Login- Download PDF Manual
-
ON/OFF This message is displayed when the exterior lamp control is in AUTO and the lights have turned on or off. See Automatic Headlamp System 0 163. XXX TURN INDICATOR FAILURE When one of the turn signals is out, this message displays to show which bulb needs to be replaced. See Bulb Replacement 0 320 and Replacement Bulbs 0 322.
TURN SIGNAL ON This message is displayed if the turn signal has been left on. Turn off the turn signal.
Object Detection System Messages
24 GHz RADARS OFF This message displays when driving in certain areas where there may be radar interference. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and the Front Automatic Braking (FAB) System may not work or may not work as well. The vehicle does not need service. AUTOMATIC COLLISION PREP OFF This message displays when the Front Automatic Braking (FAB) System has been turned off. See Front Automatic Braking (FAB) System 0 273.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
141
AUTOMATIC COLLISION PREP REDUCED This message displays when the Front Automatic Braking (FAB) System has been set to the Alert setting. This setting disables most FAB functions. Some last-second automatic braking capability is still provided with the Alert setting, but braking is less likely to occur. See Front Automatic Braking (FAB) System 0 273. AUTOMATIC COLLISION PREP UNAVAILABLE This message displays when the Front Automatic Braking (FAB) System has been unavailable for some time. The FAB System does not need service. This message can display under the following conditions: . The front of the vehicle or
windshield is not clean. Keep these areas clean and free of mud, dirt, snow, ice, and slush. For cleaning instructions, see Exterior Care 0 368.
. Heavy rain or snow is interfering
with the object detection performance.
This message may also be displayed if there is a problem with the StabiliTrak system. See Traction Control/Electronic Stability Control 0 249. FORWARD COLLISION ALERT OFF This message displays when the Forward Collision Alert has been turned off. FRONT CAMERA BLOCKED CLEAN WINDSHIELD This message displays when the camera is blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue. The Lane Keep Assist (LKA) and the Lane Departure Warning (LDW) system will not operate. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and the Front Automatic Braking (FAB) System may not work or may not work as well.
LANE CHANGE ALERT OFF This message indicates that the driver has turned the Side Blind Zone Alert (SBZA) and Lane Change Alert (LCA) systems off. LANE KEEPING ASSIST UNAVAILABLE This message displays when the Lane Keep Assist (LKA) and Lane Departure Warning (LDW) system is temporarily unavailable. The LKA system does not need service. This message could be due to the camera being blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue. REAR AUTO BRAKE/PARK ASSIST OFF This message displays when the Parking Assist system has been turned off or when there is a temporary condition causing the system to be disabled.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
142
Instruments and Controls
REAR AUTO BRAKE AND PARK ASSIST UNAVAILABLE This message displays when attempting to activate the parking and backing features of the Driver Assistance System when they are temporarily unavailable. The system does not need service. This can occur under the following conditions: . The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle. For cleaning instructions, see Exterior Care 0 368.
. Heavy rain or snow is interfering with the radar object detection or camera performance.
See Driver Assistance Systems 0 266. SERVICE AUTOMATIC COLLISION PREP If this message displays, take the vehicle to your dealer to repair the system. Adaptive Cruise Control
(ACC), Forward Collision Alert (FCA), and/or the Front Automatic Braking (FAB) System may not work. Do not use these systems until the vehicle has been repaired. SERVICE DRIVER ASSIST SYSTEM If this message displays, take the vehicle to your dealer to repair the system. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), the Front Automatic Braking (FAB) System, Assistance Systems for Parking or Backing, and/or the Lane Keep Assist (LKA) system may not work. Do not use these systems until the vehicle has been repaired. SERVICE FRONT CAMERA If this message remains on after continued driving, take the vehicle to your dealer for service. Do not use the Lane Keep Assist (LKA), Lane Departure Warning (LDW), and Forward Collision Alert (FCA) features.
SERVICE PARK ASSIST This message displays if there is a problem with the Parking Assist system. Do not use this system to help you park. See your dealer for service. SERVICE REAR AUTO BRAKE AND PARK ASSIST This message displays if there is a problem with the parking and backing features of the Driver Assistance System. Do not use this system to help park or back the vehicle. See your dealer for service. SERVICE SIDE DETECTION SYSTEM If this message remains on after continued driving, the vehicle needs service. Side Blind Zone Alert (SBZA), Lane Change Alert (LCA), and Rear Cross Traffic Alert (RCTA) features will not work. Take the vehicle to your dealer.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
SIDE DETECTION SYSTEM UNAVAILABLE This message indicates that Side Blind Zone Alert (SBZA), Lane Change Alert (LCA), and Rear Cross Traffic Alert (RCTA) are disabled either because the sensor is blocked and cannot detect vehicles in the blind zone, or the vehicle is passing through an open area, such as the desert, where there is insufficient data for operation. This message may also activate during heavy rain or due to road spray. The vehicle does not need service. For cleaning, see "Washing the Vehicle" under Exterior Care 0 368. TAKE STEERING If LKA does not detect active driver steering, an alert and chime may be provided. Move the steering wheel to dismiss. See Lane Keep Assist (LKA) 0 277.
Instruments and Controls
143
Ride Control System Messages
ALL WHEEL DRIVE OFF If the vehicle has the All-Wheel-Drive (AWD) system, this message displays when there is a temporary condition making the AWD system unavailable. The vehicle will run in 2WD. This could be caused by: . Loss of wheel or vehicle speed . AWD system overheat . Certain vehicle electrical
conditions
This message turns off when the above conditions are no longer present and the warning message is reset. See All-Wheel Drive 0 245. PERFORMANCE TRACTION 1 - WET (V-Series Only) This message displays when this Performance Traction Management (PTM) mode is selected. The TCS and StabiliTrak OFF cluster lights will also be on when this mode is
selected. Launch Control is available when this mode is selected. In this mode, the Traction Control and Active Handling System are available but intended for use on wet race track conditions. Adjust your driving accordingly. See “Performance Traction Management (V-Series Only)” under Competitive Driving Mode (LF4 and V-Series Only) 0 252. PERFORMANCE TRACTION 2 - DRY (V-Series Only) This message displays when this Performance Traction Management (PTM) mode is selected. The TCS and StabiliTrak OFF cluster lights will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode, the Traction Control and Active Handling System are available but intended for use on dry race track conditions. Adjust your driving accordingly. See “Performance Traction Management (V-Series Only)” under Competitive Driving Mode (LF4 and V-Series Only) 0 252.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
144
Instruments and Controls
PERFORMANCE TRACTION 3 - SPORT 1 (V-Series Only) This message displays when this Performance Traction Management (PTM) mode is selected. The TCS and StabiliTrak OFF cluster lights will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode, the Traction Control and Active Handling System are available but intended for use on dry race track conditions. Adjust your driving accordingly. See “Performance Traction Management (V-Series Only)” under Competitive Driving Mode (LF4 and V-Series Only) 0 252. PERFORMANCE TRACTION 4 - SPORT 2 (V-Series Only) This message displays when this Performance Traction Management (PTM) mode is selected. The TCS and StabiliTrak OFF cluster lights will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode, the Traction
Control is available but intended for use on dry race track conditions. The Active Handling System is disabled when this mode is selected. This mode will require more driver skill than modes 1–3. Adjust your driving accordingly. See “Performance Traction Management (V-Series Only)” under Competitive Driving Mode (LF4 and V-Series Only) 0 252. PERFORMANCE TRACTION 5 - RACE (V-Series Only) This message displays when this Performance Traction Management (PTM) mode is selected. The TCS and StabiliTrak OFF cluster lights will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode, the Traction Control is available but intended for use on dry race track conditions. The Active Handling System is disabled when this mode is selected. This mode will require more driver skill than modes 1–4. Adjust your driving accordingly. See “Performance Traction Management
(V-Series Only)” under Competitive Driving Mode (LF4 and V-Series Only) 0 252. REAR AXLE OFF When this message is displayed, the vehicle’s handling capabilities will be reduced during severe maneuvers. StabiliTrak will be affected. See Traction Control/ Electronic Stability Control 0 249. SERVICE ALL WHEEL DRIVE This message displays if a problem occurs with the All-Wheel-Drive (AWD) system. The vehicle will run in 2WD. This could be caused by: . An electronics problem . Worn out or overheated clutch
plates
. Various electrical issues The system may need service. See your dealer.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
145
SERVICE REAR AXLE If there is a problem detected with the Electronic Limited-Slip Rear Axle, this message displays. When displayed, the system is not operational and driving should be adjusted accordingly. Take the vehicle to your dealer for service as soon as possible. When this message is displayed, the vehicle’s handling capabilities will be reduced during severe maneuvers. StabiliTrak will be affected. See Traction Control/ Electronic Stability Control 0 249. SERVICE STABILITRAK This message displays if there is a problem with the StabiliTrak system. See Traction Control/Electronic Stability Control 0 249. SERVICE SUSPENSION SYSTEM This message displays when there is a problem with the Magnetic Ride Control system. See Driver Mode Control 0 251. Have the vehicle serviced by your dealer.
SERVICE TRACTION CONTROL This message displays when there is a problem with the Traction Control System (TCS). See Traction Control/Electronic Stability Control 0 249. TRACTION CONTROL OFF This message may display when the Traction Control System (TCS) has been turned off. See Traction Control/Electronic Stability Control 0 249. TRACTION CONTROL ON This message may display when the Traction Control System (TCS) has been turned on. See Traction Control/Electronic Stability Control 0 249.
Airbag System Messages
SERVICE AIRBAG This message displays if there is a problem with the airbag system. See your dealer for service.
Safety Belt Messages
AUTOMATIC SEATBELT TIGHTENING UNAVAILABLE This message displays when the Automatic Safety Belt Tightening System, if equipped, becomes unavailable. This could be caused by a temporary condition. If the message continues to display, see your dealer. SERVICE AUTOMATIC SEATBELT TIGHTENING SYSTEM If this message displays, take the vehicle to your dealer to repair the Automatic Safety Belt Tightening System, if equipped.
Security Messages
THEFT ATTEMPTED This message displays if the vehicle detects a tamper condition.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
146
Instruments and Controls
Service Vehicle Messages
SERVICE AC SYSTEM This message displays if there is a problem with the air conditioning system. Take the vehicle to your dealer for service. SERVICE POWER STEERING This message displays and a chime may sound when there may be a problem with the power steering system. If this message displays and a reduction in steering performance or loss of power steering assistance is noticed, see your dealer. SERVICE STEERING COLUMN LOCK This message displays if there is a problem with the steering column lock. Take the vehicle to your dealer for service. SERVICE VEHICLE SOON This message displays if there is a problem with the vehicle. Take the vehicle to your dealer for service.
Starting the Vehicle Messages
PRESS BRAKE TO START This message is displayed when attempting to start the vehicle without first pressing the brake pedal. SERVICE KEYLESS START SYSTEM This message is displayed if there is a problem with the pushbutton start system. Take the vehicle to your dealer for service. TURN STEERING WHEEL START VEHICLE AGAIN This message may display when you try to start the vehicle, but the column remains locked. Try turning the steering wheel while starting the vehicle to unlock the steering column. If the vehicle still does not start, turn the steering wheel the other way, and try starting the vehicle again.
Tire Messages
SERVICE TIRE MONITOR SYSTEM This message displays if there is a problem with the Tire Pressure Monitor System (TPMS). See Tire Pressure Monitor Operation 0 342. TIRE LEARNING ACTIVE This message displays when the system is learning new tires. See Tire Pressure Monitor Operation 0 342. TIRE PRESSURE LOW ADD AIR TO TIRE This message displays when the pressure in one or more of the tires is low. This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate the location of the low tire. The low tire pressure warning light will also come on. See Tire Pressure Light 0 127.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
147
If a tire pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires 0 332, Vehicle Load Limits 0 226, and Tire Pressure 0 339. You can receive more than one tire pressure message at a time. The DIC also shows the tire pressure values. See Driver Information Center (DIC) 0 130.
Transmission Messages MANUAL TRANSMISSION — RELEASE CLUTCH PEDAL This message displays and a chime sounds if the manual transmission clutch pedal is partially applied for an extended period of time while the vehicle is being driven. Driving with the clutch pedal applied can reduce the life of the clutch. Fully release the clutch pedal after each gear change.
REDUCED PERFORMANCE — REDUCE CLUTCH USE This message displays and engine torque is momentarily limited if excessive manual transmission clutch slip is detected while the clutch pedal is fully released. Reduce clutch slip during acceleration from a stop and during gear changes to allow the clutch to cool. This should prevent further slips with the clutch pedal fully released. If this message displays repeatedly, see your dealer. SERVICE TRANSMISSION This message displays if there is a problem with the transmission. See your dealer. SHIFT DENIED This message displays when using the Driver Shift Control (DSC) and attempting to shift to a gear not appropriate for the vehicle speed and engine revolutions per minute (rpm). See Manual Mode 0 241.
SHIFT TO PARK This message displays when the transmission needs to be shifted to P (Park). This may appear when turning the ignition off if the vehicle is not in P (Park). TRANSMISSION HOT — IDLE ENGINE This message displays and a chime sounds if the automatic transmission fluid in the vehicle gets hot. Driving with the automatic transmission fluid temperature high can cause damage to the vehicle. Stop the vehicle and let it idle to allow the transmission to cool. This message clears when the fluid temperature reaches a safe level. TRANSMISSION HOT — SLOW DOWN This message displays and a chime sounds if the manual transmission fluid is hot and if the vehicle speed is high. Driving with the manual transmission fluid temperature high can cause damage to the vehicle. Drive at a slower speed to cool the manual transmission fluid. This
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
148
Instruments and Controls
Washer Fluid Messages
WASHER FLUID LOW ADD FLUID This message may display when the washer fluid level is low. Fill the windshield washer reservoir as soon as possible. See Engine Compartment Overview 0 294 for the location of the windshield washer reservoir. Also, see Washer Fluid 0 313.
message clears when the vehicle has slowed sufficiently or if the manual transmission fluid has cooled sufficiently.
Vehicle Reminder Messages
ICE POSSIBLE DRIVE WITH CARE This message displays when ice conditions are possible.
Vehicle Speed Messages
SELECTED SPEED LIMIT EXCEEDED This message is displayed when the vehicle speed is greater than the set speed. See "Speed Warning" under Driver Information Center (DIC) 0 130. VEHICLE SPEED LIMITED This message is displayed under certain conditions when there is a problem and the vehicle’s speed is being limited.
Vehicle Personalization Use the audio system controls to access the personalization menus for customizing vehicle features. The following are all possible personalization features. Depending on the vehicle, some may not be available.
Base Radio Audio System Controls MENU : Press the center of the knob to enter the menus and select menu items. Turn the knob to scroll through the menus. S BACK : Press to exit or move backward in a menu. To access the personalization menu: 1. On the Home page, turn the
MENU knob to highlight Settings and press the MENU knob.
2. Turn the MENU knob to
highlight the desired feature and press the MENU knob.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
149
CUE Infotainment System Audio System Controls To access the personalization menu: 1. Touch SETTINGS on the Home
page on the infotainment system display.
2. Touch the desired feature to
display a list of available options.
3. Touch to select the desired
feature setting.
4. Touch the [ Back screen
button to return to the previous menu.
Personalization Menus The following list of menu items may be available: . Time and Date . Driving Mode . Language (Language) . Valet Mode . Radio . Vehicle
. Bluetooth . Apple CarPlay . Android Auto . Voice . Display . Rear Camera . Return to Factory Settings . Software Information Each menu is detailed in the following information. Time and Date Manually set the time and date. See Clock (Base Radio) 0 109 or Clock (Uplevel Radio) 0 109. Driving Mode Select and the following may display: . Engine Sound Management
Engine Sound Management Select Engine Sound Management, then choose from the available options. See Driver Mode Control 0 251.
Language (Language) Select Language, then select from the available language(s). The selected language will display on the system, and voice recognition will reflect the selected language. Valet Mode (If Equipped) This will lock the infotainment system and steering wheel controls. It may also limit access to vehicle storage locations (if equipped). To enable valet mode: 1. Enter a four-digit code on the
keypad.
2. Select Enter to go to the
confirmation screen.
3. Re-enter the four-digit code. Press Lock or Unlock to lock or unlock the system. Press Back to go back to the previous menu. Radio Press to display the Radio Menu and the following may display: . Manage Favorites
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
150
Instruments and Controls
. Number of Favorites Shown . Audible Touch Feedback . Auto Volume . Bose AudioPilot . Maximum Startup Volume . Audio Cue Volume
Manage Favorites This allows favorites to be edited. Select a displayed Favorite to edit. Select Rename to rename the favorite or Delete to delete it.
Number of Favorites Shown Select to set the number of favorites to display. Select the desired number or select Auto and the infotainment system will automatically adjust the number of favorites shown.
Audible Touch Feedback This allows Audible Touch Feedback to be turned on or off. Select Off or On.
Auto Volume If equipped, this feature adjusts the volume based on the vehicle speed.
Bose® AudioPilot® This feature adjusts the volume based on the noise in the vehicle. See “Bose AudioPilot Noise Compensation Technology” in Home Page 0 171, AM-FM Radio 0 174, or under “Infotainment System Settings” in the infotainment manual.
Maximum Startup Volume This feature sets the maximum startup volume. If the vehicle is started and the volume is greater than this level, the volume is adjusted to this level. To set the maximum startup volume, select + or − to increase or decrease.
Audio Cue Volume If equipped, this feature adjusts the startup and shutdown sounds. To adjust the volume, select + or − to increase or decrease.
Vehicle Select and the following may display: . Climate and Air Quality . Collision/Detection Systems . Comfort and Convenience . Lighting . Power Door Locks . Remote Lock, Unlock, Start
Climate and Air Quality Select and the following may display: . Auto Fan Speed . Auto Heated Seats . Auto Defog . Auto Rear Defog
Auto Fan Speed This feature will set the auto fan speed. Select Low, Medium, or High.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
151
Auto Heated Seats When enabled, this feature will automatically activate heated seats at the level required by the interior temperature. The auto heated seats can be turned off by using the heated seat buttons on the center stack. Select Off or On.
Auto Defog When set to On, the front defog will automatically react to temperature and humidity conditions that may cause fogging. Select Off or On.
Auto Rear Defog If equipped, this feature will automatically turn on the rear window defog. Select Off or On.
Collision/Detection Systems Select the Collision/Detection Systems menu and the following may display: . Alert Type
. Auto Collision Preparation . Rear Cross Traffic Alert . Go Notifier . Lane Change Alert
Alert Type This feature will set crash alerts to beeps or seat vibrations. This setting affects all crash alerts including: . Forward Collision . Lane Departure Warning . Adaptive Cruise Control . Parking Assist . Backing Warning Select Beeps or Safety Alert Seat.
Auto Collision Preparation This feature will turn on or off the Forward Collision Alert (FCA) and Front Automatic Braking (FAB). The Off setting disables all FCA and FAB functions. With the Alert and Brake setting, both FCA and FAB are available. The Alert setting disables FAB, but some last-second automatic braking capability is still
provided, though less likely to occur. See Front Automatic Braking (FAB) System 0 273. Select Off, Alert, or Alert and Brake.
Rear Cross Traffic Alert This allows the feature to be turned on or off. See Assistance Systems for Parking or Backing 0 266. Select Off or On.
Go Notifier This feature will give a reminder that Adaptive Cruise Control provides when it has brought the vehicle to a complete stop behind another stopping vehicle, and then that vehicle drives on. See Adaptive Cruise Control 0 258. Select Off or On.
Lane Change Alert This allows the feature to be turned on or off. See Lane Change Alert (LCA) 0 275. Select Off or On.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
152
Instruments and Controls
Comfort and Convenience Select and the following may display: . Auto Memory Recall . Easy Exit Options . Chime Volume . Reverse Tilt Mirror . Rainsense Wipers
Auto Memory Recall This feature automatically recalls the current driver’s previously stored 1 or 2 button positions when entering the vehicle. See Memory Seats 0 60. Select Off or On.
Easy Exit Options This feature automatically recalls the current driver’s previously stored Exit button position when exiting the vehicle. See Memory Seats 0 60. Select Off or On.
Chime Volume This allows the selection of the chime volume level. Select + or − to adjust the volume.
Reverse Tilt Mirror When on, driver, passenger, or both driver and passenger mirrors will tilt downward when the vehicle is shifted to R (Reverse). See Reverse Tilt Mirrors 0 48. Select Off, On - Driver and Passenger, On - Driver, or On - Passenger.
Rainsense Wipers This allows the feature to be turned on or off. See “Rainsense™” in Windshield Wiper/Washer 0 107. Select Off or On.
Lighting Select and the following may display: . Vehicle Locator Lights . Exit Lighting . Adaptive Forward Lighting
Vehicle Locator Lights This feature will flash the exterior lamps when K on the Remote Keyless Entry (RKE) transmitter is pressed to locate the vehicle. Select Off or On.
Exit Lighting This allows the selection of how long the exterior lamps stay on when leaving the vehicle when it is dark outside. Select Off, 30 Seconds, 60
Seconds, or 120 Seconds.Adaptive Forward Lighting This feature allows the headlamps to pivot horizontally to provide greater road illumination while turning. See Adaptive Forward Lighting (AFL) 0 164. Select Off or Corner and Curve Lighting.
Power Door Locks Select and the following may display: . Unlocked Door Anti-Lockout
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
153
. Auto Door Unlock . Delayed Door Lock
Unlocked Door Anti-Lockout When on, this feature will keep the driver door from locking when the door is open. If Off is selected, the Delayed Door Lock menu will be available. Select Off or On.
Auto Door Unlock This allows selection of which of the doors will automatically unlock when the vehicle is shifted into P (Park) with an automatic transmission or when the vehicle is turned off with a manual transmission. Select Off, All Doors, or Driver Door.
Delayed Door Lock When on, this feature will delay the locking of the doors. To override the delay, press the power door lock switch on the door. Select Off or On.
Remote Lock, Unlock, Start Select and the following may display: . Remote Unlock Light Feedback . Remote Lock Feedback . Remote Door Unlock . Remote Start Auto Heat Seats . Remote Window Operation . Passive Door Unlock . Passive Door Lock . Remote Left in Vehicle Alert
Remote Unlock Light Feedback When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter. Select Off or Flash Lights.
Remote Lock Feedback This allows selection of what type of feedback is given when locking the vehicle with the RKE transmitter. Select Off, Lights and Horn, Lights Only, or Horn Only.
Remote Door Unlock This allows selection of which doors will unlock when pressing K on the RKE transmitter. Select All Doors or Driver Door.
Remote Start Auto Heat Seats If equipped and turned on, this feature will turn the heated seats on when using remote start on cold days. Select Off or On.
Remote Window Operation This allows the window to be opened when pressing K on the RKE transmitter. See Remote Keyless Entry (RKE) System Operation 0 31. Select Off or On.
Passive Door Unlock This allows the selection of which doors will unlock when using the button on the driver door to unlock the vehicle. Select All Doors or Driver Door.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
154
Instruments and Controls
Passive Door Lock This allows passive locking to be turned on or off and selects feedback. See Remote Keyless Entry (RKE) System Operation 0 31. Select Off, On with Horn Chirp, or On.
Remote Left in Vehicle Alert This feature sounds an alert when the RKE transmitter is left in the vehicle. Select Off or On. Bluetooth Select and the following may display: . Pair New Device . Device Management . Ringtones . Voice Mail Numbers . Text Message Alerts
Pair New Device Select to pair a new device. See “Pairing” in “Infotainment Controls” under Bluetooth (Infotainment Controls) 0 192 or Bluetooth (Voice Recognition) 0 196 or Bluetooth (Overview) 0 191 or “Pairing” in “Infotainment Controls” under “Bluetooth” in the infotainment manual.
Device Management Select to connect to a different phone source, disconnect a phone, or delete a phone.
Ringtones Select to change the ring tone for the specific phone. The phone does not need to be connected to change the ring.
Voice Mail Numbers This feature displays the voice mail number for all connected phones. To change the voice mail number, select EDIT or press the EDIT button. Type in a new number, then select Save or press the Save button.
Text Message Alerts This feature allows text messages to be received. See “Text Messaging” under “Phone” in the infotainment manual. Select Off or On. Apple CarPlay™ Select and the following may display: . Apple CarPlay . Manage Apple CarPlay Devices
Apple CarPlay This feature allows Apple devices to be connected to the infotainment system through a USB port. Select Off or On.
Manage Apple CarPlay Devices Select to manage Apple devices. Apple CarPlay must be on for this feature to be accessed. Android Auto Select and the following may display: . Android Auto
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
155
. Manage Android Auto Devices
Android Auto Select to turn this feature off or on. Select Off or On.
Manage Android Auto Devices Select to manage Android devices. Android Auto must be on for this feature to be accessed. Voice Select and the following may display: . Confidence Threshold . Prompt Length . Audio Feedback Speed . Display “What Can I Say?” Tips
Confidence Threshold This feature allows the adjustment of the sensitivity of the speech recognition system. Select Confirm More or Confirm Less.
Prompt Length This feature adjusts the voice prompt length. Select Short or Long.
Audio Feedback Speed This feature adjusts the audio feedback speed. Select Slow, Medium, or Fast. Display “What Can I Say?” Tips This feature gives voice command tips. Select Off or On. Display Select and the following may display: . Mode . Proximity Sensing . Calibrate Touchscreen . Turn Display Off
Mode Select to change the display screen for day or night driving. Select Auto, Day, or Night.
Proximity Sensing This allows the feature to be turned on or off. Select Off, On, or On-Map Only.
Calibrate Touchscreen Select to calibrate the touchscreen, then follow the prompts.
Turn Display Off Select to turn the display off. Press anywhere on the display area or any faceplate button to turn the display on. Rear Camera Select and the following may display: . Guidance Lines . Rear Park Assist Symbols
Guidance Lines Select to turn Off or On. See Assistance Systems for Parking or Backing 0 266.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
156
Instruments and Controls
Rear Park Assist Symbols Select to turn Off or On. See Assistance Systems for Parking or Backing 0 266. Return to Factory Settings Select and the following may display: . Restore Vehicle Settings . Clear All Private Data . Restore Radio Settings
Restore Vehicle Settings This allows selection of restoring vehicle settings. Select Restore or Cancel.
Clear All Private Data This allows selection to clear all private information from the vehicle. Select Delete or Cancel.
Restore Radio Settings This allows selection to restore radio settings. Select Restore or Cancel. Software Information Select to view the infotainment system current software information.
Universal Remote System See Radio Frequency Statement 0 408.
Universal Remote System Programming
If equipped, these buttons are in the overhead console. This system can replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. These
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
157
instructions refer to a garage door opener, but can be used for other devices. Do not use the Universal Remote system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read these instructions completely before programming the Universal Remote system. It may help to have another person assist with the programming process. Keep the original hand-held transmitter for use in other vehicles as well as for future programming. Erase the programming when vehicle ownership is terminated. See “Erasing Universal Remote System Buttons” later in this section. To program a garage door opener, park outside directly in line with and facing the garage door opener receiver. Clear all people and objects near the garage door.
Make sure the hand-held transmitter has a new battery for quick and accurate transmission of the radio-frequency signal. Programming the Universal Remote System For questions or help programming the Universal Remote system, call 1-800-355-3515 or see www.homelink.com. Programming involves time-sensitive actions, and may time out causing the procedure to be repeated. To program up to three devices: 1. Hold the end of the hand-held transmitter about 3 to 8 cm (1
to 3 in) away from the Universal Remote system buttons with the indicator light in view. The hand-held transmitter was supplied by the manufacturer of the garage door opener receiver.2. At the same time, press and
hold both the hand-held transmitter button and one of the three Universal Remote
system buttons to be used to operate the garage door. Do not release either button until the indicator light changes from a slow to a rapid flash. Then release both buttons. Some garage door openers may require substitution of Step 2 with the procedure under “Radio Signals for Canada and Some Gate Operators” later in this section.
3. Press and hold the newly
programmed Universal Remote system button for five seconds while watching the indicator light and garage door activation.
If the indicator light stays on continuously or the garage door moves when the button is pressed, then programming is complete. There is no need to complete Steps 4–6. If the indicator light does not come on or the garage door does not move, a second button press may
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
158
Instruments and Controls
be required. For a second time, press and hold the newly programmed button for five seconds. If the light stays on or the garage door moves, programming is complete. If the indicator light blinks rapidly for two seconds, then changes to a solid light and the garage door does not move, continue with programming Steps 4–6.
Learn or Smart Button
4. After completing Steps 1–3,
locate the Learn or Smart button inside the garage on the garage door opener receiver.
The name and color of the button may vary by manufacturer.
5. Press and release the Learn or
6.
Smart button. Step 6 must be completed within 30 seconds of pressing this button. Inside the vehicle, press and hold the newly programmed Universal Remote system button for two seconds and then release it. If the garage door does not move or the lamp on the garage door opener receiver does not flash, press and hold the same button a second time for two seconds, then release it. Again, if the door does not move or the garage door lamp does not flash, press and hold the same button a third time for two seconds, then release it.
The Universal Remote system should now activate the garage door. Repeat the process for programming the two remaining buttons.
Radio Signals for Canada and Some Gate Operators For questions or programming help call 1-800-355-3515 or see www.homelink.com. Canadian radio-frequency laws and some U.S. gate operators require transmitter signals to time out or quit after several seconds of transmission. This may not be long enough for the Universal Remote system to pick up the signal during programming. If the programming did not work, replace Step 2 under “Programming the Universal Remote System” with the following: Press and hold the Universal Remote system button while pressing and releasing the hand-held transmitter button every two seconds until the signal has been successfully accepted by the Universal Remote system. The Universal Remote system indicator light will flash slowly at first and then rapidly. Proceed with Step 3 under “Programming the Universal Remote System” to complete.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Instruments and Controls
159
Reprogramming a Single Universal Remote System Button To reprogram any of the system buttons: 1. Press and hold any one of the
buttons. Do not release the button.
2. The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 under “Programming the Universal Remote System.”
Universal Remote System Operation
Using the Universal Remote System Press and hold the appropriate Universal Remote system button for at least one-half second. The indicator light will come on while the signal is being transmitted. Erasing Universal Remote System Buttons Erase all programmed buttons when vehicle ownership is terminated. To erase: 1. Press and hold the two outside buttons until the indicator light begins to flash. This should take about 10 seconds.
2. Release both buttons.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Lighting
160
LightingExterior Lighting
Exterior Lamp Controls . . . . . . . 160
Exterior Lamps OffReminder . . . . . . . . . . . . . . . . . . . 162
Headlamp High/Low-Beam
Changer . . . . . . . . . . . . . . . . . . . . 162
Flash-to-Pass . . . . . . . . . . . . . . . . 162
Daytime RunningLamps (DRL) . . . . . . . . . . . . . . . 163
Automatic Headlamp
System . . . . . . . . . . . . . . . . . . . . . . 163
Adaptive Forward
Lighting (AFL) . . . . . . . . . . . . . . . 164
Hazard Warning Flashers . . . . . 164
Turn and Lane-ChangeSignals . . . . . . . . . . . . . . . . . . . . . . 164
Interior Lighting
Instrument Panel Illumination
Control . . . . . . . . . . . . . . . . . . . . . . 165
Courtesy Lamps . . . . . . . . . . . . . . 165
Dome Lamps . . . . . . . . . . . . . . . . . 165
Reading Lamps . . . . . . . . . . . . . . 166Lighting Features
Entry Lighting . . . . . . . . . . . . . . . . 167
Exit Lighting . . . . . . . . . . . . . . . . . . 167
Battery Power Protection . . . . . 167
Exterior Lighting BatterySaver . . . . . . . . . . . . . . . . . . . . . . . 167
Exterior Lighting
Exterior Lamp Controls
The exterior lamp control is on the turn signal lever. Turn the control to the following positions: O (Off) : Turns off the exterior lamps. The knob returns to the AUTO position after it is released. Turn to O again to reactivate the AUTO mode. In Canada, the headlamps will automatically reactivate when the vehicle is shifted out of P (Park) on automatic transmission vehicles,
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
and when the parking brake is released on manual transmission vehicles. AUTO (Automatic) : Automatically turns the exterior lamps on and off, depending on outside lighting. ; (Parking Lamps) : Turns on the parking lamps including all lamps, except the headlamps. 2 (Headlamps) : Turns on the headlamps together with the parking lamps and instrument panel lights. IntelliBeam® System If equipped, this system turns the vehicle's high-beam headlamps on and off according to surrounding traffic conditions. The system turns the high-beam headlamps on when it is dark enough and there is no other traffic present.
Lighting
161
The high-beam headlamps remain on, under the automatic control, until one of the following situations occurs: . The system detects an approaching vehicle's headlamps.
. The system detects a preceding
vehicle's taillamps.
. The outside light is bright
enough that high-beam headlamps are not required.
. The vehicle's speed drops below
20 km/h (12 mph).
. The turn signal lever is moved
forward to the high-beam position or the Flash-to-Pass feature is used. See Headlamp High/Low-Beam Changer 0 162
and Flash-to-Pass 0 162.. The IntelliBeam system can be disabled by the High/Low-Beam Changer or the Flash-to-Pass feature. If this happens, the High/Low-Beam Changer must be activated two times within five seconds to reactivate the IntelliBeam system. The
This light comes on in the instrument cluster when the IntelliBeam system is enabled.
Turning On and Enabling IntelliBeam To enable the automatic high-beam system, with the turn signal lever in the neutral position, turn the exterior lamp control to AUTO. The blue high-beam on light appears on the instrument cluster when the high beams are on.
Driving with IntelliBeam The system only activates the high beams when driving over 40 km/h (25 mph). There is a sensor near the top center of the windshield, which automatically controls the system. Keep this area of the windshield clear of debris to allow for best system performance.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
162
Lighting
instrument cluster light will come on to indicate the IntelliBeam is reactivated.
The high beams may not turn off automatically if the system cannot detect other vehicle's lamps because of any of the following: . The other vehicle's lamp(s) are missing, damaged, obstructed from view, or otherwise undetected.
. The other vehicle's lamp(s) are covered with dirt, snow, and/or road spray.
. The other vehicle's lamp(s)
cannot be detected due to dense exhaust, smoke, fog, snow, road spray, mist, or other airborne obstructions.
. Your vehicle's windshield is dirty,
cracked, or obstructed by something that blocks the view of the light sensor.
. Your vehicle's windshield is covered with ice, dirt, haze, or other obstructions.
. Your vehicle is loaded such that
the front end points upward, causing the light sensor to aim high and not detect headlamps and taillamps.
. You are driving on winding or
hilly roads.
You may need to manually disable or cancel the high-beam headlamps by turning the low-beam headlamps on, if any of the above conditions exist.
Exterior Lamps Off Reminder A warning chime will sound if the exterior lamp control is left on in either the headlamp or parking lamp position and the driver door is opened with the ignition off.
Headlamp High/ Low-Beam Changer 2 3 (Headlamp High/Low-Beam Changer) : Push the turn signal lever away from you and release, to
turn the high beams on. To return to low beams, push the lever again or pull it toward you and release.
This indicator light turns on in the instrument cluster when the high-beam headlamps are on.
Flash-to-Pass This feature allows the high-beam headlamps to be used to signal the driver in front of you that you want to pass. Pull and hold the turn signal lever toward you to use this feature. When this is done the following will occur:
If the headlamps are off or in low-beam mode, the high-beam headlamps will turn on. They will stay on as long as the lever is held there. Release the lever to turn them off.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
The taillamps, sidemarker lamps, instrument panel lights, and other lamps will not be on. The DRL turn off when the headlamps are turned to O or the ignition is off.
Automatic Headlamp System When the exterior lamp control is set to AUTO and it is dark enough outside, the headlamps come on automatically.
If the headlamps are in high-beam mode, they will go to low beam.
Daytime Running Lamps (DRL) DRL can make it easier for others to see the front of your vehicle during the day. Fully functional DRL are required on all vehicles first sold in Canada. The DRL system turns on the low-beam headlamps at a reduced brightness. For vehicles with High Intensity Discharge (HID) headlamps, there is a dedicated DRL. The DRL will come on when all of the following conditions are met: . The ignition is on. . The exterior lamp control is
in AUTO.
. The light sensor determines it is
daytime.
. The parking brake is released or
the vehicle is not in P (Park).
Lighting
163
There is a light sensor on top of the instrument panel. Do not cover the sensor, otherwise the headlamps will come on when they are not needed. The system may also turn on the headlamps when driving through a parking garage or tunnel. If the vehicle is started in a dark garage, the automatic headlamp system comes on immediately. If it is light outside when the vehicle leaves the garage, there is a slight delay before the automatic headlamp system changes to the DRL. During that delay, the instrument cluster may not be as bright as usual. Make sure the instrument panel brightness control is in the full bright position. See Instrument Panel Illumination Control 0 165. When it is bright enough outside, the headlamps will turn off or may change to Daytime Running Lamps (DRL).
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
164
Lighting
The automatic headlamp system turns off when the exterior lamp control is turned to O or the ignition is off. Lights On with Wipers If the windshield wipers are activated in daylight with the engine on, and the exterior lamp control is in AUTO, the headlamps, parking lamps, and other exterior lamps come on. The transition time for the lamps coming on varies based on wiper speed. When the wipers are not operating, these lamps turn off. Move the exterior lamp control to O or ; to disable this feature.
Adaptive Forward Lighting (AFL) On vehicles with the AFL system, the headlamps pivot horizontally to provide greater road illumination while turning. To enable AFL, set the exterior lamp control on the turn signal lever to the AUTO position. Moving the control out of the AUTO position will deactivate the system. AFL will operate when the vehicle
Turn and Lane-Change Signals
speed is greater than 3 km/h (2 mph). AFL will not operate when the transmission is in R (Reverse). AFL is not immediately operable after starting the vehicle; driving a short distance is required to calibrate the AFL. See Exterior Lamp Controls 0 160.
Hazard Warning Flashers
Move the lever all the way up or down to signal a turn. An arrow on the instrument cluster flashes in the direction of the turn or lane change. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is completed. If the lever is briefly pressed and released, the turn signal flashes three times. The turn and lane-change signal can be turned off manually by moving the lever back to its original position.
| (Hazard Warning Flashers) : Press to make the front and rear turn signal lamps flash on and off. Press again to turn the flashers off. The hazard warning flashers turn on automatically if the airbags deploy.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
If after signaling a turn or lane change, the arrow flashes rapidly or does not come on, a signal bulb might be burned out. Replace any burned out bulbs. If a bulb is not burned out, check the fuse. See Fuses and Circuit Breakers 0 323.
Interior Lighting
Instrument Panel Illumination Control
Lighting
165
Courtesy Lamps The courtesy lamps come on when any door is opened and the dome lamp is in the DOOR position.
Dome Lamps The dome lamp is in the overhead console.
The brightness of the instrument panel lighting and steering wheel controls can be adjusted. D (Instrument Panel Illumination) : Move the thumbwheel up or down to brighten or dim the lights. The brightness of the displays automatically adjusts based on outdoor lighting. The instrument panel illumination control will set the lowest level to which the displays will automatically be adjusted.
To change the dome lamp settings, press: OFF : Turns the lamp off, even when a door is open. DOOR : The lamp comes on when a door is opened.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
166
Lighting
ON : Turns the lamp on.
Sedan
Coupe
Reading Lamps There are front and rear reading lamps. These lamps come on when any door is opened.
The rear reading lamps are over the rear passenger doors. Press the lamp lens to turn the rear passenger reading lamps on or off.
The rear reading lamps are in the headliner. Press m or n to turn the lamps on or off.
The front reading lamps are in the overhead console. Press m or n to turn the lamps on or off.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Lighting Features
Entry Lighting Some exterior lamps and most of the interior lights turn on briefly at night, or in areas of limited lighting when K is pressed on the Remote Keyless Entry (RKE) transmitter. See Remote Keyless Entry (RKE) System Operation 0 31. When the driver door is opened, all control lights, Driver Information Center (DIC) lights, and door pocket lights turn on. After about 30 seconds the exterior lamps turn off, then the remaining interior lights dim to off. Entry lighting can be disabled manually by changing the ignition out of the OFF position, or by pressing Q on the RKE transmitter. This feature can be changed. See “Vehicle Locator Lights” under Vehicle Personalization 0 148.
Exit Lighting Some exterior lamps and interior lights come on at night, or in areas with limited lighting, when the driver door is opened after the ignition is turned off. The dome lamp comes on after the ignition is changed to the OFF position. The exterior lamps and dome lamp remain on for a set amount of time, then automatically turn off. The exterior lamps turn off immediately by turning the exterior lamp control off. This feature can be changed. See Vehicle Personalization 0 148.
Battery Power Protection The battery saver feature is designed to protect the vehicle's battery. If some interior lamps are left on and the ignition is turned off, the battery rundown protection system automatically turns the lamp off after some time.
Lighting
167
Exterior Lighting Battery Saver The exterior lamps turn off about 10 minutes after the ignition is turned off, if the parking lamps or headlamps have been manually left on. This protects against draining the battery. To restart the 10-minute timer, turn the exterior lamp control to the O position and then back to the ; or 2 position. To keep the lamps on for more than 10 minutes, the ignition must be in the ACC/ACCESSORY or ON/RUN/ START position.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Infotainment System
168
Infotainment SystemIntroduction
Infotainment . . . . . . . . . . . . . . . . . . 168
Theft-Deterrent Feature . . . . . . 169
Overview . . . . . . . . . . . . . . . . . . . . . 170
Home Page . . . . . . . . . . . . . . . . . . 171
Software Updates . . . . . . . . . . . . 174Radio
AM-FM Radio . . . . . . . . . . . . . . . . 174
Satellite Radio . . . . . . . . . . . . . . . . 176
Radio Reception . . . . . . . . . . . . . . 177
Backglass Antenna . . . . . . . . . . . 178
Multi-Band Antenna . . . . . . . . . . 178Audio Players
CD Player . . . . . . . . . . . . . . . . . . . . 179
USB Port . . . . . . . . . . . . . . . . . . . . . 181
SD Card Reader . . . . . . . . . . . . . . 184
Auxiliary Jack . . . . . . . . . . . . . . . . 184OnStar System
OnStar System . . . . . . . . . . . . . . . 185
Performance Data Recorder (PDR) Performance Data
Recorder (PDR) . . . . . . . . . . . . . 186
Phone
Bluetooth (Overview) . . . . . . . . . 191
Bluetooth (InfotainmentControls) . . . . . . . . . . . . . . . . . . . . 192
Bluetooth (Voice
Recognition) . . . . . . . . . . . . . . . . 196
Trademarks and License Agreements
Trademarks and License
Agreements . . . . . . . . . . . . . . . . . 201
Introduction
Infotainment Base radio information is included in this manual. See the infotainment manual for information on other available infotainment systems. Read the following pages to become familiar with these features.
{ Warning
Taking your eyes off the road for too long or too often while using any infotainment feature can cause a crash. You or others could be injured or killed. Do not give extended attention to infotainment tasks while driving. Limit your glances at the vehicle displays and focus your attention on driving. Use voice commands whenever possible.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
Infotainment System
169
Theft-Deterrent Feature TheftLock® is designed to discourage theft of the vehicle's radio by learning a portion of the Vehicle Identification Number (VIN). The radio does not operate if it is stolen or moved to a different vehicle.
The infotainment system has built-in features intended to help avoid distraction by disabling some functions when driving. These functions may gray out when they are unavailable. Many infotainment features are also available through the instrument cluster and steering wheel controls. Before driving: . Become familiar with the
operation, faceplate buttons, and screen buttons.
. Set up the audio by presetting
favorite stations, setting the tone, and adjusting the speakers.
. Set up phone numbers in
advance so they can be called easily by pressing a single button or by using a single voice command if equipped with Bluetooth phone capability. See Defensive Driving 0 216. To play the infotainment system with the ignition off, see Retained Accessory Power (RAP) 0 235.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
170
Infotainment System
Overview
Infotainment System Overview The infotainment system is controlled by using the buttons on the faceplate and steering wheel controls.
1. FAV (Favorite Pages)
. Press to scroll through the
favorite pages for each source.
2. O (Power/Volume)
. Press to turn the audio on
or off.
. Press and hold to clear the
screen and display the time.
. Press to mute the system.
Press again to unmute.
. Turn the knob to adjust the
volume.
3. 7 (Seek Previous/Fast
Reverse) . Press to seek to the
beginning of the current or previous track. If the track has been playing for less than five seconds, it seeks the previous track. If longer than five seconds, the current track starts from the beginning.
. Press and hold to quickly reverse through a track. Release the button to return to playing speed. See CD Player 0 179.
. For AM, FM, or SiriusXM® (if equipped), press to seek to the previous strong station.
Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 9085354) - 2016 - crc - 7/30/15
4. 6 (Seek Next/Fast Forward)
. Press to seek the next
track.
. Press and hold to fast
forward through a track. Release the button to return to playing speed. See CD Player 0 179.
. For AM, FM, or SiriusXM (if equipped), press to seek to the next strong station.
5. MENU
. Press to access the menu
for the current audio source.
. Press to select the
highlighted menu option.
. Turn to scroll through a list.
6. { (Home Page)
. See “Home Page” following.
7. S BACK
. Press to return to the
previous screen in a menu.
. On a page accessed directly by a faceplate button or Home Page screen button, press S BACK to go to the previous menu.
8. PHONE
. See Bluetooth (Infotainment
Controls) 0 192 or Bluetooth (Voice Recognition) 0 196 or Bluetooth (Overview) 0 191.
9. MEDIA
. Press to change the audio source between CD, USB, SD Card, and AUX.
10. RADIO
. Press to change the audio source between AM, FM, or SiriusXM (if equipped).
Home Page
Home Page Features The infotainment system displays a
