Login- Download PDF Manual
-
Entertainment
CD/multimedia
Playback menu Depending on the particular device, some of the functions may not be available. Symbol Function Next track Fast forward: press and hold the symbol. Previous music track Reverse: press and hold the symbol.
Disconnecting the audio connection 1. "CD/Multimedia" 2. "Bluetooth® (audio)" 3. Highlight the desired device. 4. Open "Options". 5. "Configure phone"
If necessary, "Bluetooth® audio".
6. "Audio" 7. "OK" Unpairing a device 1. "CD/Multimedia" 2. "Bluetooth® (audio)" 3. 4. Highlight the device that is to be unpaired. 5. Open "Options". 6. "Remove phone from list" What to do if... Information on suitable devices can be found at www.bmwusa.com/bluetooth.
Suitable mobile phones, refer to page 228. The device is not supported by the vehicle. ▷ Perform a software update, refer to
page 217, if needed.
The device could not be paired or connected. ▷ Do the Bluetooth passkeys on the device
and the vehicle match? Enter the same passkey on the device and via iDrive.
▷ Did it take longer than 30 seconds to enter the passkey? Repeat the pairing procedure. ▷ Are too many Bluetooth devices connected to the device or vehicle? Delete connections with other devices if necessary.
▷ Is the mobile phone in power-save mode or does it have only a limited remaining battery life? Charge the mobile phone in the snap- in adapter or via the charging cable.
▷ Depending on the mobile phone, it is possi‐ ble that only one device can be connected to the vehicle. Unpair the connected device from the vehicle and pair and connect only one device.
▷ The device no longer reacts? Switch the de‐
vice off and on again.
▷ Repeat the pairing procedure. Music cannot be played back. ▷ Start the program for playing back music
data on the device and select a track on the device if necessary.
▷ Switch the radio off and on again. Music files can only be played back softly. ▷ Adjust the volume settings on the device. Playback is disturbed when buttons are pressed or by other messages on the device. ▷ Switch off the button tones and other signal
tones on the device.
Playback is interrupted by a telephone call or traffic bulletin and is not resumed automatically. ▷ Switch the radio off and on again. Playback is not possible if the mobile phone is connected both via Bluetooth Audio and via the
216
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
CD/multimedia
Entertainment
4. "Software update" 5. "Update software"
6. "Start update" 7. "OK" All listed software updates are installed. Restoring the previous version If it should become necessary, the software ver‐ sion prior to the last software update can be re‐ stored. The previous version may only be restored when the vehicle is stationary. 1. "Settings" 2. "Software update" 3. "Restore previous version" 4. "OK" Double-click. All listed software updates are removed. Note While the software is being updated or a previ‐ ous version is being restoredBMW Assist, Office functions and the connected devices are tem‐ porarily unavailable. Wait several minutes for the functions to become available again.
extended connectivity of the music player in the mobile phone. ▷ Disconnect one of the two connections; for example, disconnect the audio connection, refer to page 216, and restart playback.
If all points in this list have been checked and the required function is still not available, please contact the hotline or service center. Software Update The vehicle supports various external devices depending on the current software version. With a software update, the vehicle can support new cell phones or new external device, for example. The updating of the software is done via: ▷ USB.
Updates and related current information is available at www.bmw.com/update.
▷ TeleService.
Existing software can be updated directly via the vehicle.
Displaying the current version The currently installed software is displayed. 1. "Settings" 2. "Software update" 3. "Show current version" SelectDesired version to displayAdditional in‐ formation. Updating software via USB The software may only be updated when the ve‐ hicle is stationary. 1. Store the file for the software-update in the
main director of a USB flash drive. Insert the USB flash drive into the USB in‐ terface of the USB audio interface in the center armrest. An update via the USB in‐ terface in the glove compartment is not pos‐ sible.
2.
3. "Settings"
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
217
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Communication
All of the options available to you for mobile communication with family, friends, business partners, and service providers are described in this chapter.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Communication
Business mobile phone preparation package
Business mobile phone preparation package Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
Displaying the vehicle identification number and software part number The vehicle identification number and software part number are needed to determine which mo‐ bile phones are supported by the mobile phone preparation package. The software version of the mobile phone may also be required. 1. "Telephone" 2. Open "Options". 3. "Bluetooth® info" 4. "Display system information" These approved mobile phones with a certain software version, support the vehicle functions described below. Malfunctions may occur with other mobile phones or software versions. Do not operate a mobile phone that is connected to the vehicle on the mobile phone keypad, as this may lead to a malfunction. Notes At high temperatures, the charge function of the mobile phone can be limited where appropriate and the functions are no longer executed. When the mobile phone is used via the vehicle, heed the operating manual of the mobile phone.
Pairing/unpairing the mobile phone General information The following functions are available: ▷ Use of a mobile phone as a telephone. Functions supported by the mobile phone are shown as a symbol during pairing. White symbol: the function is active.
At a glance The concept After the mobile phone is paired once with the vehicle, the mobile phone can be operated via iDrive, the steering wheel buttons and via voice- activated command. A paired mobile phone is automatically detected as soon as it is located inside the vehicle, when the ignition is switched on. Up to four mobile phones can be paired. Certain functions may need to be enabled by the mobile service provider.
Using the mobile phone while driving Make entries only when traffic and road
conditions allow. Do not hold the mobile phone in your hand while you are driving; use the hands-free system instead. If you do not ob‐ serve this precaution, you can endanger the ve‐ hicle occupants and other road users.◀
Approved mobile phones Details on which mobile phones and external devices with a Bluetooth interface are sup‐ ported by the mobile phone preparation pack‐ age can be obtained at www.bmwusa.com/blue‐ tooth.
220
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Business mobile phone preparation package
Communication
Gray symbol: the function is inactive. Symbol
Function Telephone.
Requirements ▷ The mobile phone is suitable. ▷ The mobile phone is ready for operation. ▷ Bluetooth is activated in the vehicle, refer to
page 222, and on the mobile phone.
▷ Bluetooth presettings may need to be made on the mobile phone, e.g., for a connection without confirmation or visibility, refer to the mobile phone operating instructions.
▷ A number with at least four and a maximum
of 16 digits was defined as the Bluetooth passkey, depending on the mobile phone. It is only required once for pairing.
▷ The ignition is switched on. Pairing and connecting
Pairing the mobile phone To avoid becoming distracted and posing an unnecessary hazard both to your own vehi‐ cle's occupants and to other road users, only pair the mobile phone while the vehicle is sta‐ tionary.◀ 1. "Telephone" 2. "Bluetooth® (phone)"
3. "Add new phone"
The Bluetooth name of the vehicle is dis‐ played.
4. To perform additional steps on the mobile phone, refer to the mobile phone operating instructions: e.g. search for or connect the Bluetooth device or a new device. The Bluetooth name of the vehicle appears on the mobile phone display.
5. Select the Bluetooth name of the vehicle on
the mobile phone display.
6. You are prompted by the iDrive or mobile
phone to enter the same Bluetooth passkey. Enter the passkey and confirm. or Compare the control number in the display of the vehicle to the control number in the display of the mobile phone. Confirm the control number in the mobile phone and in the vehicle. "OK"
7. Select the functions for which the mobile
phone is to be used.
8. "OK" If the pairing was successful, the mobile phone appears at the top of the list of mobile phones. Four mobile phones can be paired with the ve‐ hicle at once. If pairing was unsuccessful: what to do if, refer to page 222. Following the initial pairing ▷ The mobile phone is detected/connected in
the vehicle within a short period of time when the engine is running or the ignition is switched on.
▷ After they have been identified, phone book
entries are transferred from the SIM card and/or mobile phone to the vehicle; this de‐ pends on the mobile phone.
▷ Four mobile phones can be paired. ▷ Specific settings may be necessary in some mobile phones, e.g., authorization or a se‐ cure connection; refer to the mobile phone operating instructions.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
221
Communication
Business mobile phone preparation package
Activating/deactivating Bluetooth Bluetooth is not permitted everywhere. Comply with all safety guidelines and regulations. 1. "Telephone" 2. "Options" Open. 3. "Bluetooth®"
Connecting a particular mobile phone If more than one mobile phone is detected by the vehicle, the mobile phone at the top of the list is connected. A different mobile phone can be connected by selecting it. 1. "Telephone" 2. "Bluetooth® (phone)"
All paired mobile phones are listed.
3. Select the mobile phone that is to be con‐
nected.
Unpairing the mobile phone 1. "Telephone" 2. "Bluetooth® (phone)"
All paired mobile phones are listed.
3. Highlight the mobile phone that is to be un‐
paired.
4. "Options" Open. 5. "Remove phone from list" What to do if... Information on suitable mobile phones, refer to page 220. The mobile phone could not be paired or con‐ nected.
▷ Is Bluetooth activated in the vehicle and on the mobile phone? Activate Bluetooth in the vehicle and on the mobile phone.
▷ Do the Bluetooth passkeys on the mobile phone and the vehicle match? Enter the same passkey on the mobile phone and via iDrive.
▷ Do the control numbers on the mobile phone
and vehicle match? Select correct control number on the mobile phone; repeat pairing, if necessary.
▷ Did it take longer than 30 seconds to enter the passkey? Repeat the pairing procedure. ▷ Periods for confirming the control numbers
on the mobile phone longer than 30 sec‐ onds? Repeat the pairing procedure.
▷ Are too many Bluetooth devices connected to the mobile phone or vehicle? Delete con‐ nections with other devices if necessary.
▷ Is the mobile phone in power-save mode or does it have only a limited remaining battery life? Charge the mobile phone via the charg‐ ing cable.
The mobile phone no longer reacts. ▷ Switch the mobile phone off and on again. ▷ Ambient temperatures too high or too low? Do not subject the mobile phone to extreme ambient temperatures.
Not all phone book entries are displayed. ▷ Transmission of the phone book entries is
not yet complete.
▷ It is possible that only the phone book en‐ tries of the mobile phone or the SIM card are transmitted.
▷ It may not be possible to display phone book
entries with special characters.
▷ The number of phone book entries being
stored is too high.
The phone connection quality is poor. ▷ The strength of the Bluetooth signal on the mobile phone can be adjusted, depending on the mobile phone.
222
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Business mobile phone preparation package
Communication
▷ Place mobile phone in the vicinity of the cen‐
ter console.
If all points in this list have been checked and the required function is still not available, please contact the hotline or service center.
Controls Adjusting the volume Turn the knob until the desired volume is se‐ lected. The setting is stored for the remote con‐ trol currently in use. Incoming call Receiving calls If the number of the caller is stored in the phone book and is transmitted by the network, the name of the contact is displayed. Accepting a call Via iDrive
"Accept"
Via the button on the steering wheel
Press the button.
Via the instrument cluster "Accept"
Rejecting a call Via iDrive "Reject"
Via the instrument cluster "Reject" Ending a call Via iDrive 1. "Telephone" 2. Select an active call. 3.
"Active calls"
Via the button on the steering wheel
Press the button.
Via the instrument cluster "End call" Entering a phone number Dialing a number When entering phone numbers, you can switch between entering letters and numbers. Service numbers can be entered more easily, e. g. 1-888-BMW-CARD. 1. "Telephone" 2. "Dial number"
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
223
Communication
Business mobile phone preparation package
3. Select the digits individually.
4. Convert to letters as required.
Select the symbol.
Select the letters individually.
5.
Select the symbol.
Select symbol to convert to numbers.
Phone numbers can also be entered by voice. Only numbers can be spoken. Letter/number assignment
Letter ABC DEF GHI JKL MNO PQRS TUV WXYZ
Number
Calls with multiple parties General information You can switch between calls or connect two calls to a single conference call. These functions must be supported by the mobile phone and service provider.
Accepting a call while speaking to another party This function might have to be activated by the service provider and the mobile phone must be adjusted accordingly. If a second call comes in during an ongoing call, a call waiting signal sounds where appropriate.
"Accept"
The call is accepted and the existing call is put on hold. Establishing a second call Establish an additional call during an active call. 1. "Telephone" 2. "Active calls" 3.
"Hold"
The existing call is put on hold.
4. Dial the new phone number or select it from
a list.
Switching between two calls, hold call The active call is displayed in white. The call on hold is displayed in gray.
"Swap calls"
The call on hold is resumed. Establishing a conference call Two calls can be connected to a single tele‐ phone conference call. 1. Establish two calls. 2.
"Conference call"
224
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Business mobile phone preparation package
Communication
"Microphone mute"
When terminating a conference call, both calls are ended. If one call is terminated by another party, the other call can be continued. Switching the microphone to mute When a call is active, the microphone can be muted. 1. "Telephone" 2. "Active calls" 3. A microphone that has been switched to mute is automatically reactivated: ▷ When a new connection is established. ▷ When switching between call parties. DTMF suffix dialing DTMF suffix dialing can be used for gaining ac‐ cess to network services or for controlling devi‐ ces, e.g., to make a remote inquiry of an answer‐ ing machine. The DTMF code is needed for this purpose. 1. "Telephone" 2. Select the contact from a list or "Dial
number". "Keypad dialing"
3. 4. Enter the DTMF code via iDrive. Phone book Displays The phone book accesses the contacts and shows all contacts for which a phone number has been stored. The entries can be selected to make a call. 1. "Telephone" 2. "Phone book" All contacts with a phone number are displayed. A symbol indicates the storage location of the contacts.
Calling a contact
Symbol Meaning
Contact with one stored phone num‐ ber. Contact with more than one stored phone number. Call not possible; mobile phone with‐ out reception or network, or Service Request is active.
For contacts with one stored phone number: se‐ lect the required contact. The connection is es‐ tablished. For contacts with more than one stored phone number: select the required contact and the phone number. The connection is established. Editing a contact Changing the entries in "Contacts". When a contact is changed, the changes are not stored on the mobile phone. A copy of the entry is stored in the vehicle. 1. Highlight the contact. 2. Open "Options". 3. "Edit entry" The contact can be edited.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
225
Communication
Business mobile phone preparation package
Redialing General information The list of dialed numbers in the mobile phone is transmitted to the vehicle depending on the mobile phone. The 20 phone numbers dialed last are displayed. The sorting order of the phone numbers depends on the particular mo‐ bile phone. Dialing the number via the instrument cluster This is possible when there is no active call.
1.
wheel.
Press the button on the steering
2. Select the desired phone number. The connection is established. Dialing a number via iDrive 1. "Telephone" 2. "Redial" 3. Select the desired entry. The connection is established. Deleting a single entry or all entries The erasure of entries depends on the mobile phone. 1. Highlight the entry. 2. "Options" Open. 3. "Delete entry" or"Delete list" Saving an entry in the contacts 1. Highlight the entry. 2. "Options" Open. 3. "Store as new contact" or "Add to existing
contact"
4. Select the contact, if necessary. 5. Select the type of number: "Home",
"Business", "Mobile" or "Other"
6. Complete the entries if necessary. 7. "Store contact" Received calls Displaying calls The list of incoming calls on the mobile phone is transmitted to the vehicle, depending on the mobile phone. The 20 telephone calls that were last received are displayed. The sorting order and display of the phone numbers depend on the particular mobile phone. 1. "Telephone" 2. "Received calls"
Calling a number from the list Selecting an entry. The connection is established. Deleting a single entry or all entries The erasure of entries depends on the mobile phone. 1. Highlight the entry. 2. "Options" Open. 3. "Delete entry" or"Delete list" Saving an entry in the contacts 1. Highlight the entry. 2. "Options" Open. 3. "Store as new contact" or "Add to existing
contact"
4. Select the contact, if necessary.
226
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Business mobile phone preparation package
Communication
5. Select the type of number: "Home",
"Business", "Mobile" or "Other"
6. Complete the entries if necessary. 7. "Store contact" Hands-free system General information Calls that are being made on the hands-free system can be continued on the mobile phone and vice versa. From the mobile phone to the hands- free system Calls that were begun outside of the Bluetooth range of the vehicle can be continued on the hands-free system with the ignition switched on. Depending on the mobile phone, the system au‐ tomatically switches to the hands-free system. If the system does not switch over automatically, follow the instructions on the mobile phone dis‐ play; refer also to the mobile phone operating instructions. From the hands-free system to the mobile phone Calls that are made on the hands-free system can in some cases be continued on the mobile phone; this depends on the mobile phone. Follow the instructions on the mobile phone dis‐ play; refer also to the mobile phone operating instructions.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
227
Communication
Professional mobile phone preparation package
Professional mobile phone preparation package Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
Snap-in adapter The snap-in adapter is used to: ▷ Hold the mobile phone. ▷ Recharge the battery. ▷ Connect the mobile phone to an outside an‐
tenna of the vehicle. This provides for better network reception and consistent sound quality.
At a glance The concept Mobile phones or other external devices such as audio players can be connected to the vehicle via Bluetooth. After these devices are paired once, they are recognized automatically when the ignition is switched on as soon as they are inside the ve‐ hicle and can be operated via iDrive, the buttons on the steering wheel, and via voice activation. Depending on their functionality, external devi‐ ces can be used via the vehicle as a telephone or as an audio source. The telephone functions are described in the following. Operation of the audio functions, refer to page 213. Up to four external devices can be paired. Certain functions may need to be enabled by the mobile phone provider or service provider. Using the mobile phone while driving Make entries only when traffic and road
conditions allow. Do not hold the mobile phone in your hand while you are driving; use the hands-free system instead. If you do not ob‐ serve this precaution, you can endanger the ve‐ hicle occupants and other road users.◀
Approved mobile phones Details on which mobile phones and external devices with a Bluetooth interface are sup‐ ported by the mobile phone preparation pack‐ age can be obtained at www.bmwusa.com/blue‐ tooth. Displaying the vehicle identification number and software part number The vehicle identification number and software part number are needed to determine which mo‐ bile phones are supported by the mobile phone preparation package. The software version of the mobile phone may also be required. 1. "Telephone" 2. "Options" Open. 3. "Bluetooth® info" 4. "Display system information" These approved mobile phones with a certain software version, support the vehicle functions described below. Malfunctions may occur with other mobile phones or software versions. Do not operate a mobile phone that is connected to the vehicle on the mobile phone keypad, as this may lead to a malfunction.
228
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Professional mobile phone preparation package
Communication
Notes At high temperatures, the charge function of the mobile phone can be limited where appropriate and the functions are no longer executed. When the mobile phone is used via the vehicle, heed the operating manual of the mobile phone.
Pairing/unpairing the mobile phone General information The following functions are available: ▷ Use of a mobile phone as a telephone. ▷ Use of a mobile phone as an additional tele‐
phone.
▷ Use of a mobile phone as an audio source. ▷ Use of an audio device as an audio source,
refer to page 214.
Requirements ▷ The mobile phone is suitable. ▷ The mobile phone is ready for operation. ▷ Bluetooth is activated in the vehicle and on
the mobile phone.
▷ Bluetooth presettings may need to be made on the mobile phone, e.g., for a connection without confirmation or visibility, refer to the mobile phone operating instructions.
▷ Deactivate Bluetooth audio if necessary. ▷ A number with at least four and a maximum
of 16 digits was defined as the Bluetooth passkey. It is only required once for pairing.
▷ The ignition is switched on. Activating/deactivating Bluetooth Bluetooth is not permitted everywhere. Comply with all safety guidelines and regulations. 1. "Telephone" 2. "Options" Open. 3. "Bluetooth®"
Additional functions Activating/deactivating the additional functions Activate the functions before pairing to be able to use them in the vehicle. Information on suit‐ able mobile phones that support this function, refer to page 228. 1. "Telephone" 2. "Bluetooth® (phone)" 3. "Options" Open. 4. "Configure Bluetooth®" 5. Select the desired additional function.
▷ "Additional telephone" ▷ "Office" ▷ "Bluetooth® audio"
6. "OK" As long as an additional function is deactivated, it cannot be assigned to a telephone. Additional telephone A mobile phone can be used as an additional telephone. The additional telephone can be used to accept incoming calls, refer to page 232. While a call is active on the additional telephone, incoming calls are displayed on the Control Display. Audio source A mobile phone can be used as an audio source. Pairing and connecting cell phone
Pairing the mobile phone To avoid becoming distracted and posing an unnecessary hazard both to your own vehi‐ cle's occupants and to other road users, only pair the mobile phone while the vehicle is sta‐ tionary.◀ 1. "Telephone" 2. "Bluetooth® (phone)"
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
229
Communication
Professional mobile phone preparation package
3. "Add new phone"
The Bluetooth name of the vehicle is dis‐ played.
4. To perform additional steps on the mobile phone, refer to the mobile phone operating instructions: e.g. search for or connect the Bluetooth device or a new device. The Bluetooth name of the vehicle appears on the mobile phone display.
5. Select the Bluetooth name of the vehicle on
the mobile phone display. Prompt via iDrive or the mobile phone to en‐ ter the same Bluetooth passkey. 6. Enter the passkey and confirm.
7. Select the functions for which the mobile
phone is to be used.
8. "OK" If the pairing was successful, the mobile phone appears at the top of the list of mobile phones. The functions supported by the mobile phone and audio device are displayed as symbols when paired. White symbol: the function is active. Gray symbol: the function is inactive. Symbol
Function Telephone. Additional telephone. Audio source.
230
Four mobile phones can be paired with the ve‐ hicle at once. Three mobile phones can be con‐ nected with the vehicle at once. If pairing was unsuccessful: What to do if..., refer to page 231. Following the initial pairing ▷ The mobile phone is detected/connected in
the vehicle within a short period of time when the engine is running or the ignition is switched on.
▷ The phone book entries of the telephone
stored on the SIM card or mobile phone are transmitted to the vehicle after detection, depending on the mobile phone.
▷ Four mobile phones can be paired. ▷ Specific settings may be necessary in some mobile phones, e.g., authorization or a se‐ cure connection; refer to the mobile phone operating instructions.
Connecting a particular mobile phone If more than one mobile phone is detected by the vehicle, the mobile phone at the top of the list is connected. If a different detected cell phone is connected with the vehicle. A different mobile phone can be connected by selecting it. 1. "Telephone" 2. "Bluetooth® (phone)" 3. Select the mobile phone that is to be con‐
nected.
The functions assigned to the mobile phone be‐ fore unpairing are assigned to the mobile phone when it is reconnected. If the mobile phone is already connected, these functions are deacti‐ vated. Configuring cell phone Additional functions can be activated or deacti‐ vated for paired and connected mobile phones. 1. "Telephone" 2. "Bluetooth® (phone)"
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Professional mobile phone preparation package
Communication
3. Highlight the mobile phone to be config‐
ured.
4. "Options" Open. 5. "Configure phone" 6. At least one function must be selected.
▷ "Telephone" ▷ "Additional telephone" ▷ "Audio"
7. "OK" If a function is assigned to a mobile phone, the function will be deactivated where appropriate for a mobile phone that is already connected and the mobile phone will be unpaired. Swapping the telephone and additional telephone The function of the telephone and additional tel‐ ephone can be swapped automatically. 1. "Telephone" 2. "Bluetooth® (phone)" 3. "Swap phone/addit. phone" Unpairing the mobile phone 1. "Telephone" 2. "Bluetooth® (phone)" 3. Highlight the mobile phone that is to be un‐
paired.
4. "Options" Open. 5. "Remove phone from list" What to do if... Information on suitable mobile phones, refer to page 228. The mobile phone could not be paired or con‐ nected. ▷ Is Bluetooth activated in the vehicle and on the mobile phone? Activate Bluetooth in the vehicle and on the mobile phone.
▷ Do the Bluetooth passkeys on the mobile phone and the vehicle match? Enter the
same passkey on the mobile phone and via iDrive.
▷ Did it take longer than 30 seconds to enter the passkey? Repeat the pairing procedure. ▷ Are too many Bluetooth devices connected to the mobile phone or vehicle? Delete con‐ nections with other devices if necessary. ▷ Is the audio connection activated? Deacti‐
vate the audio connection.
▷ Is the mobile phone in power-save mode or does it have only a limited remaining battery life? Charge the mobile phone in the snap- in adapter or via the charging cable.
▷ Depending on the mobile phone, it is possi‐
ble that only one cell phone can be con‐ nected to the vehicle. Unpair the connected cell phone from the vehicle and pair and con‐ nect only one cell phone.
The mobile phone no longer reacts. ▷ Switch the mobile phone off and on again. ▷ Ambient temperatures too high or too low? Do not subject the mobile phone to extreme ambient temperatures.
The telephone functions are not available. ▷ Is the mobile phone paired as an additional telephone and is the additional telephone function deactivated? Activate the function.
▷ Is an outgoing call not possible? Connect
the mobile phone as a telephone.
No or not all phone book entries are displayed, or they are incomplete. ▷ Transmission of the phone book entries is
not yet complete.
▷ It is possible that only the phone book en‐ tries of the mobile phone or the SIM card are transmitted.
▷ It may not be possible to display phone book
entries with special characters.
▷ The number of phone book entries being
stored is too high.
▷ Is the data volume of the contact too large,
e.g., due to stored information such as
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
231
Communication
Professional mobile phone preparation package
notes? Reduce the data volume of the con‐ tact.
▷ Is the mobile phone connected as an audio source or additional telephone? The mobile phone must be connected as a telephone.
The phone connection quality is poor. ▷ The strength of the Bluetooth signal on the mobile phone can be adjusted, depending on the mobile phone.
▷ Insert the mobile phone into the snap-in
adapter or place it in the area of the center console.
▷ Adjust the volume of the microphone and
loudspeakers separately.
If all points in this list have been checked and the required function is still not available, contact the hotline or service center.
Controls Adjusting the volume Turn the knob until the desired volume is se‐ lected. The setting is stored for the remote con‐ trol currently in use. The vehicle automatically adjusts the volume of the microphone on the telephone and the vol‐ ume of the called party. Depending on the mo‐ bile phone, the volumes may need to be ad‐ justed. The settings can only be created during a call and must be adjusted separately for each telephone. The settings are deleted when the telephone is unpaired. 1. "Settings" 2. "Tone" 3. "Volume settings" 4. Select the desired setting: "Microphone" or
"Loudspeak."
5. To adjust: turn the controller. 6. To store: press the controller.
Incoming call Receiving calls If the number of the caller is stored in the phone book and is transmitted by the network, the name of the contact is displayed. Otherwise, only the phone number is displayed. If more than one phone number is assigned to a contact, only the name of the contact is dis‐ played. For calls on the additional telephone, the num‐ ber is only displayed if it is transmitted by the network. An incoming call to the additional telephone is automatically rejected if there is an active call on the other telephone. Accepting a call Via iDrive
"Accept"
Via the button on the steering wheel
Press the button.
Via the instrument cluster "Accept" Rejecting a call Via iDrive "Reject"
232
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Professional mobile phone preparation package
Communication
3. Select the digits individually.
Via the instrument cluster "Reject" Ending a call Via iDrive
"End call"
4. Convert to letters as required.
Select the symbol.
Select the letters individually.
5.
Select the symbol.
Select symbol to convert to numbers.
Phone numbers can also be entered by voice. Only numbers can be spoken. Letter/number assignment
Via the button on the steering wheel
Press the button.
Via the instrument cluster "End call" Entering a phone number Dialing a number When entering phone numbers, you can switch between entering letters and numbers. Service numbers can be entered more easily, e. g. 1-888-BMW-CARD. 1. "Telephone" 2. "Dial number"
Letter ABC DEF GHI JKL MNO PQRS TUV WXYZ
Number
Calls with multiple parties General information You can switch between calls or connect two calls to a single conference call. These functions must be supported by the mobile phone and service provider.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
233
Communication
Professional mobile phone preparation package
Accepting a call while speaking to another party This function might have to be activated by the service provider and the mobile phone must be adjusted accordingly. If a second call comes in during an ongoing call, a call waiting signal sounds where appropriate.
"Accept"
The call is accepted and the existing call is put on hold. Establishing a second call Establish an additional call during an active call. 1. "Telephone" 2. "Active calls" 3.
"Hold"
The existing call is put on hold.
4. Dial the new phone number or select it from
a list.
Switching between two calls, hold call The active call is displayed in color. The call on hold is displayed in gray.
"Swap calls"
The call on hold is resumed. Establishing a conference call Two calls can be connected to a single tele‐ phone conference call. 1. Establish two calls. 2.
"Conference call"
"Microphone mute"
When terminating a conference call, both calls are ended. If one call is terminated by another party, the other call can be continued. Switching the microphone to mute When a call is active, the microphone can be muted. 1. "Telephone" 2. "Active calls" 3. A microphone that has been switched to mute is automatically reactivated: ▷ When a new connection is established. ▷ When switching between call parties. DTMF suffix dialing DTMF suffix dialing can be used for gaining ac‐ cess to network services or for controlling devi‐ ces, e.g., to make a remote inquiry of an answer‐ ing machine. The DTMF code is needed for this purpose. 1. "Telephone" 2. Select the contact from a list or "Dial
number". "Keypad dialing"
3. 4. Enter the DTMF code via iDrive. Phone book Displays The phone book accesses the contacts and shows all contacts for which a phone number has been stored. The entries can be selected to make a call. 1. "Telephone" 2. "Phone book" A symbol indicates the storage location of the contacts.
234
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Professional mobile phone preparation package
Communication
Calling a contact
Symbol Meaning
Contact with one stored phone num‐ ber. Contact with more than one stored phone number. Call not possible; mobile phone with‐ out reception or network, or Service Request is active.
For contacts with one stored phone number: se‐ lect the required contact. The connection is es‐ tablished. For contacts with more than one stored phone number: select the required contact and the phone number. The connection is established. Editing a contact Changing the entries in "Contacts". When a contact is changed, the changes are not stored on the mobile phone. A copy of the entry is stored in the vehicle. 1. Highlight the contact. 2. Open "Options". 3. "Edit entry" The contact can be edited.
Redialing General information The list of dialed numbers in the mobile phone is transmitted to the vehicle depending on the mobile phone. The 20 phone numbers dialed last are displayed. The sorting order of the phone numbers depends on the particular mo‐ bile phone. Dialing the number via the instrument cluster This is possible when there is no active call.
1.
wheel.
Press the button on the steering
2. Select the desired phone number. The connection is established. Dialing a number via iDrive 1. "Telephone" 2. "Redial" 3. Select the desired entry and the phone num‐
ber if necessary.
The connection is established. Deleting a single entry or all entries The erasure of entries depends on the mobile phone. 1. Highlight the entry. 2. "Options" Open. 3. "Delete entry" or"Delete list" Saving an entry in the contacts 1. Highlight the entry. 2. "Options" Open. 3. "Store as new contact" or "Add to existing
contact"
4. Select the contact, if necessary. 5. Select the type of number: "Home",
"Business", "Mobile" or "Other"
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
235
Communication
Professional mobile phone preparation package
6. Complete the entries if necessary. 7. "Store contact" Received calls Displaying calls The 20 calls that were last received are dis‐ played. 1. "Telephone" 2. "Received calls"
Calling a number from the list Selecting an entry. The connection is established. Deleting a single entry or all entries The erasure of entries depends on the mobile phone. 1. Highlight the entry. 2. "Options" Open. 3. "Delete entry" or"Delete list" Saving an entry in the contacts 1. Highlight the entry. 2. "Options" Open. 3. "Store as new contact" or "Add to existing
contact"
4. Select the contact, if necessary. 5. Select the type of number: "Home",
"Business", "Mobile" or "Other"
6. Complete the entries if necessary. 7. "Store contact"
Hands-free system General information Calls that are being made on the hands-free system can be continued on the mobile phone and vice versa. From the mobile phone to the hands- free system Calls that were begun outside of the Bluetooth range of the vehicle can be continued on the hands-free system with the ignition switched on. Depending on the mobile phone, the system au‐ tomatically switches to the hands-free system. If the system does not switch over automatically, follow the instructions on the mobile phone dis‐ play; refer also to the mobile phone operating instructions. From the hands-free system to the mobile phone Calls that are made on the hands-free system can in some cases be continued on the mobile phone; this depends on the mobile phone. Follow the instructions on the mobile phone dis‐ play; refer also to the mobile phone operating instructions.
Snap-in adapter General information Detailed information about snap-in adapter, which supports the functions of the mobile phone, available from the service center. Notes At high temperatures, the charge function of the mobile phone can be limited where appropriate and the functions are no longer executed. When the mobile phone is used via the vehicle, heed the operating manual of the mobile phone.
236
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Professional mobile phone preparation package
Communication
Installation position In the center armrest. Inserting the snap-in adapter 1. Press the button and remove the cover.
nections, arrow 1, and push downward, ar‐ row 2 until it engages.
Removing the mobile phone
2.
Insert the snap-in adapter at the front, ar‐ row 1, and press down, arrow 2, until it en‐ gages.
Press the button and remove the mobile phone.
Inserting the mobile phone 1. Depending on the mobile phone, remove the protective cap from the antenna con‐ nector and from the USB connection of the mobile phone.
2. Slide the mobile phone with the buttons fac‐ ing up in the direction of the electrical con‐
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
237
Communication
Office
Office Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
At a glance General information Contacts, appointments, tasks, notes, text mes‐ sages, and e-mails from the mobile phone can be displayed on the Control Display if the mobile phone provides compatible support of these functions and the necessary Bluetooth stand‐ ards. Information about which mobile phones support Office functions can be found at www.bmwusa.com/bluetooth. A limited number of compatible mobile phones is available for Of‐ fice. Contents are only displayed in full length when the vehicle is stationary. The mobile phone has read-access only.
Do not use Office while driving To avoid becoming distracted and posing an unnecessary hazard to your vehicle's occu‐ pants and to other road users, never attempt to use the controls or enter information unless traf‐ fic and road conditions allow this.◀
Requirements ▷ A suitable mobile phone is paired with the
vehicle and connected. In some mobile phones, data access must be confirmed on the mobile phone.
▷ The time, time zone, and date, refer to
page 83, are correctly set on the Control Display and on the mobile phone to correctly display appointments, for example.
▷ Office is activated, refer to page 229. Updating Data are updated every time the mobile phone is connected to the vehicle. Appointment en‐ tries, tasks, notes and reminders can be updated separately. 1. "Office" 2. "Current office", "Calendar", "Tasks",
"Notes" or "Reminders"
3. "Options" Open. 4. "Update data"
Cell phone data are transmitted again to the vehicle.
Office information The number of unread messages and active tasks as well as the upcoming appointments are displayed. 1. "Office" 2. "Current office" 3. Select the desired entry to display details.
238
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Contacts Note If equipped with Professional mobile phone preparation package. At a glance Contacts can be created and edited. The con‐ tacts from the mobile phone are displayed as well if this function is supported by the mobile phone. The phone numbers can be selected. Contacts can be created and edited. The con‐ tacts from the mobile phone are displayed as well if this function is supported by the mobile phone. Addresses can be adopted as destina‐ tions for navigation and the phone numbers can be dialed. Displaying contacts General information 1. "Office" 2. "Contacts"
All contacts are listed in alphabetical order. De‐ pending on the number of contacts, an A-Z search is offered, refer to page 22. A symbol indicates the storage location of the contacts:
Office
Communication
Symbol No symbol
Storage location In the vehicle; the address has not been checked as a destination. In the vehicle; the address has been checked as a destination. Mobile phone.
Dialing phone numbers 1. Select the desired contact. 2. Select the phone number.
The connection is established.
Editing a contact 1. Select the desired contact. 2. "Edit contact"
3. Change the entries. 4. "Store contact in vehicle" When a contact is edited, the changes are not stored on the mobile phone. A copy of the entry is stored in the vehicle. Selecting the contact as a navigation destination 1. Select the desired contact. 2. Select the address.
When contacts from the mobile phone are used, the address may need to be matched to the navigation data contained in the vehi‐ cle. In this case: Correct the address.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
239
Communication
Office
3. "Start guidance" or "Add as another
destination"
Checking the address as a destination An address that is to be used for destination guidance must match the navigation data con‐ tained in the vehicle. The address can be checked for this purpose. 1. Select the desired contact and highlight the
address.
2. Open "Options". 3. "Check as destination" 4. Correct and store the address if necessary. If the address is corrected and stored, a copy of it is stored in the vehicle. The address is not changed on the mobile phone. New contact General information A contact can have up to 8 phone numbers, 2 addresses, 3 e-mail addresses and one Inter‐ net address. 1. "Office" 2. "Contacts" 3. "Options" Open. 4. "New contact"
5. The entry fields are still filled with the previ‐
ous entries: "Delete input fields"
6. Fill in the entry fields: select the symbol next
to the entry field.
7. Enter the text and assign the contact type.
8.
In the navigation system: enter address. Only addresses contained in the navigation data in the vehicle can be entered. This en‐ sures that destination guidance is possible for all addresses. If necessary, "Accept address".
9. "Store contact in vehicle" Contact types Various contact types can be assigned to phone numbers and addresses. Symbol
Meaning Home phone number. Business phone number. Mobile phone number. Other phone number. Home address. Business address.
Specifying the home address A home address can be stored. It appears at the top of the contact list. 1. "Home" 2. Create a contact. 3. "Store contact in vehicle" Selecting the sorting order of the names Names can be displayed in a different order. 1. "Office" 2. "Contacts" 3. Open "Options". 4. "Display: last, first name" or "Display: first,
last name"
Depending on how the contacts were stored on the mobile phone, the sorting order of the names may differ from the selected sorting order.
240
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Show contact pictures Pictures stored with the contacts are stored in the vehicle when the mobile phone is connected to the vehicle. The number of transmitted pic‐ tures depends on the mobile phone. The mobile phone must support this function. 1. "Office" 2. "Contacts" 3. "Options" Open. 4. "Configure Bluetooth®" 5. "Show images" Display of all contact pictures is activated or de‐ activated. Exporting/importing contacts Contacts can be exported and imported via the Personal Profile, refer to page 31. The contacts stored in the vehicle are exported, but not those from the mobile phone. Deleting contacts Only contacts that are stored in the vehicle are deleted. The contacts on the mobile phone can‐ not be deleted. 1. "Office" 2. "Contacts" 3. Highlight the contact. 4. Open "Options". 5. "Delete contact"or "Delete all contacts". 6.
If necessary "Yes"
Messages General information Whether or not text messages and e-mails from the mobile phone are displayed depends on whether transmission from the mobile phone to the vehicle is supported. Text messages and e- mails may not be supported by the service pro‐ vider, or the function may need to be enabled
Office
Communication
separately. After the mobile phone is first paired, transmission may take several minutes. Mes‐ sages are only displayed in full length when the vehicle is stationary. Messages from the addi‐ tional telephone are not transmitted. Displaying messages 1. "Office" 2. "Messages" A symbol identifies the type of message. Symbol Message type Text messages. My Info Message from the Concierge serv‐ ice. Message from BMW Info. E-mail from mobile phone.
Filtering the message list The message list can be filtered when more than one type of message exists. 1. "Filter:"
2. Select the type of message.
▷ "All"
All messages are displayed.
▷ "E-mail"
Only e-mails from the mobile phone are displayed.
▷ "Service message"
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
241
Communication
Office
Only messages from the BMW Assist Concierge service, My Info and BMW Info are displayed.
▷ "Text message"
Only text messages from the mobile phone are displayed.
Deleting messages Messages from the Concierge service, My Info, and BMW Info can be deleted. Delete a message: 1. "Office" 2. "Messages" 3. Select the desired message. 4. "Options" Open. 5. "Delete message" Delete all messages: 1. "Office" 2. "Messages" 3. "Options" Open. 4. "Delete all messages" Text messages Calling the sender of a text message 1. Select the desired message. 2. Saving the sender in the contacts 1. Highlight the desired message. 2. Open "Options". 3. "Store as new contact" or "Add to existing
Select the symbol.
contact"
Using contact data Contact data from appointments, tasks, text messages, e-mails and notes can be saved or selected, refer to page 245.
Reading the text message out loud Read the text message out loud, refer to page 245. My Info Selecting additional functions Additional functions are available when a mes‐ sage is selected: Symbol Function
"Start guidance" or "Add as another destination" "Call" If the message contains a number, the connection is established. "Select phone number" If the message contains more than one number, select the desired num‐ ber from the list. The connection is established.
Message from the Concierge service Storing an address 1. Select the desired message. 2. "Options" Open. 3. "Store contact in vehicle" Selecting additional functions Additional functions are available when a mes‐ sage is selected: Symbol Function
"Start guidance" or "Add as another destination" "Call" If the message contains a number, the connection is established.
242
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Symbol Function
"Select phone number" If the message contains more than one number, select the desired num‐ ber from the list. The connection is established. "Further information" Displaying additional information.
BMW Info General information Messages from BMW regarding service actions and news from BMW. Selecting additional functions The following functions are available when a message is selected: Symbol Function
"Start guidance" or "Add as another destination" "Call" If the message contains a number, the connection is established. "Select phone number" If the message contains more than one number, select the desired num‐ ber from the list. The connection is established. "Further information" Detailed information about a mes‐ sage is displayed. This does not re‐ sult in any costs.
E-mail Displaying e-mails 1. "Office" 2. "Messages"
Office
Communication
3. Select the desired e-mail. Displaying e-mail contacts If the sender and recipient of an e-mail are trans‐ mitted by the mobile phone, this information is displayed in the e-mail. "Sender/Recipient"
If the e-mail addresses are stored in the con‐ tacts, the contact is displayed. Select the con‐ tact to display details. If the e-mail addresses are not stored in the con‐ tacts, only the e-mail address is displayed. Using contact data Contact data from appointments, tasks, text messages, e-mails and notes can be saved or selected, refer to page 245. Deactivating the full display When an e-mail is opened in the vehicle, the e- mail is fully transmitted to the vehicle. This may result in charges. 1. "Office" 2. "Messages" 3. "Options" Open. 4. "Fully download e-mails"
Only a part of the email from the cell phone is loaded into the vehicle.
Reading the e-mail out loud Read the e-mail out loud, refer to page 245.
Calendar Display the calendar Appointments during the last 20 and the next 50
days can be displayed. 1. "Office" 2. "Calendar"Online Edition for Part no. 01 40 2 608 633 - 11 09 490
243
Communication
Office
The appointments on the current day are displayed.
Selecting the calendar day 1. Select the date.
2. Select the desired day or date.
▷ "Next day" ▷ "Date:" ▷ "Previous day" ▷ "Today"
Display the appointment 1. Select the desired appointment. 2. Scroll through the appointment if neces‐
sary: ▷ Turn the controller. ▷
Select the symbol.
Using contact data Contact data from appointments, tasks, text messages, e-mails and notes can be saved or selected, refer to page 245. Reading the appointment out loud Read the appointment out loud, refer to page 245.
Tasks Displaying the task list Display tasks that are due within the next 90 days. 1. "Office" 2. "Tasks" Sorting the task list 1. Select the header in the task list.
2. Select the sorting criterion:
▷ "Priority (!)" ▷ "Subject" ▷ "Due date"
Displaying the task 1. Select the desired task. 2. Scroll in the task if necessary:
▷ Turn the controller. ▷
Select the symbol.
Using contact data Contact data from appointments, tasks, text messages, e-mails and notes can be saved or selected, refer to page 245. Reading the task out loud Read the task out loud, refer to page 245.
244
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Notes Displaying notes 1. "Office" 2. "Notes"
All notes are displayed.
Displaying the note 1. Select the desired note.
2. Scroll in the note if necessary:
▷ Turn the controller. ▷
Select the symbol.
Using contact data Contact data from appointments, tasks, text messages, e-mails and notes can be saved or selected, refer to page 245. Reading the note out loud Read the note out loud, refer to page 245.
Reminders Displaying reminders Reminders of pending appointments and tasks are displayed. After an appointment or after a task is due, the reminder is no longer displayed. 1. "Office" 2. "Reminders" 3. Select the desired reminder.
Office
Communication
The corresponding appointment or the task are displayed.
Using contact data At a glance Contact data from appointments, tasks, text messages, emails and notes can be stored or selected. Displaying contact or selecting phone number 1. 2. Display the contact or select the phone
"Use contact data"
number: ▷ Select the contact to display contact de‐
tails.
▷ Select the phone number to establish a
connection directly.
Storing contact data "Use contact data" 1. 2. Highlight the phone number or e-mail ad‐
dress.
3. "Options" Open. 4. "Add to existing contact" or "Store as new
contact"
Reading out loud Text messages, e-mails, appointment entries, tasks, and notes can be read out loud. 1. Select the desired message, appointment,
task, or note.
Select the symbol.
2. The following options are available during read‐ ing: ▷
"Pause" Interrupt reading. Select again to restart reading.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
245
▷ Text were already transmitted from the mo‐
bile phone in a shortened form.
▷ Synchronization between the mobile phone
and vehicle may take several minutes.
The contact pictures are not being displayed? ▷ Up to 200 contact pictures can be stored in
the vehicle.
The E-mail is displayed with a delay? ▷ Check the e-mail settings on the mobile
phone and adjust if necessary.
If all points in this list have been checked and the required function is still not available, contact the hotline or service center.
Communication
Office
▷
▷
▷
"Back to beginning"
Start reading message again from the be‐ ginning.
Select the symbol.
Skip a paragraph.
Select the symbol.
Go back one paragraph.
▷ To end reading, tilt the controller to the left.
What to do if... Information on suitable mobile phones, refer to page 228. Appointments, tasks, notes, text messages, or e-mails from the mobile phone are not dis‐ played. ▷ The mobile phone is not capable of the
missing function or is not connected cor‐ rectly.
▷ The Office function is deactivated. ▷ The mobile phone is connected as an addi‐
tional phone.
▷ Appointments are older than 20 days or are
more than 50 days in the future.
▷ The tasks have been marked as completed
or have a due date that lies more than 90 days in the future.
▷ Depending on the number of stored ap‐ pointments, task notes, and messages in the mobile phone, not all are displayed in the vehicle.
Not all appointments and tasks from the mobile phone are displayed at the right time? ▷ The time zone, time or date is incorrectly set
on the Control Display and mobile phone.
The e-mail attachment is not displayed. ▷ E-mails are transmitted without an attach‐
ment.
Entries are not displayed in full length.
246
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Contacts Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for
