2012 Acura MDX Owners Manual

Playing a USB Flash Memory Device (Models with navigation system)

3. Turn the interface dial, select the

Track Random icon and press ENTER on the interface selector. The tracks are played in random order.

You can also select the function by using the RDM button. To cancel this function, turn the interface dial and select the Random OFF icon, and then press ENTER on the interface selector.

3. Turn the interface dial, select the

Folder Repeat icon and press ENTER on the interface selector. Playback of the folder that is currently being played will be repeated.

You can also select the function by using the RPT button. To cancel this function, turn the interface dial and select the Repeat OFF icon, and then press ENTER on the interface selector.

TRACK RANDOM

TRACK RANDOM OFF ICON

TRACK RANDOM ICON

This function plays all the tracks on the USB flash memory device in random order. 1. On the USB main screen, push the interface selector down to display AUDIO MENU.

2. Turn the interface dial, select

Random and press ENTER on the interface selector.

CONTINUED 293

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Playing a USB Flash Memory Device (Models with navigation system)

FOLDER RANDOM

FOLDER RANDOM ICON

This function plays all of the tracks in the current folder in random order. 1. On the USB main screen, push the interface selector down to display AUDIO MENU.

2. Turn the interface dial, select

Random and press ENTER on the interface selector.

294

3. Turn the interface dial, select the

Folder Random icon and press ENTER on the interface selector. The files are played in random order.

You can also select the function by using the RDM button. To cancel this function, turn the interface dial and select the Random OFF icon, and then press ENTER on the interface selector.

TRACK SCAN

TRACK SCAN OFF ICON

TRACK SCAN ICON This function samples all the tracks in the current folder in the order that they were recorded. 1. On the USB main screen, push the interface selector down to display AUDIO MENU.

2. Turn the interface dial, select the

Scan icon and press ENTER on the interface selector.

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Playing a USB Flash Memory Device (Models with navigation system)

3. Turn the interface dial, select the

Track Scan icon and press ENTER on the interface selector. Each track or file is sampled for 10
seconds. When all the tracks in the folder have been scanned, regular playback is resumed.

You can also select the function by using the SCAN button. To cancel this function, turn the interface dial and select the Scan OFF icon, and then press ENTER on the interface selector to play the last track sampled.

FOLDER SCAN

FOLDER SCAN ICON

This function samples the first file in each folder within the USB flash memory device. 1. On the USB main screen, push the interface selector down to display AUDIO MENU.

2. Turn the interface dial, select the

Scan icon and press ENTER on the interface selector.

3. Turn the interface dial, select the

Folder Scan icon and press ENTER on the interface selector.

The first file of the first folder is sampled for 10 seconds. If no other operations are carried out, the first files of the remaining folders are played for 10 seconds. After the first file of the last folder is played back, regular playback is resumed. To cancel this function, turn the interface dial and select the Scan OFF icon, and then press ENTER on the interface selector.

CONTINUED 295

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Playing a USB Flash Memory Device (Models with navigation system)

To Stop Playing a USB Flash Memory Device To play the radio, press the AM/FM, or XM button. Press the DISC button to switch to the disc mode. Press the HDD button to switch to HDD Audio. If you reconnect the same USB flash memory device, the system will begin playing where it left off.

DisconnectingaUSBFlashMemory Device You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Always follow the USB flash memory device's instructions when you remove it. When you disconnect the USB flash memory device while it is playing, the audio display and the navigation screen (if selected) show NO DATA.

296

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

USB Flash Memory Device Error Messages (Models with navigation system)

If you see an error message in the center display while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.

Error Message

Solution

BAD USB DEVICE PLEASE

CHECK OWNER'S

MANUAL ERROR

USB flash memory device is drawing too much current. Check owner's manual for compatible USB devices.

Internal USB ROM Error. Try a different USB device.

297

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Bluetooth® Audio System (Models with navigation system)

Without rear entertainment system

AUDIO DISPLAY

NAVIGATION SCREEN

With rear entertainment system

SKIP BUTTONS TITLE BUTTON

AM/FM BUTTON

USB/AUX BUTTON

XM BUTTON DISC BUTTON AUDIO BUTTON

INTERFACE DIAL

INTERFACE DIAL

TITLE BUTTON

AM/FM BUTTON XM BUTTON DISC BUTTON HDD BUTTON

AUDIO BUTTON

298

AUDIO DISPLAY

SKIP BUTTONS

USB/AUX BUTTON HDD BUTTON

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Bluetooth® Audio System (Models with navigation system)

Your vehicle is equipped with a Bluetooth® audio system, which allows you to listen to streaming audio from your Bluetooth® audio compatible phone. This function is only available on Bluetooth® Audio Compatible phones that are paired and linked to the vehicle's Bluetooth® HandsFreeLink® (HFL) system (see page 390). Not all Bluetooth-enabled phones with streaming audio capabilities are compatible with the system. You can find an approved phone by visiting www.acura.com/handsfreelink, or by calling the HandsFreeLink® consumer support at 1-888-528-7876. In Canada, visit www.acura.ca, or call 1-888-9-ACURA-9. NOTE: In some states, provinces, and territories it may be illegal to perform some data device functions while driving.

To Play Bluetooth® Audio Files

Make sure that your phone is paired and linked to the HFL. To begin to play the audio files, you may need to operate your phone. If so, follow the phone maker's operating instructions.

Press the USB/AUX buttonᤳ with the ignition switch in the ACCESSORY (I) or the ON (II) position. When the phone is recognized, you will see the Bluetooth® Audio message and icon on the audio display and the audio control display on the navigation screen (if selected), and the system begins to play. ᤳ : If an iPod or USB flash memory device or audio unit connected to the auxiliary input jack was selected at the last mode, you will see iPod, USB or AUX in the audio display and the audio control display on the navigation screen (if selected). Push the USB button again to play audio files from your Bluetooth® Audio phone.

CONTINUED 299

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Bluetooth® Audio System (Models with navigation system)

Once a device is linked, the name of the device will appear on the screen. Pressing the TITLE button switches the audio display between the Bluetooth® Audio and the device name. If more than one phone is paired to the HFL system, there will be delay before the system begins to play.

In the following conditions, the display shows ‘‘NO CONNECT’’ message after pressing the TITLE button. ● The phone is not linked to HFL. ● The phone is not turned on. ● The phone is not in the vehicle. ● Another HFL compatible phone,

which is not compatible for Bluetooth® Audio, is already connected.

300

If your Bluetooth® Audio compatible phone does not operate as described, make sure it is an Acura approved phone. To find out if your phone is approved, go to www.acura.com/ handsfreelink(in Canada, www. acura.ca), or call the HandsFreeLink® consumer support at 1-888-528-7876. VoiceControlSystem You can select the AUX mode by using the voice control buttons, but cannot operate the play mode functions. Toskipafile Press the side button to skip forward to the next file, and press the side to skip backward to the beginning of the current file. Push the to skip to the previous file.

of the SKIP

side again

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Bluetooth® Audio System (Models with navigation system)

Topauseorresumeafile

Turn the interface dial to switch the setting between the resume/pause mode and the sound setup mode. Select Resume/Pause, then press ENTER to set your selection. Each time you press ENTER, the system switches between the resume mode and pause mode. NOTE: The pause function may not be available on some phone devices.

The resume/pause mode can stop playing a file temporarily.

Tochangesoundsettings

Press the AUDIO button to display the audio control display. Turn the dial to switch the setting between the resume/pause mode and the sound setup mode. Select Sound Setup, then press ENTER to set your selection.

CONTINUED 301

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Bluetooth® Audio System (Models with navigation system)

Turn the dial to select a sound setup mode, then press ENTER to set your selection. See page 222 for more sound setting information. ToswitchtoHFLmode If you receive a call when the Bluetooth® Audio is playing, press the PICK-UP button on the steering wheel. The screen and the center display switch to the HFL mode (see page 384). After ending the call, press the HANG-UP button to go back to the Bluetooth® Audio mode.

ToturnofftheBluetooth®Audio mode Select any other audio mode by pressing a button; AM/FM, DISC, or HDD on the audio control panel, or press the MODE button on the steering wheel to select another audio mode. Switching to another mode pauses the music playing from your phone.

AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation. Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser's authoritytooperatetheequipment. ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

302

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Radio Frequencies Your vehicle's radio can receive the complete AM and FM bands. Those bands cover these frequencies: AM band: 530 to 1,710 kHz FM band: 87.7 to 107.9 MHz Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 MHz apart (87.9, 88.1, 88.3). Stations must use these exact frequencies. It is fairly common for stations to round-off the frequency in their advertising, so your radio could display a frequency of 100.9 even though the announcer may identify the station as ‘‘FM101.’’

AM/FM Radio Reception How well your vehicle's radio receives stations is dependent on many factors, such as the distance from the station's transmitter, nearby large objects, and atmospheric conditions. A radio station's signal gets weaker as you get farther away from its transmitter. If you are listening to an AM station, you will notice the sound volume becoming weaker, and the station drifting in and out. If you are listening to an FM station, you will see the stereo indicator flickering off and on as the signal weakens. Eventually, the stereo indicator will go off and the sound will fade completely as you get out of range of the station's signal.

AM/FM Radio Reception

Driving very near the transmitter of a station that is broadcasting on a frequency close to the frequency of the station you are listening to can also affect your radio's reception. You may temporarily hear both stations, or hear only the station you are close to.

CONTINUED 303

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

AM/FM Radio Reception

AsrequiredbytheFCC: Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser's authoritytooperatetheequipment.

Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your radio then receives both the direct signal from the station's transmitter, and the deflected signal. This causes the sound to distort or flutter. This is a main cause of poor radio reception in city driving.

Radio reception can be affected by atmospheric conditions such as thunderstorms, high humidity, and even sunspots. You may be able to receive a distant radio station one day and not receive it the next day because of a change in conditions. Electrical interference from passing vehicles and stationary sources can cause temporary reception problems.

304

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

MODE BUTTON

CH BUTTON

VOL BUTTON

Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel. The VOL button adjusts the volume up ( ). Press the top or bottom of the button, hold it until the desired volume is reached, then release it.

) or down (

The MODE button changes the mode. Pressing the button repeatedly selects FM1, FM2, AM, XM radio, disc (if a disc is loaded), HDD (on models with navigation system), Bluetooth® Audio (if paired), AUX (if an appropriate audio unit is connected). If an iPod or a USB flash memory device is plugged into the system, you can also select AUX. If you are listening to the radio, use the CH button to change stations. Each time you press the top (＋) of the button, the system goes to the next preset station on the band you are listening to. Press the bottom (－) to go back to the previous preset station. If you press and hold the CH button (＋) or (－), the system goes into the skip (seek) mode. It stops when it finds a station with a strong signal.

Remote Audio Controls

To activate the seek function, press and hold the top (＋) or bottom (－) of the CH button until you hear a beep. The system searches up or down from the current frequency to find a station with a strong signal. If you are playing a disc, the system skips to the beginning of the next track/file (file in MP3, WMA, or AAC format) each time you press the top (＋) of the CH button. Press the bottom (－) to return to the beginning of the current track/file. Press it twice to return to the previous track/file.

CONTINUED 305

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

When playing a USB flash memory device, you can also use the seek function to skip the folder. To activate this, press and hold either side of the CH button until you hear a beep. Onmodelswithoutnavigation system If you are playing a conventional CD (without the text data and not compressed in MP3 or WMA), you can use the skip function to select discs. Press and hold the top (＋) of the CH button until you hear a beep, to skip forward to the next disc. Press and hold the bottom (－) to skip backward to the previous disc.

Remote Audio Controls

You will see the track/file number and the elapsed time. If the disc has text data or is compressed inMP3 or WMA, you can also see any other information (track title, file name, folder name, etc.). In MP3 or WMA mode, you can use the seek function to select folders. Press and hold the top (＋) of the CH button until you hear a beep, to skip forward to the first file of the next folder. Press the bottom (－) to skip backward to the previous folder. If you are playing a USB flash memory device or iPod with the USB adapter cable, press and release the top (＋) of the CH button to skip forward to the beginning of the next file. Press the bottom (－) to skip backward to the beginning to the current file. Press it twice to return to the previous file.

306

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Auxiliary Input Jack

OnmodelswithRearEntertainment System

Auxiliary Input Jack

The auxiliary input jack is inside the console compartment. The system will accept auxiliary input from standard audio accessories using a 1/8 inch (3.5 mm) stereo miniplug. When a compatible audio unit is connected to the jack, press the USB/AUX button (DISC/AUX button on models without navigation system) to select it.

Auxiliary input jacks and headphone connectors for the rear entertainment system are on the back of the center console compartment. For more information, see page 339.

307

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Radio Theft Protection

If your vehicle’s battery is disconnected or goes dead, the audio system disables itself. If this happens, you will see ‘‘ENTER CODE’’ in the frequency display next time you turn on the system. Use the preset buttons (Icons on models with navigation system) to enter the five-digit code. The code is on the Anti-theft Identification Card included in your owner’s manual kit. When it is entered correctly, the radio will start playing. The Anti-theft Identification Card also lists your audio serial number. It is best to store the card in a safe place at home. In addition, you should write the audio system’s serial number in this owner’s manual. If you make a mistake entering the code, do not start over; complete the five-digit sequence, then enter the correct code. You have ten tries to enter the correct code. If you are unsuccessful in ten attempts, you must then leave the system on for one hour before trying again.

308

Canadianowners If you lose the Anti-theft Identification Card, you must obtain the code from your dealer. To do this, you will need the audio system’s serial number. If you do not have the serial number with you, ask your dealer how to retrieve it. Modelswithnavigationsystem You need to enter the same code for the navigation system to reactivate. Read the navigation system manual for details.

The system will retain your AM and FM presets even if power is disconnected. NOTE: If you have a My Acura account, it is easy to retrieve the anti-theft code online without having to access the serial number. U.S.owners We recommend that you register the security code at My Acura (myacura. com.) If you lose the Anti-theft Identification Card before registering the code at My Acura, you must obtain the code from your dealer or https:// radionavicode.acura.com/. To do this, you will need the audio system’s serial number. If you do not have the serial number with you, ask your dealer or go to https://radionavicode.acura.com/for information on how to retrieve it.

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Setting the Clock and Calendar

U.S. model is shown

: Press SET

Onmodelswithoutnavigationsystem You can see the clock and calendar information on the upper display. To set the clock and the calendar: 1. Press and hold the SET button until the clock display begins to blink.

2. Press and release the SET button

repeatedly. The mode switches from hours, minutes, AM/PM, year, month, then to day as shown above.

3. Select the desired mode by

pressing the SET button, then press either ▼ or ▲ button to change the setting.

4. After you set the day information, pressing the SET button again will cancel this setting mode and the system shows the adjusted display.

The system will also automatically return to the normal display about 10
seconds after you stop adjusting a mode. Onmodelswithnavigationsystem The navigation system receives signals from the global positioning system (GPS), and the displayed time is updated automatically by the GPS. Refer to the navigation system manual for how to adjust the time.

309

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

This vehicle's overhead mounted video display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste.

To Turn On the System Press the REAR PWR button. The overhead screen will open to the position it was last set. The indicator on the REAR PWR button will come on, as well as the indicator on the FRONT SOURCE button. The rear seat passengers can then operate the rear system from the control panel in the ceiling. The rear control panel can also be detached and used as a remote control, by pushing the RELEASE button, and pulling the remote toward you.

Rear Entertainment System

U.S.TechnologyPackagewith Entertainment,AdvancePackagewith Entertainment,CanadianTechnology, andElitePackages Your vehicle is equipped with a rear entertainment system that includes a DVD player for the enjoyment of the rear passengers. With this system, the rear passengers can enjoy a different entertainment source (radio, disc, HDD, USB, iPod®, DVD player, or XM Radio) than the front seat occupants. The audio is broadcast through the supplied wireless headphones. The ignition switch must be in the ACCESSORY (I) or the ON (II) position to operate the rear entertainment system.

310

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Speakers When you turn on the system, the rear speakers are automatically turned off if the rear system selects a different entertainment source than the front system. You will see the Rear Speakers Off icon both in the audio display and the overhead screen. The sound for the rear system is sent to the wireless headphones.

Rear Entertainment System

If you want to turn the rear speakers on again, press and hold the REAR PWR button until the Rear Speakers Off icon goes off. NOTE: The rear speakers are connected to the front system, so they will always play the source that the front system is set to.

Pressing the REAR CTRL OFF button disables rear control. The indicator in the button comes on and your passengers can no longer operate the system with the rear control panel. When the button is pressed, the ‘‘CTRL OFF’’ message appears in the overhead screen to let your passengers know that the control panel is disabled. The rear system selects the source it was last set to. If that source has been removed (the DVD has been ejected from the player, for example), you will see ‘‘No Disc’’ in the display. You should select another source or insert a DVD.

CONTINUED 311

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

REAR PWR BUTTON REAR CTRL OFF BUTTON

OVERHEAD SCREEN UNIT

FRONT SOURCE BUTTON REAR SOURCE BUTTON

312

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

To Select Rear Entertainment from the Front Control Panel To operate the rear entertainment system from the front panel, press the REAR SOURCE button. You will hear two beeps and the indicator in the button comes on to show that the control panel is enabled. If you do not operate the rear entertainment system from the front panel within 10 seconds, the indicator goes off and the FRONT SOURCE indicator comes on automatically. Radio controls for the front entertainment system can also be used to operate the rear entertainment system.

Rear Entertainment System

Operating the DVD Player from the Front Control Panel The DVD player in your rear entertainment system can play DVD video discs, audio CDs, MP3/WMA discs, and DTS CDs.

REAR CONTROL PANEL

You can tilt the screen at nine different angles from 90 to 130
degrees using the tilt button in the rear control panel. The default setting is 100 degrees. To continuously adjust the angle of the overhead screen, press and hold the TILT button.

OVERHEAD SCREEN

Press the REAR PWR button in the front panel or press the button in the rear control panel when REAR PWR is on. The overhead screen will open to the position it was last set.

CONTINUED 313

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

SKIP BUTTONS

PLAY/PAUSE BUTTON

EJECT BUTTON

314

Insert a DVD into the lower DVD/ CD slot in the audio unit. Push the DVD in halfway, the drive will pull it in the rest of the way. PLAY － Press the DVD ( button if the DVD does not start playing automatically. PAUSE － Press the DVD ( button to pause the DVD. Press the button again or press PLAY to resume. Pause works only with the DVD player.

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

button to

SKIP － Press and hold the button to move forward; you will see the time elapsed shown in the overhead screen advancing rapidly. Press and hold the move backward; you will see the time elapsed shown in the overhead screen decreasing. Release the button when the system reaches the point you want. Each time you press the and release it, the system skips forward to the beginning of the next track or chapter. Press and release the button to skip backward to the beginning of the current track. Press and release it again to skip to the beginning of the previous track or chapter.

button

EJECT － Press the eject button to remove the DVD from the drive. To Return to Front Audio Controls To return front panel control to the front audio system, press the FRONT SOURCE button. You will hear a beep and the indicator in the button comes on. The indicator also comes on automatically, when you do not operate the rear entertainment system within 10 seconds.

Rear Entertainment System

Using the Rear Control Panel To turn on the rear entertainment system from the rear control panel, press the PWR button. Use the DVD/AUX button, DISC/HDD button, XM RADIO button, or FM/ AM button to select the entertainment source. The selected source will be shown in the display. Make sure the rear control operation has not been disabled with the REAR CTRL button on the front panel. When the audio system is off or the front side rear power is off, the rear control panel cannot be turned on.

CONTINUED 315

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

To Play the Radio from the Rear Control Panel Press the FM/AM button to listen to the radio. Press the MENU button to display the Audio Menu on the overhead screen. You can enter the highlighted function by pressing the ENTER button. These functions have the same features as those of the front audio system. You can press and hold either side ( ) of the TUNE/SKIP bar to skip (seek) up/down, and press either side to tune up/down.

) of the TUNE/SKIP bar

or

or

REAR CONTROL PANEL

OVERHEAD SCREEN

or

To Play the XM Radio from the Rear Control Panel Press the XM button to listen to the XM radio. You can press either side ) of the TUNE/SKIP bar to scroll up/down and select channels within a category (in CATEGORY mode), or to scroll up/down and select from among all available channels (in CH mode).

Press the MENU button to display the Audio Menu on the overhead screen. You can enter the highlighted function by pressing the ENTER button. These functions have the same features as those of the front audio system. Pressing and holding the TITLE/ SCROLL button for 5 seconds enables you to switch between search modes.

316

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

To Play a Disc, HDD, USB, or iPod® from the Rear Control Panel Press the MENU button to display the Audio Menu on the overhead screen. Use the interface dial to highlight REPEAT, RANDOM, or SCAN on the screen. You can enter the highlighted function by pressing the ENTER button. These functions have the same features as those of the front audio system. When TITLE/SCROLL button is pressed, the title scrolls. When it's pushed again, scrolling stops.

To Play a DVD from the Rear Control Panel The video screen is for use by rear seat passengers only. The driver and front seat passenger should not try to view the screen while driving. Press the REAR PWR button in the front panel or press the button in the rear control panel when REAR PWR is on. The overhead screen will open to the position it was last set. You can tilt the screen at nine different angles from 90 to 130
degrees using the tilt button in the rear control panel. The default setting is 100 degrees. Press the button when you want to pause the DVD. Press this button again to go back to PLAY. Press the beginning of the next chapter. Press the beginning of the current chapter.

button to return to the

button to skip to the

or

button.

button again quickly to

Press the go to the previous chapter. To move rapidly within a chapter, press and hold the The system will continue to move through the chapter. Press the button to move forward, or the button to move backward. Release the button when the system reaches the point you want. To select the menu on the DVD, press the MENU button. Use the interface dial to turn to the desired menu selection, then press the ENTER button to enter your selection.

CONTINUED 317

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

TITLE/SCROLL Button

MENU Button

Top Menu

When you press the TITLE/SCROLL button while a DVD is playing, the current status of title, chapter, elapsed time, angle, subtitle, audio, and sound characteristics, with the personal surround logo are displayed. To return to the DVD video screen, press the TITLE/SCROLL button again. If you do not press the TITLE/SCROLL button, the screen returns to the DVD video screen after several seconds.

When you press the MENU button while a DVD is playing, the DVD Menu appears. The menu options are TOP MENU, MENU, PLAY MODE, SEARCH/NUMINPUT, REPEAT, PAUSE/PLAY, and STOP. To go to your selected menu, use the interface dial to highlight the icon and press the ENTER button. To return to the DVD video screen, select RETURN.

When you select ‘‘TOP MENU’’, the screen changes to the DVD's title menu. This menu also appears when you press the MENU button while a DVD is not playing. To go back to play, press the MENU or CANCEL button.

318

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Menu

Play Mode

‘‘Audio’’

Rear Entertainment System

When you select ‘‘MENU’’ with the interface dial, the screen changes to the DVD's title menu.

When you select ‘‘PLAY MODE’’ with the interface dial, you can change the DVD's Audio, Subtitle or Angle setting.

or

To change the Audio setting, highlight ‘‘Audio’’ from the play mode menu with the button. A submenu of the dubbed language appears. You can select another language by turning the interface dial. The sound characteristics (Dolby Digital, LPCM, MPEG Audio, dts) recorded with the selected language is also displayed next to the language.

CONTINUED 319

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

The selectable languages vary from DVD to DVD, and this feature may not be available on some DVDs. To go back to play, press the MENU or CANCEL button.

‘‘Subtitle’’

‘‘Angle’’

To change the DVD's subtitle, highlight ‘‘Subtitle’’ from the play mode menu with the You can see the available subtitles with the interface dial. To go back to play, press the MENU or CANCEL button.

button.

or

or

To change the view angle, highlight ‘‘Angle’’ from the play mode menu with the button. You can see the available angle options with the interface dial. If there are no multiple angles available on the DVD, you cannot change from ‘‘Angle 1’’. To go back to play, press the MENU or CANCEL button.

320

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Search

‘‘Title/ChapterSearch’’

NumInput

Rear Entertainment System

Highlight ‘‘SEARCH’’ with the interface dial to select ‘‘Title’’, ‘‘Chapter’’, or ‘‘NumInput’’ and press ENTER.

With ‘‘Title’’ highlighted, use the interface dial to jump to your desired title and press the ENTER button. When ‘‘Chapter’’ is highlighted, follow the same procedure for the chapter search.

A numerical command can be issued to a DVD by inputting a three digit number, and a button number can be selected on the screen. Highlight ‘‘NumInput’’ with the interface dial. Press the ENTER button to go to the NumInput selection screen.

CONTINUED 321

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

Repeat

SETUP Button

OFF

button, and if you want to

Rotate the interface dial to select each number, then press the ENTER button. Press the button when you have finished inputting the number. If you want to delete a number, press the change the input order of a number, press the To go back to the DVD screen, press the MENU or CANCEL button or select RETURN and press the ENTER button.

button.

CHAPTER REPEAT

TITLE REPEAT

When you select ‘‘REPEAT’’ with the interface dial, the screen changes to the repeat mode menu.

When you press the SETUP button while a DVD is playing, the setup menu appears. The menu options are ‘‘Disp Adjust’’, ‘‘Aspect Ratio’’, ‘‘Personal Surround’’, and ‘‘Language’’. To change a setup, use the interface dial to highlight your selection and press the ENTER button. To return to the DVD video screen, press the SETUP or CANCEL button.

322

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

DispAdjust To adjust the display, highlight ‘‘Disp Adjust’’ from the setup menu with the interface dial and press the ENTER button. You can adjust these display settings: ● Brightness ● Contrast ● Black Level ● Color ● Tint

Select the quality you want to adjust by turning the interface dial. Adjust the setting by turning the interface dial. To go back to the Disp Adjust screen, press the ENTER or CANCEL button.

If you want to set the display to the default setting, select ‘‘Reset’’ by turning the interface dial, and, then pressing the ENTER button.

CONTINUED 323

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

AspectRatio You can set the screen mode to these settings: ● Normal ● Wide ● Zoom ● Full

The display changes as shown above. Select ‘‘Yes,’’ and press the ENTER button. You will see the message ‘‘Default display settings applied’’ on the display for 5 seconds.

324

Select the ‘‘Aspect Ratio’’ by turning the interface dial, then press the ENTER button. The selectable setting menu is displayed, and the current setting is highlighted in blue. Select the desired setting by turning the interface dial, then press the ENTER button. The selected setting will be highlighted in blue for one second, and the screen returns to the play mode in the selected setting.

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

PersonalSurround

Select ‘‘Music,’’ ‘‘Cinema,’’ or ‘‘Voice’’ by turning the interface dial, and enter your selection by pressing the ENTER button. The ‘‘PERSONAL SURROUND’’ logo is displayed in the upper right corner of the screen. If you select ‘‘Off,’’ the logo disappears, and there will be no special sound effect.

To change the Personal Surround setting, highlight ‘‘Personal Surround’’ from the setup menu with the interface dial and press the ENTER button. The effect selection appears.

Rear Entertainment System

Language

You can change the display language to English, French, or Spanish. Rotate the interface dial to the setting you want, then press the ENTER button.

CONTINUED 325

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

Appearance

INITIALSETTINGSMenu

When you press the SETUP button while a DVD is not playing, the setup menu appears for audio. DispAdjust,PersonalSurround,and Language The operation for these menus is the same as that for using the DVD player.

You can change the color of the screen to white, black, blue, brown, or red. You can also synchronize with the front navigation system. Rotate the interface dial to the setting you want, then press the ENTER button.

When you press the MENU button on the rear control panel when a DVD is not playing, the ‘‘INITIAL SETTINGS’’ menu is displayed. There are five selectable menus: ‘‘Language’’ ‘‘Dynamic Range’’, ‘‘Angle Mark’’, ‘‘Parental Level’’, and ‘‘Password’’.

326

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

INITIALSETTINGS(Language)

Menu Language

When you select ‘‘Language’’ with the interface dial, the menu shown above appears. To return to the stop or previous screen, press the CANCEL button. Because the priority language is determined by each disc you insert, you might not be able to set a selected item.

or

To select the language used in the DISC menus, select ‘‘Menu Language’’ by pressing the button. Select the desired language by turning the interface dial, and then pressing the ENTER button. The selectable languages are, English, French, Spanish, German, Italian, Dutch, Chinese, Korean, Thai, Japanese or others.

Rear Entertainment System

If you want another language than those listed, you need to enter the code number of the desired language. Select ‘‘other,’’ and press the ENTER button. The display changes as shown in the next column.

CONTINUED 327

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

If you select ‘‘No,’’ and press the ENTER button, the display returns to the initial screen of the ‘‘Language’’ menu.

If you select ‘‘Yes,’’ the display changes to the language code input mode. Select the first digit using the interface dial, and press the ENTER button to enter it. Repeat this until all four digits are filled. Press the button on the control panel to enter the new language code.

If you made a mistake entering a number digit, press the the control panel. Then select and enter the correct digit as described. The display returns to the initial ‘‘Language’’ menu screen.

button on

328

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Audio Language

Subtitle Language

You can select the dubbed language before playing DVDs. Select ‘‘Audio Language’’ by pressing the Follow the same instructions you used to set the menu language.

button.

or

You can select the subtitle language before playing DVDs. Select ‘‘Subtitle Language’’ by pressing the Follow the same instructions you used to set the menu language.

button.

or

Rear Entertainment System

Dynamic Range ‘‘Dynamic Range’’ reduces the differences between the loud and quiet sound levels throughout the disc. When this is on, the louder sounds are lowered, and quieter sounds are increased.

CONTINUED 329

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

Angle Mark

ANGLE MARK

Select the ‘‘Dynamic Range’’ by turning the interface dial. To turn ‘‘Dynamic Range’’ on or off, select ‘‘ON’’ or ‘‘OFF’’ by turning the interface dial, and then press the ENTER button.

When you switch to another angle while playing a DVD, the angle mark is displayed in the upper right corner of the screen. You can set the system to display or not display this angle mark.

Select the ‘‘Angle Mark’’ by turning the interface dial. If you want the angle mark to be displayed, select ‘‘ON’’ by turning the interface dial, and then press the ENTER button.

330

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Parental Level You can place an auditory restriction by changing the parental control level. The higher the level number, the lower the restriction.

Highlight ‘‘Parental Level’’ and press the ENTER button. You will see the submenu. If you select ‘‘No’’ and press the ENTER button, the screen goes back to the ‘‘Others’’ menu.

Rear Entertainment System

When you select and enter ‘‘Yes,’’ the display changes as shown above. To change the level, you need to enter your four digit password. Select the number for the first digit by turning the interface dial, and enter it by pressing the ENTER button. Repeat this until all four digits are filled. Press the button on the control panel.

CONTINUED 331

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

Changing the Password

If the system does not recognize the password you entered, you will see the above display. Repeat the parental control level steps until you enter the correct password.

If you enter the password correctly, you can then change the parental control level. Once you correctly enter the password, turn the interface dial to change the level, and then press the ENTER button. Press the button to enter your selection.

The password was set to ‘‘1111’’ when the vehicle left the factory.

332

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

To change the password, select ‘‘Password.’’ You will see the above menu displayed. Select ‘‘Yes’’ by turning the interface dial, then press the ENTER button. If you select ‘‘No,’’ and press the ENTER button, the display returns to the ‘‘Others’’ menu.

Select the first digit by turning the interface dial, and enter it by pressing the ENTER button. Repeat this until all four digits are entered. Press the panel.

button on the control

If the system does not recognize the password you entered, you will see the above display. Repeat the password setting steps until you enter the correct password.

CONTINUED 333

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

Remote Control

If you forget the password, select ‘‘Password,’’ and press the 10 times.

button

The display changes as shown above. If you want to use the default password (1111), select ‘‘Yes,’’ and press the ENTER button. The message ‘‘Default password setting applied’’ is displayed for 5
seconds.

RELEASE BUTTON The rear control panel can be detached from the ceiling unit and used as a remote control. To remove it from the ceiling unit, press the release button. The control panel will swing down partway. Pivot it down further past the detent until it detaches from the hinge. To reinstall it, reverse the procedure.

334

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Replacing the Remote Control Batteries

COVER

An improperly disposed of battery can hurt the environment. Always confirm local regulations for battery disposal.

If it takes several pushes on the button to operate the rear entertainment system, have your dealer replace the batteries as soon as possible. Battery type: BR3032

Rear Entertainment System

AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation. Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser's authoritytooperatetheequipment. ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

CONTINUED 335

Protecting DVDs The tips on how to handle and protect DVDs are basically the same as those for compact discs. Refer to ‘‘Protecting Your Discs’’ on page 247.

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

Playable DVDs

There are various types of DVDs available. Some of them are not compatible with your system. The DVD player in your rear entertainment system can play DVDs and CDs bearing the above marks on their packages or jackets.

336

The DVD player can also play discs recorded in MP3/WMA formats and DTS CDs. Those packages or jackets should also bear the designation of ‘‘1’’ or ‘‘ALL’’. DVD-ROMs cannot be played in this system. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

Error Message

Cause

Solution

DISC ERROR

FOCUS Error

MECH ERROR

Mechanical Error

HEAT ERROR

High Temperature

REGION ERR

PARENT ERR

Invalid region code Invalid parental control level

Press the disc eject button, and remove the disc. Check for an error indication. Insert the disc again. If the code does not disappear or the disc cannot be removed, consult your dealer. Press the disc eject button, and remove the disc. Check for an error indication. Insert the disc again. If the code does not disappear or the disc cannot be removed, consult your dealer. Will disappear when the temperature returns to normal. The disc is not playable in this unit. Eject the disc, and insert a disc compatible with this system. Reinsert the disc, and increase the parental control level (see page 331).

DVD Player Error Messages The chart on the right explains the error messages you may see in the display while playing a disc. If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.

CONTINUED 337

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

Wireless Headphones

VOLUME DIAL

Some state and local government agencies prohibit the use of headphones by the driver of a motor vehicle. Always obey applicable laws and regulations.

The audio for the rear entertainment system is sent to the wireless headphones that come with the system. When using the headphones, make sure you wear them correctly: L (left) and R (right) are marked on the sides of the frame. Wearing the headphones backwards may affect audio reception, limiting the sound quality and range.

338

To use the headphones, pivot the earpieces outward. This turns them on. To adjust the volume, turn the dial on the bottom of the right earpiece. When you remove the headphones, the earpieces automatically pivot inward, and the headphones turn off. When not in use, store the headphones in the pocket of either front seat.

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

ReplacingBatteries

COVER

Auxiliary Input Jacks

Rear Entertainment System

TAB

Each headphone uses one AAA battery. The battery is under the cover on the left earpiece. To remove the cover, insert a coin in the slot and twist it slightly to pry the cover away from the earpiece. Pull the cover outward, and pivot it out of the way.

BATTERY

Remove the battery. Install the new battery in the earpiece as shown in the diagram next to the battery slot. Slide the cover back into place on the earpiece, then press down on the back edge to lock it in place.

Auxiliary input jacks and headphone connectors for the rear entertainment system are on the back of the center console compartment.

CONTINUED 339

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Rear Entertainment System

VOLUME DIALS

AUXILIARY INPUT JACKS

The system will accept auxiliary inputs from standard video games and video equipment. Some video game power supplies may cause poor picture quality. V = Video jack L = Left audio jack R = Right audio jack

HEADPHONE CONNECTORS

There are three headphone connectors for the third seat passengers. Each connector has its own volume control.

340

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights, position lights, side marker lights and taillights flashes if someone attempts to break into your vehicle or remove the audio unit. This alarm continues for two minutes, then the system resets. To deactivate the system before the two minutes have elapsed, unlock the driver's door with the key or the remote transmitter.

The security system automatically sets 15 seconds after you lock the doors, hood, and tailgate. For the system to activate, you must lock the doors from the outside with the key, or use driver's lock tab, door lock master switch, or remote transmitter. The security system indicator on the instrument panel starts blinking immediately to show you the system is setting itself.

SECURITY SYSTEM INDICATOR

Once the security system sets, opening any door, tailgate, or hood without using the key or the remote transmitter, will cause the alarm to activate. It also activates if the ignition switch is turned to the ON (II) position, the audio unit is removed from the dashboard or the wiring is cut.

Security System

The security system does not set if any door, the tailgate, or hood is not fully closed. Before you leave the vehicle, make sure the doors, tailgate and hood are securely closed. To see if the system sets after you exit the vehicle, press the LOCK button on the remote transmitter within five seconds. If the system is set, the horn will beep once. Do not attempt to alter this system or add other devices to it.

341

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Compass

Compass Operation Onmodelswithoutnavigationsystem Compass operation can be affected by driving near power lines or stations, across bridges, through tunnels, over railroad crossings, past large vehicles, or driving near large objects that can cause a magnetic disturbance. It can also be affected by accessories such as antennas and roof racks that are mounted by magnets. Compass Calibration If you see ‘‘－－’’ in the compass display and ‘‘CAL’’ and ‘‘ ’’ are shown in the calendar display, the compass is self-calibrating. The compass may need to be manually calibrated after exposure to a strong magnetic field. If the compass seems to be continually showing the wrong direction and is not self-calibrating, do the following.

342

COMPASS DISPLAY

1. Press and hold the SET button for five seconds until the clock display changes to ‘‘ZON ? N.’’ (Clock adjustment mode will be started after the first two seconds.)

2. Press the SET button. ‘‘CAL ? N’’

will be displayed. At this point, pressing the SET button will exit calibration mode.

Press and hold SET Press SET Press ▼

3. Press the ▼ button. ‘‘CAL ? Y’’ will

be displayed.

4. Press the SET button. The

compass display will change to ‘‘－－’’ and ‘‘CAL’’ and ‘‘ shown.

’’ are

5. Drive the vehicle slowly in two

complete circles.

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

6. When the display goes from

‘‘－－’’ to an actual heading, the unit is calibrated and the display returns to normal.

NOTE: Do this procedure in an open area, away from buildings, power lines, and other vehicles. CompassZoneSelection In most areas, there is a variation between magnetic north and true north. Zone selection is required so the compass can compensate for this variation. To check and select the zone, do this:

1. Press and hold the SET button for five seconds until the clock display changes to ‘‘ZON ? N.’’ (Clock adjustment mode will be started after the first two seconds.)

2. Press the ▼ button. ‘‘ZON ? Y’’ will

be displayed.

3. Press the SET button. The zone

the compass is currently in will be displayed.

Compass

4. Find the zone for your area on the

map.

5. If the zone is incorrect, press the

▼ button to cycle the count down, or the ▲ button to cycle the count up. Once the correct zone is displayed, continue to step 6.

6. Press the SET button to set the

zone selection.

7. Press and hold the SET button for

about 5 seconds to exit the zone selection and return display to normal.

CONTINUED 343

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Compass

Zone Map

344

11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Using Cruise Control CRUISE (MAIN) BUTTON

Cruise control allows you to maintain a set speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. It should be used