Download PDF Manual

'98


owner's manual


g.# A


">A*


II


1 V


I r:


B


The 1998 Pontiac Bonneville Owner’s Manual


1-1


2-1


3-1


4-1


5- 1


6-1


7- 1


8- 1


9-1


Seats and Restraint Systems This section tells you how to use your seats and safety belts properly. It also explains the “SRS” system. Features and Controls This section explains how to start and operate your vehicle. Comfort Controls and Audio Systems This section tells you how to adjust the ventilation and comfort controls and how to operate your audio system. Your Driving and the Road Here you’ll find helpful information and tips about the road and how to drive under different conditions. Problems on the Road This section tells what to do if you have a problem while driving, such as a flat tire or overheated engine, etc. Service and Appearance Care Here the manual tells you how to keep your vehicle running properly and looking good. Maintenance Schedule This section tells you when to perform vehicle maintenance and what fluids and lubricants to use. Customer Assistance Information This section tells you how to contact Pontiac for assistance and how It also gives you information on “Reporting Safety Defects” on page 8-10. Index Here’s an alphabetical listing of almost every subject in this manual. You can use it to quickly find something you want to read.


to get service and owner publications.


GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem and the name BONNEVILLE are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes in the product after that time without further notice. For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited” for Pontiac Division whenever it appears in this manual. Please keep this manual in your vehicle, so it will be there if you ever need it when you’re on the road. If you sell the vehicle, please leave this manual in it so the new owner can use it.


We support voluntary technician certification.


WE SUPPORT


VOLUNTARY TECHNICIAN CERTIFICATION THROUGH


National InstiMe for


AUTOMOTIVE


S E R V I C E


EXCELLENCE


For Canadian 3wners Who Prefer a French Language Manual: Aux propri6taires canadiens: Vous pouvez vous procurer un exemplaire de ce guide en fraqais chez votre concessionaire ou au:


DGN Marketing Services Ltd. 1577 Meyerside Dr. Mississauga, Ontario L5T 1B9


Litho in U.S.A. Part No, 10296287 B First Edition ii


@Copyright General Motors Corporation 1997


All Rights Reserved


How to Use this Manual Many people read their owner’s manual from beginning to end when they fist receive their new vehicle. If you do this, it will help you learn about the features and controls for your vehicle. In this manual, you’ll find that pictures and words work together to explain things quickly. Index A good place to look for what you need is the Index in back of the manual. It’s an alphabetical list of what’s in the manual, and the page number where you’ll find it. Safety Warnings and Symbols You will find a number of safety cautions in this book. We use a box and the word CAUTION to tell you about things that could hurt you if you were to ignore the warning.


A CAUTION:


These mean there is something that could hurt you or other people.


In the caution area, we tell you what the hazard is. Then we tell you what to do to help avoid or reduce the hazard. Please read these cautions. If you don’t, you or others could be hurt.


You will also find a circle with a slash through it in this book. This safety symbol means “Don’t,’’ “Don’t do this” or “Don’t let this happen.’’


iii


Vehicle Damage Warnings Also, in this book you will find these notices:


I NOTICE:


These mean there is something that could damage your vehicle.


In the notice area, we tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly. But the notice will tell you what to do to help avoid the damage. When you read other manuals, you might see CAUTION and NOTICE warnings in different colors or in different words. You’ll also see warning labels on your vehicle. They use the same words, CAUTION or NOTICE.


iv


Vehicle Symbols These are some of the symbols you may find on your vehicle.


For example, these symbols are used on an original battery:


CAUTION POSSIBLE INJURY


PROTECT EYES BY SHIELDING


These symbols are important for you and your passengers whenever your vehicle is driven:


DOOR LOCK UNLOCK


These symbols have to do with your lamps:


These symbols are on some of your controls:


e3


TURN SIGNALS


WINDSHIELD WIPER


WINDSHIELD DEFROSTER


- ~ ~ - .


CAUSTIC BAllERY ACID COULD CAUSE BURNS


AVOID SPARKS OR FLAMES


SPARK OR FLAME COULD EXPLODE BAllERY


,\I/,


POWER WINDOW


oJ4


AIR BAG p\


DEFOGGER


FOG LAMPS # 0


VENTILATING


FAN (


rc?:


These symbols are used on warning and indicator lights:


Here are some other symbols you may see:


FUSE


I-1 (a)


LIGHTER n HORN )b. SPEAKER b e,


COOLANT TEMP


BAllERY CHARGING SYSTEM


BRAKE


ENGINE OIL PRESSURE


FUEL


& NOTES


vi


Section 1 Seats and Restraint Systems


Here you’ll find information about the seats in your Pontiac and how to use your safety learn about some things you should not do with air bags and safety belts.


belts properly. You can also


1-2 1-5 1-9


1-10 1-10 1 - 17 1 - 18 1 - 18 1-24


Seats and Seat Controls Safety Belts: They’re for Everyone Here Are Questions Many People Ask About Safety Belts -- and the Answers How to Wear Safety Belts Properly Driver Position Safety Belt Use During Pregnancy Right Front Passenger Position Supplemental Restraint System (SRS) Center Passenger Position


1-26 1-29


1-31 1-34 1-46 1-49 1-49 1-49


Rear Seat Passengers Rear Safety Belt Comfort Guides for Children and Small Adults Children Child Restraints Larger Children Safety Belt Extender Checking Your Restraint Systems Replacing Restraint System Parts After a Crash


Seats and Seat Controls This section tells you about the seats -- how to adjust them -- and also about reclining seatbacks and head restraints. Manual Front Seat


A CAUTION:


You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you don’t want to. Adjust the driver’s seat only when the vehicle is not moving.


Pull up on the control bar under the front of the seat to unlock it. Slide the seat to where you want it. Then release the bar and try to move the seat with your body, to make sure the seat is locked into place.


1-2


Power Seat (Option)


To adjust the power seats on some models:


Front Control (A): Raise the front of the seat by holding the switch up. Lower the front of the seat by holding the switch down. Center Control (B): Move the seat forward by pressing the control forward, or backward by pressing the control backward. Move the seat higher by holding the control up. Lower the seat by holding the control down. Rear Control (C): Raise the rear of the seat by holding the switch up. Lower the rear of the seat by holding the switch down.


Power Lumbar Controls (Option) d? Reshapes the lower back area of the seat. d Reshapes the middle back area of the seat.


Reshapes the upper back area of the seat.


Adjustable Support Seat (Option)


& Adjusts the position of the seatback side bolsters. 'd Tilts the rear of the seat up or down.


A&


Tilts the front of the seat up or down.


Reclining Front Seatbacks


On some models, you'll find the controls on the center console. Slide the selector switch to L or R to choose the front seat you want to adjust.


d!. Adjusts the seat forward or back. d Adjusts the seat up or down. &' Adjusts the seatback to an upright or reclined position.


To adjust the seatback, lift the lever on the outer side of the seat and move the seatback to where you want it. Release the lever to lock the seatback. PuII up on the lever and the seat will go to an upright position.


1-3


its job because it


if you buckle job when


Sitting in a reclined position when your vehicle is in motion can be dangerous. Even up, your safety belts can’t do their you’re reclined like this. The shoulder belt can’t do won’t be against your body. Instead, it will be in front of you. In a crash you could go into it, receiving neck or other injuries. The lap belt can’t do its job either. In a crash the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries. For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear your safety belt properly.


But don’t have a seatback reclined if your vehicle is moving.


1-4


Head Restraints Slide the head restraint up or down so that the top of the restraint is closest to the top of your ears. This position reduces the chance of a neck injury in a crash. On some models, the head restraints tilt forward and rearward also. Safety Belts: They’re for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. And it explains the Supplemental Restraint System (SRS), or air bag system.


A CAUTION:


Don’t let anyone ride where he or she can’t wear a safety belt properly. If you are in a crash and you’re not wearing a safety belt, your can be much worse. You can hit things inside the vehicle or be ejected from it. You can be seriously injured or killed. In the same crash, you might not be if you are buckled up. Always fasten your safety belt, and check that your passengers’ belts


are fastened properly too. -


injuries


A CAUTION:


It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly.


1-5


1


& FASTEN I buckle up. (See “Safety


Your vehicle has a light that comes on as a reminder to


BELTS


Belt Reminder Light” in the Index.)


L W


In most states and Canadian provinces, the law says to wear safety belts. Here’s why: They work. You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up a person wouldn’t survive. But most crashes are in between. In many of them, people who buckle up can survive and sometimes walk away. Without belts they could have been badly hurt or killed. After more than 30 years of safety belts in vehicles, the facts are clear. In most crashes buckling up does matter ... a lot!


1-6


Why Safety Belts Work When you ride in or on anything, you go as fast as it goes.


Take the simplest vehicle. Suppose it’s on wheels.


just a seat


Put someone on it.


Get it up to speed. Then stop the vehicle. The rider doesn’t stop.


1-7


The person keeps going until stopped by something. In a real vehicle, it could be the windshield ...


or the instrument panel ...


1-8


Here Are Questions Many People Ask About Safety Belts -- and the Answers Q; Won’t I be trapped in the vehicle after an accident if I’m wearing a safety belt?


A: You could be -- whether you’re wearing a safety belt or not. But you can unbuckle a safety belt, even if you’re upside down. And your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted. If my vehicle has air bags, why should I have to wear safety belts?


A: Air bags are in many vehicles today and will be in


most of them in the future. But they are supplemental systems only; so they work with safety belts -- not instead of them. Every air bag system ever offered for sale has required the use of air safety belts. Even if you’re in a vehicle that has bags, you still have to buckle up protection. That’s true not only in frontal collisions, but especially in side and other collisions.


to get the most


1-9


or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense.


home, why should I wear safety belts?


Q: If I’m a good driver, and I never drive far from A: You may be an excellent driver, but if you’re in an accident -- even one that isn’t your fault -- you and your passengers can be hurt. Being a good driver doesn’t protect you from things beyond your control, such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h). Safety belts are for everyone.


How to Wear Safety Belts Properly Adults This part is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your vehicle, see the part of this m a n d called “Children.” Follow those rules for everyone’s protection. First, you’ll want to know which restraint systems your vehicle has. We’ll start with the driver position. Driver Position This part describes the driver’s restraint system. Lap-Shoulder Belt The driver has a lap-shoulder belt. Here’s how to wear it properly. 1. Close and lock the door. 2. Adjust the seat (to see how, see “Seats” in the Index)


so you can sit up straight.


1-10


- .


.”. ..



-.


3. Pick up the latch plate and pull the belt across you.


Don’t let it get twisted.


4. Push the latch plate into the buckle until it clicks.


it is secure. If


Pull up on the latch plate to make sure the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.


The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The safety belt locks if there’s a sudden stop or crash.


1-11


Shoulder Belt Height Adjuster Before you begin to drive, move the shoulder belt adjuster to the height that is right for you.


To move it down, squeeze the release handle and move the height adjuster to the desired position. You can move the adjuster up just by pushing up on the bottom of the release handle. After you move the adjuster to where you want it, try to move it down without squeezing the release handle to make sure it has locked into position. Adjust the height so that the shoulder portion of the belt is centered on your shoulder. The belt should be away from your face and neck, but not falling off your shoulder.


1-12


Q: What’s wrong with this?


A CAUTION:


You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body.


A: The shoulder belt is too loose. It won’t give nearly


as much protection this way.


1-13


Q: What’s wrong with this?


A CAUTION:


You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you.


A: The belt is buckled in the wrong place.


What’s wrong with this?


You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which aren’t as strong as shoulder bones. You could also severely injure internal organs like your liver or spleen.


A: The shoulder belt is worn under the ann. It should


be worn over the shoulder at all times.


1-15


Q: What’s wrong with this?


A CAUTION:


You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the If a belt is twisted, belt to spread impact forces. make it straight so it can work properly, or ask your dealer to fix it.


A: The belt is twisted across the body.


1-16


Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don’t wear safety belts.


To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.


A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.


1-17


a crash. For


The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in pregnant women, as for anyone, the key to making safety belts effective is wearing them properly. Right Front Passenger Position To learn how to wear the right front passenger’s safety belt properly, see “Driver Position’’ earlier in this section. as The right fiont passenger’s safety belt works the same way -- except for one thing. If you ever pull the driver’s safety belt all the way, you will engage the the lap portion of the belt out child restraint locking feature. If this happens, just let the belt go back all the way and start again. If your vehicle has a center passenger position, be sure to use the correct buckle when buckling your lap-shoulder belt. If you find that the latch plate will not go fully into the buckle, see if you are using the buckle for the center passenger position. Supplemental Restraint System (SRS) This part explains the Supplemental Restraint System (SRS) or air bag system. Your vehicle has “Next Generation” reduced-force frontal air bags -- one air bag for the driver and another air bag for the right front passenger.


Reduced-force frontal air bags are designed to help reduce the risk of injury from the force of an inflating frontal air bag. But even these air bags must inflate very quickly if they are to do their job and comply with federal regulations. Here are the most important things to know about the air bag system:


p u can be severely injured or killed in a crash if you aren’t wearing your safety belt -- even if you have air bags. Wearing your safety belt during a crash helps reduce your chance of hitting things inside the vehicle or being ejected from it. Air bags All air bags -- even redud-force air bags -- are are “supplemental restraints” to the safety belts. designed to work with safety belts, but don’t replace them. Air bags ace designed to work only in moderate to severe crashes where the front of your vehicle hits something. They aren’t designed to Mate at all in rollover, rear, side or low-speed


CAUTION: (Continued)


should wear a safety belt properly -- whether or not there’s an air bag for that person. &A CAUTION:


frontal crashes. And, for unrestrained occupants, reduced-force air bags may provide less protection in frontal crashes than more forceful air bags have provided in the past. Everyone in your vehicle


Air bags inflate with great force, faster than the blink of an eye. If you’re too close to an inflating air bag, it could seriously injure you. This is true even with reduced-force frontal air bags. Safety belts help keep you in position before and during a crash. Always wear your safety belt, even with reduced-force air bags. The driver should sit as far back as possible while still maintaining control of the vehicle.


’ A CAUTION:


Children who are up against, or very close to, an air bag when it inflates can be seriously injured or killed. This is true even though your vehicle has reduced-force frontal air bags. Air bags plus lap-shoulder belts offer the best protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide. Always secure children properly in your vehicle. To read how, see the part of this manual called “Children” and see the caution labels on the sunvisors and the right front passenger’s safety belt.


1-19


BAG 4 AIR 0.


There is an air bag readiness light on the instrument panel, which shows AIR BAG.


How the Air Bag System Works


The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical problem. See “Air Bag Readiness Light” in the Index for more information.


Where are the air bags? The driver’s air bag is in the middle of the steering wheel.


1-20


‘ A CAUTION:


If something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into that person. The path of an inflating air bag must be kept clear. Don’t put anything between an occupant and an air bag, and don’t attach or put anything on the steering wheel hub or on or near any other air bag covering.


The right front passenger’s air bag is in the instrument panel on the passenger’s side.


1-21


When should an air bag inflate? An air bag is designed to inflate in a moderate to severe frontal or near-frontal crash. The air bag will inflate only if the impact speed is above the system’s designed “threshold level.” If your vehicle goes straight into a is wall that doesn’t move or deform, the threshold level about 9 to 15 mph (14 to 24 km/h). The threshold level can vary, however, with specific vehicle design, so that it can be somewhat above or below this range. If your vehicle strikes something that will move or deform, such as a parked car, the threshold level will be higher. The air bag is not designed to inflate in rollovers, side impacts or rear impacts, because inflation would not help the occupant. In any particular crash, no one can say whether an air bag should have inflated simply because of the damage to a vehicle or because of what the repair costs were. Inflation is determined by the angle of the impact and how quickly the vehicle slows down in frontal or near-frontal impacts. What makes an air bag inflate? In an impact of suEcient severity, the air bag sensing system detects that the vehicle is in a crash. The sensing system triggers a release of gas from the inflator, which inflates the air bag. The inflator, air bag and related hardware are all part of the air bag modules inside the 1-22


steering wheel and in the instrument panel in front of the right front passenger. How does an air bag restrain? In moderate to severe frontal or near-frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. Air bags supplement the protection provided by safety belts. Air bags distribute the force of the impact more evenly over the occupant’s upper body, stopping the occupant more gradually. But air bags would not help you in many types of collisions, including rollovers, rear impacts and side impacts, primarily because an occupant’s motion is not toward those air bags. Air bags should never be regarded as anything more than a supplement to safety belts, and then only in moderate to severe frontal or near-frontal collisions. What will you see after an air bag inflates? After an air bag inflates, it quickly deflates, so quickly that some people may not even realize the air bag inflated. Some components of the air bag module -- the steering wheel hub for the driver’s air bag, or the instrument panel for the right front passenger’s bag -- will be hot for a short time. The parts of the bag that come into contact with you may be warm, but not too hot to touch. There will be some smoke and dust coming from vents in the deflated air bags.


Air bag inflation doesn’t prevent the driver from seeing or from being able to steer people from leaving the vehicle.


the vehicle, nor does it stop


A new system will include air bag modules and possibly other parts. The service manual for your vehicle covers the need to replace other parts.


A CAUTION:


When an air bag inflates, there is dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so. If you have breathing problems but can’t get out of the vehicle after an air bag inflates, then get fresh air by opening a window or door.


In many crashes severe enough to inflate an air bag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger air bag.


Air bags are designed to inflate only once. After they inflate, you’ll need some new parts for your air bag system. If you don’t get them, the air bag system won’t be there to help protect you in another crash.


0 Your vehicle is equipped with a crash sensing and


diagnostic module, which records information about the air bag system. The module records information are about the readiness of the system, when the sensors activated and driver’s safety belt usage at deployment. Let only qualified technicians work on your air bag system. Improper service can mean that your air bag system won’t work properly. See your dealer for service.


NOTICE:


If you damage the covering for the driver’s or the right front passenger’s air bag, the bag may not work properly. You may have to replace the air bag module in the steering wheel or both the air bag module and the instrument panel for the right front passenger’s air bag. Do not open or break the air bag coverings.


1-23


I


For up to 10 minutes after the ignition key is turned off and the battery is disconnected, an air bag can still inflate during improper service. You can be injured if you are close to an air bag when it inflates. Avoid yellow connectors. They are probably part of the air bag system. Be sure to follow proper service procedures, and make sure the person performing work for you is qualified to do so.


The air bag system does not need regular maintenance. Center Passenger Position


If your vehicle ever gets into a lot of water -- such as water up to the carpeting or higher -- or if water enters your vehicle and soaks the carpet, the air bag controller can be soaked and ruined. If this ever happens, and then you start your vehicle, the damage could make the air bags inflate, even if there’s no crash. You would have to replace the air bags as well as the sensors and related parts. If your vehicle is ever in a flood, or if it’s exposed to water that soaks the carpet, you can avoid needless repair costs by turning off the vehicle immediately. Don’t let anyone start the vehicle, even to tow it, unless the battery cables are first disconnected. Servicing Your Air Bag-Equipped Vehicle Air bags affect how your vehicle should be serviced. There are parts of the air bag system in several places around your vehicle. You don’t want the system to inflate while someone is working on your vehicle. Your dealer and the Bonneville Service Manual have information about servicing your vehicle and the air bag system. To purchase a service manual, see “Service and Owner Publications” in the Index.


1-24


Lap Belt If your vehicle has front and rear bench seats, someone can sit in the center positions.


When you sit in a center seating position, you have a lap safety belt, which has no retractor. To make the belt longer, tilt the latch plate and pull it along the belt.


To make the belt shorter, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt. If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.


Rear Seat Passengers It’s very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who aren’t safety belted can be thrown out of the vehicle in a crash. And they can strike others in the vehicle who are wearing safety belts. Rear Seat Outside Passenger Positions


Lap-Shoulder Belt The positions next to the windows have lap-shoulder belts. Here’s how to wear one DroDerly.


1. Pick up the latch plate and pull the belt across you.


Don’t let it get twisted.


2. Push the latch plate into the buckle until it clicks.


1-26


- . . .. . . .. .. . . . . .. . . . . . . . .... . . . . .. . . .. .


.. ..


If the belt stops before it reaches the buckle, tilt the latch plate and keep pulling until you can buckle it. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle is positioned would be able to unbuckle the safety belt quickly if you ever had to.


so you


3. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder part.


1-27


The safety belt locks if there’s a sudden stop or a crash.


You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body.


The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.


1-28


There is one guide for each outside passenger position the rear seat. To provide added safety belt comfort for children who have outgrown child restraints and for smaller adults, the comfort guides may be installed on the shoulder belts. Here’s how to install a comfort guide and use the safety belt:


in


To unlatch the belt, just push the button on the buckle. Rear Safety Belt Comfort Guides for Children and Small Adults Rear shoulder belt comfort guides will provide added safety belt comfort for children who have outgrown child restraints and for small adults. When installed on a shoulder belt, the comfort guide pulls the belt away from the neck and head.


1. Pull the elastic cord out from between the edge of to remove the


the seatback and the interior body guide from its storage clip.


2. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt, and insert the two edges of the belt into the slots of the guide.


3. Be sure that the belt is not twisted and it lies flat. The


elastic cord must be under the belt and the guide on top.


1-30


Children Everyone in a vehicle needs protection! That includes infants and all children smaller than adult size. Neither the distance traveled nor the age and changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle. Smaller Children and Babies


size of the traveler


I A CAUTION:


- -


4. Buckle, position and release the safety belt as


described in “Rear Seat Outside Passenger Positions’’ earlier in this section. Make sure that the shoulder belt crosses the shoulder.


To remove and store the comfort guides, squeeze the belt edges together so that you can take them out Erom the guides. Pull the guide upward to expose its storage clip, and then slide the guide onto the clip. Rotate the guide and clip inward and in between the seatback and the interior body, leaving only the loop of elastic cord exposed.


Children who are up against, or very close to, any air bag when it inflates can be seriously injured or killed. This is true even though your vehicle has reduced-force fmntal air bags. Air bags plus lap-shoulder belts offer the best protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide. Always secure children properly in your vehicle.


1-31


’ A CAUTION:


Smaller children and babies should always be restrained in a child or infant restraint. The instructions for the restraint will say whether it is the right type and size for your child. A very young child’s hip bones are so small that a regular belt might not stay low on the hips, as it should. Instead, the belt will likely be over the child’s abdomen. In a crash, the belt would apply force right on the child’s abdomen, which could cause serious or fatal injuries. So, be sure that any child small enough for one is always properly restrained in a child or infant restraint.


Infants need complete support, including support for the head and neck. This is necessary because an infant’s neck is weak and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing restraint settles into the restraint, so the crash forces can be distributed across the strongest part of the infant’s body, the back and shoulders. A baby should be secured in an appropriate infant restraint. This is so important that many hospitals today won’t release a newborn infant to its parents unless there is an infant restraint available for the baby’s first trip in a motor vehicle.


1-32


at only 25 mph (40 km/h), a 12-1b. (5.5 kg) baby will suddenly become a 2404b. (110 kg) force on your arms. The baby would be almost impossible to hold. Secure the baby in an infant restraint.


Never hold a baby in your arms while riding in a


vehicle. A baby doesn’t weigh much -- until a


crash. During a crash a baby will become so heavy you can’t hold it. For example, in a crash


CAUTION: (Continued)


1-33


Child Restraints Every time infants and young children ride vehicles, they should have protection provided by appropriate restraints. @ What are the different types of add-on


in


child restraints?


A: Add-on child restraints are available in four basic types. When selecting a child restraint, take into consideration not only the child’s weight and size, but also whether or not the restraint will be compatible with the motor vehicle in which be used.


it will


An infant car bed (A) is a special bed made for use in a motor vehicle. It’s an infant restraint system designed to restrain or position a child on a continuous flat surface. With an infant car bed, make sure that the infant’s head rests toward the center of the vehicle.


1-34


A rear-facing infant restraint (B) positions an infant to face the rear of the vehicle. Rear-facing infant restraints are designed for infants of up to about 20 lbs. (9 kg) and about one year of age. This type of restraint faces the rear so that the infant’s head, neck and body can have the support they need in a crash. Some infant seats come in two parts -- the base stays secured in the vehicle and the seat part is removable.


1-35


A forward-facing child restraint (C-E) positions a child upright to face forward in the vehicle. These forward-facing restraints are designed to help protect children who are from 20 to 40 lbs. (9 to 18 kg) and about 26 to 40 inches (66 to 102 cm) in height, or up to around four years of age. One type, a convertible restraint, is designed to be used either as a rear-facing infant seat or a forward-facing child seat.


1-36


A booster seat (F, G) is designed for children who are about 40 to 60 lbs. (18 to 27 kg) and about four to eight years of age. It’s designed to improve the fit of the vehicle’s safety belt system. Booster seats with shields use lap-only belts; however, booster seats without shields use lap-shoulder belts. Booster seats can also help a child to see out the window.


1-37


When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets Federal Motor Vehicle Safety Standards. Then follow the instructions for the restraint. You may find these instructions on the restraint itself in booklet, or both. These restraints use the belt system your vehicle, but the child also has to be secured within the restraint to help reduce the chance of personal injury. The instructions that come with the infant restraint will show you how to do that. Both the owner’s manual and the child restraint instructions are important, so if either one of these is not available, obtain a replacement copy from the manufacturer.


or child


or in a


Where to Put the Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. We at General Motors therefore recommend that you put your child restraint in the rear seat. Never put a rear-facing child restraint in the front passenger seat. Here’s why:


A child in a rearfacing child restraint can be seriously injured if the right front passenger’s air bag inflates, even though your vehicle has reduced-force frontal air bags. This is because the back of the rearfacing child restraint would be very close to the inflating air bag. Always secure a rearfacing child restraint in a rear seat. You may, however, secure a forward-facing child restraint in the right front seat, but before you do, always move the front passenger seat as far back as it will go. It’s better to secure the child restraint in the rear seat.


1-38


I Top Strap


A child in a child restraint in the center front seat can be badly injured by the right front passenger air bag if it inflates, even though your vehicle has reduced-force frontal air bags. Never secure a child restraint in the center front seat. It’s always better to secure a child restraint in the rear seat. You may secure a forward-facing child restraint in the right front passenger seat, but before you do, always move the passenger seat as far back as it will go. It’s better to secure the child restraint in a rear seat.


Wherever you install it, be sure to secure the child restraint properly. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in your vehicle -- even when no child is in it.


If your child restraint has a top strap, it should be anchored. If you need to have an anchor installed, you it in for you. If you can ask your Pontiac dealer to put want to install an anchor yourself, your dealer can tell you how to do it. Canadian law requires that child restraints have a top strap, and that the strap be anchored.


1-39


If your child restraint has a top strap, your dealer can obtain a kit with anchor hardware and installation instructions specifically designed for this vehicle. The deder can then install the anchor for you. In Canada, this work will be done for you free of charge. Or, you may install the anchor yourself using the instructions provided in the kit. Securing a Child Restraint in a Rear Outside Seat Position


2. Pick up the latch plate, and run the lap and shoulder


portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how.


You’ll be using the lap-shoulder belt. See the earlier part about the top strap if the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. 1. Put the restraint on the seat.


3. Tilt the latch plate to adjust the belt if needed.


If the shoulder belt goes in front of the child’s face or neck, put it behind the child restraint.


1-40


4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.


5 .


6.


To tighten the belt, pull up on the shoulder belt while you push down on the child restraint. If you’re using a forward-facing child restraint, you may find it helpful to use your knee restraint as you tighten the belt. Push and pull the child restraint in different directions to be sure it is secure.


to push down on the child


1-41


To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt to work for an adult will move freely again and be ready or larger child passenger. Securing a Child Restraint in the Center Rear Seat Position


A child in a child restraint in the center front seat can be badly injured or killed by the right front passenger air bag if it inflates, even though your vehicle has reduced-force frontal air bags. Never secure a child restraint in the center front seat. It’s always better to secure a child restraint in the rear seat. You may secure a forward-facing child restraint in the right front passenger seat, but before you do, always move the front passenger seat as far back as it will go. It’s better to secure the child restraint in a rear seat.


You’ll be using the lap belt. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.


See the earlier part about the top strap if the child restraint has one.


1-42


f


1. Make the belt as long as possible by tilting the latch


plate and pulling it along the belt.


2. Put the restraint on the seat. 3. Run the vehicle’s safety belt through or around the


restraint. The child restraint instructions will show you how.


4.


5.


6.


Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. To tighten the belt, pull its free end while you push down on the child restraint. If you’re using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt. Push and pull the child restraint in different directions to be sure it is secure.


1-43


To remove the child restraint, just unbuckle the vehicle’s safety belt. It will be ready to work for an adult or larger child passenger. Securing a Child Restraint in the Right Front Seat Position


Your vehicle has a right front passenger air bag. Never put a rear-facing child restraint in this seat. Here’s why:


I A CAUTION:



A child in a rearfacing child restraint can be seriously injured if the right front passenger’s air bag inflates, even though your vehicle has


CAUTION: (Continued)


1-44


reduced-force frontal air bags. This is because the back of a rearfacing child restraint would be very close to the inflating air bag. Always secure a rearfacing child restraint in the rear seat.


You’ll be using the lap-shoulder belt. See the earlier part about the top strap if. the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. 1. Because your vehicle has a right front passenger air


bag, always move the seat as far back as it will go before securing a forward-facing child restraint. (See “Seats” in the Index.)


2. Put the restraint on the seat. 3. Pick up the latch plate, and run the lap and shoulder


portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. If the shoulder belt goes in front of the child’s face or neck, put it behind the child restraint.


A


4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.


5. Pull the rest of the lap belt all the way out of the


retractor to set the lock.


1-45


Larger Children


t '


6. To tighten the belt, feed the lap belt back into the


retractor while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt.


7. Push and pull the child restraint in different


directions to be sure it is secure.


To remove the child restraint, just unbuckle the vehicle's safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger. 1-46


Children who have outgrown child restraints should wear the vehicle's safety belts. If you have the choice, a child should sit next to a window so the child can wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide.


Accident statistics show that children are safer are restrained in the rear seat. But they need to use the safety belts properly.


if they


Children who aren’t buckled up can be thrown out in a crash. Children who aren’t buckled up can strike other people who are.


Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. &.’ What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck?


A: Move the child toward the center of the vehicle, but


be sure that the shoulder belt still is on the child’s shoulder, so that in a crash the child’s upper body would have the restraint that belts provide. child is sitting in a rear seat outside position, see “Rear Safety Belt Comfort Guides” in the Index. If the child is so small that the shoulder belt is still very close to the child’s face or neck, you might want to place the child in the center seat position, the one that has only a lap belt.


If the


1-47


/1\ CAUTION: .


Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen. That could cause serious or fatal injuries.


Wherever the child sits, the lap portion of the belt should be worn low and snug on the hips, just touching the child’s thighs. This applies belt force to the child’s pelvic bones in a crash.


1-48


Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order you an extender. It’s free. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you. The extender will be just for you, and just for the seat in your vehicle that you choose. Don’t let someone else use it, and use it only for the seat it is made to fit. To wear it, just attach it to the regular safety belt. Checking Your Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other If you see loose or damaged safety belt system parts. anything that might keep a safety belt system from doing its job, have it repaired. Tom or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away. Also look for any opened or broken air bag covers, and have them repaired or replaced. (The air bag system does not need regular maintenance.)


Replacing Restraint System Parts After a Crash If you’ve had a crash, do you need new belts? After a very minor collision, nothing may be necessary. But if the belts were stretched, as they would be if worn during a more severe crash, then you need new belts. If belts are cut or damaged, replace them. Collision damage also may mean you will need to have safety belt or seat parts repaired or replaced. New parts and repairs may be necessary even if the belt wasn’t being used at the time of the collision. If your seat adjuster won’t work after a crash, the special part of the safety belt that goes through adjuster may need to be replaced. If an air bag inflates, you’ll need to replace air bag system parts. See the part on the air bag system earlier in this section.


the seat to the


&J NOTES


1-50


Section 2 Features and Controls


your vehicle, and information on starting, Here you can learn about the many standard and optional features on shifting and braking. Also explained are the instrument panel and the warning systems that tell you if everything is working properly -- and what to do if you have a problem. 2-2 2-4 2- 10 2- 14 2-15 2-16 2-18 2- 19 2-20 2-21 2-23 2-24 2-28 2-29 2-32 2-33 2-33


Running Your Engine While You’re Parked Windows Horn Tilt Wheel Turn SignaYMultifunction Lever Exterior Lamps Interior Lamps Mirrors Storage Compartments Sun Visors Air Inflator System (Option) Sunroof (Option) Instrument Panel Warning Lights, Gages and Indicators Head-Up Display (Option) Driver Information Center (Option) Electronic Compass (Option)


Keys Door Locks Remote Keyless Entry (Option) TnXnk Theft Universal Theft-Deterrent (Option) [email protected] I1 New Vehicle “Break-In” Ignition Positions Starting Your Engine Engine Coolant Heater (If Equipped) Automatic Transaxle Operation Computer Command Ride (Option) Shifting Into PARK (P) Shifting Out of PARK (P) Parking Over Things That Burn Engine Exhaust


2-34 2-35 2-35 2-36 2-36 2-43 2-46 2-48 2-5 1 2-53 2-54 2-55 2-56 2-62 2-74 2-77 2-79


2-1


Keys


' A CAUTION:


Leaving young children in a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate power windows or other controls or even make the vehicle move. Don't leave the keys in a vehicle with young children.


2-2


When a new vehicle is delivered, the dealer removes the plugs from the keys, and gives them to the first owner. However, the ignition key may not have a plug. If the ignition key doesn’t have a plug, it will have a bar-coded key tag. Each plug or tag has a code on it that tells your dealer or a qualified locksmith how to make extra keys. Keep the If you lose your keys, plugs or the tags in a safe place. you’ll be able to have new ones made easily using these plugs or the tag. If you need a new key, contact your dealer who can obtain the correct key code. Remember to carry the pre-cut emergency key which Pontiac sends after delivery. In an emergency, call Pontiac Roadside Assistance at 1 -800-ROADSIDE or 1 -8oO-762-3743. In Canada, call 1-800-268-6800.


NOTICE:


Your vehicle has a number of features that can help prevent the& But you can have a lot of trouble getting into your vehicle if you ever lock your keys inside. You m a y even have to damage your vehicle to get in. So be sure you have extra keys.


2-3


Unlocked doors can be dangerous.


Door Locks A CAUTION: ~ I Passengers -- especially children -- can easily open the doors and fall out. When a door is locked, the inside handle won’t open it. Outsiders can easily enter through an unlocked door when you slow down or stop your vehicle. This may not be so obvious: You increase the chance of being thrown out of the vehicle in a crash if the doors aren’t locked. Wear safety belts properly, lock your doors, and you will be far better off whenever you drive your vehicle.


mere are several ways to lock and unlock your vehicle.


From the outside, use your door key or remote keyless entry transmitter, if your vehicle has this option. With your door key, turning the key toward the rear of the vehicle will lock the door and turning the key toward the front of the vehicle will unlock it. If your vehicle has a theft-deterrent system and it is activated, unlock the doors only with the key or remote keyless entry system. This will avoid setting off the alarm.


To lock the door from the inside, slide the locking lever rearward. To unlock the door, slide the locking lever forward.


2-4


Power Door Locks


With power door locks, you can lock or unlock all the doors of your vehicle using the driver’s or front passenger’s door lock switch. The switch on each rear door works only that door’s lock. It won’t lock (or unlock) all of the doors -- this is a safety feature.


Programmable Automatic Door Locks (Option) Close the doors and turn on the ignition. Every time you move the shift lever out of PARK (P), all of the doors will lock. And, every time you stop and move the shift lever into PARK (P) and turn the ignition OFF, the doors will unlock. If someone needs to get out while you’re not in PARK (P), have that person use the manual or power lock. When the door is closed again, it will not lock automatically. Just use the manual or power lock to lock the door again. Overriding Lock Delay If you need to lock your doors before shifting out of PARK (P), just use the manual or power lock button to lock the doors.


2-5


Vehicles are delivered programmed in Mode 3. If your vehicle is equipped with remote keyless entry, use the following procedure to change modes: 1.


in


Close all the doors and turn the ignition on. Keep all doors closed throughout this procedure. Press and hold the driver’s power door lock switch the LOCK position through Step 4. Press the LOCK button on the remote keyless entry transmitter. The automatic door locks will remain in the current mode. Press the LOCK button on the transmitter again. Each time the transmitter’s LOCK button is pressed, the mode will advance by one, going from 3 to 1 to 2, etc. Note: The door locks will cycle according to the mode entered while customizing the memory door. (Mode “0” has no feedback.) Release the power door lock switch. The automatic door locks will remain in the most recent mode selected.


2.


3.


4.


5.


Customizing Your Automatic Door Locks Feature You can program the automatic door locks feature to change to the following modes:


Mode


Operation No automatic door lock or unlock. All doors automatically lock when shifted out of PARK (P). No automatic door unlock. All doors automatically lock when shifted out of PARK (P). Only the driver’s door automatically unlocks when shifted into PARK (P) and the key is turned to OFF. All doors automatically lock when shifted out of PARK (P). All doors automatically unlock when shifted into PARK (P)and the key is turned to OFF.


2-6


If your vehicle is not equipped with remote keyless entry, use the following procedure to change modes: 1. Close all doors and turn the ignition on. Keep all


doors closed throughout this procedure.


2. Press and hold thedriver’s power door lock switch in


the LOCK position through Step 3.


3. Cycle the shift lever, starting in PARK (P), through the


gear selections to advance by one mode for each cycle. After the first cycle, you will hear a door locking action, which identifies the current mode.


4. Release the power door lock switch. Delayed Locking (Option) This feature lets the driver delay the actual locking of the vehicle. When the power door lock switch is pressed with the key removed from the ignition and the driver’s door open, a chime will sound three times to signal that the delayed locking system is active. When all doors have been closed, the doors will lock automatically after five seconds. If any door is opened before this, the five-second timer will reset itself once all been closed again. Pressing the door lock switch twice within two seconds will override this feature.


the doors have


Personalization Programming The delayed locking feature can be turned on or off for each driver’s remote keyless entry transmitter. Vehicles are delivered with each remote keyless entry transmitter defaulted with delayed locking off. If your vehicle has the remote keyless entry system, do the following to turn the feature on: 1. Press and hold the power door lock switch


in the LOCK position throughout this procedure. All the doors will lock.


2. Press the UNLOCK button on the transmitter. The lock delay is still off and all the doors will remain locked.


3. Press the UNLOCK button on the transmitter


again. Lock delay is now active and all the doors will unlock.


4. Release the power door lock switch. To turn this feature off, repeat the previous procedure. This procedure changes the mode for only the transmitter used to change this setting. The procedure will need to be repeated for the second transmitter.


2-7


If your vehicle is not equipped with remote keyless entry, the delayed locking feature can be turned on or off by using the following procedure: 1. With the ignition on, press and hold the driver's


power door lock switch. All doors will lock.


2. Cycle the headlamp switch four times. On the third


cycle, the doors will unlock to confirm that the feature has been turned on. Your doors will remain locked if delayed locking is now in the non-active mode.


3. To change modes, cycle the headlamp switch once


more. A locking action will confirm the new mode.


4. Release the power door lock switch. This procedure must be completed within 10 seconds of pressing the power door lock switch. To turn the feature off, repeat the previous procedure.


Rear Door Security Lock


Your vehicle is equipped with rear door security locks that help prevent passengers from opening the rear doors of your car from the inside.


To use one of these locks: 1. Move the lever all the way up to the


ENGAGED position.


2. Close the door. 3. Do the same thing to the other rear door lock.


2-8


The rear doors of your vehicle cannot be opened from inside when this feature is in use. If you want to open a rear door when the security lock is on: 1. Unlock the door. 2. Then open the door from the outside. If you don’t cancel the security lock feature, adults or older children who ride in the rear won’t be able to open the rear door from the inside. You should let adults and older children know how these security locks work, and how to cancel the locks. To cancel the rear door lock: 1. Unlock the door and open the door from the outside. 2. Move the lever all the way down. 3. Do the same for the other rear door. The rear door locks will now work normally.


Anti-Lockout Feature if the key is left in the The power door locks will not work ignition with the driver’s door open. You can override this feature by holding the power door lock switch for more than three seconds, unless the engine is running. Leaving Your Vehicle If you are leaving the vehicle, take your keys, open your door and set the locks from the inside. Then get out and close the door. You may also use the lock button on the remote keyless entry transmitter after shutting the doors. If your vehicle has a theft-deterrent system, see “Universal Theft-Deterrent” in the Index.


2-9


Remote Keyless Entry (Option) If your vehicle has this option, you can lock and unlock your doors or unlock your trunk from about 3 feet (1 m) up to 30 feet (9 m) away using the remote


Your Remote Keyless Entry System operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.


2-10


This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment. This system has a range of about 3 feet (1 m) up to 30 feet (9 m). At times you may notice a decrease in range. This is normal for any remote keyless entry system. If the transmitter does not work or if you have to stand closer to your vehicle for the transmitter to work, try this:


Check to determine if battery replacement or resynchronization is necessary. See the instructions that follow. Check the distance. You may be too far from your vehicle. You may need to stand closer during rainy or snowy weather. Check the location. Other vehicles or objects may be blocking the signal. Take a few steps to the left or right, hold the transmitter higher, and try again. If you’re still having trouble, see your dealer or a qualified technician for service.


Operation The driver’s door will unlock when UNLOCK is pressed. The fuel door will also unlock when UNLOCK is pressed, if you have the optional fuel door lock. If UNLOCK is pressed again within five seconds, all doors will unlock. Pressing the UNLOCK button will also illuminate the interior lamps. See “Illuminated Entry” in the index. All doors will lock when LOCK is pressed. The trunk will unlock when the trunk symbol is pressed when the ignition is OFF. The trunk symbol will also work when the ignition is on, but only while in PARK (P). Instant Alarm When the button with the horn symbol on the key transmitter is pressed, the horn will sound and the headlamps and taillamps will flash for up to one minute. This can be turned off by pressing the instant alarm button again or by turning the ignition to ON. If your vehicle is equipped with the Universal Theft-Deterrent feature, you may also turn off the alarm by unlocking the vehicle with a key. See “Universal Theft-Deterrent” in the Index.


Resynchronization If only the instant alarm button works, the rransmitter needs to be resynchronized to the receiver. Do this by pressing and holding both the LOCK and UNLOCK buttons at the same time for about eight seconds. You must be within range of the vehicle. When the system has been resynchronized, the horn will chrp and the exterior lamps will flash once. The system should now operate properly. Personalization Features The following list of features that are available on your vehicle can be programmed to each driver’s preference for each of the key transmitters. Programmable Automatic Door Locks: This feature programs your door locks to automatically lock or unlock when shifting in and out of PARK (P). Security Feedback: This feature provides feedback to the driver when the vehicle receives a command from the key transmitter. Delayed Locking: This feature lets the driver delay the actual locking of the vehicle. When all doors have been closed, the doors will lock automatically after five seconds. For more detailed information and programming instructions, refer to the Index feature listed above.


for each individual


2-11


Security Feedback This provides feedback to the driver when the vehicle receives a command from the key transmitter. The following modes may be selected:


Mode


Security Feedback No feedback when locking or unlocking vehicle. No feedback when locking; headlamps and parking lamps flash when unlocking vehicle. Headlamps and parking lamps flash when locking; no feedback when unlocking vehicle. Headlamps and parking lamps flash when locking and when unlocking vehicle. Headlamps and parking lamps flash and horn chirps when locking; no feedback when unlocking vehicle. Headlamps and parking lamps flash and horn chirps when locking; headlamps and parking lamps flash when unlocking.


2-12


Vehicles are delivered programmed in Mode 5. To change to another mode: 1. Turn the ignition key to OFF. 2. Press and hold LOCK on the driver’s power door


lock switch located on the door panel.


3. Press the trunk button on the transmitter. The


transmitter will remain in its current mode.


4. Press the trunk button again. Each time the trunk button is pressed, the transmitter will advance to the next mode.


5. Release the power door lock switch. This procedure changes the mode for only the transmitter used to change this setting. The procedure will need to be repeated for the second transmitter. Matching Transmitter(s) To Your Vehicle Each remote keyless entry transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer. Remember to bring any remaining transmitters with you when you go to your dealer. When the dealer matches the replacement transmitter to your vehicle, any remaining transmitters must also be matched. Once your dealer has coded the new transmitter, the lost transmitter will not unlock your vehicle. Each vehicle can have only four transmitters matched to it.


Battery Replacement Under normal use, the battery in your remote keyless entry transmitter should last about two years. You can tell the battery is weak if the transmitter won’t If you have to work at the normal range in any location. get close to your vehicle before the trarisrnitter works, it’s probably time to change the battery.


NOTICE:


When replacing the battery, use care not to touch any of the circuitry. Static from your body transferred to these surfaces may damage the transmitter.


2.


3.


4.


5.


For battery replacement, use one Duracella battery, type DL-2032, or a similar type.


To replace the battery: 1.


Insert a coin into the notch near the key ring. Turn the coin to the left to separate the two halves of the transmitter. Once the transmitter is separated, use a pencil eraser to remove the old battery. Do not use a metal object. Remove and replace the battery. Replace it as the instructions inside the cover indicate. Snap the transmitter back together tightly to be sure no moisture can enter. Resynchronize the transmitter by pressing and holding the LOCK and UNLOCK buttons for about eight seconds. You,must be within range of the vehicle. When the transmitter has been resynchronized, the horn will chirp and the exterior lamps will flash once.


2-13


Trunk Trunk Lock Release To unlock the trunk from the outside, insert the door key and turn it. Remote Trunk Release (Option)


If you have this option, press the trunk release button located below the driver’s door armrest to release the trunk lid.


Remote Trunk Release Lockout (Option) The trunk release lockout switch in the trunk allows you to secure items in the trunk. By pressing the left side of the valet switch, the remote trunk release button below the driver’s door armrest will be disabled. Push the right side of the valet switch to enable the remote trunk release button to work again. Trunk Security Override (Option) Pressing the trunk symbol on the remote keyless entry transmitter opens the trunk even if the remote trunk release lockout switch is activated.


The ignition may be on or off and the transaxle must be in PARK (P). The system also works with the remote keyless entry system.


2-14


Trunk Lid


It can be dangerous to drive with the trunk lid open because carbon monoxide (CO) gas can come into your vehicle. You can’t see or smell CO. It can cause unconsciousness and even death. If you must drive with the trunk lid open or if electrical wiring or other cable connections must pass through the seal between the body and the trunk lid:


Make sure all windows are shut. Turn the fan on your heating or cooling system to its highest speed with the setting on ECON or VENT. That will force outside air into your vehicle. See “Comfort Controls” in the Index. If you have air outlets on or under the instrument panel, open them all the way.


See “Engine Exhaust” in the Index.


Theft Vehicle theft is big business, especially in some cities. Although your vehicle has a number of theft-deterrent features, we know that nothing we put on it can make it impossible to steal. However, there are ways you can help. Key in the Ignition If you leave your vehicle with the keys inside, it’s an easy target for joy riders or professional thieves -- so don’t do it. With the ignition off and the driver’s door open, you’ll hear a tone reminding you ignition and take it with you. Always do this. Your steering wheel will be locked, and so will your ignition and transaxle. And remember to lock the doors. Parking at Night Park in a lighted spot, close all windows and lock your vehicle. Remember to keep your valuables out of sight. Put them in a storage area, or take them with you.


to remove your key from the


2-15


Parking Lots If you park in a lot where someone will be watching your vehicle, it’s best to lock it up and take your keys. But what if you have to leave your ignition key?


Universal Theft-Deterrent (Option) If your vehicle has this option, it has a theft-deterrent alarm system. With this system, the SECURITY light will flash as you open the door (if your ignition is OFF).


lit area.


If possible, park in a busy, well Put your valuables in a storage area, like your trunk or glove box. Be sure to close and lock the storage area. Close all windows. Lock the glove box. Lock all the doors except the driver’s. Then take the door key and remote keyless entry transmitter with you.


SECURITY


This light reminds you to activate the theft-deterrent system when leaving your vehicle.


Activating the system: 1. Open the door. 2. Lock the door with the power door lock switch while


the door is open, or use the remote keyless entry transmitter. The SECURITY light should come on and stay on.


3. Close all doors. The SECURITY light should go


off after about 30 seconds and the system will then be armed.


2-16


If the SECURITY light comes on for one minute and then shuts off while the ignition is on, the security system has detected a problem with itself. See your dealer for service. If a door or the trunk is opened without the key or remote keyless entry transmitter, or if the door key cylinders are damaged, the alarm will go off. It will also go off if the trunk lock is damaged. Your vehicle’s lamps will flash and the horn will sound for one minute, then will go off in order to save battery power. Remember, the theft-deterrent system won’t activate

Loading...
x