Login- Download PDF Manual
-
Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (29,1)
{ Warning
Never hold an infant or a child while riding in a vehicle. Due to crash forces, an infant or a child will become so heavy it is not possible to hold it during a crash. For example, in a crash at only 40 km/h (25 mph), a 5.5 kg (12 lb) infant will suddenly become a 110 kg (240 lb) force on a person's arms. An infant should be secured in an appropriate restraint.
Seats and Restraints
3-29
Warning (Continued)
seat, always move the front passenger seat as far back as it will go.
{ Warning
Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the right front seat. Secure a rear-facing child restraint in a rear seat. It is also better to secure a forward-facing child restraint in a rear seat. If you must secure a forward-facing child restraint in the right front
(Continued)
Q: What are the different types of
add-on child restraints?
A: Add-on child restraints, which are purchased by the vehicle owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child's
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (30,1)
Warning (Continued)
any bony structure. This alone could cause serious or fatal injuries. To reduce the risk of serious or fatal injuries during a crash, young children should always be secured in appropriate child restraints.
3-30
Seats and Restraints
weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used. For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufacturer instructions that come with the restraint state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs.
{ Warning
To reduce the risk of neck and head injury during a crash, infants need complete support. In a crash, if an infant is in a rear-facing child restraint, the crash forces can be distributed across the strongest part of an infant's body, the back and shoulders. Infants should always be secured in rear-facing child restraints.
{ Warning
A young child's hip bones are still so small that the vehicle's regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child's abdomen. In a crash, the belt would apply force on a body area that is unprotected by
(Continued)
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (31,1)
Child Restraint Systems
Seats and Restraints
3-31
Forward-Facing Child Seat
Booster Seats
A forward-facing child seat provides restraint for the child's body with the harness.
A booster seat is a child restraint designed to improve the fit of the vehicle's safety belt system. A booster seat can also help a child to see out the window.
Rear-Facing Infant Seat
A rear-facing infant seat provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (32,1)
3-32
Seats and Restraints
Securing an Add-On Child Restraint in the Vehicle { Warning
A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle safety belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual.
To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraint systems must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system. See Lower Anchors and Tethers for Children (LATCH System) on page 3-34.
Children can be endangered in a crash if the child restraint is not properly secured in the vehicle. When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it. In some areas of the United States and Canada, Certified Child Passenger Safety Technicians (CPSTs) are available to inspect and demonstrate how to correctly use and install child restraints. In the U.S., refer to the National Highway Traffic Safety
Administration (NHTSA) website to locate the nearest child safety seat inspection station. For CPST availability in Canada, check with Transport Canada or the Provincial Ministry of Transportation office. Securing the Child Within the Child Restraint
{ Warning
A child can be seriously injured or killed in a crash if the child is not properly secured in the child restraint. Secure the child properly following the instructions that came with that child restraint.
Where to Put the Restraint According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (33,1)
Whenever possible, children aged 12 and under should be secured in a rear seating position. Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great if the airbag deploys.
{ Warning
A child in a rear-facing child restraint can be seriously injured or killed if the front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the front passenger airbag inflates and the passenger seat is in a forward position. Even if the passenger sensing system has turned off the front passenger frontal airbag, no
(Continued)
Warning (Continued)
system is fail-safe. No one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off. Secure rear-facing child restraints in a rear seat, even if the airbag is off. If you secure a forward-facing child restraint in the front seat, always move the front passenger seat as far back as it will go. It is better to secure the child restraint in a rear seat. See Passenger Sensing System on page 3-20 for additional information.
When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle.
Seats and Restraints
3-33
Child restraints and booster seats vary considerably in size, and some may fit in certain seating positions better than others. Always make sure the child restraint is properly secured. Depending on where you place the child restraint and the size of the child restraint, you may not be able to access adjacent safety belt assemblies or LATCH anchors for additional passengers or child restraints. Adjacent seating positions should not be used if the child restraint prevents access to or interferes with the routing of the safety belt. Wherever a child restraint is installed, be sure to secure the child restraint properly. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (34,1)
3-34
Seats and Restraints
Lower Anchors and Tethers for Children (LATCH System) The LATCH system secures a child restraint during driving or in a crash. LATCH attachments on the child restraint are used to attach the child restraint to the anchors in the vehicle. The LATCH system is designed to make installation of a child restraint easier. In order to use the LATCH system in your vehicle, you need a child restraint that has LATCH attachments. LATCH-compatible rear-facing and forward-facing child seats can be properly installed using either the LATCH anchors or the vehicle’s safety belts. Do not use both the safety belts and the LATCH anchorage system to secure a rear-facing or forward-facing child seat. Booster seats use the vehicle’s safety belts to secure the child in the booster seat. If the manufacturer
recommends that the booster seat be secured with the LATCH system, this can be done as long as the booster seat can be positioned properly and there is no interference with the proper positioning of the lap-shoulder belt on the child. Make sure to follow the instructions that came with the child restraint, and also the instructions in this manual. When installing a child restraint with a top tether, you must also use either the lower anchors or the safety belts to properly secure the child restraint. A child restraint must never be installed using only the top tether and anchor. The LATCH anchorage system can be used until the combined weight of the child plus the child restraint is 29.5 kg (65 lbs). Use the safety belt alone instead of the LATCH anchorage system once the combined weight is more than 29.5 kg (65 lbs).
The following explains how to attach a child restraint with these attachments in the vehicle. Not all vehicle seating positions or child restraints have lower anchors and attachments or top tether anchors and attachments. Lower Anchors
Lower anchors (1) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (2).
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (35,1)
Top Tether Anchor
The child restraint may have a single tether (3) or a dual tether (4). Either will have a single attachment (2) to secure the top tether to the anchor. Some child restraints with top tethers are designed for use with or without the top tether being attached. Others require the top tether always to be attached. Be sure to read and follow the instructions for your child restraint.
A top tether (3, 4) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (2) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash.
Seats and Restraints
3-35
Lower Anchor and Top Tether Anchor Locations
Rear Seat
I (Top Tether Anchor): Seating positions with top tether anchors. H (Lower Anchor): Seating positions with two lower anchors.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (36,1)
3-36
Seats and Restraints
To assist in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion.
1. Outboard Lower Anchors 2. Center Lower Anchors The outboard lower anchors (1) are behind the vertical openings in the seat trim. The center lower anchors (2) are in the crease between the seatback and the seat cushion.
To assist in locating the top tether anchors, the top tether anchor symbol is near the anchor.
Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached. According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. See Where to Put the Restraint on page 3-32 for additional information. Securing a Child Restraint Designed for the LATCH System
{ Warning
The top tether anchors are on the rear seatback filler panel. Be sure to use an anchor on the same side of the vehicle as the seating position where the child restraint will be placed.
If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly. In a crash, the (Continued)
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (37,1)
Warning (Continued)
child could be seriously injured or killed. Install a LATCH-type child restraint properly using the anchors, or use the vehicle safety belts to secure the restraint, following the instructions that came with the child restraint and the instructions in this manual.
{ Warning
Do not attach more than one child restraint to a single anchor. Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a crash. A child or others could be injured. To reduce the risk of serious or fatal injuries during a crash, attach only one child restraint per anchor.
{ Warning
Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Buckle any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, if the vehicle has one, after the child restraint has been installed.
{ Caution
Do not let the LATCH attachments rub against the vehicle’s safety belts. This may damage these parts. If necessary, move buckled safety belts to avoid rubbing the LATCH attachments.
Seats and Restraints
3-37
If you need to secure more than one child restraint in the rear seat, see Where to Put the Restraint on page 3-32. This system is designed to make the installation of child restraints easier. When using lower anchors, do not use the vehicle's safety belts. Instead, use the vehicle's anchors and child restraint attachments to secure the restraints. Some restraints also use another vehicle anchor to secure a top tether. 1. Attach and tighten the lower
attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (38,1)
3-38
Seats and Restraints
1.1. Find the lower anchors for
the desired seating position.
1.2. Put the child restraint on
the seat.
1.3. Attach and tighten the lower
attachments on the child restraint to the lower anchors.
If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor.
2.
2.2. Route, attach, and tighten the top tether according to your child restraint instructions and the following instructions:
If the position you are using does not have a head restraint and you are using a single tether, route the tether over the seatback.
If the position you are using does not have a head restraint and you are using a dual tether, route the tether over the seatback.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (39,1)
If the position you are using has a fixed head restraint and you are using a single tether, route the tether over the head restraint.
If the position you are using has a fixed head restraint and you are using a dual tether, route the tether around the head restraint.
3. Before placing a child in the
child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back
and forth. There should be no more than 2.5 cm (1 in) of movement for proper installation.
Replacing LATCH System Parts After a Crash { Warning
A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer to have the system inspected and any necessary replacements made as soon as possible.
If the vehicle has the LATCH system and it was being used during a crash, new LATCH system parts may be needed.
Seats and Restraints
3-39
New parts and repairs may be necessary even if the LATCH system was not being used at the time of the crash.
Securing Child Restraints (Rear Seat) When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH System) on page 3-34 for how and where to install the child restraint using LATCH. If a child restraint is secured in the vehicle using a safety belt and it uses a top tether, see Lower Anchors and Tethers for Children (LATCH System) on page 3-34 for top tether anchor locations. Do not secure a child seat in a position without a top tether anchor if a national or local law requires
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (40,1)
3-40
Seats and Restraints
that the top tether be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. If the child restraint does not have the LATCH system, you will be using the safety belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. If more than one child restraint needs to be installed in the rear seat, be sure to read Where to Put the Restraint on page 3-32. 1. Put the child restraint on
the seat.
2. Pick up the latch plate, and run the lap and shoulder portions of the vehicle safety belt through or
around the restraint. The child restraint instructions will show you how.
4. Pull the shoulder belt all the way
out of the retractor to set the lock. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor.
3. Push the latch plate into the
buckle until it clicks. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (41,1)
Seats and Restraints
3-41
6.
If the child restraint has a top tether, follow the child restraint manufacturer's instructions regarding the use of the top tether. See Lower Anchors and Tethers for Children (LATCH System) on page 3-34 for more information.
7. Before placing a child in the
child restraint, make sure it is securely held in place. To check, grasp the child restraint at the safety belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement. To remove the child restraint, unbuckle the vehicle safety belt and let it return to the stowed position. If the top tether is attached to a top tether anchor, disconnect it.
Securing Child Restraints (Front Passenger Seat) This vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put the Restraint on page 3-32. In addition, the vehicle has a passenger sensing system which is designed to turn off the front outboard passenger frontal airbag and knee airbag under certain conditions. See Passenger Sensing System on page 3-20 and Passenger Airbag Status Indicator on page 5-11 for more information, including important safety information. Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great, if the airbag deploys.
5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 4 and 5.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (42,1)
3-42
Seats and Restraints
{ Warning
A child in a rear-facing child restraint can be seriously injured or killed if the passenger frontal airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the passenger frontal airbag inflates and the passenger seat is in a forward position. Even if the passenger sensing system has turned off the front outboard passenger airbag(s), no system is fail-safe. No one can guarantee that an airbag will not inflate under some unusual circumstance, even though the airbag(s) are off.
(Continued)
Warning (Continued)
Secure rear-facing child restraints in a rear seat, even if the airbag(s) are off. If you secure a forward-facing child restraint in the front outboard passenger seat, always move the seat as far back as it will go. It is better to secure the child restraint in a rear seat.
If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH System) on page 3-34 for how and where to install the child restraint using LATCH. If a child restraint is secured using a safety belt and it uses a top tether, see for top tether anchor locations. Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if
the instructions that come with the child restraint say that the top strap must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. You will be using the lap-shoulder belt to secure the child restraint in this position. Follow the instructions that came with the child restraint. 1. Move the seat as far back as it
will go before securing the forward-facing child restraint. When the passenger sensing system has turned off the front outboard passenger frontal and knee airbags, the off indicator on the passenger airbag status indicator should light and stay lit when the vehicle is started. See Passenger Airbag Status Indicator on page 5-11.
2. Put the child restraint on
the seat.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (43,1)
Seats and Restraints
3-43
3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how.
4. Push the latch plate into the
buckle until it clicks. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.
5. Pull the shoulder belt all the way
out of the retractor to set the lock. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor.
6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 5 and 6.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (44,1)
3-44
Seats and Restraints
7. Before placing a child in the
child restraint, make sure it is securely held in place. To check, grasp the child restraint at the safety belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement.
If the airbags are off, the off indicator in the passenger airbag status indicator will come on and stay on when the vehicle is started. If a child restraint has been installed and the on indicator is lit, see “If the On Indicator Is Lit for a Child Restraint” under Passenger Sensing System on page 3-20 for more information. To remove the child restraint, unbuckle the vehicle safety belt and let it return to the stowed position.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (1,1)
Storage
Storage Compartments
Storage Compartments . . . . . . . 4-1
Glove Box . . . . . . . . . . . . . . . . . . . . 4-1
Cupholders . . . . . . . . . . . . . . . . . . . 4-1
Center Console Storage . . . . . . 4-2Additional Storage Features
Convenience Net . . . . . . . . . . . . . 4-3
Storage Compartments { Warning
Do not store heavy or sharp objects in storage compartments. In a crash, these objects may cause the cover to open and could result in injury.
Glove Box Lift up on the glove box lever to open it.
Storage
4-1
Cupholders
The front cupholders are in the center console.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (2,1)
4-2
Storage
Center Console Storage
Pull the rear armrest down to access the rear cupholders.
The vehicle has cupholders in front of the center seat. To open, push in the front of the cover and release it. To close, slide the cupholder back into the seat until the latch engages.
There is storage under the center console armrest. To open, press the latch and lift up. Do not force the lid backwards. There is a power outlet inside. See Power Outlets on page 5-4.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (3,1)
Storage
4-3
Additional Storage Features
Convenience Net
If equipped, the convenience net is in the rear. Put small loads behind the net. It can also be positioned into an envelope style to hold smaller items. The net is not for heavier loads. Store items as far forward as you can.
For larger objects, place a corner loop (1) on each hook.
Attach four corner loops (1) to the top two hooks on the vehicle (two loops on one side, two loops on the other) and attach the two center loops (2) to the bottom hooks on the vehicle. The net can be opened and objects placed inside.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (4,1)
4-4
Storage
2 NOTES
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (1,1)
Instruments and Controls
5-1
Instruments and Controls
Controls
Steering Wheel Adjustment . . . 5-2
Steering Wheel Controls . . . . . . 5-2
Horn . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Windshield Wiper/Washer . . . . . 5-3
Clock . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Power Outlets . . . . . . . . . . . . . . . . . 5-4Warning Lights, Gauges, and Indicators
Warning Lights, Gauges, and
Indicators . . . . . . . . . . . . . . . . . . . . 5-6
Instrument Cluster . . . . . . . . . . . . 5-7
Speedometer . . . . . . . . . . . . . . . . . 5-8
Odometer . . . . . . . . . . . . . . . . . . . . . 5-8
Trip Odometer . . . . . . . . . . . . . . . . . 5-8
Tachometer . . . . . . . . . . . . . . . . . . . 5-8
Fuel Gauge . . . . . . . . . . . . . . . . . . . 5-8
Engine Coolant TemperatureGauge . . . . . . . . . . . . . . . . . . . . . . . 5-9
Safety Belt Reminders . . . . . . . . 5-9
Airbag Readiness Light . . . . . . 5-10
Passenger Airbag StatusIndicator . . . . . . . . . . . . . . . . . . . . 5-11
Charging System Light . . . . . . . 5-11
MalfunctionIndicator Lamp . . . . . . . . . . . . . 5-12
Service Vehicle Soon
Light . . . . . . . . . . . . . . . . . . . . . . . 5-14
Brake System Warning
Light . . . . . . . . . . . . . . . . . . . . . . . 5-14
Electric Parking Brake
Light . . . . . . . . . . . . . . . . . . . . . . . 5-15
Service Electric Parking Brake
Light . . . . . . . . . . . . . . . . . . . . . . . 5-15
Antilock Brake System (ABS)
Warning Light . . . . . . . . . . . . . . 5-16
Lane Departure Warning
(LDW) Light . . . . . . . . . . . . . . . . 5-16
Forward Collision Alert (FCA)
Warning Light . . . . . . . . . . . . . . 5-16
Vehicle Ahead Indicator . . . . . . 5-17
Traction Off Light . . . . . . . . . . . . 5-17
StabiliTrak® OFF Light . . . . . . . 5-17
Traction Control System(TCS)/StabiliTrak® Light . . . . 5-18
Tire Pressure Light . . . . . . . . . . 5-18
Engine Oil Pressure Light . . . . 5-18
Low Fuel Warning Light . . . . . . 5-19
Security Light . . . . . . . . . . . . . . . . 5-19
High-Beam On Light . . . . . . . . . 5-20
Front Fog Lamp Light . . . . . . . . 5-20Lamps On Reminder . . . . . . . . . 5-20
Cruise Control Light . . . . . . . . . 5-20
Door Ajar Light . . . . . . . . . . . . . . 5-20Information Displays
Driver Information
Center (DIC) . . . . . . . . . . . . . . . 5-21
Head-Up Display (HUD) . . . . . 5-23Vehicle Messages
Vehicle Messages . . . . . . . . . . . 5-26
Battery Voltage and ChargingMessages . . . . . . . . . . . . . . . . . . 5-26
Brake System Messages . . . . 5-26
Cruise Control Messages . . . . 5-27
Door Ajar Messages . . . . . . . . . 5-27
Engine Cooling SystemMessages . . . . . . . . . . . . . . . . . . 5-27
Engine Oil Messages . . . . . . . . 5-28
Engine Power Messages . . . . 5-28
Fuel System Messages . . . . . . 5-28
Key and Lock Messages . . . . . 5-29
Lamp Messages . . . . . . . . . . . . . 5-29
Object Detection SystemMessages . . . . . . . . . . . . . . . . . . 5-29
Ride Control System
Messages . . . . . . . . . . . . . . . . . . 5-31
Security Messages . . . . . . . . . . 5-31
Service Vehicle Messages . . . 5-31Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (2,1)
5-2
Instruments and Controls
Tire Messages . . . . . . . . . . . . . . . 5-31
Transmission Messages . . . . . 5-32
Vehicle ReminderMessages . . . . . . . . . . . . . . . . . . 5-32
Washer Fluid Messages . . . . . 5-32
Window Messages . . . . . . . . . . . 5-32Vehicle Personalization
Vehicle Personalization . . . . . . 5-33
Controls
Steering Wheel Adjustment
Do not adjust the tilt and telescope lever while driving.
Steering Wheel Controls
To adjust the steering wheel: 1. Pull the lever down. 2. Move the steering wheel up or
down and in or out for a comfortable position.
3. Pull the lever up to lock the
steering wheel in place.
Some audio functions can be controlled through the steering wheel controls. b / g (Push to Talk): Press to interact with Bluetooth or voice recognition. See Bluetooth on page 7-75, OnStar Overview on page 14-1, or Voice Recognition on page 7-68.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (3,1)
Instruments and Controls
5-3
$ / i (Mute/End Call): Press to decline an incoming call, or to end a current call. Press to silence the vehicle speakers while using the infotainment system. Press again to turn the sound on. Press to cancel voice recognition. _ SRC ^ (Thumbwheel Control): Press to select an audio source. Use the thumbwheel to select the next or previous favorite radio station, CD track, MP3 track, USB track, and Bluetooth Audio track. Use _ SRC to skip to the next song or show using Pandora or Stitcher. See Pandora Internet Radio on page 7-22 or Stitcher Internet Radio on page 7-27. + x − (Volume): Press + to increase the volume. Press − to decrease.
Horn Press a on the steering wheel pad to sound the horn.
Windshield Wiper/Washer
With the ignition in ACC/ ACCESSORY or ON/RUN/START, move the windshield wiper lever to select the wiper speed. HI: Use for fast wipes. LO: Use for slow wipes.
INT (Rainsense Wipe Sensitivity Control): Move the windshield wiper lever to INT. Turn the x INT band on the wiper lever to adjust the sensitivity. OFF: Use to turn the wipers off. 8 (Mist): For a single wipe, briefly move the wiper lever down. For several wipes, hold the wiper lever down. Clear snow and ice from the wiper blades and windshield before using them. If frozen to the windshield, carefully loosen or thaw them. Damaged blades should be replaced. See Wiper Blade Replacement on page 10-23. Heavy snow or ice can overload the wiper motor. Rainsense™ With Rainsense, a sensor near the top center of the windshield detects the amount of water on the windshield and controls the frequency of the windshield wiper.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (4,1)
5-4
Instruments and Controls
Keep this area of the windshield clear of debris to allow for best system performance. INT (Rainsense Wipe Sensitivity Control): Move the windshield wiper lever to INT. Turn the x INT band on the wiper lever to adjust the sensitivity.
Turn the band up for more sensitivity to moisture. Turn the band down for less sensitivity to moisture.
. Move the windshield wiper lever
out of the INT position to deactivate Rainsense.
n L (Windshield Washer): Pull the windshield wiper lever toward you to spray windshield washer fluid and activate the wipers. The wipers
will continue until the lever is released or the maximum wash time is reached. When the windshield wiper lever is released, additional wipes may occur depending on how long the windshield washer had been activated. See Washer Fluid on page 10-17 for information on filling the windshield washer fluid reservoir.
{ Warning
In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision.
Clock
Time and Date 1. Press HOME on the radio
faceplate.
2. Press the Config screen button
on the Home Page.
3. Select Time and Date. 4. Select the desired setting to
change.
Set Time: Press + or − to increase or decrease the hours and minutes. If auto timing is set, the time displayed on the clock may not update immediately when driving into a new time zone. Set Date: Press + or − to increase or decrease the year, month, and day. 12hr/24hr Format: Press to select 12 hour or 24 hour time format. Press the Back screen button to save.
Power Outlets The accessory power outlets can be used to plug in electrical equipment, such as a cell phone or MP3 player. The vehicle has an accessory power outlet on the center stack and inside the center console storage.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (5,1)
Instruments and Controls
5-5
{ Caution
{ Caution
Hanging heavy equipment from the power outlet can cause damage not covered by the vehicle warranty. The power outlets are designed for accessory power plugs only, such as cell phone charge cords.
Adding any electrical equipment to the vehicle may damage it or keep other components from working as they should. The repairs would not be covered by the vehicle warranty. Do not use equipment exceeding maximum amperage rating of 10 amperes. Check with your dealer before adding electrical equipment.
When adding electrical equipment, be sure to follow the proper installation instructions included with the equipment. See Add-On Electrical Equipment on page 9-50.
To use the outlet, the ignition must be in ON/RUN or ACC/ ACCESSORY. Remove the cover to access the outlet and replace when not in use.
{ Caution
Leaving electrical equipment on for extended periods will drain the battery. Always turn off electrical equipment when not in use and do not plug in equipment that exceeds the maximum amperage rating.
This circuit is protected by a fuse and has a maximum current level. Do not use equipment exceeding the maximum amperage rating. Certain power accessory plugs may not be compatible with the accessory power outlet and could overload vehicle or adapter fuses. If a problem is experienced, see your dealer.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (6,1)
5-6
Instruments and Controls
When one of the warning lights comes on and stays on while driving, or when one of the gauges shows there may be a problem, check the section that explains what to do. Follow this manual's advice. Waiting to do repairs can be costly and even dangerous.
Warning Lights, Gauges, and Indicators Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges could prevent injury. Warning lights come on when there could be a problem with a vehicle function. Some warning lights come on briefly when the engine is started to indicate they are working. Gauges can indicate when there could be a problem with a vehicle function. Often gauges and warning lights work together to indicate a problem with the vehicle.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (7,1)
Instrument Cluster
Instruments and Controls
5-7
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (8,1)
5-8
Instruments and Controls
{ Caution
If the engine is operated with the tachometer in the shaded warning area, the vehicle could be damaged, and the damages would not be covered by the vehicle warranty. Do not operate the engine with the tachometer in the shaded warning area.
Fuel Gauge
Speedometer The speedometer shows the vehicle's speed in either kilometers per hour (km/h) or miles per hour (mph).
Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles.
Trip Odometer The trip odometer can show how far the vehicle has been driven since the trip odometer was last reset. The trip odometer is accessed and reset through the Driver Information Center (DIC). See Driver Information Center (DIC) on page 5-21.
Tachometer The tachometer displays the engine speed in revolutions per minute (rpm).
When the ignition is on, the fuel gauge shows how much fuel is left in the fuel tank. When the indicator nears empty, a message in the Driver Information Center (DIC) displays. See Fuel System Messages on page 5-28. The vehicle still has a little fuel left, but the vehicle should be fueled soon. An arrow on the fuel gauge indicates the side of the vehicle the fuel door is on. Here are four things that some owners ask about. These are normal and do not indicate a problem with the fuel gauge: . At the service station, the gas
pump shuts off before the gauge reads full. It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the fuel tank was half full, but it actually took a little more or less than half the fuel tank's capacity to fill it.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (9,1)
The indicator moves a little while turning a corner or speeding up. The gauge goes back to empty when the ignition is turned off.
Engine Coolant Temperature Gauge
Instruments and Controls
5-9
If the vehicle has been operated under normal driving conditions, pull off the road, stop the vehicle, and turn off the engine as soon as possible.
Safety Belt Reminders
Driver Safety Belt Reminder Light There is a driver safety belt reminder light on the instrument cluster.
driver remains or becomes unbuckled while the vehicle is moving. If the driver safety belt is buckled, neither the light nor chime comes on. Passenger Safety Belt Reminder Light
This gauge shows the engine coolant temperature. If the indicator needle moves to the hot side of the gauge, the engine is too hot.
When the vehicle is started this light flashes and a chime comes on to remind drivers to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the
When the vehicle is started this light flashes and a chime may come on to remind the front passenger to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the passenger remains or becomes unbuckled while the vehicle is moving. If the front passenger safety belt is buckled, neither the chime nor the light comes on.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (10,1)
5-10
Instruments and Controls
The front passenger safety belt warning light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the warning light and/or chime, remove the object from the seat or buckle the safety belt. Second Row Passenger Belt Reminder Light
Second row seating positions monitored for safety belt use are represented by a colored symbol in the Driver information Center (DIC) indicating safety belt status. When the vehicle is started, three safety belt symbols come on and stay on for several seconds in the instrument cluster to alert the driver
that passengers may need to fasten their safety belts. After the passenger safety belt is buckled, the corresponding safety belt symbol in the instrument cluster turns green. If a safety belt is not initially buckled, the instrument cluster displays a gray safety belt symbol. While the vehicle is moving, if a second row passenger that was previously buckled becomes unbuckled, the corresponding safety belt symbol will change to flashing red and a chime may sound.
Airbag Readiness Light This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System on page 3-14.
The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately.
{ Warning
If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (11,1)
Instruments and Controls
5-11
Passenger Airbag Status Indicator This vehicle has a passenger sensing system. See Passenger Sensing System on page 3-20 for important safety information. The rearview mirror has a passenger airbag status indicator.
When the vehicle is started, the passenger airbag status indicator will light ON and OFF for several seconds as a system check. Then, after several more seconds, the status indicator will light either ON or OFF to let you know the status of the front outboard passenger frontal airbag and knee airbag.
If the word ON is lit on the passenger airbag status indicator, it means that the front outboard passenger frontal airbag and knee airbag are allowed to inflate. If the word OFF is lit on the passenger airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag and knee airbag. If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service.
{ Warning
If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right
(Continued)
Warning (Continued)
away. See Airbag Readiness Light on page 5-10 for more information, including important safety information.
Charging System Light
The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working. The light turns off when the engine is started. If it does not, have the vehicle serviced by your dealer. If the light stays on, or comes on while driving, there could be a problem with the electrical charging
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (12,1)
5-12
Instruments and Controls
system. Have it checked by your dealer. Driving while this light is on could drain the battery. If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio and air conditioner.
Malfunction Indicator Lamp A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors the operation of the vehicle to ensure emissions are at acceptable levels, helping to maintain a clean environment. The malfunction indicator lamp comes on when the vehicle is placed in Service Only Mode, as a check to show it is working. If it does not, have the vehicle serviced by your dealer. See Ignition Positions on page 9-15.
Caution (Continued)
the vehicle fuel economy might not be as good, and the engine might not run as smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.
{ Caution
Modifications made to the engine, transmission, exhaust, intake, or fuel system of the vehicle or the replacement of the original tires with other than those of the same Tire Performance Criteria (TPC) can affect the vehicle's emission controls and can cause this light to come on. Modifications to these systems could lead to costly repairs not covered by the vehicle warranty. This could also result in a failure
If the malfunction indicator lamp comes on while the engine is running, this indicates that the OBD II system has detected a problem and diagnosis and service might be required. Malfunctions often are indicated by the system before any problem is apparent. Being aware of the light can prevent more serious damage to the vehicle. This system also assists the service technician in correctly diagnosing any malfunction.
{ Caution
If the vehicle is continually driven with this light on, the emission controls might not work as well,
(Continued)
(Continued)
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (13,1)
Instruments and Controls
5-13
Caution (Continued)
to pass a required Emission Inspection/Maintenance test. See Accessories and Modifications on page 10-2.
This light comes on during a malfunction in one of two ways: Light Flashing: A misfire condition has been detected. A misfire increases vehicle emissions and could damage the emission control system on the vehicle. Diagnosis and service might be required. To prevent more serious damage to the vehicle: . Reduce vehicle speed. . Avoid hard accelerations. . Avoid steep uphill grades. If the light continues to flash, find a safe place to stop and park the vehicle. Turn the vehicle off, wait at least 10 seconds, and restart the engine. If the light is still flashing,
follow the previous steps and see your dealer for service as soon as possible. Light On Steady: An emission control system malfunction has been detected on the vehicle. Diagnosis and service might be required. The following may correct an emission control system malfunction: . Check that the fuel cap is fully
installed. See Filling the Tank on page 9-48. The diagnostic system can determine if the fuel cap has been left off or improperly installed. A loose or missing fuel cap allows fuel to evaporate into the atmosphere. A few driving trips with the cap properly installed should turn the light off.
. Check that good quality fuel is used. Poor fuel quality causes the engine not to run as efficiently as designed and may cause stalling after start-up,
stalling when the vehicle is changed into gear, misfiring, hesitation on acceleration, or stumbling on acceleration. These conditions might go away once the engine is warmed up. If one or more of these conditions occurs, change the fuel brand used. It may require at least one full tank of the proper fuel to turn the light off. See Recommended Fuel on page 9-46. If none of the above have made the light turn off, your dealer can check the vehicle. The dealer has the proper test equipment and diagnostic tools to fix any mechanical or electrical problems that might have developed. Emissions Inspection and Maintenance Programs Depending on where you live, your vehicle may be required to participate in an emission control system inspection and maintenance program. For the inspection, the
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (14,1)
5-14
Instruments and Controls
The OBD II (On-Board Diagnostics) system determines that critical emission control systems have not been completely diagnosed. The vehicle would be considered not ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down. The diagnostic system is designed to evaluate critical emission control systems during normal driving. This can take several days of routine driving. If this has been done and the vehicle still does not pass the inspection for lack of OBD II system readiness, your dealer can prepare the vehicle for inspection.
emission system test equipment will likely connect to the vehicle's Data Link Connector (DLC).
The DLC is under the instrument panel to the left of the steering wheel. See your dealer if assistance is needed. The vehicle may not pass inspection if:
The malfunction indicator lamp is on with the engine running, or if the vehicle is placed in Service Only Mode and the malfunction indicator lamp does not come on. See your dealer for assistance in verifying proper operation of the malfunction indicator lamp.
Service Vehicle Soon Light
For vehicles with this light, it comes on if a condition exists that may require the vehicle to be taken in for service. If the light comes on, take the vehicle to your dealer for service as soon as possible.
Brake System Warning Light The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (15,1)
If the warning light comes on, there is a brake problem. Have the brake system inspected right away.
This light comes on briefly when the vehicle is turned on. If it does not come on then, have it fixed so it will be ready to warn if there is a problem. If the light comes on and stays on, there is a base brake problem.
{ Warning
The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after
(Continued)
Instruments and Controls
5-15
Warning (Continued)
the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.
Electric Parking Brake Light
Center (DIC). See Brake System Messages on page 5-26 for more information. If the light does not come on, or remains flashing, see your dealer.
Service Electric Parking Brake Light
The parking brake status light comes on when the brake is applied. If the light continues flashing after the parking brake is released, or while driving, there is a problem with the electric parking brake system. A message may also display on the Driver Information
The service electric parking brake light should come on briefly when the vehicle is in ON/RUN. If it does not come on, have the vehicle serviced by your dealer. If this light stays on, there is a problem with a system on the vehicle that is causing the parking brake system to work at a reduced level. The vehicle can still be driven, but should be taken to a dealer as soon as possible. See Electric
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (16,1)
5-16
Instruments and Controls
Parking Brake on page 9-27. If a message displays in the Driver Information Center (DIC), see Brake System Messages on page 5-26.
Antilock Brake System (ABS) Warning Light
This light comes on briefly when the engine is started. If it does not, have the vehicle serviced by your dealer. If the ABS light stays on, turn the ignition off. If the light comes on while driving, stop as soon as it is safely possible and turn off the vehicle. Then start the engine again to reset the system. If the ABS light stays on, or comes on again while driving, the
vehicle needs service. A chime may also sound when the light comes on steady. If the ABS light is the only light on, the vehicle has regular brakes, but the antilock brakes are not functioning. If both the ABS and the brake system warning light are on, the vehicle's antilock brakes are not functioning and there is a problem with the regular brakes. See your dealer for service. See Brake System Warning Light on page 5-14 and Brake System Messages on page 5-26.
Lane Departure Warning (LDW) Light
This light comes on green when the system is on and ready to operate. When the system determines that the vehicle is leaving its lane without using the turn signal, this light will change to amber and flash. See Lane Departure Warning (LDW) on page 9-44.
Forward Collision Alert (FCA) Warning Light
The forward collision alert comes on and warns when a vehicle is being rapidly approached. See Forward Collision Alert (FCA) System on page 9-40 for more information.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (17,1)
Instruments and Controls
5-17
Vehicle Ahead Indicator
If equipped, this light displays green when a vehicle is detected ahead. This light will display amber when you are following a vehicle ahead much too closely. See Forward Collision Alert (FCA) System on page 9-40.
Traction Off Light
This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off. The traction off light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/StabiliTrak button. This light and the StabiliTrak OFF light come on when StabiliTrak is turned off. If the TCS is off, wheel spin is not limited. Adjust driving accordingly. See Traction Control/Electronic Stability Control on page 9-30.
StabiliTrak® OFF Light
This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the StabiliTrak system is turned off. If StabiliTrak is off, the Traction Control System (TCS) is also off. If the StabiliTrak and TCS are off, the system does not assist in controlling the vehicle. Turn on the TCS and the StabiliTrak systems and the warning light turns off. See Traction Control/Electronic Stability Control on page 9-30.
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (18,1)
5-18
Instruments and Controls
Traction Control System (TCS)/StabiliTrak® Light
If the indicator/warning light is on and flashing, the TCS and/or the StabiliTrak system is actively working. See Traction Control/Electronic Stability Control on page 9-30.
Tire Pressure Light
This light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light is on and not flashing, the TCS, and potentially the StabiliTrak system have been disabled. A DIC message may display. Check the DIC messages to determine which feature(s) is no longer functioning and whether the vehicle requires service.
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS.
When the Light Is On Steady This indicates that one or more of the tires are significantly underinflated.
A Driver Information Center (DIC) tire pressure message may also display. See Tire Messages on page 5-31. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label. See Tire Pressure on page 10-41.
When the Light Flashes First and Then Is On Steady If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle. See Tire Pressure Monitor Operation on page 10-43.
Engine Oil Pressure Light
{ Caution Lack of proper engine oil maintenance can damage the engine. Driving with the engine
(Continued)
Chevrolet SS Sedan Owner Manual (GMNA-Localizing-U.S.-6014851) - 2014 - 1st Edition - 8/22/13
Black plate (19,1)
Instruments and Controls
5-19
could be low on oil and might have some other system problem. See your dealer.
Low Fuel Warning Light
Security Light
This light is near the fuel gauge and comes on briefly when the ignition is turned on as a check to show it is working. It also comes on when the fuel tank is low on fuel. The light turns off when fuel is added. If it does not, have the vehicle serviced.
The security light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system. See Immobilizer Operation on page 2-15.
Caution (Continued)
