Download PDF Manual


2.


3.


5.


Follow the HFL prompts to complete the edit.


Say ‘‘


Delete


’’ after the prompts.


Say the name you want to delete and follow the HFL prompts to complete the deletion.


Avoid using ‘‘home’’ as a name entry.


It is easier for HFL to recognize a multisyllabic or longer name. For example, use ‘‘Peter’’ instead of ‘‘Pete,’’ or ‘‘John Smith’’ instead of ‘‘John.’’


368


11/07/20 18:48:32 31SJA670_374


Tolistallnamesinthephonebook: Press and release the HFL Talk button before a command.


1.


Say ‘‘


Phonebook


.’’


2.


Say ‘‘


List


’’ after the prompts.


3.


HFL begins reading the names in the order they were stored.


4.


If you hear a name you want to call, immediately press the HFL Talk button and say ‘‘


Call


.’’


Tostoreaspecificphonenumber fromyourcellphonedirectlytothe HFLphonebook(availableonsome phones): Press and release the HFL Talk button before a command.


1.


Say ‘‘


Phonebook


.’’


2.


3.


4.


Receive contact


Say ‘‘ prompts.


’’ after the


Follow the HFL prompts, select a number from your cell phone, and send it to HFL.


Follow the HFL prompts and name the number, or say Discard ‘‘ you want to store.


’’ if it is not the number


5.


Follow the HFL prompts if you want to store another number.


Bluetooth HandsFreeLink


Cellular Phonebook (availableonsomephones)


Cellular Phone


If you select from the Information screen menu, you will see five HFL options.


For a list of cell phones that are compatible with this feature:


In the U.S., visit handsfreelink


www.acura.com/


, or call (888) 528-7876.


In Canada, visit or call (888) 528-7876.


www.handsfreelink.ca,


CONTINUED


369


11/07/20 18:48:42 31SJA670_375


Bluetooth HandsFreeLink


ImportCellularPhonebook: The entire phonebook data of the cell phone that is linked to HFL can be imported to the navigation system.


SearchImportedPhonebook: Once a phonebook has been imported, you can search the phone numbers by the person’s name.


IMPORTED DATE


PIN ICON


IMPORTED PHONEBOOK


If the phonebook is PIN-protected, you will need to enter the 4-digit PIN.


Search Imported


Select ‘‘ Phonebook phonebooks will be displayed.


,’’ and a list of imported


Select a phonebook from the list.


Import Cellular


Select ‘‘ Phonebook ,’’ and HFL will begin importing the phonebook. Select OK ‘‘


’’ after the import is completed.


370


11/07/20 18:48:55 31SJA670_376


Push up the interface selector to show a list.


Select a person from the list. Up to three category icons are displayed in the left side of the list:


DeleteImportedPhonebook: You can delete any imported phonebook.


Bluetooth HandsFreeLink


To search for a specific name in the phonebook, enter the keyword for either the first or last name.


To display all names in the List phonebook, select the ‘‘


’’ option.


Fax


Car


Voice


Other


Preference


Home


Mobile


Work


Pager


These indicate how many numbers are stored for the name. If a name has more than three category icons, ‘‘…’’ is displayed.


Select the person’s number you want to call, and press the HFL Talk button.


Delete Imported


Select ‘‘ Phonebook phonebooks will be displayed.


,’’ and a list of imported


Select a phonebook you want to delete. If the phonebook is PIN- protected, you will need to enter the 4-digit PIN number.


CONTINUED


371


11/07/20 18:49:05 31SJA670_377


Bluetooth HandsFreeLink


After making a selection, the following screen will appear.


PIN Number You can add, change, or remove a PIN number from any phonebook.


TochangethePINtoanewnumber:


Yes Select ‘‘ the deletion.


,’’ then ‘‘


OK


’’ to complete


ToaddaPIN: If you have selected a phonebook without a PIN, you will see the above display.


Enter the new 4-digit PIN. You will have to re-enter the PIN for confirmation.


Select the phonebook you want. The display will change as shown above.


Enter the current PIN for this phonebook.


372


PIN number


ToremoveaPIN: Select ‘‘ Do not use PIN ‘‘ the current PIN.


,’’ then select ’’ after you enter


11/07/20 18:49:12 31SJA670_378


The display will change as shown above.


Enter the new 4-digit PIN number. You will be asked to re-enter the PIN for verification.


Bluetooth HandsFreeLink


System Setup This command group allows you to change or customize HFL basic settings.


CONTINUED


373


Tochangeyoursecuritypasscode: Press and release the HFL Talk button before a command.


1.


2.


Say ‘‘


System setup


.’’


Change passcode


’’ after the


Say ‘‘ prompts.


3.


Follow the HFL prompts and say the new 4-digit passcode.


4.


Follow the HFL prompts to confirm the number.


11/07/20 18:49:25 31SJA670_379


Bluetooth HandsFreeLink


Toseta4-digitpasscodetolockthe HFLsystemforsecuritypurposes: Press and release the HFL Talk button before a command.


1.


Say ‘‘


System setup


.’’


2.


Say ‘‘


Security


’’ after the prompts.


3.


Follow the HFL prompts and say the 4-digit passcode you want to set.


4.


Follow the HFL prompts to confirm the number.


Once a passcode is set, you NOTE: will need to enter it to use HFL each time you start the vehicle. If you forget the code, your dealer will have to reset it for you, or you will have to clear the entire system (see page 375


).


374


Toselecteitheraringtoneora promptastheincomingcall notification : Press and release the HFL Talk button before a command.



1.


2.


3.


Say ‘‘


System setup


.’’


Call notification


’’ after the


Say ‘‘ prompts.


Follow the HFL prompts and say Ring tone Prompt ‘‘ .’’ You ’’ for no audible can also say ‘‘ incoming call notification.


’’ or ‘‘ Off



The default setting is a ring tone.


11/07/20 18:49:38 31SJA670_380


Toactivateordeactivatetheauto transferfunction: If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL with the ignition switch in the ACCESSORY (I) or ON (II) position.


Press and release the HFL Talk button before a command.


1.


2.


3.


Say ‘‘


System setup


.’’


Auto transfer


Say ‘‘ prompts.


’’ after the


HFL will let you know if auto transfer is on or off, depending on the previous setting. Follow the HFL prompts to change the setting.


Bluetooth HandsFreeLink


Toclearthesystem: This operation clears the passcodes, paired phones, all names in the HFL phonebook, and all imported phonebook data.


Quick Language Selection Canadianmodelsonly Toquicklychangethelanguage: Press and release the HFL Talk button before a command.


Press and release the HFL Talk button before a command.


1.


Say the language you want to change to in that language.


1.


Say ‘‘


System setup


.’’


2.


Follow the HFL prompts.


2.


Say ‘‘


Clear


’’ after the prompts.


3.


Follow the HFL prompts to continue to complete the clearing procedure.


You can also clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say ‘‘ clear the HFL phonebook and all imported phonebook data will be lost.


System .’’ Paired phones, all names in


375


11/07/20 18:49:50 31SJA670_381


Bluetooth HandsFreeLink


Change Language Canadianmodelsonly Tochangethesystemlanguage betweenEnglishandFrench: Press and release the HFL Talk button before a command.


1.


2.


Say ‘‘


Change language


.’’


Follow the HFL prompts to change the language to English or French.


If you have not named your paired phone in the language you just selected, HFL will ask you to name it in the current language.


When French is your currently selected language, you can give voice commands in French.


376


Bluetooth


Wireless Technology name and logos are


Bluetooth The registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honda Motor Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.


HFL Limitations An incoming call on HFL will Audio when it is interrupt playing. Audio will resume when the call is ended.


Bluetooth


U.S.modelsonly In addition, you cannot use HFL while using AcuraLink.


AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.


Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.


ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.


11/07/20 18:50:00 31SJA670_382


Ifequipped Your vehicle has a backup sensor system. This system lets you know the approximate distance between your vehicle and most obstacles with an audible signal while you are parking.


The sensors are installed in the rear bumper. There are two corner sensors, one on each side, and two center sensors in the middle of the rear bumper.


Operation The system is activated and a beeper sounds once when you put the transmission into reverse. As your vehicle is nearing an obstacle, the system makes the audible signal to let you know the approximate distance between your vehicle and the obstacle. If there are more than two obstacles around the rear bumper, the system informs you of the nearest obstacle’s distance from the rear bumper.


All obstacles may not always be sensed. Even with this system, you should look for obstacles near your vehicle to make sure it is safe to park.


Backup Sensor System


The beeping changes according to the distance between the rear bumper and an obstacle:


Distance from the Bumper


Signal


Short beeps


Very short


beeps


Continuous


beeps


Corner Sensors Within 24 in


(60 cm) Within 16 in


(40 cm) Within 10 in


(25 cm)


Center Sensors Within 59 in


(150 cm) Within 39 in


(100 cm) Within 20 in


(50 cm)


CONTINUED


377


11/07/20 18:50:09 31SJA670_383


Backup Sensor System


The system may not function properly under these conditions:


The sensors are covered with snow, ice, mud, etc.


When the vehicle is on a rough road, on grass, or on a hill.


After the vehicle has been sitting out in hot or cold weather.


When the system is affected by some electrical equipment or devices generating an ultrasonic wave.


When operating the vehicle in bad weather.


Within about 24 in (60 cm)


Within about 59 in (150 cm)


The range of the corner sensors and the rear center sensors are limited. Each corner sensor is capable of sensing an obstacle within about 24
in (60 cm).


The rear center sensors sense an obstacle within about 59 in (150 cm).


Do not put any accessories on or around the sensors.


378


11/07/20 18:50:14 31SJA670_384


Backup Sensor System


The system may not sense thin or low objects, or sonic-absorptive materials such as snow, cotton, or sponge.


The system cannot sense objects directly under the bumper.


If a beeper sounds several times or does not sound when you put the transmission into reverse, there is a problem with the backup sensor system. You should have the system checked by your dealer.


CanadianOwners: ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.


ThisISMdevicecomplieswithCanadian ICES-001.


379


11/07/20 18:50:18 31SJA670_385


Rearview Camera and Monitor


Ifequipped Refer to the navigation system manual for operation of the rearview camera.


380


11/07/20 18:50:22 31SJA670_386


Before Driving


Before you begin driving your vehicle, you should know what gasoline to use and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. The information in this section will help you. If you plan to add any accessories to your vehicle, please read the information in this section first.


Break-in Period Fuel Recommendation Service Station Procedures


............................. ................. ......... .................................... .....


Refueling Tighten Fuel Cap Message Opening and Closing


. 382
. 382
. 383
. 383
. 385


the Hood


Oil Check Engine Coolant Check


. 385
. 387
. 387
Fuel Economy . 388
Accessories and Modifications . 391
Carrying Cargo . 393


................................ ................................... ............. ............................... ... .............................


381


11/07/20 18:50:31 31SJA670_387


Break-in Period, Fuel Recommendation


Break-in Period Help assure your vehicle’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period:


Avoid full-throttle starts and rapid acceleration.


Avoid hard braking for the first 200 miles (300 km).


Do not change the oil until the multi-information display indicates it is needed.


Do not tow a trailer.


You should also follow these recommendations with an overhauled or exchanged engine, or when the brakes are replaced.


382


Fuel Recommendation Your vehicle is designed to operate on premium unleaded gasoline with a pump octane of 91 or higher. If this octane grade is unavailable, regular unleaded gasoline with a pump octane of 87 or higher may be used temporarily. The use of regular unleaded gasoline can cause metallic knocking noises in the engine and will result in decreased engine performance. The long-term use of regular-grade gasoline can lead to engine damage.


We recommend quality gasolines containing detergent additives that help prevent fuel system and engine deposits.


We recommend quality gasoline containing detergent additives that help prevent f uel system and engine deposits. In addition, in order to maintain good perf ormance, f uel economy, and emissions control, we strongly recommend the use of gasoline that does NOT contain harmf ul manganese- based f uel additives such as MMT, if such gasoline is available. Use of gasoline with these additives may adversely af f ect perf ormance, and cause the malf unction indicator lamp on your instrument panel to come on. If this happens, contact your dealer f or service. Some gasoline today is blended with oxygenates such as ethanol. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume. Do not use gasoline containing methanol. If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.


11/07/20 18:50:38 31SJA670_388


Because the level of detergency and additives in gasoline vary in the market, Honda endorses the use of ‘‘TOP TIER Detergent Gasoline’’ where available to help maintain the performance and reliability of your vehicle. TOP TIER Detergent Gasoline meets a new gasoline standard jointly established by leading automotive manufacturers to meet the needs of today’s advanced engines. Qualifying gasoline retailers will, in most cases, identify their gasoline as having met ‘‘TOP TIER Detergent Gasoline’’ standards at the retail location. This fuel is guaranteed to contain the proper level of detergent additives and be free of metallic additives. The proper level of detergent additives, and absence of harmful metallic additives in gasoline, help avoid build-up of deposits in your engine and emission control system.


For further important fuel-related information for your vehicle, or on information on gasoline that does not contain MMT, visit My Acura at . In Canada, visit owners.acura.com www.acura.ca information on gasoline. For more information on top tier gasoline, visit www.toptiergas.com


for additional


Service Station Procedures


Refueling


FUEL FILL DOOR RELEASE BUTTON


1.


Park with the driver’s side closest to the service station pump.


2.


Open the fuel fill door by pressing the button in the driver’s door (to open the fuel fill door manually, see page


511


).


CONTINUED


383


11/07/20 18:50:45 31SJA670_389


Service Station Procedures


3.


4.


Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.


Stop the engine, and keep heat, sparks, and flames away. Handle fuel only outdoors. Wipe up spills immediately.


FUEL FILL CAP


TETHER


384


Screw the fuel fill cap back on until it clicks at least once. If you do not properly tighten the cap, you will see a ‘‘TIGHTEN FUEL CAP’’ message on the multi- information display, and the malfunction indicator lamp may also come on (see page


509


).


6.


Push the fuel fill door closed until it latches.


Remove the fuel fill cap slowly. You may hear a hissing sound as pressure inside the tank equalizes. Place the cap in the holder on the fuel fill door.


5.


Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank. This leaves some room in the fuel tank for the fuel to expand with temperature changes.


If the fuel nozzle keeps clicking off even though the tank is not full, there may be a problem with your vehicle’s fuel vapor recovery system. The system helps keep fuel vapor from going into the atmosphere. Try filling at another pump. If this does not fix the problem, consult your dealer.


11/07/20 18:50:52 31SJA670_390


Tighten Fuel Cap Message


replace the fuel fill cap. To scroll to another message, press the INFO button. The ‘‘TIGHTEN FUEL CAP’’ message will appear each time you restart the engine until the system turns the message off.


If the system still detects a leak in the vehicle’s evaporative emissions system, the malfunction indicator lamp (MIL) comes on. If the fuel fill cap was not already tightened, turn the engine off, and check or retighten the fuel fill cap until it clicks at least once. The MIL should go off after several days of normal driving once the cap is tightened or replaced. If the MIL does not go off, have your vehicle inspected by a dealer. For more information, see page


509


Your vehicle’s on board diagnostic system will detect a loose or missing fuel fill cap as an evaporative system leak. The first time a leak is detected a ‘‘TIGHTEN FUEL CAP’’ message appears on the multi-information display. Turn the engine off, and confirm the fuel fill cap is installed. If it is, loosen it, then retighten it until it clicks at least once. The message should go off after several days of normal driving once you tighten or


Service Station Procedures


Opening and Closing the Hood


HOOD RELEASE LEVER


1.


Park the vehicle, and set the parking brake. Pull the hood release lever located under the lower left corner of the dashboard. The hood will pop up slightly.


CONTINUED


385


11/07/20 18:50:58 31SJA670_391


Service Station Procedures


LATCH


3.


Lift the hood up most of the way. The hydraulic supports will lift it up the rest of the way and hold it up.


2.


Reach between the hood and the front bumper with your finger. Slide the latch handle up.


If the hood latch handle moves stiffly, or if you can open the hood without lifting the handle, the mechanism should be cleaned and lubricated.


386


To close the hood, lower the hood to about a foot (30 cm) above the fender, then firmly press down on the front edge of the hood. Make sure it is securely latched.


11/07/20 18:51:09 31SJA670_392


Oil Check


DIPSTICK


UPPER MARK


LOWER MARK


Wait a few minutes after turning the engine off before you check the oil.


1.


Remove the dipstick (orange loop).


4.


Remove the dipstick again, and check the level. It should be between the upper and lower marks.


2.


Wipe the dipstick with a clean cloth or paper towel.


3.


Insert the dipstick all the way back into its hole.


If it is near or below the lower Adding Engine Oil mark, see page 458


on


Service Station Procedures


Engine Coolant Check


RESERVE TANK


MAX MIN


Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If Adding it is below the MIN line, see Engine Coolant for 461
information on adding the proper coolant.


on page


Owner’s Maintenance on page


Refer to Checks for information about checking other items on your vehicle.


452


387


11/07/20 18:51:18 31SJA670_393


Fuel Economy


Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits, and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments.


The EPA fuel economy estimates shown in the example to the right are a useful tool for comparison when buying a vehicle. EPA estimates include:



City MPG Represents urban driving in light traffic. A range of miles per gallon achieved is also provided.



Represents a


Highway MPG mixture of rural and interstate driving, in a warmed-up vehicle, typical of longer trips in free-flowing traffic. A range of miles per gallon


388


City MPG


Highway MPG


Combined Fuel Economy


Estimated Annual Fuel Cost


(Sample U.S. EPA label shown)


achieved is also provided.



Combined Fuel Economy Represents a combination of city and highway driving. The scale represents the range of combined fuel economy for other vehicles in the class.


Estimated Annual Fuel Cost − Provides an estimated annual fuel cost, based on 15,000 miles (20,000
km) per year multiplied by the cost


per gallon (based on EPA fuel cost data) divided by the combined fuel economy.


For more information on fuel economy ratings and factors that affect fuel economy, visit fueleconomy.gov vehicles.gc.ca


www. (Canada: Visit


www.


11/07/20 18:51:31 31SJA670_394


Fuel Economy Factors The following factors can lower your vehicle’s fuel economy:


Aggressive driving (hard acceleration and braking) Excessive idling, accelerating and braking in stop-and-go traffic Cold engine operation (engines are more efficient when warmed up) Driving with a heavy load or the air conditioner running Improperly inflated tires


Improving Fuel Economy


VehicleMaintenance A properly maintained vehicle maximizes fuel economy. Poor maintenance can significantly reduce fuel economy. Always maintain your vehicle according to the maintenance messages displayed on the multi- Owner’s information display (see Maintenance Checks on page 452


).


For example:


).


Use the recommended viscosity motor oil, displaying the API Certification Seal (see page 458
Maintain proper tire inflation An underinflated tire increases − ‘‘rolling resistance,’’ which reduces fuel economy. Avoid carrying excess weight in your vehicle It puts a heavier load on the engine, increasing fuel consumption. Keep your vehicle clean In particular, a build-up of snow or mud on your vehicle’s underside adds weight and rolling resistance. Frequent cleaning helps your fuel economy.




Fuel Economy


DriveEfficiently




Rapid


Drive moderately acceleration, abrupt cornering, and hard braking increase fuel consumption. Observe the speed limit Aerodynamic drag has a big effect on fuel economy at speeds above 45 mph (75 km/h). Reduce your speed and you reduce the drag. Trailers, car top carriers, roof racks and bike racks are also big contributors to increased drag. Avoid excessive idling Idling results in 0 miles per gallon (0 kms per liter).



CONTINUED


389


11/07/20 18:51:40 31SJA670_395


Fuel Economy



The A/C


Minimize the use of the air conditioning system puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible. Plan and combine trips Combine several short trips into one. A warmed-up engine is more fuel efficient than a cold one.



Calculating Fuel Economy


MeasuringTechniques Direct calculation is the recommended source of information about your actual fuel economy. Using frequency of fill-ups or taking fuel gauge readings are NOT accurate measures of fuel economy. Fuel economy may improve over the first several thousand miles (kilometers).


390


CheckingYourFuelEconomy


Miles driven


Gallons of fuel


Miles per Gallon


100


Liter


Kilometers


L per 100 km


1) 2) 3) 4)


Fill the fuel tank until the nozzle automatically clicks off. Reset trip counter to zero. Record the total gallons (liters) needed to refill. Follow one of the simple calculations above.


11/07/20 18:51:49 31SJA670_396


Accessories and Modifications


Modifying your vehicle, or installing non-Acura accessories, may make your vehicle unsafe. Before you make any modifications or add any accessories, be sure to read the following information.


Accessories Your dealer has Acura accessories that allow you to personalize your vehicle. These accessories have been designed and approved for your vehicle, and are covered by warranty.


Although non-Acura accessories may fit on your vehicle, they may not meet factory specifications, and could adversely affect your vehicle’s handling, stability, and reliability.


Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be hurt or killed.


Follow all instructions in this owner’s manual regarding accessories and modifications.


When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your vehicle’s computer controlled systems, such as your airbags, anti-lock brakes, and tire pressure monitoring system.


Before installing any accessory:


Make sure the accessory does not obscure any lights, or interfere with proper vehicle operation or performance.


Be sure electronic accessories do not overload electrical circuits (see page the proper operation of your vehicle.


) or interfere with


512


Before installing any electronic accessory, have the installer contact your dealer for assistance. If possible, have your dealer inspect the final installation.


Do not install accessories on the side pillars or across the rear windows. Accessories installed in these areas may interfere with proper operation of the side curtain airbags.


391


11/07/20 18:51:57 31SJA670_397


Accessories and Modifications


Modifying Your Vehicle Removing parts from your vehicle, or replacing components with non- Acura components could seriously affect your vehicle’s handling, stability, and reliability.


Some examples are:


Lowering the vehicle with a non- Acura suspension kit that significantly reduces ground clearance can allow the undercarriage to hit speed bumps or other raised objects, which could cause the airbags to deploy.


Raising your vehicle with a non- Acura suspension kit can affect the handling, stability, and reliability.


Non-Acura wheels, because they are a universal design, can cause excessive stress on suspension components and will not be compatible with the tire pressure monitoring system (TPMS).


Larger or smaller wheels and tires can interfere with the operation of your vehicle’s anti-lock brakes and other systems.


Modifying your steering wheel or any other part of your vehicle’s safety features can make the systems ineffective.


If you plan to modify your vehicle, consult your dealer.


392


11/07/20 18:52:05 31SJA670_398


CONSOLE COMPARTMENT


FRONT DOOR POCKET


CENTER POCKET


TRUNK


SEAT-BACK POCKETS


GLOVE BOX


Carrying Cargo


Your vehicle has several convenient storage areas:


Glove box Front door and seat-back pockets Console compartment Center pocket Trunk


In addition, the trunk pass-through allows you to carry longer items.


However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.


393


11/07/20 18:52:17 31SJA670_399


Carrying Cargo


Load Limits The maximum load for your vehicle is 850 lbs (385 kg).


See Tire And Loading Information label attached to the driver’s doorjamb.


Label Example


This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.


394


Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.


Follow all load limits and other loading guidelines in this manual.



Steps for Determining Correct Load Limit (1)


Locate the statement ‘‘The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.’’ on your vehicle’s placard.


(2)


Determine the combined weight of the driver and passengers that will be riding in your vehicle.


(3)


Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.


(4)


The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the ‘‘XXX’’ amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400


150) = 650 lbs.)


750 (5



×


(5)


Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.


(6)


If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.


11/07/20 18:52:23 31SJA670_400


Example 1


Example 2


Example 3


Max Load 850 lbs (385 kg)


Passenger Weight 150 lbs x 2 = 300 lbs (68 kg x 2 = 136 kg)


Cargo Weight 550 lbs (249 kg)


Max Load 850 lbs (385 kg)


Passenger Weight 150 lbs x 4 = 600 lbs (68 kg x 4 = 272 kg)


Cargo Weight 250 lbs (113 kg)


Max Load 850 lbs (385 kg)


Passenger Weight 150 lbs x 5 = 750 lbs (68 kg x 5 = 340 kg)


Cargo Weight 100 lbs (45 kg)


Carrying Cargo


In addition, the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver’s doorjamb.


395


11/07/20 18:52:31 31SJA670_401


Carrying Cargo


Carrying Items in the Passenger Compartment


Store or secure all items that could be thrown around and hurt someone during a crash.


Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.


Do not put any items on top of the rear shelf. They can block your view and be thrown around the vehicle during a crash.


Be sure items placed on the floor behind the front seats cannot roll underneath and interfere with the proper operation of the seats, the sensors under the seats, or the driver’s ability to operate the pedals.


Keep all cargo below the bottom of the windows. If it is higher, it could interfere with the proper operation of the side curtain airbags.


396


Carrying Cargo in the Trunk or on a Roof Rack


Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible.


If you carry large items that prevent you from closing the trunk lid, exhaust gas can enter the passenger area. To avoid the possibility of poisoning on page 56


, follow the instructions


carbon monoxide


If you carry any items on a roof rack, be sure the total weight of the rack and the items does not exceed 121 lbs (55 kg).


If you use an accessory roof rack, the roof rack weight limit may be lower. Refer to the information that came with your roof rack.


11/07/20 18:52:37 31SJA670_402


If you carry any items extending through the trunk pass-through, tie down or secure all items that could be thrown around the vehicle and hurt someone during a crash or sudden stop.


Cargo Hooks


SIDE CARGO HOOKS


CARGO FLOOR HOOKS


Carrying Cargo


There are hooks on the floor and both sides of the trunk. They can be used to install the cargo net for securing items. The side cargo hooks are designed to hold light items (maximum load: 6 lbs or 3 kgs for each hook). Heavy objects may damage the side hooks.


The cargo floor hooks can also be used to tie down and secure items on the floor.


397


11/07/20 18:52:40 31SJA670_403


398


11/07/20 18:52:43 31SJA670_404


Driving


This section gives you tips on starting the engine under various conditions, and how to operate the automatic transmission. It also includes important information on parking your vehicle, the braking system, the Super Handling-All Wheel Drive the vehicle stability assist (VSA ) system, the tire pressure monitoring system (TPMS), the Collision mitigation braking system (CMBS ), and facts you need if you are planning to tow a trailer.


(SH-AWD ) system,


TM


TM


TM


Preparing to Drive Starting the Engine


........................ .......................


. 400
. 401


Check Starting System


Message


................................. ..............


. 402
. 403


Automatic Transmission Driving with the Paddle


Shifters


D-Paddle Shift Mode Sequential Shift Mode


................................... ................ .............. Super Handling-All Wheel Drive ................. ........................................... ............................. ...............


Parking Braking System Anti-lock Brakes (ABS) Collision Mitigation Braking


(SH-AWD ) System


. 407
. 407
. 409


TM


. 412
. 414
. 415
. 416


System (CMBS )


TM


TM


..................


. 418


Tire Pressure Monitoring


System (TPMS)


........................ Vehicle Stability Assist (VSA ),


. 429


aka Electronic Stability


Control (ESC), System


Towing a Trailer Towing Your Vehicle


........ ........................... ...................


. 435
. 437
. 442


399


11/07/20 18:52:53 31SJA670_405


Preparing to Drive


You should do the following checks and adjustments before you drive your vehicle.


1.


Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.


2.


Check that the hood is fully closed.


3.


4.


Visually check the tires. If a tire looks low, use a gauge to check its pressure.


Check that any items you may be carrying are stored properly or fastened down securely.


400


5.


6.


Check the seat adjustment (see page


156


).


Check the adjustment of the inside and outside mirrors (see page


161


).


7.


Check the steering wheel adjustment (see page 148


).


8.


9.


Make sure the doors and the trunk are securely closed and locked.


Fasten your seat belt. Check that your passengers have fastened their seat belts (see page ).


17


10.


When you start the engine, check the gauges and indicators in the instrument panel, and the messages on the multi-information display (see pages 78


and


61


70


).


11/07/20 18:53:01 31SJA670_406


Starting the Engine


Your vehicle’s starting system has an auto control mode. When you turn the ignition switch to the START (III) position, this feature keeps the engine’s starter motor running until the engine starts. Follow these instructions to start the engine:


1.


Apply the parking brake.


2.


In cold weather, turn off all electrical accessories to reduce the drain on the battery.


3.


Make sure the shift lever is in Park. Press on the brake pedal.


4.


Without touching the accelerator pedal, turn the ignition switch to the START (III) position, then release the ignition switch. You do not need to hold the ignition switch in the START (III) position to start the engine. Depending on the outside temperature, the starter motor runs for about 6 to 9
seconds until the engine starts.


If you hold the ignition switch in the START (III) position for more than 7 seconds, the starter motor, depending on the outside temperature, runs for about 10 to 25 seconds until the engine starts.


If the engine does not start, wait at least 10 seconds before trying again.


The immobilizer system protects your vehicle f rom thef t. If an improperly coded key (or other device) is used, the engine’s f uel system is disabled. For more inf ormation, see page


150


The engine is harder to start in cold weather. Also, the thinner air f ound at altitudes above 8,000 f eet (2,400
meters) adds to this problem.


401


If this message is on, the ignition switch has to be held in the START (III) position manually until the engine starts. The ignition switch can be held in that position up to 15 seconds.


Even though you may be able to start the engine manually without the auto control mode of the starting system, have your dealer inspect your vehicle.


11/07/20 18:53:06 31SJA670_407


Starting the Engine


Check Starting System Message


If there is a problem with the starting system, you will see a ‘‘CHECK STARTING SYSTEM’’ message on the multi-information display when the ignition switch is turned to the ON (II) position. You will also see this message when the auto control mode of the starting system has a problem.


402


11/07/20 18:53:13 31SJA670_408


Shift Lever Position Indicators


These indicators in the tachometer show which position the shift lever is in.


GEAR POSITION INDICATOR on PADDLE SHIFT MODE


Using a paddle shift mode, the gear position indicator shows you the selected gear number (see page 407


).


Automatic Transmission


The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it flashes while driving (in any shift position), it indicates a possible problem in the transmission.


If the malfunction indicator lamp comes on along with the ‘‘D’’ indicator, there is a problem with the automatic transmission control system. Avoid rapid acceleration, and have the transmission checked by your dealer as soon as possible.


When the ‘‘D’’ indicator warns of a possible problem with the transmission, you will see a ‘‘CHECK TRANSMISSION’’ message on the multi-information display.


403


11/07/20 18:53:22 31SJA670_409


Automatic Transmission


Shifting


RELEASE BUTTON


To shift from Park to any position, press firmly on the brake pedal, and press the release button on the top of the shift lever, then move the lever. You cannot shift out of Park

Loading...
x