Download PDF Manual

SHIFT TO PARK BEFORE EXITING This message may display if Adaptive Cruise Control (ACC) is engaged holding the vehicle at a stop, and the driver attempts to exit the vehicle. Put the vehicle in P (Park) before exiting.


Door Ajar Messages


DOOR OPEN A door open symbol will be displayed on the DIC showing which door is open. If the vehicle has been shifted out of P (Park), a DOOR OPEN message will also be displayed. The DOOR OPEN


message may also be displayed if the vehicle starts to move. Close the door completely. HOOD OPEN This message will display along with a hood open symbol when the hood is open. Close the hood completely. TRUNK OPEN This message will display along with a symbol when the trunk is open. Close the trunk completely.


Engine Cooling System Messages


A/C OFF ENGINE COOLANT HOT This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air


conditioning compressor turns back on. The vehicle can continue to be driven. If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine. ENGINE OVERHEATED — IDLE ENGINE This message displays and a chime sounds when the engine coolant temperature is too hot. The engine coolant temperature warning light will also be on. Stop and allow the vehicle to idle until it cools down. ENGINE OVERHEATED — TURN VEHICLE OFF This message displays and a continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. The engine coolant temperature warning light will flash. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (35,1)


Instruments and Controls


5-35


damage. This message clears when the engine has cooled to a safe operating temperature.


Engine Oil Messages


CHANGE ENGINE OIL SOON This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the oil life system. See Engine Oil Life System on page 10-12, Driver Information Center (DIC) on page 5-25, Engine Oil on page 10-10, and Maintenance Schedule on page 11-3. ENGINE OIL HOT, IDLE ENGINE This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down. ENGINE OIL LOW — ADD OIL On some vehicles, this message displays when the engine oil level may be too low. Check the oil level


before filling to the recommended level. If the oil is not low and this message remains on, take the vehicle to your dealer for service. See Engine Oil on page 10-10. OIL PRESSURE LOW — STOP ENGINE This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer.


Engine Power Messages


ENGINE POWER IS REDUCED This message displays when the vehicle's engine power is reduced. Reduced engine power can affect the vehicle's ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the


next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your dealer for service as soon as possible.


Fuel System Messages


FUEL LEVEL LOW This message displays when the vehicle is low on fuel. Refuel as soon as possible TIGHTEN GAS CAP This message displays when the fuel cap is not on tight. Tighten the fuel cap.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (36,1)


5-36


Instruments and Controls


Key and Lock Messages


NO REMOTE DETECTED when the transmitter battery may be weak. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation on page 2-3. NO REMOTE KEY WAS DETECTED PLACE KEY IN TRANSMITTER POCKET THEN START YOUR VEHICLE This message displays when trying to start the vehicle if an RKE transmitter is not detected. The transmitter battery may be weak. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation on page 2-3. NO REMOTE PRESS BRAKE TO RESTART This message is displayed when attempting to turn off the vehicle and the remote is no longer detected. Restarting is allowed


without the remote for five minutes. Press the brake pedal to restart the vehicle. NUMBER OF KEYS PROGRAMMED This message displays when programming new keys to the vehicle. REMOTE LEFT IN VEHICLE This message displays when leaving the vehicle with the RKE transmitter still inside. REPLACE BATTERY IN REMOTE KEY This message displays when the battery in the RKE transmitter needs to be replaced.


Lamp Messages


AFL (ADAPTIVE FORWARD LIGHTING) LAMPS NEED SERVICE This message displays when the AFL system is disabled and needs service. See your dealer. See Adaptive Forward Lighting (AFL) on page 6-5. AUTOMATIC LIGHT CONTROL ON/OFF This message is displayed when the exterior lamp control is in AUTO and the lights have turned on or off. See Automatic Headlamp System on page 6-4. XXX TURN INDICATOR FAILURE When one of the turn signals is out, this message displays to show which bulb needs to be replaced. See Bulb Replacement on page 10-29 and Replacement Bulbs on page 10-31.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (37,1)


TURN SIGNAL ON This message is displayed if the turn signal has been left on. Turn off the turn signal.


Object Detection System Messages


24 GHz RADARS OFF This message displays when driving in certain areas where there may be radar interference. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), and the Active Emergency Braking System may not work or may not work as well. The vehicle does not need service. AUTOMATIC COLLISION PREP UNAVAILABLE This message displays when the Active Emergency Braking System has been unavailable for some time. The Active Emergency Braking System does not need service.


Instruments and Controls


5-37


This can occur under the following conditions:


The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle. For cleaning instructions, see Exterior Care on page 10-77.


. Heavy rain or snow is interfering with the radar object detection or camera performance.


This message may also be displayed if there is a problem with the StabiliTrak system. FORWARD COLLISION ALERT OFF This message displays when the Forward Collision Alert has been turned off. FRONT CAMERA BLOCKED CLEAN WINDSHIELD This message displays when the camera is blocked. Cleaning the outside of the windshield behind the


rearview mirror may correct the issue. The Lane Departure Warning system will not operate. Forward Collision Alert (FCA) may not work or may not work as well. LANE DEPARTURE WARNING UNAVAILABLE This message displays when attempting to activate the Lane Departure Warning (LDW) system when it is temporarily unavailable. The LDW system does not need service. This message could be due to the camera being blocked. Cleaning the outside of the windshield behind the rearview mirror may correct the issue. PARK ASSIST OFF This message displays when the Parking Assist system has been turned off or when there is a temporary condition causing the system to be disabled.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (38,1)


5-38


Instruments and Controls


REAR AUTO BRAKE AND PARK ASSIST UNAVAILABLE This message displays when attempting to activate the parking and backing features of the Driver Assistance System when they are temporarily unavailable. The system does not need service. This can occur under the following conditions:


The radar is not clean. Keep the radar sensors free of mud, dirt, snow, ice, and slush. Clean the entire front and/or rear of the vehicle. For cleaning instructions, see Exterior Care on page 10-77.


. Heavy rain or snow is interfering with the radar object detection or camera performance.


See Driver Assistance Systems on page 9-48.


SERVICE AUTOMATIC COLLISION PREP If this message displays, take the vehicle to your dealer to repair the system. SERVICE DRIVER ASSIST SYSTEM If this message displays, take the vehicle to your dealer to repair the system. Adaptive Cruise Control (ACC), Forward Collision Alert (FCA), Active Emergency Braking System, Assistance Systems for Parking or Backing, and/or Lane Departure Warning (LDW) system may not work. Do not use these systems until the vehicle has been repaired. SERVICE FRONT CAMERA If this message remains on after continued driving, the vehicle needs service. Do not use the Lane Departure Warning (LDW) and


Forward Collision Alert (FCA) features. Take the vehicle to your dealer. SERVICE PARK ASSIST This message displays if there is a problem with the Parking Assist system. Do not use this system to help you park. See your dealer for service. SERVICE REAR AUTO BRAKE AND PARK ASSIST This message displays if there is a problem with the parking and backing features of the Driver Assistance System. Do not use this system to help park or back the vehicle. See your dealer for service. SIDE BLIND ZONE ALERT OFF This message indicates that the driver has turned the Side Blind Zone Alert (SBZA) system off.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (39,1)


Instruments and Controls


5-39


SERVICE SIDE DETECTION SYSTEM If this message remains on after continued driving, the vehicle needs service. Side Blind Zone Alert (SBZA) and Rear Cross Traffic Alert (RCTA) features will not work. Take the vehicle to your dealer. SIDE DETECTION SYSTEM UNAVAILABLE This message indicates that Side Blind Zone Alert (SBZA) and Rear Cross Traffic Alert (RCTA) are disabled either because the sensor is blocked and cannot detect vehicles in the blind zone, or the vehicle is passing through an open area, such as the desert, where there is insufficient data for operation. This message may also activate during heavy rain or due to road spray. The vehicle does not need service. For cleaning, see "Washing the Vehicle" under Exterior Care on page 10-77.


Ride Control System Messages


ALL WHEEL DRIVE OFF If the vehicle has the All-Wheel-Drive (AWD) system, this message displays when there is a temporary condition making the AWD system unavailable. The vehicle will run in 2WD. This could be caused by:


Loss of wheel or vehicle speed


. AWD system overheat . Certain vehicle electrical


conditions


This message turns off when the above conditions are no longer present and the warning message is reset. See All-Wheel Drive on page 9-29.


SERVICE ALL WHEEL DRIVE This message displays if a problem occurs with the All-Wheel-Drive (AWD) system. The vehicle will run in 2WD. This could be caused by: . An electronics problem . Worn out or overheated clutch


plates


. Various electrical issues The system may need service. See your dealer. SERVICE STABILITRAK This message displays if there is a problem with the StabiliTrak system. See Traction Control/Electronic Stability Control on page 9-33. SERVICE SUSPENSION SYSTEM This message displays when there is a problem with the MagneRide™ system. See Driver Mode Control on page 9-35. Have the vehicle serviced by your dealer.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (40,1)


5-40


Instruments and Controls


SERVICE TRACTION CONTROL This message displays when there is a problem with the Traction Control System (TCS). See Traction Control/Electronic Stability Control on page 9-33. TRACTION CONTROL OFF This message may display when the Traction Control System (TCS) has been turned off. See Traction Control/Electronic Stability Control on page 9-33. TRACTION CONTROL ON This message may display when the Traction Control System (TCS) has been turned on. See Traction Control/Electronic Stability Control on page 9-33.


SERVICE STEERING COLUMN LOCK This message displays if there is a problem with the steering column lock. Take the vehicle to your dealer for service. SERVICE VEHICLE SOON This message displays if there is a problem with the vehicle. Take the vehicle to your dealer for service.


Starting the Vehicle Messages


PRESS BRAKE TO START VEHICLE This message is displayed when attempting to start the vehicle without first pressing the brake pedal.


Airbag System Messages


SERVICE AIRBAG This message displays if there is a problem with the airbag system. Take the vehicle to your dealer for service.


Security Messages


THEFT ATTEMPTED This message displays if the vehicle detects a tamper condition.


Service Vehicle Messages


SERVICE AC SYSTEM This message displays if there is a problem with the air conditioning system. Take the vehicle to your dealer for service. SERVICE POWER STEERING This message displays if there is a problem with the power steering system. Take the vehicle to your dealer for service.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (41,1)


SERVICE KEYLESS START SYSTEM This message is displayed if there is a problem with the pushbutton start system. Take the vehicle to your dealer for service. TURN STEERING WHEEL START VEHICLE AGAIN This message may display when you try to start the vehicle, but the column remains locked. Try turning the steering wheel while starting the vehicle to unlock the steering column. If the vehicle still does not start, turn the steering wheel the other way, and try starting the vehicle again.


Instruments and Controls


5-41


Tire Messages


SERVICE TIRE MONITOR SYSTEM This message displays if there is a problem with the Tire Pressure Monitor System (TPMS). See Tire Pressure Monitor Operation on page 10-50. TIRE LEARNING ACTIVE This message displays when the system is learning new tires. See Tire Pressure Monitor Operation on page 10-50. TIRE LOW ADD AIR TO TIRE This message displays when the pressure in one or more of the tires is low. This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate the location of the low tire. The low tire pressure warning light will also come on. See Tire Pressure Light on page 5-22.


If a tire pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires on page 10-40, Vehicle Load Limits on page 9-11, and Tire Pressure on page 10-47. You can receive more than one tire pressure message at a time. The DIC also shows the tire pressure values. See Driver Information Center (DIC) on page 5-25.


Transmission Messages


SERVICE TRANSMISSION This message displays if there is a problem with the transmission. See your dealer. SHIFT DENIED This message displays when using the Driver Shift Control (DSC) and attempting to shift to a gear not appropriate for the vehicle speed


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (42,1)


Washer Fluid Messages


WASHER FLUID LOW ADD FLUID This message may display when the washer fluid level is low. See Washer Fluid on page 10-22.


5-42


Instruments and Controls


and engine revolutions per minute (rpm). See Manual Mode on page 9-26. SHIFT TO PARK This message displays when the transmission needs to be shifted to P (Park). This may appear when turning the ignition off if the vehicle is not in P (Park). TRANSMISSION HOT — IDLE ENGINE This message displays and a chime sounds if the transmission fluid in the vehicle gets hot. Driving with the transmission fluid temperature high can cause damage to the vehicle. Stop the vehicle and let it idle to allow the transmission to cool. This message clears when the fluid temperature reaches a safe level.


Vehicle Reminder Messages


ICE POSSIBLE DRIVE WITH CARE This message displays when ice conditions are possible.


Vehicle Speed Messages


SELECTED SPEED LIMIT EXCEEDED This message is displayed when the vehicle speed is greater than the set speed. See "Speed Warning" under Driver Information Center (DIC) on page 5-25. VEHICLE SPEED LIMITED This message is displayed under certain conditions when there is a problem and the vehicle’s speed is being limited.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (43,1)


Vehicle Personalization Use the audio system controls to access the personalization menus for customizing vehicle features. The following are all possible personalization features. Depending on the vehicle, some may not be available.


Base Radio Audio System Controls MENU: Press the center of the knob to enter the menus and select menu items. Turn the knob to scroll through the menus. S BACK: Press to exit or move backward in a menu. To access the personalization menu: 1. On the Home page, turn the


MENU knob to highlight Settings and press the MENU knob.


Instruments and Controls


5-43


2. Turn the MENU knob to highlight


the desired feature and press the MENU knob.


CUE Infotainment System Audio System Controls To access the personalization menu: 1. Press SETTINGS on the Home


page on the infotainment system display.


2. Press the desired feature to


display a list of available options.


3. Press to select the desired


feature setting.


4. Press the [ Back screen button to return to the previous menu.


Personalization Menus The following list of menu items may be available:


Time and Date Language [Language]


. Valet Mode


. Radio . Vehicle . Bluetooth . Voice . Display . Rear Camera . Return to Factory Settings . Software Information Each menu is detailed in the following information. Time and Date Manually set the time and date. See Clock (Base Radio) on page 5-6 or Clock (Uplevel Radio) on page 5-6. Language [Language] Select Language, then select from the available language(s). Select the language. The selected language will display on the system, and voice recognition will reflect the selected language.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (44,1)


5-44


Instruments and Controls


Valet Mode This will lock the infotainment system, the infotainment controls, and screen storage location. To turn Valet Mode on and off, enter a four-digit code on the keypad. Press Enter to go to the confirmation screen. Re-enter the four-digit code. Press LOCK to lock the system. Enter the four-digit code to unlock the system. Press the Back screen button to go back to the previous menu. Radio Press to display the Radio Menu and the following may display: . Manage Favorites . Number of Favorites Pages . Audible Touch Feedback . Auto Volume . Bose Audio Pilot . Maximum Start Up Volume . Audio Cue Volume


Manage Favorites This allows favorites to be edited. Select a displayed Favorite to select that favorite to edit. Select Rename to rename the favorite or Delete to delete it.


Number of Favorites Pages Select to set the number of favorites to display. Select the desired number or select Auto and the infotainment system will automatically adjust the number of favorite shown.


Audible Touch Feedback This allows Audible Touch Feedback to be turned on or off. Select Off or On.


Auto Volume If equipped, this feature adjusts the volume based on the vehicle speed.


Bose Audio Pilot This feature adjusts the volume based on the noise in the vehicle. See “Bose AudioPilot Noise Compensation Technology” under “Infotainment System Settings” in the infotainment manual.


Maximum Startup Volume This feature sets the maximum startup volume. If the vehicle is started and the volume is greater than this level, the volume is adjusted to this level. To set the maximum startup volume, select + or − to increase or decrease.


Audio Cue Volume If equipped, this feature adjusts the startup and shutdown sounds. To adjust the volume, select + or − to increase or decrease. Vehicle Select and the following may display: . Climate and Air Quality


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (45,1)


Instruments and Controls


5-45


. Collision/Detection Systems . Comfort and Convenience


Lighting


. Power Door Locks . Remote Lock, Unlock, Start . Return to Factory Settings


Climate and Air Quality Select and the following may display: . Auto Fan Max Speed . Auto Defog


Auto Fan Max Speed This feature will set the maximum auto fan speed. Select Low, Medium, or High.


Auto Defog When set to On, the front defog will automatically react to temperature and humidity conditions that may cause fogging. Only vehicles with the dual automatic climate control will have this option.


Select Off or On.


Collision/Detection Systems Select the Collision/Detection Systems menu and the following may display: . Alert Type . Auto Collision Preparation . Rear Cross Traffic Alert . Go Notifier . Side Blind Zone Alert


Alert Type This feature will set crash alerts to beeps or seat vibrations. This setting affects all crash alerts including:


Forward Collision Lane Departure Warning . Adaptive Cruise Control . Parking Assist . Backing Warning Select Beeps or Safety Alert Seat.


Auto Collision Preparation This feature will turn on or off the Forward Collision Alert feature as well as the Automatic Braking capability of the Auto Collision Preparation feature. With the Alert & Brake setting, both Forward Collision Alert as well as the Automatic Braking capability of the Auto Collision Preparation feature are available. The Alert setting disables most automatic braking functions of the Auto Collision Preparation feature. Some last-second automatic braking capability is still provided with the Alert setting, but it is much less likely to be triggered by most driving conditions. Off disables all Forward Collision Alert and Automatic Braking capabilities of the Auto Collision Preparation feature. See Active Emergency Braking System on page 9-56. Select Off, Alert & Brake, or Alert.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (46,1)


5-46


Instruments and Controls


Rear Cross Traffic Alert This allows the feature to be turned on or off. See Assistance Systems for Parking or Backing on page 9-49. Select Off or On.


Go Notifier This feature will give a reminder that Adaptive Cruise Control provides when it has brought the vehicle to a complete stop behind another stopping vehicle, and then that vehicle drives on. See Adaptive Cruise Control on page 9-40. Select Off or On.


Side Blind Zone Alert This allows the feature to be turned on or off. See Side Blind Zone Alert (SBZA) on page 9-58. Select Off or On.


Comfort and Convenience Select and the following may display: . Auto Memory Recall . Easy Exit Options . Chime Volume . Reverse Tilt Mirror . Rain Sense Wipers


Auto Memory Recall This allows the feature to be turned on or off. Select Off,On - Driver Door Open, or On - At Ignition On.


Easy Exit Options This allows the feature to be turned on or off. Select Off or On.


Chime Volume This allows the selection of the chime volume level. Press + or − to adjust the volume.


Reverse Tilt Mirror When on, both the driver and passenger, driver, or passenger mirrors will tilt downward when the vehicle is shifted to R (Reverse) to improve visibility of the ground near the rear wheels. They will return to their previous driving position when the vehicle is shifted out of R (Reverse) or the ignition is turned to OFF. Select Off, On - Driver and Passenger, On - Driver, or On - Passenger.


Rain Sense Wipers This allows the feature to be turned on or off. Select Disabled or Enabled.


Lighting Select and the following may display: . Vehicle Locator Lights . Exit Lighting . Auto High Beam


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (47,1)


Vehicle Locator Lights This feature will flash the exterior lamps when K on the Remote Keyless Entry (RKE) transmitter is pressed to locate the vehicle. Select Off or On.


Exit Lighting This allows the selection of how long the exterior lamps stay on when leaving the vehicle when it is dark outside. Select Off, 30 Seconds, 60 Seconds, or 120 Seconds.


Auto High Beam This allows the feature to be turned on or off. Select Off or On.


Power Door Locks Select and the following may display: . Unlocked Door Anti-Lockout . Auto Door Unlock


Instruments and Controls


5-47


. Delayed Door Lock


Unlocked Door Anti-Lockout When on, this feature will keep the driver door from locking when the door is open. If Off is selected, the Delayed Door Lock menu will be available. Select Off or On.


Auto Door Unlock This allows selection of which of the doors will automatically unlock when the vehicle is shifted into P (Park) with an automatic transmission or when the vehicle is turned off with a manual transmission. Select Off, All Doors, or Driver Door.


Delayed Door Lock When on, this feature will delay the locking of the doors. To override the delay, press the power door lock switch on the door. Select Off or On.


Remote Lock, Unlock, Start Select and the following may display: . Remote Unlock Light Feedback . Remote Lock Feedback . Remote Door Unlock . Remote Start Auto Heat Seats . Passive Door Unlock . Passive Door Lock . Remote Left in Vehicle Alert


Remote Unlock Light Feedback When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter. Select Off or Flash Lights.


Remote Lock Feedback This allows selection of what type of feedback is given when locking the vehicle with the RKE transmitter. Select Off, Lights and Horn, Lights Only, or Horn Only.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (48,1)


5-48


Instruments and Controls


Remote Door Unlock This allows selection of which doors will unlock when pressing K on the RKE transmitter. Select All Doors or Driver Door.


Remote Start Auto Heat Seats If equipped and turned on, this feature will turn the heated seats on when using remote start on cold days. Select Off or On.


Passive Door Unlock This allows the selection of what doors will unlock when using the button on the driver door to unlock the vehicle. Select All Doors or Driver Door.


Passive Door Lock This feature can be turned on or off, or can be used to select feedback when using the button on the driver door to lock the vehicle. See Remote Keyless Entry (RKE) System Operation on page 2-3.


Select Off, On with Horn Chirp, or On.


Remote Left in Vehicle Alert This feature sounds an alert when the RKE transmitter is left in the vehicle. Select Off or On. Bluetooth Select and the following may display: . Pair New Device . Device Management . Ringtones . Voice Mail Numbers


Pair New Device Select to pair a new device. See “Pairing” in “Infotainment Controls” under Bluetooth (Infotainment Controls) on page 7-21 or Bluetooth (Voice Recognition) on page 7-26 or Bluetooth (Overview) on page 7-20


or “Pairing” in “Infotainment Controls” under “Bluetooth” in the infotainment manual.


Device Management Select to connect to a different phone source, disconnect a phone, or delete a phone.


Ringtones Press to change the ring tone for the specific phone. The phone does not need to be connected to change the ring.


Voice Mail Numbers This feature displays the voice mail number for all connected phones. The voice mail number may be changed by selecting EDIT or pressing the EDIT button and typing in a new number, then select SAVE or press the SAVE button. Voice Select and the following may display: . Confidence Threshold


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (49,1)


. Prompt Length . Audio Feedback Speed


Confidence Threshold This feature allows the adjustment of the sensitivity of the speech recognition system. Select Confirm More or Confirm Less.


Prompt Length This feature adjusts the voice prompt length. Select Short or Long.


Audio Feedback Speed This feature adjusts the audio feedback speed. Select Slow, Medium, or Fast. Display Select and the following may display: . Mode . Proximity Sensing . Calibrate Touchscreen


Instruments and Controls


5-49


Turn Display Off


Mode Select to change the display screen for day or night driving. Select Auto, Day, or Night.


Proximity Sensing This allows the feature to be turned on or off. Select Off, On, or On-Map Only.


Calibrate Touchscreen Select to calibrate the touchscreen, then follow the prompts.


Turn Display Off Select to turn the display off. Press anywhere on the display area or any faceplate button to turn the display on. Rear Camera Select and the following may display: . Guidance Lines . Rear Park Assist Symbols


Guidance Lines Select to turn Off or On. See Assistance Systems for Parking or Backing on page 9-49.


Rear Park Assist Symbols Select to turn Off or On. See Assistance Systems for Parking or Backing on page 9-49. Return to Factory Settings Select and the following may display: . Restore Vehicle Settings . Clear All Private Data . Restore Radio Settings


Restore Vehicle Settings This allows selection of restoring vehicle settings. Select Cancel or Restore.


Clear All Private Data This allows selection to clear all private information from the vehicle. Select Cancel or Delete.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (50,1)


5-50


Instruments and Controls


Restore Radio Settings This allows selection to restore radio settings. Select Cancel or Restore. Software Information Select to view the infotainment system current software information.


Universal Remote System See Radio Frequency Statement on page 13-15.


Universal Remote System Programming


If equipped, these buttons are in the overhead console. This system can replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and


home automation devices. These instructions refer to a garage door opener, but can be used for other devices. Do not use the Universal Remote system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read these instructions completely before programming the Universal Remote system. It may help to have another person assist with the programming process. Keep the original hand-held transmitter for use in other vehicles as well as for future programming. Erase the programming when vehicle ownership is terminated. See “Erasing Universal Remote System Buttons” later in this section.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (51,1)


Instruments and Controls


5-51


To program a garage door opener, park outside directly in line with and facing the garage door opener receiver. Clear all people and objects near the garage door. Make sure the hand-held transmitter has a new battery for quick and accurate transmission of the radio-frequency signal. Programming the Universal Remote System For questions or help programming the Universal Remote system, call 1-800-355-3515 or see www.homelink.com. Programming involves time-sensitive actions, and may time out causing the procedure to be repeated. To program up to three devices: 1. Hold the end of the hand-held


transmitter about 3 to 8 cm (1 to 3 in) away from the Universal Remote system buttons with the indicator light in view. The


hand-held transmitter was supplied by the manufacturer of the garage door opener receiver.


2. At the same time, press and


hold both the hand-held transmitter button and one of the three Universal Remote system buttons to be used to operate the garage door. Do not release either button until the indicator light changes from a slow to a rapid flash. Then release both buttons. Some garage door openers may require substitution of Step 2
with the procedure under in “Radio Signals for Canada and Some Gate Operators” later in this section.


3. Press and hold the newly


programmed Universal Remote system button for five seconds while watching the indicator light and garage door activation.


If the indicator light stays on continuously or the garage door moves when the


button is pressed, then programming is complete. There is no need to complete Steps 4–6. If the indicator light does not come on or the garage door does not move, a second button press may be required. For a second time, press and hold the newly programmed button for five seconds. If the light stays on or the garage door moves, programming is complete. If the indicator light blinks rapidly for two seconds, then changes to a solid light and the garage door does not move, continue with programming Steps 4–6.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (52,1)


5-52


Instruments and Controls


enough for the Universal Remote system to pick up the signal during programming. If the programming did not work, replace Step 2 under “Programming the Universal Remote System” with the following: Press and hold the Universal Remote system button while pressing and releasing the hand-held transmitter button every two seconds until the signal has been successfully accepted by the Universal Remote system. The Universal Remote system indicator light will flash slowly at first and then rapidly. Proceed with Step 3 under “Programming the Universal Remote System” to complete.


does not flash, press and hold the same button a second time for two seconds, then release it. Again, if the door does not move or the garage door lamp does not flash, press and hold the same button a third time for two seconds, then release it.


The Universal Remote system should now activate the garage door. Repeat the process for programming the two remaining buttons. Radio Signals for Canada and Some Gate Operators For questions or programming help call 1-800-355-3515 or see www.homelink.com. Canadian radio-frequency laws and some U.S. gate operators require transmitter signals to time out or quit after several seconds of transmission. This may not be long


Learn or Smart Button 4. After completing Steps 1–3,


locate the Learn or Smart button inside the garage on the garage door opener receiver. The name and color of the button may vary by manufacturer.


5. Press and release the Learn or


6.


Smart button. Step 6 must be completed within 30 seconds of pressing this button. Inside the vehicle, press and hold the newly programmed Universal Remote system button for two seconds and then release it. If the garage door does not move or the lamp on the garage door opener receiver


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (53,1)


Instruments and Controls


5-53


Reprogramming a Single Universal Remote System Button To reprogram any of the system buttons: 1. Press and hold any one of the


buttons. Do not release the button.


2. The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 under “Programming the Universal Remote System.”


Universal Remote System Operation


Using the Universal Remote System Press and hold the appropriate Universal Remote system button for at least one-half second. The indicator light will come on while the signal is being transmitted. Erasing Universal Remote System Buttons Erase all programmed buttons when vehicle ownership is terminated. To erase: 1. Press and hold the two outside buttons until the indicator light begins to flash. This should take about 10 seconds.


2. Release both buttons.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (54,1)


5-54


Instruments and Controls


2 NOTES


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (1,1)


Lighting


Exterior Lighting


Exterior Lamp Controls . . . . . . . . 6-1
Exterior Lamps Off


Reminder . . . . . . . . . . . . . . . . . . . . 6-3


Headlamp High/Low-Beam


Changer . . . . . . . . . . . . . . . . . . . . . 6-3
Flash-to-Pass . . . . . . . . . . . . . . . . . 6-4
Daytime Running


Lamps (DRL) . . . . . . . . . . . . . . . . 6-4


Automatic Headlamp


System . . . . . . . . . . . . . . . . . . . . . . 6-4


Adaptive Forward


Lighting (AFL) . . . . . . . . . . . . . . . 6-5
Hazard Warning Flashers . . . . . 6-5
Turn and Lane-Change


Signals . . . . . . . . . . . . . . . . . . . . . . 6-6


Interior Lighting


Instrument Panel Illumination


Control . . . . . . . . . . . . . . . . . . . . . . 6-6
Courtesy Lamps . . . . . . . . . . . . . . 6-7
Dome Lamps . . . . . . . . . . . . . . . . . 6-7
Reading Lamps . . . . . . . . . . . . . . . 6-7


Lighting Features


Entry Lighting . . . . . . . . . . . . . . . . . 6-8
Exit Lighting . . . . . . . . . . . . . . . . . . . 6-8
Battery Power Protection . . . . . . 6-8
Exterior Lighting Battery


Saver . . . . . . . . . . . . . . . . . . . . . . . . 6-8


Lighting


6-1


Exterior Lighting


Exterior Lamp Controls


The exterior lamp control is on the turn signal lever. Turn the control to the following positions: O (Off): Turns off the exterior lamps. The knob returns to the AUTO position after it is released. Turn to O again to reactivate the AUTO mode. In Canada, the headlamps will automatically reactivate when the vehicle is shifted out of P (Park) on automatic transmission vehicles,


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (2,1)


6-2


Lighting


and when the parking brake is released on manual transmission vehicles. AUTO (Automatic): Automatically turns the exterior lamps on and off, depending on outside lighting. ; (Parking Lamps): Turns on the parking lamps including all lamps, except the headlamps. 2 (Headlamps): Turns on the headlamps together with the parking lamps and instrument panel lights. IntelliBeam® System If equipped, this system turns the vehicle's high-beam headlamps on and off according to surrounding traffic conditions. The system turns the high-beam headlamps on when it is dark enough and there is no other traffic present.


Keep this area of the windshield clear of debris to allow for best system performance. The high-beam headlamps remain on, under the automatic control, until one of the following situations occurs:


The system detects an approaching vehicle's headlamps. The system detects a preceding vehicle's taillamps. The outside light is bright enough that high-beam headlamps are not required. The vehicle's speed drops below 20 km/h (12 mph). The turn signal lever is moved forward to the high-beam position or the Flash-to-Pass feature is used. See Headlamp High/Low-Beam Changer on page 6-3 and Flash-to-Pass on page 6-4.


This light comes on in the instrument cluster when the IntelliBeam system is enabled.


Turning On and Enabling IntelliBeam To enable the automatic high-beam system, with the turn signal lever in the neutral position, turn the exterior lamp control to AUTO. The blue high-beam on light appears on the instrument cluster when the high beams are on.


Driving with IntelliBeam The system only activates the high beams when driving over 40 km/h (25 mph). There is a sensor near the top center of the windshield, which automatically controls the system.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (3,1)


The IntelliBeam system can be disabled by the High/Low-Beam Changer or the Flash-to-Pass feature. If this happens, the High/Low-Beam Changer must be activated two times within five seconds to reactivate the IntelliBeam system. The instrument cluster light will come on to indicate the IntelliBeam is reactivated.


The high beams may not turn off automatically if the system cannot detect other vehicle's lamps because of any of the following:


The other vehicle's lamp(s) are missing, damaged, obstructed from view, or otherwise undetected. The other vehicle's lamp(s) are covered with dirt, snow, and/or road spray. The other vehicle's lamp(s) cannot be detected due to dense exhaust, smoke, fog, snow, road spray, mist, or other airborne obstructions.


. Your vehicle's windshield is dirty,


cracked, or obstructed by something that blocks the view of the light sensor.


. Your vehicle's windshield is covered with ice, dirt, haze, or other obstructions.


. Your vehicle is loaded such that


the front end points upward, causing the light sensor to aim high and not detect headlamps and taillamps.


. You are driving on winding or


hilly roads.


You may need to manually disable or cancel the high-beam headlamps by turning the low-beam headlamps on, if any of the above conditions exist. This feature can be turned on or off or the sensitivity can be changed in vehicle personalization. See Vehicle Personalization on page 5-43.


Lighting


6-3


Exterior Lamps Off Reminder A warning chime will sound if the exterior lamp control is left on in either the headlamp or parking lamp position and the driver door is opened with the ignition off.


Headlamp High/ Low-Beam Changer 2 3 (Headlamp High/Low-Beam Changer): Push the turn signal lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release.


This indicator light turns on in the instrument cluster when the high-beam headlamps are on.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (4,1)


6-4


Lighting


Flash-to-Pass This feature allows the high-beam headlamps to be used to signal the driver in front of you that you want to pass. Pull and hold the turn signal lever toward you to use this feature. When this is done the following will occur:


If the headlamps are off or in low-beam mode, the high-beam headlamps will turn on. They will stay on as long as the lever is held there. Release the lever to turn them off. If the headlamps are in high-beam mode, they will go to low beam.


Daytime Running Lamps (DRL) DRL can make it easier for others to see the front of your vehicle during the day. Fully functional DRL are required on all vehicles first sold in Canada.


The DRL system turns on the low-beam headlamps at a reduced brightness. For vehicles with High Intensity Discharge (HID) headlamps, there is a dedicated DRL. The DRL will come on when all of the following conditions are met:


Automatic Headlamp System When the exterior lamp control is set to AUTO and it is dark enough outside, the headlamps come on automatically.


The ignition is on. The exterior lamp control is in AUTO. The light sensor determines it is daytime. The parking brake is released or the vehicle is not in P (Park). The taillamps, sidemarker lamps, instrument panel lights, and other lamps will not be on. The DRL turn off when the headlamps are turned to O or the ignition is off.


There is a light sensor on top of the instrument panel. Do not cover the sensor, otherwise the headlamps will come on when they are not needed.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (5,1)


Adaptive Forward Lighting (AFL) On vehicles with the AFL system, the headlamps pivot horizontally to provide greater road illumination while turning. To enable AFL, set the exterior lamp control on the turn signal lever to the AUTO position. Moving the control out of the AUTO position will deactivate the system. AFL will operate when the vehicle speed is greater than 3 km/h (2 mph). AFL will not operate when the transmission is in R (Reverse). AFL is not immediately operable after starting the vehicle; driving a short distance is required to calibrate the AFL. See Exterior Lamp Controls on page 6-1.


The system may also turn on the headlamps when driving through a parking garage or tunnel. When it is bright enough outside, the headlamps will turn off or may change to Daytime Running Lamps (DRL). The automatic headlamp system turns off when the exterior lamp control is turned to O or the ignition is off. Lights On with Wipers If the windshield wipers are activated in daylight with the engine on, and the exterior lamp control is in AUTO, the headlamps, parking lamps, and other exterior lamps come on. The transition time for the lamps coming on varies based on wiper speed. When the wipers are not operating, these lamps turn off. Move the exterior lamp control to P or ; to disable this feature.


Lighting


6-5


Hazard Warning Flashers


| (Hazard Warning Flashers): Press this button on the center stack to make the front and rear turn signal lamps flash on and off. Press again to turn the flashers off. The hazard warning flashers turn on automatically if the airbags deploy.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (6,1)


6-6


Lighting


Turn and Lane-Change Signals


Move the lever all the way up or down to signal a turn. An arrow on the instrument cluster flashes in the direction of the turn or lane change. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is completed. If the lever is briefly pressed and released, the turn signal flashes three times.


Interior Lighting


Instrument Panel Illumination Control


The turn and lane-change signal can be turned off manually by moving the lever back to its original position. If after signaling a turn or lane change, the arrow flashes rapidly or does not come on, a signal bulb might be burned out. Replace any burned out bulbs. If a bulb is not burned out, check the fuse. See Fuses and Circuit Breakers on page 10-32.


The brightness of the instrument panel lighting and steering wheel controls can be adjusted. D (Instrument Panel Illumination): Move the thumbwheel up or down to brighten or dim the lights. The brightness of the displays automatically adjusts based on outdoor lighting. The instrument


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (7,1)


Lighting


6-7


To change the dome lamp settings, press: OFF: Turns the lamp off, even when a door is open. DOOR: The lamp comes on when a door is opened. ON: Turns the lamp on.


Reading Lamps There are reading lamps on the overhead console and over the rear passenger doors. These lamps come on when any door is opened. To manually turn the reading lamps on or off:


panel illumination control will set the lowest level to which the displays will automatically be adjusted.


Courtesy Lamps The courtesy lamps come on when any door is opened and the dome lamp is in the DOOR position.


Dome Lamps The dome lamp is in the overhead console.


Press m or n next to each overhead console reading lamp. Press the lamp lens to turn the rear passenger reading lamps on or off.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (8,1)


6-8


Lighting


Lighting Features


Entry Lighting The headlamps, taillamps, backup lamps, license plate lamps, outside mirror lamps, exterior door handle lamps, dome lamps, and most of the interior lights turn on briefly at night or in areas of limited lighting when K is pressed on the Remote Keyless Entry (RKE) transmitter. See Remote Keyless Entry (RKE) System Operation on page 2-3. When the driver door is opened, all control lights, Driver Information Center (DIC) lights, and door pocket lights turn on. After about 30 seconds the exterior lamps turn off, then the dome lamps and remaining interior lights dim to off. Entry lighting can be disabled manually by changing the ignition out of the OFF position, or by pressing Q on the RKE transmitter.


This feature can be changed. See “Vehicle Locator Lights” under Vehicle Personalization on page 5-43.


Exit Lighting The headlamps, taillamps, parking lamps, outside mirror lamps, license plate lamps, and exterior door handle lamps come on at night, or in areas with limited lighting, when the driver door is opened after the ignition is turned off. The dome lamp comes on after the ignition is changed to the OFF position. The exterior lamps and dome lamp remain on for a set amount of time, then automatically turn off. The exterior lamps turn off immediately by turning the exterior lamp control off. This feature can be changed. See Vehicle Personalization on page 5-43.


Battery Power Protection The battery saver feature is designed to protect the vehicle's battery. If some interior lamps are left on and the ignition is turned off, the battery rundown protection system automatically turns the lamp off after some time.


Exterior Lighting Battery Saver The exterior lamps turn off about 10 minutes after the ignition is turned off, if the parking lamps or headlamps have been manually left on. This protects against draining the battery. To restart the 10-minute timer, turn the exterior lamp control to the off position and then back to the parking lamp or headlamp position. To keep the lamps on for more than 10 minutes, the ignition must be in the ACC/ACCESSORY or ON/RUN/ START position.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (1,1)


Phone


Bluetooth (Overview) . . . . . . . . 7-20
Bluetooth (Infotainment


Controls) . . . . . . . . . . . . . . . . . . . 7-21


Bluetooth (Voice


Recognition) . . . . . . . . . . . . . . . 7-26


Trademarks and License Agreements


Trademarks and License


Agreements . . . . . . . . . . . . . . . . 7-31


Infotainment System


Introduction


Infotainment . . . . . . . . . . . . . . . . . . . 7-1
Theft-Deterrent Feature . . . . . . . 7-2
Overview . . . . . . . . . . . . . . . . . . . . . . 7-3
Home Page . . . . . . . . . . . . . . . . . . . 7-4
Software Updates . . . . . . . . . . . . . 7-7


Radio


AM-FM Radio . . . . . . . . . . . . . . . . . 7-8
Satellite Radio . . . . . . . . . . . . . . . 7-10
Radio Reception . . . . . . . . . . . . . 7-11
Backglass Antenna . . . . . . . . . . 7-12
Multi-Band Antenna . . . . . . . . . . 7-12


Audio Players


CD Player . . . . . . . . . . . . . . . . . . . 7-12
USB Port . . . . . . . . . . . . . . . . . . . . 7-15
SD Card Reader . . . . . . . . . . . . . 7-18
Auxiliary Jack . . . . . . . . . . . . . . . . 7-19


Infotainment System 7-1


Introduction


Infotainment Read the following pages to become familiar with the infotainment system featured in this owner manual.


{ Warning


Taking your eyes off the road for too long or too often while using any infotainment features can cause a crash resulting in injury or death. Do not give extended attention to infotainment tasks while driving. Focus your attention on driving and limit glances to the instrument cluster or center stack screens. Use voice guidance whenever possible.


The infotainment system has built-in features intended to help with this by disabling some functions when driving. A grayed-out function is not


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (2,1)


7-2


Infotainment System


available when the vehicle is moving. All functions are available when the vehicle is parked. Before driving: . Become familiar with the


infotainment system operation and buttons on the faceplate. . Set up the audio by presetting


favorite stations, setting the tone, and adjusting the speakers.


. Set up phone numbers in


advance so they can be called easily by pressing a single button or by using a single voice command for vehicles equipped with phone capability.


See Defensive Driving on page 9-3. This vehicle’s infotainment system may be equipped with a noise reduction system, which can work improperly if the audio amplifier, engine calibrations, exhaust system, microphones, radio, or speakers are


modified or replaced. This could result in more noticeable engine noise at certain speeds. The vehicle has Retained Accessory Power (RAP). With RAP, the audio system can be played even after the ignition is turned off. See Retained Accessory Power (RAP) on page 9-21. The base radio is included in this manual. See the CUE infotainment manual for information on the CUE radio, audio players, phone, navigation system, and voice or speech recognition. There is also information on settings and downloadable applications (if equipped).


Theft-Deterrent Feature TheftLock® is designed to discourage theft of the vehicle's radio by learning a portion of the Vehicle Identification Number (VIN). The radio does not operate if it is stolen or moved to a different vehicle.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (3,1)


Overview


Infotainment System Overview The infotainment system is controlled by using the buttons on the faceplate and steering wheel controls.


Infotainment System 7-3


1. FAV (Favorite Pages)


Press to scroll through the favorite pages for each source.


2. O (Power/Volume)


Press to turn the audio on or off. Press and hold to clear the screen and display the time. Press to mute the system. Press again to unmute. Turn the knob to adjust the volume.


3. 7 (Seek Previous/Fast


Reverse)


Press to seek to the beginning of the current or previous track. If the track has been playing for less than five seconds, it seeks the previous track. If longer than five seconds, the current track starts from the beginning.


Cadillac ATS Owner Manual 6014430) - 2014 - 2nd Edition - 8/23/13


(GMNA-Localizing-U.S./Canada/Mexico-


Black plate (4,1)


7-4


Infotainment System


Press and hold to quickly reverse through a track. Release the button to return to playing speed. See CD

Loading...
x