Login- Download PDF Manual
-
4. Select "Delete data" and press the control-
ler.
5. Select "Delete address book" and press the
controller.
6. Select "Yes" and press the controller.
Storing home address You can save your current position or the cur- rent destination as the home address in the address book. This entry occupies the second position in the address book. Control Center, for principle details, refer to page 16. 1. Select "Address book" and press the con-
troller.
2. Select "Home address" and press the con-
troller.
Select "Use current location as address" or, during destination guidance, "Save current destination".
3. Press the controller. In order to accept the home address as the des- tination: Select "Start guidance" and press the control- ler.
122
To change the entry: Select "Edit address" and press the controller. For operation, refer to Entering a destination manually, page 115
Route selection You can influence the calculated route by choosing certain route criteria.
Changing route criteria Control Center, for principle details, refer to page 16. 1. Select "Navigation" and press the control-
ler.
2. Select "Route preference" and press the
controller.
The various criteria are listed on the Control Display.
3. Select a route criterion for the route:
> "With highways"
Freeways and major traffic arteries are given priority
> "Avoid highways"
Freeways are avoided where possible
> "Fast route"
Shortest time using combination of smallest possible distance and sections where fast driving is possible
> "Short route"
Shortest distance without consideration of the time
Word matching principle The system supports the word matching princi- ple to make it easier for you to enter the names of streets or towns. The system runs ongoing checks, comparing your destination entries with the data stored on the navigation DVD as the basis for instant response. The user bene- fits include: > Names of specific locations can also vary from the official versions if you are using a spelling that is customary in another coun- try. Example: Instead of "München", you can also enter the English spelling "Munich" or the Italian spelling "Monaco".
> When you are entering the names of towns and streets the system will complete them automatically as soon as enough letters are available to ensure unambiguous identifica- tion.
> The system only accepts name entries
beginning with letters that are stored on the navigation DVD. The system will not accept nonexistent names and addresses.
4. Press the controller.
The route criterion is highlighted.
5.
If necessary, select an additional route cri- terion and then press the controller: > "Dynamic route"
Automatic changing of the route in response to traffic obstruction. Depend- ing on the type of road and the nature and length of the traffic obstruction, the route can also be calculated so that you travel through the traffic obstruction.
> "Avoid tollroads"
Tollroads are avoided where possible
> "Avoid ferries"
Ferries are avoided where possible
To exit from the menu:
Select the arrow and press the controller. The route is planned according to fixed rules. The type of road is taken into account, e.g. whether it is a highway or a winding road. The road types are stored on the navigation DVD. As a result, the routes recommended by the navigation system may not always be the same ones that you would choose based on personal experience. You can change the choice of route as often as you like while entering the destination and whenever the destination guidance is active.
123
1 Predicted time of arrival 2 Distance to the destination on the calcu-
lated route
3 Route criterion 4 Voice instructions switched on/off During destination guidance, you can operate other equipment using the Control Center at any time. You will be punctually notified of a change of direction by spoken instructions and the display of the direction arrow. To exit from the menu:
Select the arrow and press the controller.
Destination guidance
Starting destination guidance Control Center, for principle details, refer to page 16. 1. Select "Navigation" and press the control-
ler.
2. Select the destination from the destination list and press the controller or enter a new destination, refer to page 115.
3. Select "Start guidance" and press the con-
troller.
The destination guidance is started. This symbol indicates the current destina-
tion. After the route has been calculated, destination guidance is indicated by arrows or a route map on the Control Display.
124
Terminating/continuing destination guidance Control Center, for principle details, refer to page 16.
This symbol indicates the current destina-
tion. 1. Select the current destination and press the
controller.
Control Center, for principle details, refer to page 16. 1. Select "Navigation" and press the control-
ler.
2. Select "Current position" and press the
controller.
The current position of your BMW is displayed.
2. Select "Start guidance" and press the con-
troller.
The destination guidance is switched off.
When you park the vehicle before reaching the entered destination, upon restarting you will see the question "Continue guidance to desti- nation?". The destination guidance starts automatically after a short time. To start the destination guidance: Select "Yes" and press the controller.
Displaying current position You can have your current position displayed even when the destination guidance is switched off.
If the navigation system is unable to identify a town or city, your current map coordinates will appear. To exit from the menu:
Select the arrow and press the controller.
You can also have the current position dis- played on a map, refer to page 126.
Destination guidance through voice instructions
Switching voice instructions on/off Control Center, for principle details, refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Display settings" and press the
controller.
125
4. Select "Languages" and press the control-
ler.
Adjusting volume 1. Repeat the last voice instruction, if neces-
sary.
2. Turn the button during the voice instruction
to select the desired volume.
5. Select "Navigation voice instructions on"
and press the controller.
The voice instructions are switched on.
The setting is stored for the remote control cur- rently in use.
Repeat voice instructions and cancel With the programmable buttons on the steering wheel, you can also execute the following func- tions, refer to page 46: > Repeat the voice instruction:
Press button.
> Switch voice instructions on/off:
Hold the button down.
126
This volume is independent of the volume of the audio and video sources. The setting is stored for the remote control cur- rently in use.
Route display You have the option of displaying various views of the route during destination guidance.
Displaying arrow view 1. Select "Navigation" and press the control-
ler.
2. Select "Arrow display" and press the con-
troller.
Displaying route map You can have your current position displayed on a map. After starting the destination guidance, the planned route is shown on the map.
1. Select "Navigation" and press the control-
To exit from the menu:
ler.
Select the arrow and press the controller.
2. Select "Map, facing north" or "Map, direc-
tion of travel".
3. Press the controller. At scales of less than 300 miles/500 km, you have the option of deciding whether to orient the map to north or toward your current direc- tion of travel. At scales of 300 miles/500 km or greater, the map always points toward north.
Changing scale Turn the controller to adjust the scale.
Displaying towns/cities and streets of route You can have the names of streets and towns/ cities on your route displayed whenever the destination guidance is active. The distances remaining to be traveled on each individual road and directional arrows are also displayed. Control Center, for principle details, refer to page 16. 1. Select "Navigation" and press the control-
ler.
2. Select "Route list" and press the controller.
Bypassing route sections During destination guidance, you can revise the navigation system's route recommendations to avoid particular stretches of road. Enter the number of miles/kilometers that you want to travel before returning to the original route. Control Center, for principle details, refer to page 16. 1. Select "New route" and press the control-
ler.
2. Turn the controller to enter the desired
number of miles/kilometers and press the controller.
The route is recalculated. To exit from the menu without changing the route:
Select the arrow and press the controller.
127
…
What to do if …
What to do if … > a navigation DVD is inserted, but an instruc- tion to insert the DVD appears on the Con- trol Display? The navigation DVD may not be the correct DVD for the navigation system. This infor- mation is indicated on the DVD label.
> you request the current position of your vehicle, but do not receive a precise dis- play? The system is unable to receive enough GPS signals at your current position owing to obstructions, your current position is not yet available on your navigation DVD, or the system is in the process of calculating your current position. As a rule, reception is guaranteed when you are in the open.
> the destination guidance does not accept a
destination? The data of the destination is not stored on the navigation DVD that is loaded. Select a destination that is as close as possible to the original.
> the destination guidance does not accept
an address without the street name? On the navigation DVD, no downtown area can be determined for the city or town entered. Enter any street, or a destination such as the railway station in the selected town, and then start the destination guid- ance.
> you want to enter a destination for the des-
tination guidance, but it is not possible to select the letters for your desired entry? The data of the destination is not stored on the navigation DVD that is loaded. In this case, the system will not offer you any let- ters to choose from. Select a destination that is as close as possible to the original. > the system stops furnishing directions on which way to turn as you approach intersec- tions? You are driving in an area that has not yet been completely recorded on the naviga- tion DVD. Instead of an arrow indicating a turn, you will see an arrow which indicates the general direction of your planned route. Or you have left the recommended route and the system requires a few seconds to calculate a new recommended route.
> the navigation system does not react to
entries? If the battery was disconnected, it takes about 10 minutes before the system is once again operational.
128
e
129
Entertainment Entertainment
Operation of the radio and CD as well as their tone settings are described in this chapter.
e
On/off and tone
The following audio sources have shared controls and setting options: > Radio Business > CD player > CD changer*
Controls The audio sources can be operated using: > Buttons in the region of the CD player > Control Center > Remote control* > Buttons on the steering wheel, refer to
page 10
Buttons in the region of the CD player The layout of the buttons can vary depending on your vehicle's equipment. Equipment with single drive:
Equipment with two drives:
1 Sound output for entertainment on/off,
volume > Press: switch on/off.
When you switch on, the last set radio station or CD track is played.
> Turn: adjust volume.
Eject CD
2 Drive for audio CDs 4 Station scan/track search > Change radio station. > Select track for CD player and
CD changer.
5 Drive for navigation DVDs
132
Switching on/off In order to switch the Entertainment sound out- put on and off: Press knob 1 next to the CD player.
This symbol on the Control Display indi-
cates that sound output is switched off.
Adjusting volume Turn knob 1 next to the CD player until the desired volume is set. You can also adjust the volume on the steering wheel. The setting for the remote control currently in use is stored.
Tone control You can alter various tone settings, e.g. treble and bass, or the speed-dependent volume increase. The settings are stored for the remote control currently in use.
Changing tone settings Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
Operation using Control Center Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
2. Move the controller back to open "Enter-
tainment".
You have the following choices: > "FM" and "AM": select radio reception. > "WB": request weather station. > "SAT": select satellite radio. > "CD": select CD player or CD changer. > "Set": depending on the audio source,
other adjustments can be made, e.g. with the radio: update station with strongest reception, save station, tone control, sam- ple stations.
2. Press the controller to open the menu.
133
e
3. Select "Entertainment settings" and press
2. Move the controller to the left or right to
the controller.
select "Treble" or "Bass".
4. Select "Audio" and press the controller.
3. Turn the controller until the desired setting
is selected.
Balance and fader You can set the right/left and front/rear volume balance in the same manner as "Treble / Bass".
Speed-dependent volume increase The speed-dependent volume control auto- matically increases the volume with increasing speed. You can set various stages for the increase in volume. 1. Select "Speed volume" and press the con-
troller.
The tone settings can also be selected when you have opened "Entertainment" in the start menu: Select "Set" and then "Tone" and press the controller.
Treble and bass 1. Select "Treble / Bass" and press the con-
troller.
134
2. Turn the controller.
The adjustment is applied; the field can be changed.
Equalizer* You can set individual sound frequency ranges. 1. Select "Equalizer" and press the controller.
Professional LOGIC7 HiFi System* You can select a spatial sound effect that improves the spatial acoustics in all frequency ranges. 1. Select "LOGIC7" and press the controller.
2. Move the controller to the left or right to
select the desired frequency range.
2. Select "Concert hall" or "Theater".
3. Press the controller.
LOGIC7 spatial sound is switched on.
To cancel the stereo effect: Select "Off" and press the controller. LOGIC7 and the LOGIC7 logo are registered trade marks of Lexicon, Inc., a company of the Harman International Group.
3. Turn the controller until the desired setting
is selected.
Resetting tone settings You can reset all tone settings except "Speed volume" to the standard default settings. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Entertainment settings" and press
the controller.
4. Select "Audio" and press the controller. 5. Select "Reset" and press the controller.
135
Controls in the back seat* You can also use a remote control to select Business radio as the audio source and listen to it through the headphones or speakers.
Selecting speakers/headphones 1. Press one of the buttons 1. 2. Select "Rear entertainment using speak-
ers" or "Rear entertainment via head- phones".
Remote control
1 Buttons for menu navigation 2 Volume 3 Station scan/track search > Change radio station. > Select track for CD player and
CD changer.
4 Headphones right/left 5 Exit menu for rear seat entertainment Use the buttons 1 to navigate through the menu. Pressing and move the controller left, right, forward, and back is replaced by pressing the corresponding button, refer to page 16.
Attaching headphones
3. Press
button.
The last audio source selected is displayed: > Speakers selected.
Headphones selected.
To exit from the menu:
Select arrow and press
button.
Settings for the remote control You can limit control and set it so that the audio source of the speakers is also heard through the headphones. Limiting control: Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
Connections for the headphones: Jacks 3.5 mm.
136
2. Press the controller to open the menu. 3. Select "Vehicle settings" and press the
controller.
4. Select "Unlock rear menu" and press the
controller.
Tone control You can adjust the tone right and left for the speakers or for the headphones. 1. Press one of the buttons 1.
2. Select "Rear entertainment using speak-
ers" or "Rear entertainment via head- phones" and press the controller. 3. Adjust the tone, refer to page 133.
5. Select Rear seat and press the controller.
> In order to deactivate the remote control:
"Rear not enabled".
> In order to deactivate the control for the
speakers: "Headphone operation only".
In order to set the headphones to the same audio source as for the speakers: 1. Press the
button to open the start
menu.
2. Move the controller back to open "Enter-
tainment".
3. Press the controller.
Other menu items are displayed.
4. Select "Headphones" and press the con-
troller.
The same audio source will be heard
over the speakers and headphones.
137
4. Press the controller. Stations are shown on the Control Display on the basis of various selection criteria, e.g. "Pre- sets". If "Autostore" does not display any stations or if the stations displayed can no longer be received, to update the station with the stron- gest signal, refer to page 139.
Changing station
Turn the controller. In addition to the stations currently displayed, you can have stations with another selection criterion displayed. You can choose from the following selection criteria: > "Autostore":
For the Station with the strongest signal, refer to page 139.
> "Presets":
Stations you have previously stored, refer to page 140.
Radio
Your radio provides reception the FM and AM wavebands.
Listening to the radio
Press the button if the sound output is switched off. Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
2. Move the controller back to open "Enter-
tainment".
3. Select "FM" or "AM".
138
To change between these different selection criteria of stations: 1. Move the controller forward to change the
field.
2. Select a selection criterion.
4. Select "Scan" and press the controller.
3. Press the controller. You can also change the station on the steering wheel. Buttons next to CD player:
Press the button for the corresponding
direction. The system switches to the next displayed sta- tion.
Sampling stations, scan The system automatically plays a brief sample from each of the stations on the current wave- band. In "Manual", you can set stations that are received in addition to those displayed. Buttons next to CD player:
To start scan, hold down the correspond-
ing direction button. To stop scanning, press button. Control Center, for principle details, refer to page 16. 1. Select "FM" or "AM". 2. Press the controller. 3. Press the controller again.
Other menu items are displayed.
Scan starts. To stop the scan: 1. Press the controller. 2. Select "Scan" and press the controller. This cancels the scan search, and the radio remains on the current station.
Selecting frequency manually Control Center, for principle details, refer to page 16. 1. Select "FM" or "AM". 2. Press the controller. 3. Move the controller forward to change the
field.
4. Select "Manual" and press the controller.
5. Turn the controller to set a certain fre-
quency.
Updating stations with best reception If you are on a longer journey and leave the transmission range of the stations originally set, you can update the list of stations with the best reception.
139
i
Control Center, for principle details, refer to page 16. 1. Select "FM" or "AM". 2. Press the controller. 3. Move the controller forward to change the
field.
4. Select "Autostore" and press the controller.
Storing stations Control Center, for principle details, refer to page 16. 1. Select "FM" or "AM". 2. Select the desired station.
"Set" has been selected.
5. Press the controller again.
Other menu items are displayed.
6. Select "Autostore" and press the controller.
3. Press the controller.
Other menu items are displayed.
4. Select "Store" and press the controller.
The display of the stations with the strongest reception is updated. The stations are dis- played based on their frequencies.
"Presets" is displayed.
5. Turn the controller until the desired mem-
ory position is selected. The number of the memory position appears beside the name or frequency of the station.
6. Press the controller. The station is stored.
140
The channels of the last selection criterion are displayed once again after a short time. The stations are stored for the remote control currently in use.
Changing a memory location Control Center, for principle details, refer to page 16. 1. Select "Presets" and press the controller. 2. Select the desired station. 3. Press the controller.
Other menu items are displayed.
4. Select "Store" and press the controller.
5. Turn the controller until the desired mem-
ory position is selected. The number of the memory position appears beside the name or frequency of the station.
6. Press the controller. The station is stored.
RDS Radio Data System RDS transmits additional information in the FM frequency range. RDS stations have the follow- ing properties: > In the case of broadcasting networks that
transmit over a number of frequencies, there is an automatic switch to the fre- quency with the best reception quality.
> If the reception conditions are good, the station names are shown on the Control Display. If the reception is weak or dis- rupted, it can take some time before the station names appear.
Weather Band* Weather Radio is a service of the National Oce- anic and Atmospheric Administration – NOAA – of the U.S. Department of Commerce. Weather messages are repeated every four to six min- utes and are routinely revised every one to three hours, or more frequently if needed. Most of the stations operate 24 hours daily. During severe weather, National Weather Service forecasters can interrupt the routine weather broadcasts and substitute special warning messages. If you have a question concerning NOAA Weather Radio, please contact your nearest National Weather Service Office, or write to National Weather Service – Attn: W/OM11–, National Oceanic and Atmospheric Administration, 1325 East-West Highway Silver Spring, MD. 20910.
Selecting Weather Band Control Center, for principle details, refer to page 16. 1. Select "WB" and press the controller. 2. Select the Weather Band station and press
the controller.
The Weather Band station may be unavailable in some regions.
Satellite radio* You can receive over 100 different channels with high sound quality. The channels are offered to you in predefined packages. To receive the channels of your choice, you must have this package enabled.
141
i
You may experience signal drops and muting events related to this new tech-
nology.<
Enabling or disabling channels Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
Enabling 1. Select a channel that has not yet been
enabled and press the controller. A telephone number and the electronic serial number, ESN, are displayed.
The electronic serial number is required to enable or disable.<
2. To enable the channels: Dial the phone number.
Disabling 1. Select an enabled channel and press the
controller.
2. Move the controller back to open "Enter-
tainment".
3. Select "SAT".
4. Press the controller.
2. Select "ESN" and press the controller.
The electronic serial number, ESN, is dis- played
The electronic serial number is required to disable.<
3. To disable the channels: Dial the phone number.
Selecting and storing channel 1. Select "SAT" and press the controller.
The channels are displayed.
These channels are enabled.
Channels are shown on the Control Display sorted on the basis of selection criteria.
142
6. Press the controller.
Other menu items are displayed.
7. Select "Play" and press the controller.
2. Select a menu item:
> "Presets":
Up to twelve channels you have stored previously.
> "All channels":
All channels are displayed.
> "Categories":
All channels, sorted by categories, e.g. news, jazz.
Additional information The name of the channel and additional infor- mation on the current track are displayed, e.g. the name of the artist.
3. Press the controller. 4.
If "Categories" has been selected: Select the desired category and press the controller.
1 Artist 2 Track
Storing channel 1. Select desired channel. 2. Press the controller.
Other menu items are displayed.
3. Select "Store" and press the controller.
The channels of this category are displayed. Select a channel marked with this sym-
5.
bol.
"Presets" is displayed.
143
4. Turn the controller to select a memory loca-
tion and press the controller.
The channel is stored. The channels of the last selection criterion are displayed once again after a short time.
Changing channel with buttons next to CD player
Press the button for the corresponding
direction. The system switches to the next enabled chan- nel.
Notes When there is a signal blockage or the transmis- sion is suspended momentarily for more than 4 seconds, a message appears on the Control Display.
Service may be interrupted or unavailable for specific reasons such as environmen-
tal or topographic conditions and others that satellite radio cannot directly control. Signal may not be available under tunnels, in parking garages, next to tall buildings, nearby trees with dense foliage, nearby mountains or other possible strong sources of radio interfer- ence. Service should resume normally after the source of signal unavailability has been cleared.<
