2013 Subaru Impreza Owners Manual

4-10
4-10

4-11
4-11

4-11

4-11

4-11

4-11

4-12
4-12
4-12
4-12

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (206,1)

4-2 Climate control

Ventilator control & Center and side ventilators

Side ventilators 1) Open 2) Close

Center ventilators 1) Open 2) Close

To adjust the flow direction, move the tab. To open or close the ventilator, turn the thumb-wheel up or down.

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Climate control panel & Type A

Black plate (207,1)

Climate control 4-3

1)

3)

Temperature control dial (Refer to “Tem- perature control” F4-9.)

2) Air conditioner button (Refer

to “Air

conditioner control” F4-10.) Fan speed control dial (Refer to “Fan speed control” F4-10.)

4) Air inlet selection button (Refer to “Air

inlet selection” F4-10.)

5) Airflow mode selection dial

“Airflow mode selection” F4-8.)

(Refer

to

6) Rear window defogger button (Refer to

“Defogger and deicer” F3-80.)

– CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (208,1)

4-4 Climate control

& Type B

1)

Temperature control dial (Refer to “Auto- matic climate control operation (type B, C and D)” F4-7 and/or “Temperature con- trol” F4-9.)

3)

2) Air conditioner button (Refer

to “Air

conditioner control” F4-10.) Fan speed control dial (Refer to “Auto- matic climate control operation (type B, C and D)” F4-7 and/or “Fan speed control” F4-10.)

4) Air inlet selection button (Refer to “Air

inlet selection” F4-10.)

5) Airflow mode selection dial

(Refer “Automatic climate control operation (type B, C and D)” F4-7 and/or “Airflow mode selection” F4-8.)

to

6) Rear window defogger button (Refer to

“Defogger and deicer” F3-80.)

NOTE The controllable temperature range may vary depending on the regional specifications of the vehicle.

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

& Type C

Black plate (209,1)

Climate control 4-5

1) Airflow mode selection dial

“Airflow mode selection” F4-8.)

(Refer

to

2) Defroster button (Refer to “Airflow mode

selection” F4-8.)

3) Rear window defogger button (Refer to

“Defogger and deicer” F3-80.) Fan speed control dial (Refer to “Fan speed control” F4-10.)

4)

to “Air

5) Air conditioner button (Refer

conditioner control” F4-10.)

7)

6) Air inlet selection button (Refer to “Air

inlet selection” F4-10.) Temperature control dial (Refer to “Auto- matic climate control operation (type B, C and D)” F4-7 and/or “Temperature con- trol” F4-9.)

8) AUTO button (Refer to “Automatic cli- mate control operation (type B, C and D)” F4-7.)

9) OFF button (Refer to “Automatic climate control operation (type B, C and D)” F4- 7.)

– CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (210,1)

4-6 Climate control

& Type D

1)

Temperature control dial (Refer to “Auto- matic climate control operation (type B, C and D)” F4-7 and/or “Temperature con- trol” F4-9.)

2) Defroster button (Refer to “Airflow mode

selection” F4-8.)

3) Rear window defogger button (Refer to

“Defogger and deicer” F3-80.)

4) DUAL mode button (Refer to “Automatic climate control operation (type B, C and D)” F4-7 and/or “Temperature control” F4-9.) Fan speed control dial (Refer to “Fan speed control” F4-10.)

5)

6) Air conditioner button (Refer

conditioner control” F4-10.)

7) Air inlet selection button (Refer to “Air

to “Air

inlet selection” F4-10.)

9)

8) Airflow mode selection button (Refer to

“Airflow mode selection” F4-8.) Temperature control dial (front passen- ger’s side) (Refer to “Automatic climate control operation (type B, C and D)” F4- 7 and/or “Temperature control” F4-9.)

10) AUTO button (Refer to “Automatic cli- mate control operation (type B, C and D)” F4-7.)

11) OFF button (Refer to “Automatic climate control operation (type B, C and D)” F4- 7.)

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Automatic climate control operation (type B, C and D)

When this mode is selected, the fan speed, airflow distribution, air-inlet control, and air conditioner compressor operation are automatically controlled. To activate this mode, perform the following. NOTE . Operate the automatic climate con- trol system when the engine is running. . Even when cooling is not necessary, setting the temperature much lower than the current outlet air temperature turns on the air conditioner compres- sor automatically and the “A/C” indi- cator light on the control panel illumi- nates.

& Type B 1. Turn the airflow mode selection dial and fan speed control dial to the “AUTO” position. 2. Set the temperature control dial. NOTE . Each function can be individually set to the AUTO mode independently of the other functions. Any function set to

the preferred temperature using

the AUTO mode is controlled automa- tically. Any function not set to the AUTO mode can be manually adjusted as desired. . The controllable temperature range may vary depending on the regional specifications of the vehicle. 3. To turn off the climate control system, turn the fan speed control dial to the “OFF” position.

the preferred temperature using

& Type C and D 1. Depress the “AUTO” button. The indicator light “FULL AUTO” on the display illuminates. 2. Set the temperature control dial. NOTE . For type D, when the “DUAL” mode button is pressed, separate tempera- ture settings for the driver’s side and passenger’s side can be enabled (DUAL mode). To cancel the DUAL mode, press the “DUAL” mode button again. The temperature setting for the passenger’s side becomes the same as the setting for the driver’s side. . The controllable temperature range may vary depending on the regional specifications of the vehicle.

Black plate (211,1)

Climate control 4-7

. If you operate any of the buttons on the control panel other than the “OFF” button, rear window defogger button and temperature control dial(s) during FULL AUTO mode operation, the “FULL” indicator light on the control turn off and the “AUTO” panel will indicator light will remain illuminated. You can then manually control the system as desired using the button you operated. To change the system back to the FULL AUTO mode, press the “AUTO” button. 3. To turn off the climate control system, press the “OFF” button.

– CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

4-8 Climate control

& Temperature sensors

Interior air temperature sensor

1) 2) Solar sensor

The automatic climate control system employs several sensors. These sensors are delicate. treated

they are not

If

Black plate (212,1)

properly and become damaged, the sys- tem may not be able to control the interior temperature correctly. To avoid damaging the sensors, observe the following pre- cautions. – Do not subject the sensors to impact. – Keep water away from the sensors. – Do not cover the sensors.

The sensors are located as follows. – Solar sensor: beside the windshield defroster grille – Interior air temperature sensor: next to the steering column – Outside temperature sensor: near the front bumper opening

Manual climate control op- eration & Airflow mode selection To select the airflow mode: Type A, B and C: Turn the airflow mode selection dial. Type D: Press the airflow mode selection button. To select the defrost mode: Type A and B: Turn the airflow mode selection dial. Type C and D: Press the defroster button.

Airflow modes are as follows.

(Ventilation): Instrument panel outlets

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (213,1)

Climate control 4-9

both side windows to prevent fogging.)

and both side outlets of panel (Refer to “Defrosting” F4-10.)

the instrument

(Bi-level): Instrument panel outlets and foot outlets

(Heat-def): Windshield defroster outlets, foot outlets and both side outlets of the to “Defrosting” instrument panel F4-10.)

(Refer

(Heat): Foot outlets, both side outlets of the instrument panel and some through windshield defroster outlets (A small amount of air flows to the windshield and

(Defrost): Windshield defroster outlets

& Temperature control ! Type A Turn the temperature control dial over a range from the blue side (cool) to red side (warm) to regulate the temperature of airflow from the air outlets. ! Type B, C and D Turn the temperature control dial to set the preferred interior temperature. With the dial set to your preferred temperature, the system automatically adjusts the tempera- ture of air supplied from the outlets so that the preferred temperature is achieved and maintained. If the dial is turned fully counterclockwise, the system provides maximum cooling performance. is turned fully clockwise, the system provides maximum heating performance. NOTE . For type D, when the “DUAL” mode button is pressed, separate tempera- ture settings for the driver’s side and passenger’s side can be enabled (DUAL mode). To cancel the DUAL mode, press the “DUAL” mode button again. The temperature setting for the – CONTINUED –

the dial

If

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

4-10 Climate control

passenger’s side becomes the same as the setting for the driver’s side. . The controllable temperature range may vary depending on the regional specifications of the vehicle.

& Fan speed control The fan operates only when the ignition switch is in the “ON” position. Select the preferred fan speed by turning the fan speed control dial.

& Air conditioner control The air conditioner operates only when the engine is running. Press the air conditioner button while the fan is in operation to turn on the air conditioner. When the air conditioner is on, the “A/C” indicator light illuminates. To turn off the air conditioner, press the button again. NOTE For efficient defogging or dehumidify- ing in cold weather, turn on the air conditioner. However, the ambient temperature decreases to approxi- mately 328F (08C), the air conditioner compressor will stop operating.

if

& Air inlet selection Select the air inlet by pressing the air inlet selection button.

ON position (recirculation): Interior air is recirculated inside the vehicle. Push the air inlet selection button to the ON position for fast cooling with the air conditioner or when driving on a dusty road.

OFF position (outside air): Outside air is drawn into the passenger compartment. Push the air inlet selection button to the OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty.

WARNING

Continued operation in the ON posi- tion may fog up the windows. Switch to the OFF position as soon as the outside conditions are no longer dusty.

Black plate (214,1)

Defrosting & Type A and B Select the “ ” mode by turning the airflow mode selection dial to defrost or dehumidify the windshield and front door windows.

” or “

& Type C ” mode by pressing the the “ Select defroster button, or select the “ ” mode by turning the airflow mode selection dial to defrost or dehumidify the windshield and front door windows.

& Type D ” mode by pressing the the “ Select defroster button, or select the “ ” mode by pressing the airflow mode selection button to defrost or dehumidify the wind- shield and front door windows. NOTE . When the “ ” or “ ” mode is selected, the air conditioner compres- sor operates automatically regardless of the position of the air conditioner button to defrost the windshield more quickly. However the indicator on the air conditioner button will not illumi- nate. At the same time, the air inlet

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

selection is automatically set to the outside air mode. For type A climate control system, in this state:

– You cannot stop the air condi- tioner compressor by pressing the air conditioner button. – You cannot select the recircula- tion mode by pressing the air inlet selection button.

. For type C and D climate control system, after defrosting the windshield by pressing the defroster button “ ”, pressing the button again returns the system to the setting that had been selected before the defroster was acti- vated.

Operating tips for heater and air conditioner & Cleaning ventilation grille

Always keep the front ventilation inlet grille free of snow, leaves, or other obstructions to ensure efficient heating and defrosting. Since the condenser is located in front of the radiator, this area should be kept clean because cooling performance is impaired by any accumulation of insects and leaves on the condenser.

& Efficient cooling after parking

in direct sunlight

After parking in direct sunlight, drive with the windows open for a few minutes to allow outside air to circulate into the

Black plate (215,1)

Climate control 4-11

heated interior. This results in quicker cooling by the air conditioner. Keep the windows closed during the operation of the air conditioner for maximum cooling efficiency.

& Lubrication oil circulation in

the refrigerant circuit

Operate the air conditioner compressor at a low engine speed (at idle or low driving speeds) a few minutes each month during the off-season to circulate its oil.

& Checking air conditioning

system before summer sea- son

Check the air conditioner unit for refriger- ant leaks, hose conditions, and proper operation each spring. Have the air con- ditioning system checked by your SUBARU dealer.

& Cooling and dehumidifying in

high humidity and low tem- perature weather conditions Under certain weather conditions (high relative humidity, low temperatures, etc.) a small amount of water vapor emission from the air outlets may be noticed. This condition is normal and does not indicate any problem with the air conditioning – CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

4-12 Climate control

system.

& Air conditioner compressor

shut-off when engine is heavily loaded

To improve acceleration and gas mileage, the air conditioner compressor is designed to temporarily shut off during air condi- tioner operation whenever the accelerator is fully depressed such as during rapid acceleration or when driving on a steep upgrade.

& Refrigerant for your climate

control system

Your air conditioner uses ozone friendly refrigerant HFC134a. Therefore, the meth- od of adding, changing or checking the refrigerant is different from the method for CFC12 (freon). Consult your SUBARU dealer for service. Repairs needed as a result of using the wrong refrigerant are not covered under warranty.

Black plate (216,1)

Air filtration system

mance if not properly maintained.

& Replacing an air filter 1. Remove the glove box. (1) Open the glove box.

(2) Remove the damper shaft from the glove box.

Replace the filter element according to the replacement schedule as follows. This schedule should be followed to maintain the filter’s dust collection ability. Under extremely dusty conditions, the filter should be replaced more frequently. It is recommended that you have your filter checked or replaced by your SUBARU dealer. For replacement, use only a genuine SUBARU air filter kit.

Replacement schedule:

Every 12 months or 7,500 miles (12,000
km) whichever comes first

CAUTION

Contact your SUBARU dealer if the following occurs, even if it is not yet time to change the filter: . Reduction of the airflow through

the vents.

. Windshield gets easily fogged or

misted.

NOTE The filter can influence the air condi- tioning, heating and defroster perfor-

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (217,1)

Climate control 4-13

doing this, be careful not to damage the hinge.

CAUTION

The arrow mark on the filter must point UP.

(3) Push in the stoppers located on both sides of the glove box and then pull down the glove box as far as it will go.

2. Remove the air filter.

(4) Pull out the glove box horizontally and remove the hinge portion. When

3. Replace the air filter element with a new one.

4. Reinstall the glove box, and connect the damper shaft. 5. Close the glove box. 6. Attach the service label to the driver’s side door pillar.

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (2,1)

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Left Page

Model "ALL_MODEL_MEMO" EDITED: 2007/ 6/ 22

Antenna system .................................................. Roof antenna ...................................................... FM reception ....................................................... Installation of accessories.................................. Audio set ............................................................. Type A audio set (if equipped) ............................. Type B audio set (if equipped) ............................. Power and audio controls .................................. Power switch and volume control ........................ Sound controls and audio settings ......................

5-3
5-3
5-3
5-4
5-4
5-5
5-6
5-7
5-7
5-7
FM/AM radio operation ...................................... 5-11
5-11
5-11
5-11

FM selection ...................................................... AM selection ...................................................... Tuning ............................................................... HD RadioTM Technology (Digital AM and FM

Radio) (type B audio)........................................ 5-13

Displaying radio PS (Program Service Name) and

RT (Radio Text) ................................................ 5-14
Station preset .................................................... 5-15
CD player operation ........................................... 5-16
Play file.............................................................. 5-16
How to insert a CD ............................................. 5-16
How to play back a CD ....................................... 5-17
To select a track from the beginning ................... 5-17
Fast-forwarding and rewinding ........................... 5-17
Repeating .......................................................... 5-18
Random playback .............................................. 5-18
Scan (type A audio)............................................ 5-19
Display selection (type A audio).......................... 5-19
Folder selection ................................................. 5-20
How to eject a CD from the player ...................... 5-20

Black plate (9,1)

Audio

When the following messages are displayed....... Auxiliary input jack............................................ Precautions to observe when handling a

compact disc................................................... USB storage device / iPod® operations ........... Play file ............................................................. Connectable USB storage device ....................... Connectable iPod® models................................. Connecting USB storage device / iPod® ............. How to play back ............................................... To select a track from the beginning .................. To select a chapter from the beginning when

connecting iPod®............................................. Fast-forwarding and rewinding ........................... Repeating .......................................................... Random playback .............................................. SCAN (only when connecting USB storage

device) (type A audio) ......................................

Selecting category (only when connecting

iPod®) ............................................................. Display selection ............................................... Folder selection (only when connecting USB

storage device) ................................................

Setting the playing speed (only when the

audiobook is playing) (type B audio) ................ When the following messages are displayed....... Audio control buttons ....................................... MODE button..................................................... “ ” and “ ” switch .......................................... Volume control switch .......................................

5-20
5-21

5-22
5-24
5-24
5-24
5-24
5-25
5-26
5-26

5-26
5-26
5-26
5-27

5-28

5-28
5-28

5-29

5-29
5-29
5-30
5-30
5-30
5-31

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (10,1)

Audio

Bluetooth® audio ................................................ 5-31
Media format ...................................................... 5-32
Setting Bluetooth® audio .................................... 5-32
Bluetooth® audio operation................................. 5-33
Hands-free system (if equipped) ....................... 5-34
Tips for the Hands-free system ........................... 5-34
Certification for the Hands-free system ............... 5-35

Safety precautions............................................. Using the Hands-free system ............................. Bluetooth® setting ............................................. Screensaver (type B audio) .............................. Downloading pictures ........................................ Selecting pictures .............................................. Erasing pictures ................................................

5-36
5-37
5-46
5-49
5-49
5-49
5-49

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (223,1)

Audio 5-3

& FM reception Although FM is normally static free, reception can be affected by the surround- ing area, atmospheric conditions, station strength and transmitter distance. Build- ings or other obstructions may cause momentary static, flutter or station inter- ference. reception continues to be unsatisfactory, switch to a stronger station.

If

Antenna system & Roof antenna

CAUTION

. Be sure to remove the antenna rod before entering garages, parking towers and other loca- tions with low ceilings.

. Remove the antenna rod before washing your car at a car wash. If the antenna rod is left attached, it may scratch the roof.

. When reinstalling the removed antenna rod, be sure to fully tighten it.

1) Unscrew 2) Remove

The roof antenna is installed in the center at the rear part of the roof.

The antenna rod can be removed by unscrewing it from its base.

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

5-4 Audio

Installation of accessories

Always consult your SUBARU dealer before installing a citizen band radio or other transmitting device in your vehicle. Such devices may cause the electronic control system to malfunction if they are incorrectly installed or they are not suited for the vehicle.

if

Black plate (224,1)

Audio set

Your SUBARU may be equipped with one of the following audio sets. Refer to the pages indicated in this section for operat- ing details. NOTE If a cell phone is placed near the audio set, it may cause the audio set to emit noise when the phone receives calls. This noise does not indicate an audio set malfunction. Note that a cell phone should be placed as far as possible from the audio set.

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

& Type A audio set (if equipped)

Black plate (225,1)

Audio 5-5

The audio set will operate only when the ignition switch is in the “ACC” or “ON” position. . Power and audio controls: refer to page 5-7
. Radio operation: refer to page 5-11
. CD (compact disc) player operation: refer to page 5-16
. Auxiliary input jack: refer to page 5-21
. USB storage device/iPod® operation: refer to page 5-24
. Bluetooth® audio: refer to page 5-31
. Hands-free system: refer to page 5-34

– CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

5-6 Audio

& Type B audio set (if equipped)

Black plate (226,1)

The audio set will operate only when the ignition switch is in the “ACC” or “ON” position. . Power and audio controls: refer to page 5-7
. Radio operation: refer to page 5-11
. CD (compact disc) player operation: refer to page 5-16
. Auxiliary input jack: refer to page 5-21
. USB storage device/iPod® operation: refer to page 5-24
. Bluetooth® audio: refer to page 5-31
. Hands-free system: refer to page 5-34

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Power and audio controls & Power switch and volume

control

Type A and B audio

The dial is used for both power (ON/OFF) and volume control. The radio is turned ON and OFF by pressing the dial, and the volume is controlled by turning the dial.

& Sound controls and audio

settings

NOTE . SPEED VOLUME CONTROL (SVC) is a function that automatically adjusts the volume according to the vehicle speed. As the vehicle speed increases, the audio volume automatically in- creases to match the vehicle speed, in order to create a pleasant listening environment even as the driving noise increases. . For type B audio, SRS TruBass and FOCUS are equipped. . SRS Sound features:

(1) Sound originating from door

Black plate (227,1)

mount speakers can be heard at ear level (built in SRS FOCUS effect) (type B audio). (2) Ultra rich bass sound can be obtained from standard door mount speakers (built in SRS TruBass effect) (type B audio).

. TruBass, FOCUS, SRS and “ ” symbol are trademarks of SRS Labs, Inc. . TruBass and FOCUS technologies are incorporated under license from SRS Labs, Inc.

Audio 5-7

! Tone and balance control (type A

audio)

Type A audio

Each brief press of the “TUNE/TRACK/ CH” dial changes the control modes in the following sequence.

Choose the preferred level for each mode by turning the “TUNE/TRACK/CH” dial. The control function returns to the tune/ track/channel control mode after approxi- mately 5 seconds.

– CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (228,1)

5-8 Audio

! Other settings (type A audio)

! Audio settings (type B audio)

First menu Second menu

Third menu

Type A audio

the “MENU” button Each brief press of changes the control modes in the follow- ing sequence.

Choose the preferred settings for each mode by turning the “TUNE/TRACK/CH” dial.

The control function returns to the tune/ track/channel control mode after approxi- mately 5 seconds.

1. Press the “TUNE/TRACK/CH” dial to display “SETTING Menu”. 2. Operate the “TUNE/TRACK/CH” dial to select the preferred menu. You can select the menu as shown in the following chart.

Screen OFF Sound

Tone

—

—

Screen

Balance

SVC

SRS Sound

Brightness

Contrast

Screen Size Screen Saver

Bass

Mid

Treble

Balance

Fader

—

—

—

—

—

Picture Select

Picture Down- load

Picture Erase

BT Audio Setup

Pair Audio Player

Select Audio Player

Set Passkey

Delete Audio Player

HD ON/OFF

Initialize

Others

—

—

—

—

—

—

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

3. Operate the “TUNE/TRACK/CH” dial to select the preferred setting for each mode.

NOTE Only “Screen OFF” can be displayed while driving.

Black plate (229,1)

Audio 5-9

– CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

5-10 Audio

! Adjustable level of each mode

Mode

Volume

Volume control

AUX volume control

Tone and balance Bass control

Midrange control

Treble control

Balance

Fader

Other settings

SPEED VOLUME

Black plate (230,1)

Range of levels (displayed)

Default setting

Turn counterclockwise

Turn clockwise

0 to 40

0 to 40
−8 to +8
−8 to +8
−8 to +8
L9 to R9

R9 to F9

OFF to 2

15

15

OFF

ON

ON

13

For less volume

For less volume

For more volume

For more volume

For less bass sound

For more bass sound

For less midrange sound

For more midrange sound

For less treble sound

For more treble sound

Right channel attenuated

Left channel attenuated

Front attenuated

Rear attenuated

For less auto volume change For more auto volume change

OFF

OFF

ON

ON

For less brightness

For more brightness

For less contrast

For more contrast

BEEP (Type A audio)

OFF to ON

SRS Sound (Type B audio)

OFF to ON

Brightness (Type B audio)

Contrast (Type B audio)

0 to 15

0 to 15

Screen size (Type B audio)

Normal to Wide Wide

HD ON/OFF (Type B audio)

OFF to ON

ON

Normal

ON

Initialize (Type B audio)

Cancel to Initialize Cancel

Initialize

Wide

OFF Cancel

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (231,1)

Audio 5-11

FM/AM radio operation & FM selection

Type A and B audio

Press the “FM” button when the radio is off to turn on the radio. Press the “FM” button when the radio is on to select the preferred reception mode. Each time the “FM” button is briefly pressed the radio changes in the following sequence starting from the last radio band that you selected.

Type A audio:

Type B audio:

& AM selection

Type A audio

Type B audio

& Tuning ! Manual tuning

Type A and B audio

Press the “AM” button when the radio is off to turn on the radio. ! Type A audio Press the “AM” button when the radio is on to select AM reception starting from the last radio band and the last frequency interval that you selected. ! Type B audio Each time the “AM” button is briefly pressed the radio changes in the following sequence starting from the last radio band that you selected.

Turn the “TUNE/TRACK/CH” dial clock- wise to increase the tuning frequency and turn the “TUNE/TRACK/CH” dial counter- clockwise to decrease it. Each time the dial is turned, the frequency interval can be changed between 10 kHz in the AM mode and 0.2 MHz in the FM mode. ! Stereo indicator The stereo indicator “ST” (type A audio)/ “STEREO” (type B audio) will illuminate when an FM stereo broadcast is received.

– CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (232,1)

5-12 Audio

! Seek tuning (SEEK) Type A audio:

Seek up

Seek down

Type B audio:

Seek up

Seek down

” or “

If you press the “ ” button briefly, the radio will automatically search for a receivable station and stop at the first one it finds. This function may not be available when radio signals are weak. When this happens, perform manual tuning to select the preferred station.

! Scan tuning (SCAN)

! PTY (Program type) group tuning

(only FM reception)

Type A audio*1

Type B audio*2

*1: Press the button briefly. *2: Press and hold the button. If you press the “SCAN” button, the radio will switch to the scan mode. In this mode, the radio scans through the radio band until a receivable station is found. The radio will briefly stop at the station while displaying the frequency, after which scanning will continue until the entire band has been scanned. Press the “SCAN” button again to cancel the SCAN mode and to stop at any displayed channel. Automatic tuning may not function prop- erly if the station reception is weakened by distance from the station or proximity to tall buildings and hills.

Type A audio

Type B audio

Press the indicated button to change to the PTY selection mode. At this time, the PTY group that you are currently listening to (type A audio)/that you selected the last time (type B audio) will be displayed for 10
seconds. In the PTY selection mode, “PTY” is displayed on the screen. ! PTY (Program type) group selection In the PTY selection mode, perform the following procedures to change the PTY group by one step at a time.

Type A audio: Press the following but- tons.

PTY group up by one step

PTY group down by one step

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Type B audio: Turn the “TUNE/TRACK/ CH” dial.

! Seek in PTY (Program type) group Type A audio:

Seek up

Seek down

Type B audio:

1) PTY group up by one step 2) PTY group down by one step

This operation only changes the display. It does not change the station that is currently being received.

Seek up

Seek down

In the PTY selection mode, when the preferred PTY group has been selected, pressing the “SEEK” button “ ” seeks within that PTY group. The control function returns to the normal mode after approximately 10 seconds.

” or “

Black plate (233,1)

Audio 5-13

& HD RadioTM Technology (Di- gital AM and FM Radio) (type B audio)

HD Radio Technology is fueling the digital radio revolution in the United States and around the world. The digital technology enables broadcas- ters to offer new and unique FM content via HD2 / HD3 channels, crystal-clear sound and data services on both AM and FM bands - all free, with no subscrip- tion fee. HD Radio Technology manufactured un- der license from iBiquity Digital Corpora- tion. U.S. and Foreign Patents. HD Radio® and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp.

– CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

5-14 Audio

For more information, visit www.hdradio. com.

Press the button while receiving FM radio (except an analog broadcast). The next channel of the station that is being received will play. ! Mode selection Turn the “TUNE/TRACK/CH” dial and select the HD Radio ON mode (hybrid mode) or OFF mode (analog mode). ! iTunes® tagging To tag the received song, press and hold button. Connect an iPod® to the store the tagged song to the iPod®. When the iPod® is connected to iTunes®, you can purchase the tagged songs from the Apple® iTunes Music Store. iPod® that support For iTunes® tagging, to the following website: www.hdradio.com/tagging.php? id=itunes. ! HD Radio indicators Each indicator illuminates under the fol- lowing conditions. . The indicator illuminates while a digital broadcast is received during the HD Radio ON mode. . The “TAG” indicator illuminates when you can operate the iTunes® tagging.

the models of

refer

Black plate (234,1)

indicator

. The “LIVE” indicator illuminates when the “Ballgame” is received. . The “STEREO” illuminates when an FM stereo broadcast is received. . The “PTY” indicator illuminates during the PTY selection mode. ! About HD Radio NOTE . HD Radio Technology is a hybrid broadcasting system that employs di- gital and analog signals. . When the vehicle moves outside the digital broadcasting area (that is nar- rower than the analog broadcasting area due to the FCC output require- ments), the radio reception automati- cally changes from the digital signal to the analog signal. When the vehicle reenters the digital broadcasting area, the radio reception automatically changes from the analog signal to the digital signal. When in a digital mode the Logo will be in orange on the radio display. . Depending on the broadcasting sta- tion, a condition such as a sound delay, echo effect or skipping sound may occur. However, this does not indicate a malfunction. . Depending on the broadcasting area, the digital signal may not be

received in an area where the analog signal can be properly received, or the system frequently switches the chan- nels between the digital and analog signals. However, this does not indi- cate a malfunction. this frequent switching between digital and analog causes annoyance, set the radio to the analog mode (HD Radio off mode) that provides the same radio broadcasting quality as a conventional radio.

If

& Displaying radio PS (Pro-

gram Service Name) and RT (Radio Text)

Type A and B audio

! Type A audio If the PS (Program Service Name) and/or RT (Radio Text) are available, pressing the “TEXT” button changes the display among PS, RT and frequency. The default setting is “PS”. NOTE . The maximum number of characters that can be displayed for PS is 8. . The maximum number of characters that can be displayed for RT is 64.

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

. If RT is 13 characters or longer, press and hold the “TEXT” button in order to change the page. ! Type B audio Press the “TEXT” button to show the next page when the text is not fully displayed while the PSD (Program Service Data) or RT (Radio Text) service is received. NOTE . When the HD Radio function is turned on, PSD provides additional information about the broadcast. Text data such as “Title” and “Artist” is displayed on the screen. . When the HD Radio function is turned off (HD Radio off mode), the radio text is displayed on the screen while receiving the broadcasting sta- tion with RBDS (Radio Broadcast Data System).

& Station preset ! How to preset stations 1. Select the preferred reception mode. 2. Select the preferred station. 3. Press and hold one of the preset buttons (from ) to store the frequency. If the button is pressed briefly, the preceding selection will remain in the

to

Black plate (235,1)

Audio 5-15

vice). . When you use Auto-store, the new stations replace any stations pre- viously stored. . Interrupting Auto-store: If you acci- dentally press the button, you can cancel the Auto-store function before it has been completed as follows.

button

– switching to the other source mode – pressing the – switching to the other band – turning the “TUNE/TRACK/CH” dial – pressing the “SCAN” button ! Displaying and selecting preset

stations (type B audio)

memory.

NOTE . Up to six stations for each reception mode may be preset. . If the connection between the radio and battery is broken for any reason such as vehicle maintenance or radio removal, all stations stored in the preset buttons are cleared. this occurs, the preset buttons. ! Selecting preset stations 1. Select the preferred reception mode. 2. Press the preferred preset button (from

If is necessary to reset

) briefly.

to

it

1. Press and hold the button during AM/FM reception to display the radio screen. 2. Operate the “TUNE/TRACK/CH” dial to select the stations.

! Auto-store (type B audio) Using the Auto-store function, you can automatically store 6 stations on the current waveband (FM-AS or AM-AS) by pressing and holding the button. Use Auto-store to quickly find the stron- gest stations, for example when traveling through different reception areas. NOTE . When the HD Radio function is turned on, Auto-store cannot be used while receiving a broadcasting station with SPS (Supplemental Program Ser-

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

5-16 Audio

CD player operation

NOTE . Make sure to always insert a disc with the label side up. If a disc is inserted with the label side down, the player displays “CHECK DISC”. Refer to “When the following messages are displayed” F5-20. . If a disc is inserted during a radio broadcast, the disc will interrupt the broadcast. . After the last song finishes, the disc will automatically return to track 1 (the first track on the disc) and will auto- matically play back. . The player is designed to be able to play music CD-Rs and music CD-RWs, but it may not be able to play certain ones. . Mini CDs (i.e., 8 cm/3 inch CDs) are not supported, and if inserted, they will be immediately ejected. . CDs that can be played back are accompanied by the following restric- tions.

– Maximum number of folders: 255
– Maximum number of files in a folder: 255

– Maximum number of files on a CD: 510 (type A audio)/999 (type B audio)

& Play file NOTE . Copyright protected MP3/WMA/AAC files will not be played by the system. The player will automatically skip to the next file (track). . WMA9 Lossless, WMA9 Profes- sional and WMA9 voice cannot be played.

MP3: . Based on MPEG1, 2 and 2.5 Layer3
. Sampling rate (kHz): 48, 44.1, 32, 24, 22.05, 16, 12, 11.025, 8
. Bit rate (kbps): 8 to 320
. Supports variable bit rates

WMA (type A audio): . Based on Windows Media Audio 9
. Sampling rate (kHz): 48, 44.1, 32
. Bit rate (kbps): 32 to 192

WMA (type B audio): . Based on Windows Media Audio 7, 8
and 9
. Sampling rate (kHz): 48, 44.1, 32
. Bit rate (kbps): 32 to 192

Black plate (236,1)

AAC (type A audio): . Based on MPEG4 AAC . Sampling rate (kHz): 48, 44.1, 32, 24, 22.05, 16, 12, 11.025, 8
. Bit rate (kbps): 8 to 320
. Number of channels: 1 to 2ch

AAC (type B audio): . Based on MPEG2 AAC and MPEG4
AAC . Sampling rate (kHz): 48, 44.1, 32, 24, 22.05, 16, 12, 11.025, 8
. Bit rate (kbps): 8 to 320
. Number of channels: 1 to 2ch

& How to insert a CD Hold a disc with a finger in the center hole while gripping the edge of the disc, then insert it in to the slot (with the label side up) and the player will automatically pull the disc into position. NOTE DO NOT INSERT TWO DISCS INTO THE DISC INSERTION SLOT AT THE SAME TIME.

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

& How to play back a CD ! When there is no CD inserted Properly insert a CD. Refer to “How to insert a CD” F5-16. When a CD is loaded, the player will start playback of the CD, beginning with the first track. ! When CD is in the player Each brief press of button changes the modes in the following sequence.

the

*: For type A audio, “BT-A” is displayed.

When the CD mode is selected, the player will start playback.

Black plate (237,1)

& To select a track from the

beginning

& Fast-forwarding and rewind-

ing

Audio 5-17

Type A and B audio

Turn the “TUNE/TRACK/CH” dial clock- wise to skip to the beginning of the next track. Each time the dial the is turned, indicated track number will increase. Turn the “TUNE/TRACK/CH” dial counter- clockwise to skip to the beginning of the current track. Each time the dial is turned, the indicated track number will decrease. NOTE With an MP3, WMA or AAC: . Skipping past the last track will take you back to the first track in the folder. . Skipping past the first track will take you to the last track in the folder.

Type A audio:

Fast-forward

Rewind

Type B audio:

Fast-forward

Rewind

Press and hold the “ ” button to fast- forward the track. Release the button to stop fast-forwarding. Press and hold the “ ” button to rewind the track. Release the button to stop rewinding. NOTE . If you fast-forward to the end of the last track, fast-forwarding will stop and – CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

5-18 Audio

the player will start playback beginning with the first track. For an MP3, WMA or AAC folder, the player will start play- back beginning with the first track of the next folder. . If you rewind to the beginning of the first track, rewinding will stop and the player will start playback. For an MP3, WMA or AAC folder, the player will start playback beginning with the first track of the current folder.

& Repeating To repeat a track, briefly press the follow- ing button (“RPT” button) while the track is playing.

Type A audio

Type B audio

Each time you briefly press the button, the mode changes in the following se- quences.

Type A audio:

Type B audio:

NOTE . The “RPT” (type A audio)/“One PRT” (type B audio) indication refers to the repeat playback of a single track. It repeats the track that is playing. . The “F-RPT” (type A audio)/“Folder RPT” (type B audio) indication refers to the repeat playback of a folder. It the tracks in the repeats the all of folder. the function when the MP3/WMA/AAC for- mat track is playing. the track repeat-play mode, To cancel briefly press the “RPT” button and select CANCEL. The “RPT” indication will turn off, and the normal playback mode will be resumed.

is possible to select

It

Black plate (238,1)

NOTE The repeat-play mode will be cancelled if you perform any of the following steps. . Press the . Press the “SCAN” button (type A audio).

button.

& Random playback To playback tracks at random, press the following button (“RDM” button) while a track is playing.

Type A audio*1

Type B audio*2

*1: Press and hold the button. *2: Press the button briefly.

Each time you press the button, the mode changes in the following sequences.

Type A audio:

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Type B audio:

is possible to select

NOTE . The “RDM” (type A audio)/“Track RDM” (type B audio) indication refers to the random playback of the tracks. It randomly repeats the tracks on the CD. It the function when formats other than the MP3/WMA/ AAC format CD is playing. . The “F-RDM” (type A audio)/“Folder RDM” (type B audio) indication refers to the random playback in the folder. It randomly repeats the tracks in the folder. the function when an MP3/WMA/AAC for- mat track is playing. . The “D-RDM” indication refers to the random playback of a disc. It randomly repeats the tracks on the CD. is possible to select the function when an MP3/WMA format track is playing. To cancel the random playback mode, press the “RDM” button again and select CANCEL. The “RDM” indication will turn off, and the normal playback mode will be resumed.

is possible to select

It

It

Black plate (239,1)

Audio 5-19

NOTE Random playback will be cancelled if you perform any of the following steps. . Press the . Press the “SCAN” button (type A audio).

button.

equipment. . Turn the ignition switch to the “LOCK” position.

& Display selection (type A

audio)

& Scan (type A audio)

Type A audio

Type A audio

The scan mode lets you listen to the first 10 seconds of each track in succession. Press the “SCAN” button to start scanning upward beginning with the track following the currently selected one. After all tracks on the disk/folder have been scanned, normal playback will be resumed. To cancel the scan mode, press the “SCAN” button again. NOTE The scan mode will be cancelled if you perform any of the following steps. . Press the “RPT” button. . Turn the “TUNE/TRACK/CH” dial. . Press the “ “FOLDER/PTY/CAT” button. . Press the . Turn off

” side of the

the power of

the audio

” or “

button.

If you press the “TEXT” button during playback, the display will change as shown in the following sequence.

For CD-DA:

For MP3/WMA/AAC:

! Page (track/folder title) scroll If you press the “TEXT” button again and hold it, the title will be scrolled so you can see all of it.

– CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

5-20 Audio

NOTE . For type A audio, the display is designed to show titles as shown in the following items.

– When playing a CD-DA: 256 char- acters – When playing an MP3/WMA/AAC: 64 characters – When playing an iPod®: 255
characters

. If no operations are performed for 10
seconds, the screen that was displayed before pressing and holding the “TEXT” button will be shown.

Type A audio:

To select the next folder

To go back to the previous folder

Type B audio:

To select the next folder

To go back to the previous folder

& Folder selection NOTE . Selecting folders in this way is possible only within a single disc. . Only MP3/WMA/AAC folders are re- cognized when an attempt to select the next or previous folder is made. If no appropriate folder exists on the disc, pressing the “ ” side of the “FOLDER/PTY/CAT” button starts play- back beginning with the first track. Press the following buttons briefly.

” or “

& How to eject a CD from the

player

When a disc is being played back or when a disc is in the player, press the button. The disc will be ejected. NOTE . Avoid driving the vehicle with a CD sticking out. The CD may fall out due to vibration. . If you do not remove the ejected disc within approximately 15 seconds, a disc protection function will operate, automatically reloading the disc. In this case, the disc is not played.

Black plate (240,1)

& When the following mes-

sages are displayed

try to eject

If one of the following messages is displayed while operating the CD player, determine the cause based on the follow- ing information. If you cannot clear those messages, please contact your SUBARU dealer. ! When “PUSH EJECT” is displayed Press the button to eject the disc. Check the disc for damage or deforma- tion, and also check that the correct disc is inserted. Do not the disc forcibly. Mini CDs (i.e., 8 cm/3 inch CDs) are not supported, and if inserted, they will be immediately ejected and this message will be displayed. If the disc cannot be ejected or this message remains dis- played, please contact your SUBARU dealer. ! When “CHECK DISC” is displayed Press the button to eject the disc. Check that the disc is not damaged or scratched, and also check that the disc is inserted correctly. This message may appear when using some CD-RW discs. Check that the disc type (i.e., 8 cm/3 inch CDs are not supported) and data format are correct. This player can only play MP3, WMA and AAC data formats. If the disc cannot be ejected or this message

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

remains displayed, please contact your SUBARU dealer.

Auxiliary input jack

You can connect an external audio device to the vehicle’s audio system and play back audio via the vehicle’s speakers. An auxiliary (AUX) input jack is present in the center console. A stereo mini pin plug (3.5ø) can be inserted in this jack. The connection cable is available at electrical appliance or similar stores.

To use the AUX input jack: 1. Connect a portable audio player to the AUX input jack.

Type A and B audio

2. Press the “CD/AUX” button on the

Black plate (241,1)

Audio 5-21

to select

audio control panel the AUX mode. Refer to “When CD is in the player” F5-17. 3. Play back the portable audio player. Refer to the instruction manual for the portable audio player.

NOTE . The output sound of the portable audio player is not loud, and the sound via the vehicle’s speakers that are connected to the vehicle audio set may be very low. If you turn up the volume of the audio set, the volume becomes louder. However, when you change from one portable audio player to another one, the volume levels via the vehicle’s speakers may be signifi- cantly louder compared to the prior device. To avoid a large volume differ- ence, turn down the volume when you change between portable audio players. . In some cases, when the sound volume of the portable audio player is low, the sound quality may become impaired when you turn up the volume of the vehicle audio system. In this case, adjust the sound volume of the portable audio player. . In some cases, noise occurs be- cause of a bad connection between the – CONTINUED –

北米Model "A1140BE-A" EDITED: 2012/ 6/ 20

Black plate (242,1)

5-22 Audio