Login- Download PDF Manual
-
emergency, see page
521
11/07/20 18:58:18 31SJA670_447
Towing a Trailer, Towing Your Vehicle
HandlingCrosswindsandBuffeting BackingUp Crosswinds and air turbulence caused by passing trucks can disrupt your steering and cause the trailer to sway. When being passed by a large vehicle, keep a constant speed, and steer straight ahead. Do not try to make quick steering or braking corrections.
Always drive slowly and have someone guide you when backing up. Grip the wheel; turn the wheel to the left to get the trailer to move to the left, and turn the wheel right to move the trailer to the right.
of the steering
bottom
Parking Follow all normal precautions when parking, including firmly setting the parking brake and putting the transmission in Park. Also, place wheel chocks at each of the trailer’s tires.
442
11/07/20 18:58:24 31SJA670_448
This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions.
This section also includes instructions on how to read the Maintenance Minder messages on the multi-information display, and instructions for simple maintenance tasks you may want to take care of yourself.
If you have the skills and tools to perform more complex maintenance tasks on your vehicle, you may want to purchase the service manual. See page for information on how to obtain a copy, or see your dealer.
543
U.S. Vehicles: Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individual using parts that are ‘‘certified’’ to EPA standards.
Maintenance
TM
Maintenance Safety Maintenance Minder Fluid Locations Engine Compartment Covers Adding Engine Oil Changing the Engine Oil and
...................... ................. .............................. ...... ........................
. 444
. 445
. 455
. 456
. 458Filter
. 459
Engine Coolant . 461
Windshield Washers . 463
Automatic Transmission Fluid . 464
. 466
Brake Fluid . 467
Power Steering Fluid Timing Belt . 467
. 468
Lights . 476
Dust and Pollen Filter . 476
Cleaning the Seat Belts . 477
Floor Mats Wiper Blades . 478
. 480
Exterior Care . 480
Wheels . 481
Tires Checking the Battery . 490
. 493
Vehicle Storage Interior Care . 494........................................... .............................. .................... .... .................................... .................... .................................... ............................................. .................. ................ ..................................... ................................. ................................. ........................................... ............................................... ................... ............................. ..................................
443
11/07/20 18:58:35 31SJA670_449
Maintenance Safety
All service items not detailed in this section should be performed by a certified technician or other qualified mechanic.
Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required.
Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.
To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.
To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the battery and all fuel-related parts.
Wear eye protection and protective clothing when working with the battery or compressed air.
444
Improperly maintaining this vehicle, or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.
Always follow the inspection and maintenance recommendations and schedules in this owner’s manual.
Injury from moving parts. not run the engine unless instructed to do so.
Do
Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this owner’s manual.
Potential Vehicle Hazards
Carbon Monoxide poison from engine exhaust. Be sure there is adequate ventilation whenever you operate the engine.
Burns from hot parts. Let the engine and exhaust system cool down before touching any parts.
Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.
11/07/20 18:58:43 31SJA670_450
Your vehicle displays engine oil life and maintenance service items on the multi-information display to show you when you should have your dealer perform engine oil replacement and indicated maintenance service.
Based on engine operating conditions and accumulated engine revolutions, the onboard computer in your vehicle calculates the remaining engine oil life.
Engine Oil Life Display
REMAINING ENGINE OIL LIFE
To see the remaining engine oil life displayed on the lower right corner on the multi-information display as a percentage, turn the ignition switch to the ON (II) position, and press the SEL/RESET button on the steering wheel repeatedly until the engine oil life appears (see page
73
).
Maintenance Minder
TM
The remaining engine oil life is shown on the multi-information display according to this table:
Calculated Engine
Displayed
Oil Life (%) 91% 100% 81% 90% 80% 71% 61% 70% 51% 60% 41% 50% 31% 40% 30% 21% 16% 20% 11% 15% 6% 10% 5% 1%
− − − − − − − − − − − − 0%
Engine Oil Life (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 15% 10% 5% 0%
CONTINUED
445
11/07/20 18:58:50 31SJA670_451
Maintenance Minder
TM
MAINTENANCE MAIN ITEM
MAINTENANCE SUB ITEM(S)
When the remaining engine oil life is 15 to 6 percent, the multi-information display shows a ‘‘SERVICE DUE SOON’’ message along with the maintenance schedule code(s) indicating the main and sub items required at the time of the oil change. for a Refer to pages complete list of the maintenance main items and sub items.
and
453
454
446
Pressing either INFO button ( / ) ▲ ▼ switches the display from the message to another display. Once you switch the display, this message will go off.
MESSAGE
Along with the message, the system message indicator comes on (see page
68
).
The message appears on the multi- information display each time you turn the ignition switch to the ON (II) position.
This message reminds you that your vehicle will soon be due for scheduled maintenance.
MAINTENANCE ITEM CODE(S)
REMAINING ENGINE OIL LIFE
Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life. The message ‘‘OIL LIFE’’ along with the percentage of oil life remaining and the maintenance item code(s), appear on the lower part of the multi- information display.
11/07/20 18:58:56 31SJA670_452
Maintenance Minder
TM
Pressing either INFO button ( / ) ▲ ▼ switches the display from the message to another display. Once you switch the display, this message will go off.
When the remaining engine oil life is 1 to 5 percent, the multi-information display shows a ‘‘SERVICE DUE NOW’’ message with the maintenance items. When you see this message have the indicated maintenance performed as soon as possible.
Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life. The message ‘‘SERVICE OIL LIFE’’, along with ‘‘5%’’, and the maintenance item code(s) are displayed on the lower part of the multi-information display when the calculated engine oil life is 1 to 5 percent (see page
445
).
CONTINUED
447
11/07/20 18:59:05 31SJA670_453
Maintenance Minder
TM
The maintenance item code or codes indicate the main and sub items required at the time of the oil change (see page
453
).
Your dealer will reset the display after completing the required maintenance service. You will see ‘‘OIL LIFE 100%’’ on the display the next time you turn the ignition switch to the ON (II) position.
If maintenance service is done by someone other than your dealer, reset the Maintenance Minder as follows:
1.
Turn the ignition switch to the ON (II) position.
2.
If the engine oil life display is not displayed, press the SEL/RESET button on the steering wheel repeatedly until it is.
448
or
▲ ▼
To cancel resetting the oil life, press the button on the steering wheel to select CANCEL on the display, and press the SEL/ RESET button.
If you do not complete the reset procedure within 30 seconds after selecting the reset mode, the mode will be canceled automatically.
U.S.
Canada
3.
Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi- information display.
or
▼ ▲
button on the steering
To reset the engine oil life, press the wheel to select RESET on the display, and press the SEL/ RESET button.
11/07/20 18:59:12 31SJA670_454
Maintenance Minder
TM
Immediately have the service performed, and make sure to reset the engine oil life display as previously described.
These messages will come on every time you turn the ignition switch to the ON (II) position.
Pressing either INFO button ( / ) ▲ ▼ switches the display from the message to another display. To see the message again, press either INFO button repeatedly.
If the indicated maintenance service is not done and the remaining engine oil life reaches 0%, the multi- information display will show the message ‘‘SERVICE PAST DUE’’ and the maintenance item code(s). This message is displayed when the total distance traveled is less than 10
miles (for U.S. models) or 10 km (for Canadian models) after the engine oil life became 0%.Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life minder. The message ‘‘SERVICE OIL LIFE’’, along with ‘‘0%’’, and the maintenance item code are displayed on the lower part of the multi- information display when the calculated engine oil life is 0 percent.
CONTINUED
449
11/07/20 18:59:19 31SJA670_455
Maintenance Minder
TM
Also, the percentage ‘‘0’’ keeps blinking on the display.
This particular message is displayed when the mileage after the engine oil life became 0% reaches 10 miles (for U.S. models)/10 km (for Canadian models).
450
This message is displayed again when you drive over 10 miles (for U.S. models) or 10 km (for Canadian models) after seeing the 0% message.
Immediately have the service performed, and make sure to reset the display as previously described.
These messages will come on every time you turn the ignition switch to the ON (II) position.
Pressing either INFO button ( / ) ▲ ▼ switches the display from the message to another display. To see the message again, press either INFO button repeatedly.
NEGATIVE DISTANCE TRAVELED
U.S.
MAINTENANCE ITEM CODE(S)
Canada
If the indicated required service is not done and the remaining engine oil life becomes 0%, the multi- information display will show a ‘‘SERVICE PAST DUE’’ message, the total distance traveled after the remaining oil life became 0%, and the maintenance item code(s).
11/07/20 18:59:25 31SJA670_456
U.S.
Canada
TOTAL NEGATIVE DISTANCE TRAVELED
When you press the SEL/RESET button to select the engine oil life minder, the message ‘‘SERVICE’’, along with the maintenance item code and the total negative distance traveled after the oil life became 0
percent, will be displayed on the lower part of the multi-information display.This particular message is displayed when you drive over 10 miles (for U.S. models) or 10 km (for Canadian models) after seeing 0%.
Maintenance Minder
TM
Important Maintenance Precautions If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the correct maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.
CONTINUED
451
11/07/20 18:59:34 31SJA670_457
Maintenance Minder
TM
Your authorized dealer knows your vehicle best and can provide competent, efficient service. However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Keep all receipts as proof of completion, and have the person who does the work fill out your Maintenance Journal or Canadian Maintenance Log. Check your warranty booklet for more information.
We recommend using Acura parts and fluids whenever you have maintenance done. These are manufactured to the same high quality standards as the original components, so you can be confident of their performance and durability.
452
＃
U.S. Vehicles: According to state and federal regulations, failure to perform maintenance on the items marked with will not void your emissions warranties. However, all maintenance services should be performed in accordance with the intervals indicated by the multi- information display.
Owner’s Maintenance Checks You should check the following items at the specified intervals. If you are unsure of how to perform any check, turn to the appropriate page listed.
Engine oil level time you fill the fuel tank. See page
Check every
387
−
Engine coolant level radiator reserve tank every time you fill the fuel tank. See page
Check the
387
−
Automatic transmission Check the fluid level monthly. See page 463
−
Brakes monthly. See page
−
Check the fluid level
467
−
Tires Check the tire pressure monthly. Examine the tread for wear and foreign objects. See page 480
−
Check the operation of
Lights all the lights monthly. See page 468
11/07/20 18:59:41 31SJA670_458
Maintenance Minder
TM
Symbol
Maintenance Main Items
Replace engine oil ＊ Replace engine oil and oil filter Inspect front and rear brakes Check parking brake adjustment Inspect these items:
Tie rod ends, steering gear box, and boots Suspension components Driveshaft boots Brake hoses and line (including ABS/VSA) All fluid levels and condition of fluids Exhaust system ＃ Fuel lines and connections ＃
＊
＃
NOTE:
If the message ‘‘SERVICE DUE NOW’’ does not appear more than 12 months after the display is reset, change the engine oil every year.
See information on maintenance and emissions warranty on page
452
Independent of the Maintenance Minder information, replace the brake fluid every 3 years. Inspect idle speed every 160,000 miles (256,000 km). Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy.
CONTINUED 453
Symbol
Replace rear differential fluid
Maintenance Sub Items
Driving in mountainous areas at very low vehicle speeds or trailer towing results in higher level of mechanical (shear) stress to fluid. This requires differential fluid changes more frequently than recommended by the Maintenance Minder. If you regularly drive your vehicle under these conditions, have the differential fluid changed at 7,500 miles (12,000 km), then every 15,000 miles (24,000 km).
11/07/20 18:59:47 31SJA670_459
Maintenance Minder
TM
Maintenance Sub Items
Rotate tires Replace air cleaner element
If you drive in dusty conditions, replace every 15,000
miles (24,000 km).Replace dust and pollen filter
If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace every 15,000
miles (24,000 km).Inspect drive belt Replace transmission and transfer fluid
Driving in mountainous areas at very low vehicle speeds or trailer towing results in higher transmission and transfer temperatures. This requires transmission and transfer fluid changes more frequently than recommended by the Maintenance Minder. If you regularly drive your vehicle under these conditions, have the transmission and transfer fluid changed at 60,000 miles (100,000 km), then every 30,000 miles (48,000 km).
Replace spark plugs Replace timing belt and inspect water pump
20°F,
If you drive regularly in very high temperatures (over 110°F, 43°C), or in very low temperatures (under 29°C), replace every 60,000 mile (U.S.)/ − 100,000 km (Canada). Inspect valve clearance Replace engine coolant
−
Symbol
454
11/07/20 18:59:51 31SJA670_460
ENGINE OIL DIPSTICK (Orange loop)
WASHER FLUID (Black cap)
POWER STEERING FLUID ＊ (Red cap)
ENGINE COOLANT RESERVOIR
＊
: Located under the cover.
Fluid Locations
BRAKE FLUID (Black cap)
ENGINE OIL FILL CAP
AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop)
RADIATOR CAP ＊
455
11/07/20 18:59:59 31SJA670_461
Engine Compartment Covers
The component parts in the engine compartment are protected by several covers. You may need to remove the covers when you perform some simple maintenance work.
All of the covers are secured by holding clips.
To remove the battery cover, turn the knob of the fastener and remove the holding clips by pushing on the center of each fastener head.
To remove the front bulkhead cover:
1.
Remove the battery cover.
2.
Remove the holding clips by pushing on the center of each fastener head.
456
FRONT BULKHEAD COVER
BATTERY COVER
CLIPS
CLIPS
CLIPS
KNOB
Unlock Lock
Push to remove clip Push to reset/install clip
11/07/20 19:00:08 31SJA670_462
To remove the left engine compartment cover:
1.
2.
Remove the battery cover (see page
492
).
Remove the holding clips by pushing on the center of each fastener head.
To remove the right engine compartment cover:
1.
Remove the battery and front bulkhead covers (see page 456
).
2.
3.
Remove the holding clips by pushing on the center of each fastener head.
Take the windshield washer hose out from the holder on the bottom side of the cover.
When reinstalling the covers, make sure the pins and tabs are in their proper positions.
Engine Compartment Covers
RIGHT ENGINE COMPARTMENT
LEFT ENGINE COMPARTMENT
CLIPS
CLIPS
CLIP
Push to remove clip Push to reset/install clip
457
11/07/20 19:00:16 31SJA670_463
Adding Engine Oil
Recommended Engine Oil Oil is a major contributor to your engine’s performance and longevity. Always use a premium-grade 5W-20
detergent oil displaying the API Certification Seal. This seal indicates the oil is energy conserving, and that it meets the American Petroleum Institute’s latest requirements.API CERTIFICATION SEAL
Ambient Temperature
Acura Motor Oil is the preferred 5W-20 lubricant for your vehicle. It is highly recommended that you use Acura Motor Oil in your vehicle for optimum engine protection. Make sure the API Certification Seal says ‘‘For Gasoline Engines.’’ The oil viscosity or weight is provided on the container’s label. 5W-20 oil is formulated for year- round protection of your vehicle to improve cold weather starting and fuel economy.
ENGINE OIL FILL CAP
Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully so you do not spill any. Clean up any spills immediately. Spilled oil could damage components in the engine compartment.
Install the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level. Do not fill above the upper mark; you could damage the engine.
458
11/07/20 19:00:24 31SJA670_464
Adding Engine Oil, Changing the Engine Oil and Filter
Synthetic Oil You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil: it displays the API Certification Seal and it is the proper weight. You must follow the oil and filter change intervals shown on the multi- information display.
Engine Oil Additives Your vehicle does not require any oil additives. Additives may adversely affect the engine or transmission performance and durability.
Changing the Engine Oil and Filter Always change the oil and filter according to the maintenance messages shown on the multi- information display. The oil and filter collect contaminants that can damage your engine if they are not removed regularly.
Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service station- type hydraulic lift for this service. Unless you have the knowledge and proper equipment, you should have this maintenance done by a skilled technician.
1.
Run the engine until it reaches normal operating temperature, then shut it off.
OIL DRAIN BOLT WASHER
2.
Open the hood, and remove the engine oil fill cap. Remove the oil drain bolt and washer from the bottom of the engine. Drain the oil into an appropriate container.
CONTINUED
459
11/07/20 19:00:35 31SJA670_465
Changing the Engine Oil and Filter
4.
5.
6.
7.
Install a new oil filter according to the instructions that come with it. Make sure to clean off any dirt and dust on the contacting surface of a new oil filter.
8.
9.
Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten the drain bolt to: 29 lbf·ft (39 N·m , 4.0 kgf·m)
Let the engine run for several minutes, then check the drain bolt and oil filter for leaks.
Turn off the engine and let it sit for several minutes, then check the oil level on the dipstick. If necessary, add more oil.
Refill the engine with the recommended oil. Engine oil change capacity (including filter): 4.5 US qt (4.3 )
Reinstall the engine oil fill cap. Start the engine. The oil pressure indicator should go out within 5
seconds. If it does not, turn off the engine and check your work.Improper disposal of engine oil can be harmf ul to the environment. If you change your own oil, please dispose of the used oil properly. Put it in a sealed container, and take it to a recycling center. Do not discard it in a trash bin or dump it on the ground.
OIL FILTER
3.
Remove the oil filter, and let the remaining oil drain. A special wrench (available from your dealer) is required.
Make sure the oil filter gasket is not stuck to the contacting surface of the engine. If it is, remove it before installing a new oil filter.
460
11/07/20 19:00:43 31SJA670_466
Adding Engine Coolant
RESERVE TANK
If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks.
Engine Coolant
If the reserve tank is completely empty, you should also check the coolant level in the radiator.
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator cap.
Always use Honda Long-life Anti- freeze/Coolant Type 2. This coolant is pre-mixed with 50 percent antifreeze and 50 percent distilled water. Never add straight antifreeze or plain water.
If Honda antifreeze/coolant is not available, you may use another major-brand non-silicate coolant as a temporary replacement. Make sure it is a high-quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.
CONTINUED
461
11/07/20 19:00:50 31SJA670_467
Engine Coolant
LID
RADIATOR CAP
1.
Lift up the lid on the front bulkhead cover from the front.
2.
When the radiator and engine are cool, relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without pressing down.
3.
Remove the radiator cap by pushing down and turning counterclockwise.
462
4.
The coolant level should be up to the base of the filler neck. Add coolant if it is low.
Pour the coolant slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment.
5.
Put the radiator cap back on, and tighten it fully.
11/07/20 19:00:58 31SJA670_468
RESERVE TANK
6.
Pour coolant into the reserve tank. Fill it to halfway between the MAX and MIN marks. Put the cap back on the reserve tank.
7.
Reinstall the lid.
Engine Coolant, Windshield Washers
Do not add any rust inhibitors or other additives to your vehicle’s cooling system. They may not be compatible with the coolant or engine components.
Windshield Washers Check the fluid level in the windshield washer reservoir at least monthly during normal use. If the washer fluid is low, a ‘‘WASHER FLUID LOW’’ message appears on the multi-information display.
Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather.
CONTINUED
463
11/07/20 19:01:04 31SJA670_469
Windshield Washers, Automatic Transmission Fluid
When you refill the reservoir, clean the edges of the windshield wiper blades with windshield washer fluid on a clean cloth. This will help to condition the blade edges.
Do not use engine antif reeze or a vinegar/water solution in the windshield washer reservoir. Antif reeze can damage your vehicle’s paint, while a vinegar/water solution can damage the windshield washer pump. Use only commercially-available windshield washer f luid.
Automatic Transmission Fluid Check the fluid level with the engine at normal operating temperature.
1.
Park the vehicle on level ground. Start the engine, let it run until the radiator fan comes on, then shut off the engine. For accurate results, wait about 60 seconds (but no longer than 90 seconds) before doing step 2.
DIPSTICK
2.
Remove the dipstick (yellow loop) from the transmission, and wipe it with a clean cloth.
464
11/07/20 19:01:13 31SJA670_470
GUIDE
UPPER MARK LOWER MARK
3.
Insert the dipstick all the way into the transmission as shown.
4.
5.
Remove the dipstick and check the fluid level. It should be between the upper and lower marks.
If the level is below the lower mark, add fluid into the dipstick hole to bring it to the level between the upper and lower marks.
Automatic Transmission Fluid
Pour the fluid slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment.
Always use Acura ATF DW-1
(automatic transmission fluid).Use only Acura ATF DW-1 (automatic transmission f luid). Do not mix with other transmission f luids. Using transmission f luid other than Acura ATF DW-1 may cause deterioration in transmission operation and durability, and could result in damage to the transmission. Damage resulting f rom the use of transmission f luid other than Acura ATF DW-1 is not covered by the Acura new vehicle warranty.
6.
Insert the dipstick all the way back into the transmission securely as shown in the illustration.
Make sure the rubber cap on the dipstick fits in the dipstick guide and that you push the dipstick in all the way.
The transmission should be drained and refilled with new fluid when this service is shown by a maintenance message on the multi-information display.
If you are not sure how to add fluid, contact your dealer.
465
11/07/20 19:01:21 31SJA670_471
Brake Fluid
Check the brake fluid level in the reservoirs monthly.
To check the fluid level, remove the left engine compartment cover (see page
457
).
Independent of the Maintenance Minder information, replace the brake fluid every 3 years.
466
Always use Honda Heavy Duty Brake Fluid DOT 3. If it is not available, you should use only DOT 3
or DOT 4 fluid, from a sealed container, as a temporary replacement.Using any non-Honda brake fluid can cause corrosion and decrease the life of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.
Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage.
MAX
MIN
The fluid level should be between the MIN and MAX marks on the side of the reservoir. If the level is at or below the MIN mark, your brake system needs attention. Have the brake system inspected for leaks or worn brake pads.
11/07/20 19:01:30 31SJA670_472
Power Steering Fluid
UPPER LEVEL
LOWER LEVEL
),
After removing the right engine compartment cover (see page 457
check the level on the side of the reservoir when the engine is cold. The fluid should be between the UPPER LEVEL and LOWER LEVEL. If not, add power steering fluid to the UPPER LEVEL mark.Power Steering Fluid, Timing Belt
Pour the fluid slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment.
Always use Acura Power Steering Fluid. You may use another power steering fluid as an emergency replacement, but have the power steering system flushed and refilled with Acura PSF as soon as possible.
A low power steering fluid level can indicate a leak in the system. Check the fluid level frequently, and have the system inspected as soon as possible.
Turning the steering wheel to f ull lef t or right lock and holding it there can damage the power steering pump.
Timing Belt The timing belt should be replaced according to the Maintenance Minder
(see page
454
).
TM
Replace the timing belt every 60,000
miles (100,000 km) if you regularly drive your vehicle in any of the following conditions:In very high temperatures (over 110°F, 43°C).
In very low temperatures (under 29°C).
20°F,
−
−
If you frequently tow a trailer.
467
11/07/20 19:01:37 31SJA670_473
Lights
Headlight Aiming Your vehicle is equipped with an automatic headlight adjusting system that adjusts the vertical angle of the headlights automatically. Refer to page information.
for more
145
The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the trunk or pull a trailer, readjustment may be required. Adjustments should be done by your dealer or another qualified technician.
468
Low Beam Headlight Bulb Replacement The low beam headlight bulbs are high voltage discharge tube bulbs. High voltage can remain in the circuit even with the light switch off and the key removed. Because of this, you should not attempt to examine or change a low beam headlight bulb yourself. If a low beam headlight bulb fails, take the vehicle to your dealer to have it replaced.
Replacing a High Beam Headlight/Daytime Running Light Bulb Your vehicle has halogen high beam headlight bulbs which are also used for the daytime running light. Handle it by its base and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
11/07/20 19:01:48 31SJA670_474
1.
Open the hood.
BULB
2.
Remove the left or right side engine compartment cover from the side you are working on by carefully pulling the cover out (see page
457
).
If you are replacing the bulb on the driver’s side, remove the battery cover (see page ). 492
CONNECTOR
3.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
4.
Remove the bulb by turning it one- quarter turn counterclockwise.
Lights
5.
6.
Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place.
Push the electrical connector back onto the bulb. Make sure it is on all the way.
7.
Turn on the headlights to test the new bulb.
8.
Reinstall the engine compartment side cover.
9.
(Driver’s side) Reinstall the battery cover.
469
11/07/20 19:01:59 31SJA670_475
Lights
Replacing a Front Turn Signal Light Bulb 1.
Open the hood.
BULB
SOCKET
2.
Remove the left or right side engine compartment cover from the side you are working on by carefully pulling the cover out (see page
457
).
If you are replacing the bulb on the driver’s side, remove the battery cover (see page ). 492
3.
Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.
4.
Push the bulb in slightly, and turn it counterclockwise.
470
5.
Install the new bulb into the socket.
6.
Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place.
7.
Turn on the lights to make sure the new bulb is working.
8.
Reinstall the engine compartment side cover.
9.
(Driver’s side) Reinstall the battery cover.
11/07/20 19:02:13 31SJA670_476
Replacing a Front Parking/Side Marker Bulb 1.
Open the hood.
SOCKET
2.
Remove the left or right side engine compartment cover (see page
457
).
BULB
If you are replacing the bulb on the driver’s side, remove the battery cover (see page ). 492
3.
(Passenger’s side) Use a flat-tip screwdriver to remove the holding clip from the windshield washer reservoir.
CLIP
4.
Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.
Lights
6.
Install the new bulb into the socket.
7.
Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place.
8.
Turn on the lights to make sure the new bulb is working.
9.
(Passenger’s side) Reinstall the windshield washer reservoir.
Reinstall the engine compartment side cover.
5.
Pull the bulb straight out of its socket.
10.
(Driver’s side) Reinstall the battery cover.
471
11/07/20 19:02:22 31SJA670_477
Lights
Replacing a Fog Light Bulb Your vehicle uses halogen light bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
The fog lights were properly aimed when your vehicle was new. If you regularly carry heavy items in the trunk or pull a trailer, readjustment may be required. Adjustment should be done by your dealer or another qualified technician.
472
BOLTS
BULB
CLIP
CONNECTOR
1.
Use a Phillips-head screwdriver to remove the two undercover bolts, and remove the holding clip with a flat-tip screwdriver.
3.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
2.
Carefully push up the side under cover into the bumper.
4.
Remove the bulb by turning it one- quarter turn counterclockwise.
11/07/20 19:02:33 31SJA670_478
5.
6.
Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place.
Push the electrical connector back onto the bulb. Make sure it is on all the way.
7.
Turn on the fog lights to test the new bulb.
8.
Reinstall the two undercover bolts on the side under cover and tighten them securely. Put the holding clip back on the side undercover and push on the center until it locks (the center is flush with the head).
Replacing a Rear Turn Signal Light Bulb
Lights
BOLTS
MOUNTING NUT
MAINTENANCE LID
TAIL LIGHT TRIM
1.
Open the trunk lid, and remove the left or right maintenance lid.
2.
Remove the mounting nut with an 8 mm wrench.
3.
Carefully pry in the top or bottom edge of the trim with a small flat- tip screwdriver, and pull the trim straight back.
4.
Remove the two mounting bolts with an 8 mm wrench.
5.
Pull the taillight assembly straight back out of the body.
CONTINUED
473
11/07/20 19:02:42 31SJA670_479
Lights
BULB
SOCKET
6.
Remove the socket by turning it one-quarter turn counterclockwise.
7.
Remove the burned out bulb by pulling it straight out of its socket.
474
8.
9.
Install the new bulb in the socket by pushing it straight in the socket until it bottoms.
Reinstall the socket into the light assembly. Turn it clockwise to lock it in place.
10.
Test the lights to make sure the new bulb is working.
11.
When reinstalling the taillight assembly, align and pop the snap fasteners in place. Tighten the two mounting bolts and reinstall the trim in place.
12.
Tighten the mounting nut securely, and reinstall the maintenance lid.
Replacing a Back-up Light Bulb
COVERS
1.
Open the trunk.
2.
Remove the light assembly cover by pulling its outside edge.
11/07/20 19:02:52 31SJA670_480
BULB
5.
Reinstall the socket into the light assembly. Turn it clockwise to lock it in place.
6.
Test the lights to make sure the new bulb is working.
7.
Reinstall the back-up light cover.
SOCKET
3.
4.
Remove the socket from the light assembly by turning it one-quarter turn counterclockwise.
Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms.
Lights
Side Turn Signal Lights Each outside mirror has side turn signal lights. The lights should be replaced by your dealer.
High-mount Brake Light This light should be replaced by your dealer.
Rear License Plate Light Bulbs The license plate has two lights above it. The bulbs should be replaced by your dealer.
475
11/07/20 19:02:58 31SJA670_481
Dust and Pollen Filter, Cleaning the Seat Belts
Cleaning the Seat Belts
OPENING
Dirt build-up around the openings of the seat belt anchors can cause the belts to retract slowly. Wipe the openings with a clean cloth dampened in mild soap and warm water or isopropyl alcohol.
If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air-dry before you use the vehicle.
Dust and Pollen Filter This filter removes the dust and pollen that is brought in from the outside through the climate control system.
Have your dealer replace the filter when this service is indicated by a maintenance message on the multi- information display. It should be replaced every 15,000 miles (24,000
km) if you drive primarily in urban areas that have high concentrations of soot in the air, or if the flow from the climate control system becomes less than usual.476
11/07/20 19:03:05 31SJA670_482
DRIVER’S SIDE FLOOR MAT
If you remove a floor mat, make sure to re-anchor it when you put it back in your vehicle.
If you use non-Acura floor mats, make sure they fit properly and that they can be used with the floor mat anchors. Do not put additional floor mats on top of the anchored mats.
Unlock
Lock
ANCHORS
The floor mats that came with your vehicle hook over the floor mat anchors. This keeps the floor mats from sliding forward (possibly interfering with the pedals), or backwards (making the front passenger’s weight sensors ineffective).
To lock or unlock each anchor, turn the knob.
Floor Mats
