2006 Ford Fusion 2 Owners Manual

and for each preset button. Note: When you drive to another part of the country, FM RDS (radio data system) stations that broadcast on alternative frequencies are stored on the preset buttons. WAVEBAND BUTTON Note: The AM/FM or RADIO button can also be used to return to radio reception when you have been listening to another source. 6000CD and 6006CDC Press the AM/FM button to select from the wavebands available. Sony CD Press the RADIO button to select from the wavebands available. AUTOSTORE CONTROL Note: This function will overwrite the previously stored autostore preset stations. Note: This function can also be used to store stations manually in the same way as other wavebands.

Note: The strongest signals available on the selected waveband will be stored. The sound is muted and AUTOSTORE will be shown in the display while the unit searches through the frequencies. When the search is complete, sound is restored and the strongest signals are stored on the autostore presets. 6000CD and 6006CDC Press and hold the AM/FM button. Sony CD Press and hold the AST or RADIO button. TRAFFIC INFORMATION CONTROL Many stations that broadcast on the FM waveband have a TP code to signify that they carry traffic programme information. Activating traffic announcements Before you can receive traffic announcements, you must press the TA button. Either TA-D or TA-L will be shown in the display to indicate that the feature is switched on. If you are already tuned to a station that broadcasts traffic information, TP will also be shown in the display. Otherwise the unit will search for a traffic programme and display TP SEEK while doing so. If it cannot locate such a station, NOT FOUND will be shown in the display. TP will be shown within a box in the display when you are tuned to a station providing traffic information from a linked RDS (radio data system) or EON (enhanced other network) station.

141

Audio unit operation

When traffic information is broadcast, it will automatically interrupt normal radio, tape or CD playback and TRAFFIC or NEWS will be shown in the display. If the traffic signal weakens, TP will flash in the display. Press the seek up or seek down button (the left or right navigation button on Sony or Sony DAB audio units) to find another station. Note: If this happens during CD or AUX playback or, on certain models, with the radio volume set to zero, the unit will retune automatically if the station is not available. If a non-traffic station is selected or recalled using a preset button, the audio unit will remain on that station unless TA is turned off, then on again. Note: If TA is on and you select a preset or manual tune to a non TA station no traffic announcement will be heard. Local or distant traffic The number of RDS or EON traffic announcements may become excessive in some areas so there is an option to select between local traffic information and all available information. 6000CD and 6006CDC 1. Press and hold the MENU button until

the display changes.

2. Press the MENU button repeatedly

until TA is shown in the display.

3. Press the seek up or seek down button

to select either local (TA LOCAL) or distant (TA DIST) traffic announcements.

4. Press the MENU button or allow the

menu to time out to confirm your selection.

Note: Either TA-L or TA-D will be shown in the display.

Sony CD 1. Press the MENU button and use the up or down navigation button to select the TA display.

2. Press the left or right navigation button

to select your required setting.

3. Press the MENU button to confirm

your selection.

Traffic announcement volume Traffic announcements interrupt normal broadcasts at a preset minimum level that is usually louder than normal listening volumes. To adjust the preset volume 6000CD and 6006CDC 1. Press and hold the TA button. 2. Rotate the volume control to make the

necessary adjustment.

Note: The selected level will be shown in the display. Sony CD 1. Press and hold the TA button. 2. Press the left or right navigation button

to make the necessary adjustment. Note: The selected level will be shown in the display. Ending traffic announcements The audio unit will return to normal operation at the end of each traffic announcement. To end the announcement prematurely, press TA during the announcement. Note: If you press TA at any other time it will switch all announcements off.

142

Audio unit operation

STATION TUNING CONTROL DAB service linking Note: The DAB service linking is as per default off. Note: Service linking allows cross-referencing to other corresponding frequencies of the same station, for example FM and other DAB ensembles. Note: The system will automatically change to another corresponding station if the current one becomes unavailable, for example when leaving the coverage area. Switching DAB service linking on 1. Press the MENU button. 2. Using the up or down navigation button scroll through the display until DIGITAL RADIO SERVICE LINK is shown in the display.

3. Using the left or right navigation button

select AUTO.

4. Press the MENU button or the button

between the navigation buttons to confirm your selection.

Switching DAB service linking off 1. Press the MENU button. 2. Using the up or down navigation button scroll through the display until DIGITAL RADIO SERVICE LINK is shown in the display.

3. Using the left or right navigation button

select OFF.

4. Press the MENU button or the button

between the navigation buttons to confirm your selection.

Seek tuning 6000CD and 6006CDC Select a waveband and briefly press the seek up or seek down button. The unit will stop at the first station it finds in the direction you have chosen. Sony CD Select a waveband and briefly press the up or down navigation button. The unit will stop at the first station it finds in the direction you have chosen. Manual tuning 6000CD and 6006CDC 1. Select a waveband and press the

MENU button until MAN is shown in the display.

2. Press the seek up or seek down button

to tune up or down the waveband in small increments or press and hold to increment quickly, until you find a station you want to listen to.

Sony CD Select a waveband and briefly press the up or down navigation button to tune up or down the waveband in small increments. The display shows the frequency selected. Scan tuning The scan function allows you to listen to 10 seconds of each station detected.

143

Audio unit operation

6000CD and 6006CDC 1. Press the MENU button repeatedly until SCAN is shown in the display.

2. Press the seek up or seek down button

to scan up or down the selected waveband.

3. Depending on the audio unit, press the seek up or seek down button or the MENU button to continue listening to a station.

Sony CD 1. Press the SCAN button. SCAN flashes or SCANNING is shown in the display. 2. Press the left or right navigation button

to scan within a waveband.

3. Press the SCAN button to continue

listening to a station.

144

Audio unit menus

Changing the DSP settings 1. Press the DSP button once for

occupancy and twice for equaliser.

2. Use the up and down navigation

buttons to select the required setting.

3. Press the button between the

navigation buttons to confirm your selection.

AUDIO DISTORTION REDUCTION (CLIP) This function automatically detects sound distortion and reduces the volume level until the distortion has been eliminated. This means that whilst the display might change numerically when you raise the volume manually with the control, there may be no actual increase in sound. 6000CD and 6006CDC 1. Press and hold the MENU button until

the display changes.

2. Press the MENU button repeatedly

until CLIP is shown in the display.

3. Using the seek up or seek down button

turn the function on or off.

4. Press the MENU button or allow the

system to time out to confirm your selection.

Sony CD 1. Press the MENU button briefly. 2. Using the up or down navigation button scroll through the display until CLIP is shown in the display.

3. Press the MENU button or allow the

system to time out to confirm your selection.

AUTOMATIC VOLUME CONTROL This function adjusts the volume level to compensate for engine and road speed noise. 6000CD and 6006CDC 1. Press the MENU button repeatedly

until AVC is shown in the display.

2. Use the seek up or seek down button

to adjust the setting.

3. Press the MENU button or allow the

system to time out to confirm your selection.

Sony CD 1. Press the MENU button. 2. Using the up or down navigation button scroll through the display until AVC is shown in the display.

3. Press the MENU button or allow the

system to time out to confirm your selection.

DIGITAL SIGNAL PROCESSING (DSP) DSP occupancy This feature takes into account the differences in distance from the various speakers in the vehicle to each seat. Select the sitting position for which the audio is to be correctly enhanced. DSP equaliser Select the music category that most suits your listening preference. The audio output will change to enhance the particular style of music chosen.

145

Audio unit menus

ALTERNATIVE FREQUENCIES Many programmes broadcast on the FM waveband have a PI (programme identification) code, which can be recognised by audio units. If your radio has AF (alternative frequencies) tuning switched on and you move from one transmission area to another, this function will search for and switch to a stronger station signal, if one can be found. Under certain conditions, however, AF tuning may temporarily disrupt normal reception. When selected, the unit continually evaluates signal strength and, if a better signal becomes available, the unit will switch to that alternative. It mutes while it checks a list of alternative frequencies and, if necessary, it will search once across the selected waveband for a genuine alternative frequency. It will restore radio reception when it finds one or, if one is not found, the unit will return to the original stored frequency. On certain units, NOT FOUND will be shown in the display. With AF-MAN selected, the unit operates in a similar way to AF-AUTO or AF-ON, but only searches for an alternative frequency when prompted by pressing a preset button. With AF-OFF selected, the original stored frequency remains selected. In this mode, AF-OFF will be displayed every time the unit is turned on. 6000CD and 6006CDC 1. Press and hold the MENU button until

the display changes.

2. Press the MENU button repeatedly

until AF is shown in the display.

146

3. Using the seek up or seek down button

select the required setting.

4. Press the MENU button or allow the

system to time out to confirm your selection.

Sony CD 1. Press the MENU button briefly. 2. Using the left or right navigation button

scroll through the display until the required setting is shown in the display.

3. Press the MENU button to confirm

your selection.

REGIONAL MODE (REG) The function REG (regional mode) controls the behaviour of AF switching between regionally related networks of a parent broadcaster. A broadcaster may run a fairly large network across a large part of the country. At various times of the day this large network may be broken down into a number of smaller regional networks, typically centred on major towns or cities. When the network is not split into regional variants, the whole network caries the same programming. Regional mode ON: This prevents random AF switches when neighbouring regional networks are not carrying the same programming. Regional mode OFF: This allows a larger coverage area if neighbouring regional networks are carrying the same programming, but can cause random AF switches if they are not. 6000CD and 6006CDC 1. Press and hold the MENU button until

the display changes.

2. Press the MENU button repeatedly

until REG is shown in the display.

Audio unit menus

3. Press the button between the

navigation buttons to make your selection.

4. Using the left or right navigation button

turn the function on or off.

5. Press the MENU button or the button

between the navigation buttons to confirm your selection.

3. Using the seek up or seek down button

turn the function on or off.

4. Press the MENU button or allow the

system to time out to confirm your selection.

Sony CD 1. Press the MENU button briefly. 2. Using the up or down navigation button

scroll through the display until REGIONAL is shown in the display.

3. Press the MENU button or allow the

system to time out to confirm your selection.

NEWS BROADCASTS Some audio units interrupt normal reception to broadcast news bulletins from stations on the FM waveband linked stations, in the same way as traffic information is provided. During news broadcasts, the display alternates between the station name and NEWS. News interrupts are broadcast at the same preset volume level as traffic announcements. 6000CD and 6006CDC 1. Press and hold the MENU button until

NEWS is shown in the display.

2. Using the seek up or seek down button

turn the function on or off.

3. Press the MENU button to confirm

your selection.

Sony CD 1. Press the MENU button. 2. Using the up or down navigation button scroll through the display until NEWS is shown in the display.

147

Compact disc player

LOADING COMPACT DISCS 6000CD Always check that the CD aperture is empty before inserting a CD. Insert a CD, label side up, into the audio unit. 6006CDC To load a single CD Press and release the LOAD button or press a preset button.WAIT will be shown in the display. When the message changes to LOAD CD, and lights flash in the CD aperture, Insert a CD, label side up, into the audio unit. To load more than one CD WARNING

If the power to the audio unit has been disconnected, then reconnected, the unit will

automatically check for the presence of discs. This will take approximately 25
seconds. During this time all functions except Keycode entry will be locked out.

1. Press and hold the LOAD button until

LOAD ALL is shown in the display.

2. When the message changes to LOAD CD, and lights flash in the CD aperture, insert a CD, label side up, into the audio unit.

3. A numbered disc icon will flash in the display and LOAD will be shown in the display. When the disc is loaded, a number in one of the disc icons will indicate its location.

4. When the message changes to WAIT

and then to LOAD CD you can load another CD.

5. Repeat the last step to load more CDs or allow the unit to time out if you have finished loading your discs.

Note: Do not try to insert a CD when WAIT is shown in the display. Note: Do not insert two CDs in a figure of eight fashion with edges overlapping. Note: You can only load a maximum of six CDs. Note: If the LOAD button is pressed again, CDC FULL will be shown in the display. Sony CD Always check that the CD aperture is empty before inserting a CD. Insert a CD, label side up, into the audio unit. LOADING, READING CD and AUDIO CD or MP3 CD will be shown in the display, and playback will start automatically. TRACK SELECTION 6000CD and 6006CDC Press the seek up button once to move to the next track or press it repeatedly to access later tracks. Press the seek down button once to replay the current track. If pressed within two seconds of the start of a track, the previous track will be selected. Press the seek down button repeatedly to select previous tracks. Sony CD Press the up navigation button once to move to the next track or press it repeatedly to access later tracks.

148

Compact disc player

Press the down navigation button once to replay the current track. If pressed within two seconds of the start of a track, the previous track will be selected. Press the down navigation button repeatedly to select previous tracks. COMPACT DISC PLAYBACK Note: During playback, the display indicates the disc, track and time that has elapsed since the start of the track. Note: On CD changer audio units, if two or more CD's are loaded one after the other, playback will start with the last CD loaded. 6000CD and 6006CDC During radio reception, press the CD button once to start CD playback. Playback will start immediately after a disc is loaded. Sony CD During radio reception, press the CD/AUX button once to start CD playback. Playback will start immediately after a disc is loaded. COMPACT DISC SELECTION 6006CDC On multiple CD units, CD's are normally played sequentially in ascending order. You can, however, switch to a CD of your choice by pressing the preset button, which has the number corresponding to the disc you want to play. The display will show which CD is selected.

The unit remembers which CD's are available so it will not select a CD that it knows to be missing. If you select a missing CD using the preset buttons, NO CD will be shown in the display and playback will continue from the current disc. Note: If a selected CD is damaged or upside down, the warning CD ERROR flashes and the CD number is displayed. The unit then selects the next available CD. FAST FORWARD/REVERSE 6000CD and 6006CDC Press and hold the seek up or the seek down button to search forwards or backwards within the tracks on the disc. Sony CD Press and hold the left or right navigation button to search forwards or backwards within the tracks on the disc. SHUFFLE/RANDOM Random track playback, also known as shuffle, plays all tracks on a CD in random order. 6000CD and 6006CDC Note: When SHUFF CD is selected only the tracks on the current CD will be shuffled. When SHUF ALL is selected the tracks on all the CD's will be shuffled. 1. Press the MENU button repeatedly until SHUF is shown in the display.

2. Using the seek up or seek down button scroll through the display until SHUF ALL or SHUFF CD is shown in the display.

3. Using the seek up or seek down button

select the next track to shuffle if required.

149

Compact disc player

6000CD and 6006CDC Note: When selected, SCAN will be shown briefly in the display at the start of each track. 1. Press the MENU button repeatedly until SCAN is shown in the display.

2. Using the seek up or seek down button select either SCAN CD or SCAN ALL. 3. Press the seek up or seek down button again to continue listening to a track.

Sony CD 1. Press the SCAN button once to scan

2. Press the SCAN button again to select

each track.

SCAN OFF.

EJECTING COMPACT DISCS Note: Radio reception is restored automatically when the EJECT button is pressed. Note: If the EJECT button is pressed in error, press the button again to cancel. Note: If the CD is not removed it will be pulled back into the audio unit. 6000CD Press the EJECT button at any time and remove the CD. 6006CDC Press the EJECT button at any time and remove the CD being played or use a preset button to select the CD you want to remove. SELECT or SELECT CD followed by REMOVE CD will be shown in the display.

Note: With the function on, SHUFFLE will be shown in the display as each new track is selected. Sony CD 1. Press the MENU button. 2. Using the up or down navigation button

scroll through the display until SHUFFLE is shown in the display.

3. Use the left or right navigation button

to switch the function on and off.

COMPACT DISC TRACK COMPRESSION 6000CD and 6006CDC 1. Press MENU repeatedly until COMP is

shown in the display.

2. Using the seek up or seek down button

turn the function on or off.

3. Press the MENU button to confirm

your selection.

Sony CD 1. Press the MENU button. 2. Using the up or down navigation button scroll through the display until COMP is shown in the display.

3. Press the button between the

navigation buttons to make your selection.

4. Using the left or right navigation button

turn the function on or off.

5. Press the MENU button or the button

between the navigation buttons to confirm your selection.

COMPACT DISC TRACK SCANNING The SCAN function allows you to preview each track for approximately 10 seconds.

150

Compact disc player

Note: This will not eject the CD; the disc will merely pause at the point where radio reception was restored. To resume CD playback, press the CD button again. Sony CD Press the RADIO or CD/AUX button. Note: This will not eject the CD; the disc will merely pause at the point where radio reception was restored. To resume CD playback, press the CD/AUX button. EJECTING MULTIPLE COMPACT DISCS 6006CD Press and hold the EJECT button until EJECT ALL is shown in the display. The display will alternate between REMOVE and WAIT. When REMOVE is displayed, remove a disc from the unit. This routine repeats until all discs have been removed.

Sony CD Note: If no CD is loaded when the EJECT button is pressed, NO CD will be shown in the display. Press the EJECT button at any time and remove the CD. EJECTING and PLEASE REMOVE will be shown in the display. REPEAT COMPACT DISC TRACKS 6000CD 1. Press the MENU button repeatedly

until REPEAT is shown in the display. 2. Using the seek up or seek down button

choose between OFF and TRK.

6006CDC 1. Press the MENU button repeatedly

until REPEAT is shown in the display. 2. Using the seek up or seek down button choose between ALL (default),CD and TRK. Sony CD 1. Press the MENU button. 2. Using the up or down navigation buttons scroll through the display until REPEAT is shown in the display. 3. Using the left or right navigation

buttons select REPEAT TRACK or REPEAT OFF.

4. Press the MENU button to confirm

your selection.

ENDING COMPACT DISC PLAYBACK 6000CD and 6006CDC Press the AM/FM or AUX button.

151

Auxiliary input (AUX IN) socket

AUXILIARY INPUT (AUX IN) SOCKET Note: For optimum performance when using any auxiliary device set the volume on the device high. This will reduce audio interference when charging the device via the vehicle power supply socket. When fitted the Auxiliary input (AUX IN) socket permits an auxiliary device, such as an MP3 player, to be linked into the vehicle audio system. Output can be played through the vehicle speakers. To connect an auxiliary device, plug it into the AUX IN socket using a 3.5 mm conventional audio jack connector. Select the auxiliary input via the AUX button and playback will be heard through the vehicle speakers. AUX will be shown in the display. Volume, treble and bass can be adjusted on the audio unit as normal. The audio unit buttons can also be used to restore playback from the audio unit, while the auxiliary device remains connected.

152

Audio troubleshooting

AUDIO TROUBLESHOOTING

Audio unit display

Rectification

CD ERROR

PLEASE CHECK CD

CDC ERROR

NO CD NO CDS NO CD #

HIGH TEMP

CD DRIVE HIGH TEMP

SLOT FULL

CDC FULL

DATA CD

CODE ----

WAIT

TRIES

LOCKED

KEYCODE....

ENTER KEYCODE....

General error message for CD fault conditions, for example cannot read the CD, data-CD inserted. May also indicate a audio unit malfunction. Make sure that the disc is correctly loaded, clean and re- load the CD or replace the CD with a known music CD. See Ejecting compact discs (page 150). See Ejecting multiple compact discs (page 151). See Loading compact discs (page 148). If error continues. See your dealer. Message to indicate that the audio unit or CD changer is empty. Insert a CD. See Loading compact discs (page 148). Ambient temperature too hot – unit will not work until it has cooled down. Message to indicate that the CD slot is already loaded. Eject the CD from selected slot before attempting load operation or select another slot location. See Loading compact discs (page 148). Message to indicate that the audio unit is full. See Ejecting compact discs (page 150). See Ejecting multiple compact discs (page 151). An incompatible CD has been inserted, for example not an audio CD. See Ejecting compact discs (page 150). See Ejecting multiple compact discs (page 151). Message to prompt you for the Keycode. See Entering a security code (page 136). Message to inform you to wait until the next keycode entry attempt can be made. See Incorrect security code (page 136). Message indicates the number of incorrect input attempts. See Incorrect security code (page 136). Message to inform you that audio unit security system has locked the unit after repeated incorrect keycode entries. See your dealer. Message to prompt you for the Keycode. See Entering a security code (page 136).

153

Audio troubleshooting

Audio unit display

INCORRECT

Rectification

Message to inform you that the entered keycode is incorrect. See Incorrect security code (page 136).

154

Telephone

GENERAL INFORMATION This section describes the functions and features of the Bluetooth mobile phone and voice control system. The section covers the following variations: a mobile phone with a mobile phone • cradle without voice control a Bluetooth and voice control system with a mobile phone cradle a Bluetooth and voice control system without a mobile phone cradle.

•

•

audio system functions vehicle climate control functions.

The Bluetooth mobile phone part of the system provides interaction with the audio or navigation system and your mobile phone. It allows you to use the audio or navigation system to make and receive calls without having to use your mobile phone. The voice control part of the system can be used to control: • mobile phone calls • • Note: The mobile phone does not switch off immediately after the ignition key is turned off: the power down delay is preset to 10 minutes. The time period can be adjusted to between 0 and 60 minutes. This, depending on your mobile phone, can be achieved by creating a phonebook entry on your mobile phone with the name Timer and the required delay as it's number. If the Bluetooth and voice control is used for an extended period of time when the vehicle is stationary, make sure that the engine is running to avoid draining the battery

TELEPHONE SETUP Requirements for cradle connection Your phone must be fitted in a mobile phone holder before it can be used as a cradle phone with your handsfree/voice control system. You will be able to purchase the correct holder for your phone from your dealer. Placing your phone in the cradle Note: Your phone must be fitted in a mobile phone holder to allow you to connect the phone to the cradle. Connect your phone to the cradle. 1. Place the base of the phone in the

cradle connection.

Note: Make sure that the phone is pushed fully rearwards in the cradle. 2. Push the phone downwards until a

click is heard.

Note: The connection to the system will be displayed on your phone. Phonebook After start up access to the phonebook can be delayed for up to two minutes.

155

21E87688Telephone

Phonebook categories Depending on your phonebook entry, different categories can be displayed in the audio or navigation unit. For example:

Mobile Office Home Fax

Note: Entries may be displayed without a category attachment. The category can also be indicated as an icon:

Phone

Mobile

Home

Office

Fax

Making a phone an active phone When using the system for the first time, no phone is connected to the system. After switching on the ignition the cradle phone and the Bluetooth phone are recognized differently by the system.

Bluetooth phone After bonding a Bluetooth phone to the system, this becomes the active phone. For further information refer to the phone menu. However, in some cases the Bluetooth phone has to be activated by pressing the appropriate station button on the audio or navigation unit. Turning the ignition back on again, the last active phone is picked up by the system. Bond another Bluetooth phone Note: Before another Bluetooth phone can be bonded, the existing active Bluetooth connection has to be deactivated by the mobile phone. Bond a new Bluetooth phone as described in the requirements for a Bluetooth connection. Phones stored in the system are accessible by using the phone list on the audio or navigation unit. Note: If six (five Bluetooth phones for cradle phone system) Bluetooth phones have been bonded, one of these has to be deleted in order to bond a new phone. Cradle phone With your phone fitted in the mobile phone cradle this does not automatically become the active phone. In these cases refer to Changing the active phone in the appropriate section which describes the system fitted to your vehicle. BLUETOOTH SETUP Before you can use your telephone with your vehicle it must be bonded to the vehicle telephone system.

156

E87990E87991E87992E87993E87994Telephone

Handling of phones A phone can be connected to the vehicle system by using either a cradle connection or a Bluetooth connection. On vehicles with a mobile phone cradle, up to five Bluetooth phones can be bonded to the vehicle system. On vehicles without a mobile phone cradle, up to six Bluetooth phones can be bonded to the vehicle system. Note: If there is an ongoing call when the phone in use is selected as the new active phone, the call is transferred to the vehicle audio system. Note: Even if connected to the car system, your phone can still be used in the usual way. Requirements for Bluetooth connection The following are required before a Bluetooth phone connection can be made. 1. The Bluetooth feature must be

activated on the phone and on the audio unit. For additional information, refer to your phone user guide 2. The private mode must not be

activated on the Bluetooth phone.

3. Search for audio device. 4. Select Ford Audio. 5. The Bluetooth PIN number 0000 must

be entered on the phone keypad.

Note: A phone call will be disconnected if the audio/navigation system is switched off. If the ignition key is turned to the off position the phone call will remain in progress.

Compatibility of phones

CAUTION

As no common agreement exists, mobile phone manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibility can occur between the phone and hands-free system, which in some cases may significantly degrade the system performance. To avoid this situation, only recommended phones should be used. Please contact your dealer for more details regarding the current compatibility list.

Phones with Symbian operating system Note: Certain phones require a special file to be installed to enable full phonebook access via Bluetooth. This is referred to as a SIS file and will be available via the Ford website. Please consult your dealer for full details. TELEPHONE CONTROLS Ending or rejecting calls By pressing one of several function buttons on the audio or navigation unit (example: AM/FM,CD/AUX) active calls can be ended or incoming calls can be rejected. Remote control One of several different types of remote control may be fitted to your vehicle:

157

Telephone

Voice and mode button

Note: Some audio units have the accept/reject buttons on the front bezel. These operate in the same way. Mode button on the steering wheel

Voice button Mode button

Incoming calls can be accepted by pressing the MODE button once or ended by pressing twice. Voice and accept/reject button

Mode button only

Voice button Accept/Reject button

The VOICE button is used to activate or switch off the Voice control. On vehicles with an accept/reject button, phone calls can be accepted and rejected by pressing the appropriate button.

On vehicles without a VOICE button, the MODE button on the remote control is used to activate or switch off the voice control. Note: You will not be able to use the MODE button to activate the voice control during an incoming or active call. You will not be able to use the MODE button to control the audio system. USING THE TELEPHONE - VEHICLES WITHOUT: NAVIGATION SYSTEM This chapter describes the phone functions of the audio unit.

158

21E87661E8766221E87663E87664Telephone

Note: Refer to your audio guide for details of the controls. An active phone must be present. Even if connected to the audio unit, your phone can still be used in the usual way. Note: You can exit the phone menu by pressing any source button CD, AM/FM or AUX. Making a call Dialling a number You can access your phone address book either with the phone docked in the cradle or via Bluetooth. The entries will appear in the audio unit display. 1. Press the PHONE or the call accept

button.

2. Press the MENU button. 3. Keep pressing the MENU button until

PHONEBOOK appears.

4. Press the seek buttons to select the

desired phone number.

Note: Press and hold the seek button to skip to the next letter in the alphabet. 5. Press the PHONE or the call accept

button to dial the selected phone number.

If you have an audio unit with a telephone keypad (buttons 0-9, * and #), you can also direct dial by entering the number on the radio display via the keypad and pressing the call accept button: 1. Press the call accept button. 2. Dial the number using the telephone

keypad on the audio unit.

3. Press the call accept button. Note: If you enter an incorrect digit whilst entering a phone number, press the seek down button to erase the last digit. A long press will erase the complete string of digits.

•

Press and hold 0 to enter a + digit. Ending a call Calls can be ended by either: •

pressing one of the following buttons on the audio unit: PHONE, CD, AM/FM or ON/OFF pressing the MODE button on the remote control pressing the call reject button.

• Note: If you have an audio unit with a telephone keypad you can end a call only with the call reject button. Redialling a number 1. Press the PHONE or the call accept

button.

IN list.

2. Press the MENU button. 3. Select the CALL OUT list or the CALL

Note: If the active phone does not provide a call out list, the last outgoing call number/entry is displayed. 4. Press the seek button on the audio unit. 5. Press the PHONE or the call accept

button to dial the desired phone number.

Redialling the last dialled number Note: This applies to only audio units with a telephone keypad 1. Press the call accept button. 2. Press the call accept button again to

display the last dialled number.

3. Press the call accept button a third

time to dial the number.

Receiving an incoming call Accepting an incoming call Incoming calls can be accepted by either:

159

Telephone

• •

pressing the PHONE button pressing the MODE button on the remote control pressing the call accept button.

pressing the call reject button pressing the CD button pressing the AM/FM button.

• Rejecting an incoming call Incoming calls can be rejected by either: • • • Note: If you have an audio unit with a telephone keypad you can only reject a call with the call reject button. Note: You cannot reject an incoming call using the remote control. Handling a second incoming call Note: The second incoming call function must be activated in your phone. If there is an incoming call whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call. Accepting a second incoming call Second incoming calls can be accepted by either: • •

pressing the call accept button pressing the MODE button on the remote control pressing the PHONE button.

• Note: This will cancel the ongoing call. Rejecting a second incoming call Second incoming calls can be rejected by pressing either: • • •

pressing the call reject button pressing the CD button pressing the AM/FM button.

160

Note: If you have an audio unit with a telephone keypad you can only reject a call with the call reject button. Changing the active phone Note: Phones must be bonded to the system before they can be made active. Using the station storage button 1. Press the PHONE button on the audio

unit.

2. Press the preset number required

(using the station preset buttons 1 - 6).

Note: This process is only for audio units without a telephone keypad. Using the audio unit menu 1. Press the PHONE or call accept

button.

unit.

2. Press the MENU button on the audio

3. Select the ACTIVE PHONE option on

the audio unit.

4. Scroll through the different stored

phones by using the seek buttons to display the bonded phones.

5. Press the MENU button to select the phone which is to be the active phone. Note: After bonding a Bluetooth phone to the system, this becomes the active phone. Debonding a bonded phone A bonded phone can be deleted from the system at any time, unless a phone call is in progress. 1. Press the PHONE or call accept

2. Press the MENU button on the audio

3. Select the DEBOND option on the

button.

unit.

audio unit.

Telephone

Dialling a number - Bluetooth phone Using the Bluetooth phone, phone numbers can be dialled using voice control, refer to the Voice control chapter. Ending a call Calls can be ended by either: • pressing the reject button pressing the MODE button on the • remote switch pressing the off button on the navigation system pressing the right rotary entry control button.

•

•

Redialling a number - cradle phone 1. Press the PHONE button on the audio

unit.

2. Press the MENU button. 3. Select the CALL OUT list, CALL IN list

or REDIAL.

4. Press the PHONE button on the audio unit to dial the desired phone number. Redialling a number - Bluetooth phone 1. Press the PHONE button on the audio

unit.

2. Press the MENU button. 3. Select REDIAL. 4. Press the PHONE button on the audio

unit to dial the phone number. Handling an incoming call Accepting an incoming call Incoming calls can be accepted by either: • •

pressing the accept button pressing the MODE button on the remote control

4. Scroll through the different phones by using the seek buttons and display the phone to be debonded.

5. Press the MENU button to select the

phone which is to be debonded. USING THE TELEPHONE - VEHICLES WITH: TRAVEL PILOT EX This chapter describes the phone functions of the Navigation System TravelPilot EX. Note: Refer to your Navigation System TravelPilot EX guide for details of the controls. An active phone must be present. Even if connected to the Navigation System TravelPilot EX, your phone can still be used in the usual way. Making a call Dialling a number - cradle phone Using the cradle phone allows you to access your mobile phone address book. The entries will appear in the TravelPilot EX display. 1. Press the PHONE button on the audio

2. Using the PHONEBOOK option in the

unit.

menu.

3. Choose one of the letter areas. 4. Turning the right rotary entry control,

select the desired phone number.

5. By pressing the INFO button the details

of the phonebook entry can be displayed.

6. Press the right rotary entry control

button.

161

Telephone

•

pressing the PHONE button on the audio unit using the ACCEPT option in the menu.

• Rejecting an incoming call Incoming calls can be rejected by either: • •

pressing the reject button pressing one of the following buttons on the audio unit: CD, AM/FM using the REJECT option in the menu. • Note: You cannot reject an incoming call using the remote control MODE button. Handling a second incoming call Note: The second incoming call function must be activated in your phone. If there is an incoming call, whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call. Accepting a second incoming call Second incoming calls can be accepted by either: • Pressing the accept button. • Pressing the MODE button on the

remote control.

• Pressing the PHONE button on the

audio unit.

• Using the ACCEPT option in the menu. Note: This will cancel the ongoing call. Rejecting a second incoming call Second incoming calls can be rejected by pressing either: • •

The teject button one of the following buttons on the audio unit: CD, AM/FM.

Changing the active phone Note: Phones must be bonded to the system before they can be made active. 1. Press the PHONE button on the audio

unit.

2. Using the ACTIVE PHONE option in the menu, select the active phone from the list using the preset buttons. Debonding a bonded phone A bonded phone can be deleted from the system at any time, unless a phone call is in progress. 1. Press the PHONE button on the audio

2. Select the DEBOND option in the

unit.

menu.

3. Select the phone from the list by using

the preset buttons.

Note: After bonding a Bluetooth phone to the system, this becomes the active phone. However, in some cases the Bluetooth phone has to be activated by pressing the appropriate station button on the audio or navigation unit.

162

Voice control

PRINCIPLE OF OPERATION Voice recognition enables operation of the audio system without the need to divert your attention from the road ahead in order to change settings, or receive feedback from the system. Whenever you issue one of the defined commands with the system active, the voice recognition system converts your command into a control signal for the audio system. Your inputs take the form of dialogues or commands. You are guided through these dialogues by announcements or questions. Please familiarise yourself with the functions of the audio system before using voice recognition. Note: If the Bluetooth and voice control is used for an extended period of time when the vehicle is stationary, make sure that the engine is running to avoid draining the battery. Supported commands The voice control system allows you to control the following vehicle functions: • • • CD Player • • Note: The voice control system is language specific. If you require the system to operate in another language please consult your dealer. System response As you work through a voice session the system will prompt you with a beep tone each time the system is ready to proceed.

climate control navigation system.

phone radio

Do not try to give any commands until the beep tone has been heard. The voice control system will repeat each spoken command back to you. If you are not sure how to continue say "HELP" for assistance or "CANCEL" if you do not wish to continue. The "HELP" function provides only a subset of the available voice commands. Detailed explanations of all possible voice commands can be found on the following pages. Voice commands All voice commands should be given using a natural speaking voice, as if speaking to a passenger or on the phone. Your voice level should be dependant on the surrounding noise level inside or outside the vehicle but do not shout. Name tag The name tag functionality can support the phone, audio and navigation features by using the "STORE NAME" function. • •

Store up to 20 name tags per function. The average recording time for each name tag is approximately 2-3
seconds.

USING VOICE CONTROL System operation The order and content of the voice controls are given in the following lists. The tables show the sequence of user voice commands and system responses for each available function. <> indicates a number or stored name tag to be inserted by the user.

163

Voice control

Short cuts There are a number of voice command short cuts available, which allow you to control some vehicle features without having to follow the complete command menu. These are: •

phone: "MOBILE NAME"1, "DIAL NUMBER", "DIAL NAME" and "REDIAL"

• CD player: "DISC" and "TRACK" •

climate control: "TEMPERATURE", "FAN", "AUTO MODE", "DEFROSTING/DEMISTING ON" and "DEFROSTING/DEMISTING OFF" radio: "TUNE NAME" navigation: "ZOOM" and "ROUTE SETTING".

• •

1) Only when the mobile phone is fitted with Bluetooth and voice control Start communicating with the system Before you can start talking to the system you first have to press the VOICE or MODE button for each operation and wait until the system answers with a beep.

AUDIO UNIT COMMANDS CD Player/CD Changer You can choose a disc or track directly by voice control. Overview The overview below shows the available voice commands for operating your CD player. The following lists will give further information about the complete command menu.

"CD" "HELP" "DISC"a

164

E87665Voice control

"CD"

"TRACK"b

a) Can only be used with a CD changer. b) Can be used as a shortcut.

Disc If you have a CD changer you can choose the disc number.

Steps

User says

"CD" "DISC"a

System answer

"CD"

"DISC NUMBER PLEASE"

""

""