Download PDF Manual

the child's abdomen. In a crash, the belt would apply force on a body area that is unprotected by any bony structure. This alone could cause serious or fatal injuries. To reduce the risk of serious or fatal injuries during a crash, young children should always be secured in appropriate child restraints.


restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufacturer instructions that come with the restraint state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs.


{ Warning


To reduce the risk of neck and head injury in a crash, infants and toddlers should be secured in a rear-facing child restraint until age two, or until they reach the maximum height and weight limits of their child restraint.


Q: What are the different types of


add-on child restraints?


A: Add-on child restraints, which are purchased by the vehicle owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child's weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used. For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


72


Seats and Restraints


Child Restraint Systems


Forward-Facing Child Seat


Booster Seats


A forward-facing child seat provides restraint for the child's body with the harness.


Rear-Facing Infant Seat


A rear-facing infant seat provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.


A booster seat is a child restraint designed to improve the fit of the vehicle's safety belt system. A booster seat can also help a child to see out the window. Securing an Add-On Child Restraint in the Vehicle { Warning


A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child


(Continued)


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Warning (Continued)


restraint properly in the vehicle using the vehicle safety belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual.


To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraint systems must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system. See Lower Anchors and Tethers for Children (LATCH System) 0 74. Children can be endangered in a crash if the child restraint is not properly secured in the vehicle. When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are


important, so if they are not available, obtain a replacement copy from the manufacturer. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it. In some areas of the United States and Canada, Certified Child Passenger Safety Technicians (CPSTs) are available to inspect and demonstrate how to correctly use and install child restraints. In the U.S., refer to the National Highway Traffic Safety Administration (NHTSA) website to locate the nearest child safety seat inspection station. For CPST availability in Canada, check with Transport Canada or the Provincial Ministry of Transportation office.


Seats and Restraints


73


Securing the Child Within the Child Restraint


{ Warning


A child can be seriously injured or killed in a crash if the child is not properly secured in the child restraint. Secure the child properly following the instructions that came with that child restraint.


Where to Put the Restraint According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. Whenever possible, children aged 12 and under should be secured in a rear seating position. Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great if the airbag deploys.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


74


Seats and Restraints


{ Warning


A child in a rear-facing child restraint can be seriously injured or killed if the front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the front passenger airbag inflates and the passenger seat is in a forward position. Even if the passenger sensing system has turned off the front passenger frontal airbag, no system is fail-safe. No one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off. Secure rear-facing child restraints in a rear seat, even if the airbag is off. If you secure a forward-facing child restraint in


(Continued)


Warning (Continued)


the front seat, always move the front passenger seat as far back as it will go. It is better to secure the child restraint in a rear seat. See Passenger Sensing System 0 62 for additional information.


When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. Child restraints and booster seats vary considerably in size, and some may fit in certain seating positions better than others. Depending on where you place the child restraint and the size of the child restraint, you may not be able to access adjacent safety belt assemblies or LATCH anchors for additional passengers or child restraints. Adjacent seating positions should not be used if the


child restraint prevents access to or interferes with the routing of the safety belt. Wherever a child restraint is installed, be sure to secure the child restraint properly. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it.


Lower Anchors and Tethers for Children (LATCH System) The LATCH system secures a child restraint during driving or in a crash. LATCH attachments on the child restraint are used to attach the child restraint to the anchors in the vehicle. The LATCH system is designed to make installation of a child restraint easier. In order to use the LATCH system in your vehicle, you need a child restraint that has LATCH


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


attachments. LATCH-compatible rear-facing and forward-facing child seats can be properly installed using either the LATCH anchors or the vehicle’s safety belts. Do not use both the safety belts and the LATCH anchorage system to secure a rear-facing or forward-facing child seat. Booster seats use the vehicle’s safety belts to secure the child in the booster seat. If the manufacturer recommends that the booster seat be secured with the LATCH system, this can be done as long as the booster seat can be positioned properly and there is no interference with the proper positioning of the lap-shoulder belt on the child. Make sure to follow the instructions that came with the child restraint, and also the instructions in this manual. When installing a child restraint with a top tether, you must also use either the lower anchors or the safety belts to properly secure the


child restraint. A child restraint must never be installed using only the top tether and anchor. The LATCH anchorage system can be used until the combined weight of the child plus the child restraint is 29.5 kg (65 lbs). Use the safety belt alone instead of the LATCH anchorage system once the combined weight is more than 29.5 kg (65 lbs). The following explains how to attach a child restraint with these attachments in the vehicle. Not all vehicle seating positions or child restraints have lower anchors and attachments or top tether anchors and attachments. In this case, the safety belt must be used (with top tether where available) to secure the child restraint. See Securing Child Restraints (Rear Seat) 0 80 or Securing Child Restraints (Front Passenger Seat) 0 82.


Seats and Restraints


75


Lower Anchors


Lower anchors (1) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (2).


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


76


Seats and Restraints


Top Tether Anchor


A top tether (3, 4) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (2) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash. The child restraint may have a single tether (3) or a dual tether (4). Either will have a single attachment (2) to secure the top tether to the anchor.


Some child restraints that have a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Be sure to read and follow the instructions for your child restraint. Lower Anchor and Top Tether Anchor Locations


H (Lower Anchor) : Seating positions with two lower anchors.


To assist in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion.


To assist in locating the top tether anchors, the top tether anchor symbol is on the cover for sedan models or near the anchors on hatchback models.


I (Top Tether Anchor) : Seating positions with top tether anchors.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Seats and Restraints


77


the instructions that come with the child restraint say that the top tether must be attached. According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. See Where to Put the Restraint 0 73 for additional information. Securing a Child Restraint Designed for the LATCH System


{ Warning


If a LATCH-type child restraint is not attached to anchors or with the safety belt, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Install a LATCH-type child restraint properly using the anchors, or use the vehicle safety belts to secure the restraint,


(Continued)


Sedan


Hatchback


For sedan models, the top tether anchors are under the covers behind the rear seat on the filler panel. Pull open the cover to access the top tether anchors. Be sure to use an anchor on the same side of the vehicle as the seating position where the child restraint will be placed.


For hatchback models, the top tether anchors are on the back of the rear seatbacks. Remove the cargo cover before installing the top tether. The cargo cover should remain off while the top tether is in use. Be sure to use an anchor on the same side of the vehicle as the seating position where the child restraint will be placed. Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


78


Seats and Restraints


Warning (Continued)


following the instructions that came with the child restraint and the instructions in this manual.


{ Warning


To reduce the risk of serious or fatal injuries during a crash, do not attach more than one child restraint to a single anchor. Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a crash. A child or others could be injured.


{ Warning


Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck. The shoulder belt can tighten but cannot be loosened if it is locked. The shoulder belt locks when it is pulled all the way out of the retractor. It unlocks when the shoulder belt is allowed to go all the way back into the retractor, but it cannot do this if it is wrapped around a child’s neck. If the shoulder belt is locked and tightened around a child’s neck, the only way to loosen the belt is to cut it. Buckle any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, and tighten the belt behind the child restraint after the child restraint has been installed.


Caution


Do not let the LATCH attachments rub against the vehicle’s safety belts. This may damage these parts. If necessary, move buckled safety belts to avoid rubbing the LATCH attachments. Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its stowed position, before folding the seat.


If you need to secure more than one child restraint in the rear seat, see Where to Put the Restraint 0 73. This system is designed to make the installation of child restraints easier. When using lower anchors, do not use the vehicle's safety belts. Instead, use the vehicle's anchors and child restraint attachments to secure the restraints. Some restraints also use another vehicle anchor to secure a top tether.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


1. Attach and tighten the lower


attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual. 1.1. Find the lower anchors for


the desired seating position.


1.2. Put the child restraint on


the seat.


1.3. Attach and tighten the


lower attachments on the child restraint to the lower anchors.


If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps:


2.


2.1. Find the top tether anchor. 2.2. Open the cover,


if equipped, to access the top tether anchors.


2.3. For hatchback models, remove the cargo cover before installing the top tether. The cargo cover should remain off while the top tether is in use.


2.4. Route and tighten the top


tether according to your child restraint instructions and the following instructions:


If the position you are using does not have a headrest or head restraint


Seats and Restraints


79


and you are using a single tether, route the tether over the seatback.


If the position you are using does not have a headrest or head restraint and you are using a dual tether, route the tether over the seatback.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


80


Seats and Restraints


If the position you are using has an adjustable headrest or head restraint and you are using a single tether, raise the headrest or head restraint and route the tether under the headrest or head restraint and in between the headrest or head restraint posts.


If the position you are using has an adjustable headrest or head restraint and you are using a dual tether, raise the headrest or head restraint and route the tether under the


headrest or head restraint and around the headrest or head restraint posts. 3. Before placing a child in the


child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement for proper installation.


Replacing LATCH System Parts After a Crash { Warning


A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash,


(Continued)


Warning (Continued)


see your dealer to have the system inspected and any necessary replacements made as soon as possible.


If the vehicle has the LATCH system and it was being used during a crash, new LATCH system parts may be needed. New parts and repairs may be necessary even if the LATCH system was not being used at the time of the crash.


Securing Child Restraints (Rear Seat) When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH System) 0 74 for how and where to


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


install the child restraint using LATCH. If a child restraint is secured in the vehicle using a safety belt and it uses a top tether, see Lower Anchors and Tethers for Children (LATCH System) 0 74 for top tether anchor locations. Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. If the child restraint or vehicle seat position does not have the LATCH system, you will be using the safety belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.


If more than one child restraint needs to be installed in the rear seat, be sure to read Where to Put the Restraint 0 73. 1. Put the child restraint on


the seat.


2. Pick up the latch plate, and run


the lap and shoulder portions of the vehicle safety belt through or around the restraint. The child restraint instructions will show you how.


3. Push the latch plate into the


buckle until it clicks.


Seats and Restraints


81


Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.


4. Pull the shoulder belt all the


way out of the retractor to set the lock. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


82


Seats and Restraints


6.


If the child restraint has a top tether, follow the child restraint manufacturer's instructions regarding the use of the top tether. See Lower Anchors and Tethers for Children (LATCH System) 0 74 for more information.


7. Before placing a child in the


child restraint, make sure it is securely held in place. To check, grasp the child restraint at the safety belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement.


To remove the child restraint, unbuckle the vehicle safety belt and let it return to the stowed position. If the top tether is attached to a top tether anchor, disconnect it.


Securing Child Restraints (Front Passenger Seat) This vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put the Restraint 0 73. In addition, the vehicle has a passenger sensing system which is designed to turn off the front outboard passenger frontal airbag and knee airbag under certain conditions. See Passenger Sensing System 0 62 and Passenger Airbag Status Indicator 0 99 for more information on this, including important safety information. Never put a rear-facing child seat in the front. This is because the risk to the rear-facing child is so great, if the airbag deploys.


{ Warning


A child in a rear-facing child restraint can be seriously injured or killed if the front outboard passenger frontal airbag inflates.


(Continued)


5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 4 and 5.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Warning (Continued)


Warning (Continued)


This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the front outboard passenger frontal airbag inflates and the passenger seat is in a forward position. Even if the passenger sensing system has turned off the front outboard passenger airbag(s), no system is fail-safe. No one can guarantee that an airbag will not inflate under some unusual circumstance, even though the airbag(s) are off. Secure rear-facing child restraints in a rear seat, even if the airbag(s) are off. If you secure a forward-facing child restraint in the front outboard passenger seat, always move the seat as far (Continued)


back as it will go. It is better to secure the child restraint in a rear seat. See Passenger Sensing System 0 62 for additional information.


If the child restraint uses a top tether, see Lower Anchors and Tethers for Children (LATCH System) 0 74 for top tether anchor locations. Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached.


Seats and Restraints


83


When using the lap-shoulder belt to secure the child restraint in this position, follow the instructions that came with the child restraint and the following instructions: 1. Move the seat as far back as it


will go before securing the forward-facing child restraint. When the passenger sensing system has turned off the front outboard passenger frontal airbag and knee airbag, the off indicator on the passenger airbag status indicator should light and stay lit when you start the vehicle. See Passenger Airbag Status Indicator 0 99.


2. Put the child restraint on


the seat.


3. Pick up the latch plate, and run


the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


84


Seats and Restraints


4. Push the latch plate into the


buckle until it clicks. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.


Tilt the latch plate to adjust the belt if needed.


5. Pull the shoulder belt all the


way out of the retractor to set the lock. When the retractor lock is set, the belt can be tightened but not pulled out of the retractor.


6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. Try to pull the belt out of the retractor to make sure the retractor is locked. If the retractor is not locked, repeat Steps 5 and 6.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Seats and Restraints


85


7. Before placing a child in the


child restraint, make sure it is securely held in place. To check, grasp the child restraint at the safety belt path and attempt to move it side to side and back and forth. When the child restraint is properly installed, there should be no more than 2.5 cm (1 in) of movement.


If the airbags are off, the off indicator in the passenger airbag status indicator will come on and stay on when the vehicle is started. If a child restraint has been installed and the off symbol is not lit, see “If the On Indicator Is Lit for a Child Restraint” under Passenger Sensing System 0 62. To remove the child restraint, unbuckle the vehicle's safety belt and let it go back all the way.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Storage


86
Storage


Storage Compartments


Storage Compartments . . . . . . . . 86
Instrument Panel Storage . . . . . . 86
Glove Box . . . . . . . . . . . . . . . . . . . . . 86


Luggage/Load Locations


Load Compartment


(Hatchback) . . . . . . . . . . . . . . . . . . 87


Additional Storage Features


Cargo Cover (Hatchback) . . . . . . 87


Storage Compartments { Warning


Do not store heavy or sharp objects in storage compartments. In a crash, these objects may cause the cover to open and could result in injury.


Instrument Panel Storage


Lift up on the lever to open. If equipped, the storage area has an auxiliary input jack and USB port inside. See USB Port 0 142 and Auxiliary Devices 0 144.


Glove Box Lift up on the glove box lever to open it.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


To install the load compartment cover: 1. Align the front sides of the load


compartment cover into the slots on both sides at the front of the load compartment.


2. Lower the load compartment cover onto the lip around the load compartment.


Luggage/Load Locations


Load Compartment (Hatchback) The load compartment cover can be used to conceal objects under it or removed and placed on the bottom of the load compartment to carry larger loads. To remove the load compartment cover: 1. Lift up on the load


compartment cover and pull out.


2. Store the load compartment


cover on the bottom of the load compartment.


Storage


87


Additional Storage Features


Cargo Cover (Hatchback)


{ Warning


An unsecured cargo cover could strike people in a sudden stop or turn, or in a crash. Store the cargo cover securely or remove it from the vehicle.


The cargo cover can be used to cover items in the rear of the vehicle. To remove the cargo cover: 1. Remove both of the cords from


the hooks at the top of the liftgate.


2. Push up on the underside of


the cargo cover at both pins at the front sides of the cargo cover.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


88


Storage


To install the cargo cover: 1. Align the clips on the underside


of the cargo cover over the pins on both sides of the cargo area and push down.


2. Reconnect both of the cords to


the hooks at the top of the liftgate.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Instruments and Controls


89


Front Fog Lamp Light . . . . . . . . . 108
Lamps On Reminder . . . . . . . . . 108
Cruise Control Light . . . . . . . . . . 108
Door Ajar Light . . . . . . . . . . . . . . . 109


Information Displays


Driver Information


Center (DIC) . . . . . . . . . . . . . . . . 109


Vehicle Messages


Vehicle Messages . . . . . . . . . . . . 111
Engine Oil Messages . . . . . . . . . 111
Tire Messages . . . . . . . . . . . . . . . . 111


Trip Computer


Trip Computer . . . . . . . . . . . . . . . . 111


Vehicle Personalization


Vehicle Personalization . . . . . . . 113


Instruments and Controls


Controls


Steering Wheel Adjustment . . . . 90
Steering Wheel Controls . . . . . . . 90
Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Windshield Wiper/Washer . . . . . . 91
Rear Window Wiper/Washer . . . 92
Compass . . . . . . . . . . . . . . . . . . . . . . 92
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Power Outlets . . . . . . . . . . . . . . . . . 94


Warning Lights, Gauges, and Indicators


Warning Lights, Gauges, and


Indicators . . . . . . . . . . . . . . . . . . . . 95
Instrument Cluster . . . . . . . . . . . . . 96
Speedometer . . . . . . . . . . . . . . . . . . 97
Odometer . . . . . . . . . . . . . . . . . . . . . . 97
Trip Odometer . . . . . . . . . . . . . . . . . 97
Tachometer . . . . . . . . . . . . . . . . . . . . 97
Fuel Gauge . . . . . . . . . . . . . . . . . . . . 97
Safety Belt Reminders . . . . . . . . . 98
Airbag Readiness Light . . . . . . . . 99
Passenger Airbag Status


Indicator . . . . . . . . . . . . . . . . . . . . . . 99
Charging System Light . . . . . . . 100


Malfunction Indicator Lamp


(Check Engine Light) . . . . . . . . 100
Service Vehicle Soon Light . . . 102
Owner Manual Indicator . . . . . . 102
Brake System Warning


Light . . . . . . . . . . . . . . . . . . . . . . . . 102


Antilock Brake System (ABS)


Warning Light . . . . . . . . . . . . . . . 103
Up-Shift Light . . . . . . . . . . . . . . . . . 103
Power Steering Warning


Light . . . . . . . . . . . . . . . . . . . . . . . . 104


Lane Departure Warning


(LDW) Light . . . . . . . . . . . . . . . . . 104


Forward Collision Alert (FCA)


Warning Light . . . . . . . . . . . . . . . 104
Vehicle Ahead Indicator . . . . . . 104
Traction Off Light . . . . . . . . . . . . . 105
StabiliTrak® OFF Light . . . . . . . . 105
Traction Control System (TCS)/


StabiliTrak® Light . . . . . . . . . . . 105


Engine Coolant Temperature


Warning Light . . . . . . . . . . . . . . . 106
Tire Pressure Light . . . . . . . . . . . 106
Engine Oil Pressure Light . . . . 106
Low Fuel Warning Light . . . . . . 107
Immobilizer Light . . . . . . . . . . . . . 107
Reduced Engine Power


Light . . . . . . . . . . . . . . . . . . . . . . . . 107
High-Beam On Light . . . . . . . . . . 108
Daytime Running Lamps (DRL)


Indicator Light . . . . . . . . . . . . . . . 108


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


90


Instruments and Controls


Controls


Steering Wheel Adjustment


Steering Wheel Controls


To adjust the steering wheel: 1. Pull the lever down. 2. Move the steering wheel up,


down, forward, and backward.


3. Pull the lever up to lock the


steering wheel in place.


Do not adjust the steering wheel while driving.


Some audio steering wheel controls could differ depending on the vehicle's options. Some audio controls can be adjusted at the steering wheel. b / g (Press to Talk) : For vehicles with Bluetooth or OnStar, press to interact with those systems. See Bluetooth (Voice Recognition) 0 153
or Bluetooth (Overview) 0 146 or Bluetooth (Infotainment Controls) 0 147 or OnStar (if equipped).


$ / i (Mute/End Call) : Press to decline an incoming call, to end speech recognition, or to end a current call. Press to silence the vehicle speakers while using the infotainment system. Press again to turn the sound on. For vehicles with OnStar or Bluetooth systems, press to reject an incoming call, or end a current call. _ SRC ^ (Source) : Press to select an audio source. Toggle up or down to select the next or previous favorite radio station, USB file, iPod/iPhone song or Bluetooth music. Toggle and hold up or down to fast forward or reverse the radio stations, USB files, iPod/iPhone songs or Bluetooth music. + x − (Volume) : Press + or − to increase or decrease the volume.


Horn Press a on the steering wheel pad to sound the horn.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Windshield Wiper/Washer


Sedan


Hatchback


The windshield wiper/washer lever is on the right side of the steering column. Move the lever to one of the following positions: HI : Use for fast wipes. LO : Use for slow wipes.


Instruments and Controls


91


If the ignition is put in OFF while the wipers are performing wipes due to windshield washing, the wipers continue to run until they reach the base of the windshield. n L (Windshield Washer) : Pull the windshield wiper lever toward you to spray windshield washer fluid and activate the wipers. The wipers will continue until the lever is released or the maximum wash time is reached. When the windshield wiper lever is released, additional wipes may occur depending on how long the windshield washer had been activated. See Washer Fluid 0 237 for information on filling the windshield washer fluid reservoir.


{ Warning


In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision.


Hatchback Shown, Sedan Similar INT (Intermittent Wipes) : Move the lever up to INT for intermittent wipes, then turn the x INT band up for more frequent wipes or down for less frequent wipes. OFF : Use to turn the wipers off. 1X (Mist) : For a single wipe, briefly move the wiper lever down. For several wipes, hold the wiper lever down.


Wiper Parking If the ignition is put in OFF while the wipers are on LO, HI, or INT, they will immediately stop. If the windshield wiper lever is then moved to OFF before the driver door is opened or within 10 minutes, the wipers will restart and move to the base of the windshield.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


92


Instruments and Controls


Clear snow and ice from the wiper blades before using them. If frozen to the windshield, carefully loosen or thaw them. Damaged wiper blades should be replaced. See Wiper Blade Replacement 0 242. Heavy snow or ice can overload the wiper motor. A circuit breaker will stop the motor until it cools down.


Rear Window Wiper/ Washer If equipped with the rear wiper/ washer, the controls are on the end of the windshield wiper lever.


ON : Press the upper portion of the button for continuous rear window wipes.


OFF : The rear wiper turns off when the button is returned to the middle position. INT (Intermittent Rear Wipes) : Press the lower portion of the button to set a delay between wipes. a (Rear Washer) : Push the windshield wiper lever forward to spray washer fluid on the rear window. The lever returns to its starting position when released.


Auto Wipe in Reverse Gear If the rear wiper control is off, the rear wiper will automatically operate continuously when the shift lever is in R (Reverse), and the front windshield wiper is performing low or high speed wipes. If the rear wiper control is off, the shift lever is in R (Reverse), and the front windshield wiper is performing interval wipes, then the rear wiper automatically performs interval wipes. This feature can be changed. See Vehicle Personalization 0 113.


The windshield washer reservoir is used for the windshield and the rear window. Check the fluid level in the reservoir if either washer is not working. See Washer Fluid 0 237.


Compass The vehicle may have a compass display in the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak, and vehicle speed information. Avoid covering the GPS antenna, located on the roof, for long periods of time with objects that may interfere with the antenna's ability to receive a satellite signal. The compass system is designed to operate for a certain number of miles or degrees of turn before needing a signal from the GPS satellites. When the compass display shows CAL, drive the vehicle for a short distance in an open area where it can receive a GPS signal. The compass system


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Instruments and Controls


93


will automatically determine when the GPS signal is restored and provide a heading again.


Clock The infotainment system controls are used to access the time and date settings through the menu system. See Operation 0 132 for information about how to use the menu system. Radio without Touchscreen To set the time and date: 1. Press CLOCK. 2. Select Time and Date Settings. 3. Select Set Time or Set Date. 4. Turn the MENU/TUNE knob to


adjust the highlighted value.


5. Press the MENU/TUNE knob to


select the next value.


6. To save the time or date and return to the Time and Date Settings menu, press the / BACK button at any time or


press the MENU/TUNE knob after adjusting the minutes or year.


To set the 12/24 hour format: 1. Press CLOCK. 2. Select Time and Date Settings. 3. Highlight Set Time Format. 4. Press the MENU/TUNE knob to


select the 12 hour or 24 hour display format.


To set the month and day format: 1. Press CLOCK. 2. Select Time and Date Settings. 3. Highlight Set Date Format. 4. Press the MENU/TUNE knob to


select MM/DD/YYYY (month/ day/year), or DD/MM/YYYY (day/month/year), or YYYY/ MM/DD (year/month/day).


Radio with Touchscreen The infotainment system controls are used to access the time and date settings through the menu


system. See Operation 0 132 for information about how to use the menu system. Setting the 12/24 Hour Format 1. Press D , and then press


settings.


2. Press time and date settings. 3. Select 12/24 HR Format. 4. Press 4. Setting the Month and Day Format 1. Press D , and then press


settings.


2. Press time and date settings. 3. Press S or T to set the date display to DD/MM/YYYY (day/ month/year), MM/DD/YYYY (month/day/year), or YYYY/ MM/DD (year/month/day) display format.


4. Press 4.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


94


Instruments and Controls


Setting the Time and Date 1. Press D, and then press


settings.


2. Press time and date settings,


and then set time and date. 3. Press y or z to adjust the


value.


4. Press 4. Automatic Clock Sync 1. Press D, and then press


settings.


2. Press time and date settings,


and then automatic clock sync.


3. Select On to display the real time or Off to display the time set by the user.


4. Press 4.


Power Outlets The accessory power outlets can be used to plug in electrical equipment, such as a cell phone or MP3 player. The vehicle has an accessory power outlet in front of the cupholders on the center floor console. Remove the cover to access and replace when not in use. { Warning


Power is always supplied to the outlets. Do not leave electrical equipment plugged in when the vehicle is not in use because the vehicle could catch fire and cause injury or death.


Caution


Leaving electrical equipment plugged in for an extended period of time while the vehicle is off will drain the battery. Always unplug electrical equipment when not in use and do not plug in equipment that exceeds the maximum 20 amp rating.


Certain accessory power plugs may not be compatible with the accessory power outlet and could overload vehicle or adapter fuses. If a problem is experienced, see your dealer. When adding electrical equipment, be sure to follow the proper installation instructions included with the equipment. See Add-On Electrical Equipment 0 217.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Caution


Hanging heavy equipment from the power outlet can cause damage not covered by the vehicle warranty. The power outlets are designed for accessory power plugs only, such as cell phone charge cords.


Warning Lights, Gauges, and Indicators Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges could prevent injury.


Instruments and Controls


95


Some warning lights come on briefly when the engine is started to indicate they are working. When one of the warning lights comes on and stays on while driving, or when one of the gauges shows there may be a problem, check the section that explains what to do. Waiting to do repairs can be costly and even dangerous.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


96


Instruments and Controls


Instrument Cluster


English Manual Transmission Shown, Metric Similar


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Speedometer The speedometer shows the vehicle's speed in either kilometers per hour (km/h) or miles per hour (mph).


Odometer


The odometer shows how far the vehicle has been driven, in either kilometers or miles.


Trip Odometer


The trip odometer shows how far the vehicle has been driven since the trip odometer was last reset.


Press the trip odometer reset stem on the cluster to switch between the odometer and trip odometer. To reset the trip odometer to zero, press and hold the trip odometer reset stem while the trip odometer is displayed. Be careful not to reset the engine oil life monitor accidentally.


Tachometer The tachometer displays the engine speed in revolutions per minute (rpm).


Caution


If the engine is operated with the rpm’s in the warning area at the high end of the tachometer, the vehicle could be damaged, and the damage would not be covered by the vehicle warranty. Do not operate the engine with the rpm’s in the warning area.


Instruments and Controls


97


Fuel Gauge


The fuel gauge indicates about how much fuel is left when the ignition is turned to ON/RUN. When the tank nears empty, the low fuel warning light will come on. There is still a little fuel left, but the vehicle's fuel tank should be filled soon. See Low Fuel Warning Light 0 107 for more information. An arrow on the fuel gauge indicates on which side of the vehicle the fuel door is located.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


98


Instruments and Controls


Here are four things that some owners ask about. None of these show a problem with the fuel gauge: . At the service station, the gas


pump shuts off before the gauge reads full. It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it actually took a little more or less than half the tank's capacity to fill the tank.


. The indicator moves a little when turning a corner or speeding up. . The gauge goes back to empty when the ignition is turned off.


Safety Belt Reminders


Driver Safety Belt Reminder Light There is a driver safety belt reminder light on the instrument cluster.


When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving. If the driver safety belt is buckled, neither the light nor the chime comes on. Passenger Safety Belt Reminder Light There is a passenger safety belt reminder light near the passenger airbag status indicator. See Passenger Sensing System 0 62.


When the vehicle is started, this light flashes and a chime may come on to remind passengers to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle continues several times if the passenger remains or becomes unbuckled while the vehicle is moving. If the passenger safety belt is buckled, neither the chime nor the light comes on. The front passenger safety belt reminder light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the reminder light and/or chime, remove the object from the seat or buckle the safety belt.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Instruments and Controls


99


Airbag Readiness Light This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), passenger sensing system, the pretensioners (if equipped), the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System 0 56.


The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately.


{ Warning


If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.


Passenger Airbag Status Indicator The vehicle has a passenger sensing system. See Passenger Sensing System 0 62 for important safety information. The instrument panel has a passenger airbag status indicator.


United States


Canada


When the vehicle is started, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds as a system check. Then, after several seconds, the status indicator will light either ON or OFF, or the on or off symbol to let you know the status of the front outboard passenger frontal airbag and knee airbag. If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the front


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


100


Instruments and Controls


outboard passenger frontal airbag and knee airbag are allowed to inflate. If the word OFF or the off symbol is lit on the passenger airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag and knee airbag. If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service.


{ Warning


If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light 0 99 for more information, including important safety information.


Charging System Light


This light will come on briefly when the ignition is turned on, and the engine is not running, as a check to show it is working. It should go out when the engine is started. If it stays on, or comes on while driving, there may be a problem with the electrical charging system. Have it checked by your dealer. Driving while this light is on could drain the battery. If a short distance must be driven with the light on, turn off all accessories, such as the radio and air conditioner, to help reduce the drain on the battery.


Malfunction Indicator Lamp (Check Engine Light) This light is part of the vehicle’s emission control on-board diagnostic system. If this light is on while the engine is running, a malfunction has been detected and the vehicle may require service. The light should come on to show that it is working when the ignition is in ON/RUN with the engine not running. See Ignition Positions 0 191.


Malfunctions are often indicated by the system before any problem is noticeable. Being aware of the light and seeking service promptly when it comes on may prevent damage.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Instruments and Controls


101


Caution


If the vehicle is driven continually with this light on, the emission control system may not work as well, the fuel economy may be lower, and the vehicle may not run smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.


Caution


Modifications to the engine, transmission, exhaust, intake, or fuel system, or the use of replacement tires that do not meet the original tire specifications, can cause this light to come on. This could lead to costly repairs not covered by the vehicle warranty. This could also affect the vehicle’s ability to pass an Emissions Inspection/ Maintenance test. See Accessories and Modifications 0 220.


If the light is flashing : A malfunction has been detected that could damage the emission control system and increase vehicle emissions. Diagnosis and service may be required. To help prevent damage, reduce vehicle speed and avoid hard accelerations and uphill grades. If the light continues to flash, find a safe place to park. Turn the vehicle off and wait at least 10 seconds before restarting the engine. If the light is still flashing, follow the previous guidelines and see your dealer for service as soon as possible. If the light is on steady : A malfunction has been detected. Diagnosis and service may be required. Check the following: . A loose or missing fuel cap may cause the light to come on. See Filling the Tank 0 215. A few driving trips with the cap properly installed may turn the light off.


. Poor fuel quality can cause


inefficient engine operation and poor driveability, which may go away once the engine is warmed up. If this occurs, change the fuel brand. It may require at least one full tank of the proper fuel to turn the light off. See Fuel 0 213.


If the light remains on, see your dealer. Emissions Inspection and Maintenance Programs If the vehicle requires an Emissions Inspection/Maintenance test, the test equipment will likely connect to the vehicle's Data Link Connector (DLC).


The DLC is under the instrument panel to the left of the steering wheel. Connecting devices that are


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


102


Instruments and Controls


not used to perform an Emissions Inspection/Maintenance test or to service the vehicle may affect vehicle operation See Add-On Electrical Equipment 0 217. See your dealer if assistance is needed. The vehicle may not pass inspection if: . The light is on when the engine


is running.


. The light does not come on


when the ignition is in ON/RUN with the engine not running.


. Critical emission control systems


have not been completely diagnosed. If this happens, the vehicle would not be ready for inspection and might require several days of routine driving before the system is ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down, or if the vehicle has been recently serviced.


See your dealer if the vehicle will not pass or cannot be made ready for the test.


Service Vehicle Soon Light


For vehicles with this light, it comes on if a condition exists that may require the vehicle to be taken in for service. If the light comes on, take the vehicle to your dealer for service as soon as possible.


Owner Manual Indicator


This symbol is shown when you need to see the owner manual for additional instructions or information.


Brake System Warning Light The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working If the warning light comes on, there is a brake problem. Have the brake system inspected right away.


{ Warning


The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Antilock Brake System (ABS) Warning Light


Instruments and Controls


103


The ABS warning light will come on briefly when the ignition is turned to ON/RUN. This is normal. If the light does not come on then, have it fixed so it will be ready to warn if there is a problem.


Up-Shift Light


This light comes on briefly when the engine is started. If the light stays on, turn the ignition to LOCK/OFF or if the light comes on, stop as soon as possible and turn the ignition off. Then start the engine again to reset the system. If the light still stays on, or comes on again while driving, the vehicle needs service. See your dealer. If the regular brake system warning light is not on, the brakes will still work, but the antilock brakes will not work. If the regular brake system warning light is also on, the antilock brakes will not work and there is a problem with the regular brakes. See Brake System Warning Light 0 102.


For manual transmission vehicles, there is an up-shift light that comes on in the lower DIC area. It shows when to shift to the next higher gear for best fuel economy. See Manual Transmission 0 200.


Metric


English


This light should come on briefly when the ignition is turned to ON. If it does not come on then, have it fixed so it will be ready to warn if there is a problem. When the ignition is on, the brake system warning light will also come on when the parking brake is set. The light will stay on if the parking brake does not fully release. If it stays on after the parking brake is fully released, it means there is a brake problem. If the light comes on while driving, carefully pull off the road and stop. The pedal may be harder to push or may go closer to the floor. It may take longer to stop. If the light is still on, have the vehicle towed for service. See Towing the Vehicle 0 289.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


104


Instruments and Controls


Power Steering Warning Light


This light comes on briefly when the ignition is turned to ON/RUN as a check to show it is working. If it does not come on have the vehicle serviced by your dealer. If this light stays on, or comes on while driving, the system may not be working. If this happens, see your dealer for service.


Lane Departure Warning (LDW) Light


If equipped, this light, located in the center of the instrument panel, comes on briefly while starting the vehicle. If it does not come on, have the vehicle serviced. This light is green if LDW is on and ready to operate. This light changes to amber and flashes to indicate that the lane marking has been crossed without using a turn signal in that direction. See Lane Departure Warning (LDW) 0 212.


Forward Collision Alert (FCA) Warning Light This light is on the center of the instrument panel.


The red forward collision alert comes on and flashes when a vehicle is being approached too rapidly. The forward collision alert stays on when following a vehicle much too closely. See Forward Collision Alert (FCA) System 0 210.


Vehicle Ahead Indicator This light is on the center of the instrument panel.


If equipped, this indicator will display green when a vehicle is detected ahead See Forward Collision Alert (FCA) System 0 210.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Traction Off Light


StabiliTrak® OFF Light


Instruments and Controls


105


Traction Control System (TCS)/StabiliTrak® Light


This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off. The traction off light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/StabiliTrak button. This light and the StabiliTrak OFF light come on when StabiliTrak is turned off. If the TCS is off, wheel spin is not limited. Adjust driving accordingly. See Traction Control/Electronic Stability Control 0 204.


This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the StabiliTrak system is turned off. If StabiliTrak is off, the Traction Control System (TCS) is also off. If the StabiliTrak and TCS are off, the system does not assist in controlling the vehicle. Turn on the TCS and the StabiliTrak systems and the warning light turns off. See Traction Control/Electronic Stability Control 0 204.


The StabiliTrak or Traction Control System (TCS) indicator/warning light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light is on and not flashing, the TCS, and potentially the StabiliTrak system have been disabled. If the indicator/warning light is on and flashing, the TCS and/or the StabiliTrak system is actively working. See Traction Control/Electronic Stability Control 0 204.


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


106


Instruments and Controls


Engine Coolant Temperature Warning Light


The engine coolant temperature warning light comes on when the engine has overheated. If this happens, pull over and turn off the engine as soon as possible. See Engine Overheating 0 236.


Tire Pressure Light


This light comes on briefly while starting the vehicle. If it does not, have the vehicle serviced by your dealer. If the system is working normally the indicator light goes off.


Caution


The engine coolant temperature warning light indicates that the vehicle has overheated. Driving with this light on can damage the engine and it may not be covered by the vehicle warranty. See Engine Overheating 0 236.


For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS.


When the Light Is On Steady This indicates that one or more of the tires are significantly underinflated.


Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label. See Tire Pressure 0 261.


When the Light Flashes First and Then Is On Steady If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle. See Tire Pressure Monitor Operation 0 263.


Engine Oil Pressure Light


Caution


Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil


(Continued)


Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) - 2016 - CRC - 5/27/15


Instruments and Controls


107


Low Fuel Warning Light


Immobilizer Light


This light comes on for a few seconds when the ignition is turned on as a check to indicate it is working. If it does not come on, have it fixed. This light comes on when the vehicle is low on fuel. The low fuel warning light comes on when there are approximately 6.0 L (1.7 gal) of fuel remaining in the tank. To turn the light off, add fuel to the fuel tank. See Filling the Tank 0 215.


The immobilizer light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light stays on and the engine does not start, there could be a

Loading...
x