2008 GMC Acadia Owners Manual

Download PDF Manual
Gasoline Octane ........................................................ 5-6 Speciﬁcations ............................................... 5-6 Glove Box ..................................................... 2-55 GM Mobility Reimbursement Program .................. 7-6 Headlamps (cont.) Halogen Bulbs ............................................ 5-45 High/Low Beam Changer ................................ 3-9 Head-Up Display (HUD) ................................... 3-20 Heated Seats ................................................... 1-5 Heater ........................................................... 3-26 Heater ........................................................... 3-29 Height Adjuster, Driver Seat ............................... 1-3 High Voltage Devices and Wiring ...................... 5-99 Highbeam On Light ......................................... 3-55 Highway Hypnosis ........................................... 4-15 Hill and Mountain Roads .................................. 4-16 Hood Checking Things Under ................................ 5-12 Release ..................................................... 5-13 Horn ............................................................... 3-6 How to Wear Safety Belts Properly ................... 1-22 Hazard Warning Flashers ................................... 3-6 Head Restraints .............................................. 1-10 Headlamp Aiming ....................................................... 5-45 Headlamps Bulb Replacement ....................................... 5-45 Daytime Running Lamps/Automatic Headlamp System .................................... 3-16 Delayed ..................................................... 3-15 Exterior Lamps ............................................ 3-14 Flash-to-Pass ............................................... 3-9 Ignition Positions ............................................. 2-26 Infants and Young Children, Restraints ............... 1-39 Inﬂation - Tire Pressure ................................... 5-55 Instrument Panel Overview ..................................................... 3-4 Storage Area .............................................. 2-55 Instrument Panel (I/P) Brightness .................................................. 3-17 Cluster ....................................................... 3-40 J Jump Starting ................................................. 5-39 Keyless Entry System ....................................... 2-4 Keys ............................................................... 2-3 Labeling, Tire Sidewall ..................................... 5-49 Lamps Courtesy .................................................... 3-17 Dome ........................................................ 3-17 Dome Lamp Override ................................... 3-17 Reading ..................................................... 3-19 Lap-Shoulder Belt ........................................... 1-30 LATCH System Child Restraints ........................................... 1-47 License Plate Lamps ....................................... 5-46 Liftgate Carbon Monoxide ........................................ 2-13 Liftgate, Power ............................................... 2-14 Light Airbag Readiness ........................................ 3-42 Antilock Brake System Warning ..................... 3-48 Light (cont.) Brake System Warning ................................. 3-47 Charging System ......................................... 3-45 Cruise Control ............................................. 3-55 Engine Coolant Temperature Warning ............. 3-49 Fog Lamp .................................................. 3-55 Highbeam On ............................................. 3-55 Malfunction Indicator .................................... 3-50 Oil Pressure ............................................... 3-54 Passenger Airbag Status Indicator .................. 3-43 Safety Belt Reminders .................................. 3-41 Security ..................................................... 3-54 StabiliTrak® Indicator .................................... 3-48 Tire Pressure .............................................. 3-50 Tow/Haul Mode ........................................... 3-55 Delayed Entry ............................................. 3-18 Delayed Exit ............................................... 3-18 Entry ......................................................... 3-17 Parade Dimming .......................................... 3-18 Lighting Lights Exterior Lamps ............................................ 3-14 Flash-to-Pass ............................................... 3-9 High/Low Beam Changer ................................ 3-9 Loading Your Vehicle ....................................... 4-21 Lockout Protection .......................................... 2-12 Locks Delayed Locking .......................................... 2-11 Door .......................................................... 2-10 Lockout Protection ....................................... 2-12 Power Door ................................................ 2-11 Programmable Automatic Door Locks ............. 2-11 Rear Door Security Locks ............................. 2-11 Loss of Control ............................................... 4-12 Luggage Carrier .............................................. 2-58 Lumbar Manual Controls ............................................ 1-4 Power Controls ............................................. 1-5 Maintenance Schedule Additional Required Services ........................... 6-6 At Each Fuel Fill ........................................... 6-8 At Least Once a Month .................................. 6-9 At Least Once a Year .................................... 6-9 Introduction .................................................. 6-2 Maintenance Footnotes .................................. 6-7 Maintenance Record .................................... 6-16 Maintenance Replacement Parts .................... 6-14 Maintenance Requirements ............................. 6-2 Owner Checks and Services ........................... 6-8 Recommended Fluids and Lubricants ............. 6-12 Maintenance Schedule (cont.) Scheduled Maintenance ................................. 6-4 Using .......................................................... 6-2 Your Vehicle and the Environment ................... 6-2 Malfunction Indicator Light ................................ 3-50 Manual Lumbar Controls .................................... 1-4 Manual Seats ................................................... 1-2 Manual, Using .................................................... iii Memory Seat and Mirrors .................................. 1-6 Message DIC Warnings and Messages ........................ 3-66 Mirrors Automatic Dimming Rearview with OnStar® and Compass .......................................... 2-40 Manual Rearview Mirror with OnStar® ............. 2-40 Outside Convex Mirror ................................. 2-44 Outside Heated Mirrors ................................ 2-44 Outside Power Foldaway Mirrors .................... 2-43 Outside Power Mirrors .................................. 2-42 MP3 .................................................. 3-104, 3-108 MyGMLink.com ................................................ 7-4 Navigation System, Privacy .............................. 7-17 Navigation/Radio System, see Navigation Manual ..................................................... 3-115 New Vehicle Break-In ...................................... 2-25 O Odometer ...................................................... 3-41 Off-Road Recovery .......................................... 4-11 Oil Engine ....................................................... 5-15 Pressure Light ............................................. 3-54 Oil, Engine Oil Life System .............................. 5-18 Older Children, Restraints ................................ 1-36 Online Owner Center ........................................ 7-4 OnStar, Privacy .............................................. 7-17 OnStar® System, see OnStar® Manual ............... 2-47 Operation, Universal Home Remote System ........ 2-51 Orange Covered Wiring ................................... 5-99 Other Warning Devices ...................................... 3-6 Outlet Adjustment ............................................ 3-36 Outlets Accessory Power ......................................... 3-24 Outside Convex Mirror ............................................. 2-44 Heated Mirrors ............................................ 2-44 Power Foldaway Mirrors ............................... 2-43 Power Mirrors ............................................. 2-42 Overheated Engine Protection Operating Mode ... 5-26 Owner Checks and Services .............................. 6-8 Owners, Canadian ............................................... ii Paint, Damage ............................................... 5-95 Parade Dimming ............................................. 3-18 Park Aid ................................................ 2-45, 2-47 Park Brake .................................................... 2-35 Park (P) Shifting Into ................................................ 2-36 ............................................ 2-37 Shifting Out of Parking Assist ........................................................ 2-45 Over Things That Burn ................................. 2-38 Passenger Airbag Status Indicator ..................... 3-43 Passenger Sensing System .............................. 1-70 Passing ......................................................... 4-11 PASS-Key® III+ .............................................. 2-23 PASS-Key® III+ Operation ................................ 2-23 Perchlorate Materials Requirements, California ...... 5-4 Power Door Locks ................................................. 2-11 Electrical System ....................................... 5-100 Liftgate ...................................................... 2-14 Lumbar Controls ........................................... 1-5 Outlet 115 Volt Alternating Current ................. 3-25 Retained Accessory (RAP) ............................ 2-27 Seat ............................................................ 1-3 Power (cont.) Steering Fluid ............................................. 5-33 Tilt Wheel and Telescopic Steering Column ....... 3-7 Windows .................................................... 2-19 Privacy .......................................................... 7-15 Event Data Recorders .................................. 7-16 Navigation System ....................................... 7-17 OnStar ....................................................... 7-17 Radio Frequency Identiﬁcation ....................... 7-17 Programmable Automatic Door Locks ................. 2-11 Radiator Pressure Cap .................................... 5-24 Radio Frequency Identiﬁcation (RFID), Privacy .... 7-17 Radios .......................................................... 3-84 Radio(s) ........................................................ 3-87 Radios Navigation/Radio System, see Navigation Manual ................................................. 3-115 Rear Audio Controller (RAC) ........................ 3-127 Rear Seat Audio ........................................ 3-125 Reception ................................................. 3-129 Setting the Time .......................................... 3-85 Theft-Deterrent .......................................... 3-127 Reading Lamps .............................................. 3-19 Rear Air Conditioning and Heating System ......... 3-36 Rear Air Conditioning and Heating System and Electronic Climate Controls ..................... 3-38 Rear Audio Controller (RAC) ........................... 3-127 Rear Door Security Locks ................................ 2-11 Rear Seat Armrest .......................................... 2-58 Rear Seat Audio (RSA) .................................. 3-125 Rear Seat Entertainment System ..................... 3-115 Rear Seat Operation ....................................... 1-11 Rear Vision Camera ........................................ 2-47 Rear Windshield Washer/Wiper ......................... 3-11 Rearview Mirror, Automatic Dimming with OnStar® and Compass ................................. 2-40 Rearview Mirror with OnStar® ........................... 2-40 Reclining Seatbacks .......................................... 1-8 Recommended Fluids and Lubricants ................. 6-12 Recreational Vehicle Towing ............................. 4-26 Remote Keyless Entry (RKE) System .................. 2-4 Remote Keyless Entry (RKE) System, Operation ..... 2-5 Remote Vehicle Start ........................................ 2-7 Removing the Flat Tire and Installing the Spare Tire .................................................. 5-76 Removing the Spare Tire and Tools ................... 5-73 Replacement Bulbs ......................................... 5-46 Replacement Parts, Maintenance ...................... 6-14 Reporting Safety Defects Canadian Government .................................. 7-14 General Motors ........................................... 7-14 United States Government ............................ 7-13 10 Restraint System Check Checking the Restraint Systems .................... 1-77 Replacing Restraint System Parts After a Crash .................................................. 1-78 Retained Accessory Power (RAP) ...................... 2-27 Roadside Assistance Program ....................................... 7-6 Rocking Your Vehicle to Get it Out .................... 4-21 Routing, Engine Drive Belt ............................... 6-15 Running the Engine While Parked ..................... 2-39 Safety Belt Safety Belts Reminder Light ............................................ 3-41 Care of ...................................................... 5-92 How to Wear Safety Belts Properly ................ 1-22 Lap-Shoulder Belt ........................................ 1-30 Safety Belt Extender .................................... 1-36 Safety Belt Use During Pregnancy ................. 1-35 Safety Belts Are for Everyone ....................... 1-16 Safety Warnings and Symbols .............................. iii Scheduled Maintenance ..................................... 6-4 Seats Driver Seat Height Adjuster ............................. 1-3 Head Restraints .......................................... 1-10 Seats (cont.) Heated Seats ............................................... 1-5 Manual Lumbar ............................................. 1-4 Memory, Mirrors ............................................ 1-6 Power Lumbar .............................................. 1-5 Power Seats ................................................. 1-3 Rear Seat Operation .................................... 1-11 Reclining Seatbacks ...................................... 1-8 Third Row Seat ........................................... 1-13 Second Row Center Console ............................ 2-56 Secondary Latch System ................................. 5-81 Securing a Child Restraint Rear Seat Position ...................................... 1-55 Right Front Seat Position .............................. 1-58 Security Light ................................................. 3-54 Service ........................................................... 5-3 Accessories and Modiﬁcations ......................... 5-4 Adding Equipment to the Outside of Your Vehicle ..................................................... 5-6 California Pershlorate Materials Requirements ..... 5-4 California Proposition 65 Warning .................... 5-4 Doing Your Own Work ................................... 5-5 Engine Soon Light ....................................... 3-50 Publications Ordering Information ................... 7-14 Service, Scheduling Appointments ....................... 7-8 Servicing Your Airbag-Equipped Vehicle .............. 1-75 Sheet Metal Damage ....................................... 5-95 11 Shifting Into Park (P) ....................................... 2-36 Shifting Out of Park (P) ................................... 2-37 Signals, Turn and Lane-Change .......................... 3-8 Spare Tire Compact .................................................... 5-88 Installing .................................................... 5-76 Removing ................................................... 5-73 Storing ....................................................... 5-84 Speciﬁcations, Capacities ............................... 5-107 Speedometer .................................................. 3-41 StabiliTrak® System .......................................... 4-6 StabiliTrak® Indicator Light ................................ 3-48 Start Vehicle, Remote ....................................... 2-7 Starting the Engine ......................................... 2-27 Steering .......................................................... 4-9 Steering Wheel Controls, Audio ....................... 3-128 Steering Wheel, Power Tilt Wheel and Telescopic Steering Column ............................ 3-7 Steering Wheel, Tilt and Telescopic ..................... 3-6 Storage Areas Cargo Management System .......................... 2-59 Center Console Storage Area ........................ 2-56 Convenience Net ......................................... 2-58 Cupholder(s) ............................................... 2-55 Glove Box .................................................. 2-55 Instrument Panel Storage Area ...................... 2-55 Luggage Carrier .......................................... 2-58 12 Storage Areas (cont.) Rear Seat Armrest ....................................... 2-58 Second Row Center Console ........................ 2-56 Stuck in Sand, Mud, Ice, or Snow ..................... 4-20 Sun Visors ..................................................... 2-21 Sunroof ......................................................... 2-60 Tachometer .................................................... 3-41 Telescopic Steering Column, Power Tilt Wheel ...... 3-7 Telescopic Wheel .............................................. 3-6 Theft-Deterrent, Radio .................................... 3-127 Theft-Deterrent Systems ................................... 2-21 Content Theft-Deterrent ................................ 2-21 PASS-Key® III+ ........................................... 2-23 PASS-Key® III+ Operation ............................. 2-23 Tilt Wheel ........................................................ 3-6 Time, Setting .................................................. 3-85 Tire Pressure Light ............................................. 3-50 Tires ............................................................. 5-48 Aluminum or Chrome-Plated Wheels, Cleaning ................................................. 5-94 Buying New Tires ........................................ 5-64 Chains ....................................................... 5-70 Tires (cont.) Changing a Flat Tire .................................... 5-72 Cleaning .................................................... 5-95 Compact Spare Tire ..................................... 5-88 Different Size .............................................. 5-66 If a Tire Goes Flat ....................................... 5-71 Inﬂation - Tire Pressure ................................ 5-55 Inspection and Rotation ................................ 5-62 Installing the Spare Tire ................................ 5-76 Pressure Monitor Operation ........................... 5-58 Pressure Monitor System .............................. 5-57 Removing the Flat Tire ................................. 5-76 Removing the Spare Tire and Tools ............... 5-73 Secondary Latch System .............................. 5-81 Storing a Flat or Spare Tire and Tools ............ 5-84 Tire Sidewall Labeling .................................. 5-49 Tire Terminology and Deﬁnitions .................... 5-52 Uniform Tire Quality Grading ......................... 5-67 Wheel Alignment and Tire Balance ................. 5-68 Wheel Replacement ..................................... 5-68 When It Is Time for New Tires ...................... 5-63 Tow/Haul Mode ............................................... 2-34 Tow/Haul Mode Light ....................................... 3-55 Towing Recreational Vehicle ..................................... 4-26 Towing a Trailer .......................................... 4-30 Your Vehicle ............................................... 4-26 Traction Transmission StabiliTrak® System ....................................... 4-6 Fluid, Automatic ........................................... 5-21 Transmission Operation, Automatic .................... 2-30 Turn and Lane-Change Signals .......................... 3-8 Turn Signal/Multifunction Lever ........................... 3-8 Ultrasonic Rear Parking Assist (URPA) ............... 2-45 Uniform Tire Quality Grading ............................ 5-67 Universal Home Remote System ....................... 2-50 Operation ................................................... 2-51 Using this Manual ............................................... iii Vehicle Control ........................................................ 4-3 Damage Warnings ........................................... iv Loading ...................................................... 4-21 Symbols ......................................................... iv Vehicle Customization, DIC .............................. 3-75 Vehicle Data Recording and Privacy .................. 7-15 13 Vehicle Identiﬁcation Number (VIN) ............................................. 5-98 Service Parts Identiﬁcation Label ................... 5-98 Vehicle, Remote Start ....................................... 2-7 Ventilation Adjustment ...................................... 3-36 Visors ........................................................... 2-21 Voltage Devices, High and Wiring ..................... 5-99 Voltmeter Gage .............................................. 3-46 Warning Lights, Gages and Indicators ................ 3-39 Warnings DIC Warnings and Messages ........................ 3-66 Hazard Warning Flashers ............................... 3-6 Other Warning Devices .................................. 3-6 Safety and Symbols ......................................... iii Vehicle Damage .............................................. iv Wheels Alignment and Tire Balance .......................... 5-68 Different Size .............................................. 5-66 Replacement ............................................... 5-68 Where to Put the Restraint ............................... 1-46 Windows ....................................................... 2-18 Power ........................................................ 2-19 Windshield Backglass, and Wiper Blades, Cleaning .......... 5-94 Washer ...................................................... 3-10 Washer Fluid .............................................. 5-34 Wiper Blade Replacement ............................. 5-47 Wiper Fuses ............................................. 5-100 Wipers ......................................................... 3-9 Windshield, Rear Washer/Wiper ........................ 3-11 Winter Driving ................................................ 4-17 Wiring, High Voltage Devices ............................ 5-99 XM Radio Messages ..................................... 3-113 Your Vehicle and the Environment ....................... 6-2 14 2008 GMC Acadia Owner Manual M Seats and Restraint Systems ........................... 1-1 Front Seats ............................................... 1-2 Rear Seats .............................................. 1-11 Safety Belts ............................................. 1-16 Child Restraints ....................................... 1-36 Airbag System ......................................... 1-61 Restraint System Check ............................ 1-77 Features and Controls ..................................... 2-1 Keys ........................................................ 2-3 Doors and Locks ...................................... 2-10 Windows ................................................. 2-18 ............................ 2-21 Theft-Deterrent Systems Starting and Operating Your Vehicle ........... 2-25 Mirrors .................................................... 2-40 Object Detection Systems .......................... 2-45 OnStar® System ...................................... 2-47 Universal Home Remote System ................ 2-50 Storage Areas ......................................... 2-55 Sunroof .................................................. 2-60 Instrument Panel ............................................. 3-1 .......................... 3-4 ...................................... 3-26 ........ 3-39 .................. 3-57 ....................................... 3-84 Instrument Panel Overview Climate Controls Warning Lights, Gages, and Indicators Driver Information Center (DIC) Audio System(s) Your Driving, the Road, and Your Vehicle Towing Driving Your Vehicle ....................................... 4-1 ..... 4-2 ................................................... 4-26 Service and Appearance Care .......................... 5-1 Service ..................................................... 5-3 Fuel ......................................................... 5-6 Checking Things Under the Hood ............... 5-12 All-Wheel Drive ........................................ 5-43 Headlamp Aiming ..................................... 5-45 Bulb Replacement .................................... 5-45 Windshield Wiper Blade Replacement ......... 5-47 Tires ...................................................... 5-48 Appearance Care ..................................... 5-89 Vehicle Identiﬁcation ................................. 5-98 Electrical System ...................................... 5-99 Capacities and Speciﬁcations ................... 5-107 Maintenance Schedule ..................................... 6-1 ................................ 6-2 Customer Assistance Information .................... 7-1 ........... 7-2 ........................... 7-13 ........... 7-15 Index ................................................................ 1 Customer Assistance and Information Reporting Safety Defects Vehicle Data Recording and Privacy Maintenance Schedule Canadian Owners A French language copy of this manual can be obtained from your dealer/retailer or from: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 1-800-551-4123 www.helminc.com Propriétaires Canadiens On peut obtenir un exemplaire de ce guide en français auprès de concessionnaire ou à l’adresse suivante: Helm Incorporated P.O. Box 07130 Detroit, MI 48207 1-800-551-4123 www.helminc.com GENERAL MOTORS, GM, the GM Emblem, GMC, and the GMC Emblem, are registered trademarks, and the name ACADIA is a trademark of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice. For vehicles ﬁrst sold in Canada, substitute the name “General Motors of Canada Limited” for GMC whenever it appears in this manual. This manual describes features that may be available in this model, but your vehicle may not have all of them. For example, more than one entertainment system may be offered or your vehicle may have been ordered without a front passenger or rear seats. Keep this manual in the vehicle for quick reference. Litho in U.S.A. Part No. 15861574 A First Printing ©2007 General Motors Corporation. All Rights Reserved. ii Using this Manual Many people read the owner manual from beginning to end when they ﬁrst receive their new vehicle to learn about the vehicle’s features and controls. Pictures and words work together to explain things. Index A good place to quickly locate information about the vehicle is the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found. Safety Warnings and Symbols There are a number of safety cautions in this book. A box with the word CAUTION is used to tell about things that could hurt you or others if you were to ignore the warning. {CAUTION: These mean there is something that could hurt you or other people. We tell you what the hazard is and what to do to help avoid or reduce the hazard. Please read these cautions. If you do not, you or others could be hurt. A circle with a slash through it is a safety symbol which means “Do Not,” “Do Not do this” or “Do Not let this happen.” iii Vehicle Symbols The vehicle has components and labels that use symbols instead of text. Symbols are shown along with the text describing the operation or information relating to a speciﬁc component, control, message, gage, or indicator. Vehicle Damage Warnings You will also ﬁnd notices in this manual. Notice: These mean there is something that could damage your vehicle. A notice tells about something that can damage the vehicle. Many times, this damage would not be covered by your vehicle’s warranty, and it could be costly. The notice tells what to do to help avoid the damage. When you read other manuals, you might see CAUTION and NOTICE warnings in different colors or in different words. There are also warning labels on the vehicle which use the same words, CAUTION or NOTICE. iv Section 1 Seats and Restraint Systems Front Seats ......................................................1-2 Manual Seats ................................................1-2 Seat Height Adjuster .......................................1-3 Power Seats ..................................................1-3 Manual Lumbar ..............................................1-4 Power Lumbar ...............................................1-5 Heated Seats .................................................1-5 Memory Seat and Mirrors ................................1-6 Reclining Seatbacks ........................................1-8 Head Restraints ............................................1-10 Rear Seats .....................................................1-11 Rear Seat Operation .....................................1-11 Third Row Seats ...........................................1-13 Safety Belts ...................................................1-16 Safety Belts: They Are for Everyone ................1-16 How to Wear Safety Belts Properly .................1-22 Lap-Shoulder Belt .........................................1-30 Safety Belt Use During Pregnancy ..................1-35 Safety Belt Extender .....................................1-36 Child Restraints .............................................1-36 Older Children ..............................................1-36 Infants and Young Children ............................1-39 Child Restraint Systems .................................1-43 Where to Put the Restraint .............................1-46 Lower Anchors and Tethers for Children (LATCH) ..................................................1-47 Securing a Child Restraint in a Rear Seat Position ...................................................1-55 Securing a Child Restraint in the Right Front Seat Position ............................................1-58 Airbag System ...............................................1-61 Where Are the Airbags? ................................1-64 When Should an Airbag Inﬂate? .....................1-67 What Makes an Airbag Inﬂate? .......................1-68 How Does an Airbag Restrain? .......................1-68 What Will You See After an Airbag Inﬂates? .....1-69 Passenger Sensing System ............................1-70 Servicing Your Airbag-Equipped Vehicle ...........1-75 Adding Equipment to Your Airbag-Equipped Vehicle ....................................................1-76 Restraint System Check ..................................1-77 Checking the Restraint Systems ......................1-77 Replacing Restraint System Parts After a Crash ...................................................1-78 1-1 Front Seats Manual Seats {CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving. 1-2 A. Manual Seat Adjustment Bar. B. Driver Seat Height Adjuster. See Seat Height Adjuster on page 1-3. C. Manual Reclining Seatback Lever. See Reclining Seatbacks on page 1-8. If your vehicle has a manual bucket seat you can adjust the seat forward or rearward with the bar located under the front of the seat cushion. Lift the bar to unlock the seat. Slide the seat to where you want it and release the bar. Try to move the seat with your body to be sure the seat is locked in place. Seat Height Adjuster If your vehicle has a manual driver seat height adjuster, it is located on the outboard side of the seat. See Manual Seats on page 1-2 for more information. To raise the seat, move the lever upward repeatedly until the seat is at the desired height. To lower the seat, move the lever downward repeatedly until the seat is at the desired height. Power Seats Driver’s Seat with Power Seat Control, Power Recline, and Power Lumbar shown A. Power Seat Adjustment Control. B. Power Reclining Seatback Control. See Reclining Seatbacks on page 1-8. C. Power Lumbar Control. See Power Lumbar on page 1-5. If the vehicle has power seats, the controls used to operate them are located on the outboard side of the seats. 1-3 Move the seat forward or rearward by sliding the control forward or rearward. Your vehicle may have additional features to adjust your vehicle’s power seat: (cid:129) Raise or lower the entire seat by moving the entire control up or down. (cid:129) Raise or lower the front part of the seat cushion by moving the front of the control up or down. (cid:129) Raise or lower the rear part of the seat cushion by moving the rear of the control up or down. Your vehicle may have a memory function which allows seat settings to be saved and recalled. See Memory Seat and Mirrors on page 1-6 for more information. Manual Lumbar If your vehicle has this feature, the handle is located on the inboard side of the seatback. See Manual Seats on page 1-2 for more information. Turn the handle rearward to decrease lumbar support. Turn the handle forward to increase lumbar support. Keep in mind that as your seating position changes, as it may during long trips, so should the position of your lumbar support. Adjust the seat as needed. 1-4 Power Lumbar If the seats have power lumbar, the controls used to operate this feature are located on the outboard side of the seats. See Power Seats on page 1-3 for more information. To increase lumbar support, press and hold the front of the control. To decrease lumbar support, press and hold the rear of the control. To raise the height of the lumbar support, press and hold the top of the control. To lower the height of the lumbar support, press and hold the bottom of the control. Release the control when the lower seatback reaches the desired level of lumbar support. You may need to adjust the lumbar support whenever you change your seating position. Heated Seats On vehicles with heated front seats the controls are located on the center console. To operate the heated seats the engine must be running. I(Heated Seatback): Press this button to turn on the heated seatback. J(Heated Seat and Seatback): Press this button to turn on the heated seat and seatback. The light on the button will come on to indicate that the feature is working. Press the button to cycle through the temperature settings of high, medium, and low and to turn the heat to the seat off. Indicator lights above the button will show the level of heat selected: three for high, two for medium, and one for low. The passenger seat may take longer to heat up. If your vehicle has remote vehicle start and is started using the remote keyless entry transmitter, the front heated seats will be turned on to the high setting if it is cold outside. See “Remote Vehicle Start” under Remote Keyless Entry (RKE) System Operation on page 2-5. When the key is inserted into the ignition and the ignition is turned on, the heated seat feature will turn off. To turn the heated seat feature back on, press the desired button. 1-5 (cid:129) (cid:129) (cid:129) (cid:129) Memory Seat and Mirrors Your vehicle may have the memory package. The controls for this feature are located on the driver’s door panel, and are used to program and recall memory settings for the driver’s seat and outside mirrors. To save your positions in memory, do the following: 1. Adjust the driver’s seat, including the seatback recliner and lumbar and both outside mirrors to a comfortable position. See Outside Power Mirrors on page 2-42 for more information. Not all mirrors will have the ability to save and recall the mirror positions. 2. Press and hold button 1 until two beeps let you know that the position has been stored. A second seating and mirror position can be programmed by repeating the above steps and pressing button 2. To recall the memory positions, the vehicle must be in PARK (P). Press and release either button 1 or button 2 corresponding to the desired driving position. The seat and outside mirrors will move to the position previously stored. You will hear a single beep. 1-6 Using the Remote Keyless Entry (RKE) transmitter to enter your vehicle with the remote recall memory feature on causes automatic seat and mirror adjustment. There is no adjustment when the position has not been changed by another seating position or the easy exit feature. See “MEMORY SEAT RECALL” under DIC Vehicle Customization (With DIC Buttons) on page 3-75 for more information. To stop recall movement of the memory feature at any time, press one of the power seat controls, memory buttons, or power mirror buttons. If something has blocked the driver’s seat while recalling a memory position, the driver’s seat recall may stop working. If this happens, press the appropriate control for the area that is not recalling for two seconds, after the obstruction is removed. Then try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not being recalled, see your dealer/retailer for service. Easy Exit Seat The control for this feature is located on the driver’s door panel between buttons 1 and 2. With the vehicle in PARK (P), the exit position can be recalled by pressing the exit button. You will hear a single beep. The driver’s seat will move back. If the easy exit seat feature is on in the Driver Information Center (DIC), automatic seat movement will occur when the key is removed from the ignition. See “EASY EXIT SEAT” under DIC Vehicle Customization (With DIC Buttons) on page 3-75 for more information. Further programming for the memory seat feature can be done using the DIC. You can select or cancel the following: The automatic easy exit seat feature. The remote memory seat recall feature. For programming information, see DIC Vehicle Customization (With DIC Buttons) on page 3-75. 1-7 (cid:129) (cid:129) Reclining Seatbacks Manual Reclining Seatbacks {CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving. {CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked. 1-8 In vehicles with seats that have manual reclining seatbacks, the lever used to operate them is located on the outboard side of the seat. To recline the seatback, do the following: 1. Lift the recline lever. 2. Move the seatback to the desired position, then release the lever to lock the seatback in place. 3. Push and pull on the seatback to make sure it is locked. To return the seatback to an upright position, do the following: 1. Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright position. 2. Push and pull on the seatback to make sure it is locked. Power Reclining Seatbacks In vehicles with seats that have power reclining seatbacks, the control used to recline them is located on the outboard side of the seat behind the power seat control. See Power Seats on page 1-3 for more information. To recline the seatback, tilt the top of the control rearward. To bring the seatback forward, tilt the top of the control forward. (cid:129) (cid:129) {CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. The shoulder belt cannot do its job because it will not be against your body. Instead, it will be in front of you. In a crash, you could go into it, receiving neck or other injuries. The lap belt cannot do its job either. In a crash, the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries. For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear your safety belt properly. Do not have a seatback reclined if your vehicle is moving. 1-9 Head Restraints Pull the head restraint up to raise it. To lower the head restraint, press the release button, located on the head restraint post on the top of the seatback, while you push the head restraint down. Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head. This position reduces the chance of a neck injury in a crash. 1-10 Rear Seats Rear Seat Operation A. Seat Adjustment Handle. B. Reclining Seatback Strap. C. Sliding Seat Lever. Entering and Exiting the Third Row {CAUTION: Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position. Push and pull on the seat to make sure it is locked into place. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. 1-11 Returning the Seat to the Seating Position To return the second row seat to its normal seating position: 1. Remove objects on the ﬂoor behind the second row seat, or in the seat tracks on the ﬂoor. 2. Pull the seatback rearward until it is locked in place. 3. Slide the seat rearward by pushing on the seatback until it is locked into place. 4. Push down on the rear of the seat cushion until it is locked in place. 5. Push and pull on the seatback and seat cushion to make sure they are locked in place 6. Check that the safety belt is not under the seat cushion. To access the third row: 1. Remove objects on the ﬂoor in front of or on the second row seat, or in the seat tracks on the ﬂoor. 2. Move the front center console armrest completely forward. See Center Console Storage on page 2-56 3. Place folding armrests in the upright position. 4. The safety belt must be unfastened and in the stowed position. 5. Pull the sliding seat lever (C) forward and move the seatback forward. The seat cushion will fold, and the entire seat will slide forward. 1-12 Reclining the Seatbacks To recline the seatback: 1. Leaning forward in the seat, pull the reclining seatback strap (B). 2. Move the seatback to the desired position, then release the strap to lock the seatback in place. 3. Push and pull on the seatback to make sure it is locked. Folding the Rear Seat To fold the second row seats: 1. Remove anything on or under the seat. 2. Place the armrest in the upright position, and unfasten the safety belt. 3. Pull forward on the reclining seatback strap (B) and push down on the seatback. 4. If the headrest hits the front seat, slide the second row seat rearward. To return the seatback to the seating position, lift the upper corner of the seatback and push it rearward until it locks into place. Push and pull on the seatback to make sure it is locked. Adjusting the Seats To adjust the second row seats, pull outward on the seat adjustment handle (A). Slide the seat forward or rearward to the desired position. Release the handle and push and pull on the seat to make sure it is locked. Third Row Seats {CAUTION: Using the third row seating position while the second row is folded, or pushed forward in the entry position, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position. Push and pull on the seat to make sure it is locked into place. The third row seats can be folded forward or removed. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. 1-13 To fold the seatback: 1. Remove anything on or under the seat. 3. Pull up on the release lever located on the back of the seat. The headrest moves forward automatically. 2. Disconnect the rear safety belt mini-latch, using a key in the slot on the mini-buckle, let the belt retract into the headliner. Stow the mini-latch in the holder located in the headliner. 4. Push the seatback forward to lay ﬂat. To return the seatback to the seating position: 1. Raise the seatback into place by using the pullstrap from the rear of the vehicle, or by pushing it into place from inside the vehicle. 2. The headrest must be locked into place before sitting in the seat. 1-14 {CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked. 3. Push and pull on the seatback to make sure it is locked in place. {CAUTION: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted. 4. Reconnect the center safety belt mini-latch to the mini-buckle. Do not let it twist. 5. Pull on the safety belt to be sure the mini-latch is secure. Removing the Third Row Seats 1. Remove the cargo management system, if it is in the vehicle. See Cargo Management System on page 2-59. 2. Remove anything on or under the seat. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. 3. Fold the seatback down. See “Folding the Seatback” earlier in this section. 4. Remove the rear bolts located on the ﬂoor on each side of the seat. 5. Remove the seat by tilting it slightly upward, and then pulling it out of the rear of the vehicle in one motion. 6. Put the bolts back into the holes on the ﬂoor so they do not get misplaced. 1-15 Installing the Third Row Seats 1. Before installing the seat the seatback must be folded forward. See “Folding the Seatback” earlier in this section. The seats must be placed in the proper locations for the legs to attach correctly. The wider seat must be installed on the driver side and the narrower seat on the passenger side. Remove the bolts from the holes in the ﬂoor before installing the seats. 2. Place the seat on the vehicle ﬂoor so that the front seat hooks are on the vehicle bars. 3. Reinstall the bolts, and torque to 55 Y (41 lb ft). Pull up on the seat to make sure it is locked in place. 4. Raise the seatback to its upright position. Push and pull on the seatback to make sure it is locked into place. 5. Push the headrest up into position. Push and pull on the headrest to make sure it is locked into place. 6. Reconnect the center safety belt mini-latch to the mini-buckle. Do not let it twist. Safety Belts Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. {CAUTION: Do not let anyone ride where he or she cannot wear a safety belt properly. If you are in a crash and you are not wearing a safety belt, your injuries can be much worse. You can hit things inside the vehicle harder or be ejected from it and be seriously injured or killed. In the same crash, you might not be, if you are buckled up. Always fasten your safety belt, and check that your passenger(s) are restrained properly too. 1-16 A few crashes are mild, and some crashes can be so serious that even buckled up, a person would not survive. But most crashes are in between. In many of them, people who buckle up can survive and sometimes walk away. Without belts they could have been badly hurt or killed. After more than 40 years of safety belts in vehicles, the facts are clear. In most crashes buckling up does matter... a lot! {CAUTION: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly. Your vehicle has indicators as a reminder to buckle your safety belts. See Safety Belt Reminders on page 3-41. In most states and in all Canadian provinces, the law requires wearing safety belts. Here is why: You never know if you will be in a crash. If you do have a crash, you do not know if it will be a serious one. 1-17 Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it is just a seat on wheels. 1-18 Get it up to speed. Then stop the vehicle. The rider does not stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield... 1-19 or the instrument panel... 1-20 or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. Q: If I am a good driver, and I never drive far from home, why should I wear safety belts? A: You may be an excellent driver, but if you are in a crash — even one that is not your fault — you and your passenger(s) can be hurt. Being a good driver does not protect you from things beyond your control, such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h). Safety belts are for everyone. Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt? A: You could be — whether you are wearing a safety belt or not. But your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted. And you can unbuckle a safety belt, even if you are upside down. Q: If my vehicle has airbags, why should I have to wear safety belts? A: Airbags are supplemental systems only; so they work with safety belts — not instead of them. Whether or not an airbag is provided, all occupants still have to buckle up to get the most protection. That is true not only in frontal collisions, but especially in side and other collisions. 1-21 How to Wear Safety Belts Properly This section is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your vehicle, see Older Children on page 1-36 or Infants and Young Children on page 1-39. Follow those rules for everyone’s protection. It is very important for all occupants to buckle up. Statistics show that unbelted people are hurt more often in crashes than those who are wearing safety belts. Occupants who are not buckled up can be thrown out of the vehicle in a crash. And they can strike others in the vehicle who are wearing safety belts. First, before you or your passenger(s) wear a safety belt, there is important information you should know. 1-22 Sit up straight and always keep your feet on the ﬂoor in front of you. The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones and you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The shoulder belt locks if there is a sudden stop or crash. Q: What is wrong with this? {CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should ﬁt snugly against your body. A: The shoulder belt is too loose. It will not give nearly as much protection this way. 1-23 Q: What is wrong with this? {CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs. A: The lap belt is too loose. It will not give as much protection this way. 1-24 Q: What is wrong with this? {CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you. A: The belt is buckled in the wrong place. 1-25 {CAUTION: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries. Be sure the belt goes under the armrests. Q: What is wrong with this? A: The belt is over an armrest. 1-26 Q: What is wrong with this? A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. {CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones. You could also severely injure internal organs like your liver or spleen. The shoulder belt should go over the shoulder and across the chest. 1-27 {CAUTION: You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The shoulder belt should go over the shoulder and across the chest. Q: What is wrong with this? A: The belt is behind the body. 1-28 Q: What is wrong with this? {CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to ﬁx it. A: The belt is twisted across the body. 1-29 Lap-Shoulder Belt All seating positions in your vehicle have a lap-shoulder belt. If you are using a rear seating position with a detachable safety belt and the safety belt is not attached, see Third Row Seats on page 1-13 for instruction on reconnecting the safety belt to the mini-buckle. Here is how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To see how, see “Seats” in the Index. 2. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The lap-shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. If you ever pull the shoulder portion of a passenger belt out all the way, you may engage the child restraint locking feature. If this happens, just let the belt go back all the way and start again. 1-30 3. Push the latch plate into the buckle until it clicks. 4. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 1-36. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if necessary. 5. If equipped with a shoulder belt height adjuster, move it to the height that is right for you. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See “Shoulder Belt Height Adjustment” later in this section. Shoulder Belt Height Adjustment Your vehicle has shoulder belt height adjusters for the driver and right front passenger. Adjust the height so that the shoulder portion of the belt is centered on your shoulder. The belt should be away from your face and neck, but not falling off your shoulder. Incorrect positioning of the shoulder belt can reduce the effectiveness of the safety belt. To move it down, push down on the button (A) and move the height adjuster to the desired position. You can move the height adjuster up by pushing up on the shoulder belt guide. After you move the height adjuster to where you want it, try to move it down without pushing the button down to make sure it has locked into position. 1-31 6. To make the lap part tight, pull up on the shoulder belt. It may be necessary to pull the stitching on the safety belt through the latch plate to fully tighten the lap belt on smaller occupants. To unlatch the belt, push the button on the buckle. The belt should go back out of the way. When the safety belt is not in use, slide the latch plate up the safety belt webbing. The latch plate should rest on the stitching on the safety belt, near the guide loop on the side wall. Before you close a door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle. There is a guide for each outboard passenger position in the second row seat and all passenger positions in the third row. Here is how to install a comfort guide to the safety belt: Outboard Positions 1. For the outboard positions, remove the guide from its storage clip on the interior body. Safety Belt Pretensioners Your vehicle has safety belt pretensioners for front outboard occupants. Although you cannot see them, they are part of the safety belt assembly. They can help tighten the safety belts during the early stages of a moderate to severe frontal, near frontal, or rear crash if the threshold conditions for pretensioner activation are met. And, for vehicles that have side impact airbags, safety belt pretensioners can help tighten the safety belts in a side crash or a rollover event. Pretensioners work only once. If they activate in a crash, you will need to get new ones, and probably other new parts for your safety belt system. See Replacing Restraint System Parts After a Crash on page 1-78. Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the belt away from the neck and head. 1-32 For the third row center position, locate the comfort guide which is located in a storage pocket, at the top of the seat, under the headrest on the driver’s side of the vehicle. To access the comfort guide, you will ﬁrst need to move the headrest forward by pulling on the handle behind the seatback. The comfort guide will now be accessible. Pull the comfort guide out of its storage location and then return the headrest to its upright position. Third Row Center Position The elastic cord on the comfort guide is adjustable. You can make it longer or shorter by squeezing both ends of the plastic adjuster. 2. Place the guide over the belt, and insert the two edges of the belt into the slots of the guide. 1-33 {CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. 3. Be sure that the belt is not twisted and it lies ﬂat. The elastic cord must be under the belt and the guide on top. 1-34 Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. 4. Buckle, position, and release the safety belt as described previously in this section. Make sure that the shoulder belt crosses the shoulder. To remove and store the comfort guide, squeeze the belt edges together so that you can take them out of the guide. Slide the guide into its storage location or on its storage clip. A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy. The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly. 1-35 Child Restraints Older Children Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt is not long enough, your dealer/retailer will order you an extender. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you. To help avoid personal injury, do not let someone else use it, and use it only for the seat it is made to ﬁt. The extender has been designed for adults. Never use it for securing child seats. To wear it, attach it to the regular safety belt. For more information, see the instruction sheet that comes with the extender. Older children who have outgrown booster seats should wear the vehicle’s safety belts. 1-36 The manufacturer’s instructions that come with the booster seat, state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder belt until the child passes the below ﬁt test: (cid:129) Sit all the way back on the seat. Do the knees bend at the seat edge? If yes, continue. If no, return to the booster seat. (cid:129) Buckle the lap-shoulder belt. Does the shoulder belt rest on the shoulder? If yes, continue. If no, try using the rear safety belt comfort guide. See “Rear Safety Belt Comfort Guides” under Lap-Shoulder Belt on page 1-30 for more information. If the shoulder belt still does not rest on the shoulder, then return to the booster seat. (cid:129) Does the lap belt ﬁt low and snug on the hips, touching the thighs? If yes, continue. If no, return to the booster seat. (cid:129) Can proper safety belt ﬁt be maintained for the length of the trip? If yes, continue. If no, return to the booster seat. Q: What is the proper way to wear safety belts? A: An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should ﬁt snugly below the hips, just touching the top of the thighs. This applies belt force to the child’s pelvic bones in a crash. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash. Also see “Rear Safety Belt Comfort Guides” under Lap-Shoulder Belt on page 1-30. According to accident statistics, children and infants are safer when properly restrained in the rear seating positions than in the front seating positions. In a crash, children who are not buckled up can strike other people who are buckled up, or can be thrown out of the vehicle. Older children need to use safety belts properly. 1-37 {CAUTION: {CAUTION: Never do this. Here two children are wearing the same belt. The belt cannot properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. In a crash, the child would not be restrained by the shoulder belt. The child might slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The child could also move too far forward increasing the chance of head and neck injury. The shoulder belt should go over the shoulder and across the chest. 1-38 {CAUTION: Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Never leave children unattended in a vehicle and never allow children to play with the safety belts. Every time infants and young children ride in vehicles, they should have the protection provided by appropriate restraints. Children who are not restrained properly can strike other people, or can be thrown out of the vehicle. In addition, young children should not use the vehicle’s adult safety belts alone; they need to use a child restraint. 1-39 Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle. {CAUTION: People should never hold an infant in their arms while riding in a vehicle. An infant does not weigh much — until a crash. During a crash an infant will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) infant will suddenly become a 240 lb (110 kg) force on a person’s arms. An infant should be secured in an appropriate restraint. 1-40 {CAUTION: Children who are up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them. Young children and infants need the protection that a child restraint system can provide. 1-41 Q: What are the different types of add-on child restraints? A: Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used. For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufacturer’s instructions that come with the restraint state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs. {CAUTION: Newborn infants need complete support, including support for the head and neck. This is necessary because a newborn infant’s neck is weak and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing seat settles into the restraint, so the crash forces can be distributed across the strongest part of an infant’s body, the back and shoulders. Infants should always be secured in appropriate infant restraints. 1-42 {CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child’s abdomen. In a crash, the belt would apply force on a body area that is unprotected by any bony structure. This alone could cause serious or fatal injuries. Young children should always be secured in appropriate child restraints. Child Restraint Systems A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. 1-43 A forward-facing child seat (B) provides restraint for the child’s body with the harness. A booster seat (C-D) is a child restraint designed to improve the ﬁt of the vehicle’s safety belt system. A booster seat can also help a child to see out the window. 1-44 Securing an Add-On Child Restraint in the Vehicle {CAUTION: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Make sure the child restraint is properly installed in the vehicle using the vehicle’s safety belt or LATCH system, following the instructions that came with that restraint, and also the instructions in this manual. To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraint systems must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system. See Lower Anchors and Tethers for Children (LATCH) on page 1-47 for more information. A child can be endangered in a crash if the child restraint is not properly secured in the vehicle. When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in your vehicle — even when no child is in it. Securing the Child Within the Child Restraint {CAUTION: A child can be seriously injured or killed in a crash if the child is not properly secured in the child restraint. Because there are different systems, it is important to refer to the instructions that come with the restraint. Make sure the child is properly secured, following the instructions that came with that restraint. 1-45 Where to Put the Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. We recommend that children and child restraints be secured in a rear seat, including: an infant or a child riding in a rear-facing child restraint; a child riding in a forward-facing child seat; an older child riding in a booster seat; and children, who are large enough, using safety belts. A label on your sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. 1-46 {CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s airbag inﬂates. This is because the back of the rear-facing child restraint would be very close to the inﬂating airbag. Even though the passenger sensing system is designed to turn off the right front passenger’s frontal airbag if the system detects a rear-facing child restraint, no system is fail-safe, and no one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off. We recommend that rear-facing child restraints be secured in a rear seat, even if the airbag is off. If you secure a forward-facing child restraint in the right front seat, always move the front passenger seat as far back as it will go. It is better to secure the child restraint in a rear seat. See Passenger Sensing System on page 1-70 for additional information. When securing a child restraint in a rear seating position, study the instructions that came with your child restraint to make sure it is compatible with this vehicle. Wherever you install a child restraint, be sure to secure the child restraint properly. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in your vehicle — even when no child is in it. Lower Anchors and Tethers for Children (LATCH) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system. Make sure that a LATCH-compatible child restraint is properly installed using the anchors, or use the vehicle’s safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual. When installing a child restraint with a top tether, you must also use either the lower anchors or the safety belts to properly secure the child restraint. A child restraint must never be attached using only the top tether and anchor. In order to use the LATCH system in your vehicle, you need a child restraint that has LATCH attachments. The child restraint manufacturer will provide you with instructions on how to use the child restraint and its attachments. The following explains how to attach a child restraint with these attachments in your vehicle. Not all vehicle seating positions or child restraints have lower anchors and attachments or top tether anchors and attachments. 1-47 Lower Anchors Top Tether Anchor Lower anchors (A) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (B). A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash. Your child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor. 1-48 Some child restraints with top tethers are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Be sure to read and follow the instructions for your child restraint. If the child restraint does not have a top tether, one can be obtained, in kit form, for many child restraints. Ask the child restraint manufacturer whether or not a kit is available. Lower Anchor and Top Tether Anchor Locations i (Top Tether Anchor): Seating positions with top tether anchors. j (Lower Anchor): Seating positions with two lower anchors. Second Row — Bucket 1-49 i (Top Tether Anchor): Seating positions with top tether anchors. j (Lower Anchor): Seating positions with two lower anchors. i (Top Tether Anchor): Seating positions with top tether anchors. To assist you in locating the lower anchors, each second row anchor position has a label, near the crease between the seatback and the seat cushion. To assist you in locating the top tether anchors, the top tether anchor symbol is located on the cover or near the anchor. Second Row — 60/40 Bench Third Row 1-50 Second Row — Bucket Shown, Bench Similar Third Row Seat The top tether anchors are located at the bottom rear of the seatback for each seating position in the second row. Open the cover to access the anchors. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed. The third row has one top tether anchor located at the bottom rear of the center seatback. This anchor should be used for the center seating position only. Never install two top tethers using the same top tether anchor. Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached. 1-51 {CAUTION: Each top tether anchor and lower anchor in the vehicle is designed to hold only one child restraint. Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a crash. A child or others could be injured if this happens. To help prevent injury to people and damage to your vehicle, attach only one child restraint per anchor. Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. See Where to Put the Restraint on page 1-46 for additional information. Securing a Child Restraint Designed for the LATCH System {CAUTION: If a LATCH-type child restraint is not attached to anchors, the restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchors, or use the vehicle’s safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual. 1-52 {CAUTION: Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Secure any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, if your vehicle has one, after the child restraint has been installed. Be sure to follow the instructions of the child restraint manufacturer. Notice: Contact between the child restraint LATCH attachment parts and the vehicle’s safety belt assembly may cause damage to these parts. Make sure when securing unused safety belts behind the child restraint that there is no contact between the child restraint LATCH attachment parts and the vehicle’s safety belt assembly. Folding an empty rear seat with the safety belts secured may cause damage to the safety belt or the seat. When removing the child restraint, always remember to return the safety belts to their normal, stowed position before folding the rear seat. 1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual. 1.1. Find the lower anchors for the desired seating position. 1.2. Recline the seatback to the full reclined position. Make sure the second row bench seatbacks are aligned at the same angle before placing the child restraint on the seat. Make sure the third row bench seatbacks are both upright before placing the child restraint on the seat. 1.3. Put the child restraint on the seat. 1.4. Attach and tighten the lower attachments on the child restraint to the lower anchors. 1-53 2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if the vehicle has one. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor. 2.2. If the anchor is covered, ﬂip open the cover to expose the anchor. 2.3. Route, attach and tighten the top tether according to your child restraint instructions and the following instructions: If the position you are using does not have a headrest or head restraint and you are using a single tether, route the tether over the seatback. If the position you are using does not have a headrest or head restraint and you are using a dual tether, route the tether over the seatback. If the position you are using has a ﬁxed headrest or head restraint and you are using a dual tether, route the tether around the headrest or head restraint. 1-54 If the position you are using has a ﬁxed headrest or head restraint and you are using a single tether, route the tether over the headrest or head restraint. 3. Push and pull the child restraint in different directions to be sure it is secure. Securing a Child Restraint in a Rear Seat Position When securing a child restraint in a rear seating position, study the instructions that came with your child restraint to make sure it is compatible with this vehicle. If your child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on page 1-47 for how to install your child restraint using LATCH. If you secure a child restraint using a safety belt and it uses a top tether, see Lower Anchors and Tethers for Children (LATCH) on page 1-47 for top

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2008 GMC Acadia Owners Manual