2014 Chevrolet Equinox Owners Manual

settings. Select Yes or On.

Instruments and Controls

5-37

Universal Remote System See Radio Frequency Statement on page 13-15.

Universal Remote System Programming

If equipped, these buttons are in the overhead console. This system can replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. These instructions refer to a garage door opener, but can be used for other devices.

Do not use the Universal Remote system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read these instructions completely before programming the Universal Remote system. It may help to have another person assist with the programming process. Keep the original hand-held transmitter for use in other vehicles as well as for future programming. Erase the programming when vehicle ownership is terminated. See “Erasing Universal Remote System Buttons” later in this section. To program a garage door opener, park outside directly in line with and facing the garage door opener receiver. Clear all people and objects near the garage door.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (38,1)

5-38

Instruments and Controls

Make sure the hand-held transmitter has a new battery for quick and accurate transmission of the radio-frequency signal. Programming the Universal Remote System For questions or help programming the Universal Remote system, call 1-800-355-3515 or see www.homelink.com. Programming involves time-sensitive actions, and may time out causing the procedure to be repeated. To program up to three devices: 1. Hold the end of the hand-held

transmitter about 3 to 8 cm (1 to 3 in) away from the Universal Remote system buttons with the indicator light in view. The hand-held transmitter was supplied by the manufacturer of the garage door opener receiver.

2. At the same time, press and

hold both the hand-held transmitter button and one of the three Universal Remote system buttons to be used to operate the garage door. Do not release either button until the indicator light changes from a slow to a rapid flash. Then release both buttons. Some garage door openers may require substitution of Step 2
with the procedure under “Radio Signals for Canada and Some Gate Operators” later in this section.

3. Press and hold the newly

programmed Universal Remote system button for five seconds while watching the indicator light and garage door activation.

If the indicator light stays on continuously or the garage door moves when the button is pressed, then

programming is complete. There is no need to complete Steps 4–6. If the indicator light does not come on or the garage door does not move, a second button press may be required. For a second time, press and hold the newly programmed button for five seconds. If the light stays on or the garage door moves, programming is complete. If the indicator light blinks rapidly for two seconds, then changes to a solid light and the garage door does not move, continue with programming Steps 4–6.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (39,1)

Instruments and Controls

5-39

enough for the Universal Remote system to pick up the signal during programming. If the programming did not work, replace Step 2 under “Programming the Universal Remote System” with the following: Press and hold the Universal Remote system button while pressing and releasing the hand-held transmitter button every two seconds until the signal has been successfully accepted by the Universal Remote system. The Universal Remote system indicator light will flash slowly at first and then rapidly. Proceed with Step 3 under “Programming the Universal Remote System” to complete.

does not flash, press and hold the same button a second time for two seconds, then release it. Again, if the door does not move or the garage door lamp does not flash, press and hold the same button a third time for two seconds, then release it.

The Universal Remote system should now activate the garage door. Repeat the process for programming the two remaining buttons. Radio Signals for Canada and Some Gate Operators For questions or programming help call 1-800-355-3515 or see www.homelink.com. Canadian radio-frequency laws and some U.S. gate operators require transmitter signals to time out or quit after several seconds of transmission. This may not be long

Learn or Smart Button

4. After completing Steps 1–3 ,

locate the Learn or Smart button inside garage on the garage door opener receiver. The name and color of the button may vary by manufacturer.

5. Press and release the Learn or

6.

Smart button. Step 6 must be completed within 30 seconds of pressing this button. Inside the vehicle, press and hold the newly programmed Universal Remote system button for two seconds and then release it. If the garage door does not move or the lamp on the garage door opener receiver

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (40,1)

5-40

Instruments and Controls

Reprogramming a Single Universal Remote System Button To reprogram any of the system buttons: 1. Press and hold any one of the

buttons. Do not release the button.

2. The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 under “Programming the Universal Remote System.”

Universal Remote System Operation

Using the Universal Remote System Press and hold the appropriate Universal Remote system button for at least one-half second. The indicator light will come on while the signal is being transmitted. Erasing Universal Remote System Buttons Erase all programmed buttons when vehicle ownership is terminated. To erase: 1. Press and hold the two outside buttons until the indicator light begins to flash. This should take about 10 seconds.

2. Release both buttons.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (1,1)

Lighting

Exterior Lighting

Exterior Lighting

Exterior Lamp Controls

Exterior Lamp Controls . . . . . . . . 6-1
Headlamp High/Low-Beam

Changer . . . . . . . . . . . . . . . . . . . . . 6-1
Flash-to-Pass . . . . . . . . . . . . . . . . . 6-2
Daytime Running

Lamps (DRL) . . . . . . . . . . . . . . . . 6-2

Automatic Headlamp

System . . . . . . . . . . . . . . . . . . . . . . 6-2
Hazard Warning Flashers . . . . . 6-3
Turn and Lane-Change

Signals . . . . . . . . . . . . . . . . . . . . . . 6-3
Fog Lamps . . . . . . . . . . . . . . . . . . . . 6-3

Interior Lighting

Instrument Panel Illumination

Control . . . . . . . . . . . . . . . . . . . . . . 6-4
Dome Lamps . . . . . . . . . . . . . . . . . 6-4
Reading Lamps . . . . . . . . . . . . . . . 6-4

Lighting Features

Entry Lighting . . . . . . . . . . . . . . . . . 6-5
Battery Load Management . . . . 6-5

The exterior lamp control is on the turn signal lever. There are four positions. O (Exterior Lamp Control): Operates the exterior lamps. Turn to one of the following positions: O (Off): Briefly turn to this position to turn the automatic light control off or on again. AUTO (Automatic Headlamps): Turns the exterior lamps on and off automatically depending on the exterior light. The vehicle will default to the AUTO setting when it is first started.

Lighting

6-1

; (Parking Lamps): Turns on the parking lamps including all lamps, except the headlamps. 5 (Headlamps): Turns on the headlamps, together with the parking lamps and instrument panel lights.

Headlamp High/ Low-Beam Changer 2 3 Headlamp High/Low-Beam Changer: Push the turn signal lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release.

This indicator light turns on in the instrument cluster when the high-beam headlamps are on.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (2,1)

6-2

Lighting

Flash-to-Pass The flash-to-pass feature works with the low beams or Daytime Running Lamps (DRL) on or off. To flash the high beams, pull the turn signal lever all the way toward you, then release it.

Daytime Running Lamps (DRL) The DRL system makes the low-beam headlamps come on at a reduced brightness in daylight when the following conditions are met:

The ignition is on. The exterior lamp control is in AUTO. The transmission is not in P (Park). The light sensor determines it is daytime. The parking brake is released.

Fully functional DRL are required on all vehicles first sold in Canada.

When the DRL are on the taillamps, sidemarker, instrument panel lights and other lamps will not be on. The instrument cluster will be lit. When the exterior lamp control is turned to 5, the low-beam headlamps come on. The other lamps that come on with the headlamps will also come on. To idle your vehicle with the DRL off, move the shift lever to P (Park). The DRL will stay off until the shift lever is moved out of the P (Park) position. The regular headlamp system should be turned on when needed.

Automatic Headlamp System When it is dark enough outside, the headlamps come on automatically.

Do not cover the light sensor on top of the instrument panel or the headlamps will come on when they are not needed. The system may also turn on the headlamps when driving through a parking garage or tunnel. Lights On with Wipers If the windshield wipers are activated in daylight with the engine on, and the exterior lamp control is in AUTO, the headlamps, parking lamps, and other exterior lamps come on. The transition time for the lamps coming on varies based on wiper speed. When the wipers are

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (3,1)

not operating, these lamps turn off. Move the exterior lamp control to P or ; to disable this feature.

Hazard Warning Flashers

Turn and Lane-Change Signals

Lighting

6-3

Have any burned out bulbs replaced. If a bulb is not burned out, check the fuse; see Fuses on page 10-32.

Fog Lamps

Move the lever all the way up or down to signal a turn. An arrow on the instrument cluster will flash in the direction of the turn or lane change. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. If the lever is briefly pressed and released, the turn signal flashes three times. The lever returns to its starting position when it is released. If after signaling a turn or a lane change the arrows flash rapidly or do not come on, a signal bulb may be burned out.

For vehicles with fog lamps, the control is located on the turn signal lever. Use the fog lamps for better vision in foggy or misty conditions. # FOG (Fog Lamps): Turn the fog lamp band on the lever to # and release it, to turn the fog lamps on or off. The band will return to its original position. The parking lamps or low-beam headlamps must be on to use the fog lamps.

| (Hazard Warning Flasher): Press this button, on the center of the instrument panel, to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press | again to turn the flashers off.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (4,1)

6-4

Lighting

The fog lamps will go off whenever the high-beam headlamps are turned on. When the high-beam headlamps are turned off, the fog lamps will come on again. Some localities have laws that require the headlamps to be on along with the fog lamps.

+ (On): Turns the dome lamps on. The dome lamps can also be turned on and off by pressing the buttons next to the lamps.

Reading Lamps The reading lamps are located on the overhead console. These lamps come on automatically when any door is opened. For manual operation, press the button next to each lamp to turn it on or off.

Interior Lighting

Instrument Panel Illumination Control This control is located on the instrument panel, to the left of the steering column. D (Instrument Panel Brightness): Turn clockwise or counterclockwise to brighten or dim the lights.

Dome Lamps There are front and rear dome lamps. The dome lamp controls are located in the overhead console. To change the settings, press the following: * (Dome Lamp Override): Turns the lamps off, even when a door is open. 1 (Door): The lamps come on automatically when a door is opened.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (5,1)

Lighting

6-5

EPM works to prevent excessive discharge of the battery. It does this by balancing the generator's output and the vehicle's electrical needs. It can increase engine idle speed to generate more power whenever needed. It can temporarily reduce the power demands of some accessories. Normally, these actions occur in steps or levels, without being noticeable. In rare cases at the highest levels of corrective action, this action may be noticeable to the driver. If so, a DIC message might be displayed and it is recommended that the driver reduce the electrical loads as much as possible. See Battery Voltage and Charging Messages on page 5-27.

Lighting Features

Entry Lighting The dome lamp, cargo lamp, and foot lamp inside the vehicle come on when any door is opened, if the dome lamp is in the door position. In addition, these lamps come on when the Remote Keyless Entry (RKE) unlock button is pressed. They stay on for 20 seconds or until a door is opened. After the door is opened and then closed, the light remains on for 20 seconds, or until the ignition is turned to ON/RUN.

Battery Load Management The vehicle has Electric Power Management (EPM) that estimates the battery's temperature and state of charge. It then adjusts the voltage for best performance and extended life of the battery.

When the battery's state of charge is low, the voltage is raised slightly to quickly bring the charge back up. When the state of charge is high, the voltage is lowered slightly to prevent overcharging. If the vehicle has a voltmeter gauge or a voltage display on the Driver Information Center (DIC), you may see the voltage move up or down. This is normal. If there is a problem, an alert will be displayed. The battery can be discharged at idle if the electrical loads are very high. This is true for all vehicles. This is because the generator (alternator) may not be spinning fast enough at idle to produce all of the power needed for very high electrical loads. A high electrical load occurs when several of the following are on, such as: headlamps, high beams, fog lamps, rear window defogger, climate control fan at high speed, heated seats, engine cooling fans, trailer loads, and loads plugged into accessory power outlets.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (6,1)

6-6

Lighting

2 NOTES

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (1,1)

Phone

Bluetooth (Overview) . . . . . . . . 7-22
Bluetooth (Infotainment

Controls) . . . . . . . . . . . . . . . . . . . 7-23

Bluetooth (Voice

Recognition) . . . . . . . . . . . . . . . 7-27

Trademarks and License Agreements

Trademarks and License

Agreements . . . . . . . . . . . . . . . . 7-33

Infotainment System

Introduction

Infotainment . . . . . . . . . . . . . . . . . . . 7-1
Theft-Deterrent Feature . . . . . . . 7-2
Overview . . . . . . . . . . . . . . . . . . . . . . 7-3
Operation . . . . . . . . . . . . . . . . . . . . . 7-4

Radio

AM-FM Radio . . . . . . . . . . . . . . . . . 7-7
Satellite Radio . . . . . . . . . . . . . . . . 7-9
Radio Reception . . . . . . . . . . . . . 7-12
Multi-Band Antenna . . . . . . . . . . 7-13

Audio Players

CD Player . . . . . . . . . . . . . . . . . . . 7-13
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . 7-16
Auxiliary Devices . . . . . . . . . . . . 7-17

Infotainment System 7-1

Introduction

Infotainment Read the following pages to become familiar with the audio system's features.

{ Warning

Taking your eyes off the road for extended periods could cause a crash resulting in injury or death to you or others. Do not give extended attention to infotainment tasks while driving.

This system provides access to many audio and non-audio listings. To minimize taking your eyes off the road while driving, do the following while the vehicle is parked: . Become familiar with the

operation and controls of the audio system.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (2,1)

Theft-Deterrent Feature The theft-deterrent feature works by learning a portion of the Vehicle Identification Number (VIN) to the infotainment system. The infotainment system does not operate if it is stolen or moved to a different vehicle.

7-2

Infotainment System

. Set up the tone, speaker

adjustments, and preset radio stations.

For more information, see Defensive Driving on page 9-3. This vehicle's infotainment system may be equipped with a noise reduction system which can work improperly if the audio amplifier, engine calibrations, exhaust system, microphones, radio, or speakers are modified or replaced. This could result in more noticeable engine noise at certain speeds.

{ Caution

Contact your dealer before adding any equipment. Adding audio or communication equipment could interfere with the operation of the engine, radio, or other systems, and could damage them. Follow federal rules covering mobile radio and telephone equipment.

The vehicle has Retained Accessory Power (RAP). With RAP, the audio system can be played even after the ignition is turned off. See Retained Accessory Power (RAP) on page 9-22 for more information. Navigation System For vehicles with a navigation system, see the infotainment manual.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (3,1)

Overview

Infotainment System 7-3

INFO (Information)

1. VOL/ O (Volume/Power) 2. g SEEK 3. FAV (Favorite Pages) 4. RADIO/BAND 5. Preset Buttons 1–6
6. AUX (Auxiliary) 7. E BACK 8. 9. MENU/SEL (Menu/Select) 10. k (Play/Pause) 11. CD Player 12. 5 / ? (Phone/Mute) 13. l SEEK 14. H (Clock) 15. CONFIG (Configuration Menu) 16. X (CD Eject) 17. TONE

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (4,1)

7-4

Infotainment System

Operation

Controls The infotainment system is operated by using the pushbuttons, multifunction knobs, display menus, and steering wheel controls, if equipped. Turning the System On or Off VOL/ O (Volume/Power): Press to turn the system on and off.

Automatic Switch-Off If the infotainment system has been turned on after the ignition is turned off, the system will turn off automatically after 10 minutes. Volume Control VOL/ O (Volume/Power): Turn to adjust the volume.

5 / ? (Mute): For vehicles with OnStar, press and hold 5 / ? to mute the infotainment system. Press and hold 5 / ? again, or turn the VOL/ O knob to cancel mute. For vehicles without OnStar, press 5 / ? to mute the infotainment system. Press 5 / ? again, or turn the VOL/ O knob to cancel mute. Menu System

Controls The MENU/SEL knob and the E BACK button are used to navigate the menu system. MENU/SEL (Menu/Select): Press to: . Enter the menu system. . Select or activate the highlighted

menu option.

. Confirm a set value.

Turn a system setting on or off.

Turn to: . Highlight a menu option. . Select a value. E BACK: Press to: . Exit a menu. . Return from a submenu screen

to the previous menu screen. . Delete the last character in a

sequence.

RADIO/BAND: Press to: . Displays menu of AM, FM, XM,

CD, or AUX.

. Press to toggle through menu.

Selecting a Menu Option

1. Turn the MENU/SEL knob to

move the highlighted bar.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (5,1)

2. Press the MENU/SEL button to

Setting a Value

Entering a Character Sequence

select the highlighted option.

Submenus

Infotainment System 7-5

An arrow on the right-hand edge of the menu indicates that it has a submenu with other options.

Activating a Setting

confirm the setting.

Turning a Function On or Off

1. Turn the MENU/SEL knob to

1. Turn the MENU/SEL knob to

change the current value of the setting.

highlight the character.

2. Press the MENU/SEL button to

2. Press the MENU/SEL button to

select the character.

1. Turn the MENU/SEL knob to

highlight the setting.

2. Press the MENU/SEL button to

activate the setting.

1. Turn the MENU/SEL knob to

highlight the function.

2. Press the MENU/SEL button to

turn the function on or off.

Press the E BACK button to delete the last character in the sequence or press and hold to delete the entire character sequence. Audio Settings The audio settings can be set for each radio band and each audio player source. To quickly reset an audio setting value to 0: 1. Press the TONE button. 2. Select the audio setting.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (6,1)

7-6

Infotainment System

3. Press and hold the MENU/SEL button until the value changes to 0.

Press the E BACK button to go back to the Tone Settings menu.

Adjusting the Treble, Midrange, and Bass

1. Press the TONE button. 2. Select Treble, Midrange,

or Bass.

3. Select the value. Press the E BACK button to go back to the Tone Settings menu.

Adjusting the Fader and Balance

1. Press the TONE button. 2. Select Fader or Balance. 3. Select the value. Press the E BACK button to go back to the Tone Settings menu.

Adjusting the EQ (Equalizer) For vehicles that have an equalizer:

1. Press the TONE button. 2. Select EQ.

3. Select the setting. Press the E BACK button to go back to the Tone Settings menu. System Settings

Configuring the Number of Favorite Pages

To configure the number of available favorite pages: 1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Radio Favorites. 4. Select the number of available

favorite pages.

5. Press the E BACK button to

go back to the System Configuration menu.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (7,1)

Maximum Startup Volume The maximum volume played when the radio is first turned on can be set.

Auto Volume The auto volume feature automatically adjusts the radio volume to compensate for road and wind noise as the vehicle speeds up or slows down, so that the volume level is consistent. The level of volume compensation can be selected, or the auto volume feature can be turned off.

1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Max Startup Volume. 4. Select the setting. 5. Press the E BACK button to

go back to the System Configuration menu.

1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Auto Volume. 4. Select the setting. 5. Press the E BACK button to

go back to the System Configuration menu.

Infotainment System 7-7

Radio

AM-FM Radio

Control Buttons The buttons used to control the radio are: RADIO/BAND: Press to turn the radio on and choose between AM, FM, SiriusXM®, if equipped, CD, or AUX. MENU/SEL: Turn to manually search for stations. FAV: Press to open the favorites list. l SEEK or g SEEK: Press to search for stations. Press and hold to scan for stations. k : Press to pause the CD. 1 to 6: Press to select preset stations.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (8,1)

7-8

Infotainment System

RDS (Radio Data System) The radio may have RDS. The RDS feature is available for use only on FM stations that broadcast RDS information. This feature only works when the information from the radio station is available. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly. If this happens, contact the radio station. While the radio is tuned to an FM-RDS station, the station name or call letters display. Radio Menus Radio menus are available for AM and FM. Press the MENU/SEL knob to open the main radio menu for that band. Selecting a Band Press the RADIO/BAND button to choose AM, FM, or SiriusXM, if equipped. The last station that was playing starts playing again.

Selecting a Station

Seek Tuning If the radio station is not known: Briefly press g SEEK or l SEEK, to automatically search for the next available station. If a station is not found, the radio switches to a more sensitive search level. If a station still is not found, the frequency that was last active begins to play. If the radio station is known: Press and hold g SEEK or l SEEK until the station on the display is reached, then release the button.

Manual Tuning Turn the MENU/SEL knob to select the frequency on the display.

Favorites List 1. Press the MENU/SEL knob. 2. Select Favorites List. 3. Select the station.

Station Lists 1. Press the MENU/SEL knob. 2. Select AM Station List or FM

Station List. All receivable stations in the current reception area are displayed. If a station list has not been created, an automatic station search is done.

3. Select the station.

Category Lists Most stations that broadcast an RDS program type code specify the type of programming transmitted. Some stations change the program type code depending on the content. The system stores the RDS stations sorted by program type in the FM category list. To search for a programming type determined by station: 1. Press the MENU/SEL knob. 2. Select FM Category List. A list of all programming types available displays.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (9,1)

3. Select the programming type. A list of stations that transmit programming of the selected type displays.

4. Select the station.

The category lists are updated when the station lists are updated.

Updating Station & Category Lists If stations stored in the station list can no longer be received: 1. Press the MENU/SEL knob. 2. Select Update AM Station List or

Update FM Station List, if the stations stored in the station list are no longer received. A station search will be completed and the first station in the updated list will play.

To cancel the station search, press the MENU/SEL knob.

Storing a Station as a Favorite Stations from all bands can be stored in any order in the favorite pages. Up to six stations can be stored in each favorite page and the number of available favorite pages can be set.

Storing a Station as a Favorite To store the station to a position in the list, press the corresponding button 1 to 6 until a beep is heard.

Retrieving Stations Press the FAV button to open a favorite page or to switch to another favorite page. Briefly press one of the 1 to 6 buttons to retrieve the station.

Infotainment System 7-9

Satellite Radio Vehicles with an SiriusXM® Satellite Radio tuner and a valid SiriusXM Satellite Radio subscription can receive SiriusXM programming. SiriusXM Satellite Radio Service SiriusXM is a satellite radio service based in the 48 contiguous United States and 10 Canadian provinces. SiriusXM Satellite Radio has a wide variety of programming and commercial-free music, coast to coast, and in digital-quality sound. If SiriusXM service needs to be reactivated, the radio will display “No Subscription Please Renew on channel XM1.” A service fee is required to receive the SiriusXM service. For more information, contact SiriusXM at www.siriusxm.com or 1-866-635-2349 (U.S.), and www.xmradio.ca or 1-877-209-0079
(Canada).

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (10,1)

7-10

Infotainment System

Control Buttons The buttons used to control the SiriusXM radio are: RADIO/BAND: Press to turn the radio on and choose between AM, FM, and SiriusXM, if equipped. g SEEK or l SEEK: Press to go to the previous or next station. FAV: Press to open the favorites list. 1 to 6: Press to select preset stations. MENU/SEL: Turn to select stations. Press to open the SiriusXM Satellite Radio menu. Selecting the SiriusXM Band Press the RADIO/BAND button to choose between the AM, FM, and SiriusXM bands. The last channel played in that band begins to play when that band is selected.

Removing or Adding Categories SiriusXM channels are organized in categories. Channels in a category that have been removed can still be accessed by using the g SEEK or l SEEK buttons, or the MENU/SEL knob. To add or remove categories: 1. Press the CONFIG button. 2. Select Radio Settings. 3. Select XM Categories. 4. Turn the MENU/SEL knob to

highlight the category.

5. Press the MENU/SEL knob to

remove or add the category.

Selecting a SiriusXM Channel SiriusXM channels can be selected by using g SEEK, l SEEK, the MENU/SEL knob, or the menu system.

Selecting a Channel Using g SEEK or l SEEK . Press and release g SEEK or l SEEK to go to the previous or next channel.

. Press and hold g SEEK or l

SEEK to scroll through the previous or next channel until the channel is reached.

Selecting a Channel Using the MENU/SEL Knob To select an XM channel using the MENU/SEL knob: Turn the MENU/SEL knob to highlight an XM channel. The channel is selected after a short delay. To select a channel using the menu: 1. Turn the MENU/SEL knob and

select XM Channel List.

2. Select the desired channel.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (11,1)

Selecting a Channel Using the Menu System 1. Turn the MENU/SEL knob. 2. Select XM Category List. 3. Select the category. 4. Select the channel.

Storing a SiriusXM Channel as a Favorite Channels from all bands can be stored in any order in the favorite pages. Up to six channels can be stored in each favorite page and the number of available favorite pages can be set.

Storing a Channel as a Favorite To store the channel to a position in the list, press and hold the corresponding 1 to 6 button until the channel can be heard again.

Retrieving Channels Press the FAV button to open a favorite page or to change to another favorite page. Briefly press one of the 1 to 6 buttons to retrieve the channel.

Turning SiriusXM Channel Graphics On or Off 1. From the Home Page press the

Config screen button or the CONFIG button on the faceplate.

2. Select Radio Settings from the

Config Menu list.

3. Select XM Channel Graphics to

turn on or off.

SiriusXM Messages XL (Explicit Language Channels): These channels, or any others, can be blocked by request, by calling 1-866-635-2349 (U.S.) or 1-877-209-0079 (Canada).

Infotainment System 7-11

XM Updating: The encryption code in the receiver is being updated, no action is required. This process should take no longer than 30 seconds. Loading XM: The audio system is acquiring and processing audio and text data; no action is needed. This message should disappear shortly. Channel Off Air: This channel is not currently in service. Tune in to another channel. Channel Unauthorized: This channel is blocked or cannot be received with your SiriusXM subscription package. Channel Unavailable: This previously assigned channel is no longer assigned. Tune to another station. No Artist Info: The system is working properly. No artist information is available at this time on this channel.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (12,1)

7-12

Infotainment System

No Title Info: The system is working properly. No song title information is available at this time on this channel. No CAT Info: The system is working properly. No category information is available at this time on this channel. No Information: The system is working properly. No text or informational messages are available at this time on this channel. No Subscription Please Renew: The SiriusXM subscription needs to be reactivated. contact SiriusXM at www.siriusxm.com or 1-866-635-2349 (U.S.), and www.xmradio.ca or 1-877-209-0079
(Canada). No XM Signal: The system is working properly. The vehicle may be in a location where the XM signal is being blocked. When the vehicle is moved into an open area, the signal should return.

If tuned to channel 0,

If this message is

CAT Not Found: The system is working properly. There are no channels available for the selected category. XM Radio ID: this message alternates with the SiriusXM Radio eight-digit radio ID label. This label is needed to activate the service. Unknown: received when tuned to channel 0, there could be a receiver fault. Consult with your dealer. Check Antenna: does not clear within a short period of time, the receiver could have a fault. Consult with your dealer. XM Not Available: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer. See the infotainment manual.

If this message

Radio Reception Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet. FM FM signals only reach about 16 to 65 km (10 to 40 mi). Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially around tall buildings or hills, causing the sound to fade in and out. AM The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. Static can occur when

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (13,1)

Multi-Band Antenna The multi-band antenna is on the roof of the vehicle. The antenna is used for the AM-FM radio, OnStar, the SiriusXM Satellite Radio Service System, and GPS (Global Positioning System), if the vehicle has these features. Keep the antenna clear of obstructions for clear reception. If the vehicle has a sunroof, and it is open, reception can also be affected.

things like storms and power lines interfere with radio reception. When this happens, try reducing the treble on the radio. SiriusXM Satellite Radio Service SiriusXM Satellite Radio Service gives digital radio reception from coast to coast in the 48 contiguous United States, and in Canada. Just as with FM, tall buildings or hills can interfere with satellite radio signals, causing the sound to fade in and out. In addition, traveling or standing under heavy foliage, bridges, garages, or tunnels may cause loss of the SiriusXM signal for a period of time. Cellular Phone Usage Cellular phone usage can cause interference with the vehicle's radio.

Infotainment System 7-13

Audio Players

CD Player See the infotainment manual for more information. The player can be used for CD and MP3 audio. With the vehicle on, insert a disc into the slot, label side up. The player pulls it in and begins playing. While playing, the navigation system is available. The system is capable of playing: . Most audio CDs . CD-R . CD-RW . MP3 or unprotected WMA

formats

When playing any compatible recordable disc, the sound quality can be reduced due to disc quality, the method of recording, the quality

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (14,1)

7-14

Infotainment System

of the music that has been recorded, or the way the disc has been handled. There can be increased skipping, difficulty in recording tracks, difficulty in finding tracks, and/or difficulty in loading and ejecting. If these problems occur, check the disc for damage or try a known good disc. To avoid damage to the CD player: . Do not use scratched or

damaged discs.

. Do not apply labels to discs. The

labels could get caught in the player. Insert only one disc at a time.

. Keep the loading slot free of foreign materials, liquids, and debris.

. Use a marking pen to label the

top of the disc.

Loading and Ejecting Discs To load a disc: 1. Turn the vehicle on. 2.

Insert a disc into the slot, label side up. The player pulls it in the rest of the way. If the disc is damaged or improperly loaded, there is an error and the disc ejects.

The disc automatically plays once loaded. Press X to eject a disc from the CD player. If the disc is not removed within a short period of time, it is automatically pulled back into the player.

Control Buttons The buttons used to control the CD player are: CD: Press to choose between the CD and AUX player. l SEEK or g SEEK: Press to select tracks or to fast forward or rewind within a track.

INFO: Press to display additional information about the CD that may be available. MENU/SEL: Turn to select tracks. X (Eject): Press to remove the CD. k : Press to pause a CD or MP3
track; press again to resume playback.

Playing an Audio CD Press the CD button. If there is a disc in the player it begins playing. Information about the disc and current track is shown on the display depending on the data stored.

Selecting a CD Track Using the control buttons: . Press g SEEK or l SEEK to select the previous or next track. Turn the MENU/SEL knob.

Using the CD Menu: 1. Press the MENU/SEL knob.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (15,1)

Infotainment System 7-15

2. Select Track List. 3. Select the track.

Playing Tracks in Random Order Press the MENU/SEL knob and then set Shuffle Songs to On.

Fast Forward and Rewind Press and hold l SEEK or g SEEK to fast forward or rewind within the current track.

Selecting an MP3 Track Using the control buttons: . Press g SEEK or l SEEK to select the previous or next track. Turn the MENU/SEL knob.

Using the CD Menu: 1. Press the MENU/SEL knob. 2. Select Playlists/Folders. 3. Select the playlist or folder. 4. Select the track.

Searching for MP3 Tracks The search feature may take some time to display the information after reading the disc due to the amount of information stored on the disc. FM automatically plays while the disc is being read. Tracks can be searched by: . Playlists . Artists . Albums . Song Titles . Genres

Folder View

To search for tracks: 1. Press the MENU/SEL knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Genres, or Folder View. 4. Select the track.

Error Messages If Disc Error displays and/or the disc comes out, it could be for one of the following reasons:

The disc has an invalid or unknown format. The disc is very hot. Try the disc again when the temperature returns to normal. The road is very rough. Try the disc again when the road is smoother. The disc is dirty, scratched, wet, or upside down. The air is very humid. Try the disc again later. There was a problem while burning the disc. The label is caught in the CD player.

If the CD is not playing correctly, for any other reason, try a known good CD.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (16,1)

7-16

Infotainment System

If any error continues, contact your dealer.

MP3

Playing an MP3 CD See the infotainment manual for more information. To play an MP3 CD, follow the same instructions as “Playing an Audio CD.” The following guidelines must be met when creating an MP3 disc, otherwise the CD might not play: . Sampling rate: 16 kHz,

22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, and 48 kHz.

. Bit rates supported: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, 192, 224, 256, and 320 kbps.

. Maximum number of folders:

eight folders with 255 files per folder.

. Maximum of 1,000 files on

a disc.

. Recorded on a CD-R or CD-RW

with a maximum capacity of 700 MB. The Artist/Album/Song Titles/ Genre information requires a CD to be fully scanned before the music navigator works with these menus.

MP3 Music Menu Press the Menu screen button while that source is active to access the menu. Press any of the following buttons on the MP3 Menu: Shuffle Songs: Press to play the tracks randomly. Press again to stop shuffle. Playlists: Press to view the playlists stored on the disc. Select a playlist to view the list of all songs in that playlist. There might be a delay before the list displays. Select a song from the list to begin playback. Artists: Press to view the list of artists stored on the disc. Select an artist name to view a list of all songs

by the artist. There might be a delay before the list displays. Select a song from the list to begin playback. Albums: Press to view the albums on the disc. Select the album to view a list of all songs on the album. There might be a delay before the list displays. Select a song from the list to begin playback. Song Titles: Press to display a list of all songs on the disc. Songs are displayed as stored on the disc. There might be a delay before the list displays. To begin playback, select a song from the list. Genres: Press to view the genres. Select a genre to view a list of all songs of that genre. Select a song from the list to begin playback. Folders: Press to open a folder list to access the files within the folder structure.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (17,1)

Root Directory The root directory is treated as a folder. All files contained directly under the root directory are accessed prior to any root directory folders.

Empty Folders If a root directory or folder is empty or contains only folders, the player advances to the next folder in the file structure that contains a compressed audio file. The empty folder(s) are not displayed or numbered.

No Folder When the CD only contains compressed audio files without any folders or playlists, all files are under the root folder.

File System and Naming The song titles, artists, albums, and genres are taken from the file's ID3
tag and are only displayed if present in the tag. If a song title is not

Infotainment System 7-17

present in the ID3 tag, the radio displays the file name as the track name.

Portable devices are controlled by using the menu system described in Operation on page 7-4.

Preprogrammed Playlists The radio recognizes preprogrammed playlists; however, there is no editing capability. These playlists are treated as special folders containing compressed audio song files.

Auxiliary Devices See the infotainment manual for more information. This vehicle may have an auxiliary input jack in the center console, If equipped. Possible auxiliary audio sources include:

Laptop computer

. MP3 player Tape player

The auxiliary input allows portable devices to be connected using the 3.5 mm (1/8 in) input jack or the USB port.

This jack is not an audio output. Do not plug headphones into the auxiliary input jack. Drivers are encouraged to set up any auxiliary device while the vehicle is in P (Park). Connect a 3.5 mm (1/8 in) cable from the auxiliary device to the auxiliary input jack. When a device is connected, the system

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (18,1)

7-18

Infotainment System

automatically begins playing audio from the device over the vehicle speakers. Playback of an audio device connected to the 3.5 mm auxiliary input jack can only be controlled using the controls on the device. Playing from a USB Port For vehicles with a USB port, the following devices may be connected and controlled by the infotainment system.

iPods®

. PlaysForSure Devices (PFD) . USB Drives

Zunes®

Not all iPods, PFDs, USB Drives, and Zunes are compatible with the infotainment system.

Connecting and Controlling an iPod® Not all iPods can be controlled by the infotainment system.

Connecting an iPod Connect the iPod to the USB port.

Searching for a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres . Audiobooks . Composers To search for tracks: 1. Press the MENU/SEL knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Podcasts, Genres, Audiobooks, or Composers.

4. Select the track.

Shuffle Press the MENU/SEL knob and set Shuffle Songs (Random) to On or Off, then press the E BACK button to return to the main screen. On: Plays tracks in the current folder in random order. Off: Plays tracks in the current folder in sequential order.

Repeat Press the MENU/SEL knob and set Repeat to On or Off, then press the E BACK button to return to the main screen. On: Repeats the current track. Off: Playback starts from the beginning of the current track after the last track finishes.

Connecting and Controlling a PlaysForSure Device (PFD) or Zune Connect the PFD or Zune to the USB port.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (19,1)

Searching for a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres To search for tracks: 1. Press the MENU/SEL knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Podcasts, or Genres.

4. Select the track.

Shuffle Functionality Press the MENU/SEL knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order.

Off: Plays current tracks in sequential order.

Repeat Functionality Press the MENU/SEL knob and set Repeat to On or Off. Repeat On: Repeats the current track. Repeat Off: Playback starts from the beginning of the current track after the last track finishes.

USB Menu Select any of the following buttons on the USB Menu: Shuffle Songs: Select to play the tracks randomly. Select again to stop shuffle. Playlists: Select to view the playlists stored on the USB. Select a playlist to view the list of all songs in that playlist. There might be a delay before the list displays. Select a song from the list to begin playback.

Infotainment System 7-19

Artists: Select to view the list of artists stored on the USB. Select an artist name to view a list of all albums by the artist. There might be a delay before the list displays. To select a song, touch All Songs then select a song or touch an album then select a song from the list to begin playback. Albums: Select to view the albums on the USB. Select the album to view a list of all songs on the album. There might be a delay before the list displays. Select a song from the list to begin playback. Song Titles: Select to display a list of all songs on the USB. Songs are displayed as stored on the disc. There might be a delay before the list displays. To begin playback, select a song from the list. Genres: Select to view the genres on the USB. Select a genre to view a list of all songs of that genre. Select a song from the list to begin playback.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (20,1)

7-20

Infotainment System

Folders: Select to open a folder list to access the files within the folder structure.

File System and Naming The song titles, artists, albums, and genres are taken from the file's ID3
tag and are only displayed if present in the tag. If a song title is not present in the ID3 tag, the radio displays the file name as the track name. Playing from an iPod® This feature supports the following iPod models:

iPod nano (1st, 2nd, 3rd, and 4th generation) iPod with video (5.0 and 5.5
generation). Video is not shown; only audio is supported. iPod classic (6th generation) iPod touch (1st and 2nd generation)

There may be problems with operation and function in the following situations: . When connecting an iPod on

which a more recent version of the firmware is installed than is supported by the infotainment system.

. When connecting an iPod on

which firmware from other providers is installed.

To connect and control an iPod, connect one end of the standard iPod USB cable to the iPod's dock connector. Connect the other end to the USB port in the center console. iPod music information displays on the radio’s display and begins playing through the vehicle’s audio system. The iPod battery recharges automatically while the vehicle is on. When the vehicle is off while an iPod is connected using the iPod

USB cable, the iPod battery stops charging and the iPod automatically turns off. If the iPod is an unsupported model, it can still be listened to in the vehicle by connecting to the auxiliary input jack using a standard 3.5 mm (1/8 in) stereo cable. Shuffle Songs: Select to play the tracks randomly. Select again to stop shuffle. Press any of the following buttons on the iPod Menu: Playlists: 1. Press to view the playlists stored

on the iPod.

2. Select a playlist name to view a

list of all songs in the playlist.

3. Select the desired song from the

list to begin playback.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (21,1)

Artists: 1. Press to view the artists stored

Genres: 1. Press to view the genres stored

3. Select the desired song from the

list to begin playback.

Infotainment System 7-21

on the iPod.

on the iPod.

2. Select an artist name to view a

2. Select a genre name to view a

list of all songs by the artist.

list of artists of that genre.

3. Select the desired song from the

3. Select an artist to view albums

list to begin playback.

Albums: 1. Press to view the albums stored

on the iPod.

2. Select an album name to view a list of all songs on the album or select All Songs to view all songs by the artist.

3. Select the desired song from the

list to begin playback.

Song Titles: 1. Press to view a list of all songs

stored on the iPod.

2. Select the desired song from the

list to begin playback.

or All Songs to view all songs of that genre.

4. Select album to view songs. 5. Select the desired song from the

list to begin playback.

Podcasts: 1. Press to view the podcasts

stored on the iPod.

2. Select a podcast name to play

the desired podcast.

Composers: 1. Press to view the composers

stored on the iPod.

2. Select a composer name to view

a list of all songs by that composer.

Audio Books: 1. Press to view the audio books

stored on the iPod.

2. Select an audio book name to view a list of all audio books. 3. Select the desired audio book from the list to begin playback.

Playing from an iPhone® This feature supports the following iPhone model:

iPhone (3Gs – 5)

To use the iPhone, follow the same instructions as stated earlier for using an iPod.

Chevrolet Equinox Owner Manual 6081479) - 2014 - crc2 - 10/23/13

(GMNA-Localizing-U.S./Canada-

Black plate (22,1)

7-22

Infotainment System

Phone

Bluetooth (Overview) See the infotainment manual for more information. For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing: . Placement and receipt of calls in

a hands-free mode.

. Sharing of the cell phone’s

address book or contact list with the vehicle.

To minimize driver distraction, before driving, and with the vehicle parked: . Become familiar with the

features of the cell phone. Organize the phone book and contact lists clearly and delete duplicate or rarely used entries. If possible, program speed dial or other shortcuts.

. Review the controls and

operation of the infotainment system.

. Pair cell phone(s) to the vehicle.

The system may not work with all cell phones. See “Pairing” in this section. If the cell phone has voice dialing capability, learn to use that feature to access the address book or contact list. See “Voice Pass-Thru” in this section.

. See “Storing and Deleting Phone

Numbers” in this section.

{ Warning

When using a cell phone, it can be distracting to look too long or too often at the screen of the phone or the infotainment system. Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.

Vehicles with a Bluetooth system can use a Bluetooth-capable cell phone with a Hands-Free Profile to make and receive phone calls. The infotainment system and voice