2013 Mercedes-benz M Class Owners Manual

BA: 9.0 J x 20 H2
Wheel offset: 2.24 in (57 mm) BA: 9.0 J x 20 H2
Wheel offset: 2.24 in (57 mm)

3 MOExtended tires (tires featuring run-flat characteristics) only in combination with an activated tire pressure

loss warning system or tire pressure monitor.

4 Use of snow chains not permitted. Observe the notes under "Snow chains".

432 Wheel and tire combinations

Winter tires R 18
Tires BA: 255/55 R 18 105 H M+Si

R 19
Tires BA: 225/50 R 19 103 W

BA: 225/50 R 19 103 W MOExtended3

BA: 255/50 R 19 107 H XL M+Si

BA: 255/50 R 19 107 H XL M+SiMOExtended3

BA: 255/50 R 19 107 H XL M+Si4

BA: 255/50 R 19 107 H XL M+SiMOExtended3, 4

ML 350 BlueTEC 4MATIC All-weather tires R 18
Tires BA: 255/55 R 18 105 H M+S

Alloy wheels BA: 8.0 J x 18 H2
Wheel offset: 2.21 in (56 mm)

Alloy wheels BA: 8,5 J x 19 H2 Wheel offset: 2,44 in (62 mm) BA: 8,5 J x 19 H2 Wheel offset: 2,44 in (62 mm) BA: 8.0 J x 19 H2
Wheel offset: 2.21 in (56 mm) BA: 8.0 J x 19 H2
Wheel offset: 2.21 in (56 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.32 in (59 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.32 in (59 mm)

Alloy wheels BA: 8.0 J x 18 H2
Wheel offset: 2.21 in (56 mm)

3 MOExtended tires (tires featuring run-flat characteristics) only in combination with an activated tire pressure

loss warning system or tire pressure monitor.

4 Use of snow chains not permitted. Observe the notes under "Snow chains".

Wheel and tire combinations

433

R 19
Tires BA: 225/50 R 19 103 W

BA: 225/50 R 19 103 W MOExtended3

BA: 255/50 R 19 107 H XL M+S

BA: 255/50 R 19 107 H XL M+SMOExtended3

BA: 255/50 R 19 107 H XL M+S4

BA: 255/50 R 19 107 H XL M+SMOExtended3, 4

BA: 255/50 R 19 107 H XL M+S4

BA: 255/50 R 19 107 H XL M+SMOExtended3, 4

R 20
Tires BA: 265/45 R 20 108 H XL M+S4

BA: 265/45 R 20 108 H XL M+SMOExtended3, 4

Winter tires R 18
Tires BA: 255/55 R 18 105 H M+Si

Alloy wheels BA: 8,5 J x 19 H2 Wheel offset: 2,44 in (62 mm) BA: 8,5 J x 19 H2 Wheel offset: 2,44 in (62 mm) BA: 8.0 J x 19 H2
Wheel offset: 2.21 in (56 mm) BA: 8.0 J x 19 H2
Wheel offset: 2.21 in (56 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.32 in (59 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.32 in (59 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.44 in (62 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.44 in (62 mm)

Alloy wheels BA: 9.0 J x 20 H2
Wheel offset: 2.24 in (57 mm) BA: 9.0 J x 20 H2
Wheel offset: 2.24 in (57 mm)

Alloy wheels BA: 8.0 J x 18 H2
Wheel offset: 2.21 in (56 mm)

3 MOExtended tires (tires featuring run-flat characteristics) only in combination with an activated tire pressure

loss warning system or tire pressure monitor.

4 Use of snow chains not permitted. Observe the notes under "Snow chains".

434 Wheel and tire combinations

R 19
Tires BA: 225/50 R 19 103 W

BA: 225/50 R 19 103 W MOExtended3

BA: 255/50 R 19 107 H XL M+Si

BA: 255/50 R 19 107 H XL M+SiMOExtended3

BA: 255/50 R 19 107 H XL M+Si4

BA: 255/50 R 19 107 H XL M+SiMOExtended3, 4

ML 550 4MATIC BlueEFFICIENCY All-weather tires R 19
Tires BA: 225/50 R 19 103 W

BA: 225/50 R 19 103 W MOExtended3

BA: 255/50 R 19 107 H XL M+S

BA: 255/50 R 19 107 H XL M+SMOExtended3

BA: 255/50 R 19 107 H XL M+S4

BA: 255/50 R 19 107 H XL M+SMOExtended3, 4

Alloy wheels BA: 8,5 J x 19 H2 Wheel offset: 2,44 in (62 mm) BA: 8,5 J x 19 H2 Wheel offset: 2,44 in (62 mm) BA: 8.0 J x 19 H2
Wheel offset: 2.21 in (56 mm) BA: 8.0 J x 19 H2
Wheel offset: 2.21 in (56 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.32 in (59 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.32 in (59 mm)

Alloy wheels BA: 8,5 J x 19 H2 Wheel offset: 2,44 in (62 mm) BA: 8,5 J x 19 H2 Wheel offset: 2,44 in (62 mm) BA: 8.0 J x 19 H2
Wheel offset: 2.21 in (56 mm) BA: 8.0 J x 19 H2
Wheel offset: 2.21 in (56 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.32 in (59 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.32 in (59 mm)

3 MOExtended tires (tires featuring run-flat characteristics) only in combination with an activated tire pressure

loss warning system or tire pressure monitor.

4 Use of snow chains not permitted. Observe the notes under "Snow chains".

Wheel and tire combinations

435

Tires BA: 255/50 R 19 107 H XL M+S4

BA: 255/50 R 19 107 H XL M+SMOExtended3, 4

R 20
Tires BA: 265/45 R 20 108 H XL M+S4

BA: 265/45 R 20 108 H XL M+SMOExtended3, 4

Winter tires R 19
Tires BA: 225/50 R 19 103 W

BA: 225/50 R 19 103 W MOExtended3

BA: 255/50 R 19 107 H XL M+Si

BA: 255/50 R 19 107 H XL M+SiMOExtended3

BA: 255/50 R 19 107 H XL M+Si4

BA: 255/50 R 19 107 H XL M+SiMOExtended3, 4

Alloy wheels BA: 8.5 J x 19 H2
Wheel offset: 2.44 in (62 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.44 in (62 mm)

Alloy wheels BA: 9.0 J x 20 H2
Wheel offset: 2.24 in (57 mm) BA: 9.0 J x 20 H2
Wheel offset: 2.24 in (57 mm)

Alloy wheels BA: 8,5 J x 19 H2 Wheel offset: 2,44 in (62 mm) BA: 8,5 J x 19 H2 Wheel offset: 2,44 in (62 mm) BA: 8.0 J x 19 H2
Wheel offset: 2.21 in (56 mm) BA: 8.0 J x 19 H2
Wheel offset: 2.21 in (56 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.32 in (59 mm) BA: 8.5 J x 19 H2
Wheel offset: 2.32 in (59 mm)

4 Use of snow chains not permitted. Observe the notes under "Snow chains". 3 MOExtended tires (tires featuring run-flat characteristics) only in combination with an activated tire pressure

loss warning system or tire pressure monitor.

436 Emergency spare wheel

ML 63 AMG 4MATIC Summer tires R 20
Tires BA: 265/45 ZR 20 108 Y XL4

R 21
Tires BA: 295/35 ZR 21 107 Y XL4

Winter tires R 20
Tires BA: 255/45 R 20 105 V XL M+Si

R 21
Tires BA: 295/35 R 21 107 V XL M+Si4

Alloy wheels BA: 9.0 J x 20 H2
Wheel offset: 1.61 in (41 mm)

Alloy wheels BA: 10.0 J x 21 H2
Wheel offset: 2.21 in (56 mm)

Alloy wheels BA: 9.0 J x 20 H2
Wheel offset: 1.61 in (41 mm)

Alloy wheels BA: 10.0 J x 21 H2
Wheel offset: 2.21 in (56 mm)

Emergency spare wheel Important safety notes G WARNING The wheel or tire size as well as the tire type of the spare wheel or emergency spare wheel and the wheel to be replaced may differ. Mounting an emergency spare wheel may severely impair the driving characteristics. There is a risk of an accident.

To avoid hazardous situations: Radapt your driving style accordingly and

drive carefully.

Rnever mount more than one spare wheel or emergency spare wheel that differs in size. Ronly use a spare wheel or emergency spare

wheel of a different size briefly.

Rdo not switch ESP® off. Rhave a spare wheel or emergency spare wheel of a different size replaced at the nearest qualified specialist workshop. Observe that the wheel and tire dimensions as well as the tire type must be correct.

4 Use of snow chains not permitted. Observe the notes under "Snow chains".

! AMG vehicles with "Minispare" emergency spare wheel: use the "Minispare" emergency spare wheel only on the rear axle. If you mount the "Minispare" emergency spare wheel on the front axle, this could result in damage to the brake system. If a tire on the front axle is defective, an intact wheel from the rear axle must first be replaced with the "Minispare" emergency spare wheel. The defective wheel on the front axle can then be replaced with the intact wheel from the rear axle. Make sure to note the placard on the "Minispare" emergency spare wheel.

When using an emergency spare wheel or spare wheel of a different size, you must not exceed the maximum speed of 50 mph (80 km/h). Snow chains must not be mounted on emergency spare wheels.

General notes Mounting the emergency spare wheel is described under "Mounting a wheel" (Y page 422). You should regularly check the pressure of the emergency spare wheel, particularly prior to long trips, and correct the pressure as necessary (Y page 402). The applicable value can be found on the wheel or under "Technical data" (Y page 439). An emergency spare wheel may also be mounted against the direction of rotation. Observe the time restriction on use as well as the speed limitation specified on the emergency spare wheel. Replace the tires after six years at the latest, regardless of wear. This also applies to the emergency spare wheel.

Emergency spare wheel

437

Removing the emergency spare wheel

Emergency spare wheel (example: vehicle without lockable cargo compartment floor) : "Minispare" emergency spare wheel ; Emergency spare wheel retainer The "Minispare" emergency spare wheel can be found in the stowage well under the cargo compartment floor. X Lift the cargo compartment floor up

(Y page 342).

X Vehicles with trailer tow hitch: remove

the ball coupling stowage tray (Y page 255).

X Vehicles without a lockable cargo compartment floor: turn emergency spare wheel retainer ; counter-clockwise and remove it.

X Remove "Minispare" emergency spare

wheel :.

Vehicles with a lockable cargo compartment floor : "Minispare" emergency spare wheel ; Stowage well

438 Emergency spare wheel

X Vehicles with a lockable cargo

compartment floor: remove the contents of stowage tray ;.

X Turn the central retaining screw of stowage tray ; and "Minispare" emergency spare wheel : counter-clockwise and remove it.

X Remove stowage well ;. X Remove "Minispare" emergency spare

wheel :.

X Hook retaining spring hooks : and = on tensioning straps ; in the cargo tie-down rings.

X Tighten tensioning straps ; on both sides. For further information on changing and mounting a wheel, see (Y page 422).

In vehicles with a Bang & Olufsen sound system, the "Minispare" emergency spare wheel is stored in a bag. The bag is secured to the cargo tie-down rings in the cargo compartment. X To remove the emergency spare

wheel: open the tailgate.

X Loosen tensioning straps ; on both sides. X Unhook retaining spring hooks : and = on tensioning straps ; from the cargo tie- down rings.

X Remove the bag with the "Minispare"

emergency spare wheel.

X Open the bag and remove the "Minispare"

emergency spare wheel.

X To stow the emergency spare wheel: place the "Minispare" emergency spare wheel in the bag and close the bag.

X Lay the bag with the "Minispare"

emergency spare wheel in the cargo compartment, with the carrying strap to the rear.

Technical data ML 350 BlueEFFICIENCY "Minispare" emergency spare wheel Tires T 155/90 R18 113 M Tire pressure: 420 kPa (4.2 bar/61 psi)

ML 350 4MATIC BlueEFFICIENCY "Minispare" emergency spare wheel Tires T 155/90 R18 113 M Tire pressure: 420 kPa (4.2 bar/61 psi)

ML 350 BlueTEC 4MATIC "Minispare" emergency spare wheel Tires T 155/90 R18 113 M Tire pressure: 420 kPa (4.2 bar/61 psi)

ML 550 4MATIC BlueEFFICIENCY "Minispare" emergency spare wheel Tires T 155/80 R19 114 M Tire pressure: 420 kPa (4.2 bar/61 psi)

ML 63 AMG "Minispare" emergency spare wheel Tires T 155/80 R19 114 M Tire pressure: 420 kPa (4.2 bar/61 psi)

Emergency spare wheel

439

Alloy wheels 4.0 B x 18 H2
Wheel offset: 1.58 in (40 mm)

Alloy wheels 4.0 B x 18 H2
Wheel offset: 1.58 in (40 mm)

Alloy wheels 4.0 B x 18 H2
Wheel offset: 1.58 in (40 mm)

Alloy wheels 4.5 B x 19 H2
Wheel offset: 1.58 in (40 mm)

Alloy wheels 4.5 B x 19 H2
Wheel offset: 1.58 in (40 mm)

440

Useful information ............................ 442
Information regarding technical data .................................................... 442
Genuine Mercedes-Benz parts ......... 442
Warranty ............................................ 442
Identification plates ......................... 443
Service products and filling capaci- ties ..................................................... 444
Vehicle data ...................................... 452
Trailer tow hitch ................................ 454

441

442 Warranty

Useful information

i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- related systems and functions.

i Read the information on qualified specialist workshops: (Y page 27).

Information regarding technical data

i The data stated here specifically refers to a vehicle with standard equipment. Consult an authorized Mercedes-Benz Center for the data for all vehicle variants and trim levels.

Genuine Mercedes-Benz parts

G WARNING Driving safety may be impaired if non- approved parts, tires and wheels or safety- relevant accessories are used. This could lead to malfunctions in safety- relevant systems, e.g. the brake system. This could cause you to lose control of your vehicle and cause an accident. For this reason, Mercedes-Benz recommends that you use genuine Mercedes-Benz parts or parts of equal quality. Only use tires, wheels and accessories that have been specifically approved for your vehicle. H Environmental note Daimler AG also supplies reconditioned major assemblies and parts which are of the same quality as new parts. They are covered by the same Limited Warranty entitlements as new parts.

! Air bags and Emergency Tensioning Devices, as well as control units and sensors for these restraint systems, may be installed in the following areas of your vehicle: Rdoors Rdoor pillars Rdoor sills Rseats Rcockpit Rinstrument cluster Rcenter console Do not install accessories such as audio systems in these areas. Do not carry out repairs or welding. You could impair the operating efficiency of the restraint systems. Have aftermarket accessories installed at a qualified specialist workshop.

Genuine Mercedes-Benz parts are subject to strict quality control. Each part has been specially developed, manufactured or selected for Mercedes-Benz vehicles and fine-tuned for them. Only genuine Mercedes- Benz parts should therefore be used. More than 300,000 different genuine Mercedes-Benz parts are available for Mercedes-Benz models. All authorized Mercedes-Benz Centers maintain a supply of genuine Mercedes-Benz parts for necessary service and repair work. In addition, strategically located parts delivery centers provide quick and reliable parts service. Always specify the vehicle identification number (VIN) (Y page 443) and the engine number (Y page 444) when ordering genuine Mercedes-Benz parts.

Warranty

Your vehicle is covered under the terms of the warranties printed in the Service and Warranty Information booklet.

Identification plates

443

Example: vehicle identification plate (USA only) ; Paint code = VIN

Example: vehicle identification plate (Canada only) ; Paint code = VIN i The data shown on the vehicle

identification plate is used only as an example. This data is different for every vehicle and can deviate from the data shown here. You can find the data applicable to your vehicle on the vehicle's identification plate.

Your authorized Mercedes-Benz Center will replace and repair all factory-installed parts in accordance with the following warranty terms and conditions: RNew Vehicle Limited Warranty REmission Systems Warranty REmission Performance Warranty RCalifornia, Connecticut, Maine,

Massachusetts, New York, Pennsylvania, Rhode Island and Vermont Emission Control System Warranty

RState warranty enforcement laws (Lemon

Laws)

Replacement parts and accessories are covered by the Mercedes-Benz Parts and Accessories warranties. These are available at any authorized Mercedes-Benz Center. i If you lose the Service and Warranty

Information booklet, contact an authorized Mercedes-Benz Center to arrange a replacement. It will be mailed to you.

Identification plates Vehicle identification plate with vehicle identification number (VIN)

X Open the driver's door.

You will see vehicle identification plate :.

444 Service products and filling capacities

VIN

X Open the front right-hand door. X Open cover : in the direction of the arrow

and remove it. You will see the VIN.

The VIN can also be found in the following locations: Ron the lower edge of the windshield

Ron the vehicle identification plate

(Y page 444)

(Y page 443)

Engine number

: Emission control information plate,

including the certification of both federal and Californian emissions standards

; Engine number (stamped into the

crankcase)

= VIN (on the lower edge of the windshield)

Service products and filling capacities Important safety notes G WARNING Service products may be poisonous and hazardous to health. There is a risk of injury. Comply with instructions on the use, storage and disposal of service products on the labels of the respective original containers. Always store service products sealed in their original containers. Always keep service products out of the reach of children. H Environmental note Dispose of service products in an environmentally responsible manner.

Service products include the following: Rfuels (e.g. gasoline, diesel) Rexhaust gas aftertreatment additives, e.g.

DEF

Rlubricants (e.g. engine oil, transmission oil) Rcoolant Rbrake fluid Rwindshield washer fluid Rclimate control system refrigerant Comply with all valid regulations with respect to handling, storing, and disposing of service fluids. Components and service products must be matched. You should therefore only use products that have been tested and approved by Mercedes-Benz. Information on tested and approved products can be obtained at an authorized Mercedes- Benz Center or on the Internet at http://bevo.mercedes-benz.com. You can recognize service products approved by Mercedes-Benz by the following inscription on the containers: RMB-Freigabe (e.g. MB-Freigabe 229.51) RMB Approval (e.g. MB Approval 229.51)

Service products and filling capacities

445

Other designations or recommendations indicate a level of quality or a specification in accordance with an MB Sheet number (e.g. MB 229.5). They have not necessarily been approved by Mercedes-Benz.

Tank capacity

Model

All models

Total

capacity 24.6 US gal

(93.0 l)

Fuel Important safety notes G WARNING Fuel is highly flammable. If you handle fuel incorrectly, there is a risk of fire and explosion. You must avoid fire, open flames, creating sparks and smoking. Switch off the engine and, if applicable, the auxiliary heating before refueling. G WARNING Fuel is poisonous and hazardous to health. There is a risk of injury. You must make sure that fuel does not come into contact with your skin, eyes or clothing and that it is not swallowed. Do not inhale fuel vapors. Keep fuel away from children. If you or others come into contact with fuel, observe the following: RWash away fuel from skin immediately

using soap and water.

RIf fuel comes into contact with your eyes, immediately rinse them thoroughly with clean water. Seek medical assistance without delay.

RIf fuel is swallowed, seek medical

assistance without delay. Do not induce vomiting.

RImmediately change out of clothing which

has come into contact with fuel.

Model

All models

ML 63 AMG

Of which reserve Approx. 3.2 US gal (12.0 l) Approx. 3.7 US gal (14.0 l)

Gasoline Fuel grade ! Do not use diesel to refuel vehicles with a

gasoline engine. Do not switch on the ignition if you accidentally refuel with the wrong fuel. Otherwise, the fuel will enter the fuel system. Even small amounts of the wrong fuel could result in damage to the fuel system and the engine. The repair costs are high. Notify a qualified specialist workshop and have the fuel tank and fuel lines drained completely.

! You should only refuel with unleaded premium-grade gasoline as this avoids damaging the catalytic converter. If engine running problems are apparent, have the cause checked immediately and repaired. Excess unburned fuel can otherwise enter the catalytic converter, leading to overheating and possibly causing a fire.

! To ensure the longevity and full

performance of the engine, only premium- grade unleaded gasoline may be used.

446 Service products and filling capacities

If there is no premium-grade unleaded gasoline available and regular unleaded gasoline must be used, please observe the following precautions: Ronly fill the fuel tank to half full with

regular unleaded gasoline and fill the rest with premium-grade unleaded gasoline as soon as possible.

Rdo not drive at the maximum speed. Ravoid sudden acceleration. Rif the vehicle is carrying a light load, e.g. two passengers without luggage, do not allow the engine to rev above 3000 rpm.

Rif the vehicle is fully loaded or is being

operated in mountainous terrain, do not depress the accelerator pedal further than Ô of the pedal travel.

Only refuel using premium-grade unleaded gasoline with a minimum octane rating of 91. Reformulated Gasoline (RFG) and/or unleaded gasoline with additives can be used. The concentration of additives in the fuel, however, must not exceed 10%, e.g.: REthanol RTAME RETBE RIPA RTBA For MTBE, the concentration should not exceed 15%. The concentration of methanol in gasoline, including other additives, must not exceed 3%. Using mixtures of methanol and ethanol is not permitted. Gasohol, a mixture of 10% ethanol and 90% unleaded gasoline, may be used. All of these blends must fulfill the fuel requirements, e.g.: Rknock resistance Rboiling point Rvapor pressure You will usually find information about the fuel grade on the pump. If you cannot find the

label on the pump, ask the staff for assistance. i For further information, consult a

qualified specialist workshop or on the Internet at http://www.mbusa.com (USA only).

Information on refueling (Y page 174). Additives ! Operating the engine with fuel additives

can increase wear and tear to the fuel system high-pressure pump and lead to contamination of the entire fuel system. The repair costs are high. This does not include additives for the removal and prevention of residue buildup. gasoline must only be mixed with additives recommended by Mercedes-Benz. More information about recommended additives can be obtained from any authorized Mercedes-Benz Center.

One of the main problems of poor fuel quality is the forming of deposits that are created during the gasoline combustion process. Mercedes-Benz recommends that you use branded fuels that have additives. If you use fuels without these additives over a longer period of time, carbon deposits may build up. These deposits form at the inlet valves and in the combustion chamber in particular. This could lead to engine problems, e.g.: Rlonger engine warm-up phase Runeven idle Rengine noise Rmisfiring Rloss of power Carbon deposits may form if the availability of gasoline with relevant additives is insufficient (in certain regions). In this case, Mercedes-Benz recommends additives approved for use in Mercedes-Benz vehicles; see http://bevo.mercedes-benz.com. For a list of approved products, consult an authorized Mercedes-Benz Center. Comply

Service products and filling capacities

447

with the instructions for use on the product label. Do not mix other fuel additives with fuel. This causes unnecessary costs and could damage the engine.

Diesel Fuel grade G WARNING If you mix diesel fuel with gasoline, the flash point is lower than that of pure diesel fuel. When the engine is running, exhaust system components could overheat without being noticed. There is a risk of fire. Never refuel with gasoline. Never mix gasoline with diesel fuel.

! Only use commercially available vehicular ULTRA-LOW SULFUR DIESEL FUEL (ULSD, 15 ppm maximum sulfur content) that meets the ASTM D975 standard. If you do not refuel with ULSD, you may damage the BlueTEC exhaust gas aftertreatment system of the vehicle.

! Do not use gasoline to refuel vehicles with a diesel engine. Do not mix diesel fuel with gasoline, kerosene or paraffin. This may otherwise result in damage to the fuel system and engine.

You will usually find information about the fuel grade on the pump. If you cannot find the label on the pump, ask the staff for assistance. i For further information, consult a

qualified specialist workshop or on the Internet at http://www.mbusa.com (USA only).

Information on refueling (Y page 174). Bio-diesel - FAME (fatty acid methyl ester) Mercedes-Benz USA approves the use of bio- diesel B5 for all BlueTEC diesel engines. The concentration of bio-diesel in the ULSD may not exceed 5% by volume.

Pure bio-diesel and diesel fuel with a higher percentage of bio-diesel, such as B20, can damage the engine and the fuel system. For this reason, they are not approved. For more information, consult the gas station staff. The bio-diesel B5 label on the gasoline pump must clearly state that the standard for ULSD has been fulfilled. If the label is not clear, do not refuel the vehicle. Do not refuel your vehicle with fuels unless they have been approved by Mercedes-Benz. Information on refueling (Y page 174). Low outside temperatures i Diesel fuel with improved cold flow

properties is available during the winter months. Further information about fuel properties can be obtained from oil companies, e.g. at gas stations.

Flow improver To improve the low-temperature resistance of diesel fuel, a flow improver can be attached. The effectiveness of a flow improver is not guaranteed for every fuel. Only use flow improvers tested and approved by Mercedes-Benz. During use, please observe the information on operation. Correct dosage and sufficient mixing are decisive in improving low-temperature resistance with the flow improver. Overdosage can potentially even decrease low-temperature resistance and must therefore be avoided. Follow the manufacturer's guidelines on dosage. Mix the additive into the diesel in good time, before the flow characteristics of the diesel become insufficient. Otherwise, malfunctions can arise through heating the fuel system, e.g. through parking in a heated garage. More information about recommended flow improvers can be obtained from any qualified specialist workshop.

448 Service products and filling capacities

Flexible Fuel vehicles Important safety notes G WARNING Fuel is highly flammable. If you handle fuel incorrectly, there is a risk of fire and explosion. You must avoid fire, open flames, creating sparks and smoking. Switch off the engine and, if applicable, the auxiliary heating before refueling. G WARNING Fuel is poisonous and hazardous to health. There is a risk of injury. You must make sure that fuel does not come into contact with your skin, eyes or clothing and that it is not swallowed. Do not inhale fuel vapors. Keep fuel away from children. If you or others come into contact with fuel, observe the following: RWash away fuel from skin immediately

using soap and water.

RIf fuel comes into contact with your eyes, immediately rinse them thoroughly with clean water. Seek medical assistance without delay.

RIf fuel is swallowed, seek medical

assistance without delay. Do not induce vomiting.

RImmediately change out of clothing which

has come into contact with fuel.

Flexible Fuel vehicles can be refueled with the following fuel types: Rpremium-grade unleaded gasoline RE85 fuel Ra mixture of E85 fuel and premium-grade

unleaded gasoline

i Flexible Fuel vehicles can be recognized by the Ethanol up to E85 sticker on the inside of the fuel filler flap.

Fuel consumption The energy content of E85 fuel is less than that of the same amount of premium-grade gasoline. The amount of fuel consumed when operating the vehicle with E85 fuel is therefore higher than with premium-grade gasoline. Maintenance Inform your authorized Mercedes-Benz Center that you are operating or have operated the vehicle with E85 fuel. Low outside temperatures If the outside temperature is below 32 ‡ (0 †) the starting procedure can take noticeably longer when operating with E85
fuel. E85 fuel is not suitable for use at outside temperatures under -4 ‡ (-20 †).

DEF Important safety notes Comply with the important safety notes for service products when handling DEF (Y page 444). DEF is a water-soluble fluid for the exhaust gas aftertreatment of diesel engines. It is: Rnot poisonous Rcolorless and odorless Rnot flammable When you open the DEF container, small amounts of ammonia vapor may be released. Ammonia vapors have a pungent odor and are particularly irritating to the skin, to mucous membranes and to the eyes. You may experience a burning sensation in your eyes, nose and throat. Coughing and watering of the eyes are possible. Do not inhale ammonia vapors. Fill the DEF tank only in well-ventilated areas.

Service products and filling capacities

449

Low outside temperatures DEF freezes at a temperature of approximately 12 ‡ (-11 †). The vehicle is delivered from the factory equipped with a DEF preheating system. Winter operation can thus be guaranteed even at temperatures below 12 ‡ (-11 †).

Additives ! Only use DEF in accordance with ISO

22241. Do not use additives with DEF and do not dilute DEF with water. This may destroy the BlueTEC exhaust gas aftertreatment system.

Engine oil General notes ! Never use engine oil or an oil filter of a specification other than is necessary to fulfill the prescribed service intervals. Do not change the engine oil or oil filter in order to achieve longer replacement intervals than those prescribed. You could otherwise cause engine damage or damage to the exhaust gas aftertreatment. Follow the instructions in the service interval display regarding the oil change. Otherwise, you may damage the engine and the exhaust gas aftertreatment.

Purity ! Impurities in DEF (e.g. due to other

service products, cleaning agents or dust) lead to: Rincreased emission values Rdamage to the catalytic converter Rengine damage Rmalfunctions in the BlueTEC exhaust gas

aftertreatment system

Assuring the purity of DEF is particularly important with respect to avoiding malfunctions in the BlueTEC exhaust gas aftertreatment system. If DEF is pumped out of the DEF tank, e.g. during repair work, it must not be returned to the tank. The purity of the fluid can no longer be guaranteed.

Filling capacities

Model ML 350 BlueTEC 4MAT IC

Total capacity

7.3 US gal (27.5 l)

Comply with the important safety notes for service products when handling engine oil (Y page 444). The engine oils are matched to the performance of Mercedes-Benz engines and service intervals. You should therefore only use engine oils and oil filters that are approved for vehicles with maintenance systems. For a list of approved engine oils and oil filters, consult an authorized Mercedes-Benz Center. Or visit the website http://bevo.mercedes-benz.com. The table shows which engine oils have been approved for your vehicle. Model

MB

Engine model 276

278

157
642

ML 350 BlueEFFICIENCY ML 350 4MATIC BlueEFFICIENCY ML 550 4MATIC BlueEFFICIENCY ML 63 AMG ML 350 BlueTEC 4MATIC

Approval

229.5

229.5

229.5
228.51, 229.31, 229.51

450 Service products and filling capacities

Use only SAE 0W-40 or SAE 5W-40 engine oils for AMG vehicles. i MB approval is indicated on the oil

containers.

Capacity

Filling capacities The following values refer to an oil change including the oil filter. Model ML 350 BlueEFFICIENCY ML 350 4MATIC BlueEFFICIENCY ML 550 4MATIC BlueEFFICIENCY ML 63 AMG

7.4 US qt (7.0 l)

9.0 US qt (8.5 l)

Without external oil cooler: 9.0 US qt

(8.5 l)

ML 350 BlueTEC 4
MATIC

8.5 US qt (8.0 l)

Additives ! Do not use any additives in the engine oil.

This could damage the engine.

Engine oil viscosity

Viscosity describes the flow characteristics of a fluid. If an engine oil has a high viscosity, this means that it is thick; a low viscosity means that it is thin.

Select an engine oil with an SAE (viscosity) classification suitable for the prevailing outside temperatures. The table shows you which SAE classifications are to be used. The low-temperature characteristics of engine oils can deteriorate significantly, e.g. as a result of aging, soot and fuel deposits. It is therefore strongly recommended that you carry out regular oil changes using an approved engine oil with the appropriate SAE classification.

Brake fluid G WARNING The brake fluid constantly absorbs moisture from the air. This lowers the boiling point of the brake fluid. If the boiling point of the brake fluid is too low, vapor pockets may form in the brake system when the brakes are applied hard. This would impair braking efficiency. There is a risk of an accident. You should have the brake fluid renewed at the specified intervals.

Comply with the important safety notes for service products when handling brake fluid (Y page 444). The brake fluid change intervals can be found in the Maintenance Booklet. Only use brake fluid approved by Mercedes- Benz according to MB Approval 331.0. Information about approved brake fluid can be obtained at any qualified specialist workshop or on the Internet at http://bevo.mercedes-benz.com. i Have the brake fluid regularly replaced at

a qualified specialist workshop and have this confirmed in the Maintenance Booklet.

Service products and filling capacities

451

Coolant Important safety notes G WARNING If antifreeze comes into contact with hot components in the engine compartment, it may ignite. There is a risk of fire and injury. Let the engine cool down before you add antifreeze. Make sure that antifreeze is not spilled next to the filler neck. Thoroughly clean the antifreeze from components before starting the engine.

! Only add coolant that has been premixed with the desired antifreeze protection. You could otherwise damage the engine. Further information on coolants can be found in the Mercedes-Benz Specifications for Service Products, MB Specifications for Service Products 310.1, e.g. on the Internet at http://bevo.mercedes-benz.com. Or contact a qualified specialist workshop. ! Always use a suitable coolant mixture,

even in countries where high temperatures prevail. Otherwise, the engine cooling system is not sufficiently protected from corrosion and overheating.

Comply with the important safety precautions for service products when handling coolant (Y page 444). The coolant is a mixture of water and antifreeze/corrosion inhibitor. It performs the following tasks: Rcorrosion protection Rantifreeze protection Rraising the boiling point If the coolant has antifreeze protection down to -35 ‡ (-37 †), the boiling point of the coolant during operation is approximately 266 ‡ (130 †).

The antifreeze/corrosion inhibitor concentration in the engine cooling system should: Rbe at least 50%. This will protect the engine

cooling system against freezing down to approximately -35 ‡ (-37 †).

Rnot exceed 55% (antifreeze protection

down to -49 ‡ [-45 †]). Otherwise, heat will not be dissipated as effectively.

If the vehicle has lost coolant, add equal amounts of water and antifreeze/corrosion inhibitor. Mercedes-Benz recommends an antifreeze/ corrosion inhibitor concentrate in accordance with MB Specifications for Service Products 310.1. The coolant is checked with every maintenance interval at a qualified specialist workshop. i When the vehicle is first delivered, it is filled with a coolant mixture that ensures adequate antifreeze and corrosion protection.

Filling capacities

Model ML 350 BlueEFFICIENCY ML 350 4MATIC BlueEFFICIENCY ML 550 4MATIC BlueEFFICIENCY ML 63 AMG

Capacity

Approx. 11.1 US qt

(10.5 l)

Approx. 13.6 US qt

(12.9 l)

Approx. 12.4 US qt

(11.7 l)

ML 350 BlueTEC 4
MATIC

Approx. 12.2 US qt

(11.5 l)

i Use MB 325.0 or MB 326.0 corrosion

inhibitor/antifreeze.

452 Vehicle data

Windshield washer system and headlamp cleaning system Important safety notes G WARNING Windshield washer concentrate is highly flammable. If it comes into contact with hot engine components or the exhaust system it could ignite. There is a risk of fire and injury. Make sure that no windshield washer concentrate is spilled next to the filler neck.

! Only use washer fluid that is suitable for plastic lamp lenses, e.g. MB SummerFit or MB WinterFit. Unsuitable washer fluid could damage the plastic lenses of the headlamps.

! Do not add distilled or de-ionized water to the washer fluid container. Otherwise, the level sensor may be damaged.

! Only MB SummerFit and MB WinterFit

washer fluid should be mixed together. The spray nozzles may otherwise become blocked.

Comply with the important safety notes for service products when handling washer fluid (Y page 444). At temperatures above freezing: X Fill the washer fluid reservoir with a mixture of water and windshield washer fluid, e.g. MB SummerFit.

Add 1 part MB SummerFit to 100 parts water.

At temperatures below freezing: X Fill the washer fluid reservoir with a mixture

of water and washer fluid, e.g. MB WinterFit.

Adapt the mixing ratio to the outside temperature. RDown to 14 ‡ (Ò10 †): mix 1 part MB

WinterFit to 2 parts water.

RDown to Ò4 ‡ (Ò20 †): mix 1 part MB

WinterFit to 1 part water.

RDown to Ò20.2 ‡ (Ò29 †): mix 2 parts MB

WinterFit to 1 part water.

i Add windshield washer fluid, e.g. MB

SummerFit or MB WinterFit, to the washer fluid all year round.

Filling capacities

Model All models (except for AMG vehicles) AMG vehicles

Capacity

5.5 US qt (5.2 l)

6.3 US qt (6.0 l)

Vehicle data General notes Please note that for the specified vehicle data: RThe heights specified may vary as a result

of:

tires load

- condition of the suspension - optional equipment

Observe the information relating to level control: RAIRMATIC package (Y page 210) RON&OFFROAD package (Y page 204)

Dimensions and weights

Models with:

Steel suspension AIRMATIC package

ON&OFFROAD package

AMG vehicles

Opening height

86.4 in

(2195 mm) 84.3 in - 87.2 in

(2140 mm - 2215 mm) 84.3 in - 88.4 in

(2140 mm - 2245 mm)

Max.

headroom

78.2 in

(1987 mm) 76.0 in - 79.0 in

(1931 mm - 2006 mm) 76.0 in - 80.2 in

(1931 mm - 2036 mm)

Opening height

84.6 in - 86.9 in

Max.

headroom 76.3 in - 78.7 in

(2148 mm - 2208 mm)

(1938 mm - 1998 mm)

All models (except for AMG vehicles) Vehicle width including exterior mirrors Vehicle height (steel suspension)

84.3 in

(2141 mm)

70.7 in

(1796 mm)

Vehicle data 453

All models (except for AMG vehicles) Maximum vehicle height (AIRMATIC package) Maximum vehicle height (ON&OFFROAD package) Minimum vehicle height (highway driving level) Wheelbase

Maximum ground clearance (AIRMATIC package) Maximum ground clearance (ON&OFFROAD package) Minimum ground clearance (AIRMATIC package) (ON&OFFROAD package) Ground clearance (steel suspension) Turning radius

Maximum roof load

ML 350 BlueEFFICIENCY ML 350 4MATIC BlueEFFICIENCY ML 350 BlueTEC 4MATIC Vehicle length

71.6 in

(1818 mm)

72.8 in

(1848 mm)

69.2 in

(1758 mm) 114.8 in (2915 mm)

10.0 in (255 mm)

11.2 in (285 mm)

7.1 in

(180 mm)

8.0 in

(202 mm) 38.7 ft (11.80 m)

220 lb (100 kg)

189.1 in (4804 mm)

454 Trailer tow hitch

ML 550 4MATIC BlueEFFICIENCY Vehicle length

ML 63 AMG Vehicle length

Vehicle width including exterior mirrors Maximum vehicle height

Minimum vehicle height

Wheelbase

Maximum ground clearance Minimum ground clearance Turning radius

Maximum roof load

190.5 in (4839 mm)

189.6 in (4817 mm)

84.3 in

(2141 mm)

71.3 in

(1812 mm)

69.0 in

(1752 mm) 114.8 in (2915 mm)

9.1 in

(231 mm)

6.7 in

(171 mm) 38.7 ft (11.80 m)

220 lb (100 kg)

Trailer tow hitch Mounting dimensions ! If you have a trailer tow hitch retrofitted, changes to the cooling system and drive train may be necessary, depending on the vehicle type. If you have a trailer tow hitch retrofitted, observe the anchorage points on the chassis frame.

Anchorage points for the trailer tow hitch (example) : Anchorage points ; Rear axle center line

Trailer tow hitch 455

Trailer loads Trailer loads, trailer drawbar noseweights and axle loads Missing values were not available at time of going to print.

All models (except AMG vehicles and

ML 350 BlueEFFICIENCY)

Permissible trailer load, unbraked Permissible trailer load, braked (at a minimum gradient-climbing capability of 12% from a standstill) Maximum drawbar noseweight (the drawbar noseweight is not included in the trailer load) Permissible rear axle load when towing a trailer

Permissible trailer load, unbraked Permissible trailer load, braked (at a minimum gradient-climbing capability of 12% from a standstill) Maximum drawbar noseweight (the drawbar noseweight is not included in the trailer load) Permissible rear axle load when towing a trailer

Permissible trailer load, unbraked Permissible trailer load, braked (at a minimum gradient-climbing capability of 12% from a standstill)

7198 lbs (3265 kg)

575 lbs (261 kg)

3527 lbs (1600 kg)

For model ML 350 BlueTEC 4MATIC:

3637 lbs (1650 kg)

ML 350 BlueEFFICIENCY

6613 lbs (3000 kg)

529 lbs (240 kg)

3527 lbs (1600 kg)

ML 63 AMG

1653 lbs (750 kg) 7198 lbs (3265 kg)

456 Trailer tow hitch

Maximum drawbar noseweight (the drawbar noseweight is not included in the trailer load) Permissible rear axle load when towing a trailer

Ball position

ML 63 AMG

575 lbs (261 kg)

3637 lbs (1650 kg)

Ball position of the ball coupling When choosing a ball coupling, the dimensions stated in the illustration must not be exceeded.

Publication details Internet

Further information about Mercedes-Benz vehicles and about Daimler AG can be found on the following websites http://www.mbusa.com (USA only) http://www.mercedes-benz.ca (Canada only)

Editorial office

You are welcome to forward any queries or suggestions you may have regarding this Operator's Manual to the technical documentation team at the following address: Daimler AG, HPC: CAC, Customer Service, 70546 Stuttgart, Germany ©Daimler AG: Not to be reprinted, translated or otherwise reproduced, in whole or in part, without written permission of Daimler AG.

As at 10.05.2012

É1665848681QËÍ 1665848681

Order no. 6515 0442 13 Part no. 166 584 86 81 Edition B 2013

Nur für internen Gebrauch / For internal use only