Login- Download PDF Manual
-
15 seconds between attempts. Canada: if programming with the hand-held transmitter was interrupted, hold down the interior rearview mirror button and repeat‐ edly press and release the hand-held trans‐ mitter button for 2 seconds.
Controls
Before operation Before operating a system using the
integrated universal remote control, ensure that there are no people, animals, or objects within the range of movement of the remote-controlled system; otherwise, there is a risk of injury or damage. Also follow the safety instructions of the hand- held transmitter.◀ The system, such as the garage door, can be operated using the button on the interior rear‐ view mirror while the engine is running or when the ignition is started. To do this, hold down the button within receiving range of the system until the function is activated. The interior rearview mirror LED stays lit while the wireless signal is being transmitted. Deleting stored functions Press and hold the left and right button on the interior rearview mirror simultaneously for ap‐ proximately 20 seconds until the LED flashes rapidly. All stored functions are deleted. The functions cannot be deleted individually.
Interior equipment
Controls
Digital compass At a glance
1 Control button 2 Mirror display
Mirror display The point of the compass is displayed in the mirror when driving straight. Operating concept Various functions can be called up by pressing the control button with a pointed object, such as the tip of a ballpoint pen or similar object. The following setting options are displayed in suc‐ cession, depending on how long the control but‐ ton is pressed: ▷ Pressed briefly: turns display on/off. ▷ 3 to 6 seconds: compass zone setting. ▷ 6 to 9 seconds: compass calibration. ▷ 9 to 12 seconds: left/right-hand steering
setting.
▷ 12 to 15 seconds: language setting. Setting the compass zones Sets the particular compass zones on the vehi‐ cle so that the compass operates correctly; refer to World map with compass zones.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
143
Controls
Interior equipment
World map with compass zones
Procedure 1. Press and hold the control button for approx. 3 to 4 seconds. The number of the set com‐ pass zone appears in the mirror.
2. To change the zone setting, press the con‐ trol button quickly and repeatedly until the number of the compass zone corresponding to your location appears in the mirror.
The set zone is stored automatically. The com‐ pass is ready for use again after approximately 10 seconds. Calibrating the digital compass The digital compass must be calibrated in the event of the following: ▷ The wrong point of the compass is dis‐
played.
▷ The point of the compass displayed does not change despite changing the direction of travel.
▷ Not all points of the compass are displayed.
Procedure 1. Make sure that there are no large metallic
objects or overhead power lines near the ve‐ hicle and that there is sufficient room to drive around in a circle.
2. Set the currently applicable compass zone. 3. Press and hold the control button for approx. 6 to 7 seconds so that "C" appears on the display. Next, drive in a complete circle at least once at a speed of no more than 4 mph/ 7 km/h. If calibration is successful, the "C" is replaced by the points of the compass.
Left/right-hand steering The digital compass is already set for right or left-hand steering at the factory. Setting the language Press and hold the control button for approx. 12
to 13 seconds. Briefly press the control button again to switch between English "E" and Ger‐ man "O".144
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Interior equipment
Controls
Push in the lighter. The lighter can be removed as soon as it pops back out.
Connecting electrical devices Sockets The lighter socket can be used as a socket for electrical equipment while the engine is running or when the ignition is switched on. The total load of all sockets must not exceed 140 watts at 12 volts. Do not damage the socket by using unsuitable connectors. Front center console
The setting is stored automatically after approx‐ imately 10 seconds.
Ashtray/cigarette lighter Ashtray Opening
Raise cover.
Emptying Take out the insert. Lighter
Danger of burns Only hold the hot lighter by its knob; oth‐ erwise, there is the danger of getting burned. Switch off the ignition and take the remote con‐ trol with you when leaving the vehicle so that children cannot use the lighter and burn them‐ selves.◀
Raise the cap and remove the cover or cigarette lighter.
In the front passenger footwell
The lighter is located next to the ashtray.
Socket is located below the glove compartment.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
145
Locking the backrest Before carrying persons in the rear, en‐
gage and thereby lock the backrests, or the re‐ straining effect of the safety belts during an ac‐ cident may be limited.◀
Retract the head restraints if necessary before backrests are folded down
With folding head restraints, fold in the head re‐ straints before folding down the backrests, or damage may result.◀
Opening 1. Unlock the belt lock of the center safety belt
in the rear using the latch plate of another safety belt. Insert the latch plate at the end of the belt into the specially designated fixture on the rear window shelf.
2.
3. Push the corresponding head restraint
down as far as it will go.
Controls
Interior equipment
Rear center console
Remove cover.
In the cargo area
The socket is located on the left side in the cargo area.
Through-loading system General information The cargo area can be enlarged by folding down the rear seat backrest. The rear seat backrest is divided at a ratio of 40– 20–40.
Danger of pinching Before folding down the rear seat backr‐ ests, ensure that the area of movement of the backrests is clear. In particular, ensure that no one is located in the area of movement and that no one reaches into the area of movement of the rear seat backrests when the middle section is folded down. Otherwise, injury or damage may result.◀
146
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
4. Pull the corresponding lever in the cargo
area to release the rear seat backrest.
Interior equipment
Controls
Folding down the middle section 1. Fold in the middle head restraint. 2. Reach into the recess and pull the middle
section forward.
5. The unlocked rear seat backrest moves for‐ ward slightly. Fold the backrest forward by the head restraint.
Closing 1. Return the rear seat backrest to the upright
seating position and engage it.
Ensure that the lock is securely en‐ gaged
When folding back the backrest, be sure that it locks in place securely. If it is not properly engaged, transported cargo could enter the passenger compartment during braking or evasive maneuvers and endanger the vehi‐ cle occupants.◀
2. Release the latch plate from the fixture on the rear window shelf and insert it into the belt lock of the center safety belt. Make sure you hear the latch plate engage.
To secure cargo, refer to page 160, with nets or draw straps, the cargo area is fitted with lashing eyes.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
147
Controls
Storage compartments
Storage compartments Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
▷ Storage compartment in the rear center
console, refer to page 150.
Glove compartment Front passenger side Opening
Notes
No loose objects in the passenger com‐ partment
Do not stow any objects in the passenger com‐ partment without securing them; otherwise, they may present a danger to occupants for in‐ stance during braking and avoidance maneu‐ vers.◀
Do not place anti-slip mats on the dash‐ board
Do not place anti-slip mats on the dashboard. The mat materials could damage the dash‐ board.◀
Storage compartments The following storage compartments are avail‐ able in the vehicle interior: ▷ Glove compartment on the front passenger
side, refer to page 148.
▷ Without Smoker's package: Front storage compartment, in front of the cupholders, re‐ fer to page 149.
▷ Storage compartment in the front center
armrest, refer to page 149.
▷ Compartments in the doors, refer to
page 149.
▷ Nets on the backrests of the front seats.
Pull the handle. The light in the glove compartment switches on. The net in the glove compartment is provided for stowing the storage tray for the cupholder, refer to page 150.
Close the glove compartment again im‐ mediately
Close the glove compartment immediately after use while driving; otherwise, injury may occur during accidents.◀
Closing Fold up the cover. Locking The glove compartment can be locked with an integrated key to separately secure the trunk lid, refer to page 38, for example. After the glove compartment is locked, the re‐ mote control can be handed over, such as at a hotel, without the integrated key, refer to page 30.
148
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
This prevents access to the glove compartment and to the cargo area. USB interface for data transfer
Connection for importing and exporting data on USB devices, e.g.: ▷ Personal Profile settings, refer to page 33. ▷ Music collection, refer to page 205. Observe the following when connecting: ▷ Do not use force when plugging the con‐
nector into the USB interface.
▷ Do not connect devices such as fans or
lamps to the USB interface.
▷ Do not connect USB hard drives. ▷ Do not use the USB interface to recharge
external devices.
Front storage compartment
Storage compartments
Controls
Compartments in the doors
Do not stow any breakable objects Do not store any breakable objects, e. g. glass bottles, in the compartments, or there is an increased risk of injury in the event of an ac‐ cident.◀
Center armrest Front A storage compartment is located in the center armrest between the front seats. Opening
Raise the center arm rest.
Repositioning Center armrest can be pushed in the longitudi‐ nal direction. It engages in the end positions.
Raise the lid to open it.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
149
Controls
Storage compartments
Connection for an external audio device
Front
This can be used to connect an external audio device, such as an MP3 player. ▷ AUX-IN port, refer to page 210. ▷ USB audio interface, refer to page 210.
Storage compartment in the rear Storage compartment is located in the rear cen‐ ter console.
Cupholders Notes
Shatter-proof containers and no hot drinks
Use light and shatter-proof containers and do not transport hot drinks. Otherwise, there is the increased danger of injury in an accident.◀
Unsuitable containers Do not forcefully push unsuitable contain‐ ers into the cupholders. This may result in dam‐ age.◀
Storage tray for front cupholders The cupholder with the storage tray can be used for additional storage. To do this, place the stor‐ age tray in the cupholder. Only use the storage tray for small objects, such as keys or the remote control. When not in use, stow the storage tray in the glove compartment net. Insert the storage tray into the net so that the top surface faces up. Note the trapezoidal shape of the net and tray. Rear In the center armrest.
Pull the center armrest forward at the strap. To open: press the button. To close: push both covers back in, one after the other.
Pushing back the covers Push back the covers before folding up the center armrest; otherwise, the cupholder could become damaged.◀
150
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Clothes hooks The clothes hooks are located in the grab han‐ dles in the rear.
Do not obstruct view When suspending clothing from the
hooks, ensure that it will not obstruct the driver's vision.◀
No heavy objects Do not hang heavy objects from the hooks;
otherwise, they may present a danger to pas‐ sengers during braking and evasive maneu‐ vers.◀
Storage compartments in the cargo area Left storage compartment A storage compartment is located on the left side. Net Small objects can be stowed in the net on the left side. Right storage compartment Located on the right side is a storage compart‐ ment for the onboard vehicle tool kit, refer to page 279, and first aid kit, refer to page 291.
Storage compartments
Controls
Hooks/multi-function hook
A multi-function hook is located on each side of the cargo area. The multi-function hooks can be loaded up to a max. of 8.8 lbs/4 kg.
Light and suitable objects only Only hang light bags or suitable objects
from the holders. Otherwise, there is a danger of objects flying about during braking and evasive maneuvers. Only transport heavy luggage in the trunk if it has been appropriately secured.◀
Retaining strap A retaining strap is available on the right side trim for fastening small objects. Lashing eyes in the cargo area To secure the cargo, refer to page 160, there are four lashing eyes in the cargo area. Floor net The floor net can also be used to Secure the load, refer to page 160, and to store small parts. Storage compartment under cargo floor panel
Maximum load To avoid damage to the vehicle, do not ex‐ ceed a maximum permitted load of 44 lbs/20 kg in the storage compartment under the cargo floor panel.◀
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
151
Controls
Storage compartments
Raise the cargo floor panel, arrow 1, and latch at top, if necessary, arrow 2.
Partitioning the compartment The compartment can be divided using an at‐ tachable partition.
152
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Storage compartments
Controls
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
153
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Driving tips
This chapter provides you with information useful in dealing with specific driving and operating modes.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Driving tips
Things to remember when driving
Things to remember when driving Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
Drive conservatively for the first 200 miles/ 300 km. Brake system Brakes require an initial break-in period of ap‐ prox. 300 miles/500 km to achieve optimized contact and wear patterns between brake pads and discs. Drive moderately during this break-in period. Following part replacement The same breaking in procedures should be ob‐ served if any of the components mentioned above have to be renewed in the course of the vehicle's operating life.
General driving notes Closing the trunk lid
Drive with the trunk lid closed Only drive with the tailgate closed; other‐ wise, in the event of an accident or braking or evasive maneuvers, passengers or other road users may be injured or the vehicle may be dam‐ aged. In addition, exhaust fumes may enter the passenger compartment.◀ If driving with the tailgate open cannot be avoided: ▷ Close all windows and the glass sunroof. ▷ Greatly increase the blower speed. ▷ Drive moderately. Hot exhaust system Hot exhaust system High temperatures are generated in the
exhaust system.
Breaking-in period General information Moving parts need to be broken in to adjust to each other. The following instructions will help achieve a long vehicle life and good economy. Engine and differential Always obey the official speed limit. Up to 1,200 miles/2,000 km Do not exceed the maximum engine and road speed: ▷ For gasoline engine, 4,500 rpm and
100 mph/160 km/h.
Avoid full-throttle operation and use of the transmission's kickdown mode for the initial miles. From 1,200 miles/2,000 km The engine and vehicle speed can gradually be increased. Tires Due to technical factors associated with their manufacture, tires do not achieve their full trac‐ tion potential until after an initial breaking-in pe‐ riod.
156
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Things to remember when driving
Driving tips
Do not remove the heat shields installed and never apply undercoating to them. When driv‐ ing, standing at idle and while parking, take care to avoid possible contact between the hot ex‐ haust system and any highly flammable materi‐ als such as hay, leaves, grass, etc. Such contact could lead to a fire, and with it the risk of serious personal injury as well as property damage. Do not touch hot exhaust pipes; otherwise, there is the danger of getting burned.◀
Mobile communication devices in the vehicle
Mobile communication devices in the ve‐ hicle
It is advised that you do not use mobile commu‐ nication devices, e.g., mobile phones, inside the vehicle without connecting them directly to the external antenna. Otherwise, the vehicle elec‐ tronics and mobile communication devices can interfere with each other. In addition, there is no assurance that the radiation generated during transmission will be discharged from the vehicle interior.◀
Hydroplaning On wet or slushy roads, a wedge of water can form between the tires and road surface. This phenomenon is referred to as hydroplan‐ ing. It is characterized by a partial or complete loss of contact between the tires and the road surface, ultimately undermining your ability to steer and brake the vehicle.
Hydroplaning When driving on wet or slushy roads, re‐
duce your speed to prevent hydroplaning.◀
Driving through water Drive though calm water only if it is not deeper than 9.8 inches/25 cm and at this height, no faster than walking speed, up to 6 mph/10 km/h.
Adhere to water depth and speed limita‐ tions
Do not exceed this water depth and walking speed; otherwise, the vehicle's engine, the elec‐ trical systems and the transmission may be damaged.◀
Braking safely Your vehicle is equipped with ABS as a standard feature. Applying the brakes fully is the most effective way of braking in situations when this is neces‐ sary. The vehicle maintains steering responsiveness. You can still avoid any obstacles with a minimum of steering effort. Pulsation of the brake pedal and sounds from the hydraulic circuits indicate that ABS is in its active mode. Objects in the area around the pedals No objects in the area around the pedals Keep floor mats, carpets, and any other objects out of the area of motion of the pedals; otherwise, the function of the pedals could be impeded while driving Do not place additional floor mats over existing mats or other objects. Only use floor mats that have been approved for the vehicle and can be properly fixed in place. Ensure that the floor mats are securely fastened again after they were removed for cleaning, for example.◀
Driving in wet conditions When roads are wet or there is heavy rain, briefly exert gentle pressure on the brake pedal every few miles. Ensure that this action does not endanger other road users. The heat generated in this process helps dry the brake discs and pads.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
157
Driving tips
Things to remember when driving
Therefore, traces of condensed water under the vehicle are normal.
In this way braking efficiency will be available when you need it. Hills Drive long or steep downhill gradients in the gear in which the least braking is required. Otherwise, the brake system may overheat, resulting in a reduction in the brake system efficiency. Automatic transmission: You can increase the engine's braking effect by shifting down in the manual mode of the auto‐ matic transmission.
Avoid load on the brakes Avoid placing excessive load on the brake system. Light but consistent brake pressure can lead to high temperatures, brake wear and pos‐ sibly even brake failure.◀
Do not drive in neutral Do not drive in neutral or with the engine stopped, as doing so disables engine braking. In addition, steering and brake assist is unavailable with the engine stopped.◀
Brake disc corrosion Corrosion on the brake discs and contamination on the brake pads are furthered by: ▷ Low mileage. ▷ Extended periods when the vehicle is not
used at all.
▷ Infrequent use of the brakes. Corrosion occurs when the minimum pressure that must be exerted by the pads during brake applications to clean the discs is not reached. Should corrosion form on the brake discs, the brakes will tend to respond with a pulsating ef‐ fect that generally cannot be corrected. Condensation under the parked vehicle When using the automatic climate control, con‐ densation water develops that exits underneath the vehicle.
158
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Loading Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
General information Overloading the vehicle To avoid exceeding the approved carrying capacity of the tires, never overload the vehicle. Overloading can lead to overheating and in‐ creases the rate at which damage develops in‐ side the tires. This could result in a sudden loss of tire inflation pressure.◀ No fluids in the trunk Make sure that fluids do not leak into the trunk; otherwise, the vehicle may be damaged.◀
Determining the load limit
Loading
Driving tips
hicle and unstable driving situations may result.
2. Determine the combined weight of the
driver and passengers that will be riding in your vehicle.
3. Subtract the combined weight of the driver and passengers from XXX kilograms or YYY pounds.
4. The resulting figure equals the available
amount of cargo and luggage load capacity. For example, if the YYY amount equals 1,000 lbs and there will be four 150 lbs pas‐ sengers in your vehicle, the amount of avail‐ able cargo and luggage load capacity is 400 lbs: 1,000 lbs minus 600 lbs = 400 lbs. 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
Load
The maximum load is the sum of the weight of the occupants and the cargo. The greater the weight of the occupants, the less cargo that can be transported.
1. Locate the following statement on your ve‐
hicle’s placard: ▷ The combined weight of occupants and
cargo should never exceed XXX kg or YYY lbs. Otherwise, damage to the ve‐
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
159
Driving tips
Loading
Stowing cargo
Floor net The floor net can also be used to Secure the load and to store small parts.
▷ Heavy cargo: stow as far forward and as low as possible, ideally directly behind the cargo area separating wall.
▷ Very heavy cargo: when the rear seat is not occupied, secure each of the outer safety belts in the opposite buckle.
▷ Cover sharp edges and corners. ▷ If necessary, fold down the rear backrests to
stow cargo.
▷ Do not stack cargo above the top edge of the
backrests.
▷ Place protective material around any sharp- edged or pointed objects that could bump against the rear window while the vehicle is in motion.
Securing cargo Lashing eyes in the cargo area
To secure the cargo, there are four lashing eyes in the cargo area
Hook the floor net into the fittings in the cargo area floor.
Securing cargo ▷ Smaller and lighter items: secure with re‐ taining straps, the floor net or draw straps. ▷ Larger and heavy objects: secure with cargo
straps.
Attach the cargo straps, retaining straps or draw straps to the lashing eyes in the cargo area.
Securing cargo Always position and secure the cargo as described above; otherwise, it can endanger the car's occupants if sudden braking or swerving becomes necessary. Heavy or hard objects should not be carried loose inside the car; otherwise, they could be thrown around as a result of hard braking, sud‐ den swerves, etc., and endanger the occu‐ pants.◀
Roof-mounted luggage rack Note Roof racks are available as special accessories. Attachment Follow the installation instructions of the roof rack.
160
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Roof drip rail with flaps
Loading
Driving tips
The anchorage points are located in the roof drip rail above the doors. Fold the cover outward.
Loading Because roof racks raise the vehicle's center of gravity when loaded, they have a major effect on vehicle handling and steering response. Therefore, note the following when loading and driving: ▷ Do not exceed the approved roof/axle loads
and the approved gross vehicle weight.
▷ Distribute the roof load uniformly. ▷ The roof load should not be too large in area. ▷ Always place the heaviest pieces on the bot‐
tom.
▷ Secure the roof luggage firmly, e.g., tie with
ratchet straps.
▷ Drive smoothly. Avoid sudden acceleration and braking maneuvers. Take corners gen‐ tly.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
161
Driving tips
Saving fuel
Saving fuel Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
General information Your vehicle contains advanced technology for the reduction of fuel consumption and emis‐ sions. Fuel consumption depends on a number of dif‐ ferent factors. The implementation of certain measures, driv‐ ing style and regular maintenance can have an influence on fuel consumption and on the envi‐ ronmental impact.
Remove unnecessary cargo Additional weight increases fuel consumption.
Remove attached parts following use Remove auxiliary mirrors, roof or rear luggage racks which are no longer required following use. Attached parts on the vehicle impair the aero‐ dynamics and increase the fuel consumption.
Close the windows and glass sunroof Driving with the glass sunroof and windows open results in increased air resistance and raises fuel consumption.
Check the tire inflation pressure regularly Check and, if necessary, correct the tire inflation pressure at least twice a month and before start‐ ing on a long trip. Low tire inflation pressure increases rolling re‐ sistance and thus raises fuel consumption and tire wear.
Drive away without delay Do not wait for the engine to warm up while the vehicle remains stationary. Start driving right away, but at moderate engine speeds. This is the fastest way for the cold engine to reach its operating temperature.
Look well ahead when driving Avoid unnecessary acceleration and braking. By maintaining a suitable distance to the vehicle driving ahead of you. Driving smoothly and looking ahead reduces fuel consumption.
Avoid high engine speeds Use 1st gear to get the vehicle in motion. Be‐ ginning with 2nd gear, accelerate rapidly. When accelerating, shift up before reaching high en‐ gine speeds.
162
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
When you reach the desired speed, shift into the highest applicable gear and drive with the en‐ gine speed as low as possible and at a constant speed. As a rule: driving at low engine speeds lowers fuel consumption and reduces wear. The gear shift indicator of your vehicle indicates the most fuel efficient gear.
Use coasting conditions When approaching a red light, take your foot off the accelerator and let the vehicle coast to a halt. On a downhill gradient, take your foot off the ac‐ celerator and let the vehicle roll. The flow of fuel is interrupted while coasting.
Switch off the engine during longer stops Switch off the engine during longer stops, e.g., at traffic lights, railroad crossings or in traffic congestion. Fuel savings are achieved after the vehicle is switched off for only approx. 4 seconds.
Switch off any functions that are not currently needed Functions such as seat heating and the rear win‐ dow defroster require a lot of energy and con‐ sume additional fuel, especially in city and stop- and-go traffic. Therefore, switch off these functions if they are not actually needed.
Have maintenance carried out Have vehicles maintained regularly to achieve optimal vehicle economy and operating life. Have the maintenance carried out by your serv‐ ice center.
Saving fuel
Driving tips
Please also note the BMW Maintenance Sys‐ tem, refer to page 277.
ECO PRO The concept ECO PRO supports a driving style that saves on fuel consumption. For this purpose, the engine control and comfort functions, e. g. the climate control output, are adjusted. In addition, context-sensitive instructions can be displayed that assist in driving in a manner that optimizes fuel consumption. The extension of the range that is achieved as a result can be displayed in the instrument cluster. Activating ECO PRO
Press button repeatedly until ECO PRO is displayed in the instrument cluster.
Display in the instrument cluster ECO PRO bonus range
An extension of the range can be achieved by an adjusted driving style. This may be displayed as the bo‐ nus range in the instrument clus‐
ter. Driving style
In the tachometer, a mark in the bar display indicates the current efficiency of the driving style cor‐ responding to the accelerator pedal position.
▷ Blue display: efficient driving style as long as
the mark moves within the blue range.
▷ Gray display: adjust driving style, e. g. by
backing off the accelerator pedal.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
163
Driving tips
Saving fuel
The display switches to blue as soon as all con‐ ditions for fuel-economy-optimized driving are met. ECO PRO Tip - driving instruction
The arrow indicates that the driv‐ ing style can be adjusted to be more fuel efficient by backing off the accelerator.
Additional symbols
Symbol Measure
For efficient driving style, back off the accelerator.
Reduce speed to the selected ECO PRO speed.
Automatic transmission: switch from S to D or avoid manual shift interven‐ tions. Manual shift transmission: follow shifting instructions.
Manual shift transmission: engage neutral for engine stop.
Configuring ECO PRO 1. "Settings" 2. "Driving mode" 3. "Configure ECO PRO" 4. Configure the program.
ECO PRO Tip ▷ "ECO PRO limit:":
Set ECO Pro speed at which an ECO PRO Tip is to be displayed.
▷ "ECO PRO speed warning":
A reminder is displayed if the set ECO PRO speed is exceeded.
ECO PRO climate control "ECO PRO climate control" The climate control is adjusted to be fuel-effi‐ cient. The following settings are optimized: ▷ Cooling or heat output of the automatic cli‐
mate control
▷ Exterior mirror heating ▷ Seat heating ECO PRO Potential The percentage of potential savings that can be achieved with the current configuration is dis‐ played. Indications on the Control Display EfficientDynamics Information on fuel consumption and technol‐ ogy can be displayed during driving. 1. "Vehicle Info" 2. "EfficientDynamics" Displaying fuel consumption history The average fuel consumption can be displayed within an adjustable time frame.
"Consumption history"
Adjusting fuel consumption history time frame
Select the symbol.
164
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Saving fuel
Driving tips
Resetting fuel consumption history 1. "Options" Open. 2. "Reset consumption history" Displaying EfficientDynamics info The current efficiency can be displayed.
"EfficientDynamics Info"
The following systems are displayed: ▷ Automatic engine start/stop function. ▷ Energy recovery. ▷ Climate control output.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
165
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Navigation
This chapter contains various examples of how the navigation system can guide you reliably to your destination.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Navigation
Navigation system
Navigation system Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
General information The navigation system can determine the pre‐ cise position of the vehicle, with the aid of sat‐ ellites and vehicle sensors, and can reliably guide you to every entered destination. Navigation data are stored in the vehicle and can be updated.
Entries in stationary vehicle Enter data only when the vehicle is sta‐
tionary, and always give priority to the applicable traffic regulations in the event of any contradic‐ tion between traffic and road conditions and the instructions issued by the navigation system. Failure to take to this precaution can place you in violation of the law and put vehicle occupants and other road users in danger.◀
Starting navigation system
Press the button on the controller.
1. 2. "Navigation"
The navigation system can also be ac‐ cessed directly with the button on the con‐
troller.
Destination input Manual destination entry General information The system supports you in entering street names and house numbers by automatically completing the entry and providing entry com‐ parisons, refer to page 22. Stored town/city and street names can be called up quickly. ▷ If the existing entries should not be changed, the entries for the state/province and town/ city can be skipped.
▷ Destination guidance is started to the town/
city center if no street is entered.
Entering a state/province 1. "Navigation" 2. "Enter address"
3. Select "State/Province" or the displayed
state/province.
168
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Entering a town/city 1. Select "Town/City/Postal Code" or the dis‐
played town/city.
2. Select letters, if necessary.
The list is narrowed down further with each entry.
3. Move the controller to the right. 4. Select the town/city name from the list. If there are several towns/cities with the same name: 1. Change to the list of town/city names. 2. Highlight the town/city. 3. Select the town/city. Entering the postal code 1. Select "Town/City/Postal Code" or the dis‐
played town/city.
Navigation system Navigation
3. Select the street. Alternative: enter the street address and house number 1. Select "Street" or the displayed street. 2. Enter the street as you would the town/city. 3. "House number" 4. Select the numbers. 5. Change to the list of house numbers. 6. Select a house number or range of house
numbers.
Street does not exist in the destination city/town The desired street does not exist in the specified city/town because it belongs to another part of the city/town. 1. "Navigation" 2. "Enter address" 3. Select "Street" or the displayed street. 4. Change to the list of street names. 5. Select "In" the displayed country.
All streets of the selected state/province are offered. The associated town/city is dis‐ played after the street name.
Select the symbol.
2. 3. Select the numbers. 4. Change to the list of postal codes and towns/
cities.
5. Highlight the entry. 6. Selecting an entry. Entering a street and intersection 1. Select "Street" or the displayed street. 2. Enter a street and intersection in the same
way as you would enter a town/city.
If there are several streets with the same name: 1. Change to the list of street names. 2. Highlight the street.
6. Select the letters. 7. Change to the list of street names. 8. Highlight the street. 9. Select the street.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
169
Navigation
Navigation system
Starting destination guidance after entering the destination 1. "Accept destination" 2. "Start guidance" or "Add as another
destination" Add, refer to page 175, a destination as a further destination.
Address book Selecting a destination from the address book 1. "Navigation" 2. "Address book"
Contacts with addresses are displayed if these have been checked as destinations. If the mobile phone does not display the contacts with addresses, they must first be checked as a destination, refer to page 248.
5. "Store as new contact" or "Add to existing
contact"
6. Select an existing contact, if available. 7. "Business address" or "Home address" 8. Enter "Last name" and, if necessary, "First
name".
9. "Store in vehicle" Storing the position The current position can be stored in the ad‐ dress book. 1. "Navigation" 2. "Options" Open. 3. "Store position as contact" or "Add position
to contact"
3. Select a contact in the list or, if desired, with
"A-Z search".
4. "Business address" or "Home address" Storing the destination in the address book After entering the destination, store the desti‐ nation in the address book. 1. "Navigation" 2. "Map" 3. 4. "Options" Open.
"Guidance"
4. Depending on the selection, choose an ex‐ isting contact from the list. Select the type of address and enter the first and last names.
5. "Store in vehicle" Editing or deleting an address 1. "Navigation" 2. "Address book"
170
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
3. Highlight the entry. 4. "Options" Open. 5. "Edit in Contacts" or "Delete entry" Using the home address as the destination The home address must be stored. Specify the home address, refer to page 247. 1. "Navigation" 2. "Address book" 3. "Home"
4. "Start guidance" Last destinations At a glance The destinations previously entered are stored automatically. The destinations can be called up and used as a destination for destination guidance. Calling up the last destination 1. "Navigation" 2. "Last destinations"
Navigation system Navigation
Starting destination guidance 1. "Navigation" 2. "Last destinations" 3. Select the destination. 4. "Start guidance" Editing the destination 1. "Navigation" 2. "Last destinations" 3. Highlight the destination. 4. Open "Options". 5. "Edit destination" Deleting the last destinations 1. "Navigation" 2. "Last destinations" 3. Highlight the destination. 4. Open "Options". 5. "Delete entry" or "Delete all last
destinations"
Special destinations General information Even with the most current navigation data, in‐ formation regarding particular individual desti‐ nations may have changed. For instance, certain gas stations may not be operating. Opening the search for special destinations To select special destinations, e.g., hotels or tourist attractions: 1. "Navigation" 2. "Points of Interest" 3. Select the search function.
Online Search 1. "Google™ Local Search" 2. Select a special destination.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
171
Navigation
Navigation system
Select the symbol.
3. 4. "Start guidance"
A-Z search 1. "A-Z search" 2. "Town/City"
Select or enter the town/city.
3. "Category" 4. Select the category. 5. "Category details"
For some special destinations, multiple cat‐ egory details can be selected. Move the controller to the left to leave the category details.
6. "Keyword" 7. Enter the keyword.
A list of the special destinations is displayed.
8. Select a special destination.
Details are displayed. If multiple details are stored, you can leaf through the pages. If a phone number is available, a connection can be established if necessary.
9.
Select the symbol.
"Start guidance" or "Add as another destination" Add, refer to page 175, a destination as a further destination.
"Start search": if a search term is not entered, the search is repeated with the previous search term.
Category search 1. "Category search" 2. "Town/City"
Select or enter the town/city.
3. "Category" 4. Select the category. 5. "Category details"
For some special destinations, multiple cat‐ egory details can be selected. Move the controller to the left to leave the category details.
6. "Start search"
A list of the special destinations is displayed.
7. Select a special destination.
Details are displayed. If multiple details are stored, you can leaf through the pages. If a phone number is available, a connection can be established if necessary.
8.
Select the symbol.
"Start guidance" or "Add as another destination" Add, refer to page 175, a destination as a further destination.
Display of special destinations List of special destinations: special destinations are organized by distance and are displayed with a directional arrow to the special destination. On the split screen, special destinations of the selected category are displayed in the map view as symbols. The display depends on the scale of the map and the category. Destination entry via BMW Assist A connection is established to the Concierge service, refer to page 251. 1. "Navigation" 2. "Enter address" 3. "Options" Open. 4. "BMW Assist dest. entry"
172
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Displaying special destinations in the map To display symbols of the special destinations in the map view: 1. "Navigation" 2. "Map" 3. "Options" Open. 4. "Display Points of Interest" 5. Select the setting. Destination entry by map Selecting the destination 1. "Navigation" 2. "Map"
The current position of the vehicle is indi‐ cated on the map.
3.
"Interactive map"
Navigation system Navigation
Additional functions Additional functions are available on the inter‐ active map after the controller is pressed.
▷
Select the symbol.
"Start guidance" or "Add as another destination"
▷ "Exit interactive map": return to the map
view.
▷ "View in northern direction" or "View in
driving direction"
▷ "Display destination": the map section
around the destination is displayed.
▷ "Display current location": the map section around your current location is displayed.
4. Select the destination with crosshairs.
▷ To change the scale: turn the controller. ▷ To shift the map: move the controller in
the required direction.
▷ To shift the map diagonally: move the controller in the required direction and turn it.
Specifying the street If the system does not recognize a street, one of the following is displayed: ▷ The name of a street nearby. ▷ The county. ▷ The coordinates of the destination.
▷ "Find points of interest": the search for spe‐
cial destinations is started. Destination entry by voice General information ▷ Instructions for voice activation system, re‐
fer to page 23.
▷ When making a destination entry by voice, you can change between voice operation and iDrive.
▷ To have the available spoken instructions
read out loud: ›Voice commands‹
Saying the entries ▷ The town/city, street, and house number
can be entered as a single command.
▷ Countries, towns and cities, streets, and in‐ tersections can be said as whole words or
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
173
Navigation
Navigation system
spelled in the language of the system. Set the language, refer to page 84. Example: to enter a town/city in a US state as a whole word, the language of the system must be English.
▷ Spell the entry if the spoken language and
the language of the system differ.
▷ Say the letters smoothly, and avoid exag‐ gerating the pronunciation and inserting lengthy pauses between the letters.
▷ The options available for entering data de‐ pend on the navigation data and the country and language settings.
Entering an address in a command
1.
Press the button on the steering
wheel. ›Enter address‹
2. 3. Wait for a request from the system. 4. Say the address in the suggested order. 5. Continue making the entry as prompted by
the system.
If necessary, individually name the separate components of the address, e.g., the town/city. Entering a town/city separately The name of the town/city can be said as a word or spelled out. With the destination entry menu displayed:
1.
Press the button on the steering
wheel. ›City‹ or ›Spell city‹.
2. 3. Wait for the system to prompt you for the
town/city.
4. Say the name of the town/city, or say at least
the first three letters. Depending on the entry, up to 20 towns/cit‐ ies may be suggested.
5. Select the town/city.
▷ To select a recommended town/
city: ›Yes‹
▷ To select a different town/city: ›New
entry‹
▷ Select an entry: ›Entry ...‹ e.g., entry 2
▷ To spell an entry: ›Spell city‹6. Continue making the entry as prompted by
the system.
If there are several towns/cities with the same name: Towns/cities of the same name are grouped in a list and displayed as one location followed by an ellipsis. 1. Select an entry: ›Yes‹ or ›Entry ...‹ e.g., en‐
try 2.
2. Select the desired town/city. Entering a street or intersection separately Enter a street and intersection in the same way as you would enter a town/city. Entering a house number separately Depending on the data in the navigation system, house numbers up to number 2,000 can be en‐ tered. 1. 2. Say the house number.
›House number‹
Say each digit separately.
3. Continue making the entry as prompted by
the system.
Planning a trip with intermediate destinations New trip A trip can be planned with several intermediate destinations. 1. "Navigation" 2. "Map"
174
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
"Guidance"
3. Move the controller to the left if necessary. 4. 5. "Enter new destination" 6. Select the type of destination entry.
7. Enter the intermediate destination. 8. "Start guidance" Entering intermediate destinations A maximum of 30 intermediate destinations can be entered for one trip. 1. "Enter new destination" 2. Select the type of destination entry. 3. Enter the intermediate destination. 4. "Add as another destination"
The intermediate destination is entered in the destination list and is highlighted.
5. Turn the controller until the intermediate
destination is located in the desired position in the list.
6. Press the controller. Starting the trip 1. After all intermediate destinations are en‐
tered, highlight the first destination. If the second destination, for example, is highlighted when destination guidance is started, the first destination is skipped.
2. "Start guidance"
This symbol marks the active leg of the
trip.
Navigation system Navigation
Storing a trip Up to 30 trips can be stored in the trip list. If necessary, delete existing trips to be able to store new trips. 1. Open "Options". 2. "Store trip" 3. Enter the name. 4. "OK" Selecting a stored trip 1. "Navigation" 2. "Stored trips" 3. Select a stored trip. 4. "Start guidance" Reversing the direction of travel Intermediate destinations are displayed in re‐ verse order in the list. 1. "Map" 2. 3. Open "Options". 4. "Reverse order of trip dest." Intermediate destination options 1. "Map" 2. 3. "Display all trip destinations" 4. Select an intermediate destination.
"Guidance"
"Guidance"
▷ "Edit destination" ▷ "Reposition dest. in the trip": move an intermediate destination to another po‐ sition in the list.
▷ "Delete dest. in the trip" ▷ "Go to next dest. in the trip"
Some options are not available for certain trips. Deleting a stored trip 1. "Stored trips" 2. Highlight the desired trip.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
175
▷ The route criteria can be changed when the destination is entered and during destina‐ tion guidance.
▷ Road types are part of the navigation data and are taken into consideration when plan‐ ning a route, such as when avoiding high‐ ways.
▷ The recommended route may differ from the route you would take based on personal ex‐ perience.
▷ The settings are stored for the remote con‐
trol currently in use.
▷ Destination guidance with traffic bulletins,
refer to page 182.
Changing the route criteria 1. "Navigation" 2. "Map" 3. 4. Select the criterion:
"Route preference"
▷
▷
▷
"Fast route": time-optimized route, being a combination of the shortest pos‐ sible route and the fastest roads.
"ECO PRO route": optimized com‐
bination of the fastest and shortest route.
"Short route": short distance, irre‐
spective of how fast or slow progress will be.
▷ "Alternative routes": if available, alter‐ native routes are suggested during ac‐ tive route guidance.
Navigation
Navigation system
3. Open "Options". 4. "Delete all trips" or "Delete trip" Calling up the last trip 1. "Navigation" 2. "Stored trips" 3. "Last trip" 4. "Start guidance"
Destination guidance Starting destination guidance 1. "Navigation" 2. Make a destination entry, refer to page 168. 3. "Accept destination" 4. "Start guidance" ▷ The route is shown on the Control Display. ▷ The distance to the destination/intermedi‐ ate destination and the estimated time of ar‐ rival are displayed in the map view.
▷ The arrow view is shown in the instrument cluster, in the Head-up Display, and on the Control Display where appropriate.
"Guidance"
Terminating destination guidance 1. "Navigation" 2. "Map" 3. 4. "Stop guidance" Continuing destination guidance If the destination was not reached during the last trip, destination guidance can be resumed. "Resume guidance" Route criteria General information ▷ The route calculated can be influenced by
selecting certain criteria.
176
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Navigation system Navigation
Lane information On multi-lane roads, the recommended lanes are marked in the arrow view by a triangle. ▷ Solid triangle: best lane. ▷ Empty triangle: possible lane. However, an‐ other lane change may be needed shortly.
Displaying list of route sections When the destination guidance is activated, a list of route sections can be displayed. The driv‐ ing distances and traffic bulletins are displayed for each route section. 1. "Navigation" 2. "Route information" 3. Highlight route section.
The route section is displayed on the split screen.
Bypassing a section of the route Calculate a new route for a route section. 1. "Navigation" 2. "Route information" 3. "New route for"
4. Turn the controller. Enter the number of
miles within which you would like to return to the original route. 5. Press the controller.
The individual suggestions are high‐ lighted in color.
5. Specify additional criteria for the route, if
necessary: ▷ "Avoid highways": highways are
avoided wherever possible.
▷ "Avoid toll roads": toll roads are avoided
wherever possible.
▷ "Avoid ferries": ferries are avoided
where possible.
Route Different views of the route are available during destination guidance: ▷ Arrow view in the instrument cluster and on
the Control Display.
▷ List of route sections. ▷ Map view, refer to page 178. ▷ Arrow view in the Head-up Display. Arrow view The following information is displayed during destination guidance: ▷ Large arrow: current direction of travel. ▷ Street name of the currently traveled street. ▷ Small arrow: indicates the next change in di‐
rection.
▷ Intersection view. ▷ Lane information. ▷ Traffic bulletins. ▷ Distance to the next change in direction. ▷ Street name at the next change in direction.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
177
Navigation
Navigation system
Resuming the original route If the route section should no longer be by‐ passed: 1. "Navigation" 2. "Route information" 3. "New route for:" 4. "Remove blocking" Gas station recommendation The remaining range is calculated, and if nec‐ essary gas stations along the route are dis‐ played. Even with the most current navigation data, in‐ formation regarding individual gas stations may have changed. For instance, certain gas stations may not be operating. 1. "Navigation" 2. "Route information" 3. "Recommended refuel"
A list of the gas stations is displayed.
4. Highlight a gas station.
The position of the gas station is displayed on the split screen.
5. Select the gas station. Select the symbol. 6. 7. "Start guidance": destination guidance to
the selected gas station is started. "Add as another destination": the gas sta‐ tion is added to the route.
Switching spoken instructions on/off The setting is stored for the remote control cur‐ rently in use. 1. "Navigation" 2. "Map"
3.
"Voice instructions"
Repeating spoken instructions 1. "Navigation" 2. "Map" 3. Highlight the symbol. 4. Press the controller twice. Volume of spoken instructions Turn the volume button while giving an instruc‐ tion until the desired volume is set. Saving the spoken instructions on the programmable memory buttons The function for switching the spoken instruc‐ tions on/off can be stored on a programmable memory button, refer to page 21, for quick ac‐ cess.
Map view Selecting the map view 1. "Navigation" 2. "Map" At a glance
1 Function bar 2 Route section with traffic obstruction 3 Traffic sign for traffic obstruction 4 Planned route 5 Current location 6 Upper status field 7 Lower status field
178
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Lines in the map Streets and routes are displayed in different col‐ ors and styles depending on their classification. Dashed lines represent railways and ferry con‐ nections. Country borders are indicated by thin lines. Traffic obstructions Small triangles along the planned route indicate route sections with traffic obstructions, depend‐ ing on the map scale. The direction of the trian‐ gles indicates the direction of the obstruction. The traffic signs indicate the significance of the obstruction. ▷ Red traffic sign: the obstruction affects the
planned route or direction.
▷ Gray traffic sign: the obstruction does not
affect the planned route or direction.
Traffic bulletins, refer to page 180. Planned route After destination guidance is started, the plan‐ ned route is displayed on the map. Status fields Show/hide: press the controller. ▷ Upper status field: time, telephone, and en‐
tertainment details.
▷ Lower status field: symbol for active desti‐ nation guidance, status of traffic bulletins, time of arrival, and distance to destination.
Function bar The following functions are available in the func‐ tion bar: Symbol
Function Start/end destination guidance. Switch spoken instructions on/ off.
Change the route criteria.
Navigation system Navigation
Symbol
Function Search for a special destination. Display traffic bulletins. Interactive map.
Set the map view. Change the scale.
To change to the function bar, move the con‐ troller to the left. Changing the map section
"Interactive map"
▷ To shift the map: move the controller in the
required direction.
▷ To shift the map diagonally: move the con‐ troller in the required direction and turn it.
Select the symbol.
Changing the scale 1. 2. To change the scale: turn the controller. Automatically scaled map scale In the map view facing north, turn the controller in any direction until the AUTO scale is dis‐ played. The map shows the entire route be‐ tween the current location and the destination. Settings for the map view The settings are stored for the remote control currently in use. 1. "Navigation" 2. "Map" 3. "Options" Open. 4. "Settings" Set the map view. ▷ "Day/night mode"
Select and create the necessary settings depending on the light conditions.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
179
Navigation
Navigation system
"Traffic conditions/gray map" active: the setting is disregarded.
▷ "Satellite images"
Depending on availability and resolution, satellite images are displayed in a scale of approx. 1 mile to 600 miles/2 km to 1,000 km.
▷ "Perspective view in 3D"
Prominent areas that are contained in the navigation data are displayed on the map in 3D.
▷ "Traffic conditions/gray map"
The map is optimized for displaying traffic bulletins, refer to page 180. Symbols for the special destinations are no longer displayed.
Map view for split screen The map view can be selected for the split screen independently from the main screen. 1. "Options" Open. 2. "Split screen" 3. Move the controller to the right repeatedly
until the split screen is selected.
4. Select "Split screen content" or the scale. 5. Select the map view. ▷ "Arrow display" ▷ "Map facing north" ▷ "Map direction of travel" ▷ "Map view with perspective" ▷ "Position" ▷ "Exit ramp view": selected blind drive‐ ways are displayed three dimensionally. Setting in some cases will affect the dis‐ play in the Head-Up Display. ▷ "Traffic conditions/gray map"
6. To change the scale: select the split screen
and turn the controller.
Traffic bulletins At a glance General information ▷ Display the traffic bulletins from radio sta‐ tions that broadcast the TI Traffic Informa‐ tion of a traffic information service. Informa‐ tion on traffic obstructions and hazards is updated continuously. Certain BMW models equipped with navi‐ gation have the capability to display real- time traffic information. If your system has this capability the following additional terms and conditions apply: An End-User shall no longer have the right to use the Traffic Data in the event that the End-User is in material breach of the terms and conditions contained herein. A. Total Traffic Network, a division of Clear Channel Broadcasting, Inc. (“Total Traffic Network”) holds the rights to the traffic in‐ cident data and RDS-TMC network through which it is delivered. You may not modify, copy, scan or use any other method to re‐ produce, duplicate, republish, transmit or distribute in any way any portion of traffic in‐ cident data. You agree to indemnify, defend and hold harmless BMW of North America, LLC. (“BMW NA”) and Total Traffic Net‐ work, Inrix, Inc (and their affiliates) against any and all claims, damages, costs or other expenses that arise directly or indirectly out of (a) your unauthorized use of the traffic in‐ cident data or the RDS-TMC network, (b) your violation of this directive and/or (c) any unauthorized or unlawful activities by you in connection herewith. B. Total Traffic Network traffic data is infor‐ mational only. User assumes all risk of use. Total Traffic Network, BMW NA, and their suppliers make no representations about content, traffic and road conditions, route usability, or speed.
180
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
C. The licensed material is provided to li‐ censee “as is,” and “where is”. Total Traffic Network, including, but not limited to, any and all third party providers of any of the li‐
