Login- Download PDF Manual
-
o During ABS operation, a slight pulsation may be felt in the brake pedal when the brakes are applied. Also, a noise may be heard in the engine compartment while braking. These conditions are normal and indicate that the anti-lock brake system is functioning properly.
WARNING:
ABS will not prevent accidents due to im- proper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always main- tain a safe distance between you and ob- jects ahead. Vehicle speeds should always be reduced during extreme road condi- tions. The braking distance for cars equipped with an anti-lock braking system may be longer than for those without it in the following road conditions. During these conditions the vehicle should be driven at reduced speeds.
o Rough, gravel or snow-covered roads. o With tire chains installed. o Roads where the road surface is pitted or
has different surface height.
The safety features of an ABS equipped vehicle should not be tested by high speed driving or cornering. This could endanger the safety of yourself or others.
ELECTRONIC STABILITY CONTROL (ESC) SYSTEM
C310A04JM-AAT (If installed)
WARNING:
Never drive too fast for the road conditions or too quickly when cornering. Electronic stability control (ESC) will not prevent ac- cidents. Excessive speed in turns, abrupt maneuvers and hydroplaning on wet sur- faces can still result in serious accidents. Only a safe and attentive driver can prevent accidents by avoiding maneuvers that cause the vehicle to lose traction. Even with ESC installed, always follow all the normal precautions for driving - including driving at safe speeds for the conditions.
gkflhma-2.p65
12
9/12/2006, 3:20 PM
DRIVING YOUR HYUNDAI
13
C310B01JM-AAT ESC ON/OFF Mode
When the ESC is operating, the ESC indicator in the instrument cluster will blink. If you turn the system off by pressing the ESC switch, the ESC-OFF indicator will come on and stay on. In the ESC-OFF mode, the stability control will be deactivated. Adjust your driving accordingly. To turn the system back on, press the switch again. The ESC-OFF indicator should go off.
NOTE: The ESC mode will automatically be turned ON after the engine is turned off and re- started.
CAUTION:
Driving with varying tire or wheel size may cause the ESC system to malfunction. When replacing tires, make sure they are the same size as your original tires.
OGK056303N
WARNING:
Electronic stability control is only a driving aid; all normal precautions for driving in inclement weather and on slippery road surfaces should be observed.
The Electronic Stability Control (ESC) system is designed to stabilize the vehicle during cor- nering manuevers. ESC checks where you are steering and where the vehicle is actually going. ESC applies the brakes at individual wheels and intervenes in the engine management system to stabilize the vehicle.
The Electronic Stability Control (ESC) system is an electronic system designed to help the driver maintain vehicle control under adverse conditions. It is not a substitute for safe driving practices. Factors including speed, road conditions and driver steering input can all affect whether ESC will be effective in preventing a loss of control. It is still your responsibility to drive and corner at reasonable speeds and to leave a sufficient margin of safety.
gkflhma-2.p65
13
9/12/2006, 3:20 PM
2 DRIVING YOUR HYUNDAI 14
C310D01JM-AAT Indicators and Warning
The indicators should illuminate when the igni- tion key is turned to ON or START but should go out after three seconds. If the indicators do not illuminate, or the ESC or ESC-OFF indicator does not go out after 3
seconds, have the vehicle checked by an authorized dealer.Should there be any unusual conditions in the device while driving, ESC-OFF indicator illumi- nates as a warning. If ESC-OFF indicator illuminates, pull your car to a safe place and stop the engine. Then, start the engine again to check if the ESC- OFF indicator goes out.
If the indicator remains lit even after the engine has been started, have your car checked by an authorized Hyundai dealer.
GOOD BRAKING PRACTICES
C130A02A-AAT
WARNING:
o Whenever leaving vehicle or parking, always set the parking brake as far as possible and fully engage the vehicle's transaxle into the park position. Ve- hicles not fully engaged in park with the parking brake set are at risk for moving inadvertently and injuring yourself or others.
o All vehicles should always have the park- ing brake fully engaged when parking to avoid inadvertent movement of the car which can injure occupants or pedestri- ans.
o Nothing should be carried on top of the shelf panel behind the rear seat. If there were an accident or a sudden stop, such objects could move forward and cause damage to the vehicle or injure the occu- pants.
o After being parked, check to be sure the parking brake is not engaged and that the parking brake indicator light is out before driving away.
o Driving through water may get the brakes wet. They can also get wet when the car is washed. Wet brakes can be dangerous! Your car will not stop as quickly if the brakes are wet. Wet brakes cause the car to pull to one side. To dry the brakes, apply the brakes lightly while driving slowly until the braking action returns to normal, taking care to keep the car under control at all times. If the braking action does not return to normal, stop as soon as it is safe to do so and call your Hyundai dealer for assistance.
o Don’t coast down hills with the car out of gear. This is extremely hazardous. Keep the car in gear at all times, use the brakes to slow down, then shift to a lower gear so that engine braking will help you maintain a safe speed. o Don’t "ride" the brake pedal. Resting your foot on the brake pedal while driving can be dangerous because it can result in the brakes overheating and losing their effectiveness. It also increases the wear of the brake com- ponents.
o If a tire goes flat while you are driving, apply the brakes gently and keep the car pointed straight ahead while you slow down. When you are moving slowly enough for it to be safe to do so, pull off the road and stop in a safe place.
gkflhma-2.p65
14
9/12/2006, 3:20 PM
o If your car is equipped with an automatic transaxle, don’t let your car creep forward. To avoid creeping forward, keep your foot on the brake pedal when the car is stopped.
o Use caution when parking on a hill. Firmly engage the parking brake and place the gear selector lever in "P" (automatic transaxle) or in first or reverse gear (manual transaxle). If your car is facing downhill, turn the front wheels into the curb to help keep the car from rolling. If your car is facing uphill, turn the front wheels away from the curb to help keep the car from rolling. If there is no curb or if it is required by other conditions to keep the car from rolling, block the wheels.
o Under some conditions your parking brake can freeze in the engaged position. This is most likely to happen when there is an accumulation of snow or ice around or near the rear brakes or if the brakes are wet. If there is a risk that the parking brake may freeze, apply it only temporarily while you put the gear selector lever in "P" (automatic) or in first or reverse gear (manual transaxle) and block the rear wheels so the car cannot roll. Then release the parking brake.
o Do not hold the vehicle on the upgrade with the accelerator pedal. This can cause the transmission to overheat. Always use the brake pedal or parking brake.
DRIVING FOR ECONOMY
C140A02A-AAT You can save fuel and get more miles from your car if you follow these suggestions:
o Drive smoothly. Accelerate at a moderate rate. Don't make "jack-rabbit" starts or full- throttle shifts and maintain a steady cruising speed. Don't race between stoplights. Try to adjust your speed to that of the other traffic so you don't have to change speeds unnec- essarily. Avoid heavy traffic whenever pos- sible. Always maintain a safe distance from other vehicles so you can avoid unneces- sary braking. This also reduces brake wear. o Drive at a moderate speed. The faster you drive, the more fuel your car uses. Driving at a moderate speed, especially on the high- way, is one of the most effective ways to reduce fuel consumption.
o Don't "ride" the brake or clutch pedal. This can increase fuel consumption and also increase wear on these components. In addition, driving with your foot resting on the brake pedal may cause the brakes to over- heat, which reduces their effectiveness and may lead to more serious consequences. o Take care of your tires. Keep them inflated to the recommended pressure. Incorrect inflation, either too much or too little, results in unnecessary tire wear. Check the tire pressures at least once a month.
DRIVING YOUR HYUNDAI
15
o Be sure that the wheels are aligned cor- rectly. Improper alignment can result from hitting curbs or driving too fast over irregular surfaces. Poor alignment causes faster tire wear and may also result in other problems as well as greater fuel consumption.
o Keep your car in good condition. For better fuel economy and reduced maintenance costs, maintain your car in accordance with the maintenance schedule in Section 5. If you drive your car in severe conditions, more frequent maintenance is required (see Section 5 for details).
o Keep your car clean. For maximum service, your Hyundai should be kept clean and free of corrosive materials. It is especially impor- tant that mud, dirt, ice, etc. not be allowed to accumulate on the underside of the car. This extra weight can result in increased fuel consumption and also contribute to corro- sion.
o Travel lightly. Don't carry unnecessary weight in your car. Weight reduces fuel economy.
o Don't let the engine idle longer than neces- sary. If you are waiting (and not in traffic), turn off your engine and restart only when you're ready to go.
o Remember, your Hyundai does not require extended warm-up. After the engine has started, allow the engine to run for 10 to 20
seconds prior to placing the vehicle in gear. In very cold weather, however, give your engine a slightly longer warm-up period.gkflhma-2.p65
15
9/12/2006, 3:20 PM
2 DRIVING YOUR HYUNDAI 16
o Don't "lug" or "over-rev" the engine. Lugging is driving too slowly in too high a gear result- ing in the engine bucking. If this happens, shift to a lower gear. Over-revving is racing the engine beyond its safe limit. This can be avoided by shifting at the recommended speeds.
o Use your air conditioning sparingly. The air conditioning system is operated by engine power so your fuel economy is reduced when you use it.
SMOOTH CORNERING
WINTER DRIVING
C150A01A-AAT Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle accelera- tion. If you follow these suggestions, tire wear will be held to a minimum.
C160A01A-AAT The more severe weather conditions of winter result in greater wear and other problems. To minimize the problems of winter driving, you should follow these suggestions:
C160B01A-AAT Snowy or Icy Conditions
To drive your vehicle in deep snow, it may be necessary to use snow tires or to install tire chains on your tires. If snow tires are needed, it is necessary to select tires equivalent in size and type to the original equipment tires. Failure to do so may adversely affect the safety and handling of your car. Speeding, rapid accelera- tion, sudden brake applications, and sharp turns are potentially very hazardous practices. During deceleration, use engine braking to the fullest extent. Sudden brake applications on snowy or icy roads may cause skids to occur. You need to keep sufficient distance between the vehicle in front and your vehicle. Also, apply the brake gently. It should be noted that installing tire chains on the tire will provide a greater driving force, but will not prevent side skids.
NOTE: Tire chains are not legal in all states. Check state laws before fitting tire chains.
gkflhma-2.p65
16
9/12/2006, 3:20 PM
DRIVING YOUR HYUNDAI
17
C160C01A-AAT Use High Quality Ethylene Glycol Cool- ant
C160E01A-AAT Change to "Winter Weight" Oil if Neces- sary
C160H02A-AAT Use Approved Window Washer Anti- Freeze in System
Your Hyundai is delivered with high quality ethylene glycol coolant in the cooling system. It is the only type of coolant that should be used because it helps prevent corrosion in the cool- ing system, lubricates the water pump and prevents freezing. Be sure to replace or replen- ish your coolant in accordance with the main- tenance schedule in Section 5. Before winter, have your coolant tested to assure that its freezing point is sufficient for the temperatures anticipated during the winter.
C160D01F-AAT Check Battery and Cables
Winter puts additional burdens on the battery system. Visually inspect the battery and cables as described in Section 6 (See page 6-19). The level of charge in your battery can be checked by your Hyundai dealer or a service station.
In some climates it is recommended that a lower viscosity "winter weight" oil be used during cold weather. See Section 9 for recommendations. If you aren’t sure what weight oil you should use, consult your Hyundai dealer.
C160F01F-AAT Check Spark Plugs and Ignition System
Inspect your spark plugs as described in Sec- tion 6 (See page 6-10) and replace them if necessary. Also check all ignition wiring and components to be sure they are not cracked, worn or damaged in any way.
C160G01A-AAT To Keep Locks from Freezing
To keep the locks from freezing, squirt an approved de-icer fluid or glycerine into the key opening. If a lock is covered with ice, squirt it with an approved de-icing fluid to remove the ice. If the lock is frozen internally, you may be able to thaw it out by using a heated key. Handle the heated key with care to avoid injury.
To keep the water in the window washer system from freezing, add an approved window washer anti-freeze solution in accordance with instruc- tions on the container. Window washer anti- freeze is available from Hyundai dealers and most auto parts outlets. Do not use engine coolant or other types of anti-freeze as these may damage the paint finish.
C160I01A-AAT Don’t Let Your Parking Brake Freeze
Under some conditions your parking brake can freeze in the engaged position. This is most likely to happen when there is an accumulation of snow or ice around or near the rear brakes or if the brakes are wet. If there is a risk the parking brake may freeze, apply it only tempo- rarily while you put the gear selector lever in "P" (automatic) or in first or reverse gear (manual transaxle) and block the rear wheels so the car cannot roll. Then release the parking brake.
gkflhma-2.p65
17
9/12/2006, 3:20 PM
2 DRIVING YOUR HYUNDAI 18
C160J01A-AAT Don’t Let Ice and Snow Accumulate Underneath
Under some conditions, snow and ice can build up under the fenders and interfere with the steering. When driving in severe winter condi- tions where this may happen, you should peri- odically check underneath the car to be sure the movement of the front wheels and the steering components is not obstructed.
C160K01A-AAT Carry Emergency Equipment
Depending on the severity of the weather where you drive your car, you should carry appropri- ate emergency equipment. Some of the items you may want to carry include tire chains, tow straps or chains, flashlight, emergency flares, sand, a shovel, jumper cables, a window scraper, gloves, ground cloth, coveralls, a blanket, etc.
HIGHER SPEED MOTORING
C170A02A-AAT Pre-Trip Inspections 1. Tires: Adjust the tire inflation pressures to specifica- tion. Low tire inflation pressures will result in overheating and possible failure of the tires. Avoid using worn or damaged tires which may result in reduced traction or tire failure.
NOTE: Never exceed the maximum tire inflation pressure shown on the tires.
2. Fuel, engine coolant and engine oil: High speed travel consumes more fuel than urban motoring. Do not forget to check both engine coolant and engine oil.
3. Drive belt: A loose or damaged drive belt may result in overheating of the engine.
WARNING:
o Underinflated or overinflated tires can cause poor handling, loss of vehicle control, and sudden tire failure leading to accidents, injuries, and even death. Always check tires are properly inflated before driving. Refer to pages 8-2~8-3
for proper tire pressures and further information.o Driving on tires with no or insufficient tread is dangerous. Worn-out tires can result in loss of vehicle control, colli- sions, injury, and even death. Worn-out tires should be replaced as soon as possible and should never be used for driving. Always check tire tread before driving your car.
gkflhma-2.p65
18
9/12/2006, 3:20 PM
USE OF LIGHTS
TRAILER OR VEHICLE TOWING
C180A01A-AAT Check your lights regularly for correct opera- tion and always keep them clean. When driving during the day in conditions of poor visibility, it is helpful to drive with headlights on low beam. This enables you to be seen, as well as to see.
C190A01S-AAT If you are considering towing with your car, you should first check with your State's Department of Motor Vehicles to determine their legal re- quirements. Since laws vary from State to State, the require- ments for towing trailers, cars, other types of vehicles, or apparatus may differ. Ask your Hyundai dealer for further details before towing.
CAUTION:
Do not do any towing with your car during its first 1,200 miles (2,000 km) in order to allow the engine to properly break in. Fail- ure to heed this caution may result in seri- ous engine or transaxle damage.
DRIVING YOUR HYUNDAI
19
C190B01S-AAT Trailer Hitches
Select the proper hitch and ball combination, making sure that its location is compatible with that of the trailer or vehicle being towed. Use a quality non-equalizing hitch which distributes the tongue load uniformly throughout the chas- sis.
The hitch should be bolted securely to the car and installed by a qualified technician. DO NOT USE A HITCH DESIGNED FOR TEMPORARY INSTALLATION AND NEVER USE ONE THAT ATTACHES ONLY TO THE BUMPER.
C190C03S-AAT Trailer Brakes
If your trailer is equipped with a braking system, make sure it conforms to federal and/or local regulations and that it is properly installed and operating correctly.
NOTE: If you tow a trailer or vehicle, your car will require more frequent maintenance due to the additional load. See "Maintenance Un- der Severe Usage Conditions" on page 5-6.
gkflhma-2.p65
19
9/12/2006, 3:20 PM
2 DRIVING YOUR HYUNDAI 20
CAUTION:
o Never connect a trailer brake system
directly to the vehicle brake system.
o When towing a trailer on steep grades (in excess of 6%) pay close attention to the engine coolant temperature gauge to ensure the engine does not overheat. If the needle of the coolant temperature gauge moves across the dial towards "H" (HOT), pull over and stop as soon as it is safe to do so, and allow the engine to idle until it cools down. You may proceed once the engine has cooled sufficiently.
C190D01S-AAT Safety Chains
Should the hitch connection between your vechile and the trailer or vehicle you are towing fail, the trailer or vehicle could wander danger- ously across other lanes of traffic and ultimately leave the roadway. To eliminate this potentially dangerous situation, safety chains, attached between your car and the trailer or towed vehicle, are required in most states.
C190E02GK-AAT Trailer Weight Limit
Tongue load
Total trailer weight
C190E01L Tongue loads can be increased or decreased by redistributing the load in the trailer. This can be verified by checking the total weight of the loaded trailer and then checking the load on the tongue.
NOTE: 1. Never load the trailer with more weight in the back than in the front. About 60% of the trailer load should be in the front half on the trailer and the remaining 40% in the rear.
Gross axle weight Gross vehicle weight
C190E02L 2. The total gross vehicle weight with trailer must not exceed the Gross Vehicle Weight Rating (GVWR) shown on the vehicle identification plate (see page 8- 1). The total gross vehicle weight is the combined weight of the vehicle, driver, all passengers and their luggage, cargo, hitch, trailer tongue load and other op- tional equipment.
3. The front or rear axle weight must not exceed the Gross Axle Weight Rating (GAWR) shown on the vehicle identifi- cation plate (see page 8-2). It is possible that your towing package does not ex- ceed the GVWR but exceeds the GAWR. Improper trailer loading and/or too much luggage in the trunk can overload the rear axle. Redistribute the load and check the axle weight again.
gkflhma-2.p65
20
9/12/2006, 3:20 PM
!
CAUTION:
The following specifications are recom- mended when towing a trailer. The loaded trailer weight cannot safely exceed the val- ues in the chart below.
Lbs. (kg)
Maximum Towable Weight
Trailer
1000 (453)
Tongue 100 (45)
WARNING:
o Improperly loading your vehicle and trailer can seriously affect its steering and braking performance causing a crash which could cause serious injury or death.
o Towing a trailer affected vehicle han-
dling and braking.
o Drive more slowly when towing a trailer and allow more distance when braking. o Be careful when driving in slippery and
windy conditions.
o Be careful when turning and while driv-
ing up and down hills.
C190F01S-AAT Trailer or Vehicle Towing Tips
1. Before towing, check hitch and safety chain connections as well as proper operation of the trailer running lights, brake lights, and turn signals.
2. Always drive your vehicle at a moderate
speed. (Less than 60 mph)
3. Trailer towing requires more fuel than normal
conditions.
4. To maintain engine braking efficiency and electrical charging performance, do not use fifth gear (manual transaxle) or overdrive (automatic transaxle).
5. Always secure items in the trailer to prevent
load shift while driving.
6. Check the condition and air pressure of all tires on the trailer and your car. Low tire pressure can seriously affect the handling. Also check the spare tire.
7. The vehicle/trailer combination is more af-
fected by crosswind and buffeting. When being passed by a large vehicle, keep a constant speed and steer straight ahead. If there is too much wind buffeting, slow down to get out of the other vehicle's air turbulence. 8. When parking your car and trailer, especially on a hill, be sure to follow all the normal precautions. Turn your front wheel into the curb, set the parking brake firmly, and put the transaxle in 1st or Reverse (manual) or Park
DRIVING YOUR HYUNDAI
21
9.
(automatic). In addition, place wheel chocks at each of the trailer's tires. If the trailer has electric brakes, start your vehicle and trailer moving, and then apply the trailer brake controller by hand to be sure the brakes are working. This lets you check your electrical connection at the same time. 10.During your trip, occasionally check to be sure that the load is secure, and that the lights and any trailer brakes are still working. 11.Avoid jerky starts, sudden acceleration or
sudden stops.
12.Avoid sharp turns and rapid lane changes. 13.Avoid holding the brake pedal down too long or too frequently. This could cause the brakes to overheat, resulting in reduced braking efficiency.
14.When going down a hill, shift into a lower gear
and use the engine braking effect. When ascending a long grade, downshift the transaxle to a lower gear and reduce speed to reduce chances of engine overloading and/or overheating.
15.If you have to stop while going uphill, do not hold the vehicle in place by pressing on the accelerator. This can cause the automatic transaxle to overheat. Use the parking brake or footbrake.
NOTE: When towing check transaxle fluid more frequently.
gkflhma-2.p65
21
9/12/2006, 3:20 PM
2 DRIVING YOUR HYUNDAI 22
CAUTION:
If overheating should occur when towing, (the temperature gauge reads near red zone), taking the following action may reduce or eliminate the problem.
VEHICLE LOAD LIMIT
C190F01GK-AAT Tire and Loading Information Label Type A
Type C
1. Turn off the air conditioner. 2. Reduce highway speed. 3. Select a lower gear when going uphill. 4. While in stop and go traffic, place the gear selector in park or neutral and idle the engine at a higher speed.
Type B
I030A03GK1
I030A03GK3
The tire label located on the driver's side of the center pillar outer panel gives the original tire size, cold tire pressures recommended for your ve- hicle, the number of people that can be in your vehicle and vehicle capacity weight.
I030A03GK2
gkflhma-2.p65
22
9/12/2006, 3:20 PM
DRIVING YOUR HYUNDAI
23
Vehicle capacity weight: 700 lbs (317 kg) Vehicle capacity weight is the maxi- mum combined weight of occupants and cargo. If your vehicle is equipped with a trailer, the combined weight in- cludes the tongue load.
Seating capacity: Total: 4 persons
(Front seat: 2 persons, Rear seat: 2 persons)
Seating capacity is the maximum num- ber of occupants including a driver, your vehicle may carry. However the seating capacity may be reduced based upon the weight of all of the occupants, and the weight of the cargo being carried or towed. Do not overload the vehicle as there is a limit to the total weight, or load limit including occupants and cargo, the vehicle can carry.
Towing capacity: Towing capacity is the maximum trailer weight including its cargo weight, your vehicle can tow. See the section "Trailer or Vehicle Towing" for specifications about the trailer weight.
Cargo capacity: The cargo capacity of your vehicle will increase or decrease depending on the weight and the number of occupants and the tongue load, if your vehicle is equipped with a trailer.
Steps for Determining Correct Load Limit (1)Locate the statement "The combined weight of occupants and cargo should never exceed XXX kilograms or XXX pounds'' on your vehicle's placard. (2)Determine the combined weight of the driver and passengers that will be riding in your vehicle.
(3)Subtract the combined weight of the driver and passengers from XXX kilograms or XXX pounds.
(4)The resulting figure equals the avail- able amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs, and there will be five 150 lb. passengers in your vehicle, the amount of avail- able cargo and luggage load capac- ity is 650 lbs. (1400-750 (5 x 150) = 650 lbs.)
(5)Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calcu- lated in Step 4.
(6)If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the available cargo and lug- gage load capacity of your vehicle.
gkflhma-2.p65
23
9/12/2006, 3:20 PM
2 DRIVING YOUR HYUNDAI 24
Example 1
Example 2
Example 3
Item
Description
Vehicle Capacity Weight
C190F01JM
Total
1400 lbs
(635 kg)
Item
Description
Vehicle Capacity Weight
C190F02JM
Total
1400 lbs
(635 kg)
Item
Description
Vehicle Capacity Weight
C190F03JM
Total
1400 lbs
(635 kg)
Subtract Occupant Weight
300 lbs
150 lbs (68 kg) × 2
Available Cargo and
Luggage weight
(136 kg)
1100 lbs
(498 kg)
Subtract Occupant Weight
750 lbs
150 lbs (68 kg) x 5
Available Cargo and
Luggage Weight
(340 kg)
650 lbs
(295 kg)
Subtract Occupant Weight
860 lbs
172 lbs (68 kg) x 5
Available Cargo Weight
(390 kg)
540 lbs
(245 kg)
gkflhma-2.p65
24
9/12/2006, 3:20 PM
C190G03JM-AAT Compliance Label
Refer to your vehicle's tire and loading information label for specific informa- tion about your vehicle's capacity weight and seating positions. The combined weight of the driver, passengers and cargo should never exceed your vehicle's capacity weight.
C190G01A The compliance label is located on the driver's side of the center piller outer panel.
The label shows the maximum allow- able weight of the fully loaded vehicle. This is called the GVWR (Gross Ve- hicle Weight Rating). The GVWR in- cludes the weight of the vehicle, all occupants, fuel and cargo.
DRIVING YOUR HYUNDAI
25
This label also tells you the maximum weights that can be supported by the front and rear axles, called Gross Axle Weight Rating (GAWR). To find out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle. Your dealer can help you with this. Be sure to spread out your load equally on both sides of the centerline.
WARNING:
o Never exceed the GVWR for your vehicle, the GAWR for either the front or rear axle and vehicle ca- pacity weight. Exceeding these rat- ings can cause an accident or vehicle damage. You can calcu- late the weight of your load by weighing the items (or people) before putting them in the vehicle. Be careful not to overload your vehicle.
gkflhma-2.p65
25
9/12/2006, 3:20 PM
2 DRIVING YOUR HYUNDAI 26
! WARNING:
o Do not load your vehicle any heavier than the GVWR, either the maximum front or rear GAWR and vehicle capacity weight. If you do, parts, including tires on your ve- hicle can break, and it can change the way your vehicle handles and braking ability. This could cause you to lose control and crash. Also, overloading can shorten the life of your vehicle.
WARNING:
o Overloading your vehicle can cause heat buildup in your vehicle's tires and possible tire failure that could lead to a crash. o Overloading your vehicle can cause increased stopping dis- tances that could lead to a crash. o A crash resulting from poor han- dling vehicle damage, tire failure, or increased stopping distances could result in serious injury or death.
NOTE: o Overloading your vehicle may cause damage. Repairs would not be covered by your warranty. Do not overload your vehicle.
o Using heavier suspension com- ponents to get added durability might not change your weight rat- ings. Ask your dealer to help you load your vehicle the right way.
The label will help you decide how much cargo and installed equipment your vehicle can carry.
If you carry items inside your vehicle – like suitcases, tools, packages, or any- thing else – they more as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, the items will keep going and can cause an injury if they strikes the driver or a passenger.
gkflhma-2.p65
26
9/12/2006, 3:20 PM
DRIVING YOUR HYUNDAI
27
! WARNING:
Items you carry inside your vehicle can strike and injure people in a sudden stop or turn, or in a crash.
o Put things in the cargo area of your vehicle. Try to spread the weight evenly.
o Never stack items, like suitcases, inside the vehicle above the tops of the seats.
o Do not leave an unsecured child
restraint in your vehicle.
o When you carry something inside
the vehicle, secure it.
o Do not drive with a seat folded
down unless necessary.
gkflhma-2.p65
27
9/12/2006, 3:20 PM
WHAT TO DO IN AN EMERGENCY
If the Engine will not Start .............................................. 3-2
Jump Starting ................................................................ 3-3
If the Engine Overheats ................................................ 3-4
Tire Pressure Monitoring System (TPMS) .................... 3-5
Spare Tire ..................................................................... 3-9
If You Have a Flat Tire ................................................ 3-11
Changing a Flat Tire .................................................... 3-11
If Your Vehicle Must be Towed ................................... 3-16
Emergency Towing ..................................................... 3-18
If You Lose Your Keys ................................................ 3-1833
gkflhma-3.p65
9/12/2006, 3:21 PM
3
WHAT TO DO IN AN EMERGENCY
IF THE ENGINE WILL NOT START
D010A01A-AAT
WARNING:
If the engine will not start, do not push or pull the car to start it. This could result in a collision or cause other damage. In addi- tion, push or pull starting may cause the catalytic converter to be overloaded and create a fire hazard.
D010B03A-AAT If Engine Doesn’t Turn Over or Turns Over Slowly
D010C02Y-AAT If Engine Turns Over Normally but Does Not Start
1. Check fuel level. 2. With the key in the "OFF" position, check all connectors at ignition, coils and spark plugs. Reconnect any that may be disconnected or loose.
3. Check the fuel line in the engine compart-
4.
ment. If the engine still does not to start, call a Hyundai dealer or seek other qualified assis- tance.
D010D01A-AAT If the Engine Stalls While Driving
1. Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place.
2. Turn on your emergency flashers. 3. Try to start the engine again. If your vehicle will not start, contact a Hyundai dealer or seek other qualified assistance.
1.
D010B01GK If your car has an automatic transaxle, be sure the gear selector lever is in "N" or "P" and the parking brake is set.
2. Check the battery connections to be sure
they are clean and tight.
3. Turn on the interior light. If the light dims or goes out when you operate the starter, the battery is discharged.
4. Check the starter connections to be sure
they are securely tightened.
5. Do not push or pull the vehicle to start it. See
instructions for "Jump Starting".
gkflhma-3.p65
9/12/2006, 3:21 PM
JUMP STARTING
D020A03A-AAT 2.0L
Dis- charged battery
HGK4001
Dis- charged battery
Booster battery
2.7L
Booster battery
HGK4002
WARNING:
The gas produced by the battery during the jump-start operation is highly explosive. If these instructions are not followed exactly, serious personal injury and damage to the vehicle may occur! If you are not sure how to follow this procedure, seek qualified assistance. Automobile batteries contain sulfuric acid. This is poisonous and highly corrosive. When jump starting, wear pro- tective glasses and be careful not to get acid on yourself, your clothing or on the car.
o If you should accidentally get acid on your skin or in your eyes, immediately remove any contaminated clothing and flush the area with clear water for at least 15 minutes. Then promptly obtain medical attention. If you must be transported to an emergency facil- ity, continue to apply water to the affected area with a sponge or cloth.
o The gas produced by the battery during the jump-start operation is highly explosive. Do not smoke or allow a spark or an open flame in the vicinity.
o The battery being used to provide the jump start must be 12-volt. If you cannot deter- mine that it is a 12-volt battery, do not attempt to use it for the jump start.
WHAT TO DO IN AN EMERGENCY
o To jump start a car with a discharged battery,
follow this procedure exactly:
1.
If the booster battery is installed in another vehicle, be sure the two vehicles are not touching.
2. Turn off all unnecessary lights and acces-
sories in both vehicles.
3. Attach the clamps of the jumper cable in the exact location shown on the previous page. First, attach one clamp of the jumper cable to the positive (+) post or cable of the dis- charged battery. Then attach the other end of the same cable to the positive (+) post or cable of the booster battery. Next, using the other cable, attach one clamp to the negative (-) post or cable of the booster battery. Then attach the other end of that cable to a solid metal part of the engine of the vehicle with the discharged battery away from the battery. Do not connect the cable to any moving part. 4. Start the engine in the car with the booster battery and let it run for a few minutes. This will help to assure that the booster battery is fully charged. During the jumping operation, run the engine in this vehicle at about 2,000
rpm.5. Start the engine in the car with the dis- charged battery using the normal starting procedure. After the engine starts, leave the jumper cables connected and let the engine run at fast idle or about 2000 rpm for several minutes.
gkflhma-3.p65
9/12/2006, 3:21 PM
WHAT TO DO IN AN EMERGENCY
6. Carefully remove the jumper cables in the
reverse order of attachment.
If you do not know why your battery became discharged (because the lights were left on, etc.), have the charging system checked by your Hyundai dealer.
IF THE ENGINE OVERHEATS
D030A02A-AAT If your temperature gauge indicates overheat- ing, you experience a loss of power, or hear loud pinging or knocking and the engine is probably too hot. If this happens and, you should:
1. Pull off the road and stop as soon as it is safe
to do so.
3.
2. Place the gear selector lever in "P" (auto- matic), or neutral (manual transaxle) and set the parking brake. If the air conditioning is on, turn it off. If engine coolant is running out under the car or steam is coming out from the hood, stop the engine. Do not open the hood until the engine coolant has stopped running or the steaming has stopped. If there is no visible loss of engine coolant and no steam, leave the engine running and check to be sure the engine cooling fan is operating. If the fan is not running, turn the engine off.
4. Check to see if the water pump drive belt is missing. If it is not missing, check to see that it is tight. If the drive belt seems to be satisfactory, check for engine coolant leak- ing from the radiator, hoses or under the car. (If the air conditioning had been in use, it is normal for cold water to be draining from it when you stop).
WARNING:
While the engine is running, keep hair, hands, and clothing away from moving parts such as the fan and drive belts to prevent injury.
5.
If the water pump drive belt is broken or engine coolant is leaking out, stop the engine immediately and call the nearest Hyundai dealer for assistance.
WARNING:
Do not remove the radiator cap when the engine is hot. This can allow coolant to be blown out of the opening and cause seri- ous burns.
gkflhma-3.p65
9/12/2006, 3:21 PM
6.
If you cannot find the cause of the overheat- ing, wait until the engine temperature has returned to normal. Then, if the engine cool- ant has been lost, carefully add water to the reservoir (Page 6-8) to bring the fluid level in the reservoir up to the halfway mark.
7. Proceed with caution, keeping alert for fur- ther signs of overheating. If overheating happens again, call a Hyundai dealer for assistance.
CAUTION:
Serious loss of engine coolant indicates there is a leak in the cooling system and this should be checked as soon as possible by a Hyundai dealer.
TIRE PRESSURE MONITORING SYSTEM (TPMS)
WHAT TO DO IN AN EMERGENCY
C320A01JM-AAT
➀ Low Tire Pressure Telltale ➁ TPMS Malfunction Indicator
OGK036400N
Each tire, including the spare (if pro- vided), should be checked monthly when cold and inflated to the inflation pres- sure recommended by the vehicle manu- facturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should de- termine the proper tire inflation pres- sure for those tires.)
As an added safety feature, your ve- hicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure tell- tale when one or more of your tires is significantly under-inflated. Accord- ingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s han- dling and stopping ability.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
gkflhma-3.p65
9/12/2006, 3:21 PM
WHAT TO DO IN AN EMERGENCY
Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operat- ing properly. The TPMS malfunction indicator is provided by a separate tell- tale, which displays the symbol "TPMS" when illuminated. When the malfunc- tion indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS mal- functions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after re- placing one or more tires or wheels on your vehicle to ensure that the replace- ment or alternate tires and wheels allow the TPMS to continue to function prop- erly.
Low tire pressure telltale
When the tire pressure monitoring sys- tem warning telltale is illuminated, one or more of your tires is significantly under-inflated. Immediately reduce your speed, avoid hard cornering and anticipate increased stopping distances. You should stop and check your tires as soon as pos- sible. Inflate the tires to the proper pressure as indicated on the vehicle’s placard or tire inflation pressure label located on the driver’s side center pillar outer panel. If you cannot reach a ser- vice station or if the tire cannot hold the newly added air, replace the low pres- sure tire with the temporary spare tire. Then the TPMS malfunction indicator may turn on and the Low Tire Pressure telltale may turn off after restarting and about 20 minutes of continuous driving before you have the low-pressure tire repaired and replaced on the vehicle.
CAUTION:
In winter or cold weather, the low tire pressure telltale may be illuminated if the tire pressure was adjusted to the recommended tire inflation pres- sure in warm weather. It does not mean your TPMS is malfunctioning because the decreased temperature leads to a proportional lowering of tire pressure. When you drive your vehicle from a warm area to a cold area or from a cold area to a warm area, or the outside temperature is greatly higher or lower, you should check the tire inflation pressure and adjust the tires to the recommended tire inflation pressure.
gkflhma-3.p65
9/12/2006, 3:21 PM
WHAT TO DO IN AN EMERGENCY
! WARNING:
Significantly low tire pressure makes the vehicle unstable and can contrib- ute to loss of vehicle control and increased braking distances. Continued driving on low pressure tires will cause the tires to overheat and fail.
TPMS (Tire pressure monitoring system) malfunction telltale
The TPMS malfunction indicator turns on and stays on when there is a problem with the Tire Pressure Monitoring Sys- tem. If the system is able to correctly detect an under-inflation warning at the same time as system failure then it will illuminate both the TPMS malfunction and the low tire pressure telltale e.g. if Front Left sensor fails, the TPMS mal- function indicator turns, but if Front Right, Rear Left, or Rear Right tire is under-inflated, the low tire pressure tell-
tale may turn on at the same time as the TPMS malfunction indicator. Have the system checked by an autho- rized Hyundai dealer as soon as pos- sible to determine the cause of the problem.
NOTE: o The TPMS malfunction indicator may be illuminated if the vehicle is operated in areas close to elec- tric power supply cables or radio transmitters such as near police stations, government and public offices, broadcasting stations, military installations, airports, or transmitting towers, etc. which can interfere with normal operation of the Tire Pressure Monitoring Sys- tem (TPMS).
o The TPMS malfunction indicator may be illuminated if some elec- tronic devices, such as notebook computers, are used in the ve- hicle. This can interfere with nor- mal operation of the Tire Pressure Monitoring System (TPMS).
o If there is a failed tire sensor, it is possible for the TPMS to tempo- rarily learn a replacement sensor if closely driven to another vehicle that is also equipped with TPMS. In rare cases, this may tempo- rarily delay the TPMS malfunction indicator from turning on.
Changing a tire with TPMS If you have a flat tire, the Low Tire Pressure telltale will turn on. Have the flat tire repaired by an authorized Hyundai dealer as soon as possible or replace the flat tire with the temporary spare tire. NEVER use a puncture-repairing agent to repair and/or inflate a low pressure tire. If used, you will have to replace the tire pressure sensor. Each wheel is equipped with a tire pressure sensor mounted inside the tire behind the valve stem. You must use TPMS specific wheels. It is recom- mended that you always have your tires serviced by an authorized Hyundai dealer as soon as possible.
gkflhma-3.p65
9/12/2006, 3:21 PM
WHAT TO DO IN AN EMERGENCY
After you replace the low pressure tire with the temporary spare tire, the TPMS malfunction indicator may illuminate after restarting and about 20 minutes of continuous driving. Once the low pressure tire is re-inflated to the recommended pressure and in- stalled on the vehicle, the TPMS mal- function indicator and the low tire pres- sure telltale will extinguish. If the low pressure and TPMS malfunction indi- cators are not extinguished after about 20 minutes of continuous driving, please visit an authorized Hyundai dealer. You may not be able to identify a low tire by simply looking at it. Always use a good quality tire pressure gauge to measure the tire's inflation pressure. Please note that a tire that is hot (from being driven) will have a higher pres- sure measurement than a tire that is cold (from sitting stationary for at least 3 hours and driven less than 1 mile during that 3 hour period). Allow the tire to cool before measuring the inflation pressure.
Always be sure the tire is cold before inflating to the recommended pressure. A cold tire means the vehicle has been sitting for 3 hours and driven for less than 1 mile in that 3 hour period.
NOTE: o Do not use any tire sealant if your vehicle is equipped with a Tire Pressure Monitoring System. The liquid sealant can damage the tire pressure sensors.
o In order for the system to correctly monitor tires for under-inflation, there should be a total of exactly 4
sensors fitted to each of the four driven wheel positions. There should be no other sensors in the vehicle since this could cause the system to monitor the wrong sen- sors.WARNING - TPMS
o The TPMS cannot alert you to se- vere and sudden tire damage caused by external factors.
o If you feel any vehicle instability, immediately take your foot off the accelerator and slowly move to a safe position off the road.
WARNING:
Tampering with, modifying, or dis- abling the Tire Pressure Monitoring System (TPMS) components may interfere with the system's ability to warn the driver of low tire pressure conditions and/or TPMS malfunc- tions. Tampering with, modifying, or disabling the Tire Pressure Moni- toring System (TPMS) components may void the warranty for that por- tion of the vehicle.
gkflhma-3.p65
9/12/2006, 3:21 PM
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful
interference, and
2. This device must accept any inter- ference received, including interfer- ence that may cause undesired op- eration.
WARNING:
Changes or modifications not ex- pressly approved by the party re- sponsible for compliance could void the user’s authority to operate the equipment.
SPARE TIRE
D040A03GK-AAT
Temporary Spare Tire The following instructions for the tem- porary spare tire should be observed:
1. Check inflation pressure as soon as practical after installing the spare tire, and adjust to the specified pres- sure. The tire pressure should be periodically checked and maintained at the specified pressure while the tire is stored.
Spare Tire Pressure
Tire Size Inflation Pressure
T125/70 R16
420 kPa(60 psi)2. The spare tire should only be used temporarily and should be returned to the luggage compartment as soon as the original tire can be repaired or replaced.
3. Continuous use at speeds of over 50
mph (80 km/h) is not recommended.WHAT TO DO IN AN EMERGENCY
4. As the temporary spare tire is spe- cifically designed for your car, it should not be used on any other vehicle.
5. The temporary spare tire should not be used on any other wheels, nor should standard tires, snow tires, wheel covers or trim rings be used with the temporary spare wheel. If such use is attempted, damage to these items or other car components may occur.
6. The temporary spare tire pressure should be checked once a month while the tire is stored.
CAUTION:
o Do not use snow chains with your
temporary spare tire.
o Do not use more than one tempo-
rary spare tire at a time.
o Do not tow a trailer while the tem-
porary spare tire is installed.
gkflhma-3.p65
9/12/2006, 3:21 PM
WHAT TO DO IN AN EMERGENCY
10
! WARNING:
The temporary spare tire is for emer- gency use only. Do not operate your vehicle on this temporary spare at speeds over 50 mph (80 kmh). The original tire should be repaired or replaced as soon as is possible to avoid failure of the spare possibly leading to personal injury or death.
D040A01tg-AAT Full Size Spare Tire (If Installed) The following instructions for the FULL SIZE spare tire should be observed: Check inflation pressure as soon as practical after installing the spare tire, and adjust to the specified pressure. The tire pressure should be periodically checked and maintained at the speci- fied pressure while the tire is stored.
Spare Tire Pressure
Tire Size Inflation Pressure
Full Size 240 kPa (35 psi)
D040B01A-AAT
Handling the Spare Tire
HGK4010
Remove the installation bolt to remove the spare tire. To replace the spare tire in its storage compartment, tighten the bolt firmly with your fingers until there is no more play in the spare tire.gkflhma-3.p65
10
9/12/2006, 3:21 PM
IF YOU HAVE A FLAT TIRE
CHANGING A FLAT TIRE
WHAT TO DO IN AN EMERGENCY
11
D050A01A-AAT If a tire goes flat while you are driving:
D060A02A-AAT
D060B02GK-AAT
1. Obtain Spare Tire and Tool
1. Take your foot off the accelerator pedal and let the car slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off the road as this may cause a loss of control. When the car has slowed to such a speed that it is safe to do so, brake carefully and pull off the road. Drive off the road as far as possible and park on firm, level ground. If you are on a divided high- way, do not park in the median area between the two traffic lanes.
2. When the car is stopped, turn on your emergency hazard flashers, set the parking brake and put the transaxle in "P" (automatic) or reverse (manual transaxle).
3. Have all passengers get out of the car. Be sure they all get out on the side of the car that is away from traffic.
4. Change the tire following the instruc- tions provided on the following pages.
OGK036060
The procedure described on the follow- ing pages can be used to rotate tires as well as to change a flat tire. When preparing to change a flat tire, check to be sure the gear selector lever is in "P" (automatic transaxle) or reverse gear (manual transaxle) and that the parking brake is set, then:HGK4008
Remove the spare tire and remove the jack and tool bag from the trunk.gkflhma-3.p65
11
9/12/2006, 3:21 PM
WHAT TO DO IN AN EMERGENCY
12
D060C01A-AAT
2. Block the Wheel
D060D02A-AAT
3. Loosen Wheel Nuts
Flat tire
HGK4009
The jack is located behind the right side luggage trim. Remove the jack cover by unscrewing the bolts. Turn the jack end counterclockwise to lower the jack height by using a screw driver or wrench bar and remove it from the bracket.HGK4011
Block the wheel that is diagonally oppo- site from the flat to keep the vehicle from rolling when the car is raised on the jack.HGK4013
The wheel nuts should be loosened slightly before raising the car. To loosen the nuts, turn the wrench handle coun- terclockwise. When doing this, be sure that the socket is seated completely over the nut so it cannot slip off. For maximum leverage, position the wrench so the handle is to the left as shown in the drawing. Then, while holding the wrench near the end of the handle, push down on it with steady pressure. Do not remove the nuts at this time. Just loosen them about one-half turn.gkflhma-3.p65
12
9/12/2006, 3:21 PM
WHAT TO DO IN AN EMERGENCY
13
Raise the car high enough so that the fully inflated spare tire can be installed. To do this, you will need more ground clearance than is required to remove the flat tire.
! WARNING:
Do not get under the car when it is supported by the jack! This is very dangerous as the jack could fall and cause serious injury or death. No one should stay in the car while the jack is being used.
D060E01A-AAT
4. Put the Jack in Place
D060F02E-AAT
5. Raising the Car
OGK036401
The base of the jack should be placed on firm, level ground. The jack should be positioned as shown in the drawing.Wrench bar
Wheel nut wrench
D060F01MC After inserting a bar into the wheel nut wrench, install the bar into the jack as shown in the drawing. To raise the vehicle, turn the jack handle clockwise. As the jack begins to raise the vehicle, double check that it is properly posi- tioned and will not slip. If the jack is on soft ground or sand, place a board, brick, flat stone or other object under the base of the jack to keep it from sinking.
gkflhma-3.p65
13
9/12/2006, 3:21 PM
WHAT TO DO IN AN EMERGENCY
14
D060G02Y-AAT
6. Changing Wheels
OGK036403
Loosen the wheel nuts and remove them with your fingers. Slide the wheel off the studs and lay it flat so it cannot roll away. To put the wheel on the hub, pick up the spare tire, line up the holes with the studs and slide the wheel onto them. If this is difficult, tip the wheel slightly and get the top hole in the wheel lined up with the top stud. Then jiggle the wheel back and forth until the wheel can be slid over the other studs.OGK036603
! WARNING:
Wheels and wheel covers may have sharp edges. Handle them carefully to avoid possible severe injury. Be- fore putting the wheel into place, be sure that there is nothing on the hub or wheel (such as mud, tar, gravel, etc.) that interferes with the wheel from fitting solidly against the hub. If there is, remove it. If there is not good contact on the mounting sur- face between the wheel and hub, the
wheel nuts could come loose and cause the loss of a wheel. Loss of a wheel may result in loss of control of the vehicle. This may cause serious injury or death.
D060H02Y-AAT
7. Reinstall Wheel Nuts
OGK036604
To reinstall the wheel, hold it on the studs, put the wheel nuts on the studs and tighten them finger tight. The nuts should be installed with their small di-
gkflhma-3.p65
14
9/12/2006, 3:21 PM
ameter ends directed inward. Jiggle the tire to be sure it is completely seated, then tighten the nuts as much as pos- sible with your fingers again.
D060I01E-AAT
8. Lower Vehicle and Tighten Nuts
on the wrench handle or use an exten- sion pipe over the wrench handle. Go around the wheel tightening every other nut until they are all tight. Then double-check each nut for tightness. After changing wheels, have a techni- cian tighten the wheel nuts to their proper torque as soon as possible.
Wheel nut tightening torque: Steel wheel & aluminium alloy wheel: 65-80 lb.ft (900-1,100kg.cm)
HGK4014
Lower the car to the ground by turning the wheel nut wrench counterclock- wise. Then position the wrench as shown in the drawing and tighten the wheel nuts. Be sure the socket is seated completely over the nut. Do not stand
WHAT TO DO IN AN EMERGENCY
15
D060J01FC-GAT
After Changing Wheels
OGK036605
If you have a tire gauge, remove the valve cap and check the air pressure. If the pressure is lower than recom- mended, drive slowly to the nearest service station and inflate to the correct pressure. If it is too high, adjust it until it is correct. Always reinstall the valve cap after checking or adjusting tire pressure. If the cap is not replaced, air may leak from the tire. If you lose a valve cap, buy another and install it as soon as possible.gkflhma-3.p65
15
9/12/2006, 3:21 PM
WHAT TO DO IN AN EMERGENCY
16
After you have changed wheels, al- ways secure the flat tire in its place in the luggage compartment and return the jack and tools to their proper stor- age locations.
IF YOUR VEHICLE MUST BE TOWED D080A01O-GAT If your vehicle has to be towed, it should be done by your Hyundai dealer or a commercial tow truck service. This will help assure that your vehicle is not damaged in towing. Also, profes- sionals are generally aware of local laws gov- erning towing. In any case, rather than risk damage to your car, it is suggested that you show this information to the tow truck operator. Be sure that a safety chain system is used and that all local laws are observed. It is recommended that your vehicle be towed with a wheel lift and dollies or flatbed equipment with all the wheels off the ground.
CAUTION:
incorrectly!
o Your vehicle can be damaged if towed
o Be sure the transaxle is in neutral. o When the engine will not start, be sure the steering is unlocked by placing the key in the "ACC" position.
D080B01O-GAT Towing the Vehicle
1)
2)
3)
dolly
HGK4030
Your vehicle can be towed by wheel lift type truck (1), (2) or flatbed equipment (3).
gkflhma-3.p65
16
9/12/2006, 3:21 PM
WHAT TO DO IN AN EMERGENCY
17
1) If the vehicle is being towed with the rear wheels on the ground, be sure the parking brake is released.
o Automatic Transaxle:
Be sure to use a towing dolly under the front wheels.
CAUTION:
o When towing the vehicle, take care not to cause damage to the bumper or under- body of the vehicle.
HGK4016
NOTE:
