Back

 Powercruise 13 Darwin - POWERCRUISE #13 DARWIN 26th-27th APRIL 2008  

Page 1 of 33
Jump to page
Post Topic
Douglas R8
  • Douglas R8
  • Budding User
  • Member No.: 62,279
  • Joined: 18-February 07
  • Posts: 1,029
Post #1 post 8th November 2007 - 06:38 PM
should be a good one in april next year.

im currently rebuilding my car for it....hope'n for a nice little grumpy package of 290rwkw dancingcool.gif

who's commin and what are you bringing?


--------------------
TOP
RBNT
Post #2

GTR circuit car.

MiNiTrUkR
Post #3

should have my sr20 in my hilux by then biggrin.gif

incubus
Post #4

my push bike if i can get the tyres pumped up in time

super_s13
Post #5

Are you serious another thread about the powercruise and how good it wont be again. Geez there is another one about joining the street meet with it can we keep it in one thread. dunno.gif

SCHSLYF
Post #6

QUOTE(incubus @ Nov 9 2007, 12:51 PM) [snapback]1281612332[/snapback]

my push bike if i can get the tyres pumped up in time


i think i still have a puncher repair kit at home thumbsup.gif , i could bring it around, bowrofl.gif let me know. or you been doing to many skids burnout.gif and wore out your tyres? dunno.gif

Douglas R8
Post #7

keep on topic,keep it positive, if you dont have anything positive to say dont write anything.

POWERCRUISE ROCKS!!! thumbsup.gif

Cobraed
Post #8

Bar stool racers

VLCT WALKY
Post #9

in the same process,

hoping for a safe 350hp mark with the new setup!

do me fine smile.gif and beat 96% of ls1's out there
Douglas R8
Post #10

QUOTE(VLCT WALKY @ Nov 9 2007, 01:54 PM) [snapback]1281612513[/snapback]

in the same process,

hoping for a safe 350hp mark with the new setup!

do me fine smile.gif and beat 96% of ls1's out there



hahe, stirrer thumbsup.gif

super_s13
Post #11

https://www.boostcruising.com/forums/index....howtopic=247459



but i hope to have the rolla all done with the turbo setup and yes i will hope to beat most ls1's out there with a mere 210BHP but that being in a 700 KG car LS1's look out

super_s13
Post #12

yeah good luck unlike some i was being serious and i hope it will be done by then.

HYPOV6
Post #13

And i will have 600BHP by then in the aristo tongue.gif

But on a serious note, my 180sx would be finally ready by then smile.gif

Enrage
Post #14

itl never be ready benno...

GTS33R
Post #15

QUOTE(incubus @ Nov 9 2007, 01:21 PM) [snapback]1281612332[/snapback]

my push bike if i can get the tyres pumped up in time


You could enter in the burnout comp.

http://au.youtube.com/watch?v=wROerqNm3ug

FTW!

buzurkracing
Post #16

i'll be there in a mazda.

vh-holden
Post #17

QUOTE(buzurkracing @ Nov 9 2007, 06:15 PM) [snapback]1281613608[/snapback]

i'll be there in a mazda.


passenger in deans ey? tongue.gif

i'd like to take the vk out, but it would be pretty pointless at this point in time. it is very plain to look at, isn't that fast and doesn't do corners.

POCOCK
Post #18

i'd like to take the esky out



will have to see what they say this year about it

RIPHSV
Post #19

QUOTE(super_s13 @ Nov 9 2007, 01:48 PM) [snapback]1281612420[/snapback]

Are you serious another thread about the powercruise and how good it wont be again. Geez there is another one about joining the street meet with it can we keep it in one thread. dunno.gif

dude, if u dont like the thread dont read it or post in it.
really its that simple.
on topic, will have me new gear box an motor will b done by then, so will be there in tha clubbie. thumbsup.gif

SIKUNIT
Post #20

If my "car" starts i will be there.

gemzu
Post #21

--

super_s13
Post #22

QUOTE(RIPHSV @ Nov 9 2007, 11:41 PM) [snapback]1281614228[/snapback]

dude, if u dont like the thread dont read it or post in it.
really its that simple.
on topic, will have me new gear box an motor will b done by then, so will be there in tha clubbie. thumbsup.gif



Mate calm down i was just saying i dont see the point in having so many threads about the one event.

super_s13
Post #23

yeah Devo is painting my broom rolla so we should definatley be there cant wait.

Provided it is run a little better than last year. Got told the guys that paid did not get treated as welln as they should be dunno.gif

unreal
Post #24

QUOTE(super_s13 @ Nov 10 2007, 08:38 PM) [snapback]1281616905[/snapback]

yeah Devo is painting my broom rolla so we should definatley be there cant wait.

Provided it is run a little better than last year. Got told the guys that paid did not get treated as welln as they should be dunno.gif


everyone i know who went had a ball how are you meant to be treated with red carpet or sumfin dunno.gif

i plan to be there for sure powercruise rocks!!!

olskool
Post #25

should be there in the Willys, if not the Nag will be just cruizin,
Mainly just a bit of paint and alot of wiring

Salad Fingers
Post #26

olskool, you just going to leave that as a complete walk off front end or you going to put a hinged bonnet on it?

Looks freakin' great.

and yes, I cant wait till powercruise, i will definitely enter this year, looks like loads more fun than spectating.

super_s13
Post #27

QUOTE(unreal @ Nov 10 2007, 11:40 PM) [snapback]1281617397[/snapback]

everyone i know who went had a ball how are you meant to be treated with red carpet or sumfin dunno.gif

i plan to be there for sure powercruise rocks!!!



I meant being bullied off the track for the big sponsored guys. A few that were out there said that they were getting warnings and shit for going to fast even when they werent and then track time getting cut down cos of other events. So i am just hoping it is run better then that do you get what i am saying now?

Douglas R8
Post #28

QUOTE(olskool @ Nov 11 2007, 09:50 AM) [snapback]1281617781[/snapback]

should be there in the Willys, if not the Nag will be just cruizin,
Mainly just a bit of paint and alot of wiring



NOW THIS IS A CAR I WANT TO SEE!!!

H O T R O D

its good to see everyone's positive about it.....
the more people who come down and give it there best the better!!!


which brings me to my next problem....... :thumbsup:

olskool
Post #29

QUOTE(Salad Fingers @ Nov 11 2007, 09:22 AM) [snapback]1281617785[/snapback]

olskool, you just going to leave that as a complete walk off front end or you going to put a hinged bonnet on it?

Looks freakin' great.



Thanks guys and yep the whole nose cone will slip off in 5-10 minutes, a little more glass work and some quick release catches and the front will be done

There seems to be bits missing in above pics..... whats happened to the dunnydoor

SIKUNIT
Post #30

Put a real motor in it.

ScUd'EsS
Post #31

If Mummas allowed to go out and play this year - i'll be there joining Helava and the other girls!!

Not quite sure which car though!! Tough choice!!

GT - 73 bug - Bertie? I know problem solved i can take SCUD.... bowrofl.gif

vh-holden
Post #32

QUOTE(ScUd'EsS @ Nov 11 2007, 01:13 PM) [snapback]1281618321[/snapback]

GT - 73 bug - Bertie? I know problem solved i can take SCUD.... bowrofl.gif


take parts from all of them and make somthing unique.

Douglas R8
Post #33

QUOTE(olskool @ Nov 11 2007, 01:33 PM) [snapback]1281618296[/snapback]

Thanks guys and yep the whole nose cone will slip off in 5-10 minutes, a little more glass work and some quick release catches and the front will be done

There seems to be bits missing in above pics..... whats happened to the dunnydoor


dont make the willy's to nice, hope she stays flat black!!! save the bling for the engine bay!!!

im rebuilding with extra herbs (nothin over the top..im justa tradey) biggrin.gif



SIKUNIT
Post #34

Good to see your using all the name brands there Doug laugh.gif

Homebrand FTMFCLW

Douglas R8
Post #35

QUOTE(SIKUNIT @ Nov 11 2007, 02:12 PM) [snapback]1281618416[/snapback]

Good to see your using all the name brands there Doug laugh.gif

Homebrand FTMFCLW



haha biggrin.gif

i saved 70cents by using home brand scouring pads instead of those upity high priced ones....

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 1 of 33
Jump to page
THIS TOPIC HAS BEEN ARCHIVED
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x