2016 Chevrolet Silverado Owners Manual

been handled.

Infotainment System

203

There can be increased skipping, difficulty in finding tracks, and/or difficulty in loading and ejecting. If these problems occur, check the disc for damage or try a known good disc. To avoid damage to the CD player: . Do not use scratched or

damaged discs.

. Do not apply labels to discs. The

labels could get caught in the player. Insert only one disc at a time. . Keep the loading slot free of foreign materials, liquids, and debris.

. Use a marking pen to label the

top of the disc.

Loading and Ejecting Discs To load a disc: 1. Turn the vehicle on. 2.

Insert a disc into the slot, label side up. The player pulls it in the rest of the way. If the disc

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

204

Infotainment System

is damaged or improperly loaded, there is an error and the disc ejects.

Playing an Audio CD Press the MEDIA button on the faceplate until CD is selected. On the CD main page, either a track number displays at the beginning of each track, or Song, Artist, and Album information displays when available. Use the following screen controls to play the disc: t: While on the CD main page: . Press to seek to the beginning of

the current or previous track. If the track has been playing for less than five seconds, it seeks to the previous track. If longer than five seconds, the current track starts from the beginning. . Press and hold to fast reverse

through a track. Release the button to return to playing speed. Elapsed time displays.

u: While on the CD main page: . Press to seek to the next track. . Press and hold to fast forward

through a track. Release the button to return to playing speed. Elapsed time displays. j /r: While on the CD main page, press to pause. Press again to resume. Z: Press Z to play the songs in random order. Press again to turn off. If a Blu-ray Disc® or DVD disc is loaded into the disc player and the CD screen button is selected, a message comes on the screen to use the Video application. The Video application is only available on vehicles with Rear Seat Entertainment (RSE).

CD Menu While on the CD main page, press the MENU knob to display the CD menu and the following may display: Browse : Select to display the files or songs on the CD.

Tone Settings : Select to adjust Bass, Midrange, Treble, Balance, Fade, and EQ (Equalizer). See “Tone Settings” under AM-FM Radio (Base Radio with Touchscreen) 0 195 or AM-FM Radio (Base Radio) 0 193. Auto Volume : If equipped, this feature adjusts the volume based on the vehicle speed. Select the level between Off, Low, Medium-Low, Medium, Medium-High, and High. Press BACK to go to the previous menu. DSP : If equipped, this feature adjusts the pre-defined settings. See “DSP” in AM-FM Radio (Base Radio with Touchscreen) 0 195 or AM-FM Radio (Base Radio) 0 193. EQ (Equalizer) : If equipped, this feature adjusts the equalizer settings. See “EQ (Equalizer)” in AM-FM Radio (Base Radio with Touchscreen) 0 195 or AM-FM Radio (Base Radio) 0 193.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

Error Messages If Disc Error displays and/or the disc comes out, it could be for one of the following reasons: . The disc has an invalid or

unknown format.

. The disc is very hot. Try the disc

again when the temperature returns to normal.

. The road is very rough. Try the

disc again when the road is smoother.

. The disc is dirty, scratched, wet,

or upside down.

. The air is very humid. Try the

disc again later.

. There was a problem while

burning the disc.

. The label is caught in the CD

player.

If Disc Player Error displays, it could be for one of the following reasons: . The player temperature is

too high.

. There are load or eject errors.

If the CD is not playing correctly for any other reason, try a known good CD. If any error continues, contact your dealer. Playing an MP3 CD To play an MP3 CD, follow the same instructions as “Playing an Audio CD.” The following guidelines must be met when creating an MP3 disc, otherwise the CD might not play: . Sampling rate: 16 kHz,

22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, and 48 kHz.

. Bit rates supported: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, 192, 224, 256, and 320 kbps.

. Maximum number of folders:

eight folders with 255 files per folder.

. Maximum of 1,000 files on

a disc.

. Recorded on a CD-R or CD-RW.

Infotainment System

205

Root Directory The root directory is treated as a folder. All files contained directly under the root directory are accessed prior to any root directory folders.

Empty Folders If a root directory or folder is empty or contains only folders, the player advances to the next folder in the file structure that contains a compressed audio file. The empty folder(s) are not displayed or numbered.

No Folder When the CD only contains compressed audio files without any folders, all files are under the root folder.

USB Port (Base Radio)

Playing from a USB A USB mass storage device or Media Transfer Protocol (MTP) device can be connected to the USB port.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

206

Infotainment System

The vehicle may have USB ports in the front of the center console, armrest, or one in the upper glove box. See Center Console Storage 0 118 and Glove Box 0 117.

USB MP3 Player and USB Drives . The USB MP3 players and USB

drives connected must comply with the USB Mass Storage Class specification (USB MSC).

. Hard disk drives are not

supported.

. Supported file system is FAT32. To play a USB device: . Connect the USB. . Press MEDIA on the faceplate

until the connected device is shown.

While the USB source is active, press the corresponding faceplate button for the icons on the screen to operate USB function: . t

. u . j /r

. Z

For information on how to use the screen icons, see “Playing an Audio CD.”

USB Menu Press MENU to display the USB menu and the following may display: Browse : Select to display the files and folders on the USB device. Tone Settings : Select to adjust Bass, Midrange, Treble, Balance, Fade, and EQ (Equalizer). See “Tone Settings” under “Playing an Audio CD” in CD Player 0 203. Auto Volume : If equipped, see “Playing an Audio CD” in CD Player 0 203. EQ (Equalizer) : If equipped, this feature adjusts the equalizer settings. See “EQ (Equalizer) Settings” in AM-FM Radio (Base Radio with Touchscreen) 0 195 or AM-FM Radio (Base Radio) 0 193.

Playing from an iPod®/iPad®/ iPhone® This feature supports the following devices:

iPod nano® (1st, 2nd, 3rd, and 4th generation) iPod with video (5.0 and 5.5
generation) iPod classic® (6th generation) iPod touch® (1st and 2nd generation) iPad iPhone 3G, iPhone 3GS, iPhone 4

There may be problems with operation and function in the following situations: . When connecting a device with

a more recent version of the firmware installed than is supported by the infotainment system.

. When connecting a device on

which firmware from other providers is installed.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

To connect and control a device: 1. Connect one end of the

standard USB cable to the device's dock connector.

2. Connect the other end to a

USB port in the center console. See Center Console Storage 0 118.

3. Press MEDIA to select the

source.

The music information displays on the radio’s display and begins playing through the vehicle’s audio system. The device battery recharges automatically while the vehicle is on. When the vehicle is off while a device is connected using the USB cable, the device battery stops charging and the device will automatically turn off. If the device is an unsupported model, it can still be listened to in the vehicle by connecting to the auxiliary input jack using a standard 3.5 mm (1/8 in) stereo cable.

Menu Press MENU to display the device Menu and the following may display: Browse : Select to display the files or songs on the device. See “Browse Device Media” later in this section. Tone Settings : Select to adjust Bass, Midrange, Treble, Balance, Fade, and EQ (Equalizer). See “Tone Settings” under “Playing an Audio CD” in CD Player 0 203. Auto Volume : If equipped, see “Playing an Audio CD” in CD Player 0 203. EQ (Equalizer) : If equipped, this feature adjusts the Equalizer settings. See “EQ (Equalizer)” in AM-FM Radio (Base Radio with Touchscreen) 0 195 or AM-FM Radio (Base Radio) 0 193.

Browse Device Media Use the following to browse: Playlists: 1. Turn MENU to highlight and

press to view the playlists stored on the device.

Infotainment System

207

2. Turn MENU to highlight and

press to select a playlist name to view a list of all songs in the playlist.

3. Turn MENU to highlight and

press to select the song from the list to begin playback.

Artists: 1. Turn MENU to highlight and

press to view the artists stored on the device.

2. Turn MENU to highlight and

press to select an artist name to view a list of all albums by the artist.

3. Turn MENU to highlight and

press to select an album name to view a list of all songs on the album.

4. Turn MENU to highlight and

press to select the song from the list to begin playback.

Albums: 1. Turn MENU to highlight and

press to view the albums stored on the device.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

208

Infotainment System

2. Turn MENU to highlight and

press to select an album name to view a list of all songs on the album.

3. Turn MENU to highlight and

press to select the song from the list to begin playback.

Genres: 1. Turn MENU to highlight and

press to view the genres stored on the device.

2. Turn MENU to highlight and

press to select a genre name to view a list of artists of that genre.

3. Turn MENU to highlight and

press to select to view albums by that artist.

4. Turn MENU to highlight and press to select an album to view songs.

5. Turn MENU to highlight and

press to select the song from the list to begin playback.

Songs: 1. Turn MENU to highlight and

press to view a list of all songs stored on the device.

2. Turn MENU to highlight and

press to select the song from the list to begin playback.

USB Port (Base Radio with Touchscreen)

Using the USB Port The infotainment system can play music or movies by connecting an auxiliary device to the USB port.

USB Support If equipped, the USB connector is in the front of the center console, and uses the USB 2.0 standard.

USB Supported Devices . USB Flash Drives . Portable USB Hard Drives Not all iPods and USB drives are compatible with the USB port.

Make sure the iPod has the latest firmware from Apple® for proper operation. iPod firmware can be updated using the latest iTunes® application. See www.apple.com/ itunes. For help with identifying your iPod, go to www.apple.com/support. The USB port can play both lower and upper case .mp3, .wma, .ogg, and .wav files stored on a USB storage device.

Supported Apple® Devices To view supported devices in U.S., see my.chevrolet.com\learned. To view supported devices in Canada, see chevroletowner.ca. To view supported devices in Mexico, see your dealer for details.

USB Supported File and Folder Structure The infotainment system supports: . FAT16. . FAT32. . exFAT.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

Connecting a USB Storage Device or iPod/iPhone To connect a USB storage device, connect the device to the USB port. To connect an iPod/iPhone, connect one end of the device’s cable to the iPod/iPhone and the other end to the USB port. The iPod/iPhone charges while it is connected to the vehicle if the vehicle is in ACC/ACCESSORY or ON/RUN. See Ignition Positions 0 276. When the vehicle is turned off, the iPod/iPhone automatically powers off and will not charge or draw power from the vehicle's battery. For more information on USB usage, see “Audio System Information” under Pictures and Movies (Picture System with Touchscreen) 0 237 or Pictures and Movies (Movie System with Touchscreen) 0 237 or Pictures and Movies (Audio System with Touchscreen) 0 232.

Playing Movies Movies are not available while driving. If the USB storage device is already connected: 1. Press {. 2. Touch GALLERY. 3. Touch s. 4. Touch the desired Movie.

Viewing Pictures Pictures are not available while driving. If the USB storage device is already connected: 1. Press {. 2. Touch GALLERY. 3. Touch \.

Auxiliary Jack This vehicle may have an AUX jack in the center console or armrest. See Center Console Storage 0 118.

Infotainment System

209

Possible auxiliary audio sources include: . Laptop computer . Audio music player This jack is not an audio output. Do not plug headphones into the auxiliary input jack. Auxiliary devices should be set up while the vehicle is in P (Park). Connect a 3.5 mm (1/8 in) cable from the auxiliary device to the auxiliary input jack. If an auxiliary device has already been connected, but a different source is currently active, press the MEDIA faceplate button repeatedly to scroll through all of the available audio source screens, until the AUX source screen is shown. Base Radio

Playing from the AUX Jack An auxiliary device is played through the audio system and controlled through the device itself.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

210

Infotainment System

AUX Menu Press the MENU knob to display the AUX menu and the following may display: Tone Settings : Select to adjust Bass, Midrange, Treble, Balance, Fade, and EQ (Equalizer). See “Tone Settings” in AM-FM Radio (Base Radio with Touchscreen) 0 195 or AM-FM Radio (Base Radio) 0 193. Auto Volume : If equipped, see “Playing an Audio CD.” DSP : If equipped, this feature adjusts the pre-defined settings. See “DSP” in AM-FM Radio (Base Radio with Touchscreen) 0 195 or AM-FM Radio (Base Radio) 0 193. EQ (Equalizer) : If equipped, this feature adjusts the pre-defined equalizer settings. See “EQ (Equalizer)” in AM-FM Radio (Base Radio with Touchscreen) 0 195 or AM-FM Radio (Base Radio) 0 193.

Base Radio with Touchscreen Play will begin when the system has finished reading the information on the device.

Playing Music To play the music from the device, if the device is already connected: 1. Press {. 2. Touch AUDIO. 3. Touch Source. 4. Touch AUX. To adjust the tone settings. See “Audio Settings” in “System Settings” under AM-FM Radio (Base Radio with Touchscreen) 0 195 or AM-FM Radio (Base Radio) 0 193.

Playing Movies Movies are not available while driving. If the device is already connected: 1. Press {. 2. Touch Movie. 3. Touch the desired Movie.

For iPod/iPhone, connect the iPod/ iPhone to the AUX input terminal by using the AUX cable for iPod/ iPhone to play movie files. iPhone 5 cell phones have a connector which no longer supports AUX connections to the radio. This feature is limited to older versions of iPhone. Using the AUX Movie Menu 1. Touch MENU from the AUX

movie screen. The AUX menu is displayed.

2. Touch the desired menu.

. Audio: Adjust the sound

setup. See “Audio Settings” in “System Settings” under AM-FM Radio (Base Radio with Touchscreen) 0 195 or AM-FM Radio (Base Radio) 0 193. 3. Touch 4.

Infotainment System

211

paused on the screen. Press play on the device or press r to begin playback. Some phones support sending Bluetooth music information to display on the radio. When the radio receives this information, it will check to see if any is available and display it. For more information about supported Bluetooth features, see www.gm.com/bluetooth.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

Bluetooth Audio If equipped, music may be played from a paired Bluetooth device. See “Pairing” under “Information Controls” inBluetooth (Voice Recognition - Base Radio) 0 223 or Bluetooth (Infotainment Controls - Base Radio) 0 219 or Bluetooth (Overview) 0 218 or Bluetooth (Infotainment Controls - Base Radio with Touchscreen) 0 228 for help pairing a device. Volume and song selection may be controlled by using the infotainment controls or the phone/device. If Bluetooth Audio is selected and nothing is heard, check the volume setting on both the phone/device and the infotainment system. Launch music by pressing the MEDIA screen button on the Home Page. To play music via Bluetooth: 1. Power on the device, and pair

to connect the device.

2. Once paired, go into the audio

application from the Home Page or via the application tray. Select MEDIA until Bluetooth displays.

Bluetooth Audio Menu Press the MENU screen button to display the Bluetooth Audio menu. The following may be available: Tone: Turn the MENU knob to adjust the tone settings. Press o BACK to go back to the previous menu. Manage Bluetooth Devices: Select to go to the Bluetooth page to add or delete devices. When selecting Bluetooth Audio, the radio may not be able to launch the audio player on the connected device to start playing. When the vehicle is not moving, use the phone to begin playback. All devices launch audio differently. When selecting Bluetooth Audio as a source, the radio may show as

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

212

Infotainment System

Voice Recognition If equipped, voice recognition allows for hands-free operation within the audio and phone applications. This feature can be started by pressing either the g button on the steering wheel or by selecting the g on the screen display. However, not all features within these areas are supported by voice commands. Generally, only complex tasks that require multiple manual interactions to complete are supported by voice commands. For example, tasks that take more than one or two button presses such as selecting a song or artist to play from a media device would be supported by voice commands. Other tasks, like adjusting the volume or seeking up or down are audio features that are easily performed by pressing one or two buttons, and are not supported by voice commands. In general there are flexible ways to speak commands for completing the tasks. Most of them, except

destination entry and voice keypad, can be completed in a single command. If the task takes more than one command to complete, the first command would be to indicate the kind of task that is to be performed. The system replies with prompts that lead through a dialog to enter the necessary information. Voice recognition can be used when the ignition is on or when Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) 0 279. Using Voice Recognition Voice recognition becomes available once the system has been initialized. This begins when the ignition is turned on. Initialization may take a few moments. 1. Press g on the steering wheel

control to activate voice recognition, or select g on the infotainment screen on the center stack.

If voice recognition is started from the steering wheel control, the

instrument cluster displays the selections and visual dialog content. If voice recognition is started from the infotainment screen, the selections and visual dialog content are displayed on both the center stack display and the instrument cluster display.

2. The audio system mutes and

the system plays a prompt followed by a beep.

3. Wait until after the beep

completes, then clearly speak one of the commands described in this section. Press g to interrupt any voice recognition system prompt. For example, if the prompt seems to be taking too long to finish, press g again and the beep should happen right away.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

There are two voice prompt modes supported: . Long verbal prompts: The longer

prompts provide more information regarding the supported actions.

. Short prompts: The short

prompts provide simple instructions about what can be stated.

If a command is not spoken, the voice recognition system says a help prompt.

Prompts and Screen Displays While a voice recognition session is active, there will be corresponding buttons on screens displayed. Manual interaction in the voice recognition session is permitted. Interaction during a voice session may be completed entirely using voice commands, or some selections may expedite a session. If a selection is made using a manual control, the dialog will progress in the same way as if the selection was made through a voice command. Once the system is able

to complete the task, or the session is terminated, the voice recognition dialog stops. An example of this type of manual intervention is pressing on an entry of a displayed number list instead of speaking the number associated with the entry desired. Canceling Voice Recognition . Press the Home screen button

to terminate the voice recognition session which was initiated by pressing g on the infotainment screen on the center stack.

. Press or say “Cancel” or “Exit” to

terminate the voice recognition session and display the screen from which voice recognition was initiated.

. Press i on the steering wheel

controls to terminate the voice session and display the screen from which voice recognition was initiated.

Infotainment System

213

Helpful Hints for Speaking Commands Voice recognition can understand commands that are either naturally stated in sentence form (English only), or direct commands that state the application and the task. For languages that do not support natural language commands in sentence form, use the direct commands shown as examples on the display screen. For best results: . Listen for the prompt and wait

for the beep before saying a command or reply.

. Say “Help” or look at the screen

display for commands.

. Voice recognition system prompt

can be interrupted during a prompt by pressing g again. For example, if the prompt seems to be taking too long to finish, or if what is being prompted causes a need for an immediate reply, press g again and wait for the beep.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

214

Infotainment System

. Speak the command naturally, not too fast, not too slow. Use direct commands without a lot of extra words.

. Usually Phone and Audio

commands can be spoken in a single command. For example, “Call Dave Smith at work,” “Play” followed by the artist or song name, or “Tune” followed by the radio station number.

There is no need to memorize specific command words. Direct commands might be more clearly understood by the system. An example of a direct command would be “Call 555-1212.” Examples of these direct commands are displayed on most of the screens while a voice session is active. If “Phone” or “Phone Commands,” is stated, the system understands that a phone call is requested and will respond with questions until enough details are gathered.

If the phone number has been saved with a name and a place, the direct command should include both, for example “Call Dave Smith at work.” Using Voice Recognition for List Options When a list is displayed, a voice prompt will ask to confirm or select an option from that list. A selection can be made by manually selecting the item, or by speaking the line number for the item to select. When a screen contains a list, options may be available but not displayed. The list on a voice recognition screen functions the same as a list on other screens. Scrolling can be used to help display other entries from the list. Manually scrolling or paging the list on a screen during a voice recognition session suspends the current voice recognition event and plays the prompt “Make your selection from the list using the manual controls or press the Back button to try again.”

If manual selection takes more than 15 seconds, the session terminates and prompts that it has timed out. The screen returns back to the screen where voice recognition was initiated.

The Back Command Say “Back” or press the Back button to go to the previous screen. If in voice recognition, and “Back” is stated all the way through to the initial screen, then “Back” is stated one more time, the voice recognition session will cancel.

Help Say “Help” on any voice recognition screen and the help prompt for the screen is played. Additionally, a pop-up displays a text version of the help prompt. Depending on how voice recognition was initiated, the Help pop-up will either display on the instrument cluster or the infotainment screen. Press the Dismiss button to make the pop-up go away.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

Pressing g while the help prompt is playing will terminate the prompt and a beep will be heard. Doing this will stop the help prompt so that a voice command can be used. Voice Recognition for the Radio Select the g screen button to launch audio voice recognition. If the voice button is pressed in a radio screen, the voice commands for radio and media features are available. “Switch to AM” : Switch bands to AM and tune to the last AM radio station. “Switch to FM” : Switch bands to FM and tune to the last FM radio station. “Switch to XM” : Switch bands to SiriusXM (if equipped) and tune to the last SiriusXM channel. “Tune to AM” : Tune to the radio station whose frequency is identified in the command (like “nine fifty”).

“Tune to FM” : Tune to the radio station whose frequency is identified in the command (like “one o one point one”). “Tune to XM ” : Tune to the SiriusXM (if equipped) radio station whose channel number is identified in the command. “Tune to XM ” : Tune to the SiriusXM (if equipped) radio station whose channel name is identified in the command. Voice Recognition for Audio My Media If browsing My Media when the voice button is selected, the voice recognition commands for My Media features are available. “Play Artist” : Begin a dialog to enter a specific Artist name. “Play Artist ” : Begin playback of the media selection identified in the command.

Infotainment System

215

“Play Album” : Begin a dialog to enter a specific album name. “Play Album ” : Begin playback of the identified album name in the command. “Play Song” : Begin a dialog to enter a specific song name. “Play Song ” : Begin playback of the identified song name in the command. “Play Genre” : Begin a dialog to enter a specific genre. “Play Genre ” : Begin playback of the media selection identified in the command. “Play Playlist” : Begin a dialog to enter a specific playlist name. “Play Playlist ” : Begin playback of the identified playlist in the command. “Play ” : Play music from a specific device identified by name. The device name is the name displayed on the screen when the device is first selected as an audio source.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

216

Infotainment System

“Play Chapter” : Begin a dialog to enter a specific name. “Play Chapter ” : Begin playback of the media selection identified in the command. “Play Audiobook” : Begin a dialog to enter a specific name. “Play Audiobook ” : Begin playback of the media selection identified in the command. “Play CD Track ” : Begin playback of the CD at the track identified in the command. “Play Episode” : Begin a dialog to enter a specific name. “Play Episode ” : Begin playback of the media selection identified in the command. “Play Podcast” : Begin a dialog to enter a specific name. “Play Podcast ” : Begin playback of the media selection identified in the command.

“Play Video” : Begin a dialog to enter a specific name. “Play Video

Handling Large Amounts of Media Content It is expected that large amounts of media content will be brought into the vehicle. It may be necessary to handle large amounts of media content in a different way than smaller amounts of media. The system may limit the options of voice recognition by not allowing selection of song titles by voice at the highest level if the number of songs exceeds the maximum limit. Voice command option changes through media content limits are: . Song files including other

individual files of all media types such as audiobook chapters, podcast episodes, and videos.

. Album type folders including

types such as albums and audiobooks.

There are no restrictions if the number of song files and albums is less than 4,000. When the number of song files connected to the system is between 4,000 and 8,000, the content cannot be accessed directly with one command like “Play .” The restriction is that the command “Play Song” must be spoken first; the system will then ask for the song name. The reply command would be to say the name of the song to play. Similar limits exist for album content. If there are more than 4,000 albums, but less than 8,000, the content cannot be accessed directly with one command like, “Play .” The command “Play Album” must first be spoken; the system will then ask for the album name. The reply would be to say the name of the album to play.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

Once the number of songs has exceeded approximately 8,000, there is no support for accessing the songs directly through voice commands. There will still be access to the media content by using commands for playlists, artists, and genres. The access commands for playlists, artists, and genres are prohibited after the number of this type of media exceeds 4,000. The system will provide feedback the first time voice recognition is initiated if it has become apparent that any of these limits are reached during a device initializing process. Voice Recognition for the Phone “Call ” : Initiate a call to an entered contact. The command may include location if the contact has location numbers stored. “Call At Home,” “At Work,” “On Mobile,” or “On Other” : Initiate a call to an entered

contact and location at home, at work, on mobile device, or on another phone. “Call ” : Initiate a call to a standard phone number seven or 10 digits in length, and also 911, 411, or 611. “Pair Phone” : Begins the Bluetooth pairing process. Follow instructions on the radio display. “Switch Phone” : Select a different phone for outgoing calls. “Voice Keypad” : Begins a dialog to enter special numbers like international numbers. The numbers can be entered in groups of digits with each group of digits being repeated back by the system. If the group of digits is not correct, the command “Delete” will remove the last group of digits and allow them to be re-entered. Once the entire number has been entered, the command “Call” will start dialing the number. “Voice Mail” : Initiate a call to voice mail numbers.

Infotainment System

217

Voice Recognition for OnStar (If Equipped) “OnStar” : Begin OnStar Voice Recognition. Bluetooth Speech Recognition (If Equipped) Voice Pass-Thru allows access to the speech recognition commands on the cell phone. See your cell phone manufacturer’s user guide to see if the cell phone supports this feature. Activating this function will start the Bluetooth Speech Recognition on a connected phone. The steering wheel controls are used to operate this function. Press and hold g to activate. A voice session begins so that voice commands can be given to Siri® or many other controls provided by the cell phone. Press @ to exit or press i to close and return to the previous application prior to the start of Voice Pass-Thru.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

218

Infotainment System

Phone

Bluetooth (Overview) Instructions for using the cell phone may differ between infotainment systems. The base radio and base radio with touchscreen instructions are included in this manual. See the infotainment manual for instructions on the uplevel radios. Bluetooth-capable systems can interact with many cell phones, allowing: . Placement and receipt of calls in

a hands-free mode.

. Sharing of the cell phone’s

address book or contact list with the vehicle.

To minimize driver distraction, before driving, and with the vehicle parked: . Become familiar with the

features of the cell phone. Organize the phone book and contact lists clearly and delete

duplicate or rarely used entries. If possible, program speed dial or other shortcuts.

. Review the controls and

operation of the infotainment system.

. Pair cell phone(s) to the vehicle.

The system may not work with all cell phones. See “Pairing” in this section. If the cell phone has voice dialing capability, learn to use that feature to access the address book or contact list.

. See “Deleting a Paired Phone”

and/or “Deleting a Bluetooth Device” in this section. { Warning

When using a cell phone, it can be distracting to look too long or too often at the screen of the phone or the infotainment system. Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.

Vehicles with a Bluetooth system can use a Bluetooth-capable cell phone with a Hands-Free Profile to make and receive phone calls. The infotainment system and voice recognition are used to control the system. The system can be used while in ON/RUN or ACC/ ACCESSORY. The range of the Bluetooth system can be up to 9.1 m (30 ft). Not all phones support all functions and not all phones work with the Bluetooth system. See www.gm.com/bluetooth for more information about compatible phones. Bluetooth Controls Use the buttons on the instrument panel, faceplate, and the steering wheel to operate the Bluetooth system.

Steering Wheel Controls g : Press to answer incoming calls, confirm system information, and start voice recognition.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

i : Press to end a call, reject a call, or cancel an operation. Press to mute or unmute the infotainment system.

Infotainment System Controls For information about how to navigate the menu system using the infotainment controls, see Overview (Base Radio) 0 185 or Overview (Base Radio with Touchscreen) 0 189. MENU : Turn to scroll through a list. Press to select the highlighted list option. { : Press to go to the Home Page. See Home Page (Base Radio) 0 190 or Home Page (Base Radio with Touchscreen) 0 192. PHONE or # : Select to enter the phone main menu. See Bluetooth (Voice Recognition - Base Radio) 0 223 or Bluetooth (Infotainment Controls - Base Radio) 0 219 or Bluetooth (Overview) 0 218 or Bluetooth (Infotainment Controls - Base Radio with Touchscreen) 0 228.

Voice Recognition If equipped, the voice recognition system uses commands to control the system and dial phone numbers. Noise : The system may not recognize voice commands if there is too much background noise, such as noise from open windows or loud talking inside the vehicle. When to Speak : A tone sounds to indicate that the system is ready for a voice command. Wait for the tone and then speak. How to Speak : Speak clearly in a calm and natural voice. Audio System When using the Bluetooth system, sound comes through the vehicle's front audio system speakers and overrides the audio system. Use the O knob during a call to change the volume level. The system maintains a minimum volume level.

Infotainment System

219

Bluetooth Audio Quality Turn off the Echo and Noise cancellation feature on your phone, if supported, for the best hands-free performance. See www.gm.com/bluetooth.

Bluetooth (Infotainment Controls - Base Radio) For information about how to navigate the menu system using the infotainment controls, see Overview (Base Radio) 0 185 or Overview (Base Radio with Touchscreen) 0 189. Switching to Handset or Hands-Free Mode To switch between handset mode and hands-free mode, use the OnStar command, “transfer call.” Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

220

Infotainment System

guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls can be made using OnStar Hands-Free Calling, if available. See OnStar Overview 0 490, if equipped.

Pairing Information . Up to five cell phones can be

paired to the Bluetooth system. . The pairing process is disabled

when the vehicle is moving.

. Pairing only needs to be

completed once per phone, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.

. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were newly paired to the system. To connect

to a different paired phone, see “Connecting to a Different Phone” later in this section.

Pairing a Phone or Device 1. From the Home Page, turn the

MENU knob to access the PHONE screen button, then press the MENU knob to select the PHONE screen button. If a device has been previously paired, the main Phone menu will be shown. If no devices have been paired, Step 2 can be skipped.

2. Turn the MENU knob and

press to select Manage Phones.

3. Press the button just below the PAIR screen button. A four-digit Personal Identification Number (PIN) appears on the display. The PIN is used in Step 5.

4. Start the pairing process on the

cell phone to be paired to the vehicle. See your cell phone manufacturer's user guide for information on this process.

5. Locate the device named “Your

Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN provided in Step 3. If a six digit code is shown on the phone and the vehicle screen, confirm the codes are the same. The system recognizes the new connected phone after the pairing process is complete. If the phone prompts to accept connection or allow phone book download, select Always Accept and Allow. The phone book may not be available if not accepted.

6.

7. Repeat Steps 1–6 to pair

additional phones or devices.

Listing All Paired and Connected Phones 1. To list all paired devices, from

the Home Page turn the MENU knob, then press to select the PHONE screen button.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

2. Turn the MENU knob and

2. Turn the MENU knob and

press to select Manage Phones.

Deleting a Paired Phone 1. From the Home Page, turn the

MENU knob, then press to select the PHONE screen button.

2. Turn the MENU knob and

press to select Manage Phones.

3. Turn the MENU knob to highlight the phone to be deleted.

4. Press the button below the DELETE screen button to delete the highlighted device.

5. A confirmation screen is

displayed. Press the button just below the DELETE screen button to confirm deletion.

Connecting to a Different Phone 1. From the Home Page, turn the

MENU knob, then press to select the PHONE screen button.

press to select Manage Phones.

3. Turn the MENU knob to highlight the phone to be connected.

4. Press the button just below the

CONNECT screen button to connect to the highlighted device.

Phone Menu Once a phone is connected and selected, the following may display: Recent Calls : Turn the MENU knob to highlight Recent Calls and press to select. Contacts : Turn the MENU knob to highlight Contacts and press to select. Keypad : Turn the MENU knob to highlight Keypad and press to select. Active Call : Turn the MENU knob to highlight Active Call and press to select and display the active call screen.

Infotainment System

221

Manage Phones : Turn the MENU knob to highlight Manage Phones and press to select. Making a Call Using Contacts and Recent Calls For cell phones that support the Contacts and Recent Calls feature, the Bluetooth system can use the contacts stored on your cell phone to make calls. See your cell phone manufacturer’s user guide or contact your wireless provider to find out if this feature is supported by your phone. If the phone prompts to allow phone book download during the pairing process, select Always Accept and Allow. The phone book may not be available if not accepted. When a cell phone supports the phone book feature, the Contacts and Recent Calls menus are automatically available. The Contacts menu allows you to access the phone book stored in the cell phone to make a call.

1. From the Home Page, turn the

3. Turn the MENU knob to

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

222

Infotainment System

The Recent Calls menu allows you to access the phone numbers from the Incoming Calls, Outgoing Calls, and Missed Calls menus on the cell phone to make a call. To make a call using the Contacts menu: 1. From the Home Page, turn the

MENU knob, then press to select the PHONE screen button.

MENU knob, then press to select the PHONE screen button.

2. Turn the MENU knob to

highlight Recent Calls and press to select. If necessary, select between Missed, Recent, and Sent calls by pressing the button below the appropriate screen button.

2. Turn the MENU knob to

highlight Contacts and press to select.

3. Turn the MENU knob to

highlight the contact or the phone number.

3. Turn the MENU knob to

highlight the letter group and press to select.

4. Turn the MENU knob to

highlight the contact and press to select.

5. Turn the MENU knob to

highlight the desired number, then press the MENU knob to call the contact.

To make a call using the Recent Calls menu:

4. Press the MENU knob to call

the contact.

Making a Call Using the Keypad To make a call: 1. From the Home Page, turn the

MENU knob, then press to select the PHONE screen button.

2. Turn the MENU knob and

press to select Keypad.

highlight the first digit and press to select. Continue this process through the number. To call, press the button just below the CALL screen button.

Accepting or Declining a Call When an incoming call is received, the infotainment system mutes and a ring tone is heard in the vehicle.

Accepting a Call To accept a call, do one of the following: . Press the button just below the

ANSWER screen button.

. Press g on the steering wheel

controls.

Declining a Call To decline a call, do one of the following: . Press the button just below the

IGNORE screen button.

. Press i on the steering wheel

controls.

. Do nothing.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

. Press i on the steering wheel

controls.

Dual Tone Multi-Frequency (DTMF) Tones The in-vehicle Bluetooth system can send numbers during a call. This is used when calling a menu-driven phone system. 1. When a call is active, press the button just below the KEYPAD screen button.

2. Turn the MENU knob to

highlight the first digit and press to select.

If not initially in the phone application, from the Home Page, turn the MENU knob, then press to select the PHONE screen button. From the PHONE main menu, turn the MENU knob to highlight Active Call and press to select.

Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work.

Accepting a Call Waiting Call To accept a call waiting call, do one of the following: . Press the button just below the

SWITCH screen button.

. Press g on the steering wheel

controls.

Declining a Call Waiting Call To decline a call waiting call, do one of the following: . Press the button just below the

IGNORE screen button.

. Press i on the steering wheel

controls.

. Do nothing. Ending a Call To end a call, do one of the following: . Press the button just below the

END screen button.

Infotainment System

223

Bluetooth (Voice Recognition - Base Radio)

Using Voice Recognition To use voice recognition, press g on the steering wheel. Use the commands below for the various voice features. For additional information, say “Help” while you are in a voice recognition menu. Pairing

Pairing a Phone 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “Pair.” The system

responds with instructions and a four-digit Personal Identification Number (PIN). The PIN is used in Step 5.

4. Start the pairing process on the

cell phone that you want to pair. For help with this process, see your cell phone manufacturer's user guide.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

224

Infotainment System

5. Locate the device named “Your

Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN provided in Step 3. The system may respond with a six digit code to be confirmed on the cell phone (instead of entering a four digit code), check that the same digits are shown on the cell phone and say "Yes" to confirm. Select Confirm on the cell phone as well. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone. This name will be used to indicate which phones are paired and connected to the vehicle. The system responds with “ has been successfully paired” after the pairing process is complete.

6. Repeat Steps 1−5 to pair

additional phones.

Listing All Paired and Connected Phones The system can list all cell phones paired to it. If a paired cell phone is also connected to the vehicle, the system responds with “is connected” after that phone name. 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “List.”

Deleting a Paired Phone If the phone name to delete is unknown, see “Listing All Paired and Connected Phones.” 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “Delete.” The system asks

for which phone to delete.

4. Say the name of the phone to

delete.

Connecting to a Different Phone To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all available cell phones were paired. This may need to be repeated depending on how many cell phones have been connected. 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “Change phone.”

If another cell phone is found, the response will be “ is now connected.” This can be repeated to connect any of the up to five paired phones. If another cell phone is not found, the original phone remains connected.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

Storing and Deleting Phone Numbers The following commands are used to delete and store phone numbers. Store : This command will store a phone number, or a group of numbers as a name tag. Digit Store : This command allows a phone number to be stored as a name tag by entering the digits one at a time. Delete : This command is used to delete individual name tags. Delete All Name Tags : This command deletes all stored name tags in the Hands-Free Calling Directory and the Destinations Directory. Using the “Store” Command 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Store.” 3. Say the entire phone number or a group of digits all at once with no pauses, then follow the

directions given by the system to save a name tag for this number.

Using the “Digit Store” Command If an unwanted number is recognized by the system, say “Correction” at any time to clear the last number. To hear all of the digits recognized by the system, say “Verify” at any time. 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Digit Store.” 3. Say each digit, one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Store,” and then follow the directions given by the system to save a name tag for this number.

Using the “Delete” Command 1. Press g. The system responds

“Ready,” followed by a tone.

Infotainment System

225

2. Say “Delete.” 3. Say the name tag you want to

delete.

Using the “Delete All Name Tags” Command This command deletes all stored name tags in the Hands-Free Calling Directory and the Destinations Directory. To delete all name tags: 1. Press g. The system responds

“Ready,” followed by a tone. 2. Say “Delete all name tags.” Listing Stored Numbers The list command will list all the stored numbers and name tags. Using the “List” Command 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Directory.” 3. Say “Hands-Free Calling.” 4. Say “List.”

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

226

Infotainment System

Making a Call Calls can be made using the following commands. Dial or Call : The dial or call command can be used interchangeably to dial a phone number or a stored name tag. Digit Dial : This command allows a phone number to be dialed by entering the digits one at a time. Re-dial : This command is used to dial the last number used on the cell phone. Using the “Dial” or “Call” Command 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Dial” or “Call.” 3. Say the entire number without pausing or say the name tag. Once connected, the person called will be heard through the audio speakers.

Calling 911 Emergency (U.S. and Canada) 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Dial” or “Call.” 3. Say “911.” 4. Say “Dial” or “Call.”

Calling 066 Emergency (Mexico) 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Dial” or “Call.” 3. Say “066.” 4. Say “Dial” or “Call.” Using the “Digit Dial” Command The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. If an unwanted number is recognized by the system, say “Correction” at any time to clear the last number.

To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Digit Dial.” 3. Say each digit, one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Dial.”

Once connected, the person called will be heard through the audio speakers. Using the “Re-dial” Command 1. Press g. The system responds

“Ready,” followed by a tone. 2. After the tone, say “Re-dial.”

The system dials the last number called from the connected cell phone.

Once connected, the person called will be heard through the audio speakers.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. . Press g to answer the call. . Press i to ignore a call. Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . Press g to answer an incoming call when another call is active. The original call is placed on hold.

. Press g again to return to the

original call.

. To ignore the incoming call, no

action is required.

. Press i to disconnect the

current call and switch to the call on hold.

Three-Way Calling Three-way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press g. 2. Say “Three-way call.” 3. Use the “Dial” or “Call”

command to dial the number of the third party to be called. 4. Once the call is connected,

press g to link all callers together.

Ending a Call Press i to end a call. Transferring a Call Audio can be transferred between the Bluetooth system and the cell phone. The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN.

Infotainment System

227

To Transfer Audio from the Bluetooth System to a Cell Phone During a call with the audio in the vehicle: 1. Press g. 2. Say “Transfer Call.”

To Transfer Audio to the Bluetooth System from a Cell Phone During a call with the audio on the cell phone, press g. The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information. Voice Pass-Thru Voice pass-thru allows access to the voice recognition commands on the cell phone. See your cell phone manufacturer's user guide to see if the cell phone supports this feature. To access contacts stored in the cell phone:

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

228

Infotainment System

1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “Voice.” The system responds “OK, accessing .”

The cell phone's normal prompt messages will go through their cycle according to the phone's operating instructions. Dual Tone Multi-Frequency (DTMF) Tones The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu-driven phone system. Account numbers can also be stored for use.

Sending a Number or Name Tag During a Call 1. Press g. The system responds

“Ready,” followed by a tone.

2. Say “Dial.” 3. Say the number or name tag

to send.

Clearing the System Unless information is deleted out of the in-vehicle Bluetooth system, it will be retained indefinitely. This includes all phone pairing information. For information on how to delete this information, see “Deleting a Paired Phone.”

Bluetooth (Infotainment Controls - Base Radio with Touchscreen) To use infotainment controls to access the menu system, see Overview (Base Radio) 0 185 or Overview (Base Radio with Touchscreen) 0 189. Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be

made using OnStar Hands-Free Calling, if available. See OnStar Overview 0 490.

Pairing Information . A Bluetooth phone with MP3
capability cannot be paired to the vehicle as a phone and an MP3 player at the same time. . Up to 10 cell phones can be

paired to the Bluetooth system. . The pairing process is disabled

when the vehicle is moving.

. Pairing only needs to be

completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.

. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system.

Chevrolet Silverado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9159338) - 2016 - crc - 7/24/15

When the Bluetooth device and infotainment system are successfully paired, the phone book is downloaded automatically. This is dependent on the type of the phone paired. If the automatic download does not occur, proceed with the phone book download on the phone.

Pairing a Phone - SSP and No Paired Device When there is no paired device on the infotainment system and Simple Secure Pairing (SSP) is supported: 1. Press {.