Login- Download PDF Manual
-
entered destination, upon restarting you will see the question "Continue guidance to desti- nation?". The destination guidance starts automatically after a short time. To start the destination guidance: Select "Yes" and press the controller.
Displaying current position You can have your current position displayed even when the destination guidance is switched off.
If the navigation system is unable to identify a town or city, your current map coordinates will appear. To exit from the menu:
Select the arrow and press the controller.
You can also have the current position dis- played on a map, refer to page 126.
Destination guidance through voice instructions
Switching voice instructions on/off Control Center, for principle details, refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Display settings" and press the
controller.
125
4. Select "Languages" and press the control-
ler.
Adjusting volume 1. Repeat the last voice instruction, if neces-
sary.
2. Turn the button during the voice instruction
to select the desired volume.
5. Select "Navigation voice instructions on"
and press the controller.
The voice instructions are switched on.
The setting is stored for the remote control cur- rently in use.
Repeat voice instructions and cancel With the programmable buttons on the steering wheel, you can also execute the following func- tions, refer to page 46: > Repeat the voice instruction:
Press button.
> Switch voice instructions on/off:
Hold the button down.
126
This volume is independent of the volume of the audio and video sources. The setting is stored for the remote control cur- rently in use.
Route display You have the option of displaying various views of the route during destination guidance.
Displaying arrow view 1. Select "Navigation" and press the control-
ler.
2. Select "Arrow display" and press the con-
troller.
Displaying route map You can have your current position displayed on a map. After starting the destination guidance, the planned route is shown on the map.
1. Select "Navigation" and press the control-
To exit from the menu:
ler.
Select the arrow and press the controller.
2. Select "Map, facing north" or "Map, direc-
tion of travel".
3. Press the controller. At scales of less than 300 miles/500 km, you have the option of deciding whether to orient the map to north or toward your current direc- tion of travel. At scales of 300 miles/500 km or greater, the map always points toward north.
Changing scale Turn the controller to adjust the scale.
Displaying towns/cities and streets of route You can have the names of streets and towns/ cities on your route displayed whenever the destination guidance is active. The distances remaining to be traveled on each individual road and directional arrows are also displayed. Control Center, for principle details, refer to page 16. 1. Select "Navigation" and press the control-
ler.
2. Select "Route list" and press the controller.
Bypassing route sections During destination guidance, you can revise the navigation system's route recommendations to avoid particular stretches of road. Enter the number of miles/kilometers that you want to travel before returning to the original route. Control Center, for principle details, refer to page 16. 1. Select "New route" and press the control-
ler.
2. Turn the controller to enter the desired
number of miles/kilometers and press the controller.
The route is recalculated. To exit from the menu without changing the route:
Select the arrow and press the controller.
127
…
What to do if …
What to do if … > a navigation DVD is inserted, but an instruc- tion to insert the DVD appears on the Con- trol Display? The navigation DVD may not be the correct DVD for the navigation system. This infor- mation is indicated on the DVD label.
> you request the current position of your vehicle, but do not receive a precise dis- play? The system is unable to receive enough GPS signals at your current position owing to obstructions, your current position is not yet available on your navigation DVD, or the system is in the process of calculating your current position. As a rule, reception is guaranteed when you are in the open.
> the destination guidance does not accept a
destination? The data of the destination is not stored on the navigation DVD that is loaded. Select a destination that is as close as possible to the original.
> the destination guidance does not accept
an address without the street name? On the navigation DVD, no downtown area can be determined for the city or town entered. Enter any street, or a destination such as the railway station in the selected town, and then start the destination guid- ance.
> you want to enter a destination for the des-
tination guidance, but it is not possible to select the letters for your desired entry? The data of the destination is not stored on the navigation DVD that is loaded. In this case, the system will not offer you any let- ters to choose from. Select a destination that is as close as possible to the original. > the system stops furnishing directions on which way to turn as you approach intersec- tions? You are driving in an area that has not yet been completely recorded on the naviga- tion DVD. Instead of an arrow indicating a turn, you will see an arrow which indicates the general direction of your planned route. Or you have left the recommended route and the system requires a few seconds to calculate a new recommended route.
> the navigation system does not react to
entries? If the battery was disconnected, it takes about 10 minutes before the system is once again operational.
128
e
129
Entertainment Entertainment
Operation of the radio and CD as well as their tone settings are described in this chapter.
e
On/off and tone
The following audio sources have shared controls and setting options: > Radio Business > CD player > CD changer*
Controls The audio sources can be operated using: > Buttons in the region of the CD player > Control Center > Remote control* > Buttons on the steering wheel, refer to
page 10
Buttons in the region of the CD player The layout of the buttons can vary depending on your vehicle's equipment. Equipment with single drive:
Equipment with two drives:
1 Sound output for entertainment on/off,
volume > Press: switch on/off.
When you switch on, the last set radio station or CD track is played.
> Turn: adjust volume.
Eject CD
2 Drive for audio CDs 4 Station scan/track search > Change radio station. > Select track for CD player and
CD changer.
5 Drive for navigation DVDs
132
Switching on/off In order to switch the Entertainment sound out- put on and off: Press knob 1 next to the CD player.
This symbol on the Control Display indi-
cates that sound output is switched off.
Adjusting volume Turn knob 1 next to the CD player until the desired volume is set. You can also adjust the volume on the steering wheel. The setting for the remote control currently in use is stored.
Tone control You can alter various tone settings, e.g. treble and bass, or the speed-dependent volume increase. The settings are stored for the remote control currently in use.
Changing tone settings Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
Operation using Control Center Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
2. Move the controller back to open "Enter-
tainment".
You have the following choices: > "FM" and "AM": select radio reception. > "WB": request weather station. > "SAT": select satellite radio. > "CD": select CD player or CD changer. > "Set": depending on the audio source,
other adjustments can be made, e.g. with the radio: update station with strongest reception, save station, tone control, sam- ple stations.
2. Press the controller to open the menu.
133
e
3. Select "Entertainment settings" and press
2. Move the controller to the left or right to
the controller.
select "Treble" or "Bass".
4. Select "Audio" and press the controller.
3. Turn the controller until the desired setting
is selected.
Balance and fader You can set the right/left and front/rear volume balance in the same manner as "Treble / Bass".
Speed-dependent volume increase The speed-dependent volume control auto- matically increases the volume with increasing speed. You can set various stages for the increase in volume. 1. Select "Speed volume" and press the con-
troller.
The tone settings can also be selected when you have opened "Entertainment" in the start menu: Select "Set" and then "Tone" and press the controller.
Treble and bass 1. Select "Treble / Bass" and press the con-
troller.
134
2. Turn the controller.
The adjustment is applied; the field can be changed.
Equalizer* You can set individual sound frequency ranges. 1. Select "Equalizer" and press the controller.
Professional LOGIC7 HiFi System* You can select a spatial sound effect that improves the spatial acoustics in all frequency ranges. 1. Select "LOGIC7" and press the controller.
2. Move the controller to the left or right to
select the desired frequency range.
2. Select "Concert hall" or "Theater".
3. Press the controller.
LOGIC7 spatial sound is switched on.
To cancel the stereo effect: Select "Off" and press the controller. LOGIC7 and the LOGIC7 logo are registered trade marks of Lexicon, Inc., a company of the Harman International Group.
3. Turn the controller until the desired setting
is selected.
Resetting tone settings You can reset all tone settings except "Speed volume" to the standard default settings. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Entertainment settings" and press
the controller.
4. Select "Audio" and press the controller. 5. Select "Reset" and press the controller.
135
Controls in the back seat* You can also use a remote control to select Business radio as the audio source and listen to it through the headphones or speakers.
Selecting speakers/headphones 1. Press one of the buttons 1. 2. Select "Rear entertainment using speak-
ers" or "Rear entertainment via head- phones".
Remote control
1 Buttons for menu navigation 2 Volume 3 Station scan/track search > Change radio station. > Select track for CD player and
CD changer.
4 Headphones right/left 5 Exit menu for rear seat entertainment Use the buttons 1 to navigate through the menu. Pressing and move the controller left, right, forward, and back is replaced by pressing the corresponding button, refer to page 16.
Attaching headphones
3. Press
button.
The last audio source selected is displayed: > Speakers selected.
Headphones selected.
To exit from the menu:
Select arrow and press
button.
Settings for the remote control You can limit control and set it so that the audio source of the speakers is also heard through the headphones. Limiting control: Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
Connections for the headphones: Jacks 3.5 mm.
136
2. Press the controller to open the menu. 3. Select "Vehicle settings" and press the
controller.
4. Select "Unlock rear menu" and press the
controller.
Tone control You can adjust the tone right and left for the speakers or for the headphones. 1. Press one of the buttons 1.
2. Select "Rear entertainment using speak-
ers" or "Rear entertainment via head- phones" and press the controller. 3. Adjust the tone, refer to page 133.
5. Select Rear seat and press the controller.
> In order to deactivate the remote control:
"Rear not enabled".
> In order to deactivate the control for the
speakers: "Headphone operation only".
In order to set the headphones to the same audio source as for the speakers: 1. Press the
button to open the start
menu.
2. Move the controller back to open "Enter-
tainment".
3. Press the controller.
Other menu items are displayed.
4. Select "Headphones" and press the con-
troller.
The same audio source will be heard
over the speakers and headphones.
137
4. Press the controller. Stations are shown on the Control Display on the basis of various selection criteria, e.g. "Pre- sets". If "Autostore" does not display any stations or if the stations displayed can no longer be received, to update the station with the stron- gest signal, refer to page 139.
Changing station
Turn the controller. In addition to the stations currently displayed, you can have stations with another selection criterion displayed. You can choose from the following selection criteria: > "Autostore":
For the Station with the strongest signal, refer to page 139.
> "Presets":
Stations you have previously stored, refer to page 140.
Radio
Your radio provides reception the FM and AM wavebands.
Listening to the radio
Press the button if the sound output is switched off. Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
2. Move the controller back to open "Enter-
tainment".
3. Select "FM" or "AM".
138
To change between these different selection criteria of stations: 1. Move the controller forward to change the
field.
2. Select a selection criterion.
4. Select "Scan" and press the controller.
3. Press the controller. You can also change the station on the steering wheel. Buttons next to CD player:
Press the button for the corresponding
direction. The system switches to the next displayed sta- tion.
Sampling stations, scan The system automatically plays a brief sample from each of the stations on the current wave- band. In "Manual", you can set stations that are received in addition to those displayed. Buttons next to CD player:
To start scan, hold down the correspond-
ing direction button. To stop scanning, press button. Control Center, for principle details, refer to page 16. 1. Select "FM" or "AM". 2. Press the controller. 3. Press the controller again.
Other menu items are displayed.
Scan starts. To stop the scan: 1. Press the controller. 2. Select "Scan" and press the controller. This cancels the scan search, and the radio remains on the current station.
Selecting frequency manually Control Center, for principle details, refer to page 16. 1. Select "FM" or "AM". 2. Press the controller. 3. Move the controller forward to change the
field.
4. Select "Manual" and press the controller.
5. Turn the controller to set a certain fre-
quency.
Updating stations with best reception If you are on a longer journey and leave the transmission range of the stations originally set, you can update the list of stations with the best reception.
139
i
Control Center, for principle details, refer to page 16. 1. Select "FM" or "AM". 2. Press the controller. 3. Move the controller forward to change the
field.
4. Select "Autostore" and press the controller.
Storing stations Control Center, for principle details, refer to page 16. 1. Select "FM" or "AM". 2. Select the desired station.
"Set" has been selected.
5. Press the controller again.
Other menu items are displayed.
6. Select "Autostore" and press the controller.
3. Press the controller.
Other menu items are displayed.
4. Select "Store" and press the controller.
The display of the stations with the strongest reception is updated. The stations are dis- played based on their frequencies.
"Presets" is displayed.
5. Turn the controller until the desired mem-
ory position is selected. The number of the memory position appears beside the name or frequency of the station.
6. Press the controller. The station is stored.
140
The channels of the last selection criterion are displayed once again after a short time. The stations are stored for the remote control currently in use.
Changing a memory location Control Center, for principle details, refer to page 16. 1. Select "Presets" and press the controller. 2. Select the desired station. 3. Press the controller.
Other menu items are displayed.
4. Select "Store" and press the controller.
5. Turn the controller until the desired mem-
ory position is selected. The number of the memory position appears beside the name or frequency of the station.
6. Press the controller. The station is stored.
RDS Radio Data System RDS transmits additional information in the FM frequency range. RDS stations have the follow- ing properties: > In the case of broadcasting networks that
transmit over a number of frequencies, there is an automatic switch to the fre- quency with the best reception quality.
> If the reception conditions are good, the station names are shown on the Control Display. If the reception is weak or dis- rupted, it can take some time before the station names appear.
Weather Band* Weather Radio is a service of the National Oce- anic and Atmospheric Administration – NOAA – of the U.S. Department of Commerce. Weather messages are repeated every four to six min- utes and are routinely revised every one to three hours, or more frequently if needed. Most of the stations operate 24 hours daily. During severe weather, National Weather Service forecasters can interrupt the routine weather broadcasts and substitute special warning messages. If you have a question concerning NOAA Weather Radio, please contact your nearest National Weather Service Office, or write to National Weather Service – Attn: W/OM11–, National Oceanic and Atmospheric Administration, 1325 East-West Highway Silver Spring, MD. 20910.
Selecting Weather Band Control Center, for principle details, refer to page 16. 1. Select "WB" and press the controller. 2. Select the Weather Band station and press
the controller.
The Weather Band station may be unavailable in some regions.
Satellite radio* You can receive over 100 different channels with high sound quality. The channels are offered to you in predefined packages. To receive the channels of your choice, you must have this package enabled.
141
i
You may experience signal drops and muting events related to this new tech-
nology.<
Enabling or disabling channels Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
Enabling 1. Select a channel that has not yet been
enabled and press the controller. A telephone number and the electronic serial number, ESN, are displayed.
The electronic serial number is required to enable or disable.<
2. To enable the channels: Dial the phone number.
Disabling 1. Select an enabled channel and press the
controller.
2. Move the controller back to open "Enter-
tainment".
3. Select "SAT".
4. Press the controller.
2. Select "ESN" and press the controller.
The electronic serial number, ESN, is dis- played
The electronic serial number is required to disable.<
3. To disable the channels: Dial the phone number.
Selecting and storing channel 1. Select "SAT" and press the controller.
The channels are displayed.
These channels are enabled.
Channels are shown on the Control Display sorted on the basis of selection criteria.
142
6. Press the controller.
Other menu items are displayed.
7. Select "Play" and press the controller.
2. Select a menu item:
> "Presets":
Up to twelve channels you have stored previously.
> "All channels":
All channels are displayed.
> "Categories":
All channels, sorted by categories, e.g. news, jazz.
Additional information The name of the channel and additional infor- mation on the current track are displayed, e.g. the name of the artist.
3. Press the controller. 4.
If "Categories" has been selected: Select the desired category and press the controller.
1 Artist 2 Track
Storing channel 1. Select desired channel. 2. Press the controller.
Other menu items are displayed.
3. Select "Store" and press the controller.
The channels of this category are displayed. Select a channel marked with this sym-
5.
bol.
"Presets" is displayed.
143
4. Turn the controller to select a memory loca-
tion and press the controller.
The channel is stored. The channels of the last selection criterion are displayed once again after a short time.
Changing channel with buttons next to CD player
Press the button for the corresponding
direction. The system switches to the next enabled chan- nel.
Notes When there is a signal blockage or the transmis- sion is suspended momentarily for more than 4 seconds, a message appears on the Control Display.
Service may be interrupted or unavailable for specific reasons such as environmen-
tal or topographic conditions and others that satellite radio cannot directly control. Signal may not be available under tunnels, in parking garages, next to tall buildings, nearby trees with dense foliage, nearby mountains or other possible strong sources of radio interfer- ence. Service should resume normally after the source of signal unavailability has been cleared.<
144
CD player and CD changer
Listening to CDs
CD player: starting CD
3. Select "CD" and press the controller.
4. On vehicles with a CD changer, select "CD"
and press the controller to start the CD player.
Playback starts automatically if the sound out- put is switched on. To eject the CD, press the CD player. The CD emerges slightly from the drive.
button on the
When equipped with two drives: The upper drive is for audio CDs. Insert the CD into the drive with the labeled side up. Playback starts automatically if the sound out- put is on. To start playback when there is already a CD in the drive: Control Center, for principle details, refer to page 16. 1. Press
button.
This opens the start menu.
2. Move the controller back to open "Enter-
tainment".
145
CD changer: starting CD 1. Fill the CD magazine and insert, refer to
page 147.
Control Center, for principle details, refer to page 16. 2. Press
button.
This opens the start menu.
The CD will start play at the start of the track. The track is displayed on the Control Display. You can also select the track on the steering wheel. Control Center, for principle details, refer to page 16. Select a track by turning the controller.
3. Move the controller back to open "Enter-
tainment".
4. Select "CD" and press the controller. 5. Select the desired CD and press the con-
troller.
Repeating a track Control Center, for principle details, refer to page 16. 1. Select "Set" and press the controller.
Other menu items are displayed.
At the end of the last track, the next CD will be selected. If new CDs have been placed in the CD maga- zine, playback starts with the lowest CD, e.g. CD 1, track 1. The CD magazine's load status is indicated on the Control Display.
Selecting a track Buttons next to CD player:
Press the button for the corresponding
direction repeatedly, continuing until you reach the desired track on the current CD.
146
2. Select "Repeat" and press the controller.
The current music track on the CD is repeated.
Stop repeating: Press controller, select "Repeat" and press controller again.
CD magazine
Sampling tracks, scan The system automatically plays a brief sample from each of the tracks on the current CD. Control Center, for principle details, refer to page 16. 1. Select "Set" and press the controller.
Other menu items are displayed.
2. Select "Scan" and press the controller. To stop the scan: 1. Press the controller. 2. Select "Scan" and press the controller. This cancels the scan, and the selected track remains.
Random play sequence In this mode, the music tracks on the current CD are played once in a random sequence. Control Center, for principle details, refer to page 16. 1. Select "Set" and press the controller.
Other menu items are displayed.
2. Select "Random" and press the controller. Stop random function: Press controller, select "Random" and press controller again.
Fast forward/reverse Buttons next to CD player:
Press and hold the button for the corre-
sponding direction.
The BMW CD changer for six CDs is installed in the glove compartment.
Remove CD magazine To insert or remove CDs from the CD maga- zine 1, you must first remove it from the CD changer: 1. Press button 2.
The CD magazine 1 is ejected.
2. Remove CD magazine.
Inserting/removing CDs from CD magazine
When inserting or removing CDs, remember to hold them only by their edges, taking care to avoid touching the data side with its reflective CD memory surface. Inserting CDs: Insert the CD in its slot with the label side on top. Removing CDs: Pull out the desired drawer, refer to arrow, and remove the corresponding CD.
147
Inserting CD magazine
have copied at home. If the CD that you have loaded in the drive does not play, check to ensure that the CD has been inserted correctly and inspect it for signs of defects. High levels of humidity can lead to condensa- tion on the laser's scan lens and temporarily prevent it from reading the CD. Always hold CDs by the edges; do not touch the reflecting CD memory surface.
Push in the CD magazine as far as possible in the direction of the arrow. The CD changer automatically reads in the loaded CDs and is then ready for operation.
Care instructions You can find everything you need to know on this topic by consulting the separate Caring for your vehicle brochure.
Notes Data from CDs, CD-Rs and CD-RWs can be played.
