Login- Download PDF Manual
-
g : Press to talk or interact with OnStar® and Bluetooth®. See OnStar Overview 0 411 and “Bluetooth” in the infotainment manual. i : Press to decline an incoming call or end a current call. Press to mute or unmute the infotainment system.
S or T : Press the five-way control to the left or right to go to the previous or next area in the display or to the previous or next menu. y or z : Press the five-way control up or down to go up or down in a list. Press to go up or down a page. SEL : Press to select a highlighted menu option. C or B : Press or press and hold to go to the next or previous favorite or seek a station when listening to the radio.
( (Heated Steering Wheel) : If equipped, press to turn the heated steering wheel on or off. A light next to the button displays when the feature is turned on. The steering wheel takes about three minutes to be fully heated.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Horn Press a on the steering wheel pad to sound the horn.
Windshield Wiper/Washer
With the ignition in ACC/ ACCESSORY or ON/RUN/START, move the windshield wiper lever to select the wiper speed. HI : Use for fast wipes. LO : Use for slow wipes.
Instruments and Controls
107
INT (Intermittent Wipes) : Move the lever up to INT for intermittent wipes, then turn the x INT band up for more frequent wipes or down for less frequent wipes. If the windshield wipers are in use for about six seconds while driving, the exterior lamps come on automatically if the exterior lamp controls is in AUTO. See “Lights On with Wipers” under Automatic Headlamp System 0 163. OFF : Use to turn the wipers off. 1X (Mist) : For a single wipe, briefly move the wiper lever down. For several wipes, hold the wiper lever down. Clear snow and ice from the wiper blades and windshield before using them. If frozen to the windshield, carefully loosen or thaw them. Damaged blades should be replaced. See Wiper Blade Replacement 0 319. Heavy snow or ice can overload the wiper motor.
Wiper Parking If the ignition is put in OFF while the wipers are on LO, HI, or INT, they will immediately stop. If the windshield wiper lever is then moved to OFF before the driver door is opened or within 10 minutes, the wipers will restart and move to the base of the windshield. If the ignition is put in OFF while the wipers are performing wipes due to windshield washing, the wipers continue to run until they reach the base of the windshield. Rainsense™ If equipped with Rainsense, a sensor near the top center of the windshield detects the amount of water on the windshield and controls the frequency of the windshield wiper. To turn this feature on or off, see “Rain Sense Wipers” under Vehicle Personalization 0 148. Keep this area of the windshield clear of debris to allow for best system performance.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
108
Instruments and Controls
INT (Rainsense Wipe Sensitivity Control) : When enabled, move the windshield wiper lever to INT. Turn the x INT band on the wiper lever to adjust the sensitivity.
. Turn the band up for more
sensitivity to moisture.
. Turn the band down for less
sensitivity to moisture.
. Move the windshield wiper lever
out of the INT position to deactivate Rainsense.
Wiper Arm Assembly Protection When using an automatic car wash, move the windshield wiper lever to OFF. This disables the automatic Rainsense windshield wipers.
With Rainsense, if the transmission is in N (Neutral) and the vehicle speed is very slow, the wipers will automatically stop at the base of the windshield. The wiper operations return to normal when the transmission is no longer in N (Neutral) or the vehicle speed has increased. n L (Windshield Washer) : Pull the windshield wiper lever toward you to spray windshield washer fluid and activate the wipers. The wipers will continue until the lever is released or the maximum wash time is reached. When the windshield wiper lever is released, additional wipes may occur depending on how long the windshield washer had been activated. See Washer Fluid 0 313 for information on filling the windshield washer fluid reservoir.
{ Warning
In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision.
Headlamp Washer If equipped with headlamp washers, they are located to the side of the headlamps. The headlamps must be on in order to use the headlamp washers. If the headlamps are not on, only the windshield will be washed. Pull the wiper lever toward you and hold briefly to activate. The headlamp washers will spray once, pause, and spray again. The headlamp washers will spray again after five windshield wash cycles. To refill the windshield washer fluid, see Washer Fluid 0 313.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Compass The vehicle may have a compass display on the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak®, and vehicle speed information. The compass system is designed to operate for a certain number of miles or degrees of turn before needing a signal from the GPS satellites. When the compass display shows CAL, drive the vehicle for a short distance in an open area where it can receive a GPS signal. The compass system will automatically determine when a GPS signal is restored and provide a heading again. See Compass Messages 0 137 for the messages that may be displayed for the compass.
Instruments and Controls
109
Clock (Base Radio)
Setting the Clock
Setting the Time To set the time: 1. Select Settings from the Home
Page and select Set Time.
2. Turn the MENU knob to
increase or decrease the hour. 3. Press the MENU knob to go to the next option. Press S BACK to go to the last menu and save the changes.
Auto Set In the Set Time view, touch the area just above the chrome bar and below the Auto Set screen button to turn on/off the Auto Time adjust capability.
Clock (Uplevel Radio) The infotainment system controls are used to access the time and date settings through the menu system. See “Home Page” in the infotainment manual for information about how to use the menu system.
Time To set the time: 1. From the Home Page, touch
the SETTINGS screen button, then touch Time and Date.
2. Touch Set Time, then touch + or − to increase or decrease hours or minutes, and change AM or PM.
3. Touch 12-24 Hr for a 12 or
24 hour clock.
4. Touch [ Back to go back to the
previous menu.
Date To set the date: 1. Touch the SETTINGS screen
button, then touch Time and Date.
2. Touch Set Date, then touch + or − to increase or decrease month, day, or year.
3. Touch [ Back to go back to the
previous menu.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
110
Instruments and Controls
Auto Set When on, the time and date will automatically update. To set auto set: 1. Touch the SETTINGS screen
button, then touch Time and Date.
2. Touch Set Time or Set Date. 3. Touch Auto Set, then select
On-Cell Network or Off-Manual to manually set the time and date.
4. Touch [ Back to go back to the
previous menu.
If auto set is on, the time displayed on the clock may not update immediately when driving into a new time zone.
Clock Display When on, the digital clock will display on the infotainment screen. To set the clock display: 1. Touch the SETTINGS screen
button, then touch Time and Date.
2. Touch Clock Display, then
select Off or On.
3. Touch [ Back to go back to the
previous menu.
Power Outlets The accessory power outlets can be used to plug in electrical equipment, such as a cell phone or MP3 player. The vehicle has two accessory power outlets:
Inside the front storage bin below the climate control system.
. On the rear of the center floor
console.
Lift the cover to access the accessory power outlet. Certain electrical accessories may not be compatible with the accessory power outlet and could overload a vehicle circuit breaker or adapter fuse. If overloaded, the circuit breaker will reset after all devices are disconnected or if Retained Accessory Power (RAP) is
turned off and then back on. See Retained Accessory Power (RAP) 0 235. Wait one minute to allow the circuit breaker to reset before reconnecting devices or turning RAP back on. If the problem continues, the issue could be within your device. Try another known good device to make sure the circuit breaker is operating properly. If this does not resolve your problem, see your dealer. It is possible to replace the factory power outlet with a cigar lighter receptacle, if desired. This requires the factory installed circuit breaker to be replaced with a standard minifuse by the dealer. A minifuse will not reset and will have to be replace if blown.
Caution
Failure to replace the circuit breaker with the minifuse could overheat the cigar lighter and damage the vehicle.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
111
When adding electrical equipment, be sure to follow the proper installation instructions included with the equipment. See Add-On Electrical Equipment 0 289.
Caution
Hanging heavy equipment from the power outlet can cause damage not covered by the vehicle warranty. The power outlets are designed for accessory power plugs only, such as cell phone charge cords.
Always unplug electrical equipment when not in use and do not plug in equipment that exceeds the maximum 20 amps rating. Power Outlet 110/120 Volt Alternating Current If equipped, this power outlet is on the rear of the center floor console. It can be used to plug in electrical equipment that uses a maximum limit of 150 watts.
An indicator light on the outlet turns on to show it is in use. The light comes on when the ignition is in ON/RUN/START, equipment requiring less than 150 watts is plugged into the outlet, and no system fault is detected. The indicator light does not come on when the ignition is in LOCK/OFF or if the equipment is not fully seated into the outlet. If equipment is connected using more than 150 watts or a system fault is detected, a protection circuit shuts off the power supply and the indicator light turns off. To reset the circuit, unplug the item and plug it back in or turn the Retained Accessory Power (RAP) off and then back on. See Retained Accessory Power (RAP) 0 235. The power restarts when equipment using 150 watts or less is plugged into the outlet and a system fault is not detected. The power outlet is not designed for the following and may not work properly, if this equipment is plugged in:
. Equipment with high initial peak
wattage such as: compressor-driven refrigerators and electric power tools.
. Other equipment requiring an extremely stable power supply such as: microcomputer-controlled electric blankets, touch sensor lamps, etc.
. Medical equipment.
Wireless Charging The vehicle may have wireless charging in the storage behind the climate control system. See Instrument Panel Storage 0 102. The system wirelessly charges one PMA or Qi compatible mobile device. To check for phone or other device compatibility:
In the U.S., see my.cadillac.com/ learn. In Canada, see gmtotalconnect.ca.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
112
Instruments and Controls
{ Warning
{ Warning
Wireless charging can affect the operation of an implanted pacemaker or other medical devices. If you have one, it is recommended to consult with your doctor before using the wireless charging system.
The vehicle must be in ON/RUN/ START, ACC/ACCESSORY, or Retained Accessory Power (RAP). The wireless charging feature may not correctly indicate charging when the vehicle is in RAP. See Retained Accessory Power (RAP) 0 235. The operating temperature is −20 °C (−4 °F) to 60 °C (140 °F) for the charging system and 0 °C (32 °F) to 35 °C (95 °F) for the phone.
Remove all metal objects from the charging pad before charging your mobile device. Metal objects, such as coins, keys, rings, or paper clips, between the phone and charging pad will become very hot. On the rare occasion that the charging system does not detect a metal object, and the object gets wedged between the phone and charger, remove the phone and allow the metallic object to cool before removing it from the charging pad, to prevent burns.
To charge a mobile device: 1. Open the climate control
system panel.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
113
2. Remove all objects from the
charging pad. The system may not charge if there are any objects on the charging pad. 3. Place the mobile device face up on the @ symbol on the charging pad.
4. The ~ will display on the V
on the infotainment screen. This indicates that the mobile device is properly positioned and charging. If a phone is placed on the charging pad and ~ does not display, remove the phone from the pad, and wait three seconds before placing/aligning the phone on the pad again.
Keep the storage door closed while driving.
Warning Lights, Gauges, and Indicators Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges could prevent injury. Some warning lights come on briefly when the engine is started to indicate they are working. When one of the warning lights comes on and stays on while driving, or when one of the gauges shows there may be a problem, check the section that explains what to do. Waiting to do repairs can be costly and even dangerous.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
114
Instruments and Controls
Instrument Cluster
English with Auto Stop Shown, Metric Similar
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
115
English V-Series Shown, Metric Similar
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
116
Instruments and Controls
Cluster Application Displays The cluster has three interactive display zones. Use the five-way control on the right steering wheel control to move between the different display zones and scroll through the different displays. The left and right zones display Driver Information Center (DIC) information. See Driver Information Center (DIC) 0 130. The center zone displays application information for the digital speedometer, navigation, audio, phone, efficiency gauge, best fuel economy, or options.
Digital Speedometer While the digital speedometer is displayed, press SEL to select speed limit information.
Navigation If there is no active route, a compass will be displayed. If there is an active route, press SEL to end route guidance or turn the voice prompts on or off.
Audio While the Audio application page is displayed, press SEL to enter the Audio menu. In the Audio menu search for music, select from favorites, or change the audio source.
Phone While the Phone application page is displayed, press SEL to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls, select from favorites, or scroll through contacts. If there is an active call, mute the phone or switch to handset operation.
Driver Efficiency Gauge If equipped, this gauge is a guide to driving in an efficient manner by keeping the ball green and in the center of the gauge. Hard braking or acceleration causes the ball to travel away from the center of the gauge.
Best Fuel Economy This page displays average fuel economy, the best fuel economy over the selected distance, and a bar graph showing instantaneous fuel economy.
Options Press SEL while the Options application page is displayed to enter the Options menu. Units : Press SEL while Units is highlighted to enter the Units menu. Choose English or metric units by pressing SEL while the desired item is highlighted. A checkmark will be displayed next to the selected item. Info Pages : Press SEL while Info Pages is highlighted to select the items to be displayed in the DIC information displays. See Driver Information Center (DIC) 0 130. Fav Button Options : Press SEL while Fav Button Options is highlighted to select between FAV Primary and SEEK Primary. This selection allows for configuration of the C and B steering wheel controls. When FAV Primary is
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
117
selected, pressing C and B will go to the next or previous favorite and pressing and holding C and B will seek. When SEEK Primary is selected, pressing C and B will seek and pressing and holding C and B will go to the next or previous favorite. Tire Loading (If Equipped) : Press SEL while Tire Loading is highlighted to change the tire loading setting. Choose Light (for comfort pressure up to three people), Eco (for Eco pressure up to three people), or Max (for full loading) by pressing SEL while the desired item is highlighted. Open Source Software : Press SEL while Open Source Software is highlighted to display open source software information.
Speedometer The speedometer shows the vehicle's speed in either kilometers per hour (km/h) or miles per hour (mph).
Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles.
Trip Odometer The trip odometer shows how far the vehicle has been driven since the trip odometer was last reset. The trip odometer is accessed and reset through the Driver Information Center (DIC). See Driver Information Center (DIC) 0 130.
Tachometer The tachometer displays the engine speed in revolutions per minute (rpm). For vehicles with the Stop/Start system, when the ignition is in ON/ RUN, the tachometer indicates the vehicle status. When pointing to AUTO STOP, the engine is off but the vehicle is on and can move. The engine could auto start at any time. When the indicator points to OFF, the vehicle is off.
When the engine is on, the tachometer will indicate the engine’s revolutions per minute (rpm). The tachometer may vary by several hundred rpm’s, during auto stop mode, when the engine is shutting off and restarting. A slight bump may be felt when the transmission is determining the most fuel efficient operating range.
Caution
If the engine is operated with the rpm’s in the warning area at the high end of the tachometer, the vehicle could be damaged, and the damage would not be covered by the vehicle warranty. Do not operate the engine with the rpm’s in the warning area.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
118
Instruments and Controls
Fuel Gauge
When the ignition is on, the fuel gauge indicates about how much fuel is left in the tank. There is an arrow near the fuel gauge pointing to the side of the vehicle the fuel door is on. When the indicator nears empty, the low fuel light comes on. There still is a little fuel left, but the vehicle should be refueled soon.
Engine Coolant Temperature Gauge
Metric
Here are four things that some owners ask about. None of these show a problem with the fuel gauge: . At the service station, the fuel
pump shuts off before the gauge reads full. It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it actually took a little more or less than half the tank's capacity to fill the tank.
. The gauge moves a little while
turning a corner or speeding up. . The gauge takes a few seconds
to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
119
When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving. If the driver safety belt is buckled, neither the light nor the chime comes on. Passenger Safety Belt Reminder Light There is a passenger safety belt reminder light near the passenger airbag status indicator. See Passenger Sensing System 0 77.
When the vehicle is started, this light flashes and a chime may come on to remind passengers to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle continues several times if the passenger remains or becomes unbuckled while the vehicle is moving. If the passenger safety belt is buckled, neither the chime nor the light comes on. The front passenger safety belt reminder light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the reminder light and/or chime, remove the object from the seat or buckle the safety belt.
English
This gauge measures the temperature of the vehicle's engine. While driving under normal operating conditions, if the needle moves into the shaded area, the engine is too hot. Pull off the road, stop the vehicle, and turn off the engine as soon as possible.
Safety Belt Reminders
Driver Safety Belt Reminder Light There is a driver safety belt reminder light on the instrument cluster.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
120
Instruments and Controls
Airbag Readiness Light This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), the passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System 0 71.
The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately.
{ Warning
If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.
If there is a problem with the airbag system, a Driver Information Center (DIC) message may also come on. See Airbag System Messages 0 145.
Passenger Airbag Status Indicator The vehicle has a passenger sensing system. See Passenger Sensing System 0 77 for important safety information. The passenger airbag status indicator is in the overhead console.
United States
Canada and Mexico
When the vehicle is started, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off for several seconds as a system check. Then, after several more seconds, the status indicator will light either ON or OFF, or the on or off symbol to let you know the status of the front outboard passenger frontal airbag and knee airbag. If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the front
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
121
outboard passenger frontal airbag and knee airbag are allowed to inflate. If the word OFF or the off symbol is lit on the airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag and knee airbag. If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service.
{ Warning
If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light 0 120 for more information, including important safety information.
Charging System Light
The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working. It should go out when the engine is started. If the light stays on, or comes on while driving, there may be a problem with the electrical charging system. Have it checked by your dealer. Driving while this light is on could drain the battery. When this light comes on, or is flashing, the Driver Information Center (DIC) also displays a message. See Battery Voltage and Charging Messages 0 136.
If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio and air conditioner.
Malfunction Indicator Lamp (Check Engine Light) This light is part of the vehicle’s emission control on-board diagnostic system. If this light is on while the engine is running, a malfunction has been detected and the vehicle may require service. The light should come on to show that it is working when the ignition is in Service Only Mode. See Ignition Positions 0 230.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
122
Instruments and Controls
Malfunctions are often indicated by the system before any problem is noticeable. Being aware of the light and seeking service promptly when it comes on may prevent damage.
Caution
If the vehicle is driven continually with this light on, the emission control system may not work as well, the fuel economy may be lower, and the vehicle may not run smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.
Caution
Modifications to the engine, transmission, exhaust, intake, or fuel system, or the use of replacement tires that do not meet the original tire specifications, can cause this light to come on. This could lead to costly repairs not covered by the
(Continued)
Caution (Continued)
vehicle warranty. This could also affect the vehicle’s ability to pass an Emissions Inspection/ Maintenance test. See Accessories and Modifications 0 291.
If the light is flashing : A malfunction has been detected that could damage the emission control system and increase vehicle emissions. Diagnosis and service may be required. To help prevent damage, reduce vehicle speed and avoid hard accelerations and uphill grades. If towing a trailer, reduce the amount of cargo being hauled as soon as possible. If the light continues to flash, find a safe place to park. Turn the vehicle off and wait at least 10 seconds before restarting the engine. If the light is still flashing, follow the
previous guidelines and see your dealer for service as soon as possible. If the light is on steady : A malfunction has been detected. Diagnosis and service may be required. Check the following: . For vehicles without the capless fuel system, a loose or missing fuel cap may cause the light to come on. See Filling the Tank 0 280. A few driving trips with the cap properly installed may turn the light off.
. For vehicles with the capless fuel system, if fuel has been added to the vehicle using the capless funnel adapter, make sure that it has been removed. See “Filling the Tank with a Portable Gas Can” under Filling the Tank 0 280. The diagnostic system can detect if the adapter has been left installed in the vehicle, allowing fuel to evaporate into the atmosphere.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
A few driving trips with the adapter removed may turn off the light.
. Poor fuel quality can cause
inefficient engine operation and poor driveability, which may go away once the engine is warmed up. If this occurs, change the fuel brand. It may require at least one full tank of the proper fuel to turn the light off. See Fuel 0 279.
If the light remains on, see your dealer. Emissions Inspection and Maintenance Programs If the vehicle requires an Emissions Inspection/Maintenance test, the test equipment will likely connect to the vehicle's Data Link Connector (DLC).
Instruments and Controls
123
The DLC is under the instrument panel to the left of the steering wheel. Connecting devices that are not used to perform an Emissions Inspection/Maintenance test or to service the vehicle may affect vehicle operation See Add-On Electrical Equipment 0 289. See your dealer if assistance is needed. The vehicle may not pass inspection if: . The light is on when the engine
is running.
. The light does not come on
when the ignition is in Service Only Mode.
. Critical emission control systems
have not been completely diagnosed. If this happens, the vehicle would not be ready for inspection and might require several days of routine driving before the system is ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down, or if the vehicle has been recently serviced.
See your dealer if the vehicle will not pass or cannot be made ready for the test.
Brake System Warning Light The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working. If the warning light comes on, there is a brake problem. Have the brake system inspected right away.
Metric
English
This light should come on briefly when the engine is started. If it does not come on then, have it fixed so it will be ready to warn you if there is a problem.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
124
Instruments and Controls
If the light comes on and stays on, there is a brake problem. { Warning
The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.
Parking Brake Light
Metric
English
This light comes on when the parking brake is applied. If the light continues flashing after the parking brake is released, or while driving,
there is a problem with the Electric Parking Brake system or another system. A message may also display in the Driver Information Center (DIC). See Brake System Messages 0 136. If the light does not come on, or remains flashing, see your dealer.
Service Electric Parking Brake Light
be driven, but should be taken to a dealer as soon as possible. See the information for the Electric Parking Brake under Parking Brake (Electric) 0 246 or Parking Brake (Manual) 0 248. If a message displays in the Driver Information Center (DIC), see Brake System Messages 0 136.
Antilock Brake System (ABS) Warning Light
This light should come on briefly when starting the vehicle. If it does not come on, have it fixed so it will be ready to warn if there is a problem. If this light stays on, there is a problem with the Electric Parking Brake system or another system on the vehicle that is causing the parking brake system to work at a reduced level. The vehicle can still
This light comes on briefly when the engine is started. If the light does not come on, have it fixed so it will be ready to warn if there is a problem. If the light comes on while driving, stop as soon as it is safely possible and turn off the vehicle. Then start the engine again to reset the system. If the ABS light stays on,
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
125
or comes on again while driving, the vehicle needs service. A chime may also sound when the light comes on steady. If the ABS light is the only light on, the vehicle has regular brakes, but the antilock brakes are not functioning. If both the ABS and the brake system warning light are on, the vehicle's antilock brakes are not functioning and there is a problem with the regular brakes. See your dealer for service. See Brake System Warning Light 0 123 and Brake System Messages 0 136.
Lane Keep Assist (LKA) Light
If available, this light comes on briefly while starting the vehicle. If it does not come on, have the vehicle serviced. This light is green if LKA is available to assist. LKA may assist by gently turning the steering wheel if the vehicle approaches a detected lane marking without using the turn signal in that direction. The LKA light will turn amber. This light is amber and flashes as a Lane Departure Warning (LDW) alert, to indicate that the lane marking has been crossed. See Lane Keep Assist (LKA) 0 277.
Vehicle Ahead Indicator
If equipped, this indicator will display green when a vehicle is detected ahead and amber when you are following a vehicle ahead much too closely. See Forward Collision Alert (FCA) System 0 270.
Traction Off Light
This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off. The traction off light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/StabiliTrak button.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
126
Instruments and Controls
This light and the StabiliTrak OFF light come on when StabiliTrak is turned off. If the TCS is off, wheel spin is not limited. Adjust driving accordingly. See Traction Control/Electronic Stability Control 0 249.
StabiliTrak® OFF Light
(V-Series Only)” under Competitive Driving Mode (LF4 and V-Series Only) 0 252. If the StabiliTrak and TCS are off, the system does not assist in controlling the vehicle. Turn on the TCS and the StabiliTrak systems and the warning light turns off. See Traction Control/Electronic Stability Control 0 249.
Traction Control System (TCS)/StabiliTrak® Light
If the light is on and not flashing, the TCS and potentially the StabiliTrak system have been disabled. A DIC message may display. Check the DIC messages to determine which feature(s) is no longer functioning and whether the vehicle requires service. If the light is on and flashing, the TCS and/or the StabiliTrak system is actively working. See Traction Control/Electronic Stability Control 0 249.
Engine Coolant Temperature Warning Light
This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the StabiliTrak system is turned off. If StabiliTrak is off, the Traction Control System (TCS) is also off. This light may also come on when a Performance Traction Management (PTM) mode is selected. See “Performance Traction Management
This light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off.
This light comes on briefly while starting the vehicle.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
If it does not, have the vehicle serviced by your dealer. If the system is working normally the indicator light goes off.
Caution
The engine coolant temperature warning light indicates that the vehicle has overheated. Driving with this light on can damage the engine and it may not be covered by the vehicle warranty. See Engine Overheating 0 312.
The engine coolant temperature warning light comes on when the engine has overheated. If this happens, pull over and turn off the engine as soon as possible. See Engine Overheating 0 312.
Instruments and Controls
127
Tire Pressure Light
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS.
When the Light Is On Steady This indicates that one or more of the tires are significantly underinflated. A Driver Information Center (DIC) tire pressure message may also display. See Tire Messages 0 146. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label. See Tire Pressure 0 339.
When the Light Flashes First and Then Is On Steady If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle. See Tire Pressure Monitor Operation 0 342.
Engine Oil Pressure Light
Caution
Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
128
Instruments and Controls
It also comes on when the fuel tank is low on fuel. The light turns off when fuel is added. If it does not, have the vehicle serviced.
Security Light
High-Beam On Light
The security light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system. See Immobilizer Operation 0 46.
This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer 0 162. IntelliBeam® Light
This light comes on when the IntelliBeam system, if equipped, is enabled. See Exterior Lamp Controls 0 160.
This light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. See your dealer.
Low Fuel Warning Light
This light is near the fuel gauge and comes on briefly when the ignition is turned on as a check to show it is working.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Adaptive Forward Lighting (AFL) Light
Instruments and Controls
129
Lamps On Reminder
Adaptive Cruise Control Light
This light comes on when the exterior lamps are in use. See Exterior Lamp Controls 0 160.
Cruise Control Light
This light in the Driver Information Center (DIC) comes on when the Adaptive Cruise Control (if equipped) is active. See Adaptive Cruise Control 0 258.
This light should come on briefly as the vehicle is started. If it does not come on, have the vehicle serviced by your dealer. This light comes on solid when there is a problem with the AFL system. It flashes when the system is switching between lighting modes. See Adaptive Forward Lighting (AFL) 0 164.
The cruise control light is white when the cruise control is on and ready, and turns green when the cruise control is set and active. See Cruise Control 0 256.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
130
Instruments and Controls
Information Displays
Driver Information Center (DIC) The DIC displays are shown in the left and right interactive display zones on the instrument cluster. The displays show the status of many vehicle systems. The controls for the DIC are on the right steering wheel control.
y or z : Press to move up or down in a list.
S or T : Press to move between the interactive display zones in the cluster. Press S to go back to the previous menu. SEL (Select) : Press to open a menu or select a menu item. Press and hold to reset values on certain screens. DIC Information Display Options The information displays on the DIC can be turned on or off through the Options menu. 1. Press SEL while viewing the
Options page in the center display zone on the cluster.
2. Scroll to Info Pages and
press SEL.
3. Press y or z to move
through the list of possible information displays.
4. Press SEL while an item is
highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it.
DIC Information Displays The following is the list of all possible DIC information displays. Some of the information displays may not be available for your particular vehicle. Speed : Shows the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph). Trip 1 and Trip 2 : Shows the current distance traveled, in either kilometers (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset by pressing and holding SEL while this display is active. Fuel Range : Shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Average Fuel Economy : Shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now, and will change as driving conditions change. The Average Fuel Economy can be reset by pressing and holding SEL while this display is active. Instantaneous Fuel Economy : Shows the current fuel economy in either liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change. Average Speed : Shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the
Instruments and Controls
131
last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active. Timer : This display can be used as a timer. To start the timer, press SEL while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press SEL briefly while this display is active and the timer is running. To reset the timer to zero, press and hold SEL while this display is active. Compass : Shows the direction the vehicle is driving. Turn Arrow : Shows the next maneuver when using route guidance. Travel Time : Shows the estimated time duration remaining for the current route. Estimated Time to Arrival : Shows the approximate time of arrival to your destination when using route guidance.
Speed Limit : Shows the current speed limit on vehicles with the navigation system. The information for this page comes from a roadway database. Speed Warning : Allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when Speed Warning is displayed. Press y or z to adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed and a chime may sound. Cruise Set Speed : Shows the speed the cruise control or Adaptive Cruise Control (ACC, if equipped) is set to. Gap Setting : When ACC (if equipped) has been engaged, this page shows the current gap setting along with the vehicle ahead telltale. Performance Timer (If Equipped) : On some vehicles, the last performance time will be displayed. Press SEL to enter the Performance Timer Menu. In this
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
132
Instruments and Controls
menu, timer start and end speeds can be changed and the timer can be reset. Press and hold SEL while viewing the Performance Timer to clear the value and also stop the timer. Battery Voltage : Shows the current battery voltage. Oil Life : Shows an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. See Engine Oil Messages 0 138. The oil should be changed as soon as possible. See Engine Oil 0 301. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule. See Maintenance Schedule 0 379. The Oil Life display must be reset after each oil change. It will not reset itself. Do not to reset the Oil Life display accidentally at any time
other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several seconds while the Oil Life display is active. See Engine Oil Life System 0 303. Tire Pressure : Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System 0 341 and Tire Pressure Monitor Operation 0 342. Vehicle Odometer : Shows the odometer. Blank Page : The Blank Page display allows for no information to be displayed in the DIC display zone(s).
Head-Up Display (HUD)
{ Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.
If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The information is projected through the HUD lens on the driver side of the instrument panel and focused out toward the front of the vehicle.
Caution
If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
133
The HUD information can be displayed in various languages. The speedometer reading and other numerical values can be displayed in either English or metric units. The language selection is changed through the radio and the units of measurement is changed through the instrument cluster. See Vehicle Personalization 0 148 and “Settings” under Instrument Cluster 0 114.
. Speed . Tachometer . Audio . Phone . Navigation . Collision Alert . Cruise Control . Lane Departure . Low Fuel . Transmission Gear Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls. See Vehicle Messages 0 136.
HUD Display on the Vehicle
Windshield
The HUD may display some of the following vehicle information and vehicle messages or alerts:
The HUD control is to the left of the steering wheel. To adjust the HUD image: 1. Adjust the driver seat to a
comfortable position.
2. Start the engine. 3. Use the following settings to
adjust the HUD.
$ (Image Adjustment) : Press down or lift up to center the HUD image. The HUD image can only be adjusted up and down, not side to side. ! (Display View) : Press to select the display view. Each press will change the display view. D (Image Brightness) : Lift up and hold to brighten the display. Press down and hold to dim the display. Hold down to turn the display off. The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
134
Instruments and Controls
The HUD image can temporarily light up depending on the angle and position of sunlight on the HUD display. This is normal. Polarized sunglasses could make the HUD image harder to see.
HUD Views There are four views in the HUD. Some vehicle information and vehicle messages or alerts may be displayed in any view.
English
English
Speed View : This display gives the speedometer reading (in English or metric units), Adaptive Cruise Control speed, Forward Collision Alert, Lane Departure Warning, and Vehicle Ahead indicator. Some information only appears on vehicles that have these features, and when they are active.
Audio/Phone View : This display includes the information in speed view along with audio/phone information. The current radio station, media type, and incoming calls will be displayed. All HUD views may briefly display audio information when the driver uses the steering wheel controls to adjust the audio settings appearing in the instrument cluster. Incoming phone calls appearing in the instrument cluster may also display in any HUD view.
Metric
Metric
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
135
HUD Troubleshooting Check that: . Nothing is covering the
HUD lens.
. HUD brightness setting is not
too dim or too bright.
. HUD is adjusted to the proper
height.
. Polarized sunglasses are
not worn.
. Windshield and HUD lens are
clean.
If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. See Windshield Replacement 0 320.
Metric
Metric
English
English
Navigation View : This display includes the information in speed view along with Turn-by-Turn Navigation information. When navigation routing is not active, “No Route Active” is displayed. Navigation Turn-by-Turn Alerts shown in the instrument cluster may also be displayed in any HUD view.
Performance View : This display gives the speedometer reading (in English or metric units), rpm reading, transmission positions, and gear shift indicator. Care of the HUD Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image. Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
136
Instruments and Controls
Vehicle Messages Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other. The messages that do not require immediate action can be acknowledged and cleared by pressing SEL. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem. The following are some of the vehicle messages that may be displayed depending on the vehicle content.
Battery Voltage and Charging Messages
BATTERY SAVER ACTIVE This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing features of the vehicle that may be noticed. At the point that features are disabled, this message displays. Turn off unnecessary accessories to allow the battery to recharge. LOW BATTERY This message is displayed when the battery voltage is low. See Battery - North America 0 316. SERVICE BATTERY CHARGING SYSTEM This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.
TRANSPORT MODE ON This message is displayed when the vehicle is in transport mode. Some features can be disabled while in this mode, including Remote Keyless Entry (RKE), remote start, and the vehicle alarm system. Take the vehicle to your dealer for service to turn transport mode off.
Brake System Messages
BRAKE FLUID LOW This message is displayed when the brake fluid level is low. See Brake Fluid 0 315. STEP ON BRAKE TO RELEASE PARK BRAKE This message is displayed if you attempt to release the Electric Parking Brake without the brake pedal applied. See Parking Brake (Electric) 0 246 or Parking Brake (Manual) 0 248.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
RELEASE PARKING BRAKE This message is displayed if the Electric Parking Brake is on while the vehicle is in motion. See Parking Brake (Electric) 0 246 or Parking Brake (Manual) 0 248. SERVICE BRAKE ASSIST This message may be displayed when there is a problem with the brake boost assist system. When this message is displayed, the brake boost assist motor might be heard operating and you might notice pulsation in the brake pedal. This is normal under these conditions. Take the vehicle to your dealer for service. SERVICE PARKING BRAKE This message is displayed when there is a problem with the parking brake. Take the vehicle to your dealer for service.
Instruments and Controls
137
Compass Messages Dashes may be displayed if the vehicle temporarily loses communication with the Global Positioning System (GPS).
Cruise Control Messages
ADAPTIVE CRUISE SET TO XXX This message displays when the Adaptive Cruise Control (ACC) speed is set. See Adaptive Cruise Control 0 258. ADAPTIVE CRUISE TEMPORARILY UNAVAILABLE This message displays when attempting to activate Adaptive Cruise Control (ACC) when it is temporarily unavailable. The ACC system does not need service. This can occur under the following conditions: . The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the
vehicle. For cleaning instructions, see Exterior Care 0 368.
. Heavy rain or snow is interfering with the radar object detection or camera performance. CRUISE SET TO XXX This message displays when the cruise control speed is set. See Cruise Control 0 256. NO CRUISE BRAKING GAS PEDAL APPLIED This message displays when Adaptive Cruise Control (ACC) is active and the driver is pressing the gas pedal. When this occurs, ACC will not brake. See Adaptive Cruise Control 0 258. SERVICE ADAPTIVE CRUISE CONTROL This message displays when the Adaptive Cruise Control (ACC) needs service. Take the vehicle to your dealer.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
138
Instruments and Controls
SHIFT TO PARK BEFORE EXITING This message may display if Adaptive Cruise Control (ACC) is engaged holding the vehicle at a stop, and the driver attempts to exit the vehicle. Put the vehicle in P (Park) before exiting.
Door Ajar Messages
DOOR OPEN A door open symbol will be displayed on the DIC showing which door is open. If the vehicle has been shifted out of P (Park), a DOOR OPEN message will also be displayed. The DOOR OPEN message may also be displayed if the vehicle starts to move. Close the door completely. HOOD OPEN This message will display along with a hood open symbol when the hood is open. A chime may also sound. Close the hood completely.
TRUNK OPEN This message will display along with a symbol when the trunk is open. Close the trunk completely.
Engine Cooling System Messages
A/C OFF ENGINE COOLANT HOT This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air conditioning compressor turns back on. The vehicle can continue to be driven. If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine.
ENGINE OVERHEATED — IDLE ENGINE This message displays and a chime sounds when the engine coolant temperature is too hot. The engine coolant temperature warning light will also be on. Stop and allow the vehicle to idle until it cools down. ENGINE OVERHEATED — TURN VEHICLE OFF This message displays and a continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. The engine coolant temperature warning light will flash. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature.
Engine Oil Messages
CHANGE ENGINE OIL SOON This message displays when the engine oil needs to be changed. When you change the engine oil, be
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
139
sure to reset the oil life system. See Engine Oil Life System 0 303, Driver Information Center (DIC) 0 130, Engine Oil 0 301, and Maintenance Schedule 0 379. ENGINE OIL HOT, IDLE ENGINE This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down. ENGINE OIL LOW — ADD OIL On some vehicles, this message displays when the engine oil level may be too low. Check the oil level before filling to the recommended level. If the oil is not low and this message remains on, take the vehicle to your dealer for service. See Engine Oil 0 301. OIL PRESSURE LOW — STOP ENGINE This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been
corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer.
Engine Power Messages
ENGINE POWER IS REDUCED This message displays when the vehicle's engine power is reduced. Reduced engine power can affect the vehicle's ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your dealer for service as soon as possible.
Fuel System Messages
FUEL LEVEL LOW This message displays when the vehicle is low on fuel. Refuel as soon as possible.
TIGHTEN GAS CAP This message displays when the fuel cap is not on tight. Tighten the fuel cap.
Key and Lock Messages
NO REMOTE KEY WAS DETECTED PLACE KEY IN TRANSMITTER POCKET THEN START YOUR VEHICLE This message displays when trying to start the vehicle if an RKE transmitter is not detected. The transmitter battery may be weak. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation 0 31. NO REMOTE DETECTED This message displays when the transmitter battery may be weak. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation 0 31.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
140
Instruments and Controls
NO REMOTE DETECTED PRESS BRAKE TO RESTART This message displays when attempting to turn off the vehicle and the RKE transmitter is no longer detected. Restarting is allowed without the RKE transmitter for five minutes. Press the brake pedal to restart the vehicle. NUMBER OF KEYS PROGRAMMED This message displays when programming new keys to the vehicle. REMOTE LEFT IN VEHICLE This message displays when leaving the vehicle with the RKE transmitter still inside. REPLACE BATTERY IN REMOTE KEY This message displays when the battery in the RKE transmitter needs to be replaced.
Lamp Messages
AFL (ADAPTIVE FORWARD LIGHTING) LAMPS NEED SERVICE This message displays when the AFL system is disabled and needs service. See your dealer. See Adaptive Forward Lighting (AFL) 0 164. AUTOMATIC LIGHT CONTROL
