2010 Nissan Murano Owners Manual

multi-function controller, and push the ENTER button.

There are different methods to input a phone number. Select one of the follow- ing options instead of “Transfer via Bluetooth” in step 4 above.

— Enter Data by Keypad

Input the name and phone number manually using the keypad displayed on the screen. (See “HOW TO USE TOUCH SCREEN (models with navigation system)” earlier in this section.)

— Copy from Downloaded Phonebook Copy a phonebook from the Bluetooth® cellular phone. The availability of this func- tion depends on each cellular phone. The copying procedure from the cellular phone also varies according to each cellular phone. See cellular phone Owner’s Manual for more details.

— Copy from Outgoing Call Logs

Store the name and phone number from the outgoing call list.

— Copy from Incoming Call Logs

SAA1575

SAA1576

4. Select the “Transfer via Bluetooth” key, and push the ENTER button in order to register your cellular phone memory in the phone- book.

5. Operate the cellular phone to send a person’s name and phone number from the memory of the cellular phone. The memory sending procedure from the cellular phone varies according to each cellular phone manufacturer. See the cellular phone Own- er’s Manual for more details.

it.

If you want

6. After the memory is registered in the phone- book, the system will ask if you want to add a voicetag for to add a voicetag, select the “YES” key on the “Add a voicetag?” screen. For example, the partner’s name is David, speak “David” after a tone. The “David” voicetag is stored in the phonebook. Voicetags allow easy dialing using the NISSAN Voice Recognition sys- tem. (See “NISSAN VOICE RECOGNITION SYSTEM (models with navigation system)” later in this section; page 4-99.)

if

7. When the phonebook registration is com- pleted, the screen will return to the name list of the phonebook.

Store the name and phone number from the Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-79

Model "Z51-D" EDITED: 2009/ 8/ 3

incoming call list.

— Delete

Delete a contact that is registered in the phonebook.

SAA1895

MAKING A CALL To make a call, follow the procedures below.

1. Push the PHONE button on the instrument panel or the button on the steering wheel. The “PHONE” screen will appear on the display.

2. Select the “Call (Phonebook)” key on the “PHONE” menu, and push the ENTER button.

3. Select the registered person’s name from the list, and push the ENTER button. Dialing will start and the screen will change to the call-in-progress screen.

4-80 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Black plate (248,1)

4. After the call

is over, perform one of the

following to finish the call.

a. Select the “Hang up” key and push the

ENTER button.

b. Push the

button on the steering

wheel.

c. Push the PHONE button on the instru-

ment panel.

There are different methods to make a call. Select one of the following options instead of “Call (Phonebook)” in step 2 above. . Redial

Dial the previously dialed number again.

. Call (Call Logs)

Select the name or phone number from the incoming or outgoing call logs.

. Call (Downloaded)

Select the name or phone number from the downloaded call list.

. Dial (Keypad)

Input the phone number manually using the keypad displayed on the screen. (See “HOW TO USE TOUCH SCREEN (models with navigation system)” earlier in this section.)

Model "Z51-D" EDITED: 2009/ 8/ 3

. Answer

Accept an incoming call to talk.

. On Hold

Put an incoming call on hold.

. Reject Call

Reject an incoming call.

To finish the call, perform one of following procedures listed below.

the

a) Select the “Hang up” key on the display and

push the ENTER button.

b) Push the PHONE button on the instrument

panel.

c) Push the

button on the steering wheel.

Black plate (249,1)

SAA1579

DURING A CALL There are some options available during a call. Select one of the following displayed on the screen if necessary. . Hang up

Finish the call. . Use Handset

Transfer the call to the cellular phone.

. Mute

Mute your voice to the person.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-81

Model "Z51-D" EDITED: 2009/ 8/ 3

SAA1578

RECEIVING A CALL When you hear a phone ring, the display will change to the incoming call mode. To receive a call, perform one of the following procedures listed below.

a) Select the “Answer” key on the display and

push the ENTER button.

b) Push the PHONE button on the instrument

panel.

c) Push the

button on the steering wheel.

There are some options available when receiving a call. Select one of the following displayed on the screen.

Black plate (250,1)

. Keypad

Send a dial network services such as voice mail.

tone to the caller for using

. Cancel Mute

This will appear after “Mute” is selected. Mute will be canceled.

To adjust the person’s voice to be louder or quieter, push the volume control switch (+ or −) on the steering wheel or turn the volume control knob on the instrument panel while talking on the phone. This adjustment is also available in the SETTING mode.

SAA1580

SAA1581

PHONE SETTING To set up the Bluetooth® Hands-Free Phone System to your preferred settings, push the SETTING button on the instrument panel and select the “PHONE” key on the display, and then push the ENTER button.

Phonebook See “PHONEBOOK REGISTRATION” earlier in this section for adding, editing and deleting a contact.

Downloaded Phonebook Refer to the following information for each item. . Download All

Download all of the contacts registered in the Bluetooth® cellular phone. Availability of this function depends on each cellular phone. The memory downloading procedure from the cellular phone also varies according to each cellular phone. See cellular phone Owner’s Manual for more details.

. Delete Downloaded Phonebook

Delete a downloaded phonebook.

4-82 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (251,1)

. Delete an Entry of Downloaded Phone-

. Pair Phone

. Remove Paired Phone

book

Delete an entry from the downloaded phonebook.

Automatic Hold If this item is turned on, an incoming call will be placed on hold automatically after several rings.

Use Vehicle Ringtone If this item is turned on, a specific ringtone that is different from the cellular phone’s will sound when receiving a call.

Delete Call Logs Delete all of the incoming or outgoing call logs from the list.

Bluetooth Setup See the following information for each item. . Bluetooth

If this setting is turned off, the connection between the cellular phone and the in- vehicle phone module will be canceled.

. Bluetooth Info

Check information about the device name, device PIN and connection status.

See “PAIRING PROCEDURE” later in this section.

Delete a registered cellular phone from the paired list.

. Priority Change

. Paired Phone List

Up to 5 registered cellular phones are shown on the list. If you select a cellular phone that is different from the one currently being connected, the newly selected phone will be connected to the system.

. Edit Phone Name

Rename the registered cellular phones using the keypad displayed on the screen. (See “HOW TO USE TOUCH SCREEN (models with navigation system)” earlier in this section.)

Use this command to change the priority level of the active phone.

The priority level determines which phone will be connected to the system when more than one paired Bluetooth® phone is in the vehicle.

The system states the priority level of the active phone and asks for a new priority level (1, 2, 3, 4, 5).

If the new priority level is already being used for another phone, the two phones will swap priority levels.

For example, if the current priority levels are: Priority Level 1 = Phone A Priority Level 2 = Phone B Priority Level 3 = Phone C and you change the priority level of Phone C to Level 1, then: Priority Level 1 = Phone C Priority Level 2 = Phone B Priority Level 3 = Phone A

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-83

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (252,1)

TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.

Symptom

Solution

System fails to interpret the command correctly.

The system consistently selects the wrong voicetag.

1. Ensure that the command is valid. (See “NISSAN VOICE RECOGNITION SYSTEM (models with navigation system)” later in this section; page 4-99.)

2. Ensure that the command is spoken after the tone.

3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle.

4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too noisy to use the phone, it is likely that the voice commands will not be recognized.

5. If more than one command was said at a time, try saying the commands separately.

1. Ensure that the voicetag requested matches what was originally stored. (See “PHONEBOOK REGISTRATION” earlier in this section.)

2. Replace one of the names being confused with a new name.

4-84 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2009/ 8/ 3

BLUETOOTH® HANDS-FREE PHONE SYSTEM WITHOUT NAVIGATION SYSTEM (if so equipped)

WARNING

. Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.

If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle before doing so.

CAUTION

To avoid draining the vehicle battery, use a phone after starting the engine.

Your NISSAN is equipped with Bluetooth® Hands-Free Phone System. If you are an owner of a compatible Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless tech- nology, you can make or receive a telephone call with your cellular phone in your pocket.

Once your cellular phone is paired to the in- vehicle phone module, no phone connecting

Black plate (253,1)

— Your vehicle is in an area where it

is difficult to receive radio waves; such as in a tunnel, in an underground parking garage, behind a tall building or in a mountainous area.

— Your cellular phone is locked in order not

to be dialed.

. When the radio wave condition is not ideal it may be to hear the other person’s voice

or ambient sound is too loud, difficult during a call.

Immediately after pushed to the ON position, impossible to receive a call period of time.

the ignition switch is it may be for a short

. Do not place the cellular phone in an area surrounded by metal or far away from the in- vehicle phone module to prevent tone quality degradation and wireless connection dis- ruption.

. While a cellular phone is connected through the the cellular phone may

the Bluetooth® wireless connection, battery power of discharge quicker than usual. If the Bluetooth® Hands-Free Phone System seems to be malfunctioning, please visit www.nissanusa.com/bluetooth for trouble- shooting help.

procedure is required anymore. Your phone is automatically connected with the in-vehicle phone module when the ignition switch is pushed to the ON position with the registered cellular phone turned on and carried in the vehicle. You can register up to 5 different Bluetooth® cellular phones in the in-vehicle phone module. However, you can talk on only one cellular phone at a time.

The NISSAN Voice Recognition system sup- ports the phone commands, so dialing a phone number using your voice is possible. Before using the Bluetooth® Hands-Free Phone System, refer to the following notes. . Set up the wireless connection between a compatible cellular phone and the in-vehicle phone module before using the Bluetooth® Hands-Free Phone System.

. Some Bluetooth® enabled cellular phones may not be recognized by the in-vehicle phone module. Please visit www.nissanusa.com/bluetooth for a recom- mended phone list.

. You will not be able to use a hands-free

phone under the following conditions:

— Your vehicle is outside of the telephone

service area.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-85

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (254,1)

. Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise.

. Refer to the cellular phone Owner’s Manual regarding the telephone pairing procedure specific to your phone, battery charging, cellular phone antenna, etc.

The antenna display on the monitor will not coincide with the antenna display of some cellular phones.

. Keep the interior of the vehicle as quiet as possible to hear the caller’s voice clearly as well as to minimize its echoes.

If reception between callers is unclear, adjusting the incoming or outgoing call volume may improve the clarity.

REGULATORY INFORMATION FCC Regulatory information — CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions.

— Operation is subject to the following two

conditions:

1)

2)

this device may not cause interference and

this device must accept any interference, including interference that may cause un- desired operation of the device

IC Regulatory information — Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

— This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations.

Bluetooth trademark:

BLUETOOTH® is a trademark owned by Bluetooth SIG, Inc., U.S.A.

INITIALIZATION When the ignition switch is pushed to the ON position, NISSAN Voice Recognition is initia- lized, which takes a few seconds. button is pushed before the initialization com- pletes, the system will announce “Hands-free phone system not ready” and will not react to voice commands.

If the

OPERATING TIPS To get the best performance out of the NISSAN Voice Recognition system, observe the follow- ing: . Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing voice commands correctly. . Wait until the tone sounds before speaking a command. Otherwise, the command will not be received properly.

. Start speaking a command within 5 seconds

after the tone sounds.

. Speak in a natural voice without pausing

between words.

GIVING VOICE COMMANDS To operate NISSAN Voice Recognition, push button located on the and release the steering wheel. After the tone sounds, speak a command.

The command given is picked up by the microphone, and voice feedback is given when the command is accepted.

If you need to hear the available commands for the current menu again, say “Help” and the system will repeat them.

4-86 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (255,1)

If a command is not recognized, the system announces, “Command not recognized. Please try again.” Repeat the command in a clear voice.

If you want to go back to the previous command, you can say “Go back” or “Correction” any time the system is waiting for a response.

. You can cancel a command when the system is waiting for a response by saying, “Cancel” or “Quit.” The system announces “Cancel” and ends the voice recognition (VR) session. You can also push the button on the steering wheel at any time. Whenever the VR session is canceled, a double beep is played to indicate you have exited the system.

If you want to adjust the volume of the voice feedback, push the volume control switches (+ or −) on the steering wheel while being provided with feedback. You can also use the radio volume control knob.

NOTE: The voice command “Help” is available at any time. Please say “Help” to obtain the information about how to use the NISSAN Voice Recognition system.

How to say numbers NISSAN Voice Recognition requires a certain way to speak numbers in voice commands. Refer to the rules and examples below. . Either “zero” or “oh” can be used for “0”.

The system repeats the numbers and prompts you to enter more.

—“six six two”

The system repeats the numbers and prompts you to enter more.

Example: 1-800-662-6200

—“six two zero zero”

—“One eight oh oh six six two six two oh

oh”, or

—“One eight zero zero six six two six two oh

oh”

. You can say “Star” for * and “Pound” for # at anytime in any position of the phone number. (Available only when using the “Call Inter- national” command.)

. Words can be used for the first 4 digits

Example: 1-555-1212 *123

—“One five five five one two one two star

one two three”

NOTE: For best results, say phone numbers as single digits.

places only.

Example: 1-800-662-6200

—“One eight hundred six six two six two oh

oh”,

—NOT “One eight hundred six six two sixty

two hundred, and

—NOT “One eight oh oh six six two sixty two

hundred.

. Numbers can be spoken in small groups. The system will prompt you to continuing entering digits, if desired.

Example: 1-800-662-6200

—“One eight zero zero”

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-87

Model "Z51-D" EDITED: 2009/ 8/ 3

PHONE END

Push the or end a call.

button to cancel a VR session

GETTING STARTED The following procedures will help you get started using the Bluetooth® Hands-Free Phone System with NISSAN Voice Recognition. For additional command options, see “LIST OF VOICE COMMANDS” later in this section.

CHOOSING A LANGUAGE You can interact with the Bluetooth® Hands-Free Phone System using English, Spanish or French.

See “HOW TO USE SETTING BUTTON” earlier in this section to change the language.

PAIRING PROCEDURE

SAA1858

CONTROL BUTTONS The control buttons for the Bluetooth® Hands- Free Phone System are located on the steering wheel.

TALK/PHONE SEND

Push the or answer an incoming call.

button to initiate a VR session

You can also use the button to skip through system feedback and to enter commands during a call. (See “LIST OF VOICE COMMANDS” later in this section and “DURING A CALL” earlier in this section for more information.)

4-88 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Black plate (256,1)

1. Push the

button on the steering wheel. The system announces the available com- mands.

2. Say: “Setup” *A . The system acknowl- edges the command and announces the next set of available commands.

3. Say: “Pair phone” *B . The system acknowl- edges the command and announces the next set of available commands.

4. Say: “New phone” *C . The system ac- knowledges the command and asks you to initiate pairing from the phone handset *D . When you are asked to enter a Pass Key for pairing your Bluetooth® cellular phone, operate it to enter the code “1234”.

The code is always “1234” regardless of the number of phones paired.

The pairing procedure of the cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual for details. You can also visit www.nissanusa.com/bluetooth for instruc- tions on pairing NISSAN recommended cellular phones.

5. The system asks you to say a name for the

phone *E . If the name is too long or too short, the

Model "Z51-D" EDITED: 2009/ 8/ 3

system tells you, then prompts you for a name again.

Also, if more than one phone is paired and the name sounds too much like a name already used, then prompts you for a name again.

the system tells you,

6. The system asks you to assign a priority level *F . The priority level determines which phone is active when more than one paired Bluetooth® phone is in the vehicle. Follow the instructions provided by the system or see “SETUP” later in this section for more information on changing priorities.

7. The system will ask if you would like to select a custom ringtone *G . Follow the instructions provided by the system or see “SETUP” later in this section for more information on selecting ringtones.

MAKING A CALL BY ENTERING A PHONE NUMBER

1. Push the

button on steering wheel. A

tone will sound.

Black plate (257,1)

RECEIVING A CALL When you hear the ringtone, press the button on the steering wheel.

Once the call has ended, press the on the steering wheel.

button

NOTE: If you do not wish to take the call when you button on hear the ringtone, press the the steering wheel to reject the call.

For additional command options, see “LIST OF VOICE COMMANDS” later in this section.

2. Say: “Call” *A . The system acknowledges the command and announces the next set of available commands.

International” *B

Say: “Call to dial more than 10 digits using any special characters.

it

recognition results,

3. Say the number you wish to call, starting with the area code in the single digit format *C . For better is recommended to say the numbers in small groups like, the 3-digits area code, the next 3 digits, then the last 4 digits. For example, 555-121-3354 can be said as “five five five” (1st group), “one two one” (2nd group) and “three three five four” (3rd group). (See “How to say numbers” earlier in this section for more information.)

4. When you have finished speaking the phone the system repeats it back and

number, announces the available commands.

5. Say: “Dial” *D . The system acknowledges

the command and makes the call.

For additional command options, see “LIST OF VOICE COMMANDS” later in this section.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-89

Model "Z51-D" EDITED: 2009/ 8/ 3

system will end the VR session. Whenever the VR session is canceled, a double beep is played to indicate you have exited the system.

If you want to go back to the previous command, you can say “Go back” or “Correction” anytime the system is waiting for a response.

When you get used to the menus in the system, you can talk ahead by saying more than one command at a time. For example, say, “Call five five five one two one two” or “Memo pad record.”

Also, when you get used to the system responses, you can skip ahead to the tone by button on the steering wheel. pressing the button when the However, if you press the system is waiting for a response from you it will end the VR session.

SAA1926

LIST OF VOICE COMMANDS When you push and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the commands in each sub-menu.

Remember to wait for the tone before speaking.

You can say “Help” to hear the list of commands currently available any time the system is waiting for a response.

If you want to end an action without completing it, you can say “Cancel” or “Quit” at any time while the system is waiting for a response. The

4-90 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Black plate (258,1)

SAA1927

CALL (speak name)

If you have stored entries in the Phone Book, you can dial a number associated with a name and location.

See “PHONE BOOK” later in this section to learn how to store entries.

When prompted by the system, say the name of the phone book entry (voicetag) you wish to call. The system acknowledges the name.

If there are multiple locations associated with the name, the system asks you to choose the location.

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (259,1)

numbers. The system then ends the VR session and returns to the call.

“Transfer Call” — Use the Transfer Call command to transfer from the Bluetooth® Hands-Free Phone System to the cellular phone when privacy is desired.

the call

The system announces, “Transfer call. Call transferred to privacy mode.” The system then ends the VR session.

You can also issue the Transfer Call command again to return to a hands-free call through the vehicle.

“Mute” — Use the Mute command to mute your voice so the other party cannot hear it. Use the mute command again to unmute your voice.

NOTE: If the other party ends the call or the cellular phone network connection is lost while the Mute feature is on, the Mute feature may need to be reset to “off.”

Once you have confirmed the name and location, the system begins the call.

and ends the VR session.

International

(speak digits)

When prompted by the system, say the number you wish to call. (See “How to say numbers” earlier in this section and “MAKING A CALL BY ENTERING A PHONE NUMBER” earlier in this section for more details.)

“Redial”

Use the Redial command to call the last number that was dialed within the vehicle.

NOTE: The system will not redial the last number dialed by the handset keypad.

The system acknowledges the command, re- peats the number and begins dialing.

If a redial number does not exist, the system announces, “There is no number to redial” and ends the VR session.

“Callback”

Use the Call Back command to dial the number of the last incoming call within the vehicle.

The system acknowledges the command, re- peats the number and begins dialing. If a call back number does not exist, the system announces, “There is no number to call back”

For dialing more than 10 digits or any special characters, please say “Call International”. When the system acknowledges the command, the system will prompt you to speak the number.

During a call

During a call there are several command options available. Press the button on the steering wheel to mute the receiving voice and enter commands.

“Help” — The system announces the avail- able commands.

“Go back/Correction” — The system an- nounces “Go back,” ends the VR session and returns to the call.

“Cancel/Quit” — The system announces “Cancel,” ends the VR session and returns to the call.

“Send/Enter/Call/Dial” — Use the Send command to enter numbers during a call. For example, if you were directed to dial an extension by an automated system:

Say: “Send one two three four.”

The system acknowledges the command and sends the tones associated with the

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-91

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (260,1)

When prompted by the system, say the name you would like to give the new entry (voicetag).

the cellular phone via the Bluetooth® commu- nication link.

For example, say: “Mary.”

If the name is too long or too short, the system tells you, then prompts you for a name again.

Also, if the name sounds too much like a name already stored, then prompts you for a name again.

the system tells you,

Once the system accepts the name and you confirm it the system asks for a location (Home, Office, Mobile or Other).

is correct,

SAA1928

For example, say: “Home.”

The system acknowledges the location.

The system will ask you to say a phone number or to transfer a phone number stored in the cellular phone’s memory.

To enter a phone number by voice command:

For example, say: “five five five one two one two.” (See “How to say numbers” earlier in this section for more information.)

The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s Manual for details. You can also visit www.nissanusa.com/bluetooth for instructions on transferring phone numbers from NISSAN recommended cellular phones.

The system repeats the number and prompts you for the next command. When you have finished entering numbers, choose “Store.”

The system confirms the name, location and number. The system then asks if you would like to store another location for the same name. If you do not wish to store another location, the system ends the VR session.

“Edit”

Use the Edit command to alter an existing phone book entry or to add a 2nd, 3rd or 4th phone number to an existing entry.

When prompted by the system, say the name of the entry you wish to edit.

To transfer a phone number stored in the cellular phone’s memory (if so equipped):

The system acknowledges the name and asks you for the location you would like to edit.

Say “Transfer entry.” The system acknowledges the command and asks you to initiate the transfer from the phone handset. The new contact phone number will be transferred from

Say the name of the location.

The system acknowledges the location.

PHONE BOOK The Phone Book stores up to 40 names for each phone paired with the system. Each name can have up to 4 locations/phone numbers asso- ciated with it.

NOTE: Each phone has its own separate phone book. You cannot access Phone A’s phone book if you are currently connected with Phone B.

“New Entry”

Use the New Entry command to store a new name in the system.

4-92 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (261,1)

You can stop the playback of the list at any time button on the steering by pressing the wheel. The system ends the VR session.

The system will ask you to say a phone number or to transfer a phone number stored in the cellular phone’s memory.

To enter a phone number by voice command:

For example, say: “five five five one two one two.” (See “How to say numbers” earlier in this section for more information.)

To transfer a phone number stored in the cellular phone’s memory (if so equipped):

Say “Transfer entry.” The system acknowledges the command and asks you to initiate the transfer from the phone handset. The new contact phone number will be transferred from the cellular phone via the Bluetooth® commu- nication link.

The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s Manual for details. You can also visit www.nissanusa.com/bluetooth for instructions on transferring phone numbers from NISSAN recommended cellular phones.

The system repeats the number and prompts you for the next command. When you have finished entering numbers, choose “Store.”

The system confirms the name, location and number, then announces that the entry has been stored. The system then ends the VR session.

“Delete”

Use the Delete command to erase one entry from the phone book, all entries from the phone book, the current redial number or the current call back number.

To delete entries from the phone book, say a name or “All entries” when prompted by the system.

The system acknowledges the command and asks you to confirm the deletion.

To delete the current redial number or call back number, say “redial number” or “call back number” when prompted by the system.

If a redial number or a call back number exists, the system deletes them without asking for confirmation.

If there is no number for the entry you are trying to delete, the system says so and ends the VR session.

“List Names”

Use the List Names command to hear all the names and locations in the phone book.

The system recites the phone book entries but does not include the actual phone numbers. When the playback of the list is complete the system ends the VR session.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-93

Model "Z51-D" EDITED: 2009/ 8/ 3

Speak the information you wish to record clearly. When you are done, press the button on the steering wheel.

or

A tone sounds and the system announces “Memo recorded.” Another tone sounds to end the VR session.

If the memo pad is full, the system asks if you wish to record over the oldest memo.

“Delete”

The Delete command erases all memos. The system asks you to confirm this action before deleting all memos.

SAA1929

MEMO PAD The Memo Pad records a maximum of 6 voice memos, each up to 20 seconds long.

“Play”

The system plays back all the memos in the order of newest to oldest. The system ends the VR session.

If there are no memos recorded, the system announces “No messages to play.” The system ends the VR session.

“Record”

The system announces “Recording” and a tone sounds signaling you to begin. 4-94 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Black plate (262,1)

SAA1930

SETUP Use the Setup command to change options associated with the Bluetooth® Hands-Free Phone System.

“Pair Phone”

Use the Pair Phone command to pair a phone to the Bluetooth® Hands-Free Phone System.

When you are asked to enter a PIN code for pairing your Bluetooth® cellular phone, operate it to enter the code “1234”.

The code is always “1234” regardless of the number of phones paired.

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (263,1)

Up to 5 phones can be paired. If you try to pair a the system announces that you sixth phone, must replace an existing phone.

first delete one phone or

If you try to pair a phone that has already been paired to your vehicle’s system, the system announces the name the phone is already using. The pairing procedure will then be canceled.

When prompted by the system, choose from the following commands:

“New phone” — see “PAIRING PROCE- DURE” earlier in this section.

“Replace phone” — The system announces the names of the phones already paired and asks which you would like to replace.

Once you say the name of the phone you wish to replace, the paring procedure will begin. (See “PAIRING PROCEDURE” ear- lier in this section.)

“List phone” — See the description below.

“List Phones”

Use the List Phone command to hear the names of the phones currently paired. If no phones are paired, the system announces, “No paired phones to list.” The system then ends the VR session.

“Select Phone”

For example, if the current priority levels are:

Use the Select Phone command to select a phone of lesser priority when two or more phones paired with Bluetooth® Hands-Free Phone System are in the vehicle at the same time.

The system asks you to name the phone and confirm the selection.

Once the selection is confirmed, the selected phone remains active until the ignition switch is pushed to the LOCK position or you select a new phone.

“Change Priority”

Use the Change Priority command to change the priority level of the active phone.

The priority level determines which phone is active when more than one paired Bluetooth® phone is in the vehicle.

Priority Level 1 = Phone A Priority Level 2 = Phone B Priority Level 3 = Phone C

and you change the priority level of Phone C to Level 1, then:

Priority Level 1 = Phone C Priority Level 2 = Phone B Priority Level 3 = Phone A

“Delete Phone”

Use the Delete Phone command to delete a specific phone or all phones from the Bluetooth® Hands-Free Phone System.

The system announces the names of the phones already paired with the system and their priority level. The system then gives you the option to delete a specific phone, all phones or listen to the list again.

The system states the priority level of the active phone and asks for a new priority level (1, 2, 3, 4, 5).

Once you choose to delete a phone or all phones, the system asks you to confirm this action.

If the new priority level is already being used for another phone, the two phones will swap priority levels.

NOTE: When you delete a phone, the associated phone book for that phone will also be deleted.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-95

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (264,1)

memory locations are in use, the system will ask the user to select which memory location should be overwritten.

9. When training is finished, the system will tell you an adequate number of phrases have been recorded.

“Select Ring tone”

Use the Select Ring tone command to select the tone heard in the vehicle when an incoming call is received.

The system announces the name of the active phone and asks you to choose from the following commands:

“Ringtone” — The system plays a ringtone and asks if you would like to select that tone. If you say no, the system plays the next ringtone available and continues to cycle through the ringtones until you select one or quit.

“Silent” — The system asks you to confirm your wish to disable the ringtone.

SPEAKER ADAPTATION (SA) MODE Speaker Adaptation allows up to two out-of dialect users to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different speaker adaptation model for memory A and memory B.

If memory A is available, the system will use memory A to store the model. If memory A is in use and memory B is available, the system will use memory B to store the model. If both of the

Training procedure The procedure for training a voice is as follows.

1. Position the vehicle in a reasonably quiet

outdoor location.

2. Sit

in the driver’s seat with the engine the parking brake on, and the

running, transmission in the P (Park) position.

3. Press and hold the

button for more

than 5 seconds.

4. The system announces: “Press the PHONE/ SEND ( the hands-free phone system to enter the speaker adapta- tion mode”.

) button for

5. Press the

button.

6. Voice memory A or memory B is selected automatically. If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions pro- vided by the system.

7. When preparation is complete and you are

ready to begin, the press the

button.

8. The SA mode will be explained. Follow the

instructions provided by the system.

4-96 Monitor, heater, air conditioner, audio, phone and voice recognition systems

10. The system will ask you to say your name. Follow the instructions to register your name.

11. The system will announce that speaker adaptation has been completed and the system is ready.

The SA mode will stop if:

The seconds in SA mode.

button is pressed for more than 5

The vehicle is driven during SA mode.

The ignition switch is pushed to the OFF or LOCK position.

Training phrases During the SA mode, the system instructs you to say the following phrases.

(The system will prompt you for each phrase.)

phone book new entry

dial three oh four two nine

delete call back number

setup pair phone

. memo pad play

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (265,1)

eight pause nine three two pause seven

delete all entries

call seven two four zero nine

four three pause two nine pause zero

delete redial number

phone book list names

phone book delete entry

call eight oh five four one

dial star two one seven oh

. memo pad record . Yes . No

select ringtone

. Bluetooth on

setup change priority

call three one nine oh two

nine seven pause pause three oh eight

. Cancel

call back number

. Correction

setup change ringtone

dial seven four oh one eight

setup main menu

. Delete . memo pad delete

call seven six three oh one

go back

call five six two eight zero

dial six six four three seven

dial eight five six nine two

dial nine seven two six six

call star two zero nine five

delete phone

dial eight three zero five one

. Home

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-97

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (266,1)

TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.

Symptom

Solution

1. Ensure that the command is valid. (See “LIST OF VOICE COMMANDS” earlier in this section.)

2. Ensure that the command is spoken after the tone.

3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle.

System fails to interpret the command correctly.

4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too noisy to use the phone, it is likely that the voice commands will not be recognized.

The system consistently selects the wrong entry (voicetag) from the phone book.

5. If more than one command was said at a time, try saying the commands separately.

6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to improve the recognition response for the speaker. (See “SPEAKER ADAPTATION (SA) MODE” earlier in this section.)

1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by using the “List Names” command. (See “PHONE BOOK” earlier in this section.)

2. Replace one of the names being confused with a new name.

4-98 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2009/ 8/ 3

NISSAN VOICE RECOGNITION SYSTEM (models with navigation system)

NISSAN Voice Recognition allows hands-free operation of the systems equipped on this vehicle in one of two modes, Standard Mode or Alternate Command Mode.

In Standard Mode, commands that are available are always shown on the display and announced by the system. You can complete your desired operation by simply following the prompts given by the system. (See “NISSAN VOICE RECOG- NITION STANDARD MODE” later in this section for details.) In this mode, hands-free operation of Audio, Air Conditioner and Display is not available through NISSAN Voice Recognition.

For advanced operation, you can use the Alternate Command Mode that enables the operation of the display, audio, and air condi- tioner through NISSAN Voice Recognition. (See “NISSAN VOICE RECOGNITION ALTERNATE COMMAND MODE” later in this section for details.) When this mode is active, an expanded list of commands can be spoken after pushing switch, and the voice command the TALK menu prompts are turned off. Note that in this mode the recognition success rate may be affected as the number of available commands and the ways of speaking each command are increased.

the Standard Mode is For U.S. customers, selected by default. For Canadian customers, the Alternate Command Mode is the default mode. To switch one mode to another, see each

mode description later in this section.

To improve the recognition success rate when Alternate Command Mode is active, try using the Speaker Adaptation Function available in that mode. Otherwise, is recommended that Alternate Command Mode be turned off and Standard Mode be used for the best recognition performance.

it

the voice commands for

For the navigation system, refer to the Navigation System Owner’s Manual of your vehicle.

NISSAN VOICE RECOGNITION STANDARD MODE The following section is applicable when the Standard Mode is activated. (This mode is selected by default for U.S. customers.)

The Standard Mode enables you to complete the desired operation by simply following the prompts that appear on the display and also are announced by the system. Hands-free operation of Audio, Air Conditioner and Display systems is not available in this mode.

Black plate (267,1)

SAA1566

Activating Standard Mode When the Alternate Command Mode is active, perform the following steps to switch to the Standard Mode.

1. Push the SETTING button on the instrument

panel.

2. Highlight the “Others” key on the display

and then push the ENTER button.

3. Highlight the “Voice Recognition” key and

then push the ENTER button.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-99

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (268,1)

Available items: . Getting Started

Describes the basics of how to operate the NISSAN Voice Recognition system.

. Placing Calls

Tutorial for making a phone call by voice command operation.

Finding a Street Address

Tutorial for entering a destination by street address.

4. Highlight the “Alternate Command Mode”

1. Push the INFO button on the instrument

key and push the ENTER button.

panel.

Displays useful tips of speaking for correct command recognition by the system.

SAA1917

SAA2164

. Help on Speaking

5. The indicator turns off and the Standard

Mode activates.

Displaying user guide If you use the NISSAN Voice Recognition system for the first time or you do not know how to operate it, you can display the User Guide for confirmation.

You can confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands.

2. Highlight the “Voice Recognition” key using the NISSAN controller and push the ENTER button.

3. Highlight the “User Guide” key using the NISSAN controller and push the ENTER button.

4. Highlight an item using the NISSAN con-

troller and push the ENTER button.

You can skip steps 1 and 2 above if you say “Help”.

4-100 Monitor, heater, air conditioner, audio, phone and voice recognition systems

. Voice Recognition Settings

Describes the available voice recognition settings.

the Command List

Note that feature is only available when Alternate Command Mode is active.

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (269,1)

Recognition.

SAA1904

Getting Started Before using the NISSAN Voice Recognition system for the first time, you can confirm how to use commands by viewing the Getting Started section of the User Guide.

1. Highlight “Getting Started” and push the

ENTER button.

2. You can confirm the page by scrolling the

screen using the NISSAN controller.

Tutorials on the operation of the NISSAN Voice Recognition system

If you choose “Finding a Street Address” or “Placing Calls”, you can view tutorials on how to perform these operations using NISSAN Voice

SAA2165

Useful tips for correct operation You can display useful speaking tips to help the system recognize your voice commands cor- rectly.

Highlight “Help on Speaking” and push the ENTER button.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-101

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (270,1)

switch is pushed commands. If the TALK before the initialization completes, the display will show the message: “Phonetic data down- loaded. Please wait.” or a beep sounds.

Before starting To get the best recognition performance from NISSAN Voice Recognition, observe the follow- ing:

The interior of the vehicle should be as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noise and vibration sounds, etc.), which may prevent the system from correctly recognizing the voice commands.

. Wait until the tone sounds before speaking a

command.

. Speak in a natural conversational voice

SAA1859

Giving voice commands 1. Push the TALK steering wheel.

switch located on the

SAA2166

Voice recognition settings The available settings of Recognition system are described.

the NISSAN Voice

1. Highlight “Voice Recognition Settings” and

without pausing between words.

If the air conditioner is set to “Auto”, the fan speed is automatically lowered so that your commands can be recognized more easily.

push the ENTER button.

2. You can confirm the page by scrolling the

screen using the NISSAN controller.

USING THE SYSTEM Initialization When the ignition switch is pushed to the ON position, NISSAN Voice Recognition is initia- lized, which takes a few seconds. When completed, the system is ready to accept voice

4-102 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (271,1)

shown on the display and spoken through voice menu prompts. Commands other than those that are displayed are not accepted. Please follow the prompts given by the system.

General rule

Only single digits 0 (zero) to 9 can be used. (For example, if you would like to say 500, “five zero zero” can be used, but “five hundred” cannot.)

the command is not

If the system announces, “Please say again”. Repeat the command in a clear voice.

recognized,

. Push the BACK button once to return to the

previous screen.

If you want to cancel the command, push switch. The and hold the TALK message, “Voice cancelled” will be an- nounced.

. Push the TALK

operation. Push the TALK to restart the operation.

switch to pause the switch again

to adjust

the volume of

If you want the system feedback, push the volume control buttons [+] or [−] on the steering switch or use the audio system volume knob while the system is making an announcement.

How to speak numbers:

NISSAN Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples.

Examples

1-800-662-6200

— “One eight zero zero six six two six two

zero zero”

Improving Recognition of Phone numbers

You can improve the recognition of phone numbers by saying the phone number in three groups of numbers. For example, when you try to call 800-662-6200, say “eight zero zero” first, and the system will then ask you for the next three digits. Then, say “six six two”. After recognition, the system will then ask for the last four digits. Say, “six two zero zero”. Using this method of phone digit entry can improve recognition performance.

When speaking a house number, speak the If the letter “o (Oh)” is number “0” as “zero”. included in the house number, it will not be recognized as the number “0 (zero)” even if you speak “oh” instead of “zero”. You can only say “zero” for “0 (zero)”.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-103

Model "Z51-D" EDITED: 2009/ 8/ 3

SAA1908

2. A list of commands appears on the screen, and the system announces, “Would you like to access Phone, Navigation, Information or Help?”.

3. After the tone sounds and the icon on the , speak a

to

screen changes from command.

4. Continue to follow the voice menu prompts and speak after the tone sounds until your desired operation is completed.

Operating tips: . Say a command after the tone. . Commands that are available are always

Black plate (272,1)

Command List

Category Command:

Command

Phone

Navigation

Information

Help

. Phone Command:

Command

Dial Number

Redial

Phonebook

International Call

Change Number

. Navigation Command:

Action

Operates Phone function

Operates Navigation function

Displays vehicle Information function

Displays User Guide

Action

Makes a call to a spoken phone number up to 10 digits.

Makes a call to the latest dialed number.

Makes a call to a contact that is stored in the Phonebook.

Makes an international call by allowing more than 10 digits to be spoken.

Corrects the phone number when it is not recognized. (Available during phone number entry)

See the separate Navigation System Owner’s Manual. Information Command:

Command

Fuel Economy

Maintenance

Traffic Info.

Action

Displays fuel economy information.

Displays maintenance information.

Turns the traffic information system ON and OFF.

4-104 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (273,1)

Voice command examples To use the NISSAN Voice Recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations by voice commands are described here.

For navigation system commands, see the separate Navigation System Owner’s Manual.

SAA1859

SAA1908

Example 1 - Placing a call to the phone number 800-662-6200:

2. The system announces, “Would you like to Information or

access Phone, Navigation, Help?”

1. Push the TALK steering wheel.

switch located on the

3. Speak “Phone”.

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-105

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (274,1)

SAA1909

SAA1910

SAA1911

4. Speak “Dial Number”.

5. Speak “8 0 0”.

6. The system announces, “Please say the next three digits or dial, or say change number.”

7. Speak “6 6 2”.

4-106 Monitor, heater, air conditioner, audio, phone and voice recognition systems

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (275,1)

. You can only say a phone number using the 3-3-4 grouping, 7 digits, and 10 digits using this command. Please use the “International Call” command for all other formats.

If you say “Change Number” during phone number entry, the system will automatically request that you repeat the number using the 3-3-4 format. In this case please say the area code first and then follow the prompts. . Do not add a “1” in front of the area code

when speaking phone numbers.

SAA1912

SAA1913

8. The system announces, “Please say the last

10. The system announces, “Dial or Change

four digits” or say change number.

Number?”

9. Speak “6 2 0 0”.

11. Speak “Dial”.

the system does not

If recognize your command, please try repeating the com- mand using a natural voice. Speaking too slow or too loudly may further decrease recognition performance.

12. The system makes a call to 800-662-6200.

Note: . You can also speak “800-662-6200” (10
continuous digits) or “662-6200” (7 con- tinuous digits), the area code is not necessary. However, the 3-3-4 digit group- ing is recommended for improved recogni- tion. (See “How to speak numbers” earlier in this section.)

if

Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-107

Model "Z51-D" EDITED: 2009/ 8/ 3

Black plate (276,1)

SAA1859

SAA1908

SAA1909

Example 2 - Placing an international call to the phone number 011-81-111-222-3333:

2. The system announces, “Would you like to Information or

access Phone, Navigation, Help?”

1. Push the TALK steering wheel.

switch located on the

3. Speak “Phone”.