Login- 2013 Volvo C30 Owners Manuals
- Volvo C30 Owners Manuals
- 2008 Volvo C30 Owners Manuals
- Volvo C30 Owners Manuals
- 2011 Volvo C30 Owners Manuals
- Volvo C30 Owners Manuals
- 2012 Volvo C30 Owners Manuals
- Volvo C30 Owners Manuals
- 2009 Volvo C30 Owners Manuals
- Volvo C30 Owners Manuals
- 2010 Volvo C30 Owners Manuals
- Volvo C30 Owners Manuals
- Download PDF Manual
-
ward or rearward-facing position, depending on the age and size of the child.
Route the seat belt through the convertible seat
A small child's head represents a consider- able part of its total weight and its neck is still very weak. Volvo recommends that chil- dren up to age 4 travel, properly restrained, facing rearward. In addition, Volvo recom- mends that children should ride rearward facing, properly restrained, as long as pos- sible.
WARNING
• Convertible child seats should be instal-
led in the rear seat only.
• A rear-facing convertible seat should not
be positioned behind the driver's seat unless there is adequate space for safe installation.
1. Place the convertible seat in the rear seat
of the vehicle.
``
41
01 Safety
01
Convertible seats
Fasten the seat belt 2. Attach the seat belt to the convertible seat
according to the manufacturer's instruc- tions.
3. Fasten the seat belt by inserting the latch plate into the buckle (lock) until a distinct click is audible.
4. Pull the shoulder section of the seat belt
out as far as possible to activate the belt's automatic locking function.
42
NOTE
WARNING
The locking retractor will automatically release when the seat belt is unbuckled and allowed to retract fully.
It should not be possible to move the child restraint more than 1 in. (2.5 cm) in any direction.
5. Press the convertible seat firmly in place, let the seat belt retract and pull it taut. A sound from the seat belt retractor's auto- matic locking function will be audible at this time and is normal. The seat belt should now be locked in place.
The convertible seat can be removed by unbuckling the seat belt and letting it retract completely.
Ensure that the seat is securely in place
Pull out the shoulder section of the seat belt 6. Push and pull the convertible seat to
ensure that it is held securely in place by the seat belt.
Securing a booster cushion
Booster cushions are recommended for chil- dren who have outgrown convertible seats. 1. Place the booster cushion in the rear seat
of the vehicle.
2. With the child properly seated on the
booster cushion, attach the seat belt to or around the cushion according to the man- ufacturer's instructions.
3. Fasten the seat belt by inserting the latch plate into the buckle (lock) until a distinct click is audible.
4. Ensure that the seat belt is pulled taut and
fits snugly around the child.
Position the child correctly on the booster cushion and fasten the seat belt
WARNING
A child seat should never be used in the front passenger seat of any vehicle with a front passenger airbag – not even if the Passenger airbag off symbol near the rear-view mirror is illuminated (on vehicles equipped with Occupant Weight Sensor). If the severity of an accident were to cause the airbag to inflate, this could lead to serious injury or death to a child seated in this posi- tion.
WARNING
• The hip section of the three-point seat belt must fit snugly across the child's hips, not across the stomach.
• The shoulder section of the three-point seat belt should be positioned across the chest and shoulder.
• The shoulder belt must never be placed
behind the child's back or under the arm.
01 Safety
Booster cushions
01
43
01 Safety
01
ISOFIX lower anchors
Using the ISOFIX lower child seat anchors
Lower anchors for ISOFIX-equipped child seats are located in both rear seating positions, hidden below the backrest cushions. Symbols on the seat back upholstery mark the anchor positions (see the illustration).
To access the anchors: 1. Put the child restraint in position. 2. Kneel on the child restraint to press down the seat cushion and locate the anchors by feel.
44
3. Fasten the attachment on the child
restraint's lower straps to the ISOFIX lower anchors.
4. Firmly tension the lower child seat straps according to the manufacturer's instruc- tions.
NOTE
• Always follow your child seat manufac- turer's installation instructions, and use both ISOFIX lower anchors and top tethers whenever possible.
WARNING
• The ISOFIX lower child restraint
anchors are only intended for use with child seats positioned in the left or right seating positions.
Fasten the attachment correctly to the ISOFIX lower anchors
WARNING
Be sure to fasten the attachment correctly to the anchor (see the illustration). If the attachment is not correctly fastened, the child restraint may not be properly secured in the event of a collision.
Top tether anchors
Top tether anchorage points Volvo vehicles are equipped with child restraint top tether anchorages in the rear seating posi- tions. They are located on the rear sides of the backrests.
Using the top tether anchorages 1. Place the child restraint on the rear seat. 2. Attach the hook to the anchorage.
Route the strap under the head restraint
WARNING
Be sure to fasten the child tether attachment correctly to the anchor. If it is not correctly fastened, the child seat may not be properly restrained in the event of a collision.
3. Route the top tether strap under the head restraint and fasten its attachment to the anchorage.
4. Firmly tension the top tether strap accord-
ing to the child restraint manufacturer's instructions. Tension the top tether strap only after the lower anchor straps or the seat belt have been firmly tensioned.
01 Safety
Top tether anchors
01
See page 44 for information on securing the child restraint to ISOFIX lower anchors.
WARNING
• Never route a top tether strap over the
top or around the head restraint. It should always be routed under the head restraint.
• Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts or harnesses. The anchorages are not able to withstand excessive forces on them in the event of collision if full harness seat belts or adult seat belts are installed to them. An adult who uses a belt anchored in a child restraint anchorage runs a great risk of suffering severe injuries should a colli- sion occur.
• Do not install rear speakers that require the removal of the top tether anchors or interfere with the proper use of the top tether strap.
45
01 Safety
01
Child restraint registration and recalls
Registering a child restraint Child restraints could be recalled for safety reasons. You must register your child restraint to be reached in a recall. To stay informed about child safety seat recalls, be sure to fill out and return the registration card that comes with new child restraints. Child restraint recall information is readily avail- able in both the U.S. and Canada. For recall information in the U.S., call the U.S. Govern- ment's Auto Safety Hotline at 1-800-424-9393. In Canada, visit Transport Canada's Child Safety website at http://www.tc.gc.ca/ roadsafety/childsafety/menu.htm.
46
01 Safety
01
47
Instrument overview................................................................................ 50
Instrument panel..................................................................................... 53
Indicator and warning symbols............................................................... 55
Symbols – instrument panel.................................................................... 57
Information display.................................................................................. 60
12-volt sockets....................................................................................... 62
Lighting panel.......................................................................................... 63
Left-side steering wheel lever................................................................. 65
Trip computer.......................................................................................... 67
Cruise control*........................................................................................ 69
Right-side steering wheel lever............................................................... 71
Steering wheel adjustment, Hazard warning flashers............................. 74
Parking brake.......................................................................................... 75
Power windows....................................................................................... 76
Mirrors..................................................................................................... 77
Power moonroof*.................................................................................... 80
Personal settings.................................................................................... 82
HomeLink® Wireless Control System*................................................... 8548
* Option/accessory, for more information, see Introduction.
INSTRUMENTS AND CONTROLS
02
02 Instruments and controls
Instrument overview
02
50
02 Instruments and controls
Instrument overview
Position for optional equipment
Position for optional equipment
02
Steering wheel adjustment
Hood opener
Controls in front doors
Left steering wheel lever
Lighting panel, fuel filler door opener
Door open handle and locking button
Climate system air vent
Side window air vent
Cruise control
Horn, airbag
Main instrument panel
Audio controls
Right steering wheel lever
Ignition switch
Moonroof control*
Not in use
Not is use
Courtesy lighting switch
Driver's side reading light
Passenger's side reading light
Seat belt reminder and Occupant Weight Sensor indicator
Rear-view mirror
Display for climate control, personal settings, and audio system
Audio system
Controls for personal settings and audio system
Controls for climate system
Gear selector
Hazard warning flashers
Door open handle, and locking button
Glove compartment
Parking brake
12-volt socket
* Option/accessory, for more information, see Introduction.
``
51
02 Instruments and controls
Instrument overview
Control panel in driver's door
02
Power windows
Door mirror button, driver's side
Door mirror adjustment control
Door mirror button, passenger's side
52
Instrument panel
02
02 Instruments and controls
Instrument panel
10
11
12
13
14
Speedometer
Turn signal, left
Warning symbol – See the following pages for additional information. Information display – The display presents information and warning messages, the ambient temperature, clock, etc. When the ambient temperature is between 23 °F and 36 °F (–5 °C and +2 °C), a snowflake sym- bol is shown in the display. This symbol serves as a warning for possible slippery road surfaces. Please note that this symbol does not indicate a fault with your car. At low speeds, or when the car is not moving,
the temperature readings may be slightly higher than the actual ambient tempera- ture. Information symbol – See the following pages for additional information. Turn signal, right
Tachometer – Shows engine speed in thousands of revolutions per minute (rpm). Do not drive continuously with the needle in the red area of the dial, which indicates maximum allowable engine rpm range. Instead, shift to a higher gear or slow the vehicle down. The engine management system will automatically prevent exces-
sively high engines speeds. This will be noticeable as a pronounced unevenness in engine speed. Indicator and information symbols
Fuel gauge, see page 267 for fuel tank vol- ume. When a warning light in the gauge comes on, the vehicle should be refueled as soon as possible, see page 67 for more information on fuel level and con- sumption in the "Trip computer” section. High beam indicator
Function display – This window displays information on functions such as the
``
53
02 Instruments and controls
Instrument panel
odometer, trip odometers, optional rain sensor, and cruise control. Trip odometer reset button – The trip odometers are used to measure short dis- tances. Press the button briefly to switch between the odometer for the car's total mileage and the two trip odometers, T1
and T2. A long press (more than 2 seconds) resets the currently selected trip odometer. Temperature gauge – The gauge indicates the temperature of the engine cooling sys- tem. If the temperature is abnormally high and the needle enters the red zone, a mes- sage is shown in the display. Bear in mind that auxiliary lamps in front of the air intake reduce the cooling capacity at high outside temperatures and high engine loads. Indicator and warning symbols02
54
Function check The indicator and warning symbols1 light up when you turn the ignition key or the optional keyless drive start control to the driving posi- tion (position II) before starting. This shows that the symbols are functioning.
When the engine starts, all sym- bols go out. If the engine is not started within 5 seconds, all of the symbols except the malfunction indicator light (CHECK ENGINE) and the oil pressure warning light will go out. Certain symbols may
not have their functions illustrated, depending on the car's equipment. The PARK BRAKE symbol will not go out until the parking brake has been released.
02 Instruments and controls
Symbols in the center of the instrument panel
Indicator and warning symbols
If the red warning symbol lights up: 1. Stop the car as soon as possible in a suit-
able location.
02
2. Read the message in the information dis-
play.
3. Follow the instructions provided, or con- tact a trained and qualified Volvo service technician. Erase the message by pressing READ, see page 60.
Warning symbol
The red warning symbol lights up to indicate a fault that could affect the car's drivability.This symbol illuminates when the vehicle is traveling at speeds above 5 mph
(7 km/h). A text explaining the nature of the fault will also be shown in the information display. The symbol and accompanying text will remain on until the fault has been corrected. This sym- bol may also light up in combination with other indicator or warning symbols.
Information symbol
The yellow information symbol lights up to alert the driver to a message in the information dis- play. This symbol illuminates when the vehicle is traveling at speeds
below 5 mph (7 km/h). The message can be erased by pressing the READ button, see page 60, or will disappear automatically (the length of time required for the message to disappear varies, depending on the function indicated). When the message "TIME FOR REGULAR SERVICE" is displayed, the text can be erased and the information symbol light can be turned off by pressing the READ button. The text will disappear and the symbol light will go out auto- matically after two minutes.
1 On certain engines, the symbol for low oilpressure is not used. Instead, a text warning is provided in the information display, see page 212.
``
55
02 Instruments and controls
Indicator and warning symbols
This symbol may also light up in combination with other indicator or warning symbols.
02
NOTE
The car can still be driven after the informa- tion symbol has come on. The car can be driven for 1–2 weeks after service-related information has been displayed.
56
02 Instruments and controls
Symbols – left side
1. Malfunction indicator light
As you drive, a computer called On-Board Diagnostics II (OBDII) monitors your car's engine, trans- mission, electrical and emission systems.
The CHECK ENGINE light will light up if the computer senses a condition that potentially may need correcting. When this happens, please have your car checked by a trained and qualified Volvo service technician as soon as possible.
A CHECK ENGINE light may have many cau- ses. Sometimes, you may not notice a change in your car's behavior. Even so, an uncorrected condition could hurt fuel economy, emission controls, and drivability. Extended driving with- out correcting the cause could even damage other components in your car.
NOTE
Canadian models are equipped with the second symbol.
2. Anti-lock Brake system (ABS)
If the warning light comes on, there is a malfunction of the ABS system (the standard braking system will still function). The vehicle should be driven to a trained and qualified Volvo service technician for inspection, see page 153 for additional informa- tion.
NOTE
Canadian models are equipped with the second symbol.
Symbols – instrument panel
3. Rear fog light
This symbol indicates that the rear fog light (located in the driver's side taillight cluster) is on.
02
4. Stability system DSTC
This indicator symbol flashes when the DSTC (Dynamic Stability and Traction control system) is actively working to stabilize the car, see page 155 for more detailed infor-
mation.
5. Tire Pressure Monitoring System This system monitors inflation pressure in the tires. See page 193 for more information.
6. Fuel level warning light
When this light comes on, the vehi- cle should be refueled as soon as possible.
``
57
02 Instruments and controls
Symbols – instrument panel
Symbols – right side
NOTE
02
Canadian models are equipped with the second symbol.
1. Turn signal indicator for trailer (not C30)
2. Parking brake applied
This light is on when the parking brake (hand brake) is applied. The parking brake lever is situated between the front seats, see page 75 for more information.
3. SRS system warning light
If this light comes on while the car is being driven, or remains on for longer than approximately 10 sec- onds after the car has been started, the SRS system's diag-
nostic functions have detected a fault in a seat belt lock or pretensioner, a front airbag, side impact airbag, and/or an inflatable curtain. Have the system(s) inspected by a trained and qualified Volvo service technician as soon as possible.
4. Oil pressure warning light1
If the light comes on while driving, the car, stop the engine immedi- ately, and check the engine oil level. If the oil level is normal and the light stays on after restart, have the car towed to the nearest trained and quali- fied Volvo service technician. After hard driv- ing, the light may come on occasionally when the engine is idling. This is normal, provided it goes off when the engine speed is increased.
5. Seat belt reminder
This symbol (and the seat belt reminder light above the rear view mirror) will light up if either front seat occupant has not buckled his/ her seat belt. If the car is not mov- ing, the symbols will go out after approximately 6 seconds.
6. Generator warning light
If the light comes on while the engine is running, have the charg- ing system checked by an author- ized Volvo workshop.
7. Brake failure warning light
If this light comes on while driving or braking, stop the car as quickly as possible in a safe place, open the hood, and check the brake fluid level in the reservoir, see page 211 for the location of the reservoir.
NOTE
Canadian models are equipped with the second symbol.
1 On certain engines, this symbol is not used to indicate low oil pressure. Instead, a text warning is provided in the information display, see also page 212.
58
WARNING
If the fluid level is below the MIN mark in the reservoir or if a Brake failure – Service urgent message is displayed in the infor- mation display: DO NOT DRIVE. Have the car towed to a trained and qualified Volvo service technician and have the brake sys- tem inspected.
If the BRAKES and ABS warning lights come on at the same time, this could indicate a fault in the brake system. In this case: 1. Stop the car in a suitable place and switch
off the engine.
2. Restart the engine. 3.
4.
If both warning lights go off, no further action is required and the car can be driven. If both lights remain on after the engine has been restarted, switch off the engine again and check the brake fluid level, see page 211 for the location of the reservoir.
02 Instruments and controls
Symbols – instrument panel
Door open warning The driver will be alerted if one of the doors, the hood or the liftgate are open or ajar.
At low speeds
If the car is moving at a speed of less than approximately 3 mph (5 km/h), the Information symbol in the instrument panel will light up and a message will be shown in the
information display indicating which door(s), etc is not completely closed.
At higher speeds
If the car is moving at a speed above approximately 6 mph (10 km/h), the Warning symbol in the instrument panel will light up and a message will be shown in the
information display indicating which door(s), etc is not completely closed.
Hood and liftgate
If the hood and/or liftgate is not completely closed, the Information symbol in the instrument panel will light up and a message will be dis- played, regardless of the vehicle's
speed.
02
59
02 Instruments and controls
Information display
Messages
02
When an indicator or warning light in the instru- ment panel comes on, a message is also shown in the information display. To read a message: 1. Press the READ button (1). 2. Pressing READ repeatedly enables you to scroll to any other messages that may be stored.
60
NOTE
Message
Meaning
If a message is displayed when e.g. you are using the trip computer, this message must be read before you can access the trip com- puter.
SERVICE REQUIREDA
Message
Meaning
STOP SAFELYA
HIGH ENGINE TEMP STOP SAFELY
SERVICE URGENTA
SEE MANUALA
Stop the vehicle in a safe place and switch off the engine to help prevent the risk of seri- ous damage.
Stop the vehicle in a safe place and switch off the engine to help prevent the risk of seri- ous damage.
Take your car to a trained and qualified Volvo service techni- cian for inspection immediately.
Refer to your owner's manual. For additional information, please contact your Volvo retailer.
BOOK TIME FOR SERVICE
TIME FOR REGULAR MAINTE- NANCE
MAINTE- NANCE OVER- DUE
Take your car to a trained and qualified Volvo service techni- cian for inspection as soon as possible (but preferably before the next scheduled mainte- nance service).
Book time for service at an authorized Volvo workshop.
This message is affec- ted by the number of miles/km driven, by the number of months, or by the number of engine hours since the service reminder was reset at the most recent regu- larly scheduled service.
If the vehicle is not serv- iced according to schedule, the warranty may not apply to dam- aged parts, etc.
Message
TIME FOR REGULAR MAINTE- NANCE
REMINDER CHECK OIL LEVEL
Meaning
This message is affec- ted by the number of miles/km driven, by the number of months, or by the number of engine hours since the service reminder was reset at the most recent regu- larly scheduled service.
Stop as soon as possi- ble and switch off the engine, check the oil level and top up if nec- essary, see page 212.
A This is part of the message. Additional information will also
be displayed.
02 Instruments and controls
Information display
02
61
02 Instruments and controls
12-volt sockets
12-volt socket (front seat)
NOTE
NOTE
02
The cover should be kept on when the aux- iliary socket is not in use.
The 12-volt socket in the rear seat cannot function as a cigarette lighter.
Auxiliary equipment The buttons to the left of the 12-volt socket can be used for Volvo-installed optional or auxiliary equipment.
12-volt socket (rear seat)
12-volt socket, auxiliary equipment The 12-volt socket can be used to plug in cer- tain accessories such as cellular telephones, etc. The maximum current is 10 A. The key must be in position I (or higher) for the auxiliary socket to function.
Ashtrays/cigarette lighter The auxiliary socket can also be used for a cig- arette lighter1, and ashtrays, which can be pur- chased from your Volvo retailer.
1 Accessory.
62
02 Instruments and controls
Parking lights
Pos.
Lighting
All lighting off. Low beam head- lights (daytime running lights) will automatically come on if the ignition key is in position II. Front and rear parking lights and license plate lights will also be on. High beams can be briefly flashed. The headlights switch off automatically when the ignition key is removed.
Parking lights
Daytime running lights. High beams and high beam flash can be used in this position.
The front and rear parking lights can be turned on even when the ignition is switched off. ±
Turn switch (1) to the parking light position. The license plate lights also illuminate when the parking lights are switched on.
Light switch
Thumb wheel for adjusting brightness of instrument lighting Daytime running lights
To unlock the fuel filler door
Rear fog light
Lighting panel
Headlights 1. Turn the ignition key to position II. 2. The low beam headlights (daytime running
lights) illuminate automatically, except when the light switch (1) is in the parking light position1.
02
NOTE
See page 65 for information on switching between high and low beams.
Brake lights The brake lights come on automatically when the brakes are applied.
Fog lights
Front fog lights* The front fog lights can be used in combination with either the headlights or the parking lights. 1. Turn the ignition key to position II. 2. Press button (3) to turn on the front fog
lights.
An indicator light in the button illuminates when the front fog lights are on.
1 On Canadian models, the daytime running lights will remain on with the light switch in this position.
* Option/accessory, for more information, see Introduction.
``
63
02 Instruments and controls
Lighting panel
Rear fog light The single rear fog light is located in the driver's side taillight cluster. The rear fog light will only function in combi- nation with the high/low beam headlights or the optional front fog lights. 1. Turn the ignition key to position II. 2. Press button (5) to turn on the rear fog light. An indicator light in the button illuminates when the rear fog light is on.
NOTE
The rear fog light is considerably brighter than the normal taillights and should be used only when conditions such as fog, rain, snow, smoke or dust reduce visibility for other vehicles to less than 500 ft. (150 meters).
Instrument panel lighting The instrument panel lighting illuminates when the ignition is in position II and the light or switch (1) is in either position
NOTE
To make it easier to read the odometer, trip odometer, clock, and ambient temperature, these gauges illuminate when the vehicle is unlocked and when the key has been removed from the ignition switch. The light- ing will go out when the vehicle is locked.
Move the thumb wheel (2) up to increase brightness or down to decrease brightness.
Unlocking the fuel filler door With the ignition switched off, press button (4) to unlock the fuel filler door. Please note that the fuel filler door will remain unlocked until the car begins to move forward. An audible click will be heard when the fuel filler door re-locks.
02
64
Lever positions
Turn signals
High/low beam headlights
02 Instruments and controls
Left-side steering wheel lever
When turning ± Move the lever as far up or down as pos- sible (to position 2) to start the turn signals. The turn signals will be cancelled automatically by the movement of the steering wheel, or the lever can be returned to its initial position by hand.
When changing lanes The driver can automatically flash the turn sig- nals 3 times by: • Moving the turn signal lever up or down to
position 1 and releasing it.
• Moving the lever up or down to position 2
and immediately back to its original posi- tion.NOTE
• This automatic flashing sequence can be interrupted by immediately moving the lever in the opposite direction.
• If the turn signal indicator flashes faster
than normal, check for a burned-out turn signal bulb.
Continuous high beams 1. Turn the ignition key to position II. 2. With the light switch (1) in position
see page 63, pull the turn signal lever toward the steering wheel (position 4) to toggle between high and low beams.
High beam flash 1. Turn the ignition key to position II. 2. Pull the turn signal lever to position 3. The high beams will remain on until the lever is released.
Home safe lighting When you leave your car at night, you can make use of the home safe lighting function to illuminate the area in front of the car. 1. Remove the key from the ignition switch. 2. Pull the direction indicator lever as far as
possible towards the steering wheel (to position 4) and release it.
3. Exit the car and lock the doors. The headlights and parking lights will illuminate and remain on for 301, 60 or 90 seconds. The time interval can be changed according to your
02
``
65
Turn signals, lane change position
Turn signals, position for normal turns
High beam flash
Toggle between high and low beams, Home Safe lighting
1 Factory setting.
02 Instruments and controls
Left-side steering wheel lever
preferences by using the Personal Settings function, see page 82 for more information.
02
66
02 Instruments and controls
• ACTUAL SPEED (current speed in mph,
Canadian models only)
• DSTC, see page 155
NOTE
Warning messages from the car's monitor- ing systems will override the trip computer function.
If a warning message is shown in the informa- tion display while you are using the trip com- puter: 1. Acknowledge the message by pressing the
READ (button 1).
2. Press READ again to return to the trip
computer function.
Controls The trip computer functions can be accessed by twisting the thumb wheel (2) one step at a time in either direction. Twisting a final time returns you to the original function.
Resetting AVERAGE (average fuel consumption) and AVERAGE SPEED can be reset. 1. Select one of these functions. 2. Press RESET (3).
Trip computer
MILES TO EMPTY TANK This function shows the approximate distance that can be driven on the fuel remaining in the tank. The calculation is based on average fuel consumption during the last 20 miles (30 km) of driving and the amount of fuel remaining in the tank when the reading was taken. When the message ---- miles to empty tank appears in the display, refuel as soon as pos- sible. AVERAGE This value indicates fuel consumption since the last time the trip computer was reset, by press- ing RESET (button 3). When the engine is switched off, information on fuel consumption is stored and remains in system memory until RESET (button 3) is pressed again.
INSTANTANEOUS This value indicates the current fuel consump- tion, based on readings taken once per sec- ond. When the car is not moving, "----" will be displayed. AVERAGE SPEED This value indicates average speed since the last time the trip computer was reset, by press- ing RESET (button 3). When the engine is switched off, information on average speed is stored and remains in system memory until the RESET (button 3) is pressed again.
02
``
67
READ (press to acknowledge/confirm/ erase a message) Thumb wheel (used to scroll among the trip computer menus) RESET
The trip computer stores information gathered from several systems in your car and has four menus (five on Canadian models) that can be shown in the information display. • MILES TO EMPTY TANK • AVERAGE (average fuel consumption) • INSTANTANEOUS (current fuel con-
sumption)
• AVERAGE SPEED
02 Instruments and controls
Trip computer
02
ACTUAL SPEED (Canadian models only) This function provides the driver with an instan- taneous conversion of the car's current speed from km/h to mph.
NOTE
Trip computer readings may vary slightly depending on the circumference of the tires on the car, tire inflation, or driving style.
68
Engaging the cruise control function
Increasing or decreasing speed
NOTE
02 Instruments and controls
Cruise control*
02
• Cruise control will not function at speeds below 20 mph (30 km/h).
• Momentary acceleration, for less than 1 minute (e.g. when passing another car), does not affect cruise control oper- ation. The car will automatically return to the previously set speed when the accelerator pedal is released.
The cruise control buttons are located on the left side of the steering wheel hub.
NOTE
This does not set the vehicle's speed.
1. Press the CRUISE button. CRUISE will
appear in the function display in the center of the instrument panel.
2. Press + or – to set the current speed.
CRUISE ON will be displayed.
Use + or – in the following ways to increase or decrease the vehicle's speed: 1. Press and hold down + or – until the vehicle
reaches the desired speed. This will become the set speed when the button is released.
2. Press + or – for approximately a half sec- ond and release the button to increase or decrease vehicle speed by approximately 1 mph (1.6 km/h).
Temporarily disengaging the cruise control • Press 0 to temporarily disengage cruise
control.
CRUISE will appear in the function display. The currently set speed is stored in the sys- tem's memory.
Cruise control is also automatically disengaged: • If the speed drops below approximately
20 mph (30 km/h) when driving uphill.
• When the brake or clutch pedal is
depressed.
• If the gear selector is moved to posi-
tion N.
* Option/accessory, for more information, see Introduction.
``
69
02 Instruments and controls
Cruise control*
02
• During wheel spin or wheel lock-up. • If the vehicle's speed is increased by using
the accelerator pedal for more than 1 minute.
Returning to the set speed
Press the button to resume the previously set speed. CRUISE ON will be displayed.
Disengaging cruise control Cruise control can also be disengaged by: • Pressing the CRUISE button (CRUISE
ON will no longer be shown in the function display).
• Putting the gear selector in Neutral (N).
WARNING
Cruise control should not be used in heavy traffic or when driving on wet or slippery roads. Cruise control may not maintain set speed on steep downgrades.
70
* Option/accessory, for more information, see Introduction.
02 Instruments and controls
Windshield wipers
Windshield/headlight washers
Rain sensor – on/of, see page 71
Thumb wheel
Liftgate wiper/washer
Windshield wipers off
The windshield wipers are off when the lever is in position 0.
Manual wiper function
From position 0, move the lever upward. The windshield wipers will sweep one stroke at a time for as long as the lever is held up.
Intermittent wiper function
With the lever in this position, you can set the wiper interval by mov- ing the thumb wheel (C) upward to increase wiper speed or down- ward to decrease the speed.
Continuous wiper function
The wipers operate at "normal" speed. High speed wiper function.
– Windshield washers
Pull the lever toward the steering wheel and release it. The wipers will make 2–3 sweeps across the windshield after the lever has been released.
Right-side steering wheel lever
CAUTION
• Use ample washer fluid when washing the windshield. The windshield should be thoroughly wet when the wipers are in operation.
• Before using the wipers, ice and snow
should be removed from the wind- shield/rear window. Be sure the wiper blades are not frozen in place.
02
Headlight washers (certain models) When the lever has been pulled, high pressure jets mounted in the bumper will spray the head- lights. The following applies to conserve washer fluid, see page 63 for information on the light switch positions:
Low/high beam headlights on The headlights will be washed the first time the windshield is washed. Thereafter, the head- lights will only be washed once for every five times the windshield is washed within a 10 minute period.
Parking lights on Optional Dual Xenon headlights will be washed once for every five times the windshield is washed. Normal halogen headlights will not be washed.
``
71
02 Instruments and controls
Right-side steering wheel lever
– Rain sensor*
02
3. Press button B (see page 71). The rain sen- sor symbol will appear in the lower display.
Manual deactivation The rain sensor can be deactivated by: Pressing button (B). or Moving the windshield wiper lever down.
NOTE
The rain sensor function will remain acti- vated if the lever is briefly moved up to acti- vate the "manual sweep" function.
The rain sensor regulates windshield wiper speed according to the amount of water on the windshield. The sensitivity of the rain sensor is adjusted by moving the thumb wheel (C in the illustration on the previous page) up (the wipers will sweep the windshield more frequently) or down (the wipers will sweep the windshield less frequently).
On/Off Activating the rain sensor 1. Switch on the ignition. 2. Put the windshield wiper lever in posi-
tion 0.
CAUTION
The rain sensor should be deactivated when washing the car in an automatic car wash, etc. If the rain sensor function is left on, the wipers will start inadvertently in the car wash and could be damaged.
Automatic deactivation The rain sensor is deactivated automatically in the following situations: • When the key is removed from the ignition. • Five minutes after the ignition is switched
off if the key is left in the ignition.
72
* Option/accessory, for more information, see Introduction.
– Thumb wheel
The thumb wheel is used to set the wiper inter- val when intermittent wiping is selected, or the sensitivity to the amount of rain on the wind- shield when the rain sensor is selected. Move the wheel upward or downward to increase/ decrease wiper speed when the intermittent function is selected, or to increase/decrease the optional rain sensor's sensitivity when the this function is activated.
– Liftgate wiper/washer
Press the lever forward to wipe and wash the liftgate window. The wiper will sweep the win- dow several times after the lever has been released. The button at the end of the lever has three positions: • Intermittent wiping: Press in the upper sec-
tion of the button.
• Normal wiper speed: Press in the lower
section of the button.
• Neutral position: The wiper function is
switched off.
02 Instruments and controls
Right-side steering wheel lever
Liftgate wiper and reverse gear • If the front wipers are on and the transmis-
sion is put into reverse gear, the liftgate wiper will be activated.
• If the transmission is in reverse and the
manual windshield wiper function is used (the lever is pushed upward), the liftgate wiper will also be activated for as long the lever is held up.
• If the liftgate wiper is already in normal wip- ing function, the normal wiping function will continue.
02
73
02 Instruments and controls
Steering wheel adjustment, Hazard warning flashers
Steering wheel adjustment
Check that the steering wheel is locked in the new position.
2. Press the button again to turn off the flash-
ers.
02
WARNING
NOTE
Never adjust the steering wheel while driv- ing.
Hazard warning flashers
• Regulations regarding the use of the
hazard warning flasher may vary, depending on where you live.
• The hazard warning flashers will be acti-
vated automatically if an airbag deploys.
Both the height and the reach of the steering wheel can be adjusted to a comfortable posi- tion for the driver. 1. Pull down the lever on the steering column
to release the steering wheel.
2. Adjust the steering wheel to a suitable
position.
3. Press the lever back into place to lock the steering wheel in the new position. If nec- essary, press the steering wheel slightly while pressing the lever into the locked position.
74
The four-way flasher should be used to indi- cate that the vehicle has become a traffic haz- ard. 1. Press the triangular button in the center
dash.
02 Instruments and controls
Parking brake (hand brake)
The parking brake lever is located between the front seats.
NOTE
4.
If the vehicle rolls, the parking brake lever must be pulled more firmly.
5. When parking a vehicle always put the gear selector in first gear (for manual transmis- sion) or P (for automatic transmission).
Parking on a hill • If the vehicle is pointing uphill, turn the front
wheels so that they point away from the curb.
• If the vehicle is pointing downhill, turn the front wheels so that they point toward the curb.
Releasing the parking brake 1. Press firmly on the brake pedal. 2. Pull the lever up slightly, press the button at the end of the lever and lower the lever completely.
The indicator light will illuminate even if the parking brake has only been partially applied.
WARNING
Pull up the parking brake lever up firmly to its full extent.
When applying the parking brake 1. Press firmly on the brake pedal. 2. Pull the parking brake lever up firmly to its
full extent.
3. Release the brake pedal and ensure that
the vehicle is at a standstill.
Parking brake
02
75
02 Instruments and controls
Power windows
Operation
02
Control panel in driver's door Power window controls
The power windows are controlled by buttons in the arm rests. • The ignition must be ON (ignition key in
position I, II or the engine running) for the power windows to function.
• The power windows will also function after the ignition has been switched off as long as neither of the front doors has been opened.
76
stop the window at any time, press the button down.
Power window control – front passenger's side
The control for the power window in the front passenger's door operates that window only.
Opening a window Lightly press down the front edge of either of the buttons (A) to the first detent ("stop") to open a window to the position of your choice.
WARNING
• Always remove the ignition key when
the vehicle is unattended.
• Never leave children unattended in the
vehicle.
• Make sure that the windows are com- pletely unobstructed before they are operated.
1. Press the front part of any of the buttons (A) as far down as possible and release to automatically open the window com- pletely.
2. To stop the window at any time, pull the
button up.
Closing a window 1. Lightly pull up the front edge of any of the
buttons (A) to the first detent ("stop") to close a window to the position of your choice.
2. Pull the front part of any of the buttons (A) up as far as possible and release to auto- matically close the window completely. To
Rearview mirror
Rearview mirror with compass*
Calibrating the compass
Mirrors
02
02 Instruments and controls
Day/night control
Normal position
Night position, reduces glare from follow- ing traffic
Night position To reduce glare from the headlights of follow- ing vehicles, use control (1) to switch between the normal and night-driving positions.
Auto-dim function* An optional integrated sensor reacts to head- lights from following traffic and automatically reduces glare.
The upper right-hand corner of the rearview mirror has an integrated display that shows the compass direction toward which the car is pointing. Eight different directions can be dis- played: N, NE, E, SE, S, SW, W and NW. The display shows your car's orientation with respect to true north.
The earth is divided into 15 magnetic zones. The compass is initially set for the zone to which the car was delivered, and should always be adjusted if the car is driven to a new magnetic zone. A "C" will be displayed if cali- bration becomes necessary. To calibrate the compass: 1. Stop the car in a large, open area, away
from traffic.
2. Using a pen or similar object, hold the but-
ton (1) depressed for at least 6 sec- onds. "C" will be displayed.
* Option/accessory, for more information, see Introduction.
``
77
02 Instruments and controls
Mirrors
02
Power door mirrors
Magnetic zones 3. Press button (1) for at least 3 seconds to
display the number of the current magnetic zone.
4. Press button (1) repeatedly until the num- ber for the required geographical area (1– 15) is displayed. "C" will be displayed again.
5. Drive slowly in a circle at a maximum speed of 6 mph (10 km/h) until a compass direc- tion is displayed.
Calibration is complete.
The mirror control switches are located on the driver's door armrest.
Adjusting the mirrors
WARNING
• The mirrors should always be adjusted
prior to driving.
• Objects seen in the passenger's side wide-angle door mirror are closer than they appear to be.
Driver's door mirror: ± Press the L button (a light in the switch will go on) to activate the adjustment control.
78
* Option/accessory, for more information, see Introduction.
Use this control to adjust the driver's door mirror.
Passenger's door mirror: 1. Press the R switch (a light in the switch will go on) to activate the adjustment control. Use this control to adjust the passenger's door mirror.
2. After you have adjusted the mirror(s), press the L or R switch again (the LED will go out) to deactivate the adjustment control.
Storing the mirrors' position The position of the door mirrors is stored when the vehicle is locked. The next time the driver's door is unlocked with the same remote key and that door is opened within 2 minutes, the optional power driver's seat and side door mir- rors will automatically move to the position that they were in when the doors were most recently locked with the same remote key.
Folding power door mirrors* The mirrors can be folded in for parking/driving in narrow spaces. Folding the mirrors in 1. Press down the L and R mirror control but- tons on the driver's door at the same time. 2. Release them after approximately one sec- ond. The mirrors automatically fold in to the fully retracted position.
02 Instruments and controls
Mirrors
02
1. Fold in the mirrors by pressing the L and
R mirror control buttons on the driver's door at the same time.
2. Fold them out again by pressing the L and
R mirror control buttons.
This returns the mirrors to their original (neutral) positions.
Blind Spot Information System (BLIS)* The Blind Spot Information System (BLIS) is an information system that indicates the presence of another vehicle in the side-view mirror's "blind area." See page 161 for detailed infor- mation.
Folding the mirrors out Fold out the mirrors by pressing down the L and R buttons at the same time. The mirrors automatically fold out to the fully extended position. Automatic folding When the vehicle is locked/unlocked with the remote key or with the optional keyless drive system (see page 127), the power door mirrors with automatically fold in or out.
NOTE
The door mirrors will not fold out automati- cally when the vehicle is unlocked if they were folded in using the buttons on the driv- er's door control panel.
Fold mirr. when
This function can be activated/deactivated in Personal settings (see page 82). In the menu system, go to Car settings locking. Return to "neutral" position If a mirror has been inadvertently moved (bum- ped in a parking lot, etc.) from its original (neu- tral) position, it must be moved back to this position before automatic folding will function again. To do so:
* Option/accessory, for more information, see Introduction.
79
02 Instruments and controls
Power moonroof*
Operating the moonroof
02
Moonroof control in the ceiling console
To operate the moonroof, the ignition key must first be turned to the intermediate or drive posi- tion (position I, II or the engine running). The moonroof can be opened in two ways:
Tilt position
Sliding moonroof
