Doing Your Own Work 5-3 Engine Soon Light ....................................... 3-30 Publications Ordering Information ................... 7-1 1 7-1 2
Sewice Bulletins ............................................. Service Engine Soon Light in the United States
or Check Engine Light in Canada .................................................. Service Manuals ............................................. Servicing Your Air Bag-Equipped Vehicle Setting Preset Stations ............................ Setting the Temperature ................................... Setting the Time
3-30 7-1 1 ............ 1-69 3-39, 3-42 3-20
Radios with HR and MN Buttons ................... 3-38 Radios with the Set Button ........................... 3-38 Setting the Tone (Bassnreble) .................. 3-40, 3-43 Sheet Metal Damage ....................................... 5-88 Shifting Into Park (P) ....................................... 2-27 ................................... Shifting Out of Park (P) 2-29 Short Trip/City Definition .................................... 6-5 Short TripKity Intervals ..................................... 6-5 Short Trip/City Scheduled Maintenance 6-7 Shoulder Belt Height Adjuster ............... ..... 1-20 Skidding ........................................ ......... 4-13 Sliding Door Security Lock ............................... 2-1 1 Sliding Side Door ............................................ 2-10 ....................... 4-18 Some Other Rainy Weather Tips Spare Tire Check ............................................ 6-27
...... ...
12
Special Fabric Cleaning Problems ..................... Specifications, Capacities ................................. Speedometer .................................................. Starter Switch Check ....................................... Starting Your Engine ....................................... Steering .......................................................... Steering in Emergencies .................................. Steering, Suspension and Front Drive Axle
5-84 5-99 3-25 6-28 2-21 4-9 4-10
Boot and Seal Inspection .............................. Steering Tips ................................................... Storage Areas ................................................ Convenience Net ......................................... Luggage Carrier .......................................... Overhead Console .......................................
6-30 4-9 2-38 2-45 2-44 2-39 Storing a Flat or Spare Tire and Tools ............... 5-81 Stuck in Sand, Mud, Ice or Snow ...................... 4-28 Sun Visors ..................................................... 2-17 Sunglasses Storage Compartment ..................... 2-44
Taillamps ....................................................... 5-60 ..................................... Theft.Deterrent. Radio 3-47 Theft-Deterrent Systems ................................... 2-18 Passlock@ ............................................... 2-18 Throttle System Inspection ........................... 6-31 Tilt Wheel ........................................................ 3-5 Tire Inflation Check ......................................... 6-26
Tires .....................................................
5.63. 5-88 ........................................ Buying New Tires 5-66 Chains ....................................................... 5-70 Changing a Flat Tire .................................... 5-71 Compact Spare Tire ..................................... 5-82 If a Tire Goes Flat ....................................... 5-70 Inflation - Tire Pressure ............................... 5-64 ................................ 5-64 Inspection and Rotation ......................... 5-67 Uniform Tire Quality Grading Wheel Alignment and Tire Balance ................. 5-69 Wheel Replacement ..................................... 5-69 ...................... 5-66 When It To Use the Engine Coolant Heater .................... 2-22 ............................. Top of the Instrument Panel 5-85 Top Strap ...................................................... 1-48 ............................... Top Strap Anchor Location 1-50 ....... 2-29 Torque Lock ....... 4-35 Total Weight on Your Vehicle’s Tires Tow/Haul Mode Button ..................................... 2-25 ................................... 3-36 Tow/Haul Mode Light Towing
.................................
Is Time for New Tires
Recreational Vehicle ..................................... 4-29 Towing a Trailer .......................................... 4-31 Your Vehicle ............................................... 4-29 Trailer Brakes ................................................. 4-36 ..................................... Trailer Wiring Harness 4-41 Trailering Package .......................................... 4-31 Transfer Case 5-52 Transmission
................................................
...
Fluid, Automatic ...........................................
5-25
Transmission Operation. Automatic .................... 2-23 Transmission. Transaxle. Transfer Case Unit
Repair Manual ............................................ 7-11 Transportation Options ...................................... 7-9 Trip Odometer ................................................ 3-25 Turn and Lane Change Signals .......................... 3-6 Turn Signal/Multifunction Lever ........................... 3-6 Turn Signals When Towing a Trailer .................. 4-38
Underbody Flushing Service ................. Underhood Fuse Block .................... Understanding Radio .... Uniform Tire Quality Grading ......................... United States ................................................... Unlocking the Theft-Deterrent Feature
Reception
..... 6-29 ..... 5-96 ..... 3-50 5-67 7-4
After a Power Loss ...................................... 3-49 Used Replacement Wheels .............................. 5-70 Using Cleaner on Fabric .................................. 5-84 Using HomeLink@ ........................................... 2-37
Vehicle
Control ..................................................... 4-6 Damage Warnings ........................................... iv Loading ...................................................... 4-29 Symbols ......................................................... iv
13
Vehicle Identification
............................................. 5-91 Number (VIN) Service Parts identification Label ................... 5-91 Vehicle Storage .............................................. 5-47 Vinyl ............................................................. 5-85 Visor Vanity Mirror .......................................... 2-17 Visors ........................................................... 2-1 7 Voltmeter Gage .............................................. 3-28
Warning Lights. Gages and Warnings
Indicators ................ 3-23
Hazard Warning Flashers ............................... Other Warning Devices .................................. Safety and Symbols ......................................... Vehicle Damage ..............................................
Washing Your Vehicle .................. Weatherstrip Lubrication ................... Weight of the Trailer ........................................ Weight of the Trailer Tongue ............................. What Kind of Engine Oil to Use ........................ What to Do with Used Oil ................................ What to Use .......................... Wheels
3-4 3-5 ... 111 iv ............ 5-86 ........ 6-27 4-33 4-35 5-17 5-19 5-28, 5-40, 5-41, 5-53
Alignment and Tire Balance Replacement ....................
..........................
5-69 ......... 5-69
....
When to Add Engine Oil .................................. 5-16 When to Change Engine Oil ............................. 5-18 When to Check .............................................. 5-64 ............................ When to Check and Change 5-25 When to Check Lubricant ................................. 5-53 When to Check Power Steering Fluid ................ 5-40 When You Are Ready to Leave After
Parking on a Hill ......................................... Where to Put the Restraint ............................... Why Safety Belts Work .................................... Windows ....................................................... Manual ...................................................... Power ........................................................ Windshield and Wiper Blades ........................... Windshield Washer ........................................... Fluid ..........................................................
4-40 1-47 1-14 2-16 2-16 2-17 5-87 3-8 5-41 Windshield Washer Fluid Level Check ................ 6-26 Windshield Wiper
Blade Replacement ...................................... Fuses ........................................................ Windshield Wipers ............................................ Winter Driving ............................................ Wiper Blade Check
5-62 5-92 3-8 4-24 ............................. 6-27
....
four Vehicle and the Environment
....... .. 6-2
14
The 2003 Chevrolet Astro Owner Manual
Seats and Restraint Systems ........................... ............................................... ............................................... ............................................. ....................................... ....................................... ............................
Front Seats Rear Seats Safety Belts Child Restraints Air Bag System Restraint System Check
................................................. ............................
Features and Controls ..................................... ........................................................ .......................................
Keys Doors and Locks Windows Theft-Deterrent Systems Starting and Operating Your Vehicle Mirrors HomeLink@ Transmitter Storage Areas
.................................................... ............................. ......................................... ........................................... .......................... Overview ......................................
Instrument Panel . Instrument Panel Climate Controls Warning Lights. Gages and Audio System(s)
....................................... Driving Your Vehicle .......................................
Indicators
I-! 1-2 1-7 1-13 1-35 1-62 1-71 2-1 2-2 2-7 2-1 6 2-1 8 ........... 2-19 2-32 2-34 2-38 3-1 3-2 3-18 ......... 3-23 3-38 4-1 ........ 4-2 4-29
Your Driving, the Road, and Your Vehicle Towing
...................................................
the Hood
............................................... ............................................... ....................................
Service and Appearance Care .......................... ..................................................... .........................................................
Service Fuel Checking Things Under All-Wheel Drive Rear Axle Front Axle Bulb Replacement Windshield Wiper Blade Replacement Tires Appearance Care Vehicle Identification Electrical System Capacities and Specifications Normal Maintenance Replacement Parts
5-1 5-3 5-5 ............... 5-11 ........................................ 5-52 5-53 5-54 5-55 ......... 5-62 5-63 5-83 5-91 5-92 5-99 ...... 5-1 01 6-1 6-2 7-1 .................. 7-2 7-10
...................................................... ..................................... ................................. ...................................... .....................
Maintenance Schedule ..................................... ................................ Customer Assistance Information ....................
Customer Assistance Information Reporting Safety Defects
Index ................................................................
Maintenance Schedule
...........................
Canadian Owners You can obtain a French copy of this manual from your dealer or from: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 How to Use This Manual Many people read their owner’s manual from beginning to end when they first receive their new vehicle. If you do this, it will help you learn about the features and controls for your vehicle. In this manual, you’ll find that pictures and words work together to explain things. Index A good place to look for what you need is the Index in back of the manual. It’s an alphabetical list of what’s in the manual, and the page number where you’ll find it.
GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem and the name CHEVY ASTRO are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice. For vehicles first sold in Canada, substitute the name ”General Motors of Canada Limited” for Chevrolet Motor Division whenever it appears in this manual. Please keep this manual in your vehicle, so it will be there if you ever need it when you’re on the road. If you sell the vehicle, please leave this manual in it so the new owner can use it.
Litho in U.S.A. Part No. C2310 A First Edition
II
@Copyright General Motors Corporation 06/19/02 All Rights Reserved
Safety Warnings and Symbols
You will find a number of safety cautions in this book. We use a box and the word CAUTION to tell you about things that could hurt you if YOU were to ignore the warning.
You will also find a circle with a slash through it in this book. This safety symbol means “Don’t,’’ “Don’t do this” or “Don’t let this happen.”
These mean there is something that could hurt you or other people.
In the caution area, we tell you what the hazard is. Then we tell you what to do to help avoid or reduce the hazard. Please read these cautions. If you don’t, you or others could be hurt.
... Ill
Vehicle Damage Warnings
Also, in this book you will find these notices:
Notice: These mean there is something that could damage your vehicle. A notice will tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly. But the notice will tell you what to do to help avoid the damage. When you read other manuals, you might see CAUTION and NOTICE warnings in different colors or in different words. You’ll also see warning labels on your vehicle. They use the same words, CAUTION or NOTICE.
Vehicle Symbols Your vehicle has components and labels that use symbols instead of text. Symbols, used on your vehicle, are shown along with the text describing the operation or information relating to a specific component, control, message, gage or indicator. If you need help figuring out a specific name of a component, gage or indicator reference the following topics:
Seats and Restraint Systems in Section 1 Features and Controls in Section 2 Instrument Panel Overview in Section 3 Climate Controls in Section 3 Warning Lights, Gages and Indicators in Section 3 Audio System(s) in Section 3 Engine Compartment Overview in Section 5
iv
These are some examples of vehicle symbols you may find on your vehicle:
*&: @
LATCH BOTH LAP AND SHOULDER BELTS TO PROTECT OCCUPANT
DO NOT TWIST SAFETY BELT WHEN AlTACHING
\!$!
MOVE SEAT FULLY
REARWARD /a
FASTEN SEAT BELTS
SECURE CHILD SEAT
PULL BELT
COMPLETELY rHEN SECURE CHILD SEAT
POWER WINDOW
\\I/'
CAUTION POSSIBLE INJURY
PROTECT EYES BY SHIELDING
CAUSTIC BATTERY K I D COULD CAUSE BURNS
AVOID SPARKS OR FLAMES
SPARK OR FLAME COULD EXPLODE BAlTERY
DO NOT INSTALL A REAR-FACING CHILD RESTRAINT IN THIS SEATING POSITION
DO NOT INSTALL A 'ORWARD-FACING CHILD RESTRAINT IN THIS SEATING POSITION
DOOR LOCK UNLOCK
(a)
COOLANT FAN
u- CHARGING I-1
0 , \
BATTERY
ENGINE
TEMP
COOLANT cc
LIGHTING -
MASTER SWITCH
TURN SIGNALS
BRAKE
SYSTEM
LAMPS Pf ***o $0 ANTI-LOCK (@)
ENGINE OIL PRESSURE W
LAMPS ea.
DAYTIME 0.0 RUNNING
LAMPS
BRAKES
OWNERS MANUAL
SERVICE
MANUAL
Model Reference This manual covers these models:
Cargo Van
Passenger Van
vi
Section 1
Seats and Restraint Systems
Front Seats ...................................................... 1-2 Manual Seats ................................................ 1-2 Power Seat ................................................... 1-3 Manual Lumbar .............................................. 1-3 Reclining Seatbacks ........................................ 1.4 Head Restraints ............................................. 1.5 Seatback Latches ........................................... 1.6 Rear Seats ....................................................... 1-7 Rear Seat Operation ....................................... 1-7 Bench Seat .................................................. 1-1 1 Bucket Seats ............................................... 1-1 2 Safety Belts ................................................... 1-1 3 ................ 1-13 Safety Belts: They Are for Everyone Questions and Answers About Safety Belts ...... 1-17 How to Wear Safety Belts Properly ................. 1-18 Driver Position .............................................. 1.18 Safety Belt Use During Pregnancy .................. 1-26 Right Front Passenger Position ....................... 1.27 Center Passenger Position ............................. 1.27 Rear Seat Passengers Rear Safety Belt Comfort Guides for
.................................
Children and Small Adults ...................... 1.32 Safety Belt Extender ..................................... 1-34 Child Restraints ............................................. 1-35 Older Children .............................................. 1-35 ....... 1.38 Infants and Young Child Restraint Systems ................................. 1.44
Children ..........
-1-29
Where to Put the Restraint ............................. 1-47 Top Strap .................................................... 1-48 Top Strap Anchor Location ............................. 1-50 Lower Anchorages and Top Tethers for
Children (LATCH System) ...........................
1-52
Securing a Child Restraint Designed for
Securing a Child Restraint in a Rear
the LATCH System .................................... 1-54 Outside Seat Position ............................ 1-54
Securing a Child Restraint in a Center
Seat Position ............................................
1-57
Securing a Child Restraint in the Right
...............
the Air Bags?
Front Seat Position ................................... Air Bag System ..............................................
-1 -59 1-62 ..... 1-64 Where Are When Should an Air Bag Inflate? .................... 1-66 What Makes an Air Bag Inflate? ..................... 1-67 How Does an Air Bag Restrain? ..................... 1-67 What Will You See After an 1.68 Servicing Your Air Bag-Equipped Vehicle ......... 1.69 Adding Equipment to Your
Air Bag Inflates? .......................................
Air Bag-Equipped Vehicle ........................... 1.70
Restraint System Check .................................
Checking Your Replacing Restraint System Parts
Restraint Systems ...
After a Crash ............................................
-1-71 ..... 1-71
1-71
1-1
Front Seats
Manual Seats
You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you don’t want to. Adjust the driver’s seat only when the vehicle is not moving.
The bucket seats can be adjusted forward or rearward using the lever located under the front
Move the seat adjustment lever toward the ouboard side of the seat to unlock it. Slide the seat to where you want it. Then release the lever and try to move the seat with your body, to make sure that the seat is locked into place.
1 -2
Power Seat If your vehicle has this feature, there will be controls located on the inboard side of the driver’s seat.
Manual Lumbar
To raise or lower the front of the seat cushion, raise or lower the lever located toward the front of the vehicle. To raise or lower the rear of the seat cushion, raise or lower the lever located toward the rear of the vehicle. To move the entire seat backwards, forward, or up or down, move the center knob.
If your vehicle has this feature, there will be a knob located on the inboard side of the driver’s and passenger’s bucket seats. Turn the knob toward the front of the vehicle to increase lumbar support. Turn the knob toward the rear of the vehicle to decrease lumbar support.
1 -3
Reclining Seatbacks
There is a lever located on the inside of the seat to adjust the seatback.
You can adjust the seatback by lifting the lever and leaning back. Release the lever to lock the seatback where you want it. Pull up on the lever, lean forward and the seatback will go to an upright position.
1 -4
But don’t have a seatback reclined if your vehicle is moving.
Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can't do their job when you're reclined like this. The shoulder belt can't do its job because it won't be against your body. Instead, it will be in front of you. In a crash you could go into it, receiving neck or other injuries. The lap belt can't do its job either. In a crash the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries. For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear your safety belt properly.
Head Restraints
Adjust your head restraint so that the top of the restraint is closest to the top of your head. This position reduces the chance of a neck injury in a crash.
1-5
Seatback Latches
The seatback lever is located on the right rear of your seat.
After the latch has been released, push the seatback toward the front of the vehicle until it locks into place. To raise the seatback, unlock the seatback latch by pushing up on the lever while pushing down on the upper edge of the seatback. Move the seatback into the upright position. Make sure the seatback is locked whe
t is back in the upright position.
If the seatback isn’t locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked.
To fold your non-touring bench seatback forward, pull up on the latch release lever while pulling the seatback toward the rear of the vehicle.
RELEASE
1-6
Rear Seats
Rear Seat Operation Removing the Rear Seats To remove the rear seats, do the following:
2. If you have a safety
belt guide on your seat, pull the safety belt all the way out through the guide.
1. If you are removing the
center seat, remove the right lap-shoulder belt. To do this, press the tip of a key into the release hole of the safety belt attachment while pulling up on safety the
belt.
SEAT REMOVAL
INSERT KEY
3. To store the safety belt while the second row bench
seat is removed, pull the belt out and put both buckles in the passenger’s side rear storage bin. Route the belt out of the forward edge of the storage bin. Close the cover to retain the belt.
4. Pull up on the seatback latch on the right rear of
the seat. Push the seatback down until it locks into place.
1 -7
5. Lift up on the left and the right seat release levers at the same time. The latches are near the floor on the rear legs of the seat.
6. Lift up on the rear of the seat to remove the seat
assembly from the rear latch pins. Then, pull back and lift the seat out of the vehicle. Your seat release latch lever is operated with a two-stage mechanism. To fully release the latch, two levels of lift effort will be required. First, a low effort to overcome the first stage and then a moderate effort to fully release the latch.
1 -8
Replacing the Rear Seats
1. Lower the seat into position. Make sure the front
retainers are hooked onto the anchor pins.
2. Pull the seat down to latch the rear retainers. Make sure the seat is locked in by pulling up and down on the seat.
A seat that isn’t locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it.
1-9
3. To raise the seatback, do the following:
3.1. Unlock the seatback latch by pulling up on
the latch release lever at the right rear of the seat, while pushing down on the upper edge of the seatback.
3.2. Move the seatback into the upright position. Make sure the seatback is locked when it is back in the upright position.
If you are replacing the center seat, connect the right lap-shoulder belt to the attachment on the seat cushion. If you have a safety belt guide on your seat, pull the belt through the guide before reattaching the lap-shoulder belt to the side of the seat. The release hole should be facing outward.
If you installed the safety belt with the release hole facing inward (toward the seat), slide the plastic cover up so you can see the buckle. Disconnect the seat belt. Slide the cover back down and reinstall the belt correctly.
routed, not
A safety --It that _ _ impropc properly attached, or twisted won’t provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted.
1-10
Bench Seat Each bench seat can carry up to three passengers. They can also be removed to increase storage space. Only the rear bench seat can be adjusted forward or rearward using the lever at the front of the seat.
The optional bench seats come with moveable armrests, individual reclining seatbacks, adjustable headrests and a fold-down center armrest console.
Move the seat adjustment lever located at the front of the seat toward the passenger’s side to unlock it. Slide the seat to where you want it. Then release the lever and try to move the seat with your body, to make sure the seat is locked into place.
The center bench seat has a pivoting right armrest.
To adjust your seatback, pull up on the lever located on the outboard side of the seat cushion.
1-1 1
Bucket Seats
If your vehicle has the optional touring package, your vehicle will have a center console. To raise or lower the center console, press the button located between the beverage holders. Sit in the center seating position only when the console is in an upright and locked position.
For details about headrests, see Head Restraints on page 1-5.
Your vehicle may have rear bucket seats with an adjustment release bar located under the front of the seats. These seats can be adjusted forward or rearward with the release bar. Pull the release bar up to release the seat bottom. Slide the seat where you want it and then let go of the release bar. Then try to move the seat with your body to make sure the seat is locked into place.
1-12
Safety Belts
Safety Belts: They Are for Everyone
This part of the manual tells you how to use safety belts properly. It also tells you some things you should r-+ do with safety belts.
Don’t let anyone ride where he or she can’t wear a safety belt properly. If you are in a crash and you’re not wearing a safety belt, your injuries can be much worse. You can hit things inside the vehicle or be ejected from it. You can be seriously injured or killed. In the same crash, you might not be, if you are buckled up. Always fasten your safety belt, and check that your passengers’ belts are fastened properly too.
it is extremely dangerous to ride in a C N ~ G area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly.
Your vehicle has a light that comes on as a reminder to buckle up. See Safety Belt Reminder Light on page 3-26.
1-13
Why Safety Belts Work When you ride in or on anything, you go as fast as it goes.
In most states and in all Canadian provinces, the law says to wear safety belts. Here’s why: They work. You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up, a person wouldn’t survive. But most crashes are in between. In many of them, people who buckle up can survive and sometimes walk away. Without belts they could have been badly hurt or killed. After more than 30 years of safety belts in vehicles. the facts are clear. In most crashes buckling up does matter ... a lot!
Take the simplest vehicle. Suppose it’s just a seat on wheels.
1-14
'I! uo au0aUlos ]nd
Sic-1
The person keeps going until stopped by something. In a real vehicle, it could be the windshield ...
or the instrument panel ...
1-16
Questions and Answers About Safety Belts
Q: Won’t I be trapped in the vehicle after an
accident if I’m wearing a safety belt?
A: You could be - whether you’re wearing a safety belt or not. But you can unbuckle a safety belt, even if you’re upside down. And your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted.
Q: If my vehicle has air bags, why should I have to
wear safety belts?
A: Air bags are in many vehicles today and will be in most of them in the future. But they are supplemental systems only; so they work with safety belts - not instead of them. Every air bag system ever offered for sale has required the use of safety belts. Even if you’re in a vehicle that has air bags, you still have to buckle up to get the most protection. That’s true not only in frontal collisions, but especially in side and other collisions.
1-17
or the safety belts! With safety belts, you slow down as the vehicle does, You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense.
home, why should I wear safety belts?
Q: If I’m a good driver, and I never drive far from A: You may be an excellent driver, but if you’re in an accident - even one that isn’t your fault - you and your passengers can be hurt. Being a good driver doesn’t protect you from things beyond your control, such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h). Safety belts are for everyone.
How to Wear Safety Belts Properly This part is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your vehicle, see Older Children on page 1-35 or lnfants and Young Children on page 1-38. Follow those rules for everyone’s protection. First, you’ll want to know which restraint systems your vehicle has. We’ll start with the driver position. Driver Position This part describes the driver’s restraint system. Lap-Shoulder Belt The driver has a lap-shoulder belt. Here’s how to wear it properly.
1. Close and lock the door. 2. Adjust the seat so you can sit up straight.
To see how, see “Seats” in the Index.
1-18
3. Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
4. Push the latch plate into the buckle until it clicks.
Pull up on the latch plate to make sure it is secure. If the belt isn’t long enough, see Safety Belt Extender on page 1-34. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The safety belt locks if there’s a sudden stop or crash, or if you pull the belt very quickly out of the retractor.
1-19
To move it down, push and move the height adjuster to the desired position. You can move the adjuster up just by pushing up on the shoulder belt guide. After you move the adjuster to
of the arrows
it in at the top
your shoulder
Shoulder Belt Height Adjuster Before you begin to drive, move the shoulder belt adjuster to the height that is right for you.
1-20
Q: What's wrong with this?
You can be seriously hurt if your slI,ulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body.
A: The shoulder belt is too loose. It won't give nearly
as much protection this way.
1-21
i OUL --elt is
I can be serious injured
'I buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you.
Q: What's wrong with this?
A: The belt is buckled in the wrong place.
1-22
Q: What’s wrong with this?
You can be seriously injured .. jour bell ,oes
over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied at the abdomen, not at the pelvic bones, and that could cause serious or fatal injuries. Be sure the belt goes under the armrests.
A: The belt is over an armrest.
1-23
?
IUS
injure
f you wear
feu can be se shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which aren’t as strong as shoulder bones. You could also severely injure internal organs like your liver or spleen.
Q: What’s wrong with this?
A: The shoulder belt is worn under the arm. It should
be worn over the shoulder at all times.
1-24
Q: What’s wrong with this?
A: The belt is twisted across the body.
You can be seriously injured by a twisted beltl In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it.
1-25
Safety Belt Use During Pregnancy
Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don’t wear safety belts.
To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
1-26
A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.
Center Passenger Position Lap Belt
The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly. Right Front Passenger Position To learn how to wear the right front passenger’s safety belt properly, see Driver Position on page 1-18. The right front passenger’s safety belt works the same way as the driver’s safety belt - except for one thing. If you ever pull the lap portion of the belt out all the way, you will engage the child restraint locking feature. If this happens, just let the belt go back all the way and start again.
If your vehicle has rear bench seats, someone can sit in the center positions.
1-27
When you sit in a center seating position, you have a lap safety belt, which has no retractor. To make the belt longer, tilt the latch plate and pull it along the belt.
To make the belt shorter, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt. If the belt isn’t long enough, see Safety Belt Extender on page 1-34. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
1 -28
Rear Seat Passengers It’s very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who aren’t safety belted can be thrown out of the vehicle in a crash. And they can strike others in the vehicle who are wearing safety belts. Rear Seat Outside Passenger Positions
Lap-Shoulder Belt These positions have lap-shoulder belts. Here’s how to wear one properly.
1. Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
2. Push the latch plate into the buckle until it clicks.
1-29
3. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder part.
If the belt stops before it reaches the buckle, tilt the latch plate and keep pulling until you can buckle it. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 1-34. Make sure the release button on the buckle is positioned so that you would be able to unbuckle the safety belt quickly if you ever had to.
1-30
is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body.
The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. Phis could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The safety belt locks if there’s a sudden stop or a crash.
To unlatch the belt, just push the button on the buckle.
1-31
Rear Safety Belt Comfort Guides for Children and Small Adults
Your vehicle may have this feature already. If it doesn’t, you can get it from any GM dealer. This feature will provide added safety belt comfort for older children who have outgrown booster seats and for small adults. When installed on a shoulder belt, the comfort guide better positions the belt away from the neck and head. To provide added safety belt comfort for children who have outgrown child restraints and booster seats and for smaller adults, the comfort guides may be installed on the shoulder belts. Here’s how to install a comfort guide and use the safety belt:
1-32
1. Remove the guide from its storage clip on the side
of the seatback.
Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order you an extender. It’s free. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you. The extender will be just for you, and just for the seat in your vehicle that you choose. Don’t let someone else use it, and use it only for the seat it is made to fit. To wear it, just attach it to the regular safety belt.
4. Buckle, position and release the safety belt as
described in Rear Seat Passengers on page 1-29. Make sure that the shoulder belt crosses the shoulder.
To remove and store the comfort guides, squeeze the belt edges together so that you can take them out of the guides. Slide the guide onto the storage clip.
1-34
Child Restraints
Older Children
Q: What is the proper way to wear safety belts? A: If possible, an older child should wear a
lap-shoulder belt and get the additional restraint a shouider beit can provide. The shouider belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash.
Accident statistics show that children are safer if they are restrained in the rear seat. In a crash, children who are not buckled up can strike other people who are buckled up, or can be thrown out of the vehicle. Older children need to use safety belts properly.
Older children who have outgrown booster seats should wear the vehicle’s safety belts. If you have the choice, a child should sit next to a window so the child can wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide.
1-35
Q: What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck? A: Move the child toward the center of the vehicle, but be sure that the shoulder belt still is on the child’s shoulder, so that in a crash the child’s upper body would have the restraint that belts provides. If the child is sitting in a rear seat outside position, see Rear Safety Belt Comfort Guides for Children and Small Adults on page 1-32. If the child is so small that the shoulder belt is still very close to the child’s face or neck, you might want to place the child in a seat that has a lap belt, if your vehicle has one.
Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time.
1-36
I I Never do this.
Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen. That could cause serious or fatal injuries.
Wherever the child sits, the lap portion of the belt should be worn low and snug on the hips, just touching the child’s thighs. This applies belt force to the child’s pelvic bones in a crash.
1-37
Infants and Young Children Except Cargo Vans Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle. Every time infants and young children ride in vehicles, they should have the protection provided by appropriate restraints. Young children should not use the vehicle's adult safety belts alone, unless there is no other choice. Instead, they need to use a child restraint.
1-38
People should never hold a baby in their arms while riding in a vehicle. A baby doesn't weigh much - until a crash. During a crash a baby will become so heavy it is not possible to hold it. CAUTION: (Continued)
-
For example, in a crash at only 25 mph (40 km/h), a 12-lb. (5.5 kg) baby will suddenly become a 240-lb. (110 kg) force on a person’s arms. A baby should be secured in an appropriate restraint.
Children who are up against, or very close to, any air bag when it inflates can be seriously injured or killed. Air bags plus lap-shoulder belts offer outstanding protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide.
1-39
Newborn infants need complete support, including support for the head and neck. This is necessary because a newborn infant’s neck is weak and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing seat settles into the restraint, so the crash forces can be distributed across the strongest part of an infant’s body, the back and shoulders. Infants always should be secured in appropriate infant restraints.
Q: What are the different types of add-on child
restraints?
A: Add-on child restraints, which are purchased by the
vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used. For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufacturer’s instructions that come with the restraint state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs.
1-40
The .- Ddy st. -.- re of a young -.1ild is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on thehip bones, as it should. Instead, it may settle up around the child’s abdomen. In a crash, the belt would apply force on a body area that’s unprotected by any bony structure. This alone could cause serious or fatal injuries. Young children always should be secured in appropriate child restraints.
Children who are L against, or very close to, any air bag when it inflates can be seriously injured or killed. Air bags plus lap-shoulder belts offer outstanding protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide.
1-41
. __
born infants need complete support,
its body. In a crash,
including support for the head and neck. This is necessary because a newborn infant’s neck is weak and its head weighs so much compared with the rest of an infant in a rear-facing seat settles into the restraint, so the crash forces can be distributed across the strongest part of an infant’s body, the back and shoulders. Infants always should be restrained in appropriate infant restraints. in However, infants, who should be restrained a rear-facing child restraint, cannot ride safely in this vehicle.
I is qi
The body structure of a young cf unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child’s abdomen. In a crash, the belt would apply force on a body area that’s unprotected by any bony structure. This alone could cause serious or fatal injuries. Young children always should be secured in appropriate child restraints.
1-42
People should never hold a baby in their arms while riding in a vehicle. A baby doesn’t weigh much - until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12-lb. (5.5 kg) baby will suddenly become a 240-lb. (1 10 kg) force on a person’s arms.
1 -43
Child Restraint Systems
An infant car bed (A), a special bed made for use in a motor vehicle, is an infant restraint system designed to restrain or position a child on a continuous flat surface. Make sure that the infant’s head rests toward the center of the vehicle.
A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.
1 -44
A forward-facing child seat (C-E) provides restraint for the child's body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields.
A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle's safety belt system. Some booster seats have a shoulder belt positioner, and some high-back booster seats have a five-point harness. A booster seat can also help a child to see out the window.
1-45
When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets federal motor vehicle safety standards. Then follow the instructions for the restraint. You may find these instructions on the restraint itself or in a booklet, or both. These restraints use the belt system in your vehicle, but the child also has to be secured within the restraint to help reduce the chance of personal injury. When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer.
Q: How do child restraints work? A: A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle’s owner. For many years, add-on child restraints have used the adult belt system in the vehicle. To help reduce the chance of injury, the child also has to be secured within the restraint. The vehicle’s belt system secures the add-on child restraint in the vehicle, and the add-on child restraint’s harness system holds the child in place within the restraint. One system, the three-point harness, has straps that come down over each of the infant’s shoulders and buckle together at the crotch. The five-point harness system has two shoulder straps, two hip straps and a crotch strap. A shield may take the place of hip straps. A T-shaped shield has shoulder straps that are attached to a flat pad which rests low against the child’s body. A shelf- or armrest-type shield has straps that are attached to a wide, shelf-like shield that swings up or to the side.
1-46
Where to Put the Restraint Except Cargo Vans Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. General Motors, therefore, recommends that child restraints be secured in a rear seat including an infant riding in a rear-facing infant seat, a child riding in a forward-facing child seat and an older child riding in a booster seat. Never put a rear-facing child restraint in the fro
’ passenger seat. Here’s why:
A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s air bag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating air bag. Always secure a rear-facing child restraint in a rear seat.
CAUTION:
(Continued)
You may secure a forward-facing child restraint in the right front seat, but before you do, always move the front passenger seat as far back as it in will go. It’s better to secure the child restraint a rear seat.
Wherever you install it, be sure to secure the child restraint properly. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in your vehicle - even when no child is in it.
1-47
Top Strap
Some child restraints have a top strap, or “top tether.” It can help restrain the child restraint during a collision. For it to work, a top strap must be properly anchored to the vehicle. Some top strap-equipped child restraints are designed for use with or without the top strap being anchored. Others require the top strap always to be anchored. Be sure to read and follow the instructions for your child restraint. If yours requires that the top strap be anchored, don’t use the restraint unless it is anchored properly. If the child restraint does not have a top strap, one can be obtained, in kit form, for many child restraints. Ask the child restraint manufacturer whether or not a kit is available.
Cargo Vans The child restraint must be secured properly in the passenger seat. Never put a rear-facing child restraint in this vehicle. Here’s why:
A child in a r - r-fa 1g child restraint can be seriously injured or killed if the passenger’s air bag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating air bag. Do not use a rear-facing child restraint in this vehicle. If a forward-facing child restraint is suitable for your child, always move the front passenger seat as far back as it will go.
Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in your vehicle - even when no child is in it.
I -48
In Canada, the law requires that forward-facing child restraints have a top strap, and that the strap be anchored. In the United States, some child restraints also have a top strap. If your child restraint has a top strap, it should be anchored. Anchor the top strap to one of the following anchor points. Be sure to use an anchor point located on the same side of the vehicle as the seating position where the child restraint will be placed. If you have an adjustable head restraint, route the top strap under it. Once you have the top strap anchored, you’ll be ready to secure the child restraint itself. Tighten the top strap when and as the child restraint manufacturer’s instructions say.
1-49
Top Strap Anchor Location If your vehicle is a cargo van, the anchoring point for a top strap is located at the rear of the seat cushion on the right front passsenger's seat spacer bar. Anchor the top strap through the two slots.
If your vehicle is a passenger van with rear seats, recommended that you secure a child restraint with a top strap only in the outboard positions of the second row. Bucket Seats: An anchoring point is located below the rear of the seat cushion on the spacer bar. Anchor the top strap through the two slots on the bar.
it is
Cargo Van Models
Passenger Van Bucket Seats
1 -50
Bench Seats: An anchor bracket is located at the rear of the seat cushion near the top rear of the seat leg for each outboard seating position of the second row. For the third row, an anchor bracket is located at the rear of the seat cushion near the top rear of the seat leg for the right outboard seating position. If you have adjustable head restraints, raise the head restraint and route the top strap under it.
Passenger Van Bench Seat (Second row)
The third row has one anchor for the passenger side outboard position only.
1-51
Lower Anchorages and Top Tethers for Children (LATCH System)
If you have a passenger van it has the LATCH system. It has two sets of anchors (A) in the second row of seats. In a seven passenger van, the anchors are located in each of the bucket seats in the second row. In an eight passenger van, the anchors are located in the driver and passenger side seating positions of the second row bench seat.
In order to use the system, you need either a forward-facing child restraint that has attaching points (B) at its base and a top tether anchor (C), or a rear-facing child restraint that has attaching points (B), as shown here.
1-52
With this system, use the LATCH system instead of the vehicle’s safety belts to secure a child restraint.
If a LATCH-type child restraint isn’t attached t~ its anchorage points, the restraint won’t be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchorage points, or use the vehicle’s safety belts to secure the restraint. See “Securing a Child Restraint Designed for the LATCH System”, “Securing a Child Restraint in a Rear Outside Seat Position”, “Securing a Child Restraint in a Center Seat Position”, or “Securing a Child Restraint in a Right Front Seat Position” in the Index for information on how to secure a child restraint in your vehicle.
1-53
Securing a Child Restraint Designed Securing a Child Restraint in a Rear for the LATCH System 1. Find the anchors for the seating position you want
Outside Seat Position
to use, where the bottom of the seatback meets the back of the seat cushion.
2. Put the child restraint on the seat. 3. Attach the anchor points on the child restraint to the
anchors in the vehicle. The child restraint instructions will show you how.
4. If the child restraint is forward-facing, attach the top
strap to the top strap anchor. See Top Strap on page 7-48. Tighten the top strap according to the child restraint instructions.
5. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, simply unhook the top strap from the top tether anchor and then disconnect the anchor points.
1-54
If your child restraint is equipped with the LATCH system, see Lower Anchorages and Top Tethers for Children (LATCH System) on page 1-52.
You’ll be using the lap-shoulder belt. See Top Strap on page 1-48 if the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.
1. Put the restraint on the seat. 2. Pick up the latch plate and run the lap and shoulder
portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how.
3. Tilt the latch plate to adjust the belt if needed.
1-55
4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
5.
To tighten the belt, pull up on the shoulder belt while you push down on the child restraint. If you’re using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt. Push and pull the child restraint in different directions to be sure it is secure.
6.
1-56
To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger.
Securing a Child Restraint in a Center Seat Position Bench Seat
You’ll be using the lap belt. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. See Top Strap on page 1-48 if the child restraint has one.
If your child restraint is equipped with the LATCH system, see Lower Anchorages and Top Tethers for Children (LATCH System) on page 1-52.
1. Make the belt as long as possible by tilting the latch
plate and pulling it along the belt.
2. Put the restraint on the seat.
1-57
3. Run the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how.
5. To tighten the belt, pull its free end while you push
down on the child restraint. If you’re using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
6. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, just unbuckle the vehicle’s safety belt. It will be ready to work for an adult or larger child passenger.
4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
1-58
a rear facing child restr; ’ t in this seat. Here’s why: .
Your vehicle has a front passenger air bag. Never put
Securing a Child Restraint in the Right Front Seat Position
If your child restraint is equipped with the LATCH system, see Lower Anchorages and Top Tethers for Children (LATCH System) on page 1-52.
A child in a rear-facing child restraint can be seriously injured or killed if the front passenger’s air bag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating air bag. If your vehicle is a passenger van, always secure a rear-facing child restraint in a rear seat. If your vehicle is a cargo van, do not use a rear-facing child restraint in this vehicle. If a forward-facing child restraint is suitable for your child, always move the passenger seat as far back as it will go.
Although a rear seat is a safer place, you can secure a forward-facing child restraint in the right front seat.
1-59
You’ll be using the lap-shoulder belt. See Top Strap on page 1-48, if the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.
1. Because your vehicle has a right front passenger
air bag, always move the seat as far back as it will go before securing a forward-facing child restraint. See “Seats” in the Index.
2. Put the restraint on the seat. 3. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle’s safely belt through or around the restraint. The child restraint instructions will show you how.
. .
4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
1-60
LI.cLI..g things inside the vehicle or being ejected from it. Air bags are designed to work with safety belts, but don’t replace them. Air bags are designed to deploy only in moderate to severe frontal and near frontal crashes. They aren’t designed to inflate at all in rollover, rear or low-speed frontal crashes, or in many side crashes. And, for some unrestrained occupants, air bags may provide less protection in frontal crashes than more forceful air bags have provided in the past. Everyone in your vehicle should wear a safety belt properly - whether or not there’s an air bag for that person.
Air Bag System This part explains the air bag system. Your vehicle has air bags - one air bag for the driver and another air bag for the right front passenger. Frontal air bags are designed to help reduce the risk of injury from the force of an inflating air bag. But these air bags must inflate very quickly to do their job and comply with federal regulations. Here are the most important things to know about the air bag system:
You ca.. Je severely injured or k i L - ..I a crash if you aren’t wearing your safety belt - even if you have air bags. Wearing your safety belt during a crash helps reduce your chance of
CAUTION:
(Continued)
1-62
All bags ,,,,late with ,;eat force, faster rllan the blink of an eye. If you’re too close to an inflating air bag, as you would be if you were leaning forward, it could seriously injure you. Safety belts help keep you in position before and during a crash. Always wear your safety belt, even with air bags. The driver should sit as far back as possible while still maintaining control of the vehicle.
Anl,,le who is up against, or very close .a, any air bag when it inflates can be seriously injured or killed. Air bags plus lap-shoulder belts offer the best protection for adults, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide. Always secure children properly in your vehicle. To read how, see the parts of this manual called “Older Children” and “Infants and Young Children.”
1-63
Where Are the Air Bags?
AIR BAG
United States
Canada
There is an air bag readiness light on the instrument panel, which shows AIR BAG or the air bag symbol. The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical problem. See Air Bag Readiness Light on page 3-26 for more information.
The driver’s air bag is in the middle of the steering wheel.
1-64
The right front passenger’s air bag is in the instrument panel on the passenger’s side.
16 something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating air bag must be kept clear. Don’t put anything between an occupant and an air bag, and don’t attach or put anything on the steering wheel hub or on or near any other air bag covering.
1-65
In any particular crash, no one can bag should have inflated simply because of the damage to a vehicle or because of what the repair costs were. Inflation is determined by the angle of the impact and how quickly the vehicle slows down in frontal or near-frontal impacts.
say whether an air
When Should an Air Bag Inflate? An air bag is designed to inflate in a moderate to severe frontal, or near-frontal crash. The air bag will inflate only if the impact speed is above the system’s designed “threshold level.” If your vehicle goes straight into a wall that doesn’t move or deform, the threshold level is about 9 to 16 mph (14 to 26 km/h). The threshold level can vary, however, with specific vehicle design, so that it can be somewhat above or below this range. If your vehicle strikes something that will move or deform, such as a parked car, the threshold level will be higher. The air bag is not designed to infalte in rollovers, rear impacts, or in many side impacts because inflation would not help the occupant.
1-66
What Makes an Air Bag Inflate? In an impact of sufficient severity, the air bag sensing is in a crash. The sensing system detects that the vehicle system triggers a release of gas from the inflator, which inflates the air bag. The inflator, air bag, and related hardware are all part of the air bag modules inside the steering wheel and in the instrument panel in front of the right front passenger.
How Does an Air Bag Restrain? In moderate to severe frontal or near-frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. Air bags supplement the protection provided by safety belts. Air bags distribute the force of the impact more evenly over the occupant’s upper body, stopping the occupant more gradually. But air bags would not help you in many types of collisions, including rollovers, rear impacts and many side impacts, primarily because an occupant’s motion is not toward those air bags. Air bags should never be regarded as anything more than a supplement to safety belts, and then only in moderate to severe frontal or near-frontal collisions.
1-67
When an air bag inflates, there is dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so. If you have breathing problems but can’t get out of the vehicle after an air bag inflates, then get fresh air by opening a window or a door. If you experience breathing
l problems following an air bag deployment,
you should seek medical attention.
What Will You See After an Air Bag Inflates? After an air bag inflates, it quickly deflates, so quickly that some people may not even realize the air bag inflated. Some components of the air bag module -the steering wheel hub for the driver’s air bag, or the instrument panel for the right front passenger’s bag -will be hot for a short time. The parts of the bag that come into contact with you may be warm, but not too hot to touch. There will be some smoke and dust coming from the vents in the deflated air bags. Air bag inflation doesn’t prevent the driver from seeing or being able to steer the vehicle, nor does it stop people from leaving the vehicle.
1-68
e
Air bags are designed to inflate only once. After they inflate, you’ll need some new parts for your air bag system. If you don’t get them, the air bag system won’t be there to help protect you in another crash. A new system will include air bag modules and possibly other parts. The service manual for your vehicle covers the need to replace other parts. Your vehicle is equipped with a crash sensing and diagnostic module, which records information about the air bag system. The module records information about the readiness of the system, when the system commands air bag inflation and driver’s safety belt usage at deployment. The module also records speed, engine rpm, brake and throttle data. Let only qualified technicians work on your air bag system. Improper service can mean that your air bag system won’t work properly. See your dealer for service.
Notice: If you damage the covering for the driver’s or the right front passenger’s air bag, the bag may not work properly. You may have to replace the air bag module in the steering wheel or both the air bag module and the instrument panel for the right front passenger’s air bag. Do not open or break the air bag coverings.
Servicing Your Air Bag-Equipped Vehicle Air bags affect how your vehicle should be serviced.