Login- Download PDF Manual
-
& MUTE button (models with-
out Hands-free system)
5-44 Audio
” button to skip forward in the ” button to
! With SAT mode selected Press the “ channel order. Press the “ skip backward in the channel order. The channel will be shown on the audio display.
& Volume control buttons
Models with Hands-free system
Press the “+” button to increase the volume. Press the “−” button to reduce the volume. A number indicating the volume will be shown on the audio display.
” button if you wish to
Press the “ immediately cut the volume to zero. The audio display will show “MUTE”. If you press the button again, the original return and “MUTE” sound volume will turns off.
Models without Hands-free system
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
Bluetooth® audio (type C audio)
This function enables you to play back audio sources recorded in Bluetooth® audio devices. You need to register the Bluetooth® audio device in the system before using it.
& Media format Bluetooth® audio devices cannot be connected if they are not compatible with the following Bluetooth® profiles. . A2DP (Advanced Audio Distribution Profile) . AVRCP (Audio/Video Remote Control Profile)
& Setting Bluetooth® audio 1. Select pressing the “MENU” button. 2. Perform the following procedure while “BT-A” is displayed.
the “BT-A SETUP” menu by
NOTE You cannot set a Bluetooth® audio while driving.
! Registering (pairing) device the “PAIR AUDIO” menu by 1. Select operating the “TUNE/TRACK/CH” dial. If a device is already registered, “MEMORY FULL” is displayed and the mode changes to the Bluetooth® audio setting mode. 2. After the passkey is shown on the display, the passkey into the cell phone. If you input the correct passkey, “PAIRED” is displayed and the registering procedure is finished. If you input an incorrect passkey, “FAILED” is displayed, the registering procedure was not suc- cessful and the mode changes to the Bluetooth® audio setting mode.
input
! Selecting device 1. Select the “SELECT AUDIO” menu by operating the “TUNE/TRACK/CH” dial. If no devices are registered, “EMPTY” is displayed and the mode changes to the Bluetooth® audio setting mode. 2. Select the “CONFIRM” menu by oper- ating the “TUNE/TRACK/CH” dial. If the device is connected, is displayed and the selecting procedure is finished. the device cannot be con- nected, “FAILED” is displayed and the selecting procedure was not successful.
“SELECTED”
If
Black plate (235,1)
Audio 5-45
! Setting passkey 1. Select the “SET PASSKEY” menu by operating the “TUNE/TRACK/CH” dial. After the currently set passkey is dis- played, a new passkey can be entered. 2. the “TUNE/TRACK/CH” dial. 3. Select the “CONFIRM” menu by oper- ating the “TUNE/TRACK/CH” dial. The new passkey is displayed, the passkey is changed and the mode changes to the Bluetooth® audio setting mode.
Input the new passkey by operating
! Deleting device 1. Select the “DELETE AUDIO” menu by operating the “TUNE/TRACK/CH” dial. If no devices are registered, “EMPTY” is displayed and the mode changes to the Bluetooth® audio setting mode. 2. Select the “CONFIRM” menu by oper- ating the “TUNE/TRACK/CH” dial. “DE- LETED” is displayed and the mode changes to the Bluetooth® audio setting mode.
& Bluetooth® audio operation NOTE Depending on the connected device, it may not activate as per the following items or not work smoothly.
– CONTINUED –
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-46 Audio
! How to play back Press the “CD/AUX” button and select the “BT-A” mode. ! To select a track from its beginning Select a track in the same way that a track is selected when a CD is played. Refer to “To select a track from its beginning” F5- 26. ! Repeating Repeating is operated in the same way a CD is played. Refer to “Repeating” F5-28. Each time you briefly press the “RPT/ RDM” button, the mode changes in the following sequence.
! Random playback Random playback is operated in the same way a CD is played. Refer to “Random playback” F5-29. Each time you press the “RPT/RDM” button for 0.5 second or longer, the mode changes in the following sequence.
! Display selection Select an indication in the same way that an indication is selected when a CD is played. Refer to “Display selection” F5- 30. Each time you briefly press the “TEXT” button, the indication changes in the following sequence.
! Folder selection Select a folder in the same way that a folder is selected when a CD is played. Refer to “Folder selection” F5-31.
Black plate (236,1)
Hands-free system (if equipped)
NOTE . For models with the genuine SUBARU navigation system, refer to the Owner’s Manual supplement for the navigation system. . When selling your vehicle, make sure that you initialize the Hands-free system to prevent personal data from being improperly accessed. The Hands-free system operates while the ignition switch is in the “Acc” or “ON” position.
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
& Tips for the Hands-free sys-
tem
! Bluetooth®
NOTE The Bluetooth word mark and logo are registered trademarks of Bluetooth SIG, Inc. It is possible to connect a cell phone to the in-vehicle equipment through the Blue- tooth® format (wireless) to make a phone call from the in-vehicle equipment or take an incoming phone call. Since the Bluetooth® format is wireless, a connection between the in-vehicle equip- ment and the cell phone can be made without placing them in close proximity of each other. The cell phone can be used
with it left in the breast pocket or bag. NOTE . The Hands-free system may not operate properly under the following conditions.
in the
– The cell phone is turned off. – The cell phone is not phone call area. – The battery of the cell phone has run down. – The cell phone is not connected to the Hands-free system. – The cell phone is behind the seat or in the glove box. – A metal material covers or touches the cell phone.
. Depending on the type of cell phone that is used, the screen on the cell phone may remain illuminated while the ignition switch is in the “ON” position. If this occurs, turn the illumi- nation off by adjusting the cell phone settings. . Depending on the setting of the cell phone, the dial lock function may be activated after making a call. Deacti- vate the automatic dial lock function of the cell phone before using the Hands- free system. . Depending on the type of cell phone that is used, operation and the sound
Black plate (237,1)
Audio 5-47
volume may be different from those of cell phones currently used. . When the ignition switch is turned to the “LOCK” position during a call, the call may be disconnected or continued on the cell phone depending on the type of cell phone that is used. Note that operation of the cell phone may be necessary if the call is continued on the cell phone. . Do not speak at the same time as the other party during a call. If you and the party speak at the same time, it may be difficult for the other party to hear your voice and vice versa. This is normal. . The receiver sound volume should be set as low as possible. Otherwise, the party you are calling may notice an undesirable echo sound. . Speak clearly and loudly. . Your voice may be difficult to be heard by the party under the following conditions.
– Driving on a rough road. – Driving at a high speed. – Driving with a window open. – When air from the ventilator blows directly towards the micro- phone. – When the sound coming from the ventilator is loud.
– CONTINUED –
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-48 Audio
– When the cell phone is too close to the microphone.
. The sound quality may degrade due to the influence of the cell phone that is connected to the system or the circum- stances of the Bluetooth network. . When another Bluetooth® device is simultaneously connected, noise may be heard in the voice coming from the hands-free phone. ! Corresponding profiles for the cell
phone
. HFP (Hands Free Profile): Ver. 1.0
. OPP (Object Push Profile): Ver. 1.1& Certification for the Hands-
free system
CAUTION
FCC WARNING Changes or modifications not ex- pressly approved by the party re- sponsible for compliance could void the user’s authority to operate the equipment.
NOTE This device complies with Part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) this de- vice may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
it
if
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment interference to may cause harmful radio communications, is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter- ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter- ference by one or more of the following measures. . Reorient or relocate the receiving antenna. . Increase the separation between the
Black plate (238,1)
the dealer or an experi-
equipment and receiver. . Connect the equipment into an out- let on a circuit different from that to which the receiver is connected. . Consult enced radio/TV technician for help. . Changes or modifications not ex- pressly approved by the party respon- sible for compliance could void the user’s authority to operate the equip- ment. . This equipment complies with FCC/ IC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply with- out maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (ex- cluding extremities: hands, wrists, feet and ankles). . This transmitter must not be co- located or operated in conjunction with any other antenna or transmitter.
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
& Safety precautions
WARNING
. For safety reasons, avoid operat- ing the cell phone while driving. . Do not make a phone call while driving. When you have an in- coming call, stop the vehicle in a safe location before taking the incoming phone call. When you have to absolutely take a phone call, tell the caller “I’ll call you back”. And then call the caller back after stopping the vehicle in a safe location.
CAUTION
. Do not leave the cell phone in the vehicle. The temperature in the vehicle may become extremely high and cause a malfunction of the cell phone.
. When using the cell phone, be careful not to get it close to the in-vehicle equipment. Getting it too close to the in-vehicle equip- ment may result in deterioration in tone quality or a poor connect- ing condition.
. In the frequency band used by this equipment, along with indus- trial, scientific and medical equipment such as a microwave oven, radio stations (a license is required) to be used by the production line in the factory to identify movable bodies, specific small power radio stations (a license is not required) and ama- teur radio stations (a license is required) are being operated. (These three types of radio sta- tions are hereinafter referred to as “other radio stations.”) Before using this equipment, be sure to check to see if “other radio stations” are being operated in the vicinity. If there is detrimental radio interference from this equipment to “other radio sta- tions,” move the equipment to another location as soon as possible to avoid radio interfer- ence. The frequency band used by this equipment is in the 2.4
GHz zone. The FH-SS modulation is employed as a modulation method. The expected inflicting interference distance is less than 33 ft (10 m). This equipment uses a full band and can avoid a bandBlack plate (239,1)
Audio 5-49
used by a movable body identifi- cation device.
& Using the Hands-free system NOTE You can select the menus by operating the “TUNE/TRACK/CH” dial or using the voice command system. Refer to “Menu list of the Hands-free system” F5-55 or “Voice command system” F5-58. ! Turning on/off the Hands-free mode
1) OFF hook switch 2) ON hook switch 3)
Talk switch
To turn on the Hands-free mode, press the
– CONTINUED –
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-50 Audio
Black plate (240,1)
. To turn off
OFF hook switch the Hands-free mode, press the ON hook switch ! Preparation for using the Hands-
free system
Before using the Hands-free system, it is necessary to register a cell phone in the system. Perform the following procedure to register a cell phone. 1. Press the OFF hook switch “ENGLISH”/“FRANÇAIS” by 2. Select operating the “TUNE/TRACK/CH” dial. Then “WELCOME!” will be displayed. 3. Press the “TUNE/TRACK/CH” dial or the talk switch 4. Select the “RECORD NAME” menu. 5. Say the name to be registered. the “CONFIRM” menu. After 6. Select “CAR M_MEDIA” is displayed, a pass key is displayed. 7. Input the displayed pass key into the cell phone while “PKY: ****” is displayed. If you input the correct pass key, “PAIRED” is displayed and the registration proce- dure is finished. If you input an incorrect pass key, “FAILED” is displayed and the registration procedure was not successful.
! Updating phonebook data ! Registering by voice 1. Select the “PHONE BOOK” menu. 2. Select the “ADD ENTRY” menu. 3. Select the “BY VOICE” menu. 4. Press the talk switch 5. Say the phone number to be regis- tered. 6. Select the “CONFIRM” menu. 7. Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial or press the talk switch 8. Say the name (voice tag) registered. the “CONFIRM” menu. Then 9. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-51.
to be
! Registering by phone 1. Select the “PHONE BOOK” menu. 2. Select the “ADD ENTRY” menu. 3. Select the “BY PHONE” menu. 4. Select “TRANSFER” is displayed. 5. Transfer the data from the cell phone. For details about transferring the data, refer to the Owner’s Manual of the cell
the “CONFIRM” menu. Then
phone. 6. Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial or press the talk switch 7. Say the name (voice tag) registered. the “CONFIRM” menu. Then 8. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-51.
to be
Input the phone number to be regis-
! Registering by inputting manually 1. Select the “PHONE BOOK” menu. 2. Select the “ADD ENTRY” menu. 3. Select the “MANUAL INPUT” menu by operating the “TUNE/TRACK/CH” dial. 4. tered. 5. Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial or press the talk switch 6. Say the name (voice tag) registered. the “CONFIRM” menu. Then 7. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-51.
to be
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
NOTE While inputting the phone numbers, if “GO BACK” is chosen using the “TUNE/TRACK/CH” dial, the character that was input last is deleted. ! Registering from call history 1. Select the “PHONE BOOK” menu. 2. Select the “ADD ENTRY” menu. 3. Select the “CALL HISTORY” menu. 4. Select “OUTGOING” or “INCOMING” by operating the “TUNE/TRACK/CH” dial. 5. Select the phone number by operating the “TUNE/TRACK/CH” dial. 6. Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial or press the talk switch 7. Say the name (voice tag) registered. the “CONFIRM” menu. Then 8. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-51.
to be
! Registering from redial 1. Select the “REDIAL” menu. 2. Select the phone number by operating the “TUNE/TRACK/CH” dial. 3. Select the “STORE” menu.
4. Select the “CONFIRM” menu. 5. Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial or press the talk switch 6. Say the name (voice tag) registered. the “CONFIRM” menu. Then 7. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-51.
to be
! Registering from call back 1. Select the “CALL BACK” menu. 2. Select the phone number by operating the “TUNE/TRACK/CH” dial. 3. Select the “STORE” menu. 4. Select the “CONFIRM” menu. 5. Select the “RECORD NAME” menu by operating the “TUNE/TRACK/CH” dial or press the talk switch 6. Say the name (voice tag) registered. the “CONFIRM” menu. Then 7. Select “STORED” is displayed and the mode changes to the registering speed dial mode. Refer to “Registering speed dial” F5-51.
to be
Black plate (241,1)
Audio 5-51
! Registering speed dial 1. After registering phonebook data, se- lect the “SPEED DIAL” menu.
Preset buttons
2. Press the preset button in which you want to register the phone number.
NOTE If the number to be used is already registered in speed dial, “OVER- WRITE?” will be displayed. ! List names function The voice tags registered in the phone- book are spoken by using the list names function. To use the list names function, perform the following procedure. 1. Select the “PHONE BOOK” menu.
– CONTINUED –
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
Black plate (242,1)
5-52 Audio
2. Select the “LIST NAMES” menu. 3. Choose the registered data by press- ing the talk switch or by operating the “TUNE/TRACK/CH” dial. Then “SE- LECTED” is displayed. You can choose the following menus. . “DIAL” to make a phone call . “CHANGE NAME” to change the name (voice tag) . “SET SPD DIAL”/“SET SPEED DIAL” to set the speed dial . “DELETE ENTRY” to delete the name (voice tag) from the phonebook . “GO BACK” to go back to the menu mode NOTE . After “LIST NAMES” is selected, if the OFF hook switch is pushed, the selected number is called. . After “LIST NAMES” is selected, if no operation is performed, the mem- ories are displayed and voice tags are spoken. ! Changing voice tag 1. Select the “PHONE BOOK” menu. 2. Select the “CHANGE NAME” menu. 3. Select the phone number by operating the “TUNE/TRACK/CH” dial/by pressing the talk switch and saying the voice
tag. the “CONFIRM” menu. Then 4. Select the selected phone number/name is dis- played. 5. Press the talk switch 6. Say the new voice tag. 7. Select “CHANGED” is displayed.
the “CONFIRM” menu. Then
! Set speed dial 1. Select the “PHONE BOOK” menu. 2. Select “SET SPD DIAL” by operating the “TUNE/TRACK/CH” dial or select “SET SPEED DIAL” by using the voice command system. 3. Select the phone number by operating the “TUNE/TRACK/CH” dial/by pressing the talk switch and saying the voice tag. 4. Select the “CONFIRM” menu.
Preset buttons
5. Press the preset button in which you want to register the phone number.
NOTE If the number to be used is already registered in speed dial, “OVER- WRITE?” will be displayed. ! Deleting the phonebook data 1. Select the “PHONE BOOK” menu. 2. Select the “DELETE ENTRY” menu. 3. Select the phone number by operating the “TUNE/TRACK/CH” dial/by pressing the talk switch and saying the voice tag. the “CONFIRM” menu. Then 4. Select “DELETED” is displayed and the selected
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
phonebook data is deleted.
! Deleting the speed dial 1. Select the “PHONE BOOK” menu. 2. Select “DEL SPD DIAL” by operating the “TUNE/TRACK/CH” dial or select “DELETE SPEED DIAL” by using the voice command system.
the “TUNE/TRACK/CH” dial. 3. Select the “DELETE” menu. the “CONFIRM” menu. Then 4. Select “DELETED” is displayed and the selected redial data is deleted.
! Deleting the callback data 1. Select the “CALLBACK” menu. 2. Select the phone number by operating the “TUNE/TRACK/CH” dial. 3. Select the “DELETE” menu. the “CONFIRM” menu. Then 4. Select “DELETED” is displayed and the selected callback data is deleted.
Preset buttons
3. Press the preset button in which you want to delete the speed dial. the “CONFIRM” menu. Then 4. Select “DELETED” is displayed and the selected speed dial is deleted.
! Deleting the redial data 1. Select the “REDIAL” menu. 2. Select the phone number by operating
! Making a phone call ! Making a phone call by saying name 1. Press the talk switch 2. Say “DIAL BY NAME”. 3. Press the talk switch 4. Say the desired name (voice tag) to be called. 5. Select the “DIAL” menu or press the OFF hook switch
again.
! Making a phone call by saying
number
1. Press the talk switch 2. Say “DIAL BY NUMBER”.
Black plate (243,1)
Audio 5-53
again.
3. Press the talk switch 4. Say the desired phone number to be called. 5. Select the “DIAL” menu or press the OFF hook switch
! Making a phone call from speed dial It is possible to select a phone number from speed dial registered with the in- vehicle equipment to make a phone call.
Preset buttons
1. Press the preset button in which the desired number is registered. 2. Press the OFF hook switch
NOTE When a preset button for which num- bers are not registered is pressed, an – CONTINUED –
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-54 Audio
error message is indicated on the audio screen. ! Redial 1. Select the “REDIAL” menu. 2. Select the desired number by operat- ing the “TUNE/TRACK/CH” dial. 3. Select the “DIAL” menu or press the OFF hook switch
! Callback 1. Select the “CALL BACK” menu. 2. Select the desired number by operat- ing the “TUNE/TRACK/CH” dial. 3. Select the “DIAL” menu or press the OFF hook switch
! Making a phone call from list name It is possible to select a phone number from the list name registered with the in- vehicle equipment to make a phone call.
1. Select the “LIST NAMES” menu. 2. Select the desired number by operat- ing the “TUNE/TRACK/CH” dial. 3. Select the “DIAL” menu or press the OFF hook switch
! Top redial 1. Press the OFF hook switch load the outgoing call history. 2. Select the “DIAL” menu or press the OFF hook switch
and
! Taking a phone call and declining
an incoming call
To take a phone call: Press the OFF hook switch To put an incoming call on hold: Press the ON hook switch
briefly.
Black plate (244,1)
To decline an incoming call: Press the ON hook switch for more than 1.5
seconds. ! Volume controlYou can adjust the phone call volume, the voice volume and the voice guidance volume. Refer to “Volume control buttons” F5-44. ! Adjustable level of each volume
Volume
Phone call
Voice
Voice guidance
Range
0 to 14
0 to 14
0 to 6
Initial setting
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
! Menu list of the Hands-free system
Turn the “TUNE/TRACK/CH” dial to select a menu, and then press the dial to enter the selected menu.
Black plate (245,1)
Audio 5-55
– CONTINUED –
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
Black plate (246,1)
5-56 Audio
First menu PHONE BOOK*
REDIAL
CALLBACK
Second menu
Third menu
Details
ADD ENTRY
LIST NAMES
CHANGE NAME
SET SPD DIAL
DELETE ENTRY
DEL SPD DIAL
GO BACK
DIAL
STORE
DELETE
GO BACK
DIAL
STORE
DELETE
GO BACK
BY VOICE
BY PHONE
MANUAL INPUT
CALL HISTORY
GO BACK
Adding a new number by voice
Adding a new number by cell phone
Adding a new number by inputting manually
Adding a new number from the call history
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Showing the list of the names registered in the phonebook
Changing a name registered in the phonebook
Registering a speed dial
Deleting phonebook data
Deleting a registered speed dial
Redialing
Adding a new number stored in the outgoing call history memory
Deleting a number stored in the outgoing call history memory
Dialing a number stored in the incoming call history memory
Adding a new number stored in the incoming call history memory
Deleting a number stored in the incoming call history memory
*: If a cell phone is not registered, the menu described in the chart is not indicated.
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
Black plate (247,1)
Audio 5-57
First menu
Second menu
Third menu
Details
SETUP
SECURITY
SET PIN
PHBK LOCK*
Setting a PIN code
Locking the phonebook
PHBK UNLOCK*
Unlocking the phonebook
PHONE SETUP
GO BACK
PAIR PHONE
SELECT PHONE
CHANGE NAME
LIST PHONES
SET PASSKEY
DELETE
GO BACK
Registering a new cell phone
Selecting a cell phone to be used
Changing the registered name of the cell phone
Showing the list of the registered cell phones
Changing the pass key
Deleting the registered cell phone
SYSTEM SETUP
GUIDANCE VOL
Setting the volume of the voice guidance
INITIALIZE
Initialization
SEL LANGUAGE
Selecting the language (using the Hands-free system)
GO BACK
GO BACK
—
*: If a PIN code is not registered, the menu described in the chart is not available.
– CONTINUED –
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-58 Audio
! Voice command system
1) OFF hook switch 2) ON hook switch 3)
Talk switch
To turn on the voice command system, press the talk switch briefly. To turn off the voice command system, wait for 5
seconds without using the voice command system.The commands available for the voice command system are listed in the follow- ing chart.
Command
English
Français
10
11
12
13
14
15
16
17
18
19
0 (zero, oh)
1 (one)
2 (two)
3 (three)
4 (four)
5 (five)
6 (six)
7 (seven)
8 (eight)
9 (nine)
* (star)
# (pound)
+ (plus)
callback
redial
dial by number
0 (zéro)
1 (un)
2 (deux)
3 (trois)
4 (quatre)
5 (cinq)
6 (six)
7 (sept)
8 (huit)
9 (neuf)
* (étoile)
# (carré, dièse)
+ (plus)
rappel
recomposer
composer par nu- méro
dial by name
composer par nom
phonebook
setup
registre
réglages
Black plate (248,1)
phone book add entry
ajouter l’entrée dans le registre
phone book change name
phone book delete entry
phone book list names
phone book set speed dial
phone book delete speed dial
modifier le nom dans le registre supprimer l’entrée du registre
lister les noms du registre
configurer compo- sition abrégée pour le registre
supprimer compo- sition abrégée pour le registre
phone book unlock déverrouiller le re-
gistre
31 mute
cancel
help
repeat
go back
dial
previous
delete
store
confirm
annuler
aide
répéter
retourner
sourdine
composer
précédent
supprimer
enregistrer
confirmer
phone setup
réglages du télé- phone
20
21
22
23
24
25
26
27
28
29
30
32
33
34
35
36
37
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
security
sécurité
pair phone
jumeler le télé- phone
change name
modifier le nom
38
39
40
41
select phone
42
list phones
43
44
45
46
47
48
49
50
51
52
53
54
55
set pass key
add entry
delete entry
delete speed dial
by voice
by phone
call history
set speed dial
incoming
outgoing
list names
set PIN
phone book lock
sélectionner le tél- éphone
lister les télé- phones
configurer le passe-partout ajouter l’entrée supprimer l’entrée supprimer compo- sition abrégée
vocalement
par téléphone historique d’appels configurer compo- sition abrégée
entrant
sortant
lister les noms
configurer NIP verrouiller le regis- tre
& Bluetooth® setting ! Security setting ! Setting PIN code The PIN code is a 4-digit number and is used when locking the phonebook. 1. Select the “SETUP” menu. 2. Select the “SECURITY” menu. 3. Select “CURRENT PIN?” is displayed. 4. Input the current PIN code by operat- ing the “TUNE/TRACK/CH” dial or saying the number. 5. Select the “CONFIRM” menu. 6. Input the new PIN code by operating the “TUNE/TRACK/CH” dial or saying the number. 7. Select the “CONFIRM” menu.
the “SET PIN” menu. Then
! Locking the phonebook 1. Select the “SETUP” menu. 2. Select the “SECURITY” menu. 3. Select “PHBK LOCK” by operating the “TUNE/TRACK/CH” dial or say “PHONE- BOOK LOCK”. Then “CURRENT PIN?” is displayed. 4. Input the PIN code by operating the “TUNE/TRACK/CH” dial or saying the number. 5. Select
the “CONFIRM” menu.
the
If
Black plate (249,1)
Audio 5-59
inputted PIN code is correct, “LOCKED” is displayed and the phonebook is locked.
NOTE While the phonebook is locked, if the operation restricted menu is selected, “PHBK LOCK” is displayed. ! Unlocking the phonebook 1. Select the “SETUP” menu. 2. Select the “SECURITY” menu. 3. Select the “PHBK UNLOCK” menu by operating the “TUNE/TRACK/CH” dial or say “PHONEBOOK UNLOCK”. Then “CURRENT PIN?” is displayed. NOTE If the phonebook is not locked, “UN- LOCK” is displayed and the mode changes to the security mode. 4. Input the PIN code by operating the “TUNE/TRACK/CH” dial or saying the number. the “CONFIRM” menu. If the 5. Select “UN- inputted PIN code is correct, LOCKED” is displayed and the phone- book is unlocked.
– CONTINUED –
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-60 Audio
! Phone setup ! Setting pair phone Refer to “Preparation for using the Hands- free system” F5-50. ! Selecting phone To select the registered cell phone for connecting to the in-vehicle equipment, perform the following procedure. 1. Select the “SETUP” menu. 2. Select the “PHONE SETUP” menu. 3. Select the “SELECT PHONE” menu. If no cell phones are registered, “EMPTY” is displayed and the mode changes to the “PHONE SETUP” mode. 4. Select the cell phone by operating the “TUNE/TRACK/CH” dial or saying the voice tag. “SE- 5. Select LECTED” is displayed, the selected cell phone is connected to the in-vehicle equipment and the mode changes to the “PHONE SETUP” mode.
the “CONFIRM” menu.
! Changing the voice tag of the cell
phone
1. Select the “SETUP” menu. 2. Select the “PHONE SETUP” menu. 3. Select the “CHANGE NAME” menu. If no cell phones are registered, “EMPTY” is
displayed and the mode changes to the “PHONE SETUP” mode. 4. Select the cell phone by operating the “TUNE/TRACK/CH” dial or saying the voice tag. 5. Select the “RECORD NAME” menu. 6. Register the voice tag. For details, refer to “Preparation for using the Hands- free system” F5-50.
! List phones function The cell phone voice tags saved in the cell phone list are spoken by using the list phones function. 1. Select the “SETUP” menu. 2. Select the “PHONE SETUP” menu. 3. Select the “LIST PHONES” menu. If no cell phones are registered, “EMPTY” is displayed and the mode changes to the “PHONE SETUP” mode. 4. Registered cell phones are displayed on the saved side. While displayed, if the “TUNE/TRACK/CH” dial the next registered cell phone is displayed. Press the ON hook button to close the Hands-free menu. 5. Select a cell phone by operating the “TUNE/TRACK/CH” dial or pressing the talk switch is displayed. 6. Select the following menus.
. Then “SELECTED”
is turned,
Black plate (250,1)
the
to connect
. “SELECT PHONE” selected cell phone . “CHANGE NAME” to change the voice tag . “DELETE” to delete the selected cell phone from the list . “GO BACK” to go back to the “PHONE SETUP” mode
the “SET PASSKEY” menu. the currently set passkey is dis-
! Setting passkey 1. Select the “SETUP” menu. 2. Select the “PHONE SETUP” menu. 3. Select After played, a new passkey can be entered. 4. Input the new passkey by operating the “TUNE/TRACK/CH” dial or saying the passkey. 5. Select the “CONFIRM” menu. The new passkey is displayed, the passkey is changed and the mode changes to the “PHONE SETUP” mode.
! Deleting registered cell phone from
the list
1. Select the “SETUP” menu. 2. Select the “PHONE SETUP” menu. 3. Select the “DELETE” menu. 4. Select a cell phone to be deleted by operating the “TUNE/TRACK/CH” dial or
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
Black plate (251,1)
Audio 5-61
the language, perform the
! Selecting language To select following procedure. 1. Select the “SETUP” menu. 2. Select the “SYSTEM SETUP” menu. 3. Select “SEL LANGUAGE” by operat- ing the “TUNE/TRACK/CH” dial. 4. Select the desired language by oper- ating the “TUNE/TRACK/CH” dial.
the “CONFIRM” menu.
saying a voice tag. “DE- 5. Select LETED” is displayed, the data is deleted and the mode changes to the “PHONE SETUP” mode.
! System setup ! Setting guidance volume To set the guidance volume, perform the following procedure. 1. Select the “SETUP” menu. 2. Select the “SYSTEM SETUP” menu. 3. Select “GUIDANCE VOL” by operating the “TUNE/TRACK/CH” dial. 4. Set the guidance volume by operating the “TUNE/TRACK/CH” dial.
! Initializing the registered data To initialize the registered data, perform the following procedure. 1. Select the “SETUP” menu. 2. Select the “SYSTEM SETUP” menu. 3. Select “INITIALIZE” by operating the “TUNE/TRACK/CH” dial. 4. Select “CONFIRM” by operating the “TUNE/TRACK/CH” dial. First “PLEASE WAIT”, then “INITIALIZED” is displayed. The registered data is initialized and the mode changes to the last mode.
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
Black plate (2,1)
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Left Page
Model "ALL_MODEL_MEMO" EDITED: 2007/ 6/ 22
Black plate (11,1)
Interior equipment
Interior lights ....................................................... Dome light .......................................................... Cargo area light (5-door models) ......................... Map lights ........................................................... Sun visors ........................................................... Vanity mirror ....................................................... Storage compartment ......................................... Glove box ........................................................... Center console.................................................... Coin tray (if equipped)......................................... Cup holders ......................................................... Front passenger’s cup holder .............................. Rear passenger’s cup holder (if equipped) ........... Bottle holders ...................................................... Accessory power outlets.................................... Use with a cigarette lighter (if equipped) ..............
6-2
6-2
6-2
6-3
6-4
6-4
6-4
6-5
6-5
6-5
6-5
6-5
6-7
6-7
6-8
6-9Ashtray (if equipped)......................................... Portable ashtray ................................................ Rear ashtray (STI – if equipped) ......................... Floor mat (if equipped)...................................... Shopping bag hook (5-door)............................. Cargo area cover (5-door – if equipped).......... Using the cover ................................................. To remove the cover .......................................... To install the cover housing ...............................
Cargo tie-down hooks (5-door – if
equipped) ........................................................
Under-floor storage compartment
(if equipped) ....................................................
6-10
6-10
6-10
6-11
6-11
6-12
6-12
6-12
6-136-13
6-14
北米Model "A1110BE-C" EDITED: 2010/ 11/ 17
Black plate (254,1)
6-2 Interior equipment
Interior lights
When leaving your vehicle, make sure the lights are turned off to avoid battery discharge.
& Dome light
1) ON 2) DOOR 3) OFF
The dome light switch has the following three positions.
ON: The light remains on continuously. OFF: The light remains off. DOOR: The dome light illuminates auto- matically in the following cases. . Any of the doors or the rear gate (5- door) is opened.
. The doors or the rear gate (5-door) are unlocked using the remote keyless entry transmitter. . The ignition switch is turned from the “Acc” position to the “LOCK” position.
. Models without genuine SUBARU navigation system: The setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.
The automatically illuminated dome light remains on for several seconds and then gradually turns off after all doors and the rear gate (5-door) are closed.
While the light is illuminated, if any of the following operations are performed, the dome light turns off immediately. . The ignition switch is turned from the “LOCK” position to “Acc” or “ON” position. . All doors and the rear gate (5-door) are locked using the remote keyless entry transmitter.
The setting of the period for which the light remains on (OFF delay timer) can be changed as follows. . Models with genuine SUBARU navi- gation system: The setting can be changed using the navigation monitor. For details, please refer to the Owner’s Manual supplement for the navigation system. Also, the setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.
& Cargo area light (5-door
models)
ON position: The light illuminates when the rear gate is opened. The light remains illuminated for several seconds and gra- dually turns off after the rear gate is closed. OFF position: The light remains off.
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
& Map lights
Type A
Type B
To turn on the map light, push the switch. To turn it off, push the switch again.
When leaving the vehicle, make sure the lights are turned off to avoid battery discharge. NOTE For the type A map lights, although the light switches are in the ON position, the lights are automatically turned off after approximately 30 seconds of illumination to prevent the vehicle battery from discharging. For details, refer to “Battery drainage prevention function” F2-5. ! Automatic illumination (models
with moonroof)
The map lights illuminate automatically in the following cases. . Any of the doors other than the rear gate is opened. (The map lights do not illuminate when only the rear gate is opened.) . The doors are unlocked using the remote keyless entry transmitter. . The ignition switch is turned from the “Acc” position to the “LOCK” position.
The automatically illuminated map lights remain on for several seconds and then gradually turn off after all doors are closed.
While the lights are on,
if any of
the
Black plate (255,1)
Interior equipment 6-3
the
following operations are performed, map lights turn off immediately. . The ignition switch is turned from the “LOCK” position to the “Acc” or “ON” position. . All doors and the rear gate (5-door) are locked using the remote keyless entry transmitter.
the period for which the The setting of lights remain on (OFF delay timer) can be changed as follows. . Models with genuine SUBARU navi- gation system: The setting can be changed using the navigation monitor. For details, please refer to the Owner’s Manual supplement for the navigation system. Also, the setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details. . Models without genuine SUBARU navigation system: The setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
Black plate (256,1)
6-4 Interior equipment
Sun visors
& Vanity mirror
Storage compartment
CAUTION
Keep the vanity mirror cover closed while the car is being driven to avoid being temporarily blinded by the glare of bright light.
CAUTION
. Always keep the storage com- partment closed while driving to reduce the risk of injury in the event of a sudden stop or an accident.
. Do not store spray cans, contain- ers with flammable or corrosive liquids or any other dangerous items in the storage compart- ment.
To block out glare, swing down the visors. To use the sun visor at a side window, swing it down and move it sideways.
To use the vanity mirror, swing down the sun visor and open the vanity mirror cover.
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
& Glove box
& Center console
Cup holders
Black plate (257,1)
Interior equipment 6-5
CAUTION
Take care to avoid spills. Beverages, if hot, might burn you or your passengers. Spilled beverages may also damage upholstery, carpets or audio equipment.
& Front passenger’s cup holder
Lock
1) 2) Unlock
To open the glove box, pull the handle. To close it, push the lid firmly upward.
To lock the glove box, insert the key and turn it clockwise. To unlock the glove box, insert the key and turn it counterclockwise.
To open the lid, pull up the lock release.
& Coin tray (if equipped)
CAUTION
Do not pick up a cup from the cup holder or put a cup in the holder while you are driving, as this may distract you and lead to an accident.
A coin tray is built in the center console.
– CONTINUED –
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
Black plate (258,1)
6-6 Interior equipment
! Except STI
console near the parking brake lever.
cups of different sizes to be held.
A dual cup holder is built in the center console, beside the parking brake lever. ! STI
To access the cup holder, pull toward the rear.
the lid
NOTE With the divider taken out, holder can be used as a storage box.
the cup
The dual cup holder is built into the center
The divider in the cup holder can be pulled out and inserted in a different position (further toward the front or rear) to enable
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
& Rear passenger’s cup holder
(if equipped)
Bottle holders
trim can be used to hold beverage bottles and other items.
Black plate (259,1)
Interior equipment 6-7
CAUTION
When not in use, always keep the cup holder stored while driving to reduce the risk of injury in the event of a sudden stop or an accident.
CAUTION
. Do not pick up a bottle from the bottle holder or put a bottle in the holder while you are driving, as this may distract you and lead to an accident.
. When placing a beverage in a door pocket, make sure it is capped. Otherwise, the beverage could spill when opening/closing the door or while driving and, if the beverage is hot, it could scald you.
A dual cup holder is located at the back of the center console. To use the cup holder, open the lid by pulling its upper edge.
The door pocket equipped on each door
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
6-8 Interior equipment
Accessory power outlets
Power outlet below the climate control dials
Power outlet in the center console (except STI)
Power outlet in the center console (STI)
Accessory power outlets are provided below the climate control dials and in the center console. Electrical power (12V DC) from the battery is available at any of the outlets when the ignition switch is in either the “Acc” or “ON” position. You can use an in-vehicle electrical appliance by connecting it to an outlet. The maximum power rating of an appli- ance that can be connected is 120W. Do not use an appliance which exceeds the indicated wattage for each outlet. When using appliances connected to two outlets simultaneously, the total power consumed by them must not exceed 120W.
Black plate (260,1)
CAUTION
. Do not attempt to use a cigarette lighter in the accessory power outlets.
. Do not place any foreign objects, especially metal ones such as coins or aluminum foil, into the accessory power outlet. That could cause a short circuit. Al- ways put the cap on the acces- sory power outlet when it is not in use.
. Use only electrical appliances which are designed for 12V DC. The maximum power rating of an appliance that can be connected is 120W. Do not use an appliance which exceeds the indicated wat- tage for each outlet. When using appliances con- nected to two outlets simulta- neously, the total power con- sumed by them must not exceed 120W. Overloading the accessory power outlet can cause a short circuit. Do not use double adap- ters or more than one electrical appliance.
. If the plug on your electric appli- ance is either too loose or too
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
tight for the accessory power outlet, this can result in a poor contact or cause the plug to get stuck. Only use plugs that fit properly.
. Use of an electric appliance in the accessory power outlet for a long period of time while the engine is not running can cause battery discharge.
. Before driving your vehicle, make sure that the plug and the cord on your electrical appliance will not interfere with your shifting gears and operating the accel- erator and brake pedals. If they do, do not use the electrical appliance while driving.
& Use with a cigarette lighter (if
equipped)
To use the accessory power outlet below the climate control as a cigarette lighter socket, purchase the cigarette lighter plug, which is an optional accessory. A cigarette lighter plug is available from your SUBARU dealer. The cigarette lighter operates only when the ignition switch is in the “ON” or “Acc” position. To use the cigarette lighter, push in the knob and wait a few moments. It will automatically spring up when ready for use.
WARNING
To avoid being burned, never grasp the lighter by the end with the heating element. Doing so could result in injury and could also damage the heating element.
CAUTION
. Do not hold the lighter pushed in,
because it will overheat.
. The electrical power socket lo- cated in the center console is originally designed to use a gen-
Black plate (261,1)
Interior equipment 6-9
uine SUBARU cigarette lighter plug. Do not use a non-genuine cigarette lighter plug in the sock- et. Doing so may cause a short- circuit and overheating, resulting in a fire.
