2004 Nissan Pathfinder Owners Manual

墌 04.3.9/R50-D/V5 墍

DRIVE BELTS

tion and tension.

under severe conditions require frequent checks of the battery fluid level.

WARNING

SDI1480

SDI1119

Be sure the ignition key is in the OFF or LOCK position. The engine could rotate unexpectedly.

1. Visually inspect each belt for signs of unusual wear, cuts, fraying oil adhesion or looseness. If the belt is in poor condition or loose, have it replaced or adjusted by your NISSAN dealer.

2. Have the belts checked regularly for condi-

Maintenance and do-it-yourself 8-19

墌 04.3.9/R50-D/V5 墍

SPARK PLUGS

AIR CLEANER

remove the spark plugs. An incorrect socket can cause damage the spark plugs.

SDI0145A

REPLACING SPARK PLUGS

WARNING

Be sure the engine and ignition switch are off and that the parking brake is engaged securely.

CAUTION

Be sure to use the correct socket to

8-20 Maintenance and do-it-yourself

Platinum-tipped spark plugs It is not necessary to replace the platinum- tipped spark plugs as frequently as the conven- tional type spark plugs since they will last much longer. Follow the maintenance schedule, but do not reuse them by cleaning or regapping. If replacement is required, see your NISSAN dealer for servicing. Always platinum-tipped spark plugs.

replace with

recommended

SDI1115

The filter element should not be cleaned and reused as it is given a special treatment. We recommended it be replaced according to the maintenance log shown in a separate “Service and Maintenance Guide”. When replacing the filter, wipe the inside of the air cleaner housing and the cover with a damp cloth.

WARNING

쐌 Operating the engine with the air cleaner removed can cause you or others to be burned. The air cleaner

墌 04.3.9/R50-D/V5 墍

not only cleans the air, it stops flame if the engine backfires. If it is not there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed and be care- ful working on the engine with the air cleaner removed.

쐌 Never pour fuel into the throttle body or attempt to start the engine with the air cleaner removed. Doing so could result in serious injury.

WINDSHIELD WIPER BLADES

CLEANING If your windshield is not clear after using the windshield washer of if a wiper blade chatters when running, wax or other material may be on the blade or windshield.

Clean the outside of the windshield with a washer solution or a mild detergent. Your wind- shield is clean if beads do not form when rinsing with clear water.

Clean the blade by wiping it with a cloth soaked in a washer solution or a mild detergent. Then rinse the blade with clear water. If your wind- shield is still not clear after cleaning the blades

DI0155MA

and using the wiper, replace the blades. REPLACING Replace the wiper blades if they are worn. 1. Pull the wiper arm. 2. Push the lock pin, then remove the wiper

blade. Insert the new wiper blade to the wiper arm until a click sounds.

3.

Maintenance and do-it-yourself 8-21

墌 04.3.9/R50-D/V5 墍

CAUTION

After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened.

Make sure the wiper blade contacts the glass, otherwise the arm may be dam- aged from wind pressure.

Worn windshield wiper blades can dam- age the windshield and impair driver vision.

PARKING BRAKE AND BRAKE PEDAL

DI1010-C

CHECKING PARKING BRAKE Pull the parking brake lever up. If the number of clicks is out of the range as listed above, see your NISSAN dealer.

SDI1136

If you wax the surface of the hood, be careful not to let wax get into the washer nozzle. This may cause clogging or im- proper windshield washer operation. If wax gets into the nozzle, remove it with a needle or small pin.

8-22 Maintenance and do-it-yourself

墌 04.3.9/R50-D/V5 墍

Self-adjusting brakes Your vehicle is equipped with self-adjusting brakes.

The front and rear brakes self-adjust every time the brake pedal is applied.

WARNING

See your NISSAN dealer and have it checked if the brake pedal height does not return to normal.

Brake pad wear indicators The disc brake pads on your vehicle have au- dible wear indicators. When a brake pad re- quires replacement, it will make a high pitched scraping or screeching sound when the vehicle is in motion whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the wear indicator sound is heard. Under some driving or climate conditions, occa- sional brake squeak, squeal or other noise may be heard. Occasional brake noise during light to moderate stops is normal and does not affect the function or performance of the brake system. The rear drum brakes (if so equipped) do not

have audible wear indicators. Should you ever hear an unusually loud noise from the rear drum brakes, have them inspected as soon as pos- sible by your NISSAN dealer. Proper brake inspection intervals should be followed. For additional information, see the separate “Service and Maintenance Guide”. BRAKE BOOSTER Check the brake booster function with the fol- lowing steps:

1. With the engine off, press and release the brake pedal several times. When brake pedal movement (distance of travel) remains the same from one pedal application to the next, continue on to the next step.

2. While depressing the brake pedal, start the engine. The pedal height should drop a little. 3. With the brake pedal depressed, stop the engine. Keeping the pedal depressed for about 30 seconds, the pedal height should not change.

4. Run the engine for one minute without de- pressing the brake pedal, then turn it off. Depress the brake pedal several times. The pedal travel distance will decrease gradually with each depression as the vacuum is re- leased from the booster.

Maintenance and do-it-yourself 8-23

墌 04.3.9/R50-D/V5 墍

DI0453

CHECKING BRAKE PEDAL With the engine running, check distance A between the upper surface of the pedal and the dash lower panel. Distance A

M/T models

2-1/2 in (65 mm) or more

A/T models

2-3/4 in (70 mm) or more

If it is out of the range shown above, see your NISSAN dealer.

2. Open the engine hood. 3. Remove the fuse box cover. 4. Remove the fuse with the fuse puller. 5. 6.

If the fuse is open, replace it with a new fuse. If a new fuse opens again, have the electrical system checked and repaired by your NISSAN dealer.

Fusible links If any electrical equipment does not operate and fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace only with genuine NISSAN parts.

If the brakes do not operate properly, have the brake checked by your NISSAN dealer.

FUSES

SDI0395

ENGINE COMPARTMENT

CAUTION

Never use a fuse of higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire.

If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition key and the headlight

switch are OFF.

8-24 Maintenance and do-it-yourself

墌 04.3.9/R50-D/V5 墍

PASSENGER COMPARTMENT If any electrical equipment does not operate, check for an open fuse.

1. Be sure the ignition key and the headlight

switch are OFF.

2. Pull to open the fuse box cover/coin tray.

3. Pull down the fuse box cover/coin tray to

remove it.

4. Remove the fuse with the fuse puller.

5.

6.

If the fuse is open, replace it with a new fuse.

If a new fuse opens again, have the electrical

system checked and repaired by NISSAN dealer.

your

SDI1169

SPA1374

KEYFOB BATTERY REPLACEMENT Replace the battery as follows:

1. Open the lid using a suitable tool.

2. Replace the battery with a new one.

Maintenance and do-it-yourself 8-25

墌 04.3.9/R50-D/V5 墍

could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, in- cluding interference that may cause undes- ired operation of the device.

Recommended battery: Sanyo CR2025 or equivalent Make sure that the ⊕ side faces the bottom case.

3. Close the lid securely.

4. Push the keyfob button two or three times to

check its operation.

See your NISSAN dealer if you need any assis- tance for replacement. If the battery is removed for any reason other than replacement, perform step 4
above. 쐌 Be careful not to touch a circuit board

and a battery terminal.

쐌 An improperly disposed battery can harm the environment. Always confirm local regulations for battery disposal.

쐌 The keyfob is water-resistant; however, immediately wipe

if it does get wet, completely dry.

쐌 When changing batteries, do not let

dust or oil get on the controller.

FCC Notice: Changes or modifications not expressly approved by the manufacturer compliance 8-26 Maintenance and do-it-yourself

墌 04.3.9/R50-D/V5 墍

LIGHTS

SDI1439
Maintenance and do-it-yourself 8-27

墌 04.3.9/R50-D/V5 墍

HEADLIGHTS The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. A bulb can be replaced inside the engine compart- ment without removing the headlight assembly.

6.

Install the new bulb in the reverse order of removal.

Aiming is not necessary after replacing the bulb. When aiming adjustment is neces- sary, contact your NISSAN dealer.

CAUTION

쐌 Do not touch the bulb. 쐌 Use the same number and wattage as

originally installed:

Wattage 60/55
Bulb No. HB2

쐌 Do not leave the bulb out of the headlight reflector for a long period of time as dust, moisture, and smoke may enter the headlight body and affect the performance of the head- light.

CAUTION

쐌 High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped.

쐌 When handling the bulb, do not touch

the glass envelope.

Removing the headlight bulb 1. Disconnect the battery negative cable.

2. Disconnect the electrical connector from the

rear end of the bulb.

3. Pull off the rubber cap.

4. Push and turn the retaining pin to loosen it.

5. Remove the headlight bulb. Do not shake or

rotate the bulb when removing it.

8-28 Maintenance and do-it-yourself

SDI1126

墌 04.3.9/R50-D/V5 墍

Item

Wattage (W)

Front combination light

Front fog light (H3 type)

Rear combination light

Turn signal

Stop/Tail

Back-up

High mounted stop light

License plate light

Interior light

Vanity mirror light

Personal light

Bulb identification

21/5

55

27

21/5

18

10

1.4

Bulb No.

7443

1156NA

7443

921

168

168

—

—

—

MDI0006

Replacement procedures All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens and/or cover.

Maintenance and do-it-yourself 8-29

墌 04.3.9/R50-D/V5 墍

8-30 Maintenance and do-it-yourself

SDI1137

SDI0911

SDI1117

墌 04.3.9/R50-D/V5 墍

WHEELS AND TIRES

TIRE PRESSURE Tire inflation pressure Check the pressure of the tires (including the spare) often and always prior to long distance trips. The recommended tire pressure specifica- tions are shown on the Tire and Loading Infor- mation label under the “Recommended Cold Tire Inflation Pressure” heading. The tire and Loading Information label is affixed to the driver side center pillar. Tire pressures should be checked regularly because: 쐌 Most tires naturally lose air over time. 쐌 Tires can lose air suddenly when driven over potholes or other objects or if the vehicle strikes a curb while parking.

The tire pressures should be check when the tires are cold. The tires are considered COLD after the vehicle has been parked for 3 or more hours, or driven less than 1 mile (1.6 km) at moderate speeds. Incorrect tire pressure, including under in- flation, may adversely affect tire life and vehicle handling.

SDI0333B

Maintenance and do-it-yourself 8-31

墌 04.3.9/R50-D/V5 墍

SDI0980A

WARNING

쐌 Improperly inflated tires can fail sud-

denly and cause an accident.

쐌 The vehicle weight capacity is indi- cated on the Tire and Loading Infor- mation label. Do not load your ve- hicle beyond this capacity. Over- loading your vehicle may result in reduced tire life, unsafe operating conditions due to premature tire mal- functions, or unfavorable handling characteristics and could also lead to a serious accident. Loading beyond the specified capacity may also result in a malfunction of other vehicle components.

쐌 Before taking a long trip, or when- ever you heavily load your vehicle, use a tire pressure gauge to ensure that the tire pressures are at the specified level.

쐌 Do not drive your vehicle over 85
MPH (137 km/h) unless it is equipped

8-32 Maintenance and do-it-yourself

with high-speed capability tires. Driv- ing faster than 85 MPH (137 km/h) may result in tire malfunction, loss of control and possible injury.

쐌 For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety In- formation” (Canada) in the Warranty Information Booklet.

Low tire pressure warning system (if so equipped) The low tire pressure warning system monitors the tire pressure of all tires (except the spare tire) by sending a signal from a sensor that is installed in each wheel. For more details, refer to “Low tire pressure warning light” in the “2. Instruments and controls” section, “Low tire pressure warn- ing system” in the “5. Starting and driving” section, and “Flat tire” in the “6. In case of emergency” section. The low tire pressure warn- ing system will activate only when the vehicle is driven at speeds above 20 MPH (32 km/h).

墌 04.3.9/R50-D/V5 墍

쎻4 Recommended cold tire inflation pressure: Inflate the tires to this pressure when the tires are cold. Tires are considered COLD after the vehicle has been parked for 3 or more hours, or driven less than 1 mile (1.6 km) at moderate speeds. The recommended cold tire inflation is set by the manufacturer to provide the best tire wear and vehicle han- dling characteristics based on the vehicles GVWR.

쎻5 Tire size — refer to “Tire labeling” later in this

section.

쎻6 and 쎻7 (if so equipped) Spare tire size or spare so

compact tire size (if equipped)

Tire and loading information label 쎻1 Seating capacity: The maximum number of occupants that can be seated in the vehicle.

SDI1574
쎻2 Vehicle load limit: See loading information in the Technical and consumer information sec- tion.

쎻3 Original tire size: The size of the tires origi- nally installed on the vehicle at the factory.

Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.

3. Remove the gauge. 4. Read the tire pressure on the gauge stem and compare it to the specification shown on Maintenance and do-it-yourself 8-33

墌 04.3.9/R50-D/V5 墍

the Tire and Loading Information label.

5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed. Install the valve stem cap.

6. 7. Check the pressure of all other tires, includ- ing the spare. (Refer to the “Wheels and tires” section.)

8-34 Maintenance and do-it-yourself

SDI1575

SDI1606

TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall in case of recall.

쎻1 Tire size (example: P215/60R16 94H) 1 P: The “P” indicates the tire is designed for

passenger vehicles.

2. Three-digit number (215): This number gives the width in millimeters of the tire from side- wall edge to sidewall edge. (Not all tires have this information.)

3. Two-digit number (60): This number, known as the aspect ratio, gives the tire’s ratio of height to width.

4. R: The “R” stands for radial. 5. Two-digit number (16): This number is the

wheel or rim diameter in inches.

墌 04.3.9/R50-D/V5 墍

6. Two- or three-digit number (94): This number is the tire’s load index. It is a measurement of how much weight each tire can support. You may not tires because it is not required by law.

find this information on all

7. H: Speed Rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods of time. The ratings range from 98 miles per hour (MPH) to 186 MPH. (You may not find this informa- tion on all tires because it is not required by law.)

SDI1607
쎻2 TIN (Tire Identification Number) for new tire

(example: DOT XX XX XXX XXXX)

1. DOT: Abbreviation for the “Department of Transportation”. The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. Two-digit code: Manufacturer’s identification

mark

3. Two-digit code: Tire size 4. Three-digit code: Tire type code (Optional) 5. Four-digit code: Date of Manufacture

6. Four numbers represent the week and year the tire was built. For example, the numbers 3103 means the 31st week of 2003.

쎻3 Tire ply composition and material

layers or plies of rubber-

The number of coated fabric in the tire. Tire manufacturers also must indicate the materials in the tire, which include steel, nylon, polyester, and others.

쎻4 Maximum permissible inflation pressure

This number is the greatest amount of air pressure that should be put in the tire. Do not exceed the maximum permissible inflation pressure.

쎻5 Maximum load rating

This number indicates the maximum load in kilograms and pounds that can be carried by the tire. When replacing the tires on the vehicle, always use a tire that has the same load rating as the factory installed tire.

쎻6 Term of “tubeless” or “tube type”

Indicates that the tire requires an inner tube (“tube type”) or not (“tubeless”).

쎻7 The word “radial”

The word “radial” is shown, radial structure.

쎻8 Manufacturer or Brand name

if the tire has

Manufacturer or Brand name is shown.

Maintenance and do-it-yourself 8-35

墌 04.3.9/R50-D/V5 墍

TYPES OF TIRES

CAUTION

쐌 When changing or replacing tires, be sure all four tires are of the same type (i.e., summer, all season or snow) Your NISSAN dealer may be able to help you with information about tire type, size, speed rating and availability.

construction.

and

than

rating

쐌 Replacement tires may have a lower speed factory equipped tires, and may not match the potential maximum vehicle speed. Never exceed the maximum speed rating of the tire.

the

쐌 For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety In- formation” (Canada) in the Warranty Information booklet.

All season tires NISSAN specifies all season tires on some models to provide good performance for use all 8-36 Maintenance and do-it-yourself

year around, including snowy and icy road con- ditions. All season tires are identified by ALL SEASON and/or M&S on the tire sidewall. Snow tires have better snow traction than all season tires and may be more appropriate in some areas. Summer tires NISSAN specifies summer tires on some models to provide superior performance on dry roads. Summer tire performance in snow and ice will be substantially reduced. Summer tires do not have the tire traction rating M&S on the tire sidewall. If you operate your vehicle in snowy or icy conditions, NISSAN recommends the use of SNOW or ALL SEASON tires on all four wheels. Snow tires If snow tires are needed, it is necessary to select tires equivalent in size and load rating to the original equipment tires. it can adversely affect the safety and handling of your vehicle. Generally, snow tires will have lower speed ratings than factory equipped tires and may not match the potential maximum vehicle speed. Never exceed the maximum speed rating of the tire. If you install snow tires on four wheel drive

If you do not,

models, they must also be the same size, brand, construction and tread pattern on all four wheels.

If you operate your vehicle in snowy or icy conditions, NISSAN recommends the use of SNOW or ALL SEASON tire on all four wheels. For additional traction on icy roads, studded tires may be used. However, some provinces and states prohibit their use. Check local, state and provincial laws before installing studded tires. Skid and traction capabilities of studded snow tires, on wet or dry surfaces, may be poorer than that of non-studded snow tires. TIRE CHAINS Use of tire chains is prohibited according to location. Check the local laws before installing tire chains. When installing tire chains, make sure they are of proper size for the tires on your vehicle and are installed according to the chain manufacturer’s suggestions. Use only SAE class S chains. Class “S” chains are used on vehicles with restricted tire to vehicle clearance. Vehicles that can use Class “S” chains are designed to meet the SAE standard minimum clearances between the tire and the closest vehicle suspension or body component required to accommodate the use of a winter traction device (tire chains or cables). The minimum clearances are determined using the factory

墌 04.3.9/R50-D/V5 墍

equipped tire size. Other types may damage your vehicle. Use chain tensioners when recom- mended by the tire chain manufacturer to ensure a tight fit. Loose end links of the tire chain must be secured or removed to prevent the possibility of whipping action damage to the fenders or underbody. If possible, avoid fully loading your vehicle when using tire chains. In addition, drive at a reduced speed. Otherwise, your vehicle may be damaged and/or vehicle handling and perfor- mance may be adversely affected. Never install tire chains on TEMPORARY USE ONLY spare tires. Do not use tire chains on dry roads. Tire chains must be installed only on the rear wheels and not on the front wheels. Do not drive with tire chains on paved roads which are clear of snow. Driving with chains in such conditions can cause damage to the vari- ous mechanisms of the vehicle due to some overstress. When driving on clear paved roads, be sure to change to 2WD.

The wheel nuts must be kept tightened to speci- fication at all is recommended that wheel nuts be tightened to specification at each tire rotation interval.

times.

It

WARNING

쐌 After rotating the tires, adjust the tire

pressure.

쐌 Retighten the wheel nuts after the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.).

쐌 Do not include small size spare tire in

the tire rotation.

쐌 For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety In- formation” (Canada) in the Warranty Information booklet.

SDI0724

CHANGING WHEELS AND TIRES Tire rotation NISSAN recommends that tires be rotated every 7,500 miles (12,000 km). However, the timing for tire rotation may vary according to your driving habits and road surface conditions. See “Flat tire” in the “6. In case of emergency” section for tire replacing procedures.

Wheel nut tightening torque:

98 ft-lb (133 N⋅m)

Maintenance and do-it-yourself 8-37

墌 04.3.9/R50-D/V5 墍

indicator is visible, the tire should be replaced.

WARNING

쐌 Improper service for a TEMPORARY USE ONLY spare tire may result in serious personal injury. If it is neces- sary to repair the TEMPORARY USE ONLY spare your NISSAN dealer.

contact

tire,

쐌 For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety In- formation” (Canada) in the Warranty Information booklet.

MDI0004

Replacing wheels and tires When replacing a tire, use the same size, speed rating and load carrying capacity as originally equipped. See “Specifications” in the “9. Tech- nical and consumer information” section for tires and wheels.

Tire wear and damage

WARNING

쐌 Tires should be periodically

in- spected for wear, cracking, bulging or objects caught in the tread. If exces- sive wear, cracks, bulging or deep cuts are found, the tire should be replaced.

쐌 The original tires have a built-in tread indicator. When the wear

wear

8-38 Maintenance and do-it-yourself

쐌 The use of tires other than those recommended or the mixed use of tires of different brands, construction (bias, bias-belted or radial), or tread patterns can adversely affect the ride, braking, handling, ground clearance, body-to-tire clearance, tire chain clearance, speedometer calibration, headlight aim and bumper height. Some of these effects may lead to accidents and could result in serious personal injury.

쐌 If the wheels are changed for any reason, always replace with wheels which have the same offset dimen- sion. Wheels of a different offset could cause early tire wear, possibly degraded vehicle handling character- istics and/or interference with the brake discs. Such interference can lead to decreased braking efficiency and/or early brake pad wear.

쐌 When a spare tire is mounted or a

墌 04.3.9/R50-D/V5 墍

wheel is replaced, the low tire pres- sure warning system will not func- tion. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting. (For models with the low tire pressure warning system)

쐌 Do not install a deformed wheel or tire even if it has been repaired. Such wheels or tires could have structural damage and could fail without warn- ing.

쐌 The use of a retread tire is not rec-

ommended.

쐌 For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety In- formation” (Canada) in the Warranty Information booklet.

Four wheel drive models

CAUTION

Always use tires of the same size, brand, construction (bias, bias-belted or radial), and tread pattern on all four wheels. Failure to do so may result in a circumference difference between tires on the front and rear axles which will cause excessive tire wear and may dam- age the transmission, transfer case and differential gears.

If excessive tire wear is found, it is recommended that all four tires be replaced with tires of the same size, brand, construction and tread pat- tern. The tire pressure and wheel alignment should also be checked and corrected as nec- essary. Contact your NISSAN dealer. Wheel balance Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be balanced as required. Wheel balance service should be performed with the wheels off the vehicle. Spin balancing

the wheels on the vehicle could lead to mechani- cal damage. 쐌 For additional information regarding tires, re- fer to “Important Tire Safety Information” in the Warranty Information Booklet (US) or “Tire Safety Information” in the Warranty In- formation Booklet (Canada).

Care of wheels 쐌 Wash the wheels when washing the vehicle

to maintain their appearance.

쐌 Clean the inner side of the wheels when the is changed or the underside of the

wheel vehicle is washed.

쐌 Do not use abrasive cleaners when washing

the wheels.

쐌 Inspect wheel rims regularly for dents or corrosion. This may cause loss of pressure or damage the tire bead.

쐌 NISSAN recommends that the road wheels be waxed to protect against road salt in areas where it is used during winter.

TEMPORARY USE ONLY spare tire (if so equipped) U.S. only. Canadian vehicles are equipped with a full size spare tire.

Maintenance and do-it-yourself 8-39

墌 04.3.9/R50-D/V5 墍

Observe the following precautions if the TEM- PORARY USE ONLY spare tire must be used, otherwise your vehicle could be damaged or involved in an accident.

WARNING

쐌 The TEMPORARY USE ONLY spare tire should be used only for emer- gency. It should be replaced by the standard tire at the first opportunity. 쐌 Drive carefully while the TEMPO- RARY USE ONLY spare tire is in- stalled.

Avoid sharp turns and abrupt braking while driving.

쐌 Periodically check the TEMPORARY USE ONLY spare tire inflation pres- sure, and always keep it at 60 psi (420
kPa, 4.2 bar).

쐌 Always keep the pressure of the full size spare tire (if so equipped) at the recommended pressure for standard tires, as indicated on the Tire and Loading Information label. For The

8-40 Maintenance and do-it-yourself

Tire and Loading Information label location, see “Vehicle identification” in the “9. Technical and consumer information” section.

쐌 Do not drive your vehicle at speeds

faster than 50 MPH (80 km/h).

쐌 When driving on roads covered with snow or ice, the TEMPORARY USE ONLY spare tire should be used on the front axle and original tire used on the rear axle (drive wheels). Use tire chains only on the rear (original) tires.

쐌 Tire tread of the TEMPORARY USE ONLY spare tire will wear at a faster rate than the original tire. Replace the TEMPORARY USE ONLY spare tire as soon as the tread wear indica- tors appear.

쐌 Do not use the TEMPORARY USE

ONLY spare tire on other vehicles.

쐌 Do not use more than one TEMPO- RARY USE ONLY spare tire at the same time.

쐌 Do not tow a trailer while the TEM- PORARY USE ONLY spare tire is installed.

CAUTION

쐌 Do not use tire chains on a TEMPO- RARY USE ONLY spare tire. Tire chains will not fit properly on the TEMPORARY USE ONLY spare tire and may cause damage to the ve- hicle.

쐌 Because

the

TEMPORARY USE ONLY spare tire is smaller than the original tire, ground clearance is re- duced. To avoid damage to the ve- hicle do not drive over obstacles. Also do not drive the vehicle through an automatic car wash since it may get caught.

墌 04.3.9/R50-D/V5 墍

9 Technical and consumer information

Capacities and recommended fuel/lubricants................ 9-2
Fuel recommendation...................................................... 9-4
Engine oil and oil filter recommendation.................... 9-6
Recommended SAE oil viscosity number.................. 9-7
Air conditioning system refrigerant and lubricant recommendations............................................................. 9-7
Specifications.......................................................................... 9-9
Engine ................................................................................. 9-9
Wheels and tires ................................................................. 9-11
Dimensions and weights.............................................. 9-11

When traveling or registering your vehicle in another country.................................................................................... 9-12
Vehicle identification........................................................... 9-12
Vehicle identification number (VIN) plate ................ 9-12
Vehicle identification number (Chassis number) ............................................................................ 9-12
Engine serial number.................................................... 9-13
F.M.V.S.S. certification label....................................... 9-13
Emission control information label ............................ 9-13
Tire and Loading Information label............................ 9-14
Air conditioner specification label ............................. 9-14

Vehicle loading information............................................... 9-14
Terms................................................................................ 9-14
Vehicle load capacity.................................................... 9-15
Securing the load .......................................................... 9-16
Loading tips .................................................................... 9-17
Vehicle load capacity.................................................... 9-17
Measurement of weights ............................................. 9-17
Towing a trailer .................................................................... 9-18
Maximum load limits...................................................... 9-18
Towing load/specification chart................................. 9-20
Towing safety.................................................................. 9-20
Flat towing....................................................................... 9-22
Uniform tire quality grading......................................... 9-23
Emission control system warranty................................... 9-24
Reporting safety defects (US only) ................................ 9-24
Readiness for inspection/maintenance (I/M) test (US only)................................................................................ 9-25
Event data recorders ......................................................... 9-26
Owner’s Manual/Service Manual order information ... 9-27
In the event of a collision ............................................ 9-27

墌 04.3.9/R50-D/V5 墍

CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS

The following values are approximate capacities. The actual refill capacities may be a little different from them. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity.

US

measure

20-7/8 gal

5-1/4 qt

5-1/8 qt

Capacity (Approximate)

Imp

measure

17-3/8 gal

4-3/8 qt

4-1/4 qt

Fuel

Engine oil*4
Drain and refill

with oil filter change

without oil filter change

Cooling system (with heater and reservoir tank) *1: See later in this section for fuel recommendation. *2: See later in this section for recommended SAE viscosity number. *3: See later in this section for engine oil and oil filter recommendation. *4: See “Changing engine oil” in the “8. Maintenance and do-it-yourself” section for further details.

9-3/4 qt

8-1/8 qt

Liter

79

Recommended specifications

Unleaded gasoline with an octane rating of at least 91 AKI (RON 96) (VQ35DE)*1

5.0

4.8

9.2

쐌 API Certification Mark*2 *3
쐌 API grade SG/SH, Energy Conserving I &

II or API grade SJ, SL, Energy Conserv- ing*2 *3

쐌 ILSAC grade GF-I, GF-II & GF-III*2 *3

Genuine Nissan Long Life Anti-Freeze Coolant or equivalent

9-2 Technical and consumer information

墌 04.3.9/R50-D/V5 墍

Capacity (Approximate)

US

measure

Imp

measure

Liter

Manual transmission Differential gear oil (exc. LSD)

Limited-slip differential (LSD) gear oil

— —

—

— —

—

— —

—

Automatic transmission fluid

Power steering fluid (PSF)

All-mode 4WD transfer fluid

Transfer fluid

Brake and clutch fluid

Refill to the proper oil level according to the instructions in the “8. Maintenance and do-it-yourself” section.

Propeller shaft grease Multi-purpose grease Air conditioning system refrigerant Air conditioning system lubricants

— — — —

— — — —

— — — —

Recommended specifications

API GL-4 Viscosity SAE 75W-85
API GL-5 Viscosity SAE 80W-90*1
Only LSD gear oil: API GL-5 and SAE 80W-90*1 approved for Nissan LSD*2
Nissan Matic “D” (Continental U.S. and Alaska) or Canada NISSAN Automatic Transmission Fluid.*6
Genuine NISSAN PSF or equivalent*5
Nissan Matic “D” (Continental U.S. and Alaska) or Canada NISSAN Automatic Transmission Fluid.*6
Nissan Matic “D” (Continental U.S. and Alaska) or Canada NISSAN Automatic Transmission Fluid.*6 or API GL-4 Viscosity SAE 75W-90
Genuine Nissan Super Heavy Duty Brake Fluid*4 or equivalent DOT 3 (U.S. F.M.V.S.S. No. 116) NLGI No. 2 (Lithium soap base) NLGI No. 2 (Lithium soap base) HFC-134a (R-134a)*4
Nissan A/C System Oil Type S or exact equivalent*4

*1: For hot areas, viscosity SAE 90 is suitable for ambient temperatures above 0°C (32°F). *2: Contact your NISSAN dealer for a list of approved oils. *3: Available in mainland U.S. through your NISSAN dealer. *4: See “Vehicle identification” later in this section for air conditioner specification label. *5: For Canada, NISSAN Automatic Transmission Fluid (ATF), DEXRONTMIII/MERCONTM or equivalent ATF may also be used. *6: DexronTMIII/MerconTM or equivalent may also be used. Outside the continental U.S. and Alaska contact an authorized NISSAN dealer for more information regarding

suitable fluids, including recommended brand(s) of DEXRONTMIII/MERCONTM Automatic Transmission Fluid.

Technical and consumer information 9-3

墌 04.3.9/R50-D/V5 墍

FUEL RECOMMENDATION VQ35DE engine:

Use unleaded regular gasoline with an oc- tane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91). For performance, NISSAN recommends the use of unleaded premium gasoline with an octane rating of at least 91 AKI number (Research octane number 96).

improved

vehicle

CAUTION

Using a fuel other than that specified could adversely affect the emission con- trol devices and systems, and could also affect the warranty coverage.

Under no circumstances should a leaded gasoline be used since this will damage the three way catalyst.

Reformulated gasoline Some fuel suppliers are now producing reformu- lated gasolines. These gasolines are specially designed to reduce vehicle emissions. NISSAN 9-4 Technical and consumer information

supports efforts towards cleaner air and suggest that you use reformulated gasoline when avail- able. Gasoline containing oxygenates Some fuel suppliers sell gasoline containing oxygenates such as ethanol, MTBE and metha- nol with or without advertising their presence. Nissan does not recommend the use of fuels of which the oxygenate content and the fuel com- patibility for your Nissan cannot be readily deter- mined. If you use oxygenate-blend gasoline, please take the following precautions as the usage of such fuels may cause vehicle performance problems and/or fuel system damage. 쐌 The fuel should be unleaded and have an octane rating no lower than that recommended for unleaded gasoline.

쐌 If an oxygenate-blend, excepting a methanol blend, is used, it should con- tain no more than 10% oxygenate. (MTBE may, however, be added up to 15%.)

쐌 If a methanol blend is used, it should contain no more than 5% methanol (me- thyl alcohol, wood alcohol). It should also contain a suitable amount of ap- propriate cosolvents and corrosion in-

hibitors. If not properly formulated with appropriate cosolvents and corrosion inhibitors, such methanol blends may cause fuel system damage and/or ve- hicle performance problems. At this time, sufficient data is not available to ensure that all methanol blends are suitable for use in Nissan vehicles.

If any undesirable driveability problems such as engine stalling and hard hot starting are experi- enced after using oxygenate-blend fuels, imme- diately change to a non-oxygenate fuel or a fuel with a low blend of MTBE. Take care not to spill gasoline during refu- eling. Gasoline containing oxygenates can cause paint damage. Aftermarket fuel additives NISSAN does not recommend the use of any fuel additives (i.e.: fuel injector cleaner, octane removers, etc.) booster, which are sold commercially. Many of these additives intended for gum, varnish or deposit removal may contain active solvents or similar ingredients that can be harmful to the fuel sys- tem and engine. Octane rating tips In most parts of North America, you should use

intake valve deposit

墌 04.3.9/R50-D/V5 墍

NISSAN dealer or other competent service fa- cility. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills. This is no cause for concern, because you get the greatest fuel benefit when there is light spark knock for a short time.

(Anti-Knock

unleaded gasoline with an octane rating of at least 91 AKI Index) number (VQ35DE engine). However, you may use un- leaded gasoline with an octane rating as low as 85 AKI (Anti-Knock Index) number in these high altitude areas [over 4,000 ft (1,219 m)] such as: Colorado, Montana, New Mexico, Utah, Wyo- ming, northeastern Nevada, southern Idaho, western South Dakota, western Nebraska, and that part of Texas which is directly south of New Mexico. Using unleaded gasoline with an octane rating lower than stated above can cause persistent, heavy spark knock. (Spark knock is a metallic rapping noise.) If se- vere, this can lead to engine damage. If you detect a persistent heavy spark knock even when using gasoline of the stated octane rating, or if you hear steady spark knock while holding a steady speed on level roads, have your dealer correct the condi- tion. Failure to correct the condition is misuse of the vehicle, for which NISSAN is not responsible.

Incorrect ignition timing will result in knocking, after-run or overheating. This in turn may cause excessive fuel consumption or damage to the engine. If any of the above symptoms are en- countered, have your vehicle checked at a

Technical and consumer information 9-5

墌 04.3.9/R50-D/V5 墍

oils must however, meet the API quality and SAE viscosity ratings specified for your vehicle. Oil additives NISSAN does not recommend the use of oil additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed. Oil which may contain foreign matter or has been previously used should not be used. Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important that the engine oil viscosity be selected based on the temperatures at which the vehicle will be operated before the next oil change. The chart recommended SAE viscosity number shows the recommended oil viscosities for the expected ambient temperatures. Choosing an oil viscosity other than that recommended could cause seri- ous engine damage. Selecting the correct oil filter Your new vehicle is equipped with a high-quality genuine Nissan oil filter. When replacing, use the genuine oil filter or its equivalent for the reason described in change intervals.

ENGINE OIL AND OIL FILTER RECOMMENDATION Selecting the correct oil It is essential to choose the correct quality, and viscosity oil to ensure satisfactory engine life and performance. Nissan recommends the use of a low friction oil (energy conserving oil) in order to improve fuel economy and conserve energy. Oils which do not have the specified quality label should not be used as they could cause engine damage. Only those engine oils with the American Petro- leum Institute (API) CERTIFICATION MARK on 9-6 Technical and consumer information

STI0367

the front of the container should be used. This type of oil supersedes the existing API SG, SH, or SJ and Energy Conserving I & II categories.

If you cannot find engine oil with the API CER- TIFICATION MARK, use an API grade SG/SH, Energy Conserving I & II or API grade SJ, Energy Conserving oil. An oil with a single designation SG or SH, or in combination with other catego- ries (for example, SG/CC or SG/CD) may also be used if one with the API CERTIFICATION MARK cannot be found. An ILSAC grade GF-I & GF-II oil can also be used. NISSAN does not recommend synthetic type oils but recommends mineral based oils. These

墌 04.3.9/R50-D/V5 墍

RECOMMENDED SAE OIL VISCOSITY NUMBER

Change intervals The oil and oil filter change intervals for your engine are based on the use of the specified quality oils and filters. Oil and filter other than the specified quality, or oil and filter change intervals longer than recommended could reduce engine life. Damage to engines caused by improper maintenance or use of incorrect oil and filter quality and/or viscosity is not covered by the new Nissan vehicle warranties. Your engine was filled with a high quality engine oil when it was built. You do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more fre- quent oil and filter changes. — repeated short distance driving at cold out-

side temperatures,

— driving in dusty conditions, — extensive idling, — towing a trailer.

temperatures. SAE

SAE 5W-30 viscosity oil is preferred for all ambient 10W-30, 10W-40 viscosity oil may be used if the ambient temperature is above 0°F (−18°C). AIR CONDITIONING SYSTEM REFRIGERANT AND LUBRICANT RECOMMENDATIONS The air conditioning system in this NISSAN vehicle must be charged with the refriger- ant HFC-134a (R-134a) and the lubricant, Nissan A/C System Oil Type S or the exact equivalents.

CAUTION

The use of any other refrigerants or lubricants will cause severe damage to the air conditioning system and will re- quire the replacement of all air condi- tioning system components.

TI1028-C

The refrigerant HFC-134a (R-134a) in your NISSAN vehicle will not harm the earth’s ozone layer. Although this refrigerant does not affect the earth’s atmosphere, certain governmental regulations require the recovery and recycling of any refrigerant during automotive air condition- Technical and consumer information 9-7

墌 04.3.9/R50-D/V5 墍

ing system service. Your NISSAN dealer has the trained technicians and equipment needed to recover and recycle your air conditioning system refrigerant. Contact your NISSAN dealer when servicing your air conditioning system.

9-8 Technical and consumer information

墌 04.3.9/R50-D/V5 墍

Model

SPECIFICATIONS

ENGINE

Type Cylinder arrangement Bore × Stroke Displacement Firing order Idle speed Ignition timing (BTDC) CO percentage at idle speed Spark plug

Spark plug gap Camshaft operation Alternator belt size Width × Length

in (mm) cu in (cm3)

rpm degree/rpm [No air] %

in (mm)

in (mm)

VQ35DE

Gasoline, 4-cycle 6-cylinder, V-slanted at 60° 3.760 × 3.205 (95.5 × 81.4) 213.45 (3,498) 1-2-3-4-5-6

See the “Emission control label” on the underside of the hood.

PL FR5A-11 (Standard) PL FR4A-11 (Service option) PL FR6A-11 (Service option) 0.043 (1.1) Timing chain

0.8409 × 46.26 (21.36 × 1,175)

*1: Periodic maintenance is necessary. See “Periodic maintenance” in the “Service and Maintenance Guide” for maintenance intervals.

Technical and consumer information 9-9

墌 04.3.9/R50-D/V5 墍

TI0001-A

The spark ignition system of this vehicle meets all requirements of the Canadian Interference-Causing Equipment Regula- tions.

9-10 Technical and consumer information

墌 04.3.9/R50-D/V5 墍

WHEELS AND TIRES

Grade

Road wheel & offset in (mm)

Tire size & pressure (cold)

Spare tire size & pressure (cold)

XE

16x7JJ Aluminum/ 1.97 (50)

P245/70R16 106S 30 psi (210 kPa)

P245/70R16 106S 30 psi (210 kPa)

P215/80R16 103M*2
30 psi (210 kPa)

SE WIDE

16x7JJ Aluminum/ 0.79 (20)*1

P255/65R16 106S*1
30 psi (210 kPa)

P255/65R16 106S*1
30 psi (210 kPa)

P215/80R16 103M*2
30 psi (210 kPa)

LE WIDE

17x8JJ Aluminum/ 0.79 (20)

P245/65R17 105S 30 psi (210 kPa)

P245/65R17 105S 30 psi (210 kPa)

P215/80R16 103M*2
30 psi (210 kPa)

*1: Option for XE *2: If so equipped (for US)

DIMENSIONS AND WEIGHTS

PATHFINDER Overall length*1
Overall width

Overall height

Front tread

Rear tread

Wheelbase Gross vehicle weight rating Gross axle weight rating

Front Rear

in (mm) in (mm)

in (mm)

in (mm)

in (mm)

in (mm) lb (kg)

lb (kg) lb (kg)

182.7 (4,640) 69.7 (1,770) 71.7 (1,820)*2
68.1 (1,730) 67.9 (1,725)*2
58.3 (1,480) 60.6 (1,540)*2
58.5 (1,485) 60.8 (1,545)*2
106.3 (2,700) See the “F.M.V.S.S. certification label” on the driver’s side lock pillar.

*1: On spare tire carrier equipped models, the spare tire carrier adds 9.45 in (240

mm) to the overall length. *2: SE and LE wide models

Technical and consumer information 9-11

墌 04.3.9/R50-D/V5 墍

WHEN TRAVELING OR REGISTERING YOUR VEHICLE IN ANOTHER COUNTRY When planning to travel in another country, you should first find out if the fuel available is suitable for your vehicle’s engine. Using fuel with too low an octane rating may cause engine damage. All gasoline vehicles can be operated with unleaded gasoline. Therefore, avoid taking your ve- hicle to areas where appropriate fuel is not available. When transferring the registration of your vehicle to another country, state, province or district, it may be necessary to modify the vehicle to meet local laws and regulations. The laws and regulations for motor vehicle emis- sion control and safety standards vary according to the country, state, province or district; there- fore, vehicle specifications may differ. When any vehicle is to be taken into an- other country, state, province or district and registered, its modifications, transpor- tation and registration are the responsibil- ity of the user. NISSAN is not responsible for any inconvenience that may result.

9-12 Technical and consumer information

VEHICLE IDENTIFICATION

STI0095

STI0227

VEHICLE IDENTIFICATION NUMBER (VIN) PLATE The vehicle identification number plate is at- tached as shown. This number is the identifica- tion for your vehicle and is used in the vehicle registration.

VEHICLE IDENTIFICATION NUMBER (Chassis number)

墌 04.3.9/R50-D/V5 墍

STI0230

STI0096

STI0228

ENGINE SERIAL NUMBER The number is stamped on the engine as shown.

F.M.V.S.S. CERTIFICATION LABEL The Federal Motor Vehicle Safety Standard (F.M.V.S.S.) certification label is affixed as shown. This label contains valuable vehicle in- formation, such as: Gross Vehicle Weight Rat- ings (GVWR), Gross Axle Weight Rating (GAWR), month and year of manufacture, Ve- hicle Identification Number, (VIN), etc. Review it carefully.

EMISSION CONTROL INFORMATION LABEL The emission control tached as shown.

information label

is at-

Technical and consumer information 9-13

墌 04.3.9/R50-D/V5 墍

STI0370A

STI0229

TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label.

AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label tached as shown.

is at-

VEHICLE LOADING INFORMATION

WARNING

쐌 It is extremely dangerous to ride in a cargo area inside of a vehicle. In a collision, people riding in these areas are more likely to be seriously in- jured or killed.

쐌 Do not allow people to ride in any is not area of your vehicle that equipped with seats and seat belts. 쐌 Be sure everyone in your vehicle is in a seat and using a seat belt properly.

TERMS It is important to familiarize yourself with the following terms before loading your vehicle: 쐌 Curb Weight (actual weight of your vehicle) - vehicle weight including: standard and op- tional equipment, fluids, emergency tools, and spare tire assembly. This weight does not include passengers and cargo.

쐌 GVW (Gross Vehicle Weight) - curb weight plus the combined weight of passengers and cargo.

9-14 Technical and consumer information

墌 04.3.9/R50-D/V5 墍

쐌 GVWR (Gross Vehicle Weight Rating) - maximum total combined weight of the un- loaded vehicle, passengers, luggage, hitch, trailer tongue load and any other optional equipment. This information is located on the F.M.V.S.S⋅ label.

쐌 GAWR (Gross Axle Weight Rating) - maxi- mum weight (load) limit specified for the front or rear axle. This information is located on the F.M.V.S.S. label.

쐌 GCWR (Gross Combined Weight rating) - The maximum total weight rating of the ve- hicle, passengers, cargo, and trailer.

쐌 Vehicle Capacity Weight, Load limit, Total load capacity - maximum total weight limit specified of the load (passengers and cargo) for the vehicle. This is the maximum com- bined weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be included as part of the cargo load. This information is located on the Tire and Loading Information label.

쐌 Cargo capacity - permissible weight of cargo, the subtracted weight of occupants from the load limit.

VEHICLE LOAD CAPACITY Do not exceed the load limit of your vehicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Loading Information label. To get “the combined weight of occupants and cargo”, add the weight of all occupants, then add the total luggage weight to the value. Ex- amples are shown in the illustration.

STI0365

Steps for determining correct load limit (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kilograms or XXX pounds” on your vehicle’s placard.

(2) Determine the combined weight of the driver and passengers that will be riding in your vehicle.

(3) Subtract the combined weight of the driver and passengers from XXX kilograms or XXX pounds.

Technical and consumer information 9-15

墌 04.3.9/R50-D/V5 墍

if

(4) The resulting figure equals the available amount of cargo and luggage load capacity. For example, the “XXX” amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. [1,400 − 750 (5 x 150) = 650 lbs.] (5) Determine the combined weight of luggage and cargo being loaded on the vehicle. For safety, that weight must not exceed the avail- able cargo and luggage load capacity calcu- lated in Step 4.

(6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult to determine how this reduces the available cargo and luggage load capacity of your vehicle.

this manual

SPA0408A

SPA0365

SECURING THE LOAD There are tie down hooks located in the cargo area. The tie down hooks can be used to secure cargo with ropes or other types of straps. Do not apply a total load of more than 22
lbs. (10 kg) to a single hook when securing cargo.

9-16 Technical and consumer information

墌 04.3.9/R50-D/V5 墍

LOADING TIPS 쐌 The GVW must not exceed GVWR or GAWR as specified on the FMVSS Certifi- cation Label located on the driver’s door center pillar.

쐌 Do not load the front and rear axle to the

GAWR. Doing so will exceed the GVWR.

쐌 Loads should be spread out, and cargo should be properly secured. Large or heavy objects should be placed toward the front of the cargo area to help prevent sliding or shifting.

WARNING

쐌 Properly secure all cargo to help pre- vent it from sliding or shifting. Do not place cargo higher than the seat- backs. In a sudden stop or collision, unsecured cargo could cause per- sonal injury.

쐌 Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts on your vehicle can break, or it can change the way your vehicle handles.

This could result in loss of control and cause personal injury.

쐌 Overloading not only could shorten the life of your vehicle and the tires, but also could lead to hazardous ve- hicle handling and long braking dis- tance. This may cause a premature tire malfunction, which could result in a serious accident and personal in- jury. Malfunctions caused by over- loading are not covered by your NISSAN warranty.

VEHICLE LOAD CAPACITY The vehicle load capacity is the maximum total weight of passengers, optional equipment (air conditioning, trailer hitch, etc.) and cargo that your vehicle is designed to carry. Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR) for your vehicle. See “Vehicle loading information” earlier in this section for details.

Also check tires for proper inflation pressures.

Vehicle Load Weight Capacity Unit: lb (kg)

VQ35DE

2WD

4WD

Automatic and Manual Trans-

Automatic and Manual Trans-

mission

mission

XE, SE, LE

US

Canada

980 (445)

—

970 (440) 945 (430)

MEASUREMENT OF WEIGHTS Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weight the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certification label that is located on the driver’s door lock pillar. If weight ratings are exceeded, move or remove items to bring all weights below the ratings.

Technical and consumer information 9-17

墌 04.3.9/R50-D/V5 墍

TOWING A TRAILER

CAUTION

Overloading can shorten the life of your vehicle. Failures caused by overloading are not covered by your warranty.

the

specified in

following Towing value Load/Specification Chart. The total trailer load equals trailer weight plus its cargo weight. Towing loads greater than those specified or using improper towing equipment could ad- versely affect vehicle handling, braking and per- formance. The ability of your vehicle to tow a trailer is not only related to the maximum trailer loads, but also the places you plan to tow. Tow weights appropriate for level highway driving may have to be reduced on very steep grades or in low traction situations (for example, on slip- pery boat ramps).

CA0009

Your new vehicle was designed to be used primarily to carry passengers and cargo. Re- member that towing a trailer will place additional loads on your vehicle’s engine, drive train, steer- ing, braking and other systems. A Nissan Trailer Towing Guide (US only) is available from an authorized NISSAN dealer. This guide includes information on trailer towing ability and the special equipment required for proper towing. MAXIMUM LOAD LIMITS Maximum trailer loads Never allow the total trailer load to exceed the

9-18 Technical and consumer information

墌 04.3.9/R50-D/V5 墍

WARNING

Vehicle damage resulting from im- proper towing procedures is not cov- ered by NISSAN warranties. A NISSAN Trailer Towing Guide (U.S. only) contain- ing information on trailer towing ability and the special equipment required may be obtained from an authorized NISSAN dealer.

Tongue load Keep the tongue load between 9 to 11% of the total trailer load within the maximum tongue load following limits Towing Load/Specifications Chart. If the tongue load becomes excessive, rearrange cargo to allow for proper tongue load.

shown

the

in

CA0036

Maximum gross vehicle weight/ maximum gross axle weight The gross vehicle weight of the towing vehicle must not exceed the gross vehicle weight rating (GVWR) shown on the F.M.V.S.S. certification label. The gross vehicle weight equals the com- bined weight of the unloaded vehicle, passen- gers, luggage, hitch, trailer tongue load and any other optional equipment. In addition, front or rear gross axle weight must not exceed the gross axle weight rating (GAWR) shown on the F.M.V.S.S. certification label.

Technical and consumer information 9-19

墌 04.3.9/R50-D/V5 墍

TOWING LOAD/SPECIFICATION CHART

TOWING LOAD/SPECIFICATION CHART

Unit: lb (kg)

MODEL

PATHFINDER VQ35DE (6-Cyl.)

WEIGHT

MAXIMUM TRAILER WEIGHT*1
MAXIMUM TONGUE LOAD GROSS COMBINED WEIGHT RATING RECOMMENDED EQUIPMENT*2

M/T

3,500 (1,588)

350 (159)

8,000 (3,628)

A/T

5,000 (2,268)

500 (227)

9,500 (4,308)

TOWING SAFETY Trailer hitch Choose a proper hitch for your vehicle and trailer. A genuine NISSAN trailer hitch is avail- able from your NISSAN dealer (US only). Make sure the trailer hitch is securely attached to the vehicle, to help avoid personal injury or property damage due to sway caused by crosswinds, rough road surfaces or passing trucks.

Sway Control Device (SCD)

CAUTION

*1: All towing above 1,000 lb (454 kg) requires the use of trailer brakes. NISSAN recommends the use of

a tandem axle trailer whenever towing above 3,000 lb (1,361 kg).

*2: A sway control device is recommended for all towing above 2,000 lb (907 kg). Sway control devices are not offered by NISSAN. See a professional trailer/hitch outlet for a properly designed sway control device for your trailer.

쐌 Do not use axle-mounted hitches. 쐌 Do not modify the vehicle exhaust