You may also be interested in...
Download PDF Manual

airbag system. Have the vehicle checked by the dealer as soon as possible.


The passenger airbag off indicator may also come on and off repeatedly if total weight on the seat is near the airbag cutoff threshold.


If this happens, have the passenger ride properly restrained in a back seat. If the passenger must ride in front, move the seat as far to the rear as possible, have the passenger sit upright and wear the seat belt properly.


32


Main MenuTable of Contentsst 05/06/03 09:29:04 31SDA630 0036 


Additional Information About Your Airbags


Additional Safety Precautions


Donotattempttodeactivateyour airbags. seat belts provide the best protection.


Together, airbags and


Donottamperwithairbag componentsorwiringforany Tampering could cause reason. the airbags to deploy, possibly causing very serious injury.


Donotremoveormodifyafront seatwithoutconsultingyour This could make the dealer. driver’s seat position sensor or the front passenger’s weight sensors ineffective. If it is necessary to remove or modify a front seat to accommodate a person with disabilities, first contact Honda Automobile Customer Service at (800) 999-1009.


Donotcoverorreplacefrontseat- backcoverswithoutconsulting Improperly replacing yourdealer. or covering front seat-back covers can prevent your side airbags from inflating during a side impact.


33


Main MenuTable of Contentsst 05/06/03 09:29:11 31SDA630 0037 


Protecting Children General Guidelines



All Children Must Be Restrained Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained. In fact, vehicle accidents are the number one cause of the death of children ages 12 and under.


To reduce the number of child deaths and injuries, every state and Canadian province requires that infants and children be properly restrained when they ride in a vehicle.


Infantsandsmallchildrenmustbe restrainedinanapprovedchildseat thatisproperlysecuredtothe vehicle


(see pages


47


38


).



Children who are unrestrained or improperly restrained can be seriously injured or killed in a crash.


Any child too small for a seat belt should be properly restrained in a child seat. A larger child should be properly restrained with a seat belt and use a booster seat if necessary.


Largerchildrenmustberestrained withalap/shoulderbeltandrideon aboosterseatuntiltheseatbeltfits ). themproperly


(see pages


51


48



Children depend on adults to protect them. However, despite their best intentions, many adults do not know how to passengers.


protect child


properly


If you have children, or ever need to drive with a child in your vehicle, be sure to read this section. It begins with important general guidelines, then presents special information for infants, small children, and larger children.


34


Main MenuTable of Contentsst 05/06/03 09:29:21 31SDA630 0038 


Protecting Children General Guidelines



All Children Should Sit in a Back Seat According to accident statistics, children of all ages and sizes are safer when they are restrained in a back seat.


The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a back seat. Some states have laws restricting where children may ride.


Children who ride in back are less likely to be injured by striking interior vehicle parts during a collision or hard braking. Also, children cannot be injured by an inflating front airbag when they ride in the back.


The Passenger’s Front Airbag Poses Serious Risks Front airbags have been designed to help protect adults in a moderate to severe frontal collision. To do this, the passenger’s front airbag is quite large, and it can inflate with enough force to cause very serious injuries.


Even though your vehicle has an advanced front airbag system, which can automatically turn the passenger’s front airbag off (see page guidelines below.


), please follow the


27


Infants Neverputarear-facingchildseatin thefrontseatofavehicleequipped If withapassenger’sfrontairbag. the airbag inflates, it can hit the back of the child seat with enough force to kill or very seriously injure an infant.


SmallChildren Placingaforward-facingchildseatin thefrontseatofavehicleequipped withapassenger’sfrontairbagcan If the vehicle seat is behazardous. too far forward, or the child’s head is thrown forward during a collision, an inflating front airbag can strike the child with enough force to kill or very seriously injure a small child.


Whenever possible,


LargerChildren Childrenwhohaveoutgrownchild seatsarealsoatriskofbeinginjured orkilledbyaninflatingpassenger’s frontairbag. larger children should sit in the back seat, on a booster seat if needed, and be properly restrained with a seat belt (see page information about protecting larger children).


for important


48


CONTINUED


35


Main MenuTable of Contentsst 05/06/03 09:29:35 31SDA630 0039 


Protecting Children General Guidelines



U.S.Models SUN VISOR


DASHBOARD


To remind you of the passenger’s front airbag hazards, and that children must be properly restrained in a back seat, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels.


CanadianModels


SUN VISOR


36


Main MenuTable of Contentsst 05/06/03 09:29:44 31SDA630 0040 


Protecting Children General Guidelines



If You Must Drive with Several Children Your vehicle has a back seat where children can be properly restrained. If you ever have to carry a group of children, and a child must ride in front:


If a Child Requires Close Attention Many parents say they prefer to put an infant or small child in the front passenger seat so they can watch the child, or because the child requires attention.


Place the largest child in the front seat, provided the child is large enough to wear the lap/shoulder belt properly (see page


48


).


Move the vehicle seat as far to the rear as possible (see page


13


).


Have the child sit upright and well backintheseat(seepage


16


).


Make sure the seat belt is properly positioned and secured (see page 16


).


Placing a child in the front seat exposes the child to hazards in a frontal collision, and paying close attention to a child distracts the driver from the important tasks of driving, placing both of you at risk.


If a child requires close physical attention or frequent visual contact, we strongly recommend that another adult ride with the child in a back seat. The back seat is far safer for a child than the front.


Additional Safety Precautions


Neverholdaninfantorchildon If you are not wearing a yourlap. seat belt in crash, you could be thrown forward and crush the child against the dashboard or a seat-back. If you are wearing a seat belt, the child can be torn from your arms and be seriously hurt or killed.


Neverputaseatbeltoveryourself andachild. belt could press deep into the child and cause serious or fatal injuries.


During a crash, the


Neverlettwochildrenusethe If they do, they sameseatbelt. could be very seriously injured in a crash.


37


Main MenuTable of Contentsst 05/06/03 09:29:52 31SDA630 0041 


Protecting Children General Guidelines, Protecting Infants and Small Children



Usechildproofdoorlocksto preventchildrenfromopeningthe This can prevent children doors. from accidentally falling out (see page


78


).


Donotleavechildrenaloneina Leaving children without vehicle. adult supervision is illegal in most states and Canadian provinces, and can be very hazardous.


For example, infants and small childrenleftinavehicleonahot day can die from heatstroke. A child left alone with the key in the ignition can accidentally set the vehicle in motion, possibly injuring themselves or others.


38


Protecting Infants


Lockalldoorsandthetrunkwhen Children yourvehicleisnotinuse. who play in vehicles can accidentally get trapped inside. Teach your children not to play in or around vehicles. Know how to operate the emergency trunk opener and decide if your children should be shown how to use this feature(seepage


83


).


Even very young


Keepvehiclekeysandremote transmittersoutofthereachof children. children learn how to unlock vehicle doors, turn on the ignition switch, and open the trunk, which can lead to accidental injury or death.


ChildSeatType An infant must be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker’s weight or height limit for the seat and the child is at least one year old.


Only a rear-facing child seat provides proper support for a baby’s head, neck, and back.


Main MenuTable of Contentsst 05/06/03 09:29:59 31SDA630 0042 


Two types of seats may be used: a seat designed exclusively for infants, or a convertible seat used in the rear- facing, reclining mode.


Donotputarear-facingchildseatin If placed aforward-facingposition. facing forward, an infant could be very seriously injured during a frontal collision.


Protecting Infants and Small Children


ChildSeatPlacement A rear-facing child seat can be placed in any seating position in the back seat, but not in the front. rear-facingchildseatinthefront seat.


Neverputa


If the passenger’s front airbag inflates, it can hit the back of the child seat with enough force to kill or seriously injure an infant.


When properly installed, a rear- facing child seat may prevent the driver or a front passenger from moving their seat as far back as recommended, or from locking their seat-back in the desired position.


It could also interfere with proper operation of the passenger’s advanced front airbag system.


In any of these situations, we strongly recommend that you install the child seat directly behind the front passenger’s seat, move the seat as far forward as needed, and leave it unoccupied. Or, you may wish to get a smaller rear-facing child seat.


Placing a rear-facing child seat in the front seat can result in serious injury or death during a collision.


Always place a rear-facing child seat in the back seat, not the front.


39


Main MenuTable of Contentsst 05/06/03 09:30:07 31SDA630 0043 


Protecting Infants and Small Children


Protecting Small Children


We also recommend that a small child use the child seat until the child reaches the weight or height limit for the seat.


ChildSeatPlacement We strongly recommend placing a forward-facing child seat in a back seat, not the front.


If the vehicle seat is too


Placingaforward-facingchildseatin thefrontseatofavehicleequipped withapassenger’sairbagcanbe hazardous. far forward, or the child’s head is thrown forward during a collision, an inflating airbag can strike the child with enough force to cause very serious or fatal injuries.


Even with advanced front airbags, which can automatically turn the passenger’s front airbag off (see page place for a small child.


), a back seat is the safest


27


ChildSeatType A child who is at least 1 year old, and who fits within the child seat maker’s weight and height limits, should be restrained in a forward-facing, upright child seat.


Of the different seats available, we recommend those that have a five- point harness system as shown.


40


Main MenuTable of Contentsst 05/06/03 09:30:16 31SDA630 0044 


Protecting Infants and Small Children, Selecting a Child Seat


If it is necessary to put a forward- facing child seat in the front, move the vehicle seat as far to the rear as possible, and be sure the child seat is firmly secured to the vehicle and the child is properly strapped in the seat.


Selecting a Child Seat When buying a child seat, you need to choose either a conventional child seat, or one designed for use with the lower anchors and tethers for children (LATCH) system.


Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inflates.


If you must place a forward- facing child seat in front, move the vehicle seat as far back as possible, and properly restrain the child.


Conventional child seats must be secured to a vehicle with a seat belt, whereas LATCH-compatible seats are secured by attaching the seat to hardware built into the two second- row seats.


Since LATCH-compatible child seats are easier to install and reduce the possibility of improper installation, we recommend selecting this style.


We also recommend selecting a LATCH-compatible seat with a rigid, rather than a flexible, anchor (see page


43


).


In seating positions and vehicles not equipped with LATCH, a LATCH- compatible child seat can be installed using a seat belt.


Whatever type of seat you choose, to provide proper protection, a child seat should meet three requirements:


1.


2.


ThechildseatshouldmeetU.S.or CanadianMotorVehicleSafety Look for FMVSS Standard213. 213 or CMVSS 213 on the box.


Thechildseatshouldbeofthe propertypeandsizetofitthechild. Rear-facing for infants, forward- facing for small children.


CONTINUED


41


Main MenuTable of Contentsst 05/06/03 09:30:24 31SDA630 0045 


Selecting a Child Seat, Installing a Child Seat


3.


Thechildseatshouldfitthe vehicleseatingposition(or positions)whereitwillbeused.


Before purchasing a conventional child seat, or using a previously purchased one, we recommend that you test the seat in the specific vehicle seating position, or positions, where the seat will be used.


42


Installing a Child Seat After selecting a proper child seat and a good place to install the seat, there are three main steps in installing the seat:


1.


Properlysecurethechildseatto All child seats must be thevehicle. secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH (lower anchors and tethers for children) system. A child whose seat is not properly secured to the vehicle can be endangered in a crash.


2.


After installing a child


Makesurethechildseatisfirmly secured. seat, push and pull the seat forward and from side-to-side to verify that it is secure.


A child seat secured with a seat belt should be installed as firmly as possible. However, it does not need to be ‘‘rock solid.’’ Some side-to-side


movement can be expected and should not reduce the child seat’s effectiveness.


If the child seat is not secure, try installing it in a different seating position, or use a different style of child seat that can be firmly secured.


3.


Securethechildinthechildseat. Make sure the child is properly strapped in the child seat according to the child seat maker’s instructions. A child who is not properly secured in a child seat can be seriously injured in a crash.


The following pages provide guidelines on how to properly install a child seat. A forward-facing child seat is used in all examples, but the instructions are the same for rear- facing child seats.


Main MenuTable of Contentsst 05/06/03 09:30:32 31SDA630 0046 


Installing a Child Seat


Installing a Child Seat with LATCH Your vehicle is equipped with LATCH (lower anchors and tethers for children) at the outer rear seats.


The lower anchors are located between the seat-back and seat bottom, and are to be used only with a child seat designed for use with LATCH.


The location of each lower anchor is indicated by a small button above the anchor point.


LOWER ANCHOR MARKS


Rigid type


To install a LATCH-compatible child seat:


1.


2.


Move the seat belt buckle or tongue away from the lower anchors.


Make sure there are no objects near the anchors that could prevent a secure connection between the child seat and the anchors.


3.


Place the child seat on the vehicle seat, then attach the seat to the lower anchors according to the child seat maker’s instructions.


Some LATCH-compatible seats have a rigid-type connection as shown above.


43


Main MenuTable of Contentsst 05/06/03 09:30:39 31SDA630 0047 


Installing a Child Seat


TETHER STRAP HOOK


7.


Push and pull the child seat forward and from side-to-side to verify that it is secure.


Flexible type


ANCHOR


Other LATCH-compatible seats have a flexible-type connection as shown above.


4.


Whatever type you have, follow the child seat maker’s instructions for adjusting or tightening the fit.


5.


Lift the head restraint (see page ), then route the tether strap 87
through the legs of the head restraint, making sure the strap is not twisted.


6.


Attach the tether strap hook to the tether anchor, then tighten the strap as instructed by the child seat maker.


44


Main MenuTable of Contentsst 05/06/03 09:30:45 31SDA630 0048 


Installing a Child Seat


Installing a Child Seat with a Lap/ Shoulder Belt When not using the LATCH system, all child seats must be secured to the vehicle with the lap part of a lap/ shoulder belt.


In addition, the lap/shoulder belts in all seating positions except the driver’s have a locking mechanism that must be activated to secure a child seat.


1.


With the child seat in the desired seating position, route the belt through the child seat according to the seat maker’s instructions, then insert the latch plate into the buckle.


2.


3.


To activate the lockable retractor, slowly pull the shoulder part of the belt all the way out until it stops, then let the belt feed back into the retractor.


After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked, and you will need to repeat these steps.


45


Main MenuTable of Contentsst 05/06/03 09:30:51 31SDA630 0049 


Installing a Child Seat


To deactivate the locking mechanism and remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract.


5.


Push and pull the child seat forward and from side-to-side to verify that it is secure enough to stay upright during normal driving maneuvers. If the child seat is not secure, unlatch the belt, allow it to retract fully, then repeat these steps.


4.


After confirming that the belt is locked, grab the shoulder part of the belt near the buckle, and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure.


To remove slack, it may help to put weight on the child seat, or push on the back of the seat while pulling up on the belt.


46


Main MenuTable of Contentsst 05/06/03 09:31:01 31SDA630 0050 


Installing a Child Seat with a Tether


UsinganOuterAnchor


UsingtheCenterAnchor


TETHER STRAP HOOK


TETHER STRAP HOOK


Installing a Child Seat


TETHER ANCHORAGE POINTS


A child seat with a tether can be installed in any seating position in the back seat, using one of the anchorage points shown above.


Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available.


ANCHOR


ANCHOR


1.


2.


3.


43


After properly securing the child seat (see page ), lift the head restraint, then route the tether strap through the head restraint legs. Lift the anchor cover, then attach the tether strap hook to the anchor, making sure the strap is not twisted. Tighten the strap according to the seat maker’s instructions.


1.


After properly securing the child seat (see page ), route the tether strap through the head restraint, and over the seat-back.


45


2.


Follow steps 2 and 3 from the previous column.


47


Main MenuTable of Contentsst 05/06/03 09:31:09 31SDA630 0051 


Protecting Larger Children


When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit in a back seat on a booster seat and wear a lap/shoulder belt.


The following pages give instructions on how to check proper seat belt fit, what kind of booster seat to use if one is needed, and important precautions for a child who must sit in front.


Allowing a child age 12 or under to sit in front can result in injury or death if the passenger’s front airbag inflates.


If a larger child must ride in front, move the vehicle seat as far back as possible, use a booster seat if needed, have the child sit up properly and wear the seat belt properly.


48


CheckingSeatBeltFit


To determine if a lap/shoulder belt properly fits a child, have the child put on the seat belt, then ask yourself:


1.


Does the child sit all the way back against the seat?


2.


Do the child’s knees bend comfortably over the edge of the seat?


Main MenuTable of Contentsst 05/06/03 09:31:17 31SDA630 0052 


3.


Does the shoulder belt cross between the child’s neck and arm?


4.


Is the lap part of the belt as low as possible, touching the child’s thighs?


5.


Will the child be able to stay seated like this for the whole trip?


If you answer yes to all these questions, the child is ready to wear the lap/shoulder belt correctly. If you answer no to any question, the child needs to ride on a booster seat.


Using a Booster Seat


A child who has outgrown a forward- facing child seat should ride in a back seat and use a booster seat until the lap/shoulder belt fits them properly without the booster.


Some states also require children to use a booster seat until they reach a given age or weight (e.g., 6 years or 60 lbs). Be sure to check current laws in the state or states where you intend to drive.


Protecting Larger Children


Booster seats can be high-back or low-back. Whichever style you select, make sure the booster meets federal safety standards (see page ) and that you follow the booster seat maker’s instructions.


41


If a child who uses a booster seat must ride in front, move the vehicle seat as far to the rear as possible, and be sure the child is wearing the seat belt properly.


A child may continue using a booster seat until the tops of the ears are even with the top of the seat-back. A child of this height should be tall enough to use the lap/shoulder belt without a booster.


49


Main MenuTable of Contentsst 05/06/03 09:31:27 31SDA630 0053 


Protecting Larger Children


When Can a Larger Child Sit in Front The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a back seat.


If the passenger’s front airbag inflates in a moderate to severe frontal collision, the airbag can cause serious injuries to a child who is unrestrained, improperly restrained, sitting too close to the airbag, or out of position.


A side airbag also poses risks. If any part of a larger child’s body is in the path of a deploying side airbag, the child could receive possibly serious injuries.


50


Of course, children vary widely. And while age may be one indicator of when a child can safely ride in front, there are other important factors you should consider.


PhysicalSize Physically, a child must be large enough for the lap/shoulder belt to properly fit (see page belt does not fit properly, with or without the child sitting on a booster seat, the child should not sit in front.


). If the seat


48


Maturity To safely ride in front, a child must be able to follow the rules, including sitting properly, and wearing the seat belt properly throughout a ride.


If you decide that a child can safely ride up front, be sure to:


Carefully read the owner’s manual, and make sure you understand all seat belt instructions and all safety information.


Move the vehicle seat to the rear- most position.


Have the child sit up straight, back against the seat, and feet on or near the floor.


Check that the child’s seat belt is properly and securely positioned.


Supervise the child. Even mature children sometimes need to be reminded to fasten the seat belts or sit properly.


Main MenuTable of Contentsst 05/06/03 09:31:32 31SDA630 0054 


Protecting Larger Children


Devices intended to


Donotputanyaccessoriesona seatbelt. improve a child’s comfort or reposition the shoulder part of a seat belt can make the belt less effective and increase the chance of serious injury in a crash.


Additional Safety Precautions


Donotletachildwearaseatbelt This could result acrosstheneck. in serious neck injuries during a crash.


This could


Donotletachildputtheshoulder partofaseatbeltbehindtheback orunderthearm. cause very serious injuries during a crash. It also increases the chance that the child will slide under the belt in a crash and be injured.


Twochildrenshouldneverusethe sameseatbelt. could be very seriously injured in a crash.


If they do, they


51


Main MenuTable of Contentsst 05/06/03 09:31:39 31SDA630 0055 


Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and even kill you.


Avoid any enclosed areas or activities that expose you to carbon monoxide.


High levels of carbon monoxide can collect rapidly in enclosed areas, such as a garage. Do not run the engine with the garage door closed. Even with the door open, run the engine only long enough to move the vehicle out of the garage.


With the trunk open, airflow can pull exhaust gas into your vehicle’s interior and create a hazardous condition. If you must drive with the trunk open, open all the windows and set the climate control system as shown below.


If you must sit in your parked vehicle with the engine running, even in an unconfined area, adjust the climate control system as follows:


1. 2. 3. 4.


Select the fresh air mode. Select the Turn the fan on high speed. Set the temperature control to a comfortable setting.


mode.


Carbon Monoxide Hazard


Your vehicle’s exhaust contains carbon monoxide gas. You should have no problem with carbon monoxide entering the vehicle in normal driving if you maintain your vehicle properly.


Have the exhaust system inspected for leaks whenever:


The vehicle is raised for an oil change.


You notice a change in the sound of the exhaust.


The vehicle was in an accident that may have damaged the underside.


52


Main MenuTable of Contentsst 05/06/03 09:32:11 31SDA630 0056 


These labels are in the locations shown. They warn you of potential hazards that could cause serious injury or death. Read these labels carefully. If a label comes off or becomes hard to read (except for the U.S. dashboard label which is removed by the owner), contact your dealer for a replacement. HOOD U.S.models


DASHBOARD U.S.modelsonly


SUN VISOR U.S.models


Canadianmodels


Canadianmodels


RADIATOR CAP


Safety Labels


DOORJAMBS U.S.models


Canadianmodels


53


Main MenuTable of Contentsst 05/06/03 09:32:19 31SDA630 0058 


Instruments and Controls


This section gives information about the controls and displays that contribute to the daily operation of your vehicle. All the essential controls are within easy reach.


Control Locations Instrument Panel Instrument Panel Indicators Gauges


........................... ............................ .......... .............................................


. 56
. 57
. 58
. 64


Odometer/Outside


Temperature Display


. 64
. 64
Odometer Outside Temperature Display . 64


............. ..................................... ...


Trip Meter Temperature Gauge Fuel Gauge Check Fuel Cap Indicator Controls Near the Steering


................................... ................... .................................. ..........


Wheel


........................................... ...................... ...........


Wipers and Washers Turn Signal and Headlights Automatic Lighting Off


Feature


Daytime Running Lights Instrument Panel Brightness Hazard Warning Rear Window Defogger Steering Wheel Adjustment Keys and Locks Immobilizer System Ignition Switch Door Locks Childproof Door Locks Remote Transmitter Trunk


......................................... ................ ........ .............................. ................. .......... ............................... ........................ ................................ ...................................... .................. ....................... ................................................ ........ .................................... ................................................. .............


Emergency Trunk Opener


Seat Heaters Seats


Power Seat Adjustment


. 65
. 65
. 66
. 66


. 67
. 68
. 69


. 70
. 70
. 71
. 71
. 72
. 73
. 74
. 75
. 76
. 77
. 78
. 78
. 82
. 83
. 84
. 85
. 85


Driver’s Lumbar Support Front Seat Adjustments Driver’s Seat Manual Height


........... .............


. 85
. 86


Adjustment


..............................


. 86


Driver’s Seat Power Height


Adjustment


Head Restraints Folding Rear Seat


.............................. .......................... ....................... ............................................. .... ..............................


Adjusting the Power Mirrors


Power Windows


Mirrors


. 87
. 87
. 88
. 90
. 90
. 91


Power Window Control


Operations


Moonroof Parking Brake Sun Visor Vanity Mirror Interior Lights Ceiling Light Individual Interior Lights Interior Convenience Items


............................... ......................................... ................................. .......................................... .................................. ................................. ................................ ........... ........... ....................... .......... ............... .................... ..................................


Beverage Holders Accessory Power Sockets Console Compartment Sunglasses Holder Glove Box


. 93
. 94
. 95
. 96
. 96
. 97
. 97
. 97
. 98
. 99
. 99
. 99
. 100
. 100


55


Main Menust 05/06/03 09:32:25 31SDA630 0059 


Control Locations


INDICATORS GAUGES


(P.64)


(P.58)


MOONROOF SWITCH (P.94)


MIRROR CONTROLS (P.90)


POWER DOOR LOCK MASTER SWITCH (P.77)


CRUISE CONTROLS


(P.145)


HAZARD WARNING BUTTON (P.71)


AUDIO SYSTEM (P.114)


HEATING/COOLING CONTROLS (P.102) CLIMATE CONTROL SYSTEM (P.109)


SHIFT LEVER (P.170, 173)


TRUNK RELEASE LEVER (P.82) FUEL FILL DOOR RELEASE LEVER (P.156)


HOOD RELEASE HANDLE (P.157)


PARKING BRAKE LEVER (P.95)


ACCESSORY POWER SOCKETS (P.99)


56


Main MenuTable of Contentsst 05/06/03 09:32:33 31SDA630 0060 


IMMOBILIZER SYSTEM INDICATOR


(P.63)


LIGHTS-ON INDICATOR


(P.61)


MALFUNCTION INDICATOR LAMP


(P.58)


CHARGING SYSTEM INDICATOR


(P.58)


LOW OIL PRESSURE INDICATOR


(P.58)


Instrument Panel


VSA ACTIVATION INDICATOR


(P.60)


CRUISE CONTROL MAIN INDICATOR


(P.63)


VEHICLE STABILITY ASSIST (VSA) SYSTEM INDICATOR


(P.60)


LOW FUEL INDICATOR


(P.61)


CRUISE CONTROL INDICATOR


(P.63)


ANTI-LOCK BRAKE SYSTEM (ABS) INDICATOR


(P.59)


DOOR AND TRUNK OPEN MONITOR


(P.60)


MAINTENANCE MINDER INDICATOR SEAT BELT REMINDER LIGHT


(P.63)


(P.58)


HIGH BEAM INDICATOR PARKING BRAKE AND BRAKE SYSTEM INDICATOR


(P.59)


(P.62)


DAYTIME RUNNING LIGHTS INDICATOR


(P.62)


SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR


(P.59)


SEC URITY SYSTEM INDICATOR


(P.62)


SIDE AIRBAG OFF INDICATOR (P.59)


The U.S. instrument panel is shown. Differences for the Canadian models are noted in the text.


57


Main MenuTable of Contentsst 05/06/03 09:32:42 31SDA630 0061 


If your front passenger does not fasten their seat belt, the indicator comes on about 6 seconds after the ignition switch is turned to the ON (II) position.


If either of you do not fasten your seat belt while driving, the beeper will sound and the indicator will flash again at regular intervals. For more information, see page


.20


Instrument Panel Indicators


The instrument panel has many indicators to give you important information about your vehicle.


Seat Belt Reminder Indicator


This indicator comes on when you turn the ignition switch to the ON (II) position. It reminds you and your passengers to fasten your seat belts. A beeper also sounds if you and your front passenger have not fastened your seat belts.


If you turn the ignition switch to the ON (II) position before fastening your seat belts, the beeper sounds, and the indicator flashes. If you do not fasten your seat belts before the beeper stops, the indicator stops flashing but remains on.


58


Low Oil Pressure Indicator


The engine can be severely damaged if this indicator flashes or stays on when the engine is running. For more information, see page 250


Charging System Indicator


If this indicator comes on when the engine is running, the battery is not being charged. For more information, see page


251


Malfunction Indicator Lamp 251


See page


Main MenuTable of Contentsst 05/06/03 09:32:53 31SDA630 0062 


Instrument Panel Indicators


Supplemental Restraint System Indicator


This indicator comes on briefly when you turn the ignition switch to the ON (II) position. If it comes on at any other time, it indicates a potential problem with your front airbags. This indicator will also alert you to a potential problem with your side airbags, passenger’s side airbag automatic cutoff system, side curtain airbags, automatic seat belt tensioners, driver’s seat position sensor, or the front passenger’s weight sensors. For more information, see page 30


Parking Brake and Brake System Indicator


U.S.


Canada


This indicator has two functions:


1.


2.


Itcomesonwhenyouturnthe ignition switch to the ON (II) position. It is a reminder to check the parking brake. A beeper sounds if you try to drive with the parking brake not fully released. Driving with the parking brake not fully released can damage the brakes and tires.


If it remains lit after you fully release the parking brake while the engine is running, or if it comes on while driving, there could be a problem with the brake system. For more information, see page


253


U.S.


Canada


Side Airbag Off Indicator


This indicator comes on when you turn the ignition switch to the ON (II) position. If it comes on at any other time, it indicates that the passenger’s side airbag has automatically shut off. For more information, see page


31


Anti-lock Brake System (ABS) Indicator


This indicator normally comes on for a few seconds when you turn the ignition switch to ON (II), and when the ignition switch is turned to START (III). If it comes on at any other time, there is a problem with theABS.Ifthishappens,haveyour vehicle checked at a dealer. With this on, your vehicle still has normal braking ability but no anti-lock brakes. For more information, see page


180


59


Main MenuTable of Contentsst 05/06/03 16:43:37 31SDA630 0063 


VSA Activation Indicator


Door and Trunk Open Monitor


This indicator normally comes on for a few seconds when you turn the ignition switch to ON (II). For more information, see page


182


This indicator has three functions:


1.


2.


3.


Itcomesonasareminderthatyou have turned off the vehicle stability assist (VSA) system.


It flashes when VSA is active (see page


182


).


It comes on along with the VSA system indicator if there is a problem with the VSA system.


The appropriate indicator comes on in this monitor if the trunk or either door is not closed tightly.


All the indicators in the monitor come on for a few seconds when you turn the ignition switch to ON (II).


Instrument Panel Indicators


Vehicle Stability Assist (VSA) System Indicator


This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position.


Ifitcomesonandstaysonatany other time, or if it does not come on when you turn the ignition switch to ON (II), there is a problem with the VSA system. Take your vehicle to a dealer to have it checked. Without VSA, your vehicle still has normal driving ability, but will not have VSA traction and stability enhancement. See page for more information on the VSA system.


182


60


Main MenuTable of Contentsst 05/06/03 09:33:11 31SDA630 0064 


Turn Signal and Hazard Warning Indicators


The left or right turn signal indicator blinks when you signal a lane change or turn. If the indicators do not blink, or if they blink rapidly, it usually means one of the turn signal bulbs is burned out (see pages ). Replace the bulb as soon as possible, since other drivers cannot see that you are signaling.


and


221


222


When you turn on the Hazard Warning button, both turn signal indicators blink. All turn signals on the outside of the vehicle should flash.


Instrument Panel Indicators


Lights On Indicator


Low Fuel Indicator


or


This indicator reminds you that the exterior lights are on. It comes on when the light switch is in either the position. If you turn the


ignition switch to the ACCESSORY (I) or the LOCK (0) position without turning off the light switch, this indicator will remain on. A reminder chime will also sound when you open the driver’s door.


LOW FUEL INDICATOR


This indicator is located in the fuel gauge. It comes on as a reminder that you must refuel soon.


When the indicator comes on, there are about 2.72 U.S. gal (10.3 ) of fuel remaining in the tank before the needle reaches E. There is a small reserve of fuel remaining in the tank when the needle does reach E.


61


Main MenuTable of Contentsst 05/06/03 09:33:18 31SDA630 0065 


Instrument Panel Indicators


Security System Indicator U.S.EX,EX-L,LX-V6andEX-V6
CanadianSE,EX-L,SE-V6andEX-V6


SECURITY SYSTEM INDICATOR


‘‘Daytime Running Lights’’ Indicator


If this indicator comes on when the ignition switch is turned to the ON (II) position and the parking brake is released, it means there is a problem in the high beam headlight’s circuit. Have your vehicle checked by your dealer.


This indicator comes on when the security system is set. See page for more information on the 144
security system.


62


High Beam Indicator


This indicator comes on with the high beam headlights. For more information, see page


70


When the daytime running lights (DRL) are on, this indicator comes on with reduced brightness.


Main MenuTable of Contentsst 05/07/01 10:05:16 31SDA630 0066 


Instrument Panel Indicators


Cruise Control Main Indicator


OnlyonmodelsequippedwithCruise ControlSystem This indicator comes on when you turn on the cruise control master button (see page


145


).


Cruise Control Indicator


OnlyonmodelsequippedwithCruise ControlSystem This indicator comes on when you set the cruise control. See page 145
cruise control.


for information on operating the


Maintenance Minder Indicator


This indicator reminds you that it is time to take your vehicle in for scheduled maintenance. The maintenance main items and sub items will be displayed in the information display. See page more information on the maintenance minder.


193


for


Immobilizer System Indicator


This indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. It will gooffifyouhaveinserteda properly-coded ignition key. If it is not a properly-coded key, the indicator will blink and the engine will not start (see page


75


).


This indicator goes off when your dealer resets it after completing the required maintenance service.


This indicator also blinks several times when you turn the ignition switch from the ON (II) position to the ACCESSORY (I) or the LOCK (0) position.


Washer Level Indicator


Canadianmodelsonly This indicator comes on when the washer fluid level is low. Add washer fluidwhenyouseethisindicator come on (see page


208


).


63


Main MenuTable of Contentsst 05/06/03 09:33:40 31SDA630 0067 


Gauges


TACHOMETER


SPEEDOMETER

Loading...
x