Login- Download PDF Manual
-
Gauge . . . . . . . . . . . . . . . . . . . . . . 5-13
Safety Belt Reminders . . . . . . . 5-13
Airbag Readiness Light . . . . . . 5-14
Passenger Airbag StatusIndicator . . . . . . . . . . . . . . . . . . . . 5-15
Charging System Light . . . . . . 5-15
MalfunctionIndicator Lamp . . . . . . . . . . . . . 5-16
Brake System Warning
Light . . . . . . . . . . . . . . . . . . . . . . . 5-18
Parking Brake Light . . . . . . . . . . 5-19
Service Electric Parking BrakeLight . . . . . . . . . . . . . . . . . . . . . . . 5-19
Antilock Brake System (ABS)
Warning Light . . . . . . . . . . . . . . 5-20
Lane Departure Warning
(LDW) Light . . . . . . . . . . . . . . . . 5-20
Vehicle Ahead Indicator . . . . . . 5-20
Traction Off Light . . . . . . . . . . . . 5-21
StabiliTrak® OFF Light . . . . . . . 5-21
Traction Control System(TCS)/StabiliTrak® Light . . . . 5-21
Engine Coolant Temperature
Warning Light . . . . . . . . . . . . . . 5-22
Tire Pressure Light . . . . . . . . . . 5-22
Engine Oil Pressure Light . . . . 5-23
Low Fuel Warning Light . . . . . . 5-23
Security Light . . . . . . . . . . . . . . . . 5-23
High-Beam On Light . . . . . . . . . 5-24Adaptive Forward Lighting
(AFL) Light . . . . . . . . . . . . . . . . . 5-24
Lamps On Reminder . . . . . . . . . 5-24
Cruise Control Light . . . . . . . . . 5-24Information Displays
Driver Information
Center (DIC) . . . . . . . . . . . . . . . 5-25
Head-Up Display (HUD) . . . . . 5-28Vehicle Messages
Vehicle Messages . . . . . . . . . . . 5-32
Battery Voltage and ChargingMessages . . . . . . . . . . . . . . . . . . 5-32
Brake System Messages . . . . 5-32
Compass Messages . . . . . . . . . 5-33
Cruise Control Messages . . . . 5-33
Door Ajar Messages . . . . . . . . . 5-34
Engine Cooling SystemMessages . . . . . . . . . . . . . . . . . . 5-34
Engine Oil Messages . . . . . . . . 5-35
Engine Power Messages . . . . 5-35
Fuel System Messages . . . . . . 5-35
Key and Lock Messages . . . . . 5-36
Lamp Messages . . . . . . . . . . . . . 5-36
Object Detection SystemMessages . . . . . . . . . . . . . . . . . . 5-37
Ride Control System
Messages . . . . . . . . . . . . . . . . . . 5-39
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (2,1)
5-2
Instruments and Controls
Airbag System Messages . . . . 5-40
Security Messages . . . . . . . . . . 5-40
Service Vehicle Messages . . . 5-40
Starting the VehicleMessages . . . . . . . . . . . . . . . . . . 5-40
Tire Messages . . . . . . . . . . . . . . . 5-41
Transmission Messages . . . . . 5-41
Vehicle ReminderMessages . . . . . . . . . . . . . . . . . . 5-42
Vehicle Speed Messages . . . . 5-42
Washer Fluid Messages . . . . . 5-42Vehicle Personalization
Vehicle Personalization . . . . . . 5-43
Universal Remote System
Universal Remote System . . . 5-50
Universal Remote SystemProgramming . . . . . . . . . . . . . . . 5-50
Universal Remote System
Operation . . . . . . . . . . . . . . . . . . 5-53
Controls
Steering Wheel Adjustment
Do not adjust the steering wheel while driving.
Steering Wheel Controls
To adjust the steering wheel: 1. Pull the lever down. 2. Move the steering wheel up
or down.
3. Pull or push the steering wheel
closer or away from you.
4. Pull the lever up to lock the
steering wheel in place.
If equipped with audio steering wheel controls, some audio controls can be adjusted at the steering wheel. g (Push to Talk): Press to talk or interact with OnStar® and Bluetooth®. See OnStar Overview on page 14-1 and “Bluetooth” in the infotainment manual.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (3,1)
c (End Call): Press to decline an incoming call, or end a current call. Press to mute or unmute the infotainment system.
Instruments and Controls
5-3
SEL (Select): Press to select a highlighted menu option. C or B (Next or Previous Favorite): Press to go to the next or previous favorite when listening to the radio. Press to go to the next or previous track when listening to a media source. x + or x − (Volume): Press to increase or decrease the volume.
Heated Steering Wheel
The steering wheel takes about three minutes to be fully heated.
Horn Press a on the steering wheel pad to sound the horn.
Windshield Wiper/Washer
S or T (Previous or Next): Press the five-way control to the left or right to go to the previous or next area in the display or to the previous or next menu. y or z (Next or Previous): Press the five-way control up or down to go up or down in a list. Press to go up or down a page.
( (Heated Steering Wheel): Press to turn the heated steering wheel on or off. A light next to the button displays when the feature is turned on.
With the ignition in ACC/ ACCESSORY or ON/RUN/START, move the windshield wiper lever to select the wiper speed. HI: Use for fast wipes. LO: Use for slow wipes.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (4,1)
5-4
Instruments and Controls
INT (Intermittent Wipes): Move the lever up to INT for intermittent wipes, then turn the x INT band up for more frequent wipes or down for less frequent wipes. If the windshield wipers are in use for about six seconds while driving, the exterior lamps come on automatically if the exterior lamp control is in AUTO. See “Lights On with Wipers” under Automatic Headlamp System on page 6-4. OFF: Use to turn the wipers off. 1X (Mist): For a single wipe, briefly move the wiper lever down. For several wipes, hold the wiper lever down.
Clear snow and ice from the wiper blades and windshield before using them. If frozen to the windshield, carefully loosen or thaw them. Damaged blades should be replaced. See Wiper Blade Replacement on page 10-28. Heavy snow or ice can overload the wiper motor.
Wiper Parking If the ignition is put in OFF while the wipers are on LO, HI, or INT, they will immediately stop. If the windshield wiper lever is then moved to OFF before the driver door is opened or within 10 minutes, the wipers will restart and move to the base of the windshield. If the ignition is put in OFF while the wipers are performing wipes due to windshield washing, the wipers continue to run until they reach the base of the windshield.
Rainsense™ If equipped with Rainsense, a sensor near the top center of the windshield detects the amount of water on the windshield and controls the frequency of the windshield wiper. Keep this area of the windshield clear of debris to allow for best system performance. INT (Rainsense Wipe Sensitivity Control): Move the windshield wiper lever to INT. Turn the x INT band on the wiper lever to adjust the sensitivity.
Turn the band up for more sensitivity to moisture. Turn the band down for less sensitivity to moisture.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (5,1)
Instruments and Controls
5-5
. Move the windshield wiper lever
out of the INT position to deactivate Rainsense.
This feature can be changed. See “Comfort and Convenience” under Vehicle Personalization on page 5-43.
Wiper Arm Assembly Protection When using an automatic car wash, move the windshield wiper lever to OFF. This disables the automatic Rainsense windshield wipers. With Rainsense, if the transmission is in N (Neutral) and the vehicle speed is very slow, the wipers will automatically stop at the base of the windshield. The wiper operations return to normal when the transmission is no longer in N (Neutral) or the vehicle speed has increased. n L (Windshield Washer): Pull the windshield wiper lever toward you to spray windshield washer fluid and activate the wipers. The wipers will continue until the lever is
released or the maximum wash time is reached. When the windshield wiper lever is released, additional wipes may occur depending on how long the windshield washer had been activated. See Washer Fluid on page 10-22 for information on filling the windshield washer fluid reservoir.
{ Warning
In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision.
Headlamp Washer If equipped with headlamp washers, they are located to the side of the headlamps. The headlamps must be on in order to use the headlamp washers. If the headlamps are not on, only the windshield will be washed.
Pull the wiper lever toward you and hold briefly to activate. The headlamp washers will spray once, pause, and spray again. The headlamp washer will spray again after five windshield wash cycles. To refill the windshield washer fluid, see Washer Fluid on page 10-22.
Compass The vehicle may have a compass display on the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak®, and vehicle speed information. The compass system is designed to operate for a certain number of miles or degrees of turn before needing a signal from the GPS satellites. When the compass display shows CAL, drive the vehicle for a short distance in an open area where it can receive a GPS signal. The compass system
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (6,1)
5-6
Instruments and Controls
will automatically determine when a GPS signal is restored and provide a heading again. See Compass Messages on page 5-33 for the messages that may be displayed for the compass.
Clock (Base Radio)
Setting the Time To set the time: 1. Select Settings from the Home
Page and select Set Time.
2. Turn the MENU knob to increase
or decrease the hour.
3. Press the MENU knob to go to the next option. Press S BACK to go to the last menu and save the changes.
AUTO SET In the Set Time view, push on the area just above the chrome bar and below the "AUTO SET" screen button to turn on/off the Auto Time adjust capability.
Clock (Uplevel Radio) The infotainment system controls are used to access the time and date settings through the menu system. See “Home Page” in the infotainment manual for information about how to use the menu system. Setting the Clock
Time To set the time: 1. From the Home Page, press the SETTINGS screen button, then press Time and Date.
2. Press Set Time, then press + or − to increase or decrease hours or minutes, and change AM or PM.
3. Press 12Hr or 24Hr for a 12 or
24 hour clock.
4. Press [ to go back to the
previous menu.
Date To set the date: 1. Press the SETTINGS screen
button and press Time and Date. 2. Press Set Date and press + or −
to increase or decrease month, day, or year.
3. Press [ to go back to the
previous menu.
Auto Set When on, the time and date will automatically update. To set auto set: 1. Press the SETTINGS screen
button, then press Time and Date.
2. Press Set Time or Set Date. 3. Press Auto Set, then select
On-Cell Network or Off-Manual to manually set the time and date.
4. Press [ to go back to the
previous menu.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (7,1)
Instruments and Controls
5-7
If auto timing is set, the time displayed on the clock may not update immediately when driving into a new time zone.
Clock Display When on, the digital clock will display on the infotainment screen. To set the clock display: 1. Press the SETTINGS screen
button and press Time and Date. 2. Press Clock Display, then select
Off or On.
3. Press [ to go back to the
previous menu.
Power Outlets The accessory power outlets can be used to plug in electrical equipment, such as a cell phone or MP3 player. The vehicle has two accessory power outlets:
Inside the front storage bin below the climate control system.
. On the rear of the center floor
console.
Lift the cover to access the accessory power outlet. Certain electrical accessories may not be compatible with the accessory power outlet and could overload a vehicle circuit breaker or adapter fuse. If overloaded, the circuit breaker will reset after all devices are disconnected or if Retained Accessory Power (RAP) is turned off and then back on. See Retained Accessory Power (RAP) on page 9-21. Wait one minute to allow the circuit breaker to reset before reconnecting devices or turning RAP back on. If the problem continues, the issue could be within your device. Try another known good device to make sure the circuit breaker is operating properly. If this does not resolve your problem, see your dealer. It is possible to replace the factory power outlet with a cigar lighter receptacle, if desired. This requires the factory installed circuit breaker
to be replaced with a standard minifuse by the dealer. A minifuse will not reset and will have to be replace if blown.
{ Caution
Failure to replace the circuit breaker with the minifuse could overheat the cigar lighter and damage the vehicle.
When adding electrical equipment, be sure to follow the proper installation instructions included with the equipment. See Add-On Electrical Equipment on page 9-72.
{ Caution
Hanging heavy equipment from the power outlet can cause damage not covered by the vehicle warranty. The power outlets are designed for accessory power plugs only, such as cell phone charge cords.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (8,1)
5-8
Instruments and Controls
Always unplug electrical equipment when not in use and do not plug in equipment that exceeds the maximum 20 amps rating. Power Outlet 110 Volt Alternating Current If equipped, this power outlet is on the rear of the center floor console. It can be used to plug in electrical equipment that uses a maximum limit of 150 watts. An indicator light on the outlet turns on to show it is in use. The light comes on when the ignition is in ON/RUN/START, equipment requiring less than 150 watts is plugged into the outlet, and no system fault is detected. The indicator light does not come on when the ignition is in LOCK/OFF or if the equipment is not fully seated into the outlet. If equipment is connected using more than 150 watts or a system fault is detected, a protection circuit shuts off the power supply and the
indicator light turns off. To reset the circuit, unplug the item and plug it back in or turn the Retained Accessory Power (RAP) off and then back on. See Retained Accessory Power (RAP) on page 9-21. The power restarts when equipment using 150 watts or less is plugged into the outlet and a system fault is not detected. The power outlet is not designed for the following and may not work properly, if this equipment is plugged in: . Equipment with high initial peak
wattage such as: compressor-driven refrigerators and electric power tools.
. Other equipment requiring an extremely stable power supply such as: microcomputer-controlled electric blankets, touch sensor lamps, etc.
Warning Lights, Gauges, and Indicators Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges could prevent injury. Warning lights come on when there could be a problem with a vehicle function. Some warning lights come on briefly when the engine is started to indicate they are working. Gauges can indicate when there could be a problem with a vehicle function. Often gauges and warning lights work together to indicate a problem with the vehicle.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (9,1)
Instruments and Controls
5-9
When one of the warning lights comes on and stays on while driving, or when one of the gauges shows there may be a problem, check the section that explains what to do. Follow this manual's advice. Waiting to do repairs can be costly and even dangerous.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (10,1)
5-10
Instruments and Controls
Instrument Cluster
English Shown, Metric Similar
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (11,1)
Cluster Application Displays The cluster has three interactive display zones. Use the five-way control on the right steering wheel control to move between the different display zones and scroll through the different displays. The left and right zones display Driver Information Center (DIC) information. See Driver Information Center (DIC) on page 5-25. The center zone displays application information for navigation, audio, phone, or settings. A speedometer can also be displayed in this center zone.
Navigation If there is no active route, a compass will be displayed. If there is an active route, press SEL to end route guidance or turn the voice prompts on or off.
Instruments and Controls
5-11
Audio While the Audio application page is displayed, press SEL to enter the Audio menu. In the Audio menu search for music, select from favorites, or change the audio source.
Phone While the Phone application page is displayed, press SEL to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls, select from favorites, or scroll through contacts. If there is an active call, mute the phone or switch to handset operation.
Settings Press SEL while the Settings application page is displayed to enter the Settings menu. Units: Press SEL while Units is highlighted to enter the Units menu. Choose English or metric units by pressing SEL while the desired item is highlighted. A checkmark will be displayed next to the selected item.
Info Pages: Press SEL while Info Pages is highlighted to select the items to be displayed in the DIC information displays. See Driver Information Center (DIC) on page 5-25. Open Source Software: Press SEL while Open Source Software is highlighted to display open source software information.
Speedometer The speedometer shows the vehicle's speed in either kilometers per hour (km/h) or miles per hour (mph).
Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles. This vehicle has a tamper-resistant odometer. If the vehicle needs a new cluster installed, the new odometer is set to the mileage of the old odometer. If this is not
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (12,1)
5-12
Instruments and Controls
possible, it is set at zero and a label is put on the driver door to show the old mileage reading.
Trip Odometer The trip odometer can show how far the vehicle has been driven since the trip odometer was last reset. The trip odometer is accessed and reset through the Driver Information Center (DIC). See Driver Information Center (DIC) on page 5-25.
Tachometer The tachometer displays the engine speed in revolutions per minute (rpm).
{ Caution
If the engine is operated with the tachometer in the shaded warning area, the vehicle could be damaged, and the damages
(Continued)
Caution (Continued)
would not be covered by the vehicle warranty. Do not operate the engine with the tachometer in the shaded warning area.
Fuel Gauge
When the ignition is on, the fuel gauge indicates about how much fuel is left in the tank.
There is an arrow near the fuel gauge pointing to the side of the vehicle the fuel door is on. When the indicator nears empty, the low fuel light comes on. There still is a little fuel left, but the vehicle should be refueled soon. Here are four things that some owners ask about. None of these show a problem with the fuel gauge: . At the service station, the fuel
pump shuts off before the gauge reads full. It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it actually took a little more or less than half the tank's capacity to fill the tank. The gauge moves a little while turning a corner or speeding up.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (13,1)
The gauge takes a few seconds to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off.
Engine Coolant Temperature Gauge
Instruments and Controls
5-13
Safety Belt Reminders
Driver Safety Belt Reminder Light There is a driver safety belt reminder light on the instrument cluster.
English
This gauge measures the temperature of the vehicle's engine. While driving under normal operating conditions, if the needle moves into the shaded area, the engine is too hot. Pull off the road, stop the vehicle, and turn off the engine as soon as possible.
Metric
When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving. If the driver safety belt is buckled, neither the light nor the chime comes on.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (14,1)
5-14
Instruments and Controls
Passenger Safety Belt Reminder Light There is a passenger safety belt reminder light near the passenger airbag status indicator. See Passenger Sensing System on page 3-26.
When the vehicle is started, this light flashes and a chime may come on to remind passengers to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle continues several times if the passenger remains or becomes unbuckled while the vehicle is moving. If the passenger safety belt is buckled, neither the chime nor the light comes on.
The front passenger safety belt warning light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the warning light and/or chime, remove the object from the seat or buckle the safety belt.
Airbag Readiness Light This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System on page 3-19.
The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately.
{ Warning
If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.
If there is a problem with the airbag system, a Driver Information Center (DIC) message may also come on. See Airbag System Messages on page 5-40.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (15,1)
Instruments and Controls
5-15
Passenger Airbag Status Indicator The vehicle has a passenger sensing system. See Passenger Sensing System on page 3-26 for important safety information. The passenger airbag status indicator is in the overhead console.
United States
Canada and Mexico
When the vehicle is started, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off for several seconds
as a system check. Then, after several more seconds, the status indicator will light either ON or OFF, or the on or off symbol to let you know the status of the front outboard passenger frontal airbag and knee airbag. If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the front outboard passenger frontal airbag and knee airbag are allowed to inflate. If the word OFF or the off symbol is lit on the airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag and knee airbag. If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service.
{ Warning
If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light on page 5-14 for more information, including important safety information.
Charging System Light
The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (16,1)
5-16
Instruments and Controls
a check to show the light is working. It should go out when the engine is started. If the light stays on, or comes on while driving, there may be a problem with the electrical charging system. Have it checked by your dealer. Driving while this light is on could drain the battery. When this light comes on, or is flashing, the Driver Information Center (DIC) also displays a message. See Battery Voltage and Charging Messages on page 5-32. If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio and air conditioner.
Malfunction Indicator Lamp A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors the operation of the vehicle to ensure emissions
are at acceptable levels, helping to maintain a clean environment. The malfunction indicator lamp comes on when the vehicle is placed in Service Only Mode, as a check to show it is working. If it does not, have the vehicle serviced by your dealer. See Ignition Positions on page 9-16.
If the malfunction indicator lamp comes on while the engine is running, this indicates that the OBD II system has detected a problem and diagnosis and service might be required. Malfunctions often are indicated by the system before any problem is apparent. Being aware of the light can prevent more serious damage to the vehicle. This system also
assists the service technician in correctly diagnosing any malfunction.
{ Caution
If the vehicle is continually driven with this light on, the emission controls might not work as well, the vehicle fuel economy might not be as good, and the engine might not run as smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.
{ Caution
Modifications made to the engine, transmission, exhaust, intake, or fuel system of the vehicle or the replacement of the original tires with other than those of the same Tire Performance Criteria
(Continued)
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (17,1)
Caution (Continued)
(TPC) can affect the vehicle's emission controls and can cause this light to come on. Modifications to these systems could lead to costly repairs not covered by the vehicle warranty. This could also result in a failure to pass a required Emission Inspection/Maintenance test. See Accessories and Modifications on page 10-3.
This light comes on during a malfunction in one of two ways: Light Flashing: A misfire condition has been detected. A misfire increases vehicle emissions and could damage the emission control system on the vehicle. Diagnosis and service might be required. To prevent more serious damage to the vehicle: . Reduce vehicle speed.
Instruments and Controls
5-17
. Avoid hard accelerations. . Avoid steep uphill grades.
If towing a trailer, reduce the amount of cargo being hauled as soon as it is possible.
If the light continues to flash, find a safe place to stop and park the vehicle. Turn the vehicle off, wait at least 10 seconds, and restart the engine. If the light is still flashing, follow the previous steps and see your dealer for service as soon as possible. Light On Steady: An emission control system malfunction has been detected on the vehicle. Diagnosis and service might be required. The following may correct an emission control system malfunction: . Check that the fuel cap is fully
installed. See Filling the Tank on page 9-65. The diagnostic system can determine if the fuel cap has been left off or
improperly installed. A loose or missing fuel cap allows fuel to evaporate into the atmosphere. A few driving trips with the cap properly installed should turn the light off.
. Check that good quality fuel is used. Poor fuel quality causes the engine not to run as efficiently as designed and may cause stalling after start-up, stalling when the vehicle is changed into gear, misfiring, hesitation on acceleration, or stumbling on acceleration. These conditions might go away once the engine is warmed up. If one or more of these conditions occurs, change the fuel brand used. It may require at least one full tank of the proper fuel to turn the light off. See Recommended Fuel on page 9-62. If none of the above have made the light turn off, your dealer can check the vehicle. The dealer has the proper test equipment and
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (18,1)
5-18
Instruments and Controls
diagnostic tools to fix any mechanical or electrical problems that might have developed. Emissions Inspection and Maintenance Programs Depending on where you live, your vehicle may be required to participate in an emission control system inspection and maintenance program. For the inspection, the emission system test equipment will likely connect to the vehicle's Data Link Connector (DLC).
The DLC is under the instrument panel to the left of the steering wheel. See your dealer if assistance is needed.
The vehicle may not pass inspection if:
The malfunction indicator lamp is on with the engine running, or if the vehicle is placed in Service Only Mode and the malfunction indicator lamp does not come on. See your dealer for assistance in verifying proper operation of the malfunction indicator lamp. The OBD II (On-Board Diagnostics) system determines that critical emission control systems have not been completely diagnosed. The vehicle would be considered not ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down. The diagnostic system is designed to evaluate critical emission control systems during normal driving. This can take several days of routine driving. If this has been done and the vehicle still does not pass the inspection for lack of OBD II
system readiness, your dealer can prepare the vehicle for inspection.
Brake System Warning Light The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working. If the warning light comes on, there is a brake problem. Have the brake system inspected right away.
Metric
English
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (19,1)
This light comes on briefly when the vehicle is turned on. If it does not come on then, have it fixed so it will be ready to warn if there is a problem. If the light comes on and stays on, there is a base brake problem.
{ Warning
The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.
Instruments and Controls
5-19
Parking Brake Light
Service Electric Parking Brake Light
Metric
English
This light comes on when the parking brake is applied. If the light continues flashing after the parking brake is released, or while driving, there is a problem with the Electric Parking Brake system or another system. A message may also display in the Driver Information Center (DIC). See Brake System Messages on page 5-32. If the light does not come on, or remains flashing, see your dealer.
This light should come on briefly when starting the vehicle. If it does not come on, have it fixed so it will be ready to warn if there is a problem. If this light stays on, there is a problem with the Electric Parking Brake system or another system on the vehicle that is causing the parking brake system to work at a reduced level. The vehicle can still be driven, but should be taken to a dealer as soon as possible. See the information for the Electric Parking Brake under Parking Brake (Electric) on page 9-30 or Parking Brake (Manual) on page 9-32. If a
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (20,1)
5-20
Instruments and Controls
message displays in the Driver Information Center (DIC), see Brake System Messages on page 5-32.
Antilock Brake System (ABS) Warning Light
This light comes on briefly when the engine is started. If it does not, have the vehicle serviced by your dealer. If the ABS light stays on, turn the ignition off. If the light comes on while driving, stop as soon as it is safely possible and turn off the vehicle. Then start the engine again to reset the system. If the ABS light stays on, or comes on again while driving, the
vehicle needs service. A chime may also sound when the light comes on steady. If the ABS light is the only light on, the vehicle has regular brakes, but the antilock brakes are not functioning. If both the ABS and the brake system warning light are on, the vehicle's antilock brakes are not functioning and there is a problem with the regular brakes. See your dealer for service. See Brake System Warning Light on page 5-18 and Brake System Messages on page 5-32.
Lane Departure Warning (LDW) Light
If equipped, this light briefly comes on while starting the vehicle. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off. This light comes on green when the system is on and ready to operate. When the system determines that the vehicle is leaving its lane without using the turn signal, this light will change to amber and flash. See Lane Departure Warning (LDW) on page 9-60.
Vehicle Ahead Indicator
If equipped, this light in the Driver Information Center (DIC) displays green when a vehicle is detected ahead.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (21,1)
Instruments and Controls
5-21
This light will display amber when you are following a vehicle ahead much too closely. See Forward Collision Alert (FCA) System on page 9-53.
Traction Off Light
This light and the StabiliTrak OFF light come on when StabiliTrak is turned off. If the TCS is off, wheel spin is not limited. Adjust driving accordingly. See Traction Control/Electronic Stability Control on page 9-33.
StabiliTrak® OFF Light
If the StabiliTrak and TCS are off, the system does not assist in controlling the vehicle. Turn on the TCS and the StabiliTrak systems and the warning light turns off. See Traction Control/Electronic Stability Control on page 9-33.
Traction Control System (TCS)/StabiliTrak® Light
This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off. The traction off light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/StabiliTrak button.
This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the StabiliTrak system is turned off. If StabiliTrak is off, the Traction Control System (TCS) is also off.
This light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light is on and not flashing, the TCS, and potentially the StabiliTrak system have been disabled. A DIC
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (22,1)
5-22
Instruments and Controls
message may display. Check the DIC messages to determine which feature(s) is no longer functioning and whether the vehicle requires service. If the indicator/warning light is on and flashing, the TCS and/or the StabiliTrak system is actively working. See Traction Control/Electronic Stability Control on page 9-33.
Engine Coolant Temperature Warning Light
This light comes on briefly while starting the vehicle.
If it does not, have the vehicle serviced by the dealer. If the system is working normally the indicator light goes off.
{ Caution
The engine coolant temperature warning light indicates that the vehicle has overheated. Driving with this light on can damage the engine and it may not be covered by the vehicle warranty. See Engine Overheating on page 10-20.
The engine coolant temperature warning light comes on when the engine has overheated. If this happens, pull over and turn off the engine as soon as possible. See Engine Overheating on page 10-20.
Tire Pressure Light
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS.
When the Light Is On Steady This indicates that one or more of the tires are significantly underinflated. A Driver Information Center (DIC) tire pressure message may also display. See Tire Messages on page 5-41. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label. See Tire Pressure on page 10-47.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (23,1)
Instruments and Controls
5-23
When the Light Flashes First and Then Is On Steady If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle. See Tire Pressure Monitor Operation on page 10-50.
Engine Oil Pressure Light
low can also damage the
{ Caution Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil.
This light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. See your dealer.
Low Fuel Warning Light
This light is near the fuel gauge and comes on briefly when the ignition is turned on as a check to show it is working. It also comes on when the fuel tank is low on fuel. The light turns off when fuel is added. If it does not, have the vehicle serviced.
Security Light
The security light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (24,1)
5-24
Instruments and Controls
If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system. See Immobilizer Operation on page 2-18.
High-Beam On Light
This light comes on when the IntelliBeam system is enabled. See Exterior Lamp Controls on page 6-1.
Adaptive Forward Lighting (AFL) Light
This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer on page 6-3. IntelliBeam® Light
This light should come on briefly as the vehicle is started. If it does not come on, have the vehicle serviced by your dealer. This light comes on solid when there is a problem with the AFL system. It flashes when the system is switching between lighting modes. See Adaptive Forward Lighting (AFL) on page 6-5.
Lamps On Reminder
This light comes on when the exterior lamps are in use. See Exterior Lamp Controls on page 6-1.
Cruise Control Light
The cruise control light is white when the cruise control is on and ready, and turns green when the cruise control is set and active. See Cruise Control on page 9-37.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (25,1)
Instruments and Controls
5-25
Adaptive Cruise Control Light
Information Displays
Driver Information Center (DIC) The DIC displays are shown in the left and right interactive display zones on the instrument cluster. The displays show the status of many vehicle systems. The controls for the DIC are on the right steering wheel control.
This light in the Driver Information Center (DIC) comes on when the Adaptive Cruise Control (if equipped) is active. See Adaptive Cruise Control on page 9-40.
S or T : Press to move between the interactive display zones in the cluster. Press S to go back to the previous menu. SEL (Select): Press to open a menu or select a menu item. Press and hold to reset values on certain screens. DIC Information Display Options The information displays on the DIC can be turned on or off through the Settings menu. 1. Press SEL while viewing the
Settings page in the center display zone on the cluster.
2. Scroll to Info Pages and
press SEL.
3. Press y or z to move through
the list of possible information displays.
y or z : Press to move up or down in a list.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (26,1)
5-26
Instruments and Controls
4. Press SEL while an item is
highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it.
DIC Information Displays The following is the list of all possible DIC information displays. Some of the information displays may not be available for your particular vehicle. Speed: Shows the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph). Trip 1 and Trip 2 (Base Cluster) / Trip 1 or Trip 2 and Average Fuel Economy (Uplevel Cluster): Shows the current distance traveled, in either kilometers (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset by pressing and holding SEL while this display is active.
The average fuel economy shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. The Average Fuel Economy can be reset along with the trip odometer by pressing and holding SEL while this display is active. Fuel Range: Shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. Average Fuel Economy (Base Cluster): Shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the
last time this menu item was reset. The Average Fuel Economy can be reset by pressing and holding SEL while this display is active. Instantaneous Fuel Economy: Shows the current fuel economy in either liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the fuel economy that the vehicle has right now and changes frequently as driving conditions change. Average Speed: Shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active. Timer: This display can be used as a timer. To start the timer, press SEL while this display is active. The display will show the amount of time
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (27,1)
Instruments and Controls
5-27
that has passed since the timer was last reset. To stop the timer, press SEL briefly while this display is active and the timer is running. To reset the timer to zero, press and hold SEL while this display is active. Compass (Base Cluster): Shows the direction the vehicle is driving. Turn Arrow: Shows the next maneuver when using route guidance. Travel Time: Shows the estimated time duration remaining for the current route. Distance to Destination: Shows the distance to the destination when using route guidance. Speed Limit: Shows the current speed limit on vehicles with the navigation system. The information for this page comes from a roadway database. Speed Warning: Allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when Speed
Warning is displayed. Press y or z to adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed and a chime may sound. Cruise Set Speed: Shows the speed the cruise control or Adaptive Cruise Control (ACC, if equipped) is set to. Follow Distance Indicator/Gap Setting: The current follow time to the vehicle ahead is displayed as a time value on this page when ACC is not engaged. When ACC has been engaged, the Follow Distance Indicator page switches to the Gap Setting page. This page shows the current gap setting along with the vehicle ahead telltale. Battery Voltage: Shows the current battery voltage.
Oil Life: Shows an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. See Engine Oil Messages on page 5-35. The oil should be changed as soon as possible. See Engine Oil on page 10-10. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule. See Maintenance Schedule on page 11-3. The Oil Life display must be reset after each oil change. It will not reset itself. Do not to reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (28,1)
5-28
Instruments and Controls
seconds while the Oil Life display is active. See Engine Oil Life System on page 10-12. Tire Pressure: Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System on page 10-49 and Tire Pressure Monitor Operation on page 10-50. Vehicle Odometer (Base Cluster): Shows the odometer. Blank Page: The Blank Page display allows for no information to be displayed in the DIC display zone(s).
Head-Up Display (HUD)
{ Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.
If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The information is projected through the HUD lens on the driver side of the instrument panel and focused out toward the front of the vehicle.
{ Caution
If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.
The HUD information can be displayed in various languages. The speedometer reading and other numerical values can be displayed in either English or metric units. The language selection is changed through the radio and the units of measurement is changed through the instrument cluster. See Vehicle Personalization on page 5-43 and “Settings” under Instrument Cluster on page 5-10.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (29,1)
Instruments and Controls
5-29
Lane Departure Low Fuel
Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls. See Vehicle Messages on page 5-32.
HUD Display on the Vehicle
Windshield
The HUD may display some of the following vehicle information and vehicle messages or alerts: . Speed
Tachometer
. Audio . Phone . Navigation . Collision Alert . Cruise Control
The HUD control is to the left of the steering wheel. To adjust the HUD image: 1. Adjust the driver seat to a
comfortable position.
2. Start the engine. Use the following settings to adjust the HUD.
$ (Image Adjustment): Press down or lift up to center the HUD image. The HUD image can only be adjusted up and down, not side to side. ! (Display View): Press to select the display view. Each press will change the display view. D (Image Brightness): Lift up and hold to brighten the display. Press down and hold to dim the display. Hold down to turn the display off. The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed. The HUD image can temporarily light up depending on the angle and position of the sunlight on the HUD display. This is normal. Polarized sunglasses could make the HUD image harder to see.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (30,1)
5-30
Instruments and Controls
HUD Views There are four views in the HUD. Some vehicle information and vehicle messages or alerts may be displayed in any view.
information only appears on vehicles that have these features, and when they are active.
All HUD views may briefly display audio information when the driver uses the steering wheel controls to adjust the audio settings appearing in the instrument cluster. Incoming phone calls appearing in the instrument cluster, may also display in any HUD view.
Metric
Metric
Metric
English
Speed View: This display gives the speedometer reading (in English or metric units), Adaptive Cruise Control speed, Forward Collision Alert, Lane Departure Warning, and Vehicle Ahead indicator. Some
English
Audio/Phone View: This display includes the information in speed view along with audio/phone information. The current radio station, media type, and incoming calls will be displayed.
English
Navigation View: This display includes the information in speed view along with Turn-by-Turn
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (31,1)
Instruments and Controls
5-31
If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. See Windshield Replacement on page 10-28.
Navigation information. The compass heading is displayed when navigation routing is not active. Navigation Turn-by-Turn Alerts shown in the instrument cluster may also be displayed in any HUD view.
Metric
English
Performance View: This display gives the speedometer reading (in English or metric units), rpm reading, transmission positions, and gear shift indicator.
Care of the HUD Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image. Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it. HUD Troubleshooting Check that: . Nothing is covering the
HUD lens.
. HUD brightness setting is not
too dim or too bright.
. HUD is adjusted to the proper
height.
. Polarized sunglasses are
not worn.
. Windshield and HUD lens are
clean.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (32,1)
5-32
Instruments and Controls
Vehicle Messages Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other. The messages that do not require immediate action can be acknowledged and cleared by pressing SEL. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem. The following are some of the vehicle messages that may be displayed depending on the vehicle content.
Battery Voltage and Charging Messages
BATTERY SAVER ACTIVE This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing features of the vehicle that may be noticed. At the point that features are disabled, this message displays. Turn off unnecessary accessories to allow the battery to recharge. LOW BATTERY This message is displayed when the battery voltage is low. See Battery on page 10-25. SERVICE BATTERY CHARGING SYSTEM This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.
TRANSPORT MODE ON This message is displayed when the vehicle is in transport mode. Some features can be disabled while in this mode, including Remote Keyless Entry (RKE), remote start, and the vehicle alarm system. Take the vehicle to your dealer for service to turn transport mode off.
Brake System Messages
BRAKE FLUID LOW This message is displayed when the brake fluid level is low. See Brake Fluid on page 10-23. STEP ON BRAKE TO RELEASE PARK BRAKE This message is displayed if you attempt to release the Electric Parking Brake without the brake pedal applied. See Parking Brake (Electric) on page 9-30 or Parking Brake (Manual) on page 9-32.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (33,1)
Instruments and Controls
5-33
RELEASE PARKING BRAKE This message is displayed if the Electric Parking Brake is on while the vehicle is in motion. See Parking Brake (Electric) on page 9-30 or Parking Brake (Manual) on page 9-32. SERVICE BRAKE ASSIST This message may be displayed when there is a problem with the brake boost assist system. When this message is displayed, the brake boost assist motor might be heard operating and you might notice pulsation in the brake pedal. This is normal under these conditions. Take the vehicle to your dealer for service. SERVICE PARKING BRAKE This message is displayed when there is a problem with the parking brake. Take the vehicle to your dealer for service.
Compass Messages Dashes may be displayed if the vehicle temporarily loses communication with the Global Positioning System (GPS).
Cruise Control Messages
ADAPTIVE CRUISE SET TO XXX This message displays when the Adaptive Cruise Control (ACC) speed is set. See Adaptive Cruise Control on page 9-40. ADAPTIVE CRUISE TEMPORARILY UNAVAILABLE This message displays when attempting to activate Adaptive Cruise Control (ACC) when it is temporarily unavailable. The ACC system does not need service.
This can occur under the following conditions:
The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle. For cleaning instructions, see Exterior Care on page 10-77.
. Heavy rain or snow is interfering with the radar object detection or camera performance. CRUISE SET TO XXX This message displays when the cruise control speed is set. See Cruise Control on page 9-37. NO CRUISE BRAKING GAS PEDAL APPLIED This message displays when Adaptive Cruise Control (ACC) is active and the driver is pressing the gas pedal. When this occurs, ACC will not brake. See Adaptive Cruise Control on page 9-40.
Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13
(GMNA-Localizing-U.S./Canada/Mexico-
Black plate (34,1)
5-34
Instruments and Controls
SERVICE ADAPTIVE CRUISE CONTROL This message displays when the Adaptive Cruise Control (ACC) needs service. Take the vehicle to your dealer.
