2011 Subaru Legacy and Outback Navigation System Owners Manual

• If 6 A confirmation message is displayed while deleting the registration, and another confirmation message is dis- played when the deletion process is successful.

NOTE • After the deletion is completed, another registered Bluetooth audio device is

not automatically connected.

• Deletion cannot be performed while a hands-free phone is receiving a call or

when talking on a hands-free phone.

Connecting the Bluetooth audio device auto- matically

Setting the audio

The Bluetooth audio device that was already registered in the system can be automatically connected.

NOTE • If the connection method was set to "From portable player", operating the Bluetooth audio device is required for connection after the ignition key is turned to the ACC or ON position.

• Automatic connection will not be performed if no Bluetooth audio device is

registered. 1 Select

(set up).

The "setup" menu is displayed.

2 Select

(BT audio).

Audio and Visual 213

Legacy_B2462BE-A.book Page 214 Wednesday, April 22, 2009 5:32 PM

Setting the audio 3 Select

(on) of the "Auto Bluetooth connect", and

then select

(save).

NOTE Select ting.

(default) to use the default of the automatic connection set-

Setting the connection method of the Bluetooth audio device

The connection method (connecting from either the system or Blue- tooth audio device) can be set up independently on each registered Bluetooth audio device. 1 Select

(select portable player).

214 Audio and Visual

Legacy_B2462BE-A.book Page 215 Wednesday, April 22, 2009 5:32 PM

2 Select the Bluetooth audio device to be set.

Select select

(ok).

(portable player information), and then

3 Select

(from vehicle) or (from portable player), and then select

(save).

: Connection is performed from the vehicle. : Connection is performed from the player.

Referring to the device information of the Blue- tooth audio system

Setting the audio

Perform the following to refer to and edit the information of the Blue- tooth audio system stored in the in-vehicle equipment and the infor- mation of the Bluetooth audio devices that were already registered.

■ In-vehicle equipment information display 1 Select

(set up).

Audio and Visual 215

Editing the device information of the Bluetooth audio system

Perform the following procedure to edit the information of the in-vehi- cle equipment that has already been registered.

■ Device name editing 1 Select 2 Select

(set up) and select

(BT audio).

(edit) of the device name.

Legacy_B2462BE-A.book Page 216 Wednesday, April 22, 2009 5:32 PM

Setting the audio 2 Select

(BT audio).

3 The device information is displayed.

216 Audio and Visual

Legacy_B2462BE-A.book Page 217 Wednesday, April 22, 2009 5:32 PM

3 Input a new device name, and then select

(ok).

4 Select

(save).

NOTE Select ting.

(default) to use the default of the automatic connection set-

Setting the audio

■ Pass-key editing 1 Perform steps 1 and 2 in the previous section, and then

display the editing screen.

2 Select

(edit) of "Pass-key".

3 Input a new pass-key, and then select

(ok).

Audio and Visual 217

Legacy_B2462BE-A.book Page 218 Wednesday, April 22, 2009 5:32 PM

Setting the audio 4 Select

(save).

2 Select

(A/V-IN).

NOTE Select

(default) to use the default setting.

Setting the A/V-IN

The procedure to set up external input sources is given in this section. 1 Select

(set up).

3 Select the external input source to be switched.

(video) is selected, the key name of the external

When input source turns to "VIDEO" and video sources (video screens) can be selected. When source turns to "AUX" and auxiliary sources screens can be selected.

(aux) is selected, the key name of the external input

218 Audio and Visual

Legacy_B2462BE-A.book Page 219 Wednesday, April 22, 2009 5:32 PM

Voice Activation

Legacy_B2462BE-A.book Page 220 Wednesday, April 22, 2009 5:32 PM

Voice activation system

The voice recognition function allows you to operate the nav- igation system, audio system and hands-free phone system using your voice instead of display screen handling. This sec- tion includes instructions about how to perform the voice commands. The commands that can be recognized by this system are restricted. (See Page 222.) For each function, refer to the corresponding items.

■ Correct voice recognition The circumstance of the interior of the vehicle will adversely affect the correct recognition of the voice. Note the following items in order for the system to correctly recognize the voice. • Speak clearly into the microphone. Speaking faster or slower and

pausing between words will cause incorrect recognition.

• Close the windows to eliminate outside noise. Traffic noise, driving

sounds and wind noise may affect the correct recognition of the voice.

• Speak the voice commands correctly. The commands that can be recognized by this system are restricted. Any terms other than the recognized terms for the system or dull sounds that are incorrectly spoken will not be recognized by the system. If the name of a facility is pronounced differently from the recognized terms for the system, the command will not be recognized by the system.

• The microphone is located at the best distance and in the best direc- tion for each model to gain the maximum voice recognition perfor- mance. Speak commands in the correct driving posture.

• Do not speak commands during navigation voice guidance or voice

recognition talk back. This causes sounds to overlap and results in incorrect voice recognition.

220 Voice Activation

Basic operations of voice recognition

1 Press the

button located on the steering switch.

The voice recognition mode is activated, and the icon for voice recognition will be displayed on the upper left side of the screen.

2 While the icon is displayed, speak a voice command.

During the voice recognition mode, the sound from the audio sys- tem is muted.

Legacy_B2462BE-A.book Page 221 Wednesday, April 22, 2009 5:32 PM

(voice input waiting mode): shows the status of waiting for a voice command.

(during a calculation): shows the status of accepting and processing a voice com- mand.

After a voice command is spoken, the system recognizes the voice and activates the function input by the voice command. Then the system will announce the operated function during voice recognition talk back. Pressing the voice recognition will cancel the voice recognition mode.

button located on the steering wheel during

Voice activation system

Voice Activation 221

Legacy_B2462BE-A.book Page 222 Wednesday, April 22, 2009 5:32 PM

Voice command list

The voice commands that are available for the voice recogni- tion function are listed in this section. Speak the voice com- mands correctly. The commands that can be recognized by this system are restricted. Any terms other than the recog- nized terms for the system or dull sounds that are incorrectly spoken will not be recognized by the system. If the name of a facility is pronounced differently from the recognized terms for the system, the command will not be recognized by the system.

■ Types of commands 1. Common

Operation commands that are common to the system

2. Shortcut

Commands to switch the screen

3. Function direct (map operation)

Commands to perform the functions of "map operation"

4. Function direct (POI)

Commands to perform the functions of "POI"

5. Function direct (destination)

Commands to perform the functions of "destination setting"

6. Function direct (guidance)

Commands to perform the functions of "guidance"

7. Audio mode

Commands that can be used when an audio device that is compati- ble with the system is connected

222 Voice Activation

8. Audio radio

Commands that can be used when the current audio source is the radio

9. Audio media

Commands that can be used when the current audio source is a media device

10. Hands-Free Phone System

Commands to operate the Hands-Free Phone using voice recogni- tion

When the voice recognition system can recognize several phrases for a command, these phrases are distinguished by the following categories in this section. 1. Selection

Several phrases that can be recognized by the system for a command are shown with the mark "|". Example 1: A | B ..... A or B Example 2: A | B |C ..... A or B or C

2. Grouping

When the range of selection is limited, the beginning of the selection group is shown with the mark "(", and the end is shown with the mark ")". Example 3: (A | B) ..... The range of selection is limited to A | B. Example 4: A (B | C) ..... AB or AC

3. Omission

When some phrases can be omitted, the beginning of the omission is shown with the mark "[", and the end is shown with the mark "]". Example 5: [AB] ..... A and B can be omitted. Example 6: A (B | C [D]) ..... AB or AC or ACD

Legacy_B2462BE-A.book Page 223 Wednesday, April 22, 2009 5:32 PM

1. Common

button is briefly pressed, a beep (a single note)

• When the will sound and the voice recognition mode will start. • When the will be canceled.

button is pressed, the voice recognition mode

2. Shortcut

Commands to switch the screen Voice commands [Show] Map [Show] Current (Position | Location) Repeat [Voice][Guidance] Cancel

3. Function direct (map operation)

Commands to perform the functions of "map operation" Voice commands Zoom In Zoom Out Right [Screen] Map Zoom In Right [Screen] Map Zoom Out [Change to | Show] North up [Mode] [Change to | Show] Heading up [Mode] [Change] Map Direction Right [Screen] Map [Change to | Show] North up [Mode] Right Map [Change to | Show] Heading Up [Mode] Right [Screen] Map [Change] Map Direction [Change to] Dual Map [Mode]

Voice command list

[Change to] Single Map [Mode] Store This Point | Mark This Point | Memory Point Zoom In Maximum Zoom Out Maximum Right [Screen] Map (Zoom In Maximum | Minimum Scale) Right [Screen] Map (Zoom Out Maximum | Minimum Scale)

4. Function direct (POI)

Commands to perform the functions of "POI" Command (US English) (Automobile Club | Triple A) (Gas Station | Gas) (Parking | Parking Lot | Parking Garage | Car Park) (Auto Service & Maintenance | Auto Service) SUBARU DEALERSHIP ATM Bank (Town Center | City Center) Convention Center | Exhibition Center) Court House Government Offices (Higher Education | University | College) Hospital Library (Parks & Recreation | Park & Recreation) Police Station

Voice Activation 223

Legacy_B2462BE-A.book Page 224 Wednesday, April 22, 2009 5:32 PM

Voice command list

School Amusement Park Casino Golf Course Historical Monument Marina Museum (Ski Resort | Skiing) (Sports Complex | Stadium) Performing Arts Tourist Attraction Tourist Information Winery (Restaurant | I'm Hungry | Show Restaurant) (American Restaurant | American Food) (Chinese Restaurant | Chinese Food) (Continental Restaurant | Continental Food) (Fast Food | Fast Food Restaurant) (French Restaurant | French Food) (Italian Restaurant | Italian Food) (Japanese Restaurant | Japanese Food) (Mexican Restaurant | Mexican Food) (Seafood Restaurant | Seafood) (Thai Restaurant | Thai Food) (Other Restaurant | Other Food)

224 Voice Activation

Grocery Store Shopping Mall Airport Bus Station Ferry Terminal Hotel Rental Car Agency Rest Area Train Station Business Facility Convenience Store Department Store Home and Garden Pharmacy Specialty Food Store Other Retail Stores Car wash Campground Botanical/Zoological Gardens Cinema Horse Racing National and State Parks Speedway Video Rental Post Office

Legacy_B2462BE-A.book Page 225 Wednesday, April 22, 2009 5:32 PM

Other Financial Services Coffee House Dry Cleaning Health and Fitness Club Ice Cream Parlor Beauty and Barber shops The nearest POIs are listed from the next item. Nearest (Automobile Club | Triple A) Nearest (Gas Station | Gas) Nearest (Parking | Parking Lot | Parking Garage | Car Park) Nearest (Auto Service & Maintenance | Auto Service) Nearest SUBARU DEALERSHIP Nearest ATM Nearest Bank Nearest (Town Center | City Center) Nearest (Convention Center | Exhibition Center) Nearest Court House Nearest Government office Nearest (Higher Education | University | College) Nearest Hospital Nearest Library Nearest (Parks & Recreation | Park & Recreation) Nearest Police Station Nearest School Nearest Amusement Park

Voice command list

Nearest Casino Nearest Golf Course Nearest Historical Monument Nearest Marina Nearest Museum Nearest (Ski Resort | Skiing) Nearest (Sports Complex | Stadium) Nearest Performing Arts Nearest Tourist Attraction Nearest Tourist Information Nearest Winery Nearest (Restaurant | I'm Hungry | Show Restaurant) Nearest (American Restaurant | American Food) Nearest (Chinese Restaurant | Chinese Food) Nearest (Continental Restaurant | Continental Food) Nearest (Fast Food | Fast Food Restaurant) Nearest (French Restaurant | French Food) Nearest (Italian Restaurant | Italian Food) Nearest (Japanese Restaurant | Japanese Food) Nearest (Mexican Restaurant | Mexican Food) Nearest (Seafood Restaurant | Seafood) Nearest (Thai Restaurant | Thai Food) Nearest (Other Restaurant | Other Food) Nearest Grocery Store Nearest Shopping Mall

Voice Activation 225

Legacy_B2462BE-A.book Page 226 Wednesday, April 22, 2009 5:32 PM

Voice command list

Nearest Airport Nearest Bus Station Nearest Ferry Terminal Nearest Hotel Nearest Rental Car Agency Nearest Rest Area Nearest Train Station Nearest Business Facility Nearest Convenience Store Nearest Department Store Nearest Home and Garden Nearest Pharmacy Nearest Specialty Food Store Nearest Other Retail Stores Nearest Car wash Nearest Campground Nearest Botanical/Zoological Gardens Nearest Cinema Nearest Horse Racing Nearest National and State Parks Nearest Speedway Nearest Video Rental Nearest Post Office Nearest Other Financial Services Nearest Coffee House

226 Voice Activation

Nearest Dry Cleaning Nearest Health and Fitness Club Nearest Ice Cream Parlor Nearest Beauty and Barber shops Cancel No beeps / no items found by the voice recognition [Enter] Destination [Add to] Way Point [Show] list Set Other POI Off

5. Function direct (destination)

Commands to perform the functions of "destination setting" Command [Go] Home Cancel No beeps / no items found by the voice recognition [Enter] Destination [Add to] Way Point (Go to | Previous)(Starting | Start) Point Cancel No beeps / no items found by the voice recognition [Enter] Destination [Add to] Way Point

Legacy_B2462BE-A.book Page 227 Wednesday, April 22, 2009 5:32 PM

Set Other [Go to] Previous Destination Cancel No beeps / no items found by the voice recognition [Enter] Destination [Add to] Way Point Set Other [Go to] Preset Destination [Number] One Cancel No beeps / no items found by the voice recognition [Enter] Destination [Add to] Way Point [Go to] Preset Destination [Number] 2
Cancel No beeps / no items found by the voice recognition [Enter] Destination [Add to] Way Point [Go to] Preset Destination [Number] 3
Cancel No beeps / no items found by the voice recognition [Enter] Destination [Add to] Way Point [Go to] Preset Destination [Number] 4

Voice command list

Cancel No beeps / no items found by the voice recognition [Enter] Destination [Add to] Way Point [Go to] Preset Destination [Number] 5
Cancel No beeps / no items found by the voice recognition [Enter] Destination [Add to] Way Point

6. Function direct (guidance)

Commands to perform the functions of "guidance" Command Louder Softer [Change to] Arrow [Guide | Guidance | mode] [Change to] Turn List [Guide | Guidance | mode] [Show](Whole | Entire | Display) Route [Map] [Show] Next Way Point [Map] Show First Way Point [Map] Show Second Way Point [Map] Show Third Way Point [Map] Show Fourth Way Point [Map] Show Fifth Way Point [Map] Show Destination [Map] (Delete | Cancel) Next Way Point

Voice Activation 227

Legacy_B2462BE-A.book Page 228 Wednesday, April 22, 2009 5:32 PM

Voice command list

Yes No (Delete | Cancel) Destination Yes No (Delete | Cancel) All Way Points and Destination Yes No Voice Guidance Off Voice Guidance On Quick Short Alternative Detour Detour (Entire | Whole) Route [Change to] Freeway [Information] On [Change to] Junction Detail On [Change to] Compass mode [Change to] Freeway [Information] Off [Change to] Junction Detail Off

228 Voice Activation

7. Audio mode

Commands that can be used when an audio device that is compati- ble with the system is connected Command radio AM [radio] FM [radio] FM1
FM2
FM3
(Disc | CD | DVD | MP3 | WMA) Audio [on | off] Satellite radio SAT AUX | Auxiliary Video USB Audio iPod Bluetooth audio | BT audio

Legacy_B2462BE-A.book Page 229 Wednesday, April 22, 2009 5:32 PM

8. Audio radio

10. Hands-free

Voice command list

Commands that can be used when the current audio source is the radio Command Seek up Seek down Category up Category down

9. Audio media

Commands that can be used when the current audio source is a media device Command Track up | Next track Track down Previous track Folder up Folder down Group up Group down

Commands to operate the hands-free phone using voice recognition Command Dial by Name Dial by Number No beeps / no items found by the voice recognition Cancel Dial by Name Dial by Number No beeps / no items found by the voice recognition (cid:123)(cid:123)(cid:123) (Name) No beeps / no items found by the voice recognition Cancel Dial Next Candidate No beeps / no items found by the voice recognition Cancel (cid:123)(cid:123)(cid:123) (Number) No beeps / no items found by the voice recognition Cancel Correction Delete Dial (cid:123)(cid:123)(cid:123) (Number)

Voice Activation 229

Legacy_B2462BE-A.book Page 230 Wednesday, April 22, 2009 5:32 PM

Voice command list

230 Voice Activation

Legacy_B2462BE-A.book Page 231 Wednesday, April 22, 2009 5:32 PM

Hands-Free Phone System

Legacy_B2462BE-A.book Page 232 Wednesday, April 22, 2009 5:32 PM

Before using the Hands-Free Phone System

What can be made with the Hands-Free Phone System

It is possible to connect the Bluetooth Phone of which the operation has been confirmed to the in-vehicle equipment through the Bluetooth format (wireless) to make a phone call from the in-vehicle equipment or take an incoming phone call. Since the Bluetooth format is wireless, a connection between the in-vehicle equipment and the Bluetooth Phone can be made without placing them in the close vicinity of each other. The Bluetooth Phone can be used with it left in the breast pocket or bag.

The Bluetooth Phone that is compliant with the in-vehicle equipment must meet the following requirements. • Bluetooth Specification Ver. 1.1 or above (Ver. 1.2 or above is recom-

mended.)

• Corresponding Profiles are as shown below.

• HFP (Hands Free Profile) Ver. 1.0 (Ver. 1.5 or above is recommended.) • OPP (Object Push Profile) Ver. 1.1

"Bluetooth" is a trademark of Bluetooth SIG, Inc.

What cannot be done with the Hands-Free Phone System

In the following cases, the functions of the handsfree cannot be used. • While not in the phone call area. • While in the phone call being restricted due to the lines congested. • When the phone book data is being transmitted from the Bluetooth

Phone.

• When the Bluetooth Phone is being used, due to data communica-

tion.

• When the Bluetooth Phone is out of order. • When the Bluetooth Phone is not connected to the in-vehicle equip-

ment.

• When the battery of the Bluetooth Phone has run down. • When the power switch of the Bluetooth Phone is turned off. • When the Bluetooth Phone is not set to the handsfree mode. • When a changeover is made on the in-vehicle side from the phone

book transmission to the handsfree.

• When the Bluetooth Phone cannot be used for other reasons.

232 Hands-Free Phone System

Legacy_B2462BE-A.book Page 233 Wednesday, April 22, 2009 5:32 PM

Precautions to be taken when using the Bluetooth equipment

Please take note of the following when using the Bluetooth equipment.

CAUTION

Before using the Hands-Free Phone System

WARNING

• For safety's sake, the driver should avoid the operation of the

Bluetooth Phone while driving.

• Do not make a phone call while driving. When you have an

incoming call, bring your car to a stop in a safe place in a calm manner before taking the incoming phone call. When you have to absolutely take a phone call, tell the caller "I'll call you back" by handsfree. And then call him back after stopping the car in a safe place.

• The buttons for the touch screen that cannot be used are

displayed greyed out. Operating the navigation system while in driving could cause your attention to be distracted from the current traffic condi- tions. And in consequence, this could result in a severe or fatal accident. Follow the descriptions of all operations and the instructions for safety given in this manual without fail.

• Please comply with the instructions specified in the laws and regulations concerning the use of the telephone in the vehicle.

• Do not leave the Bluetooth Phone in the vehicle.

(The temperature in a sun-heated car may go up extremely high.)

• When using the Bluetooth Phone, be careful not to get it

close to the in-vehicle equipment. Getting it too close to the in-vehicle equipment may result in deterioration in tone quality or a poor connecting condition.

• The frequency band used by this equipment is the same

band on which other industrial, scientific and medical equip- ment such as microwave ovens, radio stations (a license required) to be used by the production line in the factory to identify movable bodies, specific small power radio stations (a license not required) and amateur radio stations (a license required) is being operated. (These three type radio stations mentioned above are hereinafter referred to as "other radio stations.") Before using this equipment, be sure to check to see if "other radio stations" are being operated in the vicin- ity. Should there be a detrimental radio interference from this equipment to "other radio stations," move the equip- ment to another location as soon as possible to avoid radio interference. The frequency band used by this equipment is in the 2.4 GHz zone. The FH-SS modulation is employed as a modulation method. The expected inflicting interference dis- tance is less than 10m. This equipment uses a full band and can avoid a band used by a movable body identification device.

Hands-Free Phone System 233

Legacy_B2462BE-A.book Page 234 Wednesday, April 22, 2009 5:32 PM

Before using the Hands-Free Phone System

NOTE • Depending on the type of cell phone that is used, the screen illumination of the cell phone remains on while the ignition switch is in the "ON" position. If this occurs, turn the illumination off by operating the cell phone settings. For cell phone setting information, refer to the cell phone owner's manual.

• Depending on the setting of the cell phone, the dial lock may activate after

connection. Deactivate the dial lock of the cell phone before use.

• Depending on the cell phone to be connected, operation and the sound vol-

ume may be different from those of cell phones currently used.

• When the ignition switch is turned to the "OFF" or "LOCK" position during a

call, the call may be disconnected or continued on the cell phone depending on the type of cell phone that is used. Note that operation of the cell phone may be necessary if the call is continued on the cell phone.

• Do not speak at the same time with the other party during a call. If you and the party speak at the same time, your voice may be difficult to be heard by the party and vice versa. This does not indicate that there is a malfunction.

• The receiver sound volume should be set as low as possible. Otherwise, the

party you are calling may notice an undesirable echo sound. Speak clearly and loudly.

• Your voice may be difficult to be heard by the party under the following con-

ditions. -Driving on a rough road. -Driving on an expressway. -Driving with a window open. -Air from the ventilator blows directly towards the microphone. -The sound coming from the fan of the heater/cooler is loud. -The cell phone is too close to the microphone.

• The sound quality may be degraded and noise or an echo will occur due to

the influence of the cell phone that is connected to the system or the circum- stances of the Bluetooth network.

• When another Bluetooth device (such as a portable audio device) is simulta- neously connected, noise may occur in the voice from the hands-free phone.

234 Hands-Free Phone System

Legacy_B2462BE-A.book Page 235 Wednesday, April 22, 2009 5:32 PM

Name of each part

The name of each part used by the functions of the handsfree is as shown below.

■ In-vehicle equipment Operating the touch switches displayed on the screen allows you to use the functions of the handsfree.

Before using the Hands-Free Phone System

■ Steering switches Pressing the phone call. Pressing the

button short allows you to answer an incoming

button short allows you to hang up the phone.

■ Microphone Used while in the phone call. (dealer option) For details, check with the dealer.

Hands-Free Phone System 235

Legacy_B2462BE-A.book Page 236 Wednesday, April 22, 2009 5:32 PM

Before using the Hands-Free Phone System

Phone voice

After making a phone call or having a phone call, you can talk over the phone through microphone and speaker.

• An incoming call notice and a voice output while in the phone call are output from the speaker on the driver's seat side and passenger’s seat.

• When a voice or an incoming call signal is issued by the handsfree,

the sound from the audio and the navigation system is muted.

236 Hands-Free Phone System

Legacy_B2462BE-A.book Page 237 Wednesday, April 22, 2009 5:32 PM

Various types of displays

(Phone) with the

Selecting plays the PHONE MENU screen, in which you can set and operate the functions of the handsfree. The explanation here is given of the various kinds of displays shown on the PHONE MENU screen.

button pressed dis-

Roaming display

Reception level display

Bluetooth connection status display

Battery indicator

Reception level display

This shows a rough standard of the reception level of radio waves. How- ever, this is not displayed while in the transmission of the phone book data.

Display:

Level:

Out of the range

Faint

Intense

Before using the Hands-Free Phone System

• When "Out of the range" is being displayed, you are now out of the service area, or in the location to which no radio waves get through. On occasions like this, you cannot use the Bluetooth Phone. Move to a location where a clear reception can be obtained.

• The reception level does not always conform to the display of the

Bluetooth Phone. The reception level may not be displayed for some model types.

Battery indicator

This shows a rough battery capacity of the Bluetooth Phone. However, this is not displayed while in the transmission of the phone book data.

Display:

Remaining amount:

None

Little

Full

• The display of the battery capacity may not sometimes conform to that of the Bluetooth Phone. And also, the battery capacity may not be displayed for some model types.

• This system is not provided with a charging function for a cell phone.

Hands-Free Phone System 237

Legacy_B2462BE-A.book Page 238 Wednesday, April 22, 2009 5:32 PM

Before using the Hands-Free Phone System

Bluetooth connection status display

Roaming display

This displays the Bluetooth connection status of the Bluetooth Phone. The Bluetooth Phone is correctly connected to the in-vehicle equip- ment. The Bluetooth Phone is connected to the in-vehicle equipment, but radio waves are weak. The Bluetooth Phone is not connected to the in-vehicle equipment. When using the handsfree, register the Bluetooth Phone and the in- vehicle equipment, and then connect them each other. (See "Register- ing the Bluetooth Phone" on Page 240)

Roaming is a service that provides a continuous use of the system by using the facilities of a company with which the telephone company ties up when you are out of the stipulated service area. When the roaming function is being used, "Rm" is displayed.

238 Hands-Free Phone System

Legacy_B2462BE-A.book Page 239 Wednesday, April 22, 2009 5:32 PM

When parting with your car

When using the handsfree, a lot of personal information is registered. When parting with your car, delete your personal information and data referring to the following. And data once deleted cannot be restored to their original state. Be careful not delete date mistakenly.

Deleting all the outgoing and incoming call history. (See Page 260.) Deleting all the phone book data. (See Page 273.) Deleting the registered Bluetooth Phone from the in-vehicle equip- ment. (See Page 275.) Changing the Device Name of the in-vehicle equipment displayed in the Bluetooth Phone. (See Page 277.) Changing the Pass-Key to be used when certificating the Bluetooth Phone. (See Page 283.)

Before using the Hands-Free Phone System

Hands-Free Phone System 239

Legacy_B2462BE-A.book Page 240 Wednesday, April 22, 2009 5:32 PM

Making preparations of the Hands-Free Phone System

Registering the Bluetooth Phone

To use the Bluetooth Phone in interlock with the in-vehicle equipment, it is necessary to register the Bluetooth Phone with the in-vehicle equipment in advance.

3 Select

(Bluetooth Settings).

NOTE It is possible to register up to five Bluetooth Phones with the in-vehicle equip- ment. However, Bluetooth Phones that can be used with the in-vehicle equip- ment are restricted only to those selected by the phone selection. 1 Press the 2 Select

(Phone).

button.

4 Select

(Register).

240 Hands-Free Phone System

Legacy_B2462BE-A.book Page 241 Wednesday, April 22, 2009 5:32 PM

5 Register the Bluetooth equipment from the Bluetooth Phone and then enter the PASS-KEY displayed on the screen for it to be transmitted. The device name of the Bluetooth Phone is displayed on the DEVICE LIST.

Making preparations of the Hands-Free Phone System

• With

(Autoconnect) set to "ON" on the DEVICE LIST screen in advance,

the in-vehicle equipment automatically accept the connection of the Bluetooth Phone. Selecting

(Autoconnect) makes a changeover between ON and OFF.

• When registering two or more Bluetooth Phones, it is necessary to select a Bluetooth

Phone for connection.

The Bluetooth Phone most recently registered is selected as a Bluetooth Phone to be used with the in-vehicle equipment.

NOTE • For detailed method for the transmission of the PASS-KEY from the Bluetooth Phone,

refer to the instruction manual of the Bluetooth Phone.

Hands-Free Phone System 241

Legacy_B2462BE-A.book Page 242 Wednesday, April 22, 2009 5:32 PM

Making preparations of the Hands-Free Phone System

Connecting the Bluetooth Phone

To use the Bluetooth Phone in interlock with the in-vehicle equipment, the Bluetooth Phone registered with the in-vehi- cle equipment is required to be connected to the in-vehicle equipment. When (Bluetooth connection status) is dis- played on the PHONE MENU screen, or when changing a Bluetooth Phone to be connected, conduct this operation.

With "Autoconnect" set to "ON" in advance, a connection is made auto- matically to the Bluetooth Phone most recently connected. It is recom- mended that "Autoconnect" is set to "ON" in advance. 1 Press the 2 Select

(Phone).

button.

3 Select

(Bluetooth Settings).

4 Select the Bluetooth Phone you want to connect.

242 Hands-Free Phone System

Legacy_B2462BE-A.book Page 243 Wednesday, April 22, 2009 5:32 PM

5 Select

(Connect).

Making preparations of the Hands-Free Phone System

NOTE • With

(Autoconnect) set to "ON" on the DEVICE LIST screen in advance, the in-vehicle equipment automatically accept the connection of the Bluetooth Phone. Selecting changeover between ON and OFF.

(Autoconnect) makes a

• When a connection has been made to another Bluetooth Phone, a confirma-

tion message is displayed. 6 Select

(Yes).

The Bluetooth Phone selected is connected by the Bluetooth.

Hands-Free Phone System 243

Legacy_B2462BE-A.book Page 244 Wednesday, April 22, 2009 5:32 PM

Speaking over the Hands-Free Phone System

Making a phone call Entering a phone number to make a phone call

3 Select

(Bluetooth Phone).

It is possible to select the in-vehicle equipment to enter a phone num- ber and make a phone call. 1 Press the 2 Select

(Phone).

button.

4 Select numeric keys to enter a phone number and then

select

244 Hands-Free Phone System

Legacy_B2462BE-A.book Page 245 Wednesday, April 22, 2009 5:32 PM

NOTE • Selecting

briefly allows you to enter "*." And then selecting

for

more than two seconds allows you to enter "+."

Making a phone call from the outgoing or incoming call history

Speaking over the Hands-Free Phone System

• Selecting 5 Select

allows you to delete a digit entered.

(Yes).

You have a phone call. Speak over the phone.

It is possible to make a phone call to a phone number in the outgoing or incoming call history. 1 Press the 2 Select

(Phone).

button.

3 Select

(Redial List) or

(Received Calls).

When the phone call is over, hang up the phone. (See Page 258.)

Hands-Free Phone System 245

Legacy_B2462BE-A.book Page 246 Wednesday, April 22, 2009 5:32 PM

Speaking over the Hands-Free Phone System 4 Select the phone number and then select

You have a phone call. Speak over the phone.

NOTE The following can be conducted from this screen. • It is possible to register a phone number with the phone book. (See Page

267.)

• It is possible to delete an outgoing or incoming call history. (See Page 260.) 5 Select

(Yes).

When the phone call is over, hang up the phone. (See Page 258.)

246 Hands-Free Phone System

Legacy_B2462BE-A.book Page 247 Wednesday, April 22, 2009 5:32 PM

Making a phone call from the phone book

3 Select

(Phone Book).

Speaking over the Hands-Free Phone System

It is possible to select a phone number from the phone book registered with the in-vehicle equipment to make a phone call.

NOTE It is possible to copy the data in the phone book from the phone book of the Bluetooth Phone into that of the in-vehicle equipment. (See Page 261.) 1 Press the 2 Select

(Phone).

button.

4 Select the name or phone number of a person to whom

you want to make a phone call.

• Selecting alphabets, numerical characters or [Others] displays a

phone book data to which the acronym has relevance.

• Selecting

scrolls the display to display a phone book data 5

positions ahead.

• Selecting

scrolls the display to display a phone book data 1

position ahead.

• Selecting

scrolls the display to display a phone book data 1

position behind.

Hands-Free Phone System 247

Legacy_B2462BE-A.book Page 248 Wednesday, April 22, 2009 5:32 PM

Speaking over the Hands-Free Phone System

• Selecting

scrolls the display to display a phone book data 5

position behind.

6 Select

(Yes).

You have a phone call. Speak over the phone.

NOTE The following can be conducted from this screen. • It is possible to register the phone book data. (See Page 263.) • It is possible to register the phone book data from the Bluetooth Phone. (See

Page 261.)

• It is possible to delete all the phone book data. (See Page 273.) 5 Select the phone number and then select

When the phone call is over, hang up the phone.

NOTE The following can be conducted from this screen. • It is possible to edit the phone book data. (See Page 269.) • It is possible to delete the phone book data. (See Page 271 and 273.)

248 Hands-Free Phone System

Legacy_B2462BE-A.book Page 249 Wednesday, April 22, 2009 5:32 PM

Making a phone call from the Speed Dial

3 Select

(Speed Dial).

Speaking over the Hands-Free Phone System

It is possible to select a phone number from the Speed Dial registered with the in-vehicle equipment to make a phone call. Up to 17 phone numbers can be stored in the memory.

NOTE To use the Speed Dial, the phone number needs to be registered onto Speed Dial beforehand. (See page 279) 1 Press the 2 Select

(Phone).

button.

4 Select the name or phone number of a person to whom you

want to make a phone call. You have a phone call. Speak over the phone.

Hands-Free Phone System 249

Legacy_B2462BE-A.book Page 250 Wednesday, April 22, 2009 5:32 PM

Speaking over the Hands-Free Phone System

When the phone call is over, hang up the phone.

Making a phone call to the phone number of the Memory Point

It is possible to make a phone call to the phone number registered as a memory point. 1 Press the 2 Select

(Phone).

button.

3 Select

(Memory Points).

When the Memory Points is not stored in the in-vehicle equip- ment,

(Memory Points) cannot be selected.

250 Hands-Free Phone System

Legacy_B2462BE-A.book Page 251 Wednesday, April 22, 2009 5:32 PM

4 Select the Memory Point.

5 Select

Speaking over the Hands-Free Phone System

6 Select

(Yes).

You have a phone call. Speak over the phone. When the phone call is over, hang up the phone. (See Page 258.)

• Selecting

scrolls the display to display a memory point 5

position ahead.

• Selecting

scrolls the display to display a memory point 1

position ahead.

• Selecting

scrolls the display to display a memory point 1

position behind.

• Selecting

scrolls the display to display a memory point 5

position behind.

• Selecting

(Attribute) sorts the memory points in the

order of shorter distances.

• Selecting

order.

• Selecting

order.

• Selecting

tered data order.

(Icon) sorts the memory points in icon

(Name) sorts the memory points in name

(Date) sorts the memory points in regis-

Hands-Free Phone System 251

Legacy_B2462BE-A.book Page 252 Wednesday, April 22, 2009 5:32 PM

Speaking over the Hands-Free Phone System

Making a phone call from the Bluetooth Phone

Making a call by the voice recognition system

It is possible to directly operate the Bluetooth Phone connected to the in-vehicle equipment to make a phone call. Even while speaking over the Bluetooth Phone, operating either of the following, when connected to the in-vehicle equipment, displays the handsfree screen in the in-vehicle equipment. • Press the phone switch. • Select In this case, it is not possible to conduct any operations in relation to the handsfree from the in-vehicle equipment.

(Phone) on the menu screen.

WARNING

For safety's sake, the driver should refrain from the operation of a cell phone while driving.

The voice recognition system allows you to make a call with your voice. Perform the following two calling methods by voice recognition. • Making a call using name recognition:

When the user speaks a name, the system searches for the phone number attached with a voice tag (user’s voice) that was registered for the name in the phone book.

• Making a call using phone number recognition:

When the user speaks a phone number, the system dials the number.

252 Hands-Free Phone System

Legacy_B2462BE-A.book Page 253 Wednesday, April 22, 2009 5:32 PM

Making a call using name recognition:

NOTE • When pressing the

button located on the steering wheel while the phone book screen is displayed, voice recognition (name recognition) for the hands-free phone system will start. The screen does not change.

• The terms that can be used for voice recognition (name recognition) for the

hands-free phone system are "Name", "Cancel", "Next candidate" and "Dial".

Speaking over the Hands-Free Phone System

Any display screen other than the phone book screen

“Pi”(BEEP)

Dial by Number

Dial by number has been chosen

“Pi”(BEEP)

Hands-Free Phone System 253

Legacy_B2462BE-A.book Page 254 Wednesday, April 22, 2009 5:32 PM

Speaking over the Hands-Free Phone System

Making a call using phone number recognition:

NOTE • When pressing the

button located on the steering wheel while the dial screen is displayed, voice recognition (phone number recognition) for the hands-free phone system will start. The screen does not change.

• The terms that can be used for voice recognition (name recognition) for the

hands-free phone system are "Name", "Cancel", "Next candidate" and "Dial".

Any display screen other than the dial screen

“Pi”(BEEP)

Dial by Number

Dial by number has been chosen

“Pi”(BEEP)

254 Hands-Free Phone System

Legacy_B2462BE-A.book Page 255 Wednesday, April 22, 2009 5:32 PM

Taking a phone call and declining a incoming call

When you have a phone call, the information of a caller is dis- played together with an incoming call sign. When the name of a caller is registered with the phone book, the name of the caller is displayed. On an occasion other than the above, a phone number is displayed. For a caller with no outgoing call notice, no information is displayed.

Speaking over the Hands-Free Phone System

Putting an incoming phone call on hold

It is possible to put an incoming phone call on hold to take it later. 1 Select

(Hold) or briefly press the

button of the steering switch.

2 When taking it later, select

button.

or briefly press the

When the phone call is over, hang up the phone. (See Page 258.)

Taking a phone call

It is possible to take an incoming phone call and talk over the phone. 1 Select

(Call) or press the

button of the

steering switch. You can take a phone call. Speak over the phone. When the phone call is over, hang up the phone. (See Page 258.)

Hands-Free Phone System 255

Legacy_B2462BE-A.book Page 256 Wednesday, April 22, 2009 5:32 PM

Speaking over the Hands-Free Phone System

Hanging up an incoming call before answering it (Denial of an incoming call)

It is possible to hang up an incoming call before answering it. And it is also possible, while putting a phone call on hold, to conduct the follow- ing operations to hang up the phone call. 1 Select

(Disconnect) or keep pressing the button of the steering switch for more than 2 sec-

onds. The phone call is hanged up.

256 Hands-Free Phone System

EN(Hokubei)_Legacy_05_Handsfree.fm Page 257 Tuesday, March 16, 2010 4:37 PM

Speaking over the phone Adjusting the tonal volume

It is possible to adjust the tonal volume. 1 While speaking over the phone, select either of the fig-

to

shown on the lower section of the

ures screen or press the volume adjusting switch of the steer- ing switch.

Speaking over the Hands-Free Phone System

Muting the voice on this side

It is possible to make your voice unheard to the other party (Mute). However, you can hear the voice of the other party. 1 Select

(Mute) while speaking over the phone.

NOTE The larger the figure you select, the larger the tonal volume.

Select

(Mute) again to cancel the mute.

Hands-Free Phone System 257

Legacy_B2462BE-A.book Page 258 Wednesday, April 22, 2009 5:32 PM

Speaking over the Hands-Free Phone System

Transmitting the phone call

Hanging up the phone

It is possible to transmit the phone call of the in-vehicle equipment to the Bluetooth Phone. And also, the phone call of the Bluetooth Phone can be transmitted to the in-vehicle equipment. 1 Select

(Speaker) while speaking over the

phone or putting the answer on hold.

Hang up the phone while speaking over the phone or after the phone call is over. 1 Select

or pressing the

button of the

steering switch for more than 2 seconds.

You can speak over the Bluetooth Phone.

NOTE It is also possible to hang up the phone on the Bluetooth Phone.

NOTE • While speaking over the Bluetooth Phone, the only operation that can be

made is to transmit the phone call again to the in-vehicle equipment.

• If you want to speak over the in-vehicle equipment, select

(Speaker).

258 Hands-Free Phone System

Legacy_B2462BE-A.book Page 259 Wednesday, April 22, 2009 5:32 PM

Using the outgoing or incoming call history

Checking the outgoing or incoming call history

It is possible to check the outgoing or incoming call history. 1 Press the 2 Select

(Phone).

button.

3 Select

(Redial List) or

(Received Calls).

4 Check the outgoing or incoming call history.

• The maximum number of calls in the history items that can be checked is five for each of the outgoing calls and the incoming calls.

• The history of phone calls directly sent out from the Bluetooth Phone and the history of phone calls received when not con- nected to the in-vehicle equipment are not displayed.

NOTE The following can be conducted from this screen. • It is possible to make a phone call to the number displayed. (See Page 245.) • It is possible to register a phone number with the phone book. (See Page

267.)

• It is possible to delete an outgoing or incoming call history displayed. (See

Page 260.)

Hands-Free Phone System 259

Legacy_B2462BE-A.book Page 260 Wednesday, April 22, 2009 5:32 PM

Using the outgoing or incoming call history

Deleting all the outgoing and incoming call history

Delete all the outgoing and incoming call history. History once deleted cannot be restored to its original state. 1 Press the 2 Select

(Phone).

button.

4 Select

3 Select

(Redial List) or

(Received Calls).

NOTE The following can be conducted from this screen. • It is possible to make a phone call to the phone number displayed. (See Page 245.) • It is possible to register a phone number with the phone book. (See Page 267.) 5 Select

(Yes).

260 Hands-Free Phone System

All of the outgoing or incoming call history are deleted.

NOTE It is necessary to delete the outgoing call history and the incoming call history separately.

Legacy_B2462BE-A.book Page 261 Wednesday, April 22, 2009 5:32 PM

Using the phone book

Registering the phone book data

Up to 1000 phone book data can be registered with the phone book of the in-vehicle equipment. Contents that can be registered as phone book data are as shown below.

• Name: It is possible to register up to 24 characters. They can be

clipped.

• Phone number 1, phone number 2: Up to 25 digits can be regis-

tered. Any letter other than "0 to 9, *, #" cannot be used.

•

istered.

(voice record: No.1) : A voice tag can be reg-

Transmitting the phone book of the Bluetooth Phone

It is possible to transmit the phone book data from the phone book of the Bluetooth Phone to that of the in-vehicle equipment. Phone book data that can be transmitted are as shown below. • Name

When the name of the phone book data of the Bluetooth Phone is in excess of 24 character, up to 24 characters from the start are regis- tered with the phone book of the in-vehicle equipment. When a non-corresponding character is registered in the name of the phone book data of the Bluetooth Phone, this is registered with the phone book of the in-vehicle equipment as a blank.

• Phone number 1
• Phone number 2

When more than 3 phone numbers are registered with the phone book data of the Bluetooth Phone, with two or more phone book data of the same name created, they are divided to be registered with the phone book of the in-vehicle equipment. When any letters other than "0 to 9, *, #" are included in the phone book data of the Bluetooth Phone, those relevant letters are deleted to be registered with the phone book of the in-vehicle equipment. When the phone book data of the Bluetooth Phone is a phone num- ber in excess of 25 digits, it is not registered with the phone book of the in-vehicle equipment.

Hands-Free Phone System 261

Legacy_B2462BE-A.book Page 262 Wednesday, April 22, 2009 5:32 PM

Using the phone book 1 Press the 2 Select

(Phone).

button.

4 Select

(Download).

3 Select

(Phone Book).

5 Select

(Add).

NOTE When there is a phone book data already in the phone book, select

(Overwrite) or (Overwrite) overwrites the existing phone book. And select-

(Add). Selecting

(Add) adds a phone book data to the existing phone book data as

ing a new data.

262 Hands-Free Phone System

Legacy_B2462BE-A.book Page 263 Wednesday, April 22, 2009 5:32 PM

6 Transmit the phone number data from the Bluetooth Phone.

Registering a new data with the phone book

Using the phone book

Register a new phone book data with the phone book. It is possible to register a name and up to 2 phone numbers as phone book data. 1 Press the istered. 2 Select

button to edit the phone book data reg-

(Phone).

The phone book data is displayed in the phone book

NOTE For detail method for transmitting the phone book data from the Bluetooth Phone, refer to the instruction manual of the Bluetooth Phone.

3 Select

(Phone Book).

Hands-Free Phone System 263

Legacy_B2462BE-A.book Page 264 Wednesday, April 22, 2009 5:32 PM

Using the phone book 4 Select

(New).

6 Enter the name of the phone book data and select

(OK).

5 Select

(Name).

• Selecting • Selecting selecting screen.

• Selecting selecting screen.

• Selecting • Selecting

deletes 1 character. (Others) displays other characters. Then displays the preceding or succeeding

or

(Sym.) displays figures and symbols. Then displays the preceding or succeeding

or

displays alphabets and symbols.

(Caps) allows you to make a changeover

between upper case and lower case.

NOTE The Name doesn't need to be entered. When not entered, the phone number is displayed on the phone book. And when not entered, proceed to step 7.

7 Select

(No.1) or

(No.2).

264 Hands-Free Phone System

Legacy_B2462BE-A.book Page 265 Wednesday, April 22, 2009 5:32 PM

8 Enter the phone number and select

(OK).

A phone book data is added.

Using the phone book

• Selecting

briefly allows you to enter "*" and selecting

for more than 2 seconds allows you to enter "+."

• Selecting

deletes 1 character.

9 Select

(OK).

Hands-Free Phone System 265

EN(Hokubei)_Legacy_05_Handsfree.fm Page 266 Friday, May 1, 2009 11:54 AM

Using the phone book

Voice tag registration

The user’s voice can be registered as a voice tag that is added to a phone number in the phone book. Voice tags will be stored in the sys- tem when you speak a party’s name after voice guidance is announced and the voice tag screen is displayed. A maximum of 20 voice tags can be registered in the system, and it takes a maximum of 5 seconds per registration. 1 Refer to the procedure of phone book data editing to go

to the editing screen.

2 Select

(Voice record).

NOTE • Select the phone number to be added with a voice tag.

266 Hands-Free Phone System

3 Select

(record), and then speak the preferred

voice tag to record it in the system.

NOTE • When the recording is completed, a message is displayed on the screen and voice guidance starts. When the recording has been completed, the system will announce via voice guidance whether the recording was completed cor- rectly or incorrectly. Press

(ok) to finish the registration procedure.

• Select a voice tag and press

(play) to play back the registered voice

tag.

• A confirmation message is displayed when selecting a voice tag and pressing

(delete). Press the

(yes) to delete the voice tag.

Legacy_B2462BE-A.book Page 267 Wednesday, April 22, 2009 5:32 PM

Registering data with the phone book from the outgoing or incoming call history

4 Select the phone number and then select

Using the phone book

It is possible to register a phone number of the outgoing or incoming call history with the phone book. 1 Press the 2 Select

(Phone).

button.

NOTE The following can be conducted from this screen. • It is possible to make a phone call to a phone number displayed. (See Page

245.)

• It is possible to delete an incoming or outgoing call history displayed. (See

Page 260.) 5 Select

(Name).

3 Select

(Redial List) or

(Received Calls).

Hands-Free Phone System 267

Legacy_B2462BE-A.book Page 268 Wednesday, April 22, 2009 5:32 PM

Using the phone book 6 Enter the name of a phone book data and select

7 Select

(OK).

(OK).

The phone number is registered with the phone book data.

• Selecting • Selecting selecting screen.

• Selecting selecting screen.

• Selecting • Selecting

deletes 1 character. (Others) displays other characters. Then displays the preceding or succeeding

or

(Sym.) displays figures and symbols. Then displays the preceding or succeeding

or

displays alphabets.

(Caps) allows you to make a changeover

between upper case and lower case.

268 Hands-Free Phone System

Legacy_B2462BE-A.book Page 269 Wednesday, April 22, 2009 5:32 PM

Editing or deleting a phone book data Editing a phone book data

3 Select

(Phone Book).

Using the phone book

It is possible to edit the name of a phone book data and a phone num- ber. 1 Press the 2 Select

(Phone).

button.

4 Select the phone book data you want to edit.

• Selecting alphabets, figures or

(Others) given in the upper section displays a phone book data to which the acro- nym has relevance.

• Selecting

scrolls the display to display a phone book data 5

positions ahead.

• Selecting

scrolls the display to display a phone book data 1

position ahead.

Hands-Free Phone System 269

Legacy_B2462BE-A.book Page 270 Wednesday, April 22, 2009 5:32 PM

Using the phone book

• Selecting

scrolls the display to display a phone book data 1

position behind.

• Selecting

scrolls the display to display a phone book data 5

positions behind.

NOTE The following can be conducted from this screen. • It is possible to register a phone book data. (See Page 263.) • It is possible to register a phone book data from the Bluetooth Phone. (See

Page 261.)

• It is possible to delete all the phone book data. (See Page 273.) 5 Select

(Edit).

6 Select an item you want to edit.

7 Enter a new data and select

(OK).

NOTE The following can also be conducted from this screen. • It is possible to delete a phone book data. (See Page 271 and 273.) • It is possible to make a phone call to the phone number selected. (See Page

247.)

NOTE For details of the editing method, refer to "Registering a new data with the phone book." (See Page 263.)

270 Hands-Free Phone System

Legacy_B2462BE-A.book Page 271 Wednesday, April 22, 2009 5:32 PM

8 Select

(OK).

Using the phone book

Selecting a phone book data to delete it

Select a phone book data registered and delete it.

The result of the edit is reflected in the phone book data.

NOTE A phone book data once deleted cannot be restored to its original state. 1 Press the 2 Select

(Phone).

button.

3 Select

(Phone Book).

Hands-Free Phone System 271

Legacy_B2462BE-A.book Page 272 Wednesday, April 22, 2009 5:32 PM

Using the phone book 4 Select a phone book data you want to edit.

5 Select

(Delete).

NOTE The following can be conducted from this screen. • It is possible to edit a phone book data. (See Page 269.) • It is possible to make a phone call to the phone number selected. (See Page

247.) 6 Select

(Yes).

• Selecting alphabets, figures or

(Others) given in the upper section displays a phone book data to which the acro- nym has relevance.

• Selecting

scrolls the display to display a phone book data 5

positions ahead.

• Selecting

scrolls the display to display a phone book data 1

position ahead.

• Selecting

scrolls the display to display a phone book data 1

position behind.

• Selecting

scrolls the display to display a phone book data 5

positions behind.

NOTE The following can be conducted from this screen. • It is possible to register a phone book data. (See Page 263.) • It is possible to register a phone book data from the Bluetooth Phone. (See

Page 261.)

• It is possible to delete all the phone book data. (See Page 273.)

272 Hands-Free Phone System

Legacy_B2462BE-A.book Page 273 Wednesday, April 22, 2009 5:32 PM

The phone book data selected is deleted.

Deleting all the phone book data

Using the phone book

It is possible to delete all the phone book data.

NOTE Phone book data once deleted cannot be restored to their original state. 1 Press the 2 Select

(Phone).

button.

3 Select

(Phone Book).

Hands-Free Phone System 273

Legacy_B2462BE-A.book Page 274 Wednesday, April 22, 2009 5:32 PM

Using the phone book 4 Select

5 Select

(Yes).

All the phone book data are deleted.

274 Hands-Free Phone System

Legacy_B2462BE-A.book Page 275 Wednesday, April 22, 2009 5:32 PM

Other Bluetooth settings

Deleting the registered Bluetooth Phone from the in-vehicle equipment

Delete the Bluetooth Phone registered with the in-vehicle equipment.

3 Select

(Bluetooth Settings).