Download PDF Manual

then set Shuffle Songs to On.


Fast Forward and Rewind Press and hold l SEEK or g SEEK to fast forward or rewind within the current track.


Cadillac SRX Owner Manual - 2010


Black plate (23,1)


Playing an MP3 CD or DVD Files that are not stored in folders are displayed in the root directory (disc). The search rate increases if the MENU/SELECT knob is continuously turned while searching in a list.


Selecting an MP3 Track Using the control buttons: . Press g SEEK or l SEEK to select the previous or next track. Turn the TUNE knob.


Using the CD or DVD Menu: 1. Turn the MENU/SELECT knob. 2. Select Folder List. 3. Select the folder. 4. Select the track.


Searching for MP3s on a CD or DVD It is normal for the search feature to take some time to display the information after reading the disc due to the amount of information stored on the disc. The infotainment system automatically switches to FM while the disc is being read. Files that do not have any meta data stored in the ID3 tag display as Unknown. Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Genres The number of objects in each category is shown in parentheses after the category.


Infotainment System 6-23


To search for tracks: 1. Turn the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,


Song Titles, or Genres.


4. Select the track. The search rate


increases if the menu knob is continuously turned while searching in a list.


Playing MP3 Tracks in Random Order Turn the MENU/SELECT knob and then set Shuffle Songs to On. Recording an Audio or MP3 CD to MEM See Mass Storage Media (MEM) on page 6‑25 for more information.


Cadillac SRX Owner Manual - 2010


Black plate (24,1)


6-24


Infotainment System


Playing a DVD‐V See Rear Seat Entertainment (RSE) System on page 6‑36 for information about how to control a Video DVD using the wireless remote control.


Selecting a Chapter Using the control buttons: . Press g SEEK or l SEEK to


select the previous or next chapter. Turn the TUNE knob.


Using DVD Menu: 1. Turn the MENU/SELECT knob. 2. Select Chapter List. 3. Select the chapter.


Selecting a Title 1. Turn the MENU/SELECT knob. 2. Select Title List. 3. Select the title.


Changing the Audio Stream 1. Turn the MENU/SELECT knob. 2. Select Audio Stream. 3. Select Change Audio Stream. 4. Press MENU/SELECT to change


the selection.


Select Cancel to exit the menu.


Pausing a DVD 1. Turn the MENU/SELECT knob. 2. Select Pause, to pause the disc.


Select unpause to start playback.


Navigating the DVD‐V Disc Menu Use the following actions to navigate the title menu on a DVD‐V Disc. . Select / Enter . Cursor UP . Cursor DOWN


. Cursor RIGHT . Cursor LEFT . Up Menu Use the following actions to navigate the menu on a DVD‐V Disc while playing chapters. . Pause (Play) . Chapter List


Title List


. DVD/DVD — DVD on both


video screens


. DVD/AUX — Left video


screen / Right AUX input


. AUX/DVD — Left AUX


input / Right video screen


. AUX/AUX — AUX input on


both video screens To navigate the menu: 1. Turn the MENU/SELECT knob. 2. Select the action.


Cadillac SRX Owner Manual - 2010


Black plate (25,1)


Mass Storage Media (MEM) Infotainment systems with MEM storage are able to record up to 1.1 GB (gigabyte) of music from Audio CDs, MP3/WMA/AAC discs, and USB storage devices. The MEM player can also time shift audio from AM, FM, and XM™ radio. Music or content that is stored in MEM that you did not create, or have the right to distribute, must be deleted before the sale or end of the lease of the vehicle. Control Buttons The buttons used to control the MEM player are: MEM/DVD/AUX: Press to select the MEM player. l SEEK/ g SEEK : Press to select tracks or to fast forward or rewind within a track.


INFO: Press to display additional information about the MEM track that may be available. Turn to select tracks. k : Press to pause the track currently playing, press again to resume playback. O REC: Press to record music from a CD or USB drive. DEL: Press to delete the current track from MEM. FAV (Favorites): Press to display MEM favorites. 1 to 6: Press to select a track or playlist stored in that numeric position. Recording From Audio CDs The infotainment system can record the current song playing or all songs from an audio CD to MEM. A status bar appears on the top of the display when the recording process starts and disappears when the process has ended. Copy protected CDs cannot be recorded to MEM.


Infotainment System 6-25


Recording to MEM Press O REC, then select “Record Current Song” or “Record All Songs on Disc”. If the track has started playing, the system will restart the track and begin recording from the beginning of the track. When the song recording is completed, the message “Song Recorded to MEM” displays, and there may be a slight pause. Songs recorded to MEM are stored as the current date, disc and track number.


Re-recording a Previously Recorded Disc If the disc or track has already been recorded to MEM, the message “The Song(s) is Already Recorded” displays.


Cadillac SRX Owner Manual - 2010


Black plate (26,1)


6-26


Infotainment System


Stopping the Recording Press the O REC button while recording from an audio CD to display the stop recording option. Select “Stop Recording Song to MEM”.


Renaming Recorded Discs Discs that have been recorded to MEM can be renamed. 1. Turn the MENU/SELECT knob. 2. Select Rename Recorded Discs. 3. Select the disc. 4. Select Album or Artist to rename


either one.


5. Use the menu knob to enter the


character sequence. See Operation on page 6‑7 for more information.


Recording From MP3/WMA Discs or USB Storage Devices


USB Host Support The USB connector uses the USB standards, 1.1 and 2.0.


USB Supported Devices . USB Flash Drives . Portable USB Hard Drives


Recording to MEM Press O REC, then select “Record Current Song” or “ Record All Songs on Disc”. The information stored by MEM is titled according to the ID3 tag associated with it.


Re-recording a Previously Recorded Disc If the disc or track has already been recorded to MEM the message “The Song(s) is Already Recorded” displays.


Stopping the Recording Press the O REC button while recording from an MP3/WMA CD or USB storage device to display the stop recording option. Select “Stop Recording Song to MEM” Deleting Tracks From MEM Individual tracks and all tracks can be deleted from MEM. To delete individual tracks, press and release the DEL button while the track is playing. To delete all tracks from MEM, press and hold the DEL button while a track is playing.


Cadillac SRX Owner Manual - 2010


Black plate (27,1)


Playing From MEM


Playing Back a Previously Recorded CD Turn the TUNE knob to select a track if MEM is already playing from the previously recorded disc. 1. Select Recorded Disc List. 2. Select the disc. 3. Select the track.


Searching For a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Genres


The number of objects in each category is shown in parentheses after the category. To search for tracks: 1. Turn the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,


Song Titles, or Genres.


4. Select the track. The search rate increases if the MENU/SELECT knob is continuously turned while searching in a list.


Shuffle Songs Select the Shuffle Songs option from the MEM menu to randomly play back tracks stored in MEM.


Infotainment System 6-27


Configuring MEM Favorites During MEM playback, press the FAV button to change between favorite categories. The favorite categories are: . Playlists . Artists . Albums . Genres To remove MEM favorites categories: 1. Press the CONFIG button. 2. Select Radio Settings. 3. Select MEM Favorites. 4. Remove the check mark from the box to remove that MEM favorites category.


Replace the check mark to re-add the removed category.


Cadillac SRX Owner Manual - 2010


Black plate (28,1)


6-28


Infotainment System


Saving MEM Tracks as Favorites Favorites can be saved by pressing and holding one of the 1 to 6 buttons. Favorites can be stored according to the following list: Playlist: Adds currently playing track to the playlist selected. Artist: Saves the artist associated with the currently playing track in the indicated favorites position. Album: Saves the album associated with the currently playing track in the indicated favorites position. Genre: Saves the genre associated with the currently playing track in the indicated favorites position.


Creating Playlists To create a playlist using tracks stored in MEM: 1. Select Playlist from the MEM


favorites.


2. Select the track to be stored in


the playlist.


3. Press and hold one of


the 1 to 6 buttons until the track can be heard again to store the track.


4. Repeat steps 1 though 3 to store


additional tracks in the playlist.


Auxiliary Devices (Radio with CD ) The optional AUX input allows portable devices to connect to the vehicle using the 3.5 mm (1/8 in) input jack, the USB port or Bluetooth® wireless technology, if equipped. Portable devices are controlled by using the menu system described in Operation on page 6‑7.


The AUX input is located in the center console.


Cadillac SRX Owner Manual - 2010


Black plate (29,1)


3.5 mm Auxiliary Input Jack Connect a 3.5 mm (1/8 in) cable to the 3.5 mm auxiliary input jack to use a portable audio player. Playback of an audio device that is connected to the 3.5 mm auxiliary input jack can only be controlled using the controls on the device.


Adjusting the Volume Turn the VOL/ O knob to adjust the volume of the infotainment system after the volume level has been set on the portable audio device. USB Port For vehicles with a USB port, the following devices may be connected and controlled by the infotainment system.


iPods


. PlaysForSure Devices (PFD) . USB Drives


Zunes


Not all iPods, PFDs, USB Drives, and Zunes are compatible with the infotainment system. Connecting and Controlling an iPod™ Not all iPod's can be controlled by the infotainment system.


Connecting an iPod Connect the iPod to the USB port.


Searching For a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres . Audiobooks . Composers


Infotainment System 6-29


To search for tracks: 1. Turn the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,


Song Titles, Podcasts, Genres, Audiobooks, or Composers.


4. Select the track.


Shuffle Turn the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off, then press the 0 BACK button to return the main screen. On: Plays tracks in the current folder in random order. Off: Plays tracks in the current folder in sequential order.


Repeat Turn the MENU/SELECT knob and set Repeat to On or Off, then press the 0 BACK button to return the main screen.


Cadillac SRX Owner Manual - 2010


Black plate (30,1)


6-30


Infotainment System


On: Repeats the current track. Off: Playback starts from the beginning of the current track after the last track finishes. Connecting and Controlling a PlaysForSure Device (PFD) or Zune™


Connecting a PFD or Zune Connect the PFD or Zune to the USB port.


Searching For a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres


To search for tracks: 1. Turn the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,


Song Titles, Podcasts, or Genres.


4. Select the track.


Shuffle Functionality Turn the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order. Off: Plays current tracks in sequential order.


Repeat Functionality Turn the MENU/SELECT knob and set Repeat to On or Off. Repeat On: Repeats the current track. Repeat Off: Playback starts from the beginning of the current track after the last track finishes.


Connecting and Controlling a USB Drive The infotainment system can only play back .mp3 and .wma files from a USB drive. Only the first 2,500 songs are recognized on the device. When a device is not supported, the message “No supported data found. You can safely disconnect the device” appears.


Connecting a USB Drive Connect the USB drive to the USB port.


Searching For a Track It is normal for the search feature to take some time to display the information after reading the device due to the amount of information stored. Files that do not have any meta data stored in the ID3 tag display as Unknown.


Cadillac SRX Owner Manual - 2010


Black plate (31,1)


Tracks can be searched for by: . Playlists* . Artists . Albums . Song Titles . Genres


Folder View


*This only displays if a playlist is found on the device. To search for tracks: 1. Turn the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,


Song Titles, Genres, or Folder View. 4. Select the track.


Infotainment System 6-31


Shuffle Functionality Turn the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order. Off: Plays current tracks in sequential order.


Repeat Functionality Turn the MENU/SELECT knob and set Repeat to On or Off. Repeat On: Repeats the current track. Repeat Off: Playback starts from the beginning of the current track after the last track finishes.


Connecting a Bluetooth® Device Before a Bluetooth device can be connected to the infotainment system, it must first be paired to the system. Not all Bluetooth devices can be paired to the infotainment system. Before pairing the Bluetooth device, become familiar with its user guide for Bluetooth functions. The system only connects to Bluetooth devices that support A2DP (Advanced Audio Distribution Profile) version 1.2. A Bluetooth phone with MP3
capability can not be paired to the vehicle as a phone and an MP3
player at the same time.


Cadillac SRX Owner Manual - 2010


Black plate (32,1)


6-32


Infotainment System


Pairing Information: . Up to five devices can be paired


to the system. The pairing process is disabled when the vehicle is moving. The infotainment system automatically links with the first available paired device in the order the device was paired.


. Only one paired device can be connected to the infotainment system at a time.


. Pairing should only need to be


completed once, unless changes to the pairing information have been made or the device is deleted.


Bluetooth Setup Menu The Bluetooth Setup menu can be accessed with or without a device attached to the USB port. To select the Bluetooth Setup menu when a device is attached to the USB port and active: 1. Turn the MENU/SELECT knob while in the iPod, Zune, PFD, or USB device main menu.


2. Select Bluetooth Music Setup. To select the Bluetooth Music Setup menu when a device is not attached to the USB port, or when a device is attached to the USB port but not active: 1. Press the AUX button until AUX


is the active source.


2. Turn the MENU/SELECT knob. 3. Select Bluetooth Music Setup.


To select the Bluetooth Music Setup menu when a Bluetooth device is connected and active: 1. Turn the MENU/SELECT knob. 2. Select Bluetooth Music Setup.


Pairing a Device 1. Select Connect To New Device


from the Bluetooth Music Setup menu.


2. The system asks a series of


Yes/No questions to determine what type of device is being paired.


3. After the system determines


what type of Bluetooth device is being paired, the Bluetooth device will need to be put into discovery mode.


Cadillac SRX Owner Manual - 2010


Black plate (33,1)


4. Some devices may require a


PIN number in order to complete the pairing process. Locate the device named “GMusicConnect” in the list on the Bluetooth device and follow the instructions on the device to enter the four digit PIN number provided by the infotainment system.


Connecting to a Device Once a device is paired to the infotainment system, it can be connected to the infotainment system. To connect a paired device when no other device is connected to the infotainment system: 1. Select the Select Device option


from the Bluetooth Music Setup menu.


2. Select the new device.


To connect a paired device when another device is connected to the infotainment system: 1. Select the Select Device option


from the Bluetooth Music Setup menu.


2. Select the new device. 3. The active device is


disconnected from the system and the new device is connected.


Removing a Device 1. Select Remove Device from the


Bluetooth Music Setup menu.


2. Select the device. 3. The device is removed from the


system.


Before connecting to the removed device again, it will need to paired to the infotainment system.


Infotainment System 6-33


Changing the Default PIN To change the default PIN: 1. Select Change Default PIN from


the Bluetooth Music Setup menu.


2. Select one of the pre‐defined


PIN numbers, or select Other to create a PIN. To create a PIN: 1. Select the length of the PIN


number.


2. Enter the character sequence.


Messages The following messages may appear on the infotainment screen. Poor Bluetooth Signal Quality: This message displays when the Bluetooth signal strength is low. This Feature is Unavailable While Vehicle is Moving: This message displays when an action is not allowed while the vehicle is moving.


Cadillac SRX Owner Manual - 2010


Black plate (34,1)


6-34


Infotainment System


Controlling a Bluetooth® Device Bluetooth devices that support AVRCP (Audio/Video Remote Control Profile) version 1.0 may be able to be controlled by the infotainment system. Press and release g SEEK / l SEEK to skip tracks. Other Information The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio Frequency Statement on page 12‑17 for FCC information.


Auxiliary Devices (Radio with CD/DVD and MEM) The optional AUX input allows portable devices to be connected using the 3.5 mm (1/8 in) input jack or the USB port. Portable devices are controlled by using the menu system described in Operation on page 6‑7.


The AUX input is located in the center console.


3.5 mm Auxiliary Input Jack Connect a 3.5 mm (1/8 in) cable to the 3.5 mm auxiliary input jack to use a portable audio player. Playback of an audio device that is connected to the 3.5 mm auxiliary input jack can only be controlled using the controls on the device.


Adjusting the Volume Turn the VOL/ O knob to adjust the volume of the infotainment system after the volume level has been set on the portable audio device. USB Port The following devices may be connected to the USB port and controlled by the infotainment system.


iPods


. USB Mass Storage Devices Not all iPods or USB Mass Storage Devices are compatible with the infotainment system.


Cadillac SRX Owner Manual - 2010


Black plate (35,1)


Connecting and Controlling an iPod™ Not all iPod's can be controlled by the infotainment system.


Connecting an iPod Connect the iPod to the USB port.


Selecting a Track Using the control buttons: . Press g SEEK or l SEEK to select the previous or next track. Turn the TUNE knob to select a track in the current sub menu. The track will start to play.


Playing Tracks in Random Order Turn the MENU/SELECT knob and set Shuffle Songs to On or Off. Shuffle On: Plays current tracks in random order. Shuffle Off: Plays current tracks in sequential order.


Searching For a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Genres . Composers . Audiobooks The number of objects in each category is shown in parentheses after the category. To search for tracks: 1. Turn the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,


Song Titles, Genres, Composers, or Audiobooks.


4. Select the track. The search rate increases if the MENU/SELECT knob is continuously turned while searching in a list.


Infotainment System 6-35


Connecting and Controlling a USB Drive Files that are not stored in folders are displayed in the root directory (USB).


Connecting a USB Drive Connect the USB drive to the USB port.


Disconnecting a USB Drive A USB drive should be ejected from the USB port before disconnecting it. To eject a USB drive: 1. Turn the MENU/SELECT knob. 2. Select USB Eject.


Playing Tracks in Random Order Turn the MENU/SELECT knob and then set Shuffle Songs to On.


Cadillac SRX Owner Manual - 2010


Black plate (36,1)


6-36


Infotainment System


Selecting a Track Using the control buttons: . Press g SEEK or l SEEK to select the previous or next track. Turn the TUNE knob to select a track in the current sub menu. The track will start to play. Selecting a track in a different folder: 1. Turn the MENU/SELECT knob. 2. Select Folder List. 3. Select the folder. 4. Select the track.


Searching for Tracks It is normal for the search feature to take some time to display the information after reading the device due to the amount of information stored. Files that do not have any meta data stored in the ID3 tag display as Unknown.


Tracks can be searched by: . Playlists . Artists . Albums . Song Titles . Genres The number of objects in each category is shown in parentheses after the category. To search for tracks: 1. Turn the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,


Song Titles, or Genres.


4. Select the track. The search rate increases if the MENU/SELECT knob is continuously turned while searching in a list.


Recording Tracks to MEM See Mass Storage Media (MEM) on page 6‑25 for more information.


Rear Seat Infotainment


Rear Seat Entertainment (RSE) System The vehicle may have a DVD Rear Seat Entertainment (RSE) system. The RSE system works with the vehicle's infotainment system. The DVD player is part of the front radio. The RSE system includes a radio with a DVD player, two rear seat video display screens, audio/video jacks, two wireless headphones, and a remote control. See CD/DVD Player on page 6‑21 or the separate navigation system manual for more information on the vehicle's DVD system. Before Driving The RSE is for rear seat passengers only. The driver cannot safely view the video screen while driving.


Cadillac SRX Owner Manual - 2010


Black plate (37,1)


In severe or extreme weather conditions the RSE system may not work until the temperature is within the operating range. The operating range is above −20°C (−4°F) and below 60°C (140°F). If the temperature is outside of this range, heat or cool the vehicle until it is within the operating range. Global Off Depending on the infotainment system, the RSE system may have a Global Off feature. The Global Off feature disables all RSE system features. Press and hold the radio power button for more than three seconds for Global Off to disable the RSE features.


A padlock icon may display on the infotainment screen when the Global Off feature is on. On some infotainment systems, the Global Off feature can be turned off by performing one of the following: . Press and hold the radio power


button for more than three seconds. Insert or eject any disc. Insert a DVD video disc.


. Press the Remote Control power


button.


. Press the MEM/DVD/AUX button


or the k button when a DVD video disc is in the player.


. Press the SRC button on the steering wheel when a DVD video disc is in the player.


. Cycle the ignition.


Infotainment System 6-37


Headphones RSE includes two 2-channel wireless headphones. Channel 1
is dedicated to the DVD player, and Channel 2 is dedicated to RSA selections. The headphones are used to listen to various multi‐media. If the vehicle is not equipped with RSA, then channel 2 is dedicated to any external auxiliary device connected to the rear A/V jacks. The wireless headphones have an On/Off button, channel 1/2 switch, and a volume control. Turn the headphones off when not in use. Push the On/Off button to turn on the headphones. A light on the headphones comes on. If the light does not come on, check the batteries. Intermittent sound or static can also indicate weak batteries. See “Battery Replacement” later in this section for more information.


Cadillac SRX Owner Manual - 2010


Black plate (38,1)


6-38


Infotainment System


Infrared transmitters are on the top of the left seatback video screen. The headphones shut off automatically to save the battery power if the RSE system and RSA are shut off or if the headphones are out of range of the transmitters for more than three minutes. Moving too far forward or stepping out of the vehicle, can cause the headphones to lose the signal or have static. The headphones may automatically turn off after four hours of continuous use. To adjust the volume on the headphones, use the volume control. For best audio performance, the headphones must be worn correctly, with the headband over the top of the head. L (Left) and R (Right) are above the ear pads and are indicators as to how the headphones should be placed on the head.


Notice: Do not store the headphones in heat or direct sunlight. This could damage the headphones and repairs will not be covered by the warranty. Storage in extreme cold can weaken the batteries. Keep the headphones stored in a cool, dry place. If the foam ear pads become worn or damaged, they can be replaced separately from the headphones. See your dealer for more information.


Battery Replacement To change the batteries: 1. Loosen the screw to the battery door located on the left side of the headphones.


2. Slide the battery door open. 3. Replace the two AAA batteries. 4. Replace the battery door and


tighten the screw.


Remove the batteries if the headphones are not going to be used for a long period of time. Audio/Video (A/V) Jacks The A/V jacks may be located on the rear of the floor console. They allow audio or video cables to be connected from an auxiliary device such as a camcorder or a video game system. The A/V jacks are color coded: . Yellow for video input. . White for left audio input. . Red for right audio input. Power for auxiliary devices is not supplied by the radio system. To use the auxiliary inputs of the RSE system: 1. Connect the auxiliary device


cables to the A/V jacks.


2. Power on both the auxiliary device and the RSE video screen.


Cadillac SRX Owner Manual - 2010


Black plate (39,1)


Infotainment System 6-39


The RSE system transmits the audio signal to the wireless headphones if an audio signal is available. See “Headphones” earlier in this section for more information. Audio can be heard from the wired headphone jacks on the RSA system by selecting the desired source from the RSA system, if the vehicle has this feature. The front seat passengers are able to listen to playback from the A/V jacks through the vehicle speakers by selecting Rear A/V as the source on the radio.


Changing the Source on the Video Display Screens The image from the auxiliary device can be switched between the video display screens. To change the display: 1. Press the AUX button on the remote control to change the source of both video screens from the DVD player to the auxiliary device.


2. Press the AUX button a second


time to change the left video screen source to the DVD player and the right video screen to the auxiliary device.


3. Press the AUX button a third time to change the left video screen source to the auxiliary device and the right video screen to the DVD player.


4. Press the AUX button a fourth


time to change the source of both video screens to the DVD player.


How to Change the RSE Video Screen Settings The screen display mode, brightness, and language can be changed from the setup menu using the remote control. To change a setting: 1. Press z. 2. Use n, q, p, o and r select the settings.


3. Press z again to exit the


setup menu. Audio Output Audio from the DVD player or auxiliary inputs can be heard through the following: . Wireless Headphones . Vehicle Speakers . Vehicle wired headphone jacks on the rear seat audio system, if the vehicle has this feature.


Cadillac SRX Owner Manual - 2010


Black plate (40,1)


6-40


Infotainment System


Video Screens The video screens are located in the back of the driver and front passenger seats.


To use the video screen: 1. Push the release button located


on the seatback console.


2. Move the screen to the desired


viewing position.


Push the video screen down into its locked position when it is not in use. The screen turns off automatically. Only the left RSE seatback console contains the infrared transmitters for the wireless headphones, they may be visible as eight illuminated LEDs. These LEDs are not on the right video screen. Both seatback consoles contain an infrared receiver for the remote control. They are located at the top of each console. Notice: Avoid directly touching the video screen, as damage may occur. See “Cleaning the Video Screen” later in this section for more information.


Video Screen Input Jack Each video screen is equipped with a video input jack to allow video cables to be connected from an auxiliary device such as a camcorder or a video game system. This signal will override any video provided by the RSE system; either the DVD or Auxiliary A/V jack source. The RSE system must be on for this input to operate. Remote Control To use the remote control, aim it at the transmitter window at either seatback console and press the button. Direct sunlight or very bright light could affect the ability of the RSE transmitter to receive signals from the remote control. Check the batteries if the remote control does not seem to be working. See “Battery Replacement” later in this section. Objects blocking the line of sight could also affect the function of the remote control.


Cadillac SRX Owner Manual - 2010


Black plate (41,1)


If a CD, DVD, or MP3 disc is in the Radio DVD slot, the remote control O button can be used to turn on the video screen display and start the disc. The infotainment system can also turn on the video screen display. See CD/DVD Player on page 6‑21 or the separate navigation system manual for more information. Notice: Storing the remote control in a hot area or in direct sunlight can damage it, and the repairs will not be covered by the warranty. Storage in extreme cold can weaken the batteries. Keep the remote control stored in a cool, dry place.


Infotainment System 6-41


r (Enter): Press to select the highlighted choice in any menu. z (Display Menu): Press to adjust the brightness, screen display mode, and display the language menu. q (Return): Press to exit the current active menu and return to the previous menu. This button operates only when the display menu or a DVD menu is active. c (Stop): Press to stop playing, rewinding, or fast forwarding a DVD. Press twice to return to the beginning of the DVD. s (Play/Pause): Press to start playing a DVD. Press to pause a DVD while it is playing. Press again to continue playing.


Remote Control Buttons O (Power): Press to turn the video screens on and off. P (Illumination): Press to turn the remote control backlight on. The backlight times out after several seconds if no other button is pressed. v (Title): Press to return to the main menu of the DVD. This function could vary for each disc. y (Main Menu): Press to access the DVD menu. The DVD menu is different on every DVD. Use the navigation arrows to move the cursor. After making a selection press the enter button. This button only operates when using a DVD. n, q , p , o (Menu Navigation Arrows): Use the arrow buttons to navigate through a menu.


Cadillac SRX Owner Manual - 2010


Black plate (42,1)


6-42


Infotainment System


Depending on the infotainment system in the vehicle, DVD playback may be slowed down by pressing s then [. Reverse slow play by pressing s then r. Press s again to cancel slow play. t (Previous Track/Chapter): Press to go to the start of the current track or chapter. Press again to go to the previous track or chapter. This button may not work when the DVD is playing the copyright information or the previews. u (Next Track/Chapter): Press to go to the beginning of the next chapter or track. This button might not work when the DVD is playing the copyright information or the previews.


r (Fast Reverse): Press to quickly reverse the DVD or CD. To stop fast reversing a DVD video, press s. To stop fast reversing a DVD audio or CD, release r. This button might not work when the DVD is playing the copyright information or the previews. [ (Fast Forward): Press to fast forward the DVD or CD. To stop fast forwarding a DVD video, press s. To stop fast forwarding a DVD audio or CD, release [. This button might not work when the DVD is playing the copyright information or the previews. e (Audio): Press to change audio tracks on DVDs that have this feature when the DVD is playing. { (Subtitles): Press to turn ON/OFF subtitles and to move through subtitle options when a DVD is playing.


AUX (Auxiliary): Press to switch the video displays between the DVD player and an auxiliary source. d (Camera): Press to change the camera angle on DVDs that have this feature when the DVD is playing. \ (Clear) (If Available): Press this button within three seconds after inputting a numeric selection, to clear all numeric inputs. } 10 (Double Digit Entries) (If Available): Press this button to select chapter or track numbers greater than 9. Press this button before inputting the number. 1 through 0 (Numeric Keypad): The numbered keypad provides the capability of direct chapter or track number selection.


Cadillac SRX Owner Manual - 2010


Black plate (43,1)


Replacing the Remote Control If the remote control becomes lost or damaged, a new universal remote control can be purchased. Use a Toshiba® code set for replacement universal remote controls.


Battery Replacement To change the remote control batteries: 1. Slide back the rear cover on the


remote control.


2. Replace the two batteries in the


compartment.


3. Replace the battery cover. Remove the batteries from the remote control if unused for an extended period of time.


Infotainment System 6-43


Tips and Troubleshooting Chart


Problem


Recommended Action


No power.


The picture does not fill the screen. There are black borders on the top and bottom or on both sides or it looks stretched out. In auxiliary mode, the picture moves or scrolls. The remote control does not work.


After stopping the player, I push Play but sometimes the DVD starts where I left off and sometimes at the beginning.


The ignition might not be turned ON/RUN or in ACC/ACCESSORY. Check the display mode settings in the setup menu by pressing the display menu button on the remote control. Check the auxiliary input connections at both devices. Check to make sure there is no obstruction between the remote control and the transmitter window. Check the batteries to make sure they are not dead or installed incorrectly. If the stop button was pressed one time, the DVD player resumes playing where the DVD was stopped. If the stop button was pressed two times the DVD player begins to play from the beginning of the DVD.


Cadillac SRX Owner Manual - 2010


Black plate (44,1)


6-44


Infotainment System


Tips and Troubleshooting Chart (cont'd) Problem


Recommended Action


The auxiliary source is running but there is no picture or sound.


Sometimes the wireless headphone audio cuts out or buzzes.


I lost the remote and/or the headphones. The DVD is playing, but there is no picture or sound.


Check that the RSE video screen is in the auxiliary source mode by pressing the AUX button on the remote control. Check the auxiliary input connections at both devices. Check for obstructions, low batteries, reception range, and interference from cellular telephone towers or by using a cellular telephone in the vehicle. Check that the headphones are on correctly using the L (left) and R (right) on the headphones. Check that the headphones are positioned properly with the headband across the top of the head. See your dealer for assistance.


Check that the RSE video screen is sourced to the DVD player by pressing the AUX button on the remote control.


DVD Display Error Messages The DVD display error message depends on which radio the vehicle has. The video screen may display one of the following: Disc Load/Eject Error or Mechanical Error: There are disc load or eject problems. Disc Format Error or Unknown Format: The disc is inserted with the disc label wrong side up, or if the disc is damaged. Disc Region Error or Disc Error: The disc is not from a correct region. No Disc Inserted: No disc is present when the Z EJECT or MEM/DVD/AUX button is pressed on the radio.


Cadillac SRX Owner Manual - 2010


Black plate (45,1)


Rear Seat Audio (RSA) System Vehicles with this feature allow the rear seat passengers to listen to and control any of the music sources: radio, CDs, DVDs, or other auxiliary sources. RSA can only control music sources that the front seat passengers are listening to, except on radios where dual control is allowed. RSA can function when the front radio is off. X displays on the infotainment system when RSA is on.


Infotainment System 6-45


Audio can be heard through wired headphones (not included) plugged into the jacks on the RSA. If the vehicle has a Rear Seat Entertainment system with wireless headphones, audio can also be heard on Channel 2 of the wireless headphones. To listen to a portable audio device through the RSA, attach the portable audio device to the auxiliary input, if available. Turn the device on, then choose the front auxiliary input with the RSA SRCE button.


DVD Distortion Video distortion can occur when operating cellular phones, scanners, CB radios, Global Position Systems (GPS)*, two-way radios, mobile fax, or walkie talkies. It might be necessary to turn off the DVD player when operating one of these devices in or near the vehicle. *Excludes the OnStar® System. Cleaning the RSE Seatback Console Use only a clean cloth dampened with clean water to clean the RSE seatback console surface. Cleaning the Video Screens Use only a clean cloth dampened with clean water. Use care when touching or cleaning the screens as damage could result.


Cadillac SRX Owner Manual - 2010


Black plate (46,1)


6-46


Infotainment System


If the front seat passengers are listening to the radio, this function may be inactive on some radios. While listening to a disc, press ¨ to go to the next track or chapter on the disc. Press © to go back to the start of the current track or chapter if more than ten seconds have played. If the front seat passengers are listening to a disc, this function may be inactive on some radios. Press and hold © or ¨ to fast reverse or fast forward. When a DVD video menu is being displayed, press © or ¨ to cursor up or down on the menu. Hold © or ¨ to cursor left or right on the menu. PROG (Program): Press to go to the next preset radio station or channel set on the main radio. If the front seat passengers are listening to the radio, this function may be inactive on some radios.


P (Power): Press to turn the RSA on or off. Volume: Turn to increase or decrease the volume of the wired headphones. The left knob controls the left headphones and the right knob controls the right. Use the volume control on headphones for wireless headphones. SRCE (Source): Press to select between the radio, CD, and if these features are available: DVD, front or rear auxiliary, HDD, USB. The front radio may override the rear selection as required.


© ¨ (Seek): While listening to the radio, press to go to the previous or to the next station and stay there. If the front seat passengers are listening to the radio, this function may be inactive on some radios. Press and hold © or ¨ until “Tune” displays. Continue to press © or ¨ to tune to an individual station. Tune stays active until © or ¨ has not been pressed for several seconds.


Cadillac SRX Owner Manual - 2010


Black plate (47,1)


When a CD or DVD audio disc is playing, press PROG to go to the beginning of the disc or display disc info. If the front seat passengers are listening to a disc, this function may be inactive on some radios. When a disc is playing in the CD or DVD changer, press and hold PROG to select the next disc, if multiple discs are loaded. If the front seat passengers are listening to a disc, this function may be inactive on some radios. The PROG button may be used to access the menu of an MP3. Once in the menu, use © or ¨ to make selections. When a DVD video menu is displayed, press PROG, or press and hold PROG to perform the menu function, ENTER.


Phone


Bluetooth (Overview) Vehicles with a Bluetooth system can use a Bluetooth capable cell phone with a Hands Free Profile to make and receive phone calls. The infotainment system and voice recognition are used to control the system. The system can be used while in ON/RUN or ACC/ACCESSORY. The range of the Bluetooth system can be up to 9.1 m (30 ft). Not all phones support all functions and not all phones work with the Bluetooth system. See www.gm.com/bluetooth for more information about compatible phones.


Infotainment System 6-47


Bluetooth Controls Use the buttons located on the infotainment system and the steering wheel to operate the Bluetooth system.


Steering Wheel Controls b / g (Push To Talk) : Press to answer incoming calls, to confirm system information, and to start voice recognition. c / $ (End Call / Mute): Press to end a call, reject a call, or to cancel an operation.


Infotainment System Controls For information about how to navigate the menu system using the infotainment controls, see Operation on page 6‑7 . PHONE: Press to enter the Phone main menu.


Cadillac SRX Owner Manual - 2010


Black plate (48,1)


6-48


Infotainment System


Voice Recognition The voice recognition system uses commands to control the system and dial phone numbers. Noise: The system may not recognize voice commands if there is too much background noise. When to Speak: A tone sounds to indicate that the system is ready for a voice command. Wait for the tone and then speak. How to Speak: Speak clearly in a calm and natural voice. Audio System When using the Bluetooth system, sound comes through the vehicle's front audio system speakers and overrides the audio system. Use the VOL/ O knob during a call to change the volume level. The adjusted volume level remains in memory for later calls. The system maintains a minimum volume level.


Other Information The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio Frequency Statement on page 12‑17 for Federal Communications Commission and Industry Canada Standards information.


Bluetooth (Infotainment Controls) For information about how to navigate the menu system using the infotainment controls, see Operation on page 6‑7 . Pairing A Bluetooth enabled cell phone must be paired to the Bluetooth system first and then connected to the vehicle before it can be used.


See the cell phone manufacturer user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar® Hands‐Free Calling, if available. Refer to the OnStar Owner's Guide for more information. A Bluetooth phone with MP3
capability can not be connected to the vehicle as a phone and an MP3
player at the same time. The pairing process can be started by using the voice recognition system or the controls on the infotainment system. Pairing Information: . Up to five cell phones can be


paired to the Bluetooth system. The pairing process is disabled when the vehicle is moving. The Bluetooth system links with the first available paired cell phone based on the order shown in the device list.


Cadillac SRX Owner Manual - 2010


Black plate (49,1)


Infotainment System 6-49


Listing All Paired and Connected Phones 1. Press the CONFIG button. 2. Select Phone Settings. 3. Select Bluetooth. 4. Select Device List.


Deleting a Paired Phone 1. Press the CONFIG button. 2. Select Phone Settings. 3. Select Bluetooth. 4. Select Device List. 5. Select the phone to delete and follow the on screen prompts.


. Only one paired cell phone can be connected to the Bluetooth system at a time.


. Pairing should only need to be


completed once, unless changes to the pairing information have been made or the phone is deleted.


To link to a different paired phone, see “Linking to a Different Phone” later in this section.


Pairing a Phone 1. Press the CONFIG button. 2. Select Phone Settings. 3. Select Bluetooth. 4. Select Pair Device (Phone).


A four digit PIN number appears on the display. If the “Add new GPS device” option is selected, the system will start a search for Bluetooth “Handsfree” profile devices just like if “Add new Phone” was selected . The additional GPS location feature which would


provide the vehicle's GPS location through the Bluetooth Serial Port Profile is not available.


5. Start the Pairing process on the cell phone that will be paired to the vehicle. Reference the cell phone manufacturers user guide for information on this process. Locate the device named “General Motors” in the list on the cellular phone and follow the instructions on the cell phone to enter the four digit PIN number provided by the system.


6. The system prompts for a name for the phone and confirms the name provided. This name is used to indicate which phone is connected.


7. The system responds with “ has been successfully paired” after the pairing process is complete.


8. Repeat Steps 1 through 7 to pair


additional phones.


Cadillac SRX Owner Manual - 2010


Black plate (50,1)


6-50


Infotainment System


Linking to a Different Phone In order to link to a different phone, the new phone must be in the vehicle and available to be connected to the bluetooth system before the process is started. 1. Press the CONFIG button. 2. Select Phone Settings. 3. Select Bluetooth. 4. Select Device List. 5. Select the new phone to link to


and follow the on screen prompts. If delete is selected, the highlighted phone will be deleted.


Making a Call


Radio with CD 1. Press the PHONE button twice. 2. Enter the character sequence.


See “Entering a Character Sequence” in Operation on page 6‑7 for more information.


3. Select Call to start dialing the


number.


Radio with CD/DVD/MEM 1. Press the PHONE button. 2. Select Enter number. 3. Enter the character sequence.


See “Entering a Character Sequence” in Operation on page 6‑7 for more information.


4. Select Call to start dialing the


number.


Accepting or Declining a Call When an incoming call is received, the infotainment system mutes and a ring tone is heard in the vehicle.


Accepting a Call Turn the MENU/SELECT knob to “Answer” and press the MENU/SELECT knob to accept the call.


Declining a Call Turn the MENU/SELECT knob to “Decline” and press the MENU/SELECT knob to decline the call. Call Waiting Call waiting must be supported on the bluetooth phone and enabled by the wireless service carrier to work.


Cadillac SRX Owner Manual - 2010


Black plate (51,1)


Accepting a Call Turn the MENU/SELECT knob to “Answer” and press the MENU/SELECT knob to accept the call.


Declining a Call Turn the MENU/SELECT knob to “Decline” and press the MENU/ SELECT knob to decline the call.


Switching Between Calls (Call Waiting Calls Only) To switch between calls: 1. Turn or press the


MENU/SELECT knob. 2. Select Switch Call from


the menu.


Conference Calling Conference calling and three way calling must be supported on the bluetooth phone and enabled by the wireless service carrier to work.


To start a conference while in a current call: 1. Turn or press the


MENU/SELECT knob. 2. Select Enter Number. 3. Enter the character sequence


then select call. See “Entering a Character Sequence” in Operation on page 6‑7 for more information.


4. After the call has been placed,


turn or press the MENU/ SELECT knob and choose Merge Calls.


5. To add more callers to the


conference call, repeat steps 1
through 4. The amount of callers that can be added are limited by your wireless service carrier.


Ending a Call Turn or press the MENU/SELECT knob and select Hang Up.


Infotainment System 6-51


Muting a Call


To Mute a Call Turn or press the MENU/SELECT knob and select Mute Call.


To Cancel Mute Turn or press the MENU/SELECT knob and select Mute Call. Dual Tone Multi-Frequency (DTMF) Tones The in‐vehicle Bluetooth system can send numbers during a call. This is used when calling a menu driven phone system. 1. Turn or press the


MENU/SELECT knob and select Enter Number.


2. Enter the character sequence,


see “Entering a Character Sequence” in Operation on page 6‑7 for more information.


Cadillac SRX Owner Manual - 2010


Black plate (52,1)


6-52


Infotainment System


Bluetooth (Voice Recognition)


Pairing A Bluetooth cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See the cell phone manufacturers user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar® Hands‐Free Calling, if available. Refer to the OnStar Owner's Guide for more information. The pairing process can be started by using the voice recognition system or the controls on the infotainment system. A Bluetooth phone with MP3
capability can not be paired to the vehicle as a phone and an MP3
player at the same time.


Pairing Information: . Up to five cell phones can be


paired to the Bluetooth system. The pairing process is disabled when the vehicle is moving. The Bluetooth system links with the first available paired cell phone based on the order shown in the device list.


. Only one paired cell phone can be connected to the Bluetooth system at a time.


. Pairing only needs to be


completed once, unless the pairing information changes or the phone is deleted.


To link to a different paired phone, see Linking to a Different Phone later in this section.


Pairing a Phone 1. Press b / g. The system


responds with a tone. After the tone say “Hands Free”. The system responds “Ready” followed by a tone.


2. Say “Bluetooth”. The system


responds “Bluetooth ready” followed by a tone.


3. Say “Pair”. The system responds with instructions and a four‐digit PIN number. The PIN number will be used in Step 4.


Cadillac SRX Owner Manual - 2010


Black plate (53,1)


Listing All Paired and Connected Phones 1. Press b / g. The system


responds with a tone. After the tone say “Hands Free”. The system responds “Ready” followed by a tone.


2. Say “Bluetooth”. The system


responds “Bluetooth ready” followed by a tone.


3. Say “List”. The system lists all the paired Bluetooth devices. The system will respond “is connected” if a phone is connected to the vehicle.


4. Start the Pairing process on the cell phone that will be paired to the vehicle. Reference the cell phone manufacturers user guide for information on this process. Locate the device named “General Motors” in the list on the cell phone and follow the instructions on the cell phone to enter the four‐digit PIN number that was provided in Step 3.


5. The system prompts for a name for the phone. This name will be used to indicate which phone is connected. The system confirms the name.


6. The system responds with “ has been successfully paired” after the pairing process is complete. 7. Repeat Steps 1 through 7 for


additional phones to be paired.


Infotainment System 6-53


Deleting a Paired Phone 1. Press b / g. The system


responds with a tone. After the tone say “Hands Free”. The system responds “Ready” followed by a tone.


2. Say “Bluetooth”. The system


responds “Bluetooth ready” followed by a tone.


3. Say “Delete”. The system asks which phone to delete followed by a tone.


4. Say the name of the phone to be


deleted. If the phone name is unknown, use the “List” command for a list of all paired phones. The system responds “Would you like to delete ? Yes or No” followed by a tone.


5. Say “Yes” to delete the phone.


The system responds “OK, deleting ”.


Cadillac SRX Owner Manual - 2010


Black plate (54,1)


6-54


Infotainment System


Linking to a Different Phone 1. Press b / g. The system


responds with a tone. After the tone say “Hands Free”. The system responds “Ready” followed by a tone.


2. Say “Bluetooth”. The system


responds “Bluetooth ready” followed by a tone.


3. Say “Change phone”. The


system responds “Please wait while I search for other phones”.


If another phone is found, the response will be “ is now connected”. If another phone is not found, the original phone remains connected.


Storing Name Tags The system can store up to thirty phone numbers as name tags that are shared between the Bluetooth and OnStar systems. The system uses the following commands to store and retrieve phone numbers: . Store . Digit Store . Directory


Using the Store Command The store command allows a phone number to be stored without entering the digits individually. 1. Press b / g. The system


responds with a tone. After the tone say “Hands Free”. The system responds “Ready” followed by a tone.


2. Say “Store”. The system


responds “Store, number please” followed by a tone.


Cadillac SRX Owner Manual - 2010


Black plate (55,1)


3. Say the complete phone number


5. Say a name tag for the phone


to be stored at once with no pauses.


If the system recognizes the number the response is “OK, Storing”. If the system does not recognize the phone number, the response is “Store ”. “Please say yes or no”. If the number is correct, say “Yes”. If the number is not correct, say “No”. The system will ask for the number again.


4. After the system stores the phone number, it responds “Please say the name tag” followed by a tone.


number. The name tag is recorded and the system responds “About to store . Does that sound OK?”. If the name tag does not sound correct, say “No” and repeat Step 5. If the name tag sounds correct, say “Yes” and the name tag is stored. After the number is stored the system returns to the main menu.


Using the Digit Store Command The digit store command allows a phone number to be stored by entering the digits individually. 1. Press b / g. The system


responds with a tone. After the

Loading...
x