Download PDF Manual


Index


Continued


69


2013 RDX uuIndicatorsu


Indicator


Name


On/Blinking


Explanation


Message


Shift Lever Position Indicator


● Indicates current shift lever


position.


2 Shifting P. 244



● Blinks if the transmission system has


● Blinks while driving - Avoid sudden


a problem.


starts and acceleration and have the vehicle checked by a dealer immediately.


● Comes on when the manual


sequential shift mode is applied.


2 Sequential Shift Mode P. 246



Transmission Indicator


M (sequential shift mode) Indicator/Gear Position Indicator


QRG


TOC


Index


70


2013 RDX Indicator


Name


On/Blinking


Explanation


Message


uuIndicatorsu


● Comes on and the beeper sounds if


you are not wearing a seat belt when you set the power mode to ON.


● If the front passenger is not


wearing a seat belt, the indicator comes on about a few seconds later.


● The beeper stops and the indicator goes off when you and the front passenger fasten their seat belts.


● Stays on after you or the front


passenger has fastened the seat belt - A detection error may have occurred in the sensor. Have the vehicle checked by a dealer.


● Blinks while driving if either you or


2 Seat Belt Reminder P. 30


Seat Belt Reminder Indicator


the front passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals.


Low Fuel Indicator


● Comes on when the fuel reserve is


● Comes on - Refuel your vehicle as soon as


running low (approximately 2.5 U.S. gal./9.2 Liter left).


possible.


● Blinks - Have the vehicle checked by a


● Blinks if there is a problem with the


dealer.


fuel gauge.


ABS (Anti-lock Brake System) Indicator


● Comes on for a few seconds when


● Stays on constantly - Have the vehicle


you set the power mode to ON, then goes off.


● If it comes on at any other time, there is a problem with the ABS.


checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function.


2 ABS (Anti-lock Brake System) P. 259


QRG


TOC


Index


Continued


71


2013 RDX QRG


TOC


uuIndicatorsu


Indicator


Name


On/Blinking


Explanation


Message


Supplemental Restraint System Indicator


AWD (All-Wheel Drive) with Intelligent Control System Indicator *


● Stays on constantly or does not come on at all - Have the vehicle checked by a dealer.


● Comes on for a few seconds when


you set the power mode to ON, then goes off.


● Comes on if a problem with any of


the following is detected: - Supplemental restraint system - Side airbag system - Side curtain airbag system - Seat belt tensioner


● Comes on for a few seconds when


● Stays on constantly - the engine drives


you set the power mode to ON, then goes off.


only the front wheels in this state. Have the vehicle checked by a dealer.


● Comes on if there is a problem with


● Blinks while driving - the engine drives


the AWD with intelligent control system.


● Blinks when the AWD with intelligent control system is overheated. The system is inactive.


only the front wheels in this state. Stop in a safe place, shift to (P, and idle the engine until the indicator goes off. If the indicator does not stop blinking, take your vehicle to a dealer.


2 AWD (All-Wheel Drive) with


Intelligent Control System* P. 253


Index


72


* Not available on all models


2013 RDX uuIndicatorsu


Indicator


Name


On/Blinking


Explanation


Message


● Comes on for a few seconds when


● Stays on constantly - Have the vehicle


VSA® (Vehicle Stability Assist) System Indicator


you set the power mode to ON, then goes off.


● Blinks when VSA® is active. ● Comes on if there is a problem with the VSA® system or hill start assist system.


● Comes on for a few seconds when


VSA® (Vehicle Stability Assist) OFF Indicator


you set the power mode to ON, then goes off.


● Comes on when you deactivate


VSA®.


checked by a dealer.


2 VSA® (Vehicle Stability Assist), aka


ESC (Electronic Stability Control), System P. 251


2 VSA® On and Off P. 252



● Comes on for a few seconds if you


● Goes off when all doors and the tailgate


Door and Tailgate Open Indicator


set the power mode to ON, then goes off.


● Comes on if any door or the tailgate


is not completely closed.


● The beeper sounds and the


indicator comes on if any door or the tailgate is opened while driving.


are closed.


QRG


TOC


Index


Continued


73


2013 RDX uuIndicatorsu


Indicator


Name


On/Blinking


Explanation


Message


EPS (Electric Power Steering) System Indicator


Low Tire Pressure/TPMS Indicator


Turn Signal Indicators


● Comes on when you set the power


mode to ON, and goes off when the engine starts.


● Comes on if there is a problem with


the EPS (Electric Power Steering) System.


● Comes on for a few seconds when


you set the power mode to ON.


● Comes on if the tire pressure of any


of the tires becomes significantly low.


● Blinks for about one minute, and then stays on if there is a problem with the TPMS, or when a compact spare tire is temporarily installed.


● Stays on constantly or does not come on at all - Have the vehicle checked by a dealer.


2 If the EPS System Indicator Comes On


P. 335


● Comes on while driving - Stop in a safe place, check tire pressures, and inflate the tire(s) if necessary.


● Blinks and remains on - Have the vehicle checked by a dealer. If the vehicle is fitted with a compact spare, get your regular tire repaired or replaced and put back on your vehicle as soon as you can.


● The turn signal indicators blink


● Does not blink or blinks rapidly - A turn


when you operate the turn signal lever.


● If you press the hazard warning


button, both indicators and all turn signals blink at the same time.


signal light bulb has blown. Change the bulb immediately.


2 Front Turn Signal/Parking Light and Front Side Marker Light Bulbs P. 291


High Beam Indicator


● Comes on when the high beam


headlights are on.





QRG


TOC


Index


74


2013 RDX uuIndicatorsu


Indicator


Name


On/Blinking


Explanation


Message


Lights On Indicator


Fog Light Indicator *


● Comes on whenever the light


switch is on, or in AUTO when the exterior lights are on.


● If you set the power mode to ACCESSORY or VEHICLE OFF (LOCK) while the lights are on, a chime sounds when the driver's door is opened.


● Comes on when the fog lights are


on.



U.S.


Canada


Side Airbag Off Indicator


● Comes on for a few seconds when


● It does not mean there is a problem with


you set the power mode to ON, then goes off.


● Comes on when the passenger side airbag system is automatically shut off.


your side airbags.


● Comes on when nobody is sitting in the passenger seat - Have the vehicle checked by a dealer.


● Comes on when someone is sitting in the seat - Have the passenger sit properly.




U.S.


Canada


QRG


TOC


● Comes on briefly when you set the power mode to ON, then goes off. ● Comes on if the immobilizer system


cannot recognize the key information.


Immobilizer System Indicator


● Blinks - You cannot start the engine. Set the power mode to VEHICLE OFF (LOCK), then select the ON mode again.


● Repeatedly blinks - The system may be malfunctioning. Have the vehicle checked by a dealer.


● Do not attempt to alter this system or add other devices to it. Electrical problems can occur.


* Not available on all models



Index


Continued


75


2013 RDX QRG


TOC


uuIndicatorsu


Indicator


Name


On/Blinking


Explanation


Message


Security System Alarm Indicator


● Blinks when the security system


alarm has been set.


2 Security System Alarm P. 113


● Comes on for a few seconds when


you set the power mode to ON, then goes off.


● Comes on along with a beep when


a problem is detected. A system message on the multi-information display appears at the same time.


System Message Indicator


● While the indicator is on, press the


(information) button to see the message again.


● Refer to the Indicators information in this chapter when a system message appears on the multi-information display. Take the appropriate action for the message.


● The multi-information display does not return to


the normal screen unless the warning is canceled, or the


button is pressed.


CRUISE MAIN Indicator


● Comes on when you press the


CRUISE button.


2 Cruise Control P. 248


CRUISE CONTROL Indicator


● Comes on if you have set a speed


for cruise control.


2 Cruise Control P. 248


Index


76






2013 RDX uuIndicatorsu


Indicator


Name


On/Blinking


Explanation


Message


● Comes on for a few seconds when you change the power mode to ON. ● Comes on as soon as a problem is


detected in the keyless access system or keyless starting system.


Keyless Access System Indicator


● Have your vehicle checked by a dealer.


QRG


TOC


Index


77


2013 RDX uuIndicatorsuMulti-Information Display Warning and Information Messages


Multi-Information Display Warning and Information Messages The following messages appear only on the multi-information display. Press the with the system message indicator on.


(information) button to see the message again


Message


Condition


Explanation


● Appears when the fuel fill cap is loose or is not


installed.


2 Tighten Fuel Cap Message P. 334


Canadian models


● Appears when the washer fluid is low.


● Refill washer fluid.


2 Refilling Window Washer Fluid P. 286


● Appears while you are customizing the settings and


the shift lever is moved out of (P.


2 Customized Features P. 87


QRG


TOC


Index


78


2013 RDX uuIndicatorsuMulti-Information Display Warning and Information Messages


Message


Condition


Explanation


● Appears when the scheduled maintenance is due soon. ● Consequently, SERVICE DUE NOW and SERVICE


PAST DUE follow.


2 Maintenance Minder Messages on the


Multi-Information Display


P. 272


● Appears when the engine coolant temperature gets


abnormally high.


2 Overheating P. 331


● Appears when there is a problem with the power


U.S.


tailgate system.


● Manually open or close the power tailgate. ● Have the vehicle checked by a dealer.


Canada


QRG


TOC


Index


Continued


79


2013 RDX uuIndicatorsuMulti-Information Display Warning and Information Messages


Condition


Explanation


● Appears if there is a problem with the starting system.


● As a temporary measure, press and hold the ENGINE START/STOP button for 15 seconds while depressing the brake pedal and manually start the engine. Have the vehicle checked by a dealer.


Message


U.S.


Canada


● Appears after you unlock and open the driver’s door.


2 Starting the Engine P. 240


● Appears three seconds after the TO START ENGINE


message appears.


2 Starting the Engine P. 240


● Appears when the steering wheel is locked.


● Move the steering wheel left and right after pressing


the ENGINE START/STOP button.


QRG


TOC


Index


80


2013 RDX uuIndicatorsuMulti-Information Display Warning and Information Messages


Message


Condition


Explanation


● Appears if you press the ENGINE START/STOP button


● Press the ENGINE START/STOP button twice after


to turn the engine off without the shift lever in (P.


moving the shift lever to (P.


QRG


TOC


● Appears when the power mode is in ACCESSORY.



● Appears after the driver’s door is opened when the


power mode is in ACCESSORY.


● Press the ENGINE START/STOP button twice with your foot off the brake pedal to change the power mode to VEHICLE OFF (LOCK).


● Appears when you close the door with the power mode


● The message goes off when you bring the keyless


in ON without the keyless access remote inside the vehicle.


access remote back inside the vehicle, and close the door.


2 Keyless Access Remote Reminder P. 121


● Appears when the keyless access remote battery


becomes weak.


● Replace the battery as soon as possible. 2 Replacing the Button Battery P. 311


● Appears if the keyless access remote's battery is too weak to start the engine or the key is not with you when starting the engine. A beeper sounds six times.


2 If the Keyless Access Remote Battery is Weak


Index


P. 326


81


2013 RDX Gauges and Multi-Information Display


QRG


Gauges Gauges include the speedometer, tachometer, fuel gauge, and related indicators. They are displayed when the power mode is in ON.


■ Speedometer Displays your driving speed in mph (U.S.) or km/h (Canada).


TOC


■ Tachometer Shows the number of engine revolutions per minute.


■ Fuel Gauge Displays the amount of fuel left in the fuel tank.


■ Temperature Gauge Displays the temperature of the engine coolant.


1Fuel Gauge


NOTICE You should refuel when the reading approaches Running out of fuel can cause the engine to misfire, damaging the catalytic converter.


The actual amount of remaining fuel may differ from the fuel gauge reading.


1Temperature Gauge


NOTICE Driving with the temperature gauge pointer in the upper zone can cause serious engine damage. Pull safely to the side of the road and allow engine temperature to return to normal.


2 Overheating P. 331


Index


82


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


Multi-Information Display The multi-information display shows the odometer, trip meter, outside temperature indicator, and other gauges. It also displays important messages such as warnings and other helpful information.


■ Switching the Display


Press the display.


(information) button or the SEL/RESET button to change the


QRG


TOC


Black Screen


Average Fuel Economy/ Instant Fuel Economy


Range


Button


Customize Settings


Elapsed Time


SEL/RESET Button


Engine Oil Life


Tire Pressure for Each Tire


Average Speed


Index


Continued


83


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


Odometer


Trip A


Trip B


Outside Temperature


SEL/RESET Button


■ Odometer Shows the total number of miles (U.S.) or kilometers (Canada) that your vehicle has accumulated.


QRG


TOC


Index


84


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


■ Trip Meter Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last reset. Meters A and B can be used to measure two separate trips.


1Trip Meter


Switch between trip meter A and trip meter B by pressing the SEL/RESET button.


■ Resetting a trip meter To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip meter is reset to 0.0.


■ Outside Temperature Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).


■ Adjusting the outside temperature display Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading seems incorrect.


■ Average Fuel Economy Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100 km (Canada). The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.


■ Instant Fuel Economy Shows the instant fuel economy as a bar graph in mpg (U.S.) or l/100 km (Canada).


Continued


1Outside Temperature


The temperature sensor is in the front bumper. Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).


It may take several minutes for the display to be updated after the temperature reading has stabilized.


Use the multi-information display’s customized features to correct the temperature.


2 Customized Features P. 87


1Average Fuel Economy


You can change the way the average fuel economy is reset.


2 Customized Features P. 87


QRG


TOC


Index


85


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


■ Range Shows the estimated distance you can travel on the remaining fuel. This distance is estimated from the fuel economy of your trips in the past.


■ Elapsed Time Shows the time elapsed since the last time Trip A or Trip B was reset.


1Elapsed Time


You can change the way the elapsed time is reset.


2 Customized Features P. 87


■ Average Speed Shows the average speed in mph (U.S.) or km/h (Canada) since the last time Trip A or Trip B was reset.


1Average Speed


You can change the way the average speed is reset.


2 Customized Features P. 87


QRG


TOC


■ Tire Pressure Monitor Shows each tire's pressure.


2 TPMS (Tire Pressure Monitoring System) P. 253


■ Engine Oil Life Shows the remaining oil life and Maintenance MinderTM.


2 Maintenance MinderTM P. 271


Index


86


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


■ Customized Features Use the multi-information display to customize certain features.


■ How to customize Select the CUSTOMIZE SETTINGS screen by pressing the the power mode is in ON, and the vehicle is at a complete stop. Press the SEL/RESET button.


button while


1Customized Features


To customize other features, press the button.


2 List of customizable options P. 90


2 Example of customization settings P. 93


Customization is possible when you see the driver’s ID (DRIVER 1 or DRIVER 2) on the screen. The driver’s ID indicates which remote transmitter you have used to unlock the driver’s door. The customized settings are recalled every time you unlock the driver’s door with that remote.


When you customize settings: Shift to (P


Multi-Information Display: Goes to customize settings.


Button:


Changes the customize menus and items.


SEL/RESET button: Enters the selected item


QRG


TOC


Continued


Index


87


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


■ Customization flow Press the


button.


CUSTOMIZE SETTINGS


SEL/RESET


METER SETUP


SEL/RESET


LANGUAGE SELECTION


ADJUST OUTSIDE TEMP. DISPLAY


“TRIP A” RESET TIMING “TRIP B” RESET TIMING


KEYLESS START GUIDANCE SCREENS


DRIVING POSITION SETUP


SEL/RESET


MEMORY POSITION LINK


KEYLESS ACCESS SETUP


SEL/RESET


LIGHTING SETUP


SEL/RESET


DOOR SETUP


SEL/RESET


DOOR UNLOCK MODE


KEYLESS ACCESS LIGHT FLASH


KEYLESS ACCESS BEEP


INTERIOR LIGHT DIMMING TIME HEADLIGHT AUTO OFF TIMER


AUTO LIGHT SENSITIVITY


AUTO DOOR LOCK


AUTO DOOR UNLOCK


DOOR LOCK MODE


KEYLESS LOCK ACKNOWLEDGMENT


SECURITY RELOCK TIMER


QRG


TOC


Index


88


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


QRG


POWER TAILGATE SETUP *


SEL/RESET


POWER TAILGATE KEYLESS OPEN MODE


TOC


MAINTENANCE INFO.


DEFAULT ALL


EXIT


SEL/RESET


* Not available on all models


Continued


Index


89


2013 RDX QRG


TOC


uuGauges and Multi-Information DisplayuMulti-Information Display


■ List of customizable options


Setup Group


Customizable Features


Description


Selectable Settings


LANGUAGE SELECTION


Changes the displayed language.


ENGLISH*/FRENCH/SPANISH


ADJUST OUTSIDE TEMP. DISPLAY


Adjusts the temperature reading by a few degrees.


-5°F ~ ±0°F* ~ +5°F (U.S.)


-3°C ~ ±0°C* ~ +3°C (Canada)


METER SETUP


“TRIP A” RESET TIMING


“TRIP B” RESET TIMING


Changes the setting of how to reset trip meter A, average fuel economy A, average speed A, and elapsed time A.


Changes the setting of how to reset trip meter B, average fuel economy B, average speed B, and elapsed time B.


WITH REFUEL/IGN OFF/ MANUALLY RESET*


WITH REFUEL/IGN OFF/ MANUALLY RESET*


KEYLESS START GUIDANCE SCREENS


Displays the keyless start guidance when conditions are met to change power mode.


ON*/OFF


MEMORY POSITION LINK


Changes the driver's seat position to a stored setting.


ON*/OFF


DRIVING POSITION SETUP


*: Default Setting


Index


90


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


Setup Group


Customizable Features


Description


Selectable Settings


DOOR UNLOCK MODE


Changes which doors unlock when you grab the driver’s door handle.


DRIVER DOOR ONLY*/ALL DOORS


KEYLESS ACCESS SETUP


LIGHTING SETUP


*: Default Setting


KEYLESS ACCESS LIGHT FLASH


Causes some exterior lights to blink when you unlock/lock the doors.


KEYLESS ACCESS BEEP


Sets the beeper sound or not when you grab the either front door handle.


ON*/


OFF


ON*/OFF


INTERIOR LIGHT DIMMING TIME


Changes the length of time the interior lights stay on after you close the doors.


60 sec/30 sec*/15 sec


HEADLIGHT AUTO OFF TIMER


Changes the length of time the exterior lights stay on after you close the driver's door.


60 sec/30 sec/15 sec*/0 sec


AUTO LIGHT SENSITIVITY Changes the timing for the headlights to come on.


MAX/HIGH/MID*/LOW/MIN


QRG


TOC


Index


Continued


91


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


Setup Group


Customizable Features


Description


Selectable Settings


AUTO DOOR LOCK


Changes the setting for the automatic locking feature.


WITH VEH SPD*2/SHIFT FROM (P/OFF


AUTO DOOR UNLOCK


Changes the setting for when the doors unlock automatically.


DRIVER DOOR with SHIFT to (P *2/ALL DOORS with SHIFT to (P/DRIVER DOOR with IGN OFF/ALL DOORS with IGN OFF/OFF


DOOR LOCK MODE


Sets up either the driver's door or all doors to unlock on the first push of the remote.


DRIVER DOOR*2/ALL DOOR


KEYLESS LOCK ACKNOWLEDGMENT


LOCK/UNLOCK- The exterior lights flash. LOCK (2nd push)- The beeper sounds.


ON*2/OFF


SECURITY RELOCK TIMER


Changes the time it takes for the doors to relock and the security system to set after you unlock the vehicle without opening any door.


90 sec/60 sec/30 sec*2


POWER TAILGATE KEYLESS OPEN MODE


Changes the keyless setting for when the power tailgate opens.


ANYTIME*2 / WHEN UNLOCKED


Resets/Cancels the engine oil life display when you have performed the maintenance service.


RESET/CANCEL


Cancels/Resets all the customized settings as default.


CANCEL/SET


DOOR SETUP


POWER TAILGATE SETUP*1


MAINTENA NCE INFO.


DEFAULT ALL


*1:Not available on all models *2: Default Setting


QRG


TOC


Index


92


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


■ Example of customization settings The steps for changing the “TRIP A” RESET TIMING setting to WITH REFUEL are shown below. The default setting for “TRIP A” RESET TIMING is MANUALLY RESET.


1. Press


button to select


CUSTOMIZE SETTINGS, then press the SEL/RESET button.


2. Press the


button until METER


SETUP appears on the display.


3. Press the SEL/RESET button.


u LANGUAGE SELECTION appears first in


the display.


QRG


TOC


Continued


Index


93


2013 RDX uuGauges and Multi-Information DisplayuMulti-Information Display


4. Press the


button until “TRIP A”


RESET TIMING appears on the display, then press the SEL/RESET button. u The display switches to the


customization setup screen, where you can select WITH REFUEL, IGN OFF, MANUALLY RESET, or EXIT.


5. Press the


button and select WITH REFUEL, then press the SEL/RESET button. u The WITH REFUEL setup screen appears,


QRG


TOC


then the display returns to the customization menu screen.


6. Press the


button until EXIT


appears on the display, then press the SEL/ RESET button.


7. Repeat Step 6 until you return to the


normal screen.


Index


94


2013 RDX QRG


Controls


This chapter explains how to operate the various controls necessary for driving.


Setting the Clock ................................ 96
Locking and Unlocking the Doors


Key Types and Functions .................... 97
Locking/Unlocking the Doors from the Outside ............................................ 99
Low Keyless Access Remote Signal Strength..... 103
Locking/Unlocking the Doors from the Inside ... 104
Childproof Door Locks ..................... 105
Auto Door Locking/Unlocking .......... 106
Opening and Closing the Tailgate... 107
Security System ................................ 113
Immobilizer System .......................... 113
Security System Alarm...................... 113


Opening and Closing the Windows .... 115
Opening and Closing the Moonroof ....... 118
Operating the Switches Around the Steering Wheel ENGINE START/STOP Button............. 119
Turn Signals ..................................... 122
Light Switches.................................. 122
Fog Lights* ...................................... 125
Daytime Running Lights ................... 125
Wipers and Washers ........................ 126
Brightness Control ........................... 128
Rear Defogger/Heated Door Mirror Button ...129
Driving Position Memory System ...... 130


Adjusting the Steering Wheel .......... 132
Adjusting the Mirrors....................... 133
Interior Rearview Mirror ................... 133
Power Door Mirrors ......................... 134
Adjusting the Seats .......................... 136
Adjusting the Seat Positions............. 136
Interior Lights/Interior Convenience Items...... 143
Interior Lights .................................. 143
Interior Convenience Items .............. 145
Climate Control System ................... 152
Using Automatic Climate Control .... 152
Synchronized Mode ......................... 154
Automatic Climate Control Sensors.....155


* Not available on all models


Index


95


2013 RDX Setting the Clock


QRG


Clock You can adjust the time in the clock display with the power mode in ON. ■ Using the SETUP button 1. Press the SETUP button.


to select Adjust Clock, then press 3. Rotate


to select the item you want to change (12/24 hour mode, hour, minute). Then press


4. Rotate


to make the adjustment.


5. Press


to enter your selection. The display returns to Adjust Clock. Repeat steps 4 to 6 to adjust other items.


6. To enter the selection, Rotate


and select


Set, then press


7. Press the SETUP button to go back to the


normal display.


2. Rotate


TOC


Index


96


1Clock


These indications are used to show how to operate the selector knob. Rotate Press


to select.


to enter.


To set the time to the nearest hour: Press and hold the CLOCK button until Adjust Clock appears, then press the (6 (Reset) button.


Depending on the displayed time, the clock sets forward or backward. Example: 1:06 will reset to 1:00
1:53 will reset to 2:00


Models with navigation system The clock is automatically updated through the navigation system, so the time does not need to be adjusted.


2013 RDX Locking and Unlocking the Doors


Key Types and Functions This vehicle comes with the following keys:


■ Keys


Use the keyless access remote to start and stop the engine, and to lock and unlock all the doors and tailgate. You can also use the keyless access system to lock and unlock the doors and tailgate.


HOLD


■ Keyless access remote


Release Button


The built-in key can be used to lock/unlock the doors and the tailgate when the keyless access remote battery becomes weak and the power door lock/unlock operation is disabled.


Built-in Key


To remove the built-in key, pull it out while pressing the release button. To reinstall the built-in key, push the built-in key into the keyless access remote until it clicks.


1Key Types and Functions


All of the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.


2 Immobilizer System P. 113


The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: • Do not leave the keys in direct sunlight, or in


locations with high temperature or high humidity. • Do not drop the keys or set heavy objects on them. • Keep the keys away from liquids. • Do not take the keys apart except for replacing the


battery.


If the circuits in the keys are damaged, the engine may not start, and the keyless access system may not work. If the keys do not work properly, have them inspected by a dealer.


Continued


QRG


TOC


Index


97


2013 RDX uuLocking and Unlocking the DoorsuKey Types and Functions


■ Key Number Tag


Contains a number that you will need if you purchase a replacement key.


1Key Number Tag


Keep the key number tag separate from the key in a safe place outside of your vehicle. If you wish to purchase an additional key, contact a dealer.


If you lose your key and you cannot start the engine, contact a dealer.


QRG


TOC


Index


98


2013 RDX uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside


Locking/Unlocking the Doors from the Outside ■ Using the Remote Transmitter


LED


Unlock Button


HOLD


■ Locking the doors Press the lock button.


Once:


Lock Button


uSome exterior lights flash, all the doors and tailgate lock, and the security system sets.


Twice (within five seconds after the first push):


uA beeper sounds and verifies the security


system is set.


■ Unlocking the doors Press the unlock button.


Once:


uSome exterior lights flash twice, and the


driver's door unlocks.


Twice:


uThe remaining doors and tailgate unlock.


1Locking/Unlocking the Doors from the Outside


You can lock or unlock doors using the remote transmitter or keyless access system only when the power mode is in VEHICLE OFF.


1Using the Remote Transmitter


If you do not open a door within 30 seconds of unlocking the vehicle with the remote transmitter, the doors will automatically relock. You can change the relock timer setting.


2 Customized Features P. 87


If the interior light switch is in the door activated position, the interior lights come on when you press the unlock button. No doors opened: The lights fade out after 30 seconds. Doors relocked with the remote: The lights go off immediately.


2 Interior Lights P. 143


Continued


QRG


TOC


Index


99


2013 RDX uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside


■ Locking/Unlocking the Doors Using a Key


Fully insert the key and turn it.


Lock


Unlock


QRG


TOC


■ Locking a Door Without Using a Key


■ Locking the driver's door Push the lock tab forward a or push the master door lock switch in the lock direction b, and close the door.


■ Locking the passenger's doors Push the lock tab forward and close the door.


Index


■ Lockout prevention system The doors and the tailgate cannot be locked when the keyless access remote is inside the vehicle, and any door or the tailgate is open.


100


1Using the Remote Transmitter


The remote transmitter uses low-power signals, so the operating range may vary depending on the surroundings.


The remote will not lock the vehicle when a door or the tailgate is open.


If the distance at which it works varies, the battery is probably low. If the LED does not come on when you press a button, the battery is dead.


2 Replacing the Button Battery P. 311


You can customize the door unlock mode setting.


2 Customized Features P. 87


1Locking/Unlocking the Doors Using a Key


When you lock the driver's door with a key, all of the other doors and tailgate lock at the same time. When unlocking, the driver's door unlocks first. Turn the key a second time within a few seconds to unlock the remaining doors and the tailgate.


You can customize the door unlock mode setting.


2 Customized Features P. 87

Loading...
x