as a percentage.

Maintenance Minder

Engine Oil Life Display

SELECT/RESET KNOB

The remaining engine oil life is shown on the display according to this table:

Calculated Engine

Displayed

ENGINE OIL LIFE INDICATOR

U.S. model is shown.

To see the current engine oil life, turn the ignition switch to the ON (II) position, then press and release the select/reset knob repeatedly until the engine oil life indicator appears (see page

64

).

Oil Life (%) 91 % 100 % 81 % 90 % 71 % 80 % 61 % 70 % 60 % 51 % 41 % 50 % 31 % 40 % 21 % 30 % 16 % 20 % 15 % 11 % 6 % 10 % 5 % 1 %

− − − − − − − − − − − − 0 %

Engine Oil Life (%)

100 % 90 % 80 % 70 % 60 % 50 % 40 % 30 % 20 % 15 % 10 % 5 % 0 %

CONTINUED

303

2010 Accord Sedan０９／０５／１８　１９：０２：５５　３１ＴＡ５６２０　０３０９　

Maintenance Minder

MAINTENANCE MINDER INDICATOR

ENGINE OIL LIFE INDICATOR

MAINTENANCE ITEM CODE(S) U.S. model is shown.

If the remaining engine oil life is 15
to 6 percent, you will see the engine oil life indicator every time you turn the ignition switch to the ON (II) position. The maintenance minder indicator will also come on, and the maintenance item code(s) for other scheduled maintenance items needing service will be displayed next to the engine oil life indicator.

304

The 15 and 10 percent oil life indicators remind you that your vehicle will soon be due for scheduled maintenance.

When the remaining engine oil life is 5 to 1 percent, you will see a ‘‘SERVICE’’ message along with the same maintenance item code(s), every time you turn the ignition switch to the ON (II) position.

2010 Accord Sedan０９／０５／１８　１９：０３：０７　３１ＴＡ５６２０　０３１０　

Maintenance Minder

The maintenance item code or codes indicate the main and sub items required at the time of the oil change (see page

309

).

You can switch the information display from the engine oil life display to the odometer or the trip meter. Press and release the select/ reset knob on the instrument panel.

When the engine oil life is 15 to 1
percent, the maintenance minder indicator ( ) comes on every time you turn the ignition switch to the ON (II) position, then it goes out if you switch the information display.

When you see this message, have the indicated maintenance performed by your dealer as soon as possible.

When the remaining engine oil life is 0 percent, the engine oil life indicator will blink. The display comes on every time you turn the ignition switch to the ON (II) position. The maintenance minder indicator on in the instrument panel. When you see this message, immediately have the indicated maintenance done by your dealer.

) also comes on and remains

NEGATIVE DISTANCE TRAVELED

If you do not perform the indicated maintenance, negative distance traveled is displayed and begins to blink after the vehicle has been driven 10 miles (10 km) or more.

Negative distance traveled means your vehicle has passed the maintenance required point. Immediately have the indicated maintenance done by your dealer.

CONTINUED

305

2010 Accord Sedan０９／０５／１８　１９：０３：１８　３１ＴＡ５６２０　０３１１　

Maintenance Minder

To change the information display from the engine oil life display to the odometer or the trip meter, press and release the select/reset knob.

Maintenance Main Items and Sub Items

MAINTENANCE MINDER INDICATOR

MAINTENANCE MAIN ITEM

When the engine oil life is 0 percent or negative distance traveled, the maintenance minder indicator ) remains on even if you change the information display.

Immediately have the service performed, and make sure to reset the display as described as follows.

MAINTENANCE SUB ITEM(S)

U.S. model is shown.

All maintenance items displayed on the information display are in code. For an explanation of these maintenance codes, see page

309

Resetting the Engine Oil Life Display Your dealer will reset the display after completing the required maintenance service. You will see ‘‘OIL LIFE 100%’’ on the information display the next time you turn the ignition switch to the ON (II) position.

If maintenance service is done by someone other than your dealer, reset the maintenance minder as follows:

1.

Turn the ignition switch to the ON (II) position.

2.

Press the select/reset knob repeatedly until the engine oil life indicator is displayed.

306

2010 Accord Sedan０９／０５／１８　１９：０３：２８　３１ＴＡ５６２０　０３１２　

3.

Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.

4.

Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to ‘‘100.’’

Maintenance Minder

Important Maintenance Precautions If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the correct maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.

Your authorized Honda dealer knows your vehicle best and can provide competent, efficient service.

CONTINUED

307

2010 Accord Sedan０９／０５／１８　１９：０３：４０　３１ＴＡ５６２０　０３１３　

Maintenance Minder

However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Make sure to have the service facility or person reset the display as previously described. Keep all receipts as proof of completion, and have the person who does the work fill out your Honda Service History or Canadian Maintenance Log. Check your warranty booklet for more information.

We recommend using Honda parts and fluids whenever you have maintenance done. These are manufactured to the same high quality standards as the original components, so you can be confident of their performance and durability.

308

U.S. Vehicles: Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individual using parts that are ‘‘certified’’ to EPA standards.

＃

According to state and federal regulations, failure to perform maintenance on the items marked with will not void your emissions warranties. However, all maintenance services should be performed in accordance with the intervals indicated by the information display.

Owner’s Maintenance Checks You should check the following items at the specified intervals. If you are unsure of how to perform any check, turn to the appropriate page listed.

Engine oil level time you fill the fuel tank. See page

Check every

262

−

Engine coolant level radiator reserve tank every time you fill the fuel tank. See page

Check the

−

263

Automatic transmission Check the fluid level monthly. See page 319

−

Brakes monthly. See page

−

Check the fluid level

322

−

Tires Check the tire pressure monthly. Examine the tread for wear and foreign objects. See page 339

−

Check the operation of

Lights the headlights, parking lights, taillights, high-mount brake light, and license plate lights monthly. See page

325

2010 Accord Sedan０９／０５／１８　１９：０３：５０　３１ＴＡ５６２０　０３１４　

Maintenance Minder

Symbol

Maintenance Main Items

Replace engine oil ＊ Replace engine oil and oil filter ＊ Inspect front and rear brakes Check parking brake adjustment Inspect these items:

Tie rod ends, steering gear box, and boots Suspension components Driveshaft boots Brake hoses and lines (including ABS/VSA) All fluid levels and condition of fluids Exhaust system ＃ Fuel lines and connections ＃

＊

1 :

If the message ‘‘SERVICE’’ does not appear more than 12 months after the display is reset, change the engine oil every year.

＃

See information on maintenance and emissions warranty in the center column on page

308

NOTE:

Independent of the maintenance messages in the information display, replace the brake fluid every 3 years.

Inspect idle speed every 160,000 miles (256,000 km).

Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy.

Symbol

Maintenance Sub Items

Rotate tires Replace air cleaner element

If you drive in dusty conditions, replace every 15,000
miles (24,000 km).

Replace dust and pollen filter

If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace every 15,000 miles (24,000 km).

Inspect drive belt Replace transmission fluid Replace spark plugs Replace timing belt and inspect water pump (V6 engine only)

If you drive regularly in very high temperatures (over 110°F, 43°C), or in very low temperatures (under − (Canada).

29°C), replace every 60,000 miles (U.S.)/100,000 km

−

20°F,

Inspect valve clearance Replace engine coolant

309

2010 Accord Sedan０９／０５／１８　１９：０３：５４　３１ＴＡ５６２０　０３１５　

Fluid Locations

4-cylinder models

BRAKE FLUID (Black cap)

ENGINE OIL DIPSTICK (Orange handle)

POWER STEERING FLUID (Red cap)

WASHER FLUID (Blue cap)

ENGINE COOLANT RESERVOIR

RADIATOR CAP

310

CLUTCH FLUID (Manual Transmission only) (Light gray cap)

ENGINE OIL FILL CAP

AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop)

2010 Accord Sedan０９／０５／１８　１９：０４：００　３１ＴＡ５６２０　０３１６　

V6 models

ENGINE OIL DIPSTICK (Orange loop)

ENGINE OIL FILL CAP

POWER STEERING FLUID (Red cap)

WASHER FLUID (Blue cap)

ENGINE COOLANT RESERVOIR

Fluid Locations

BRAKE FLUID (Black cap)

AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop)

RADIATOR CAP

311

2010 Accord Sedan０９／０５／１８　１９：０４：０７　３１ＴＡ５６２０　０３１７　

Adding Engine Oil

ENGINE OIL FILL CAP

ENGINE OIL FILL CAP

4-cylinder models

V6 models

Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully so you do not spill any. Clean up any spills immediately. Spilled oil could damage components in the engine compartment.

Reinstall the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level on the engine oil dipstick. Do not fill above the upper mark; you could damage the engine.

312

Recommended Engine Oil Oil is a major contributor to your engine’s performance and longevity. Always use a premium-grade 5W-20
detergent oil displaying the API Certification Seal. This seal indicates the oil is energy conserving, and that it meets the American Petroleum Institute’s latest requirements.

2010 Accord Sedan０９／０５／１８　１９：０４：１７　３１ＴＡ５６２０　０３１８　

Honda Motor Oil is the preferred 5W-20 lubricant for your vehicle. It is highly recommended that you use Honda Motor Oil in your vehicle for optimum engine protection. Make sure the API Certification Seal says ‘‘For Gasoline Engines.’’

The oil viscosity or weight is provided on the container’s label. 5W-20 oil is formulated for year- round protection of your vehicle to improve cold weather starting and fuel economy.

API CERTIFICATION SEAL

Ambient Temperature

Adding Engine Oil

Synthetic Oil You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil: it displays the API Certification Seal, and it is the proper weight. You must follow the oil and filter change intervals shown on the information display.

Engine Oil Additives Your vehicle does not require any oil additives. Additives may adversely affect the engine or transmission performance and durability.

313

2010 Accord Sedan０９／０５／１８　１９：０４：２８　３１ＴＡ５６２０　０３１９　

Changing the Engine Oil and Filter

WASHER

WASHER

4-cylinder models

OIL DRAIN BOLT

2.

Open the hood, and remove the engine oil fill cap. Remove the oil drain bolt and washer from the bottom of the engine. Drain the oil into an appropriate container.

V6 models

OIL DRAIN BOLT

3.

Remove the oil filter and let the remaining oil drain. A special wrench (available from your dealer) is required.

Make sure the oil filter gasket is not stuck to the contacting surface of the engine. If it is, remove it before installing a new oil filter.

Always change the oil and filter according to the maintenance messages shown on the information display. The oil and filter collect contaminants that can damage your engine if they are not removed regularly.

Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service station- type hydraulic lift for this service. Unless you have the knowledge and proper equipment, you should have this maintenance done by a skilled technician.

1.

Run the engine until it reaches normal operating temperature, then shut it off.

314

2010 Accord Sedan０９／０５／１８　１９：０４：４１　３１ＴＡ５６２０　０３２０　

OIL FILTER

OIL FILTER

4-cylinder models

V6 models

4.

Install a new oil filter according to the instructions that come with it. Make sure to clean off any dirt and dust on the contacting surface of a new oil filter.

5.

Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten the drain bolt to: 29 lbf·ft (39 N·m , 4.0 kgf·m)

6.

Refill the engine with the recom- mended oil.

Engine oil change capacity (including filter):

4-cylindermodels 4.2 US qt (4.0 )

V6models 4.5 US qt (4.3 )

Changing the Engine Oil and Filter

7.

8.

9.

Reinstall the engine oil fill cap. Start the engine. The oil pressure indicator should go out within 5
seconds. If it does not, turn off the engine, and check your work.

Let the engine run for several minutes, then check the drain bolt and oil filter for leaks.

Turn off the engine, let it sit for several minutes, then check the oil level on the dipstick. If necessary, add more oil.

Improper disposal of engine oil can be harmf ul to the environment. If you change your own oil, please dispose of the used oil properly. Put it in a sealed container and take it to a recycling center. Do not discard it in a trash bin or dump it on the ground.

315

2010 Accord Sedan０９／０５／１８　１９：０４：４９　３１ＴＡ５６２０　０３２１　

Engine Coolant

Adding Engine Coolant

4-cylinder models

RESERVE TANK

V6 models

RESERVE TANK

If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks.

Always use Honda Long-life Anti- freeze/Coolant Type 2. This coolant is pre-mixed with 50 percent antifreeze and 50 percent distilled water. Never add straight antifreeze or plain water.

316

If Honda antifreeze/coolant is not available, you may use another major-brand non-silicate coolant as a temporary replacement. Make sure it is a high-quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.

4-cylindermodelsonly

If you regularly drive your vehicle under severe conditions in very low 35°C), a temperature (under higher concentration of coolant should be used. Consult your Honda dealer f or more inf ormation on the proper coolant.

31°F,

−

−

2010 Accord Sedan09/07/08 21:41:58 31TA5620_322

If the reserve tank is completely empty, you should also check the coolant level in the radiator.

RADIATOR CAP

Engine Coolant

Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.

Always let the engine and radiator cool down before removing the radiator cap.