Download PDF Manual

• Active guidelines: Show the intended path of your vehicle when reversing. Fixed guidelines: Show the actual path your vehicle is moving in while reversing in a straight line. This can be helpful when backing into a parking space or aligning your vehicle with another object behind you.


After changing a system setting, the touch screen shows a preview of the selected features. Camera Guidelines Note: Fixed guidelines are only available when the transmission is in reverse (R). Note: The centerline is only available if Active or Fixed guidelines are on.


• Centerline: Helps align the center of


your vehicle with an object (for example, a trailer).


Note: If the transmission is in reverse (R) and the luggage compartment is ajar, no rear view camera features are displayed. Note: If the image comes on while the transmission is not in reverse (R), have the system inspected by your authorized dealer. Note: When towing, the camera only sees what is being towed behind your vehicle. This might not provide adequate coverage as it usually provides in normal operation and some objects might not be seen. In some vehicles, the guidelines may disappear once the trailer tow connector is engaged. Note: The camera may not operate correctly under the following conditions: • Nighttime or dark areas if one or both




reverse lamps are not operating. The camera's view is obstructed by mud, water or debris. Clean the lens with a soft, lint-free cloth and non-abrasive cleaner. The rear of your vehicle is hit or damaged, causing the camera to become misaligned.


To access any of the rear view camera system settings, make the following selections in the touch screen when the transmission is not in reverse (R): • Menu > Vehicle > Rear View Camera


173


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Active guidelines Centerline Fixed guideline: Green zone Fixed guideline: Yellow zone Fixed guideline: Red zone Rear bumper


ABCDFEE142436 Parking Aids


Note: Manual zoom is only available when the transmission is in reverse (R). Note: When manual zoom is enabled, only the centerline is shown. This allows you to get a closer view of an object behind your vehicle. The zoomed image keeps the bumper in the image to provide a reference. The zoom is only active while the transmission is in reverse (R). When the transmission is shifted out of reverse (R), the feature automatically turns off and must be reset when it is used again. Selectable settings for this feature are + and -. The default setting for the manual zoom is OFF. Rear Camera Delay (If Equipped) When you shift the transmission out of reverse (R) and into any gear while the rear camera delay is active, the camera image displays until: •


Your vehicle speed sufficiently increases. You shift your vehicle into park (P).


• Selectable settings for this feature are ON and OFF. The default setting for the rear camera delay is OFF.


Active guidelines are only shown with fixed guidelines. To use active guidelines, turn the steering wheel to point the guidelines toward an intended path. If the steering wheel position is changed while reversing, your vehicle might deviate from the original intended path. The fixed and active guidelines fade in and out depending on the steering wheel position. The active guidelines are not shown when the steering wheel position is straight. Always use caution while reversing. Objects in the red zone are closest to your vehicle and objects in the green zone are farther away. Objects are getting closer to your vehicle as they move from the green zone to the yellow or red zones. Use the side view mirrors and rear view mirror to get better coverage on both sides and rear of your vehicle. Enhanced Park Aids Note: Enhanced park aids is only available when the transmission is in reverse (R). Note: The reverse sensing system is not effective at speeds above 7 mph (12 km/h) and may not detect certain angular or moving objects. The system uses red, yellow and green highlights which appear on top of the video image when an object is detected by the reverse sensing system. The alert highlights the closest object detected. Selectable settings for this feature are ON and OFF. Manual Zoom


WARNING


When manual zoom is on, the full area behind your vehicle is not shown. Be aware of your


surroundings when using the manual zoom feature.


174


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Cruise Control


Switching Cruise Control On Press and release ON.


The indicator will display in the instrument cluster.


Setting a Speed 1. Accelerate to the desired speed. 2. Press and release SET+. 3. Take your foot off the accelerator


pedal.


Changing the Set Speed • Press and hold SET+ or SET-. Release the control when you reach the desired speed.


• Press and release SET+ or SET-. The set speed will change in approximately 1 mph (2 km/h) increments.


• Press the accelerator or brake pedal


until you reach the desired speed. Press and release SET+.


Note: When you are going downhill while using cruise control, your battery charging system and engine work together to help maintain your set speed. Engine noise may increase or decrease under these conditions. Canceling the Set Speed Pull CAN toward you and release, or tap the brake pedal. The set speed will not be erased. Resuming the Set Speed Pull RES toward you and release. Note: When you are going downhill while using cruise control, your battery charging system and engine work together to help maintain your set speed. Engine noise may increase or decrease under these conditions.


PRINCIPLE OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. You can use cruise control when your vehicle speed is greater than 20 mph (30 km/h). USING CRUISE CONTROL


WARNINGS


Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could


result in loss of vehicle control, serious injury or death.


When you are going downhill, your vehicle speed may increase above the set speed. The system will not apply the brakes. Change down a gear to assist the system in maintaining the set speed. Failure to do so could result in loss of vehicle control, serious injury or death.


Note: Cruise control will disengage if your vehicle speed decreases more than 10 mph (16 km/h) below your set speed while driving uphill.


The cruise controls are located on the steering wheel.


175


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E142437E71340 Cruise Control


Switching Cruise Control Off Note: You will erase the set speed if you switch the system off. Press and release OFF or switch the ignition off. ECO Cruise Control This feature saves vehicle energy by relaxing acceleration compared to standard cruise control. For example, your vehicle may temporarily lose speed when going uphill. ECO will appear in the information display when ECO cruise control is activated. It can be switched on or off in the information display. See (page 91).


176


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Driving Aids


Loose or worn steering components. Improper vehicle alignment.


• • Note: A high crown in the road or high crosswinds may also make the steering seem to wander or pull. Adaptive Learning The electronic power steering system adaptive learning helps correct road irregularities and improves overall handling and steering feel. It communicates with the brake system to help operate advanced stability control and accident avoidance systems. Additionally, whenever the battery is disconnected or a new battery installed, you must drive your vehicle a short distance before the system relearns the strategy and reactivates all systems.


STEERING Electric Power Steering


WARNING


The electric power steering system has diagnostic checks that continuously monitor the system. If a fault is detected, a message displays in the information display. Stop your vehicle as soon as it is safe to do so. Switch the ignition off. After at least 10 seconds, switch the ignition on and watch the information display for a steering system warning message. If a steering system warning message returns, have the system checked by an authorized dealer.


Your vehicle has an electric power steering system. There is no fluid reservoir. No maintenance is required. If your vehicle loses electrical power while you are driving, electric power steering assistance is lost. The steering system still operates and you can steer your vehicle manually. Manually steering your vehicle requires more effort. Extreme continuous steering may increase the effort required for you to steer your vehicle. This increased effort prevents overheating and permanent damage to the steering system. You do not lose the ability to steer your vehicle manually. Typical steering and driving maneuvers allow the system to cool and return to normal operation. Steering Tips If the steering wanders or pulls, check for: • Correct tire pressures. • Uneven tire wear. •


Loose or worn suspension components.


177


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Load Carrying


REAR UNDER FLOOR STORAGE


Insert the ends of the cargo shade into the mounting features located behind the rear seat on the rear trim panels to install the cargo shade. To operate the cargo shade: 1. Pull the rear edge of the cargo shade


rearward.


2. Secure both ends of the support rod into the retention slots located on the rear quarter trim panels.


Removing the Shade


Press the release lever on each side forward, and then lift the shade out of the mounting feature. You will see a red mark when the lever is unlatched.


The under floor storage compartments are located behind the front seats. Lift the handle to unlatch the lid. LUGGAGE COVERS WARNINGS


Make sure that the posts are properly latched in mounting features. The cover may cause injury in a sudden


stop or accident if it is not securely installed.


Do not place any objects on the cargo area shade. They may obstruct your vision or strike occupants of your vehicle in a sudden stop or crash.


Use the cargo shade to cover items in the cargo area of your vehicle.


178


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E162198E164183E162195 Load Carrying


LOAD LIMIT Vehicle Loading - with and without a Trailer This section will guide you in the proper loading of your vehicle, trailer or both, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading your vehicle will provide maximum return of vehicle design performance. Before loading your vehicle, familiarize yourself with


the following terms for determining your vehicle’s weight ratings, with or without a trailer, from the vehicle’s Tire Label or Safety Compliance Certification Label: Base Curb Weight - is the weight of the vehicle including full fluids and all standard equipment. It does not include passengers, cargo, or optional equipment. Vehicle Curb Weight - is the weight of your new vehicle when you picked it up from your authorized dealer plus any aftermarket equipment.


Payload - is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be found on the Tire Label on the B-Pillar or the edge of the driver door (vehicles exported outside the US and Canada may not have a Tire Label). Look for “THE COMBINED WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER EXCEED XXX


kg OR XXX lb.” for maximum payload. The payload listed on the Tire Label is the maximum payload for the vehicle as built by the assembly plant. If you install any aftermarket or authorized-dealer installed equipment on the vehicle, you must subtract the weight of the equipment from the payload listed on the Tire Label in order to determine the new payload.


179


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E143816PAYLOAD Load Carrying


WARNING


The appropriate loading capacity of your vehicle can be limited either by volume capacity (how much space is available) or by payload capacity (how much weight the vehicle should carry). Once you have reached the maximum payload of your vehicle, do not add more cargo, even if there is space available. Overloading or improperly loading your vehicle can contribute to loss of vehicle control and vehicle rollover. Example only:


180


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E142516E142517 Load Carrying


Cargo Weight - includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight. GAW (Gross Axle Weight) - is the total weight placed on each axle (front and rear) including vehicle curb weight and all payload.


GAWR (Gross Axle Weight Rating) - is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label. The label shall be affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver's seating position. The total load on each axle must never exceed its Gross Axle Weight Rating. Note: For trailer towing information refer to the RV and Trailer Towing Guide available at an authorized dealer.


181


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E143817CARGOE143818GVW Load Carrying


GVW (Gross Vehicle Weight) - is the Vehicle Curb Weight, plus cargo, plus passengers. GVWR (Gross Vehicle Weight Rating) - is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). It is shown on the Example only:


Safety Compliance Certification Label. The label shall be affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver's seating position. The Gross Vehicle Weight must never exceed the Gross Vehicle Weight Rating.


182


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E142523E142524 Load Carrying


WARNING


Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury.


GCW (Gross Combined Weight) - is the Gross Vehicle Weight plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) - is the maximum allowable weight of the vehicle and the loaded trailer, including all cargo and passengers, that the vehicle can handle without risking damage. (Important: The towing vehicle’s braking system is rated for operation at Gross Vehicle Weight Rating, not at Gross Combined Weight Rating.) Separate functional brakes should be used for safe control of towed vehicles and for trailers where the Gross Combined Weight of the


towing vehicle plus the trailer exceed the Gross Vehicle Weight Rating of the towing vehicle. The Gross Combined Weight must never exceed the Gross Combined Weight Rating. Maximum Loaded Trailer Weight - is the highest possible weight of a fully loaded trailer the vehicle can tow. It assumes a vehicle with mandatory options, driver and front passenger weight (150 pounds [68 kilograms] each), no cargo weight (internal or external) and a tongue load of 10–15% (conventional trailer) or king pin weight of 15–25% (fifth wheel trailer). Consult an authorized dealer (or the RV and Trailer Towing Guide available at an authorized dealer) for more detailed information.


183


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E143819GCWGVW Load Carrying


3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lb.


4. The resulting figure equals the


available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1,400 lb. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lb. (1400-750 (5 x 150) = 650 lb.)


5. Determine the combined weight of


luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.


6.


The following gives you a few examples on how to calculate the available amount of cargo and luggage load capacity: *Suppose your vehicle has a 1400-pound (635-kilogram) cargo and luggage capacity. You decide to go golfing. Is there enough load capacity to carry you, four of your friends and all the golf bags? You and four friends average 220
pounds (99 kilograms) each and the golf bags weigh approximately 30 pounds (13.5 kilograms) each. The calculation would be: 1400 - (5 x 220) - (5 x 30) = 1400 - 1100
- 150 = 150 pounds. Yes, you have enough load capacity in your


Tongue Load or Fifth Wheel King Pin Weight - refers to the amount of the weight that a trailer pushes down on a trailer hitch. Examples: For a 5000 pound (2268 kilogram) conventional trailer, multiply 5000 by 0.10 and 0.15 to obtain a proper tongue load range of 500 to 750 pounds (227 to 340 kilograms). For an 11500 pound (5216 kilogram) fifth wheel trailer, multiply by 0.15 and 0.25 to obtain a proper king pin load range of 1725 to 2875 pounds (782 to 1304 kilograms).


WARNINGS


Do not exceed the GVWR or the GAWR specified on the Safety Compliance Certification Label. Do not use replacement tires with lower load carrying capacities than the original tires because they may


lower the vehicle’s GVWR and GAWR limitations. Replacement tires with a higher limit than the original tires do not increase the GVWR and GAWR limitations.


Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or


personal injury. Steps for determining the correct load limit: 1. Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lb." on your vehicle’s placard.


2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.


184


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Load Carrying


900 = 60 pounds. Now you have the load capacity to transport the cement and your friend home. In metric units, the calculation would be: 635 kilograms - (2 x 99
kilograms) - (9 x 45 kilograms) = 635 - 198 - 405 = 32 kilograms. The above calculations also assume that the loads are positioned in your vehicle in a manner that does not overload the Front or the Rear Gross Axle Weight Rating specified for your vehicle on the Safety Compliance Certification Label. The label shall be affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver's seating position.


vehicle to transport four friends and your golf bags. In metric units, the calculation would be: 635
kilograms - (5 x 99 kilograms) - (5 x 13.5 kilograms) = 635 - 495 - 67.5 = 72.5 kilograms. *Suppose your vehicle has a 1400-pound (635-kilogram) cargo and luggage capacity. You and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past two years. Measuring the inside of the vehicle with the rear seat folded down, you have room for twelve 100-pound (45-kilogram) bags of cement. Do you have enough load capacity to transport the cement to your home? If you and your friend each weigh 220 pounds (99 kilograms), the calculation would be: 1400 - (2 x 220) - (12 x 100) = 1400 - 440
- 1200 = - 240 pounds. No, you do not have enough cargo capacity to carry that much weight. In metric units, the calculation would be: 635 kilograms - (2 x 99
kilograms) - (12 x 45 kilograms) = 635 - 198 - 540 = -103 kilograms. You will need to reduce the load weight by at least 240 pounds (104 kilograms). If you remove three 100-pound (45-kilogram) cement bags, then the load calculation would be: 1400 - (2 x 220) - (9 x 100) = 1400 - 440 -


185


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Towing


We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. Vehicle damage may occur if towed incorrectly, or by any other means. Ford Motor Company produces a towing manual for all authorized tow truck operators. Have your tow truck operator refer to this manual for proper hook-up and towing procedures for your vehicle. The front wheels (drive wheels) must be on a tow dolly when towing your vehicle from the rear using wheel lift equipment. This prevents damage to the transmission. We recommend placing the rear wheels on a tow dolly when towing your vehicle from the front using wheel lift equipment. This prevents damage to the rear fascia. TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing


WARNING


If your vehicle has a steering wheel lock make sure the ignition is in the accessory or on position when being


towed.


If your vehicle becomes inoperable (without access to wheel dollies, car-hauling trailer, or flatbed transport vehicle), it can be flat-towed (all wheels on the ground, regardless of the powertrain and transmission configuration) under the following conditions: • •


Tow only in the forward direction. The transmission in position N. If you cannot move the transmission into N, you may need to override it. See Automatic Transmission (page 157).


TOWING A TRAILER WARNING


Your vehicle is not approved for trailer towing. Never tow


a trailer with your vehicle. TRANSPORTING THE VEHICLE


If you need to have your vehicle towed, contact a professional towing service or, if you are a member of a roadside assistance program, your roadside assistance service provider.


186


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E143886 Towing


Vehicles with Ignition Key 1. Start the vehicle by pressing the brake pedal, and then turning the ignition key until the vehicle starts.


2. Press the brake pedal and shift the


transmission into position N.


3. Turn the vehicle off by turning the


ignition key past the accessory position. The key position is between the accessory and off positions. See Ignition Switch (page 127). (Trip Summary appears in the left instrument cluster screen when the vehicle is off.)


Note: If your vehicle is equipped with an ignition key, you cannot remove the key from the ignition cylinder when the transmission is in position N and the vehicle is off. All Vehicles • Do not exceed 70 mph (113 km/h). • Place the transmission in position P, start the vehicle, and allow the engine to run for one minute at the beginning of each day (you may need to press the accelerator pedal in order to start the engine). After allowing the vehicle to run, place the transmission back into position N and the ignition in the off position.


Note: A SHIFT TO PARK or TRANSMISSION NOT IN PARK message may appear in the information display when the transmission is in position N and the ignition is in the off position.


• Maximum speed is 35 mph (56 km/h). • Maximum distance is 50 miles (80


kilometers).


Recreational Towing Note: Put your climate control system in recirculated air mode to prevent exhaust fumes from entering the vehicle. See Climate Control (page 107). Follow these guidelines if you have a need for recreational (RV) towing. An example of recreational towing would be towing your vehicle behind a motorhome. We designed these guidelines to prevent damage to your transmission. You can tow your vehicle with all four wheels on the ground or with the front wheels off the ground by using a tow dolly. If you are using a tow dolly follow the instructions specified by the equipment provider. If you tow your vehicle with all four wheels on the ground: • • Release the parking brake. Vehicles with Push Button Start 1. Start the vehicle by pressing the brake pedal, and then pressing the ENGINE START/STOP button until the vehicle starts.


Tow only in the forward direction.


2. Press the brake pedal and shift the


transmission into position N.


3. Turn the vehicle off by pressing the ENGINE START/STOP button once. (Trip Summary appears in the left instrument cluster screen when the vehicle is off.)


Note: You can remove the key fob from the vehicle while towing.


187


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Driving Hints



Switch off the air conditioning if you do not need it. When you have the air conditioning on, keep it at the lowest blower and highest temperature setting necessary to be comfortable.


• When it is hot or sunny outside, parking


in a shaded or climate-controlled environment will save fuel by reducing the energy needed to cool the cabin. For the C-MAX Energi, use preconditioning to improve your fuel economy. See High Voltage Battery (page 149). Switch off the heated seats if you are not using them. Switch off the defroster when you no longer need it for visibility. For the C-MAX Energi, plug in and recharge the high voltage battery whenever possible.






• Use ECO Cruise Control, especially in


hilly terrain. For information on enabling eco-cruise, See Cruise Control (page 175). Shift into low gear (L) when enhanced engine braking is needed. Otherwise, use drive gear (D) shift position. • Combine errands and minimize



stop-and-go driving. A warmed up engine works more efficiently. When running errands, go to the farthest destination first and then work your way back home.


• Close the windows for high-speed


driving.


• Use the recommended engine oil. See Capacities and Specifications (page 275).


BREAKING-IN You need to break in new tires for approximately 300 miles (480
kilometers). During this time, your vehicle may exhibit some unusual driving characteristics. The engine also needs to break in. Avoid hard accelerations and driving too fast for the first 1000 miles (1600 kilometers). If possible, avoid carrying heavy loads up steep grades during the break-in period. ECONOMICAL DRIVING Your fuel economy depends on: • How you drive your vehicle. • How you maintain your vehicle. •


The conditions you drive your vehicle in.


You may improve your fuel economy by keeping these in mind: • Drive your vehicle at reasonable


speeds. Traveling at 65 mph (105 km/h) uses about 15% less fuel than traveling at 75 mph (121 km/h).


• Drive at steady speeds without


stopping.


• Anticipate stops. Slowing down your




vehicle may eliminate the need to stop. Keep the tires properly inflated and use only the recommended size. Switch off the heater if you do not need it. When you have the heater on, keep it at the lowest blower and temperature setting necessary to be comfortable.


• When it is cold outside, park in a sunny


location or a climate-controlled environment. This may save fuel by reducing the energy needed to heat the cabin.


188


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Driving Hints


DRIVING THROUGH WATER


WARNING


Do not drive through flowing or deep water as you may lose control of your vehicle.


Note: Driving through standing water can cause vehicle damage. Note: Engine damage can occur if water enters the air filter. Before driving through standing water, check the depth. Never drive through water that is higher than the bottom of the front rocker area of your vehicle.


When driving through standing water, drive very slowly and do not stop your vehicle. Your brake performance and traction may be limited. After driving through water and as soon as it is safe to do so: •


Lightly press the brake pedal to dry the brakes and to check that they work.


• Check that the horn works. • Check that the exterior lights work. •


Turn the steering wheel to check that the steering power assist works.


• Perform all regularly scheduled maintenance. See Scheduled Maintenance (page 420).


• Use the coach and brake coach display


to get feedback on your economical drive style. For more information, See Information Displays (page 91).


Avoid these actions because they reduce your fuel economy: • Avoid sudden or hard accelerations and


decelerations. Accelerate and slow down in a smooth, moderate fashion.


• Avoid revving the engine before


switching off your vehicle.


• Avoid long idle periods. • Do not warm up your vehicle on cold


mornings.


• Do not rest your foot on the brake


pedal while driving.


• Avoid carrying unnecessary weight. Approximately 1 mile per gallon (0.4
kilometers per liter) is lost for every 400 lb (180 kg) of weight carried.


• Avoid adding accessories that increase aerodynamic drag to your vehicle such as bug deflectors, car top carriers and ski or bike racks.


• Avoid driving with the wheels out of


alignment.


Things to keep in mind when you refuel your vehicle: •


Fuel generates fewer vapors when it is cool and dark outside. Refuel your vehicle in the early morning or late evening.


• Use the recommended octane-rated


fuel. Using fuel below the recommended rating will lower your fuel economy.


189


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E176360 Driving Hints


FLOOR MATS


WARNINGS


Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that


leave the pedal area unobstructed. Only use floor mats that are firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.


WARNINGS


Always make sure that objects cannot fall into the driver foot well while the vehicle is moving. Objects that are loose can become trapped under the pedals causing a loss of vehicle control. Failure to properly follow floor mat installation or attachment instructions can potentially cause


interference with pedal operation causing a loss of vehicle control.


To install floor mats, position the floor mat so that the eyelet is over the retention post and press down to lock in. To remove the floor mat, reverse the installation procedure.


Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal


injury.


Always make sure that the floor mats are properly attached to the retention posts in the carpet that are supplied with your vehicle. Floor mats must be properly secured to both retention posts to make sure mats do not shift out of position.


Never place floor mats or any other covering in the vehicle foot well that cannot be properly secured to


prevent them from moving and interfering with the pedals or the ability to control the vehicle.


Never place floor mats or any other covering on top of already installed floor mats. Floor mats should always rest on top of vehicle carpeting surface and not another floor mat or other covering. Additional floor mats or any other covering will reduce the pedal clearance and potentially interfere with pedal operation. Check attachment of floor mats on a regular basis. Always properly reinstall and secure floor mats that


have been removed for cleaning or replacement.


190


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E142666 Roadside Emergencies


ROADSIDE ASSISTANCE Vehicles Sold in the United States: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty. The service is available: • •


24 hours a day, seven days a week. For the coverage period listed on the Roadside Assistance Card included in your Owner's Manual portfolio.


Roadside Assistance covers: • A flat tire change with a good spare, if


provided with the vehicle (except vehicles supplied with a tire inflation kit). Battery jump start. Lock-out assistance (key replacement cost is the customer's responsibility). Fuel delivery — independent service contractors, if not prohibited by state, local or municipal law, shall deliver up to 2 gal (7.6 L) of gasoline or 5 gal (18.9 L) of diesel fuel to a disabled vehicle. Roadside Assistance limits fuel delivery service to two no-charge occurrences within a 12-month period.


• Winch out — available within 100 ft


(30.5 m) of a paved or county maintained road, no recoveries. Towing — independent service contractors, if not prohibited by state, local or municipal law, shall tow Ford eligible vehicles to an authorized dealer within 35 mi (56 km) of the disablement location or to the nearest


• •




authorized dealer. If a member requests a tow to an authorized dealer that is more than 35 mi (56 km) from the disablement location, the member shall be responsible for any mileage costs in excess of 35 mi (56 km).


Roadside Assistance includes up to $200
for a towed trailer if the disabled eligible vehicle requires service at the nearest authorized dealer. If the towing vehicle is operational but the trailer is not, then the trailer does not qualify for any roadside services. Vehicles Sold in the United States: Using Roadside Assistance Complete the roadside assistance identification card and place it in your wallet for quick reference. This card is in the owner's information portfolio in the glove compartment. United States Ford vehicle customers who require Roadside Assistance, call 1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford Motor Company reimburses a reasonable amount for towing to the nearest dealership within 35 mi (56 km). To obtain reimbursement information, United States Ford vehicle customers call 1-800-241-3673. Customers need to submit their original receipts. Vehicles Sold in Canada: Getting Roadside Assistance Canadian customers who require roadside assistance, call 1-800-665-2006. Vehicles Sold in Canada: Using Roadside Assistance For your convenience, you may complete the roadside assistance identification card found in the centerfold of your warranty guide and retain for future reference.


191


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Roadside Emergencies


The hazard warning button is located on the instrument panel. Use it when your vehicle is


creating a safety hazard for other motorists. • Press the button to turn on the hazard


warning function, and the front and rear direction indicators will flash.


• Press the button again to turn them


off.


FUEL SHUTOFF


WARNING


Failure to inspect and, if necessary, repair fuel leaks after a collision may increase the risk of fire and serious injury. Ford Motor Company recommends that the fuel system be inspected by an authorized dealer after any collision.


In the event of a moderate to severe collision, this vehicle has a fuel pump shut-off feature that stops the flow of fuel to the engine. Not every impact will cause a shut-off. Should your vehicle shut off after a collision, you may restart your vehicle. For vehicles equipped with a key system: 1. Switch off the ignition. 2. Switch on the ignition. 3. Check the information display for the


Ready to Drive light as the gasoline engine may not start, but the electric motor may be running. If you do not see the Ready to Drive light, repeat Steps 1 and 2 up to two more times.


For vehicles equipped with a push button start system: 1. Press the push button start to switch


off the ignition.


Canadian roadside coverage and benefits may differ from the U.S. coverage. If you require more information, please refer to the coverage section of your warranty guide, call us in Canada at 1-800-665-2006, or visit our website at www.ford.ca. Sykes Assistance Services Corporation administers the Roadside Assistance program. You must receive covered services in Canada or the continental United States. Coverage extends to vehicles that use public, non-seasonal, annually traveled roadways. Roadside Assistance coverage does not extend to vehicles involved in cross-country driving, logging, autocross and any other form of off-road use. Well maintained roads and surfaces help ensure safe travel for the supplier, and allow their representatives to perform service as per the standard operating procedures. In Remote Locations If our supplier cannot take your vehicle by road to the nearest authorized dealership, transportation by rail or water may be necessary. The program covers a tow to the dock or rail terminal and also to the dealership at the end of the trip. For rail or water transportation, however, contact your authorized dealer to confirm if you are eligible for additional coverage before you authorize or pay for the service. Call Ford Roadside Assistance at 1-800-665-2006 for additional information. HAZARD WARNING FLASHERS Note: If used when the vehicle is not running, the battery will lose charge. There may be insufficient power to restart your vehicle.


192


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Roadside Emergencies


Do not attempt to push-start your automatic transmission vehicle. Automatic transmissions do not have push-start capability. Attempting to push-start a vehicle with an automatic transmission may cause transmission damage. Preparing Your Vehicle Note: Use only a 12-volt supply to start your vehicle. Note: Do not disconnect the battery of the disabled vehicle as this could damage the vehicle's electrical system. 1. Park the booster vehicle close to the hood of the disabled vehicle making sure the two vehicles do not touch. Set the parking brake on both vehicles and stay clear of the engine cooling fan and other moving parts.


2. Check all battery terminals and remove


any excessive corrosion before you attach the battery cables. Ensure that vent caps are tight and level.


3. Turn the heater fan on in both vehicles


to protect from any electrical surges. Turn all other accessories off.


Connecting the Jumper Cables Your vehicle has a 12-volt battery that has two prongs accessible from under the hood. Your vehicle can be jumped the same way conventional vehicles can by using these prongs. The illustration below shows the two connector prongs used for jump-starting your vehicle.


2. Press the brake pedal and press the


push button start to switch on the ignition.


3. Check the information display for the


Ready to Drive light as the gasoline engine may not start, but the electric motor may be running. If you do not see the Ready to Drive light, repeat Steps 1 and 2 up to two more times.


Note: When you try to restart your vehicle after a fuel shutoff, the vehicle makes sure that the electrical system is safe to restart. Once your vehicle determines that the electrical system is safe, then the vehicle will allow you to restart. Note: In the event that your vehicle does not restart after your third attempt, contact an authorized dealer. JUMP STARTING THE VEHICLE


WARNINGS


The gases around the battery can explode if exposed to flames, sparks or lit cigarettes. An explosion could


result in injury or vehicle damage.


Batteries contain sulfuric acid which can burn skin, eyes and clothing, if contacted.


193


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Roadside Emergencies


A. Positive prong (+) B. Negative prong (-) Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Note: Remove the red cap from the positive prong (A) on your vehicle before connecting the cables.


1. Connect the positive (+) jumper cable


to the positive (+) prong (A) of the discharged battery.


2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery.


3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery.


4. Make the final connection of the


negative (-) cable to the negative (-) prong (B) of your vehicle.


Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake manifold or electrical components. These items should not be considered grounding points.


WARNING


Never connect the negative end of the cable to the negative (-) terminal of the discharged battery. A spark


may cause an explosion of the gases that surround the battery. Always use the negative prong as a grounding point.


Make sure that the cables are clear of fan blades, belts, the moving parts of both engines, or any fuel delivery system parts. Jump Starting 1. Start the booster vehicle and press the


accelerator pedal moderately.


194


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E192363E148861 Roadside Emergencies


2. Start the disabled vehicle. Check the


instrument cluster for the Ready to Drive light as the gasoline engine may not start, but the electric motor may be running.


3. Once you start the disabled vehicle, run


both vehicles for an additional three minutes before disconnecting the jumper cables.


Removing the Jumper Cables Remove the jumper cables in the reverse order that they were connected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery.


2. Remove the jumper cable on the


negative (-) terminal of the booster vehicle's battery.


3. Remove the jumper cable from the positive (+) terminal of the booster vehicle's battery.


4. Remove the jumper cable from the positive (+) prong of the disabled vehicle's battery.


After disconnecting the jumper cables, let the disabled vehicle sit in Ready to Drive mode for several minutes to charge the 12V battery. The disabled vehicle can charge the 12V battery even if the gasoline engine may be off. The 12V battery will receive power from the high-voltage battery instead. COLLISION, DAMAGE OR FIRE EVENT Guidance for Ford Motor Company Electric and Hybrid-Electric Vehicles Equipped With High Voltage Batteries (Vehicle Owner/Operator/General Public) Electric and Hybrid-Electric Vehicle Considerations In the event of damage or fire involving an electric vehicle (EV) or hybrid-electric vehicle (HEV): • Always assume the high-voltage


battery and associated components are energized and fully charged. Exposed electrical components, wires and high-voltage batteries present potential high-voltage shock hazards.



195


1. Remove the jumper cable from the


negative prong.


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E148862 Roadside Emergencies


Always • Call 911 if assistance is needed and


advise that an electric or hybrid-electric vehicle is involved.


• Do not touch exposed electrical


components or the engine compartment, as a shock hazard may exist.


• Avoid contact with leaking fluids and gases, and remain out of the way of oncoming traffic until emergency responders arrive.


• When emergency responders arrive,


tell them that the vehicle involved is an electric vehicle or hybrid vehicle.


Fires As with any vehicle, call 911 immediately if you see sparks, smoke or flames coming from the vehicle. • Exit the vehicle immediately. • Advise 911 that an electric or


hybrid-electric vehicle is involved.


• As with any vehicle fire, do not inhale smoke, vapors or gas from the vehicle, as they may be hazardous.



• Remain a safe distance from the vehicle and try to stay clear of the smoke. Stay out of the roadway and stay out of the way of any oncoming traffic while awaiting the arrival of emergency responders. Post-Incident • Do not store a severely damaged


vehicle with a lithium-ion battery inside a structure or within 50 feet (15
meters) of any structure or vehicle. • Make sure that passenger and cargo compartments remain ventilated (i.e. open window, door or trunk).


• Venting/off-gassing high-voltage


battery vapors are potentially toxic and flammable.


• Physical damage to the vehicle or high-voltage battery may result in immediate or delayed release of toxic, flammable gases and fire.


Vehicle Information and General Safety Practices •


Know the make and model of your vehicle.


• Review the owner’s manual and


become familiar with your vehicle’s safety information and recommended safety practices.


• Do not attempt to repair damaged electric and hybrid-electric vehicles yourself. Contact an authorized Ford Dealer or vehicle manufacturer representative for service.


Crashes A crash or impact significant enough to require an emergency response for conventional vehicles would also require the same response for an electric or hybrid-electric vehicle. If possible • Move your car to a safe, nearby


location and remain on the scene.


• Roll down the windows before shutting


your vehicle off.


• Place your vehicle in Park, set the parking brake, turn off the vehicle, activate the hazard lights, and move your key(s) at least 16 feet (5 meters) away from the vehicle.


196


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Roadside Emergencies




For vehicles in the United States, notify Ford Motor Company 1-800-392-3673
(then follow the prompts on the voice response menu), an authorized Ford dealer or service center as soon as possible as there may be other steps to secure and discharge the high-voltage battery. For vehicles in Canada, notify Ford Motor Company 1-800-565-3673
(then follow the prompts on the voice response menu), an authorized Ford dealer or service center as soon as possible as there may be other steps to secure and discharge the high-voltage battery.


• Call 911 if you observe leaking fluids,


sparks, smoke or flames, or hear gurgling or bubbling from the high-voltage battery.


POST-CRASH ALERT SYSTEM The system flashes the direction indicators and sounds the horn (intermittently) in the event of a serious impact that deploys an airbag (front, side, side curtain or Safety Canopy) or the safety belt pretensioners. The horn and indicators will turn off when: • •


You press the hazard control button. You press the panic button on the remote entry transmitter (if equipped). Your vehicle runs out of power.



197


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Customer Assistance


These are some of the items that can be found online: • U.S. dealer locator by Dealer Name,


City/State or Zip Code.


Ford Extended Service Plans. Ford Genuine Accessories. Service specials and promotions.


• Owner Manuals. • Maintenance Schedules. • Recalls. • • • In Canada: Mailing address Customer Relationship Centre Ford Motor Company of Canada, Limited P.O. Box 2000
Oakville, Ontario L6K 0C8
Telephone 1-800-565-3673 (FORD) Online www.ford.ca Twitter @FordServiceCA (English Canada) @FordServiceQC (Quebec) Additional Assistance If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1. Contact your Sales Representative or Service Advisor at your selling/servicing authorized dealer. If your inquiry or concern remains unresolved, contact the Sales Manager, Service Manager or Customer Relations Manager. If you require assistance or clarification on Ford Motor Company policies, please contact the Ford Customer Relationship Center.


3.


2.


GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorized dealer. While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction. Please note that certain warranty repairs require special training and equipment, so not all authorized dealers are authorized to perform all warranty repairs. This means that, depending on the warranty repair needed, you may have to take your vehicle to another authorized dealer. A reasonable time must be allowed to perform a repair after taking your vehicle to the authorized dealer. Repairs will be made using Ford or Motorcraft® parts, or remanufactured or other parts that are authorized by Ford. Away From Home If you are away from home when your vehicle needs service, contact the Ford Customer Relationship Center or use the online resources listed below to find the nearest authorized dealer. In the United States: Mailing address Ford Motor Company Customer Relationship Center P.O. Box 6248
Dearborn, MI 48121
Telephone 1-800-392-3673 (FORD) (TDD for the hearing impaired: 1-800-232-5952) Online Additional information and resources are available online at www.fordowner.com


198


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Customer Assistance


California Civil Code Section 1793.22(b) presumes that the manufacturer has had a reasonable number of attempts to conform the vehicle to its applicable express warranties if, within the first 18
months of ownership of a new vehicle or the first 18000 miles (29 000 km), whichever occurs first: 1. Two or more repair attempts are made on the same non-conformity likely to cause death or serious bodily injury OR 2. Four or more repair attempts are made on the same nonconformity (a defect or condition that substantially impairs the use, value or safety of the vehicle) OR


3. The vehicle is out of service for repair of nonconformities for a total of more than 30 calendar days (not necessarily all at one time).


In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address: Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126
You are required to submit your warranty dispute to BBB AUTO LINE before asserting in court any rights or remedies conferred by California Civil Code Section 1793.22(b). You are also required to use BBB AUTO LINE before exercising rights or seeking remedies created by the Federal Magnuson-Moss Warranty Act, 15 U.S.C. sec. 2301 et seq. If you choose to seek redress by pursuing rights and remedies not created by California Civil Code Section 1793.22(b) or the Magnuson-Moss Warranty Act, resort to BBB AUTO LINE is not required by those statutes.



In order to help us serve you better, please have the following information available when contacting a Customer Relationship Center: • Vehicle Identification Number. •


Your telephone number (home and business). The name of the authorized dealer and city where located. The vehicle’s current odometer reading.


• In some states, you must directly notify Ford in writing before pursuing remedies under your state’s warranty laws. Ford is also allowed a final repair attempt in some states. In the United States, a warranty dispute must be submitted to the BBB AUTO LINE before taking action under the Magnuson-Moss Warranty Act, or to the extent allowed by state law, before pursuing replacement or repurchase remedies provided by certain state laws. This dispute handling procedure is not required prior to enforcing state created rights or other rights which are independent of the Magnuson-Moss Warranty Act or state replacement or repurchase laws. IN CALIFORNIA (U.S. ONLY) California Civil Code Section 1793.2(d) requires that, if a manufacturer or its representative is unable to repair a motor vehicle to conform to the vehicle’s applicable express warranty after a reasonable number of attempts, the manufacturer shall be required to either replace the vehicle with one substantially identical or repurchase the vehicle and reimburse the buyer in an amount equal to the actual price paid or payable by the consumer (less a reasonable allowance for consumer use). The consumer has the right to choose whether to receive a refund or replacement vehicle.


199


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Customer Assistance


THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY) Your satisfaction is important to Ford Motor Company and to your dealer. If a warranty concern has not been resolved using the three-step procedure outlined earlier in this chapter in the Getting the Services you need section, you may be eligible to participate in the BBB AUTO LINE program. The BBB AUTO LINE program consists of two parts – mediation and arbitration. During mediation, a representative of the BBB will contact both you and Ford Motor Company to explore options for settlement of the claim. If an agreement is not reached during mediation or you do not want to participate in mediation, and if your claim is eligible, you may participate in the arbitration process. An arbitration hearing will be scheduled so that you can present your case in an informal setting before an impartial person. The arbitrator will consider the testimony provided and make a decision after the hearing. Disputes submitted to the BBB AUTO LINE program are usually decided within forty days after you file your claim with the BBB. You are not bound by the decision, and may reject the decision and proceed to court where all findings of the BBB Auto Line dispute, and decision, are admissible in the court action. Should you choose to accept the BBB AUTO LINE decision, Ford is then bound by the decision, and must comply with the decision within 30 days of receipt of your acceptance letter. BBB AUTO LINE Application: Using the information provided below, please call or write to request a program application. You will be asked for your name and address, general information about your new vehicle, information about your warranty concerns, and any steps you have


already taken to try to resolve them. A Customer Claim Form will be mailed that will need to be completed, signed and returned to the BBB along with proof of ownership. Upon receipt, the BBB will review the claim for eligibility under the Program Summary Guidelines. You can get more information by calling BBB AUTO LINE at 1-800-955-5100, or writing to: BBB AUTO LINE 3033 Wilson Boulevard, Suite 600
Arlington, Virginia 22201
BBB AUTO LINE applications can also be requested by calling the Ford Motor Company Customer Relationship Center at 1-800-392-3673. Note: Ford Motor Company reserves the right to change eligibility limitations, modify procedures, or to discontinue this process at any time without notice and without obligation. UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those cases where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation/arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP). The CAMVAP program is a straight forward and relatively speedy alternative to resolve a disagreement when all other efforts to produce a settlement have failed. This procedure is without cost to you and is designed to eliminate the need for lengthy and expensive legal proceedings.


200


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Customer Assistance


In the CAMVAP program, impartial third-party arbitrators conduct hearings at mutually convenient times and places in an informal environment. These impartial arbitrators review the positions of the parties, make decisions and, when appropriate, render awards to resolve disputes. CAMVAP decisions are fast, fair, and final as the arbitrator’s award is binding on both you and Ford of Canada. CAMVAP services are available in all Canadian territories and provinces. For more information, without charge or obligation, call your CAMVAP Provincial Administrator directly at 1-800-207-0685
or visit www.camvap.ca. GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADA Before exporting your vehicle to a foreign country, contact the appropriate foreign embassy or consulate. These officials can inform you of local vehicle registration regulations and where to find unleaded fuel. If you cannot find unleaded fuel or can only get fuel with an anti-knock index lower than is recommended for your vehicle, contact our Customer Relationship Center. The use of leaded fuel in your vehicle without proper conversion may damage the effectiveness of your emission control system and may cause engine knocking or serious engine damage. Ford Motor Company or Ford of Canada is not responsible for any damage caused by use of improper fuel. Using leaded fuel may also result in difficulty importing your vehicle back into the United States.


If your vehicle must be serviced while you are traveling or living in Asia-Pacific Region, Sub-Saharan Africa, U.S. Virgin Islands, Central America, the Caribbean, and Israel, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: FORD MOTOR COMPANY Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3
Allen Park, Michigan 48101
U.S.A. Telephone: (313) 594-4857
Fax: (313) 390-0804
Email: [email protected] For customers in Guam, the Commonwealth of the Northern Mariana Islands (CNMI), America Samoa, and the U.S. Virgin Islands, please feel free to call our Toll-Free Number: (800) 841-FORD (3673). If your vehicle must be serviced while you are traveling or living in Puerto Rico, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: FORD MOTOR COMPANY Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3
Allen Park, Michigan 48101
U.S.A. Telephone: (800) 841-FORD (3673) FAX: (313) 390-0804
Email: [email protected] www.ford.com.pr If your vehicle must be serviced while you are traveling or living in the Middle East, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact:


201


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Customer Assistance


Or to order a free publication catalog, call toll free: 1-800-782-4356
Monday-Friday 8:00 a.m. - 6:00 p.m. EST Helm, Incorporated can also be reached by their website: www.helminc.com (Items in this catalog may be purchased by credit card, check or money order.) Obtaining a French Owner’s Manual French Owner’s Manual can be obtained from your authorized dealer or by contacting Helm, Incorporated using the contact information listed previously in this section. REPORTING SAFETY DEFECTS (U.S. ONLY)


If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Ford Motor Company.


FORD MOTOR COMPANY Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3
Allen Park, Michigan 48101
U.S.A. Ford: 80004443673
Lincoln: 80004441067
If calling from the UAE: 80004441066
If calling from the Kingdom of Saudi Arabia: 8008443673
If calling from Kuwait: 22280384
FAX: +971 4 3327266
Email: [email protected] www.me.ford.com If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Motor Company Export Operations & Global Growth Initiatives by emailing [email protected]. If you are in another foreign country, contact the nearest authorized dealer. In the event your inquiry is unresolved, communicate your concern with the dealership’s Sales Manager, Service Manager or Customer Relations Manager. If you require additional assistance or clarification, please contact the respective Customer Relationship Center as previously listed. Customers in the U.S. should call 1-800-392-3673. ORDERING ADDITIONAL OWNER'S LITERATURE To order the publications in this portfolio, contact Helm, Incorporated at: HELM, INCORPORATED 47911 Halyard Drive Plymouth, Michigan 48170
Attention: Customer Service


202


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E142557 Customer Assistance


If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator


1200 New Jersey Avenue, Southeast Washington, D.C. 20590
You can also obtain other information about motor vehicle safety from http://www.safercar.gov. REPORTING SAFETY DEFECTS (CANADA ONLY) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform Transport Canada.


Transport Canada Contact Information


Website Phone


http://www.tc.gc.ca/eng/roadsafety/menu.htm 1–800–333–0510


203


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Fuses


WARNINGS


To reduce risk of electrical shock, always replace the cover to the power distribution box before


reconnecting the battery or refilling fluid reservoirs.


The power distribution box is located in the engine compartment. It has high-current fuses that protect your vehicle's main electrical systems from overloads. If you disconnect and reconnect the battery, you will need to reset some features. See Changing the 12V Battery (page 223). Lift the release lever at the rear of the cover to remove it.


FUSE SPECIFICATION CHART Pre-Fuse Box Your vehicle has a pre-fuse box attached to the power distribution box. There is a second pre-fuse box attached to the 12-volt battery terminal in the rear of your vehicle. They contain high-current fuses. If you need to replace one of these fuses, see an authorized dealer. Power Distribution Box WARNINGS


Always disconnect the battery before servicing high current fuses.


204


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


E162196 Fuses


Fuse or relay number


Fuse amp rating


Protected components


F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
F14
F15
F16
F17
F18
F19


F20
F21
F22
F23


F24


50A Midi 50A Midi 50A Midi 50A Midi


— —


40A** 30A** 40A** 40A** 30A**



25A** 20A** 30A** 20A** 20A** 20A** 5A*


15A* 5A* 5A* 5A*


5A*


Cooling fan module. Electric water pump. Body control module supply 1. Body control module supply 2. Not used. Not used. Anti-lock brake system pump. Anti-lock brake system valve. Vacuum pump. Heater blower motor. Engine management. Not used. Powertrain control module relay. Rear wiper. Body control module KL30 supply. Body control module 15 feed. Transmission oil pump (C-MAX Energi). Front wiper motor. Anti-lock brake system and electronic stability program module. Horn. Stop light switch. Vacuum pump monitoring. Engine control module 15. Powertrain control module 15. Transmission oil pump 15. Relay coils. Light switch module.


205


C-MAX (CCG) Canada/United States of America, enUSA, Second Printing


Fuses


Fuse or relay number


Fuse amp rating


F25
F26


F27
F28
F29


F30


F31
F32
F33
F34
F35
F36
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12


10A* 5A*


5A* 15A* 10A*


10A*


5A* 20A* 15A* 10A* 10A* 20A*



Micro relay Micro relay Micro relay



Micro relay Power relay

Loading...
x